[yocto] Sato Font-shadow ?

[Vellemans, Noel]

Hi,

I'm building the QEMU build...

'Where' are the video settings defined/specified ?

Regards Noel.



PS: made a typo on the org--post "sometimes  it is red, or red.. " had
to be "sometimes it is red, or yellow.."
 

-----Original Message-----
From: Gary Thomas [mailto:gary at mlbassoc.com] 
Sent: 5Oct11 15:45
To: Vellemans, Noel
Cc: yocto at yoctoproject.org
Subject: Re: [yocto] Sato Font-shadow ?

On 2011-10-05 07:40, Vellemans, Noel wrote:
>
> Hi all
>
>
> I've build the beta-test build [wget 
> _http://git.yoctoproject.org/cgit/cgit.cgi/poky/snapshot/poky-f8cddd74
> 574756174a82c856cecdeb6f83b9dea5.tar.bz2_] { core-image-sato }
>
> The build succeeds but there is 'STRANGE' thing, the fonts seem to 
> contain a shadow, this shadow color is not always the same color
(sometimes it is red, or red.. or whatever combination).
>
> The best place where you can see it is on the CLOCK that is displayed
on the top of the screen, another place where you can see it is when you
open a terminal window.
>
> Anyone that has seen the same behavior ?
> Where do I start looking ?
>
> Regards Noel
>
> NOTE: If I do replace the rootfs with one from the yocto web-site...
this faultly-'shadow'-behavoir is gone.

What's your hardware platform?  I saw this on a BeagleBoard [equivalent]
due to improper video settings.

--
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
)