[yocto] build failure on crownbay with EMGD
James Abernathy
jfabernathy at gmail.com
Wed Nov 9 12:03:01 PST 2011
On Wed, Nov 9, 2011 at 2:43 PM, Tom Zanussi <tom.zanussi at intel.com> wrote:
>
>
> On Wed, 2011-11-09 at 10:24 -0800, James Abernathy wrote:
> >
> >
> > On Wed, Nov 9, 2011 at 12:56 PM, James Abernathy
> > <jfabernathy at gmail.com> wrote:
> >
> >
> > On Wed, Nov 9, 2011 at 12:51 PM, Tom Zanussi
> > <tom.zanussi at intel.com> wrote:
> > On Wed, 2011-11-09 at 09:41 -0800, James Abernathy
> > wrote:
> > > In the past I've built the crownbay-noemgd
> > successfully, using the
> > > Development Manual Appendix A corrected instructions
> > that have been
> > > patched. I thought I'd try my hand at building the
> > crownbay with EMGD
> > > this time. Following the instructions in the
> > Appendix A, but using
> > > the opposite instructions related to EMGD, plus
> > installing EMGD per
> > > the instructions in the README file in the
> > meta-crownbay directory, I
> > > got a long way into the build, but failed toward the
> > end in what looks
> > > like a dependance issue. Can someone spot what I
> > need to change???
> > >
> >
> >
> > Yes, you've hit the missing step added to the update
> > release notes here:
> >
> >
> http://www.yoctoproject.org/download/bsp/intel-atom-processor-e660-intel-platform-controller-hub-eg20t-development-kit-1
> >
> >
> > 7. Remove the following unused file from the emgd
> > binaries in order to
> > avoid a packaging error at build-time:
> > $ rm
> >
> meta-intel/common/recipes-graphics/xorg-xserver/emgd-driver-bin-1.8/lib/dri/emgd_drv_video.so
> >
> >
> > This was an omission in the README, queued for the
> > next edison point
> > release.
> >
> > If I remember my MeeGo stuff, then removing this file will
> > eliminate the ability to do Media decode acceleration??
> >
> >
> > Not sure what it takes to get past this error. Just removing the file
> > and rerunning bitbake gets the same error. Do I need
> > to reset something before rerunning???
> >
>
> You should bump the PR of emgd-driver-bin_1.8.bb to get it to use the
> new contents i.e.
>
> change
>
> PR = "r7"
>
> to
>
> PR = "r8"
>
> To
Okay, that fixed the issue. Now, how was I to know that? Is that a basic
step in reruns? I'm guessing if I started from scratch and rm'ed the video
file the first time it would have run with PR = "r7"?
Let me know what I should have read to know about the PR setting
Thanks,
JIm A
>
> > Jim A
> >
> > Tom
> >
> > > NOTE: Running noexec task 4432 of 4436 (ID:
> > >
> > 715, /home/jim/poky/meta/recipes-kernel/linux/
> linux-yocto_3.0.bb,
> > > do_package_write)
> > > NOTE: package eglibc-locale-2.13-r16: task
> > do_package_write_rpm:
> > > Succeeded
> > > NOTE: Running task 4433 of 4436 (ID:
> > >
> > 8, /home/jim/poky/meta/recipes-sato/images/
> core-image-sato.bb,
> > > do_rootfs)
> > > NOTE: Running noexec task 4434 of 4436 (ID:
> > >
> > 260, /home/jim/poky/meta/recipes-core/eglibc/
> eglibc-locale_2.13.bb,
> > > do_package_write)
> > > NOTE: package core-image-sato-1.0-r0: task
> > do_rootfs: Started
> > > ERROR: Function 'do_rootfs' failed
> > >
> > (see
> /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608
> for further information)
> > > ERROR: Logfile of failure stored
> > >
> > in:
> /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608
> > > Log data follows:
> > > | Generating solve db
> > > for /home/jim/poky/build/tmp/deploy/rpm/mymachine...
