[yocto] Build error while following Appendix A. Yocto Project Development manual

[James Abernathy]

The odd thing is not only is the bzImage file is missing, but also is the
whole kernel directory that bzImage is supposed to be locate in.

/home/jim/poky/yocto-build/tmp/sysroots/mymachine/kernel/bzImage

In the sysroots/mymachine/ directory there is only:

lib/
shlibs/
usr/

Jim A

On Tue, Nov 1, 2011 at 3:55 PM, Tom Zanussi <tom.zanussi at intel.com> wrote:

> On Tue, 2011-11-01 at 12:48 -0700, James Abernathy wrote:
> > Just to clear up the basics, Prior to following Appendix A verbatim, I
> > did the following
> > 1. install prerequisites from GS guide
> > 2. git clone git://git.yoctoproject.org/poky
> > 3. cd poky
> > 4. git clone git://git.yoctoproject.org/meta-intel.git
> >
> > I did not install the poky-extras. I assumed it only had to be
> > installed if you installed the kernel source for modification like in
> > Appendix b
> >
>
> Yeah, normally, assuming you're using an existing kernel branch.  But
> you didn't get a build error for the kernel, so I'm assuming that's the
> case.
>
> Tom
>
> > Jim a
> >
> >
> >
> >
> > On Tue, Nov 1, 2011 at 3:40 PM, Tom Zanussi <tom.zanussi at intel.com>
> > wrote:
> >         Hi,
> >
> >         On Tue, 2011-11-01 at 11:37 -0700, James Abernathy wrote:
> >         > I tried to duplicate the Yocto Project Decelopment Manual
> >         Appendix A
> >         > build of a Crownbay NOEMGD image,  no changes just dulicate
> >         the
> >         > instructions.  This is using the latest Yocto 1.1.  I did
> >         get a long
> >         > way down the line, but had a fatal error in the last 2
> >         steps.
> >         >
> >         > The only change I had to make was related to A.5.2.4.  The
> >         commit
> >         > string for the SRCREV_meta_pn was different on the
> >         > git.yoctoproject.org/cgit/cgi for the Meta commit so I used
> >         what I
> >         > found online.  The first section of 126 task completed
> >         without error.
> >         > The next section of 4394 tasks failed on 4393.  Not sure if
> >         the error
> >         > is obvious, but I wanted to run it by someone. Console error
> >         log
> >         > below:
> >         >
> >
> >
> >         Hmm, not sure what's going on here - I'm sure this example was
> >         verified
> >         several times, but just to make sure, what you're doing is
> >         going through
> >         'Appendix A. BSP Development Example' verbatim and getting
> >         this?
> >
> >         The SRCREVs in either case look ok for this, so that shouldn't
> >         be the
> >         problem...
> >
> >         But let me go over the steps myself and see what I come up
> >         with - will
> >         let you know either way...
> >
> >         Tom
> >
> >
> >         >  NOTE: package core-image-sato-1.0-r0: task do_bootimg:
> >         Started
> >         > ERROR: Function 'build_boot_bin' failed
> >         >
> >         (see
> /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418
> for further information)
> >         > ERROR: Logfile of failure stored
> >         >
> >         in:
> /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418
> >         > Log data follows:
> >         > | install: cannot stat
> >         >
> >
> `/home/jim/poky/yocto-build/tmp/sysroots/mymachine/kernel/bzImage': No
> >         > such file or directory
> >         > | ERROR: Function 'build_boot_bin' failed
> >         >
> >         (see
> /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418
> for further information)
> >         > NOTE: package core-image-sato-1.0-r0: task do_bootimg:
> >         Failed
> >         > ERROR: Task 9
> >         > (/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb,
> >         > do_bootimg) failed with exit code '1'
> >         > ERROR:
> >         '/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb'
> >         > failed
> >         > jim at jim-ubuntu-10:~/poky/yocto-build$
> >         >
> >
> >
> >
> >
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20111101/f17bf40e/attachment.html>