[yocto] [PATCH 1/4] meta-emenlow: update README

[tom.zanussi at intel.com]

From: Tom Zanussi <tom.zanussi at intel.com>

Update meta-emenlow to reflect the new image names and a couple
other minor cleanups.

Signed-off-by: Tom Zanussi <tom.zanussi at intel.com>
---
 meta-emenlow/README |   15 ++++++++-------
 1 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/meta-emenlow/README b/meta-emenlow/README
index 6592a70..fc3317e 100644
--- a/meta-emenlow/README
+++ b/meta-emenlow/README
@@ -40,8 +40,8 @@ To enable the emenlow layer, add the emenlow MACHINE to local.conf:
 
 You should then be able to build an emenlow image as such:
 
-  $ source poky-init-build-env
-  $ bitbake poky-image-sato-live
+  $ source oe-init-build-env
+  $ bitbake core-image-sato
 
 At the end of a successful build, you should have a live image that
 you can boot from a USB flash drive (see instructions on how to do
@@ -51,10 +51,11 @@ As an alternative to downloading the BSP tarball, you can also work
 directly from the meta-intel git repository.  For each BSP in the
 'meta-intel' repository, there are multiple branches, one
 corresponding to each major release starting with 'laverne' (0.90), in
-addition to the latest code which tracks the current master.  Instead
-of extracting a BSP tarball at the top level of your yocto build tree,
-you can equivalently check out the appropriate branch from the
-meta-intel repository at the same location.
+addition to the latest code which tracks the current master (note that
+not all BSPs are present in every release).  Instead of extracting a
+BSP tarball at the top level of your yocto build tree, you can
+equivalently check out the appropriate branch from the meta-intel
+repository at the same location.
 
 
 II. Booting the images in /binary
@@ -67,7 +68,7 @@ Under Linux, insert a USB flash drive.  Assuming the USB flash drive
 takes device /dev/sdf, use dd to copy the live image to it.  For
 example:
 
-# dd if=poky-image-sato-live-emenlow-20101207053738.hddimg of=/dev/sdf
+# dd if=core-image-sato-emenlow-20101207053738.hddimg of=/dev/sdf
 # sync
 # eject /dev/sdf
 
-- 
1.7.0.4