> > > | total: 1 0.000000 MB
> > 1.251276 secs
> > > | fingerprint: 1179 0.007580 MB
> > 0.225419 secs
> > > | install: 393 0.000000 MB
> > 0.467978 secs
> > > | dbadd: 393 0.000000 MB
> > 0.458049 secs
> > > | dbget: 2413 0.000000 MB
> > 0.002657 secs
> > > | dbput: 393 1.816904 MB
> > 0.387933 secs
> > > | readhdr: 3931 3.623312 MB
> > 0.007842 secs
> > > | hdrload: 1965 5.352088 MB
> > 0.015769 secs
> > > | hdrget: 67287 0.000000 MB
> > 0.025251 secs
> > > | Generating solve db
> > for /home/jim/poky/build/tmp/deploy/rpm/core2...
> > > | total: 1 0.000000 MB
> > 30.690842 secs
> > > | fingerprint: 16377 0.192190 MB
> > 1.357263 secs
> > > | install: 5459 0.000000 MB
> > 9.185276 secs
> > > | dbadd: 5459 0.000000 MB
> > 8.997421 secs
> > > | dbget: 61190 0.000000 MB
> > 0.097393 secs
> > > | dbput: 5459 27.436448 MB
> > 8.057184 secs
> > > | readhdr: 54591 55.326554 MB
> > 0.216373 secs
> > > | hdrload: 27777 84.106654 MB
> > 0.241450 secs
> > > | hdrget: 982855 0.000000 MB
> > 0.367838 secs
> > > | Generating solve db
> > for /home/jim/poky/build/tmp/deploy/rpm/all...
> > > | total: 1 0.000000 MB
> > 0.123502 secs
> > > | fingerprint: 96 0.003258 MB
> > 0.004244 secs
> > > | install: 32 0.000000 MB
> > 0.065233 secs
> > > | dbadd: 32 0.000000 MB
> > 0.062755 secs
> > > | dbget: 585 0.000000 MB
> > 0.000230 secs
> > > | dbput: 32 0.259492 MB
> > 0.039171 secs
> > > | readhdr: 321 0.520536 MB
> > 0.000570 secs
> > > | hdrload: 160 0.772764 MB
> > 0.001263 secs
> > > | hdrget: 5288 0.000000 MB
> > 0.002207 secs
> > > | Generating solve db
> > for /home/jim/poky/build/tmp/deploy/rpm/all...
> > > | total: 1 0.000000 MB
> > 0.111927 secs
> > > | fingerprint: 96 0.003258 MB
> > 0.004173 secs
> > > | install: 32 0.000000 MB
> > 0.057706 secs
> > > | dbadd: 32 0.000000 MB
> > 0.055191 secs
> > > | dbget: 585 0.000000 MB
> > 0.000204 secs
> > > | dbput: 32 0.259492 MB
> > 0.034089 secs
> > > | readhdr: 321 0.520536 MB
> > 0.000673 secs
> > > | hdrload: 160 0.772764 MB
> > 0.001158 secs
> > > | hdrget: 5288 0.000000 MB
> > 0.001854 secs
> > > | Processing locale-base-en-us...
> > > | Processing locale-base-en-gb...
> > > | Processing task-core-boot...
> > > | Processing task-core-apps-console...
> > > | Processing task-core-ssh-dropbear...
> > > | Processing task-core-apps-x11-pimlico...
> > > | Processing task-core-x11-sato...
> > > | Processing zypper...
> > > | Processing task-core-x11-base...
> > > | Processing task-core-apps-x11-games...
> > > | Processing task-core-apps-x11-core...
> > > | Processing task-base-extended...
> > > | Processing rpm...
> > > | error: Failed dependencies:
> > > | libva.so.1 is needed by libegl1-1.8-r7.core2
> > > | ERROR: Function 'do_rootfs' failed
> > >
> > (see
> /home/jim/poky/build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_rootfs.29608
> for further information)
> > > NOTE: package core-image-sato-1.0-r0: task
> > do_rootfs: Failed
> > > ERROR: Task 8
> > >
> > (/home/jim/poky/meta/recipes-sato/images/
> core-image-sato.bb,
> > > do_rootfs) failed with exit code '1'
> > > ERROR:
> > '/home/jim/poky/meta/recipes-sato/images/
> core-image-sato.bb'
> > > failed
> > > jim at jim-ubuntu:~/poky/build$
> > >
> > >
> >
> >
> >
> >
> >
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20111109/20f42e0f/attachment.html>
More information about the yocto
mailing list