[yocto] ADT installer
Rifenbark, Scott M
scott.m.rifenbark at intel.com
Wed Nov 23 12:37:54 PST 2011
Jim,
Glad you got it working. Your efforts did help me find an old URL that I replaced.
Thanks,
Scott
-----Original Message-----
From: Jim Abernathy [mailto:jfabernathy at gmail.com]
Sent: Wednesday, November 23, 2011 11:11 AM
To: Rifenbark, Scott M
Cc: yocto at yoctoproject.org
Subject: RE: [yocto] ADT installer
On Wed, 2011-11-23 at 18:22 +0000, Rifenbark, Scott M wrote:
> Jim,
>
> My machine finished and it built the adt_installer.tar.bz2 in ~/yocto-project/build/tmp/deploy/sdk as advertised.
>
> The only change I made was the URL change to get the Edison tarball using wget.
>
> Scott
>
Okay, I see my problem. If you look at the instructions in the manual,
$ source poky-edison-6.0/oe-init-build-env
$ bitbake adt-installer
it does not start with cd'ing into the poky directory as other bitbake
sessions do. This sequence creates the build directory at the same
directory level as the poky-edison-6.0 directory. I was looking down in
poky-edison-6.0. What happened is the build directory was created at
the correct level for the way the command was spelled out. I just had
my head up my ....
Jim A
> -----Original Message-----
> From: James Abernathy [mailto:jfabernathy at gmail.com]
> Sent: Wednesday, November 23, 2011 9:28 AM
> To: Rifenbark, Scott M
> Cc: yocto at yoctoproject.org
> Subject: Re: [yocto] ADT installer
>
>
> On Nov 23, 2011, at 11:55 AM, Rifenbark, Scott M wrote:
>
> > Jim,
> >
> > Let me try and replicate this from the manual. I will get back momentarily.
> >
> > Scott
> >
> > -----Original Message-----
> > From: yocto-bounces at yoctoproject.org [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Jim Abernathy
> > Sent: Wednesday, November 23, 2011 8:45 AM
> > To: yocto at yoctoproject.org
> > Subject: [yocto] ADT installer
> >
> > I was following the ADT manual online, section 2.1.1.1, and everything
> > seemed to complete as expected, but adt_installer.tar.bz2 was not
> > created in the ..../build/tmp/deploy/sdk direction as documented. In
> > fact, there is no sdk directory in deploy. Is this a documentation
> > issue or is this not working. BTW, I could not find the tarball anywhere
> > on my Ubuntu development system.
> >
> > Jim A
> >
> >
> > _______________________________________________
> > yocto mailing list
> > yocto at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/yocto
>
> The instructions don't have you cd into the directory to execute the source oe-..... Not sure if that's a problem. I can rerun. I use the Edison Poky tarball and not the git.
>
> Jim A
More information about the yocto
mailing list