[yocto] ADT installer
Rifenbark, Scott M
scott.m.rifenbark at intel.com
Wed Nov 23 11:06:59 PST 2011
If you want to see the latest ADT manual with the correct URL for the Edison tarball, go to http://www.yoctoproject.org/documentation and click on the "Docs in Progress" on the right. That takes you to the manual I just updated, http://www.yoctoproject.org/docs/latest/adt-manual/adt-manual.html.
Scott
-----Original Message-----
From: Jim Abernathy [mailto:jfabernathy at gmail.com]
Sent: Wednesday, November 23, 2011 11:03 AM
To: Rifenbark, Scott M
Cc: yocto at yoctoproject.org
Subject: RE: [yocto] ADT installer
On Wed, 2011-11-23 at 18:22 +0000, Rifenbark, Scott M wrote:
> Jim,
>
> My machine finished and it built the adt_installer.tar.bz2 in ~/yocto-project/build/tmp/deploy/sdk as advertised.
>
> The only change I made was the URL change to get the Edison tarball using wget.
>
> Scott
>
Okay, I'll go back to a fresh install. I just use the Poky-edison I had
used for a previous bitbake for a boot image.
Jim A
> -----Original Message-----
> From: James Abernathy [mailto:jfabernathy at gmail.com]
> Sent: Wednesday, November 23, 2011 9:28 AM
> To: Rifenbark, Scott M
> Cc: yocto at yoctoproject.org
> Subject: Re: [yocto] ADT installer
>
>
> On Nov 23, 2011, at 11:55 AM, Rifenbark, Scott M wrote:
>
> > Jim,
> >
> > Let me try and replicate this from the manual. I will get back momentarily.
> >
> > Scott
> >
> > -----Original Message-----
> > From: yocto-bounces at yoctoproject.org [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Jim Abernathy
> > Sent: Wednesday, November 23, 2011 8:45 AM
> > To: yocto at yoctoproject.org
> > Subject: [yocto] ADT installer
> >
> > I was following the ADT manual online, section 2.1.1.1, and everything
> > seemed to complete as expected, but adt_installer.tar.bz2 was not
> > created in the ..../build/tmp/deploy/sdk direction as documented. In
> > fact, there is no sdk directory in deploy. Is this a documentation
> > issue or is this not working. BTW, I could not find the tarball anywhere
> > on my Ubuntu development system.
> >
> > Jim A
> >
> >
> > _______________________________________________
> > yocto mailing list
> > yocto at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/yocto
>
> The instructions don't have you cd into the directory to execute the source oe-..... Not sure if that's a problem. I can rerun. I use the Edison Poky tarball and not the git.
>
> Jim A
More information about the yocto
mailing list