[yocto] Build error while following Appendix A. Yocto Project Development manual

[James Abernathy]

Just to clear up the basics, Prior to following Appendix A verbatim, I did
the following
1. install prerequisites from GS guide
2. git clone git://git.yoctoproject.org/poky
3. cd poky
4. git clone git://git.yoctoproject.org/meta-intel.git

I did not install the poky-extras. I assumed it only had to be installed if
you installed the kernel source for modification like in Appendix b

Jim a



On Tue, Nov 1, 2011 at 3:40 PM, Tom Zanussi <tom.zanussi at intel.com> wrote:

> Hi,
>
> On Tue, 2011-11-01 at 11:37 -0700, James Abernathy wrote:
> > I tried to duplicate the Yocto Project Decelopment Manual Appendix A
> > build of a Crownbay NOEMGD image,  no changes just dulicate the
> > instructions.  This is using the latest Yocto 1.1.  I did get a long
> > way down the line, but had a fatal error in the last 2 steps.
> >
> > The only change I had to make was related to A.5.2.4.  The commit
> > string for the SRCREV_meta_pn was different on the
> > git.yoctoproject.org/cgit/cgi for the Meta commit so I used what I
> > found online.  The first section of 126 task completed without error.
> > The next section of 4394 tasks failed on 4393.  Not sure if the error
> > is obvious, but I wanted to run it by someone. Console error log
> > below:
> >
>
> Hmm, not sure what's going on here - I'm sure this example was verified
> several times, but just to make sure, what you're doing is going through
> 'Appendix A. BSP Development Example' verbatim and getting this?
>
> The SRCREVs in either case look ok for this, so that shouldn't be the
> problem...
>
> But let me go over the steps myself and see what I come up with - will
> let you know either way...
>
> Tom
>
> >  NOTE: package core-image-sato-1.0-r0: task do_bootimg: Started
> > ERROR: Function 'build_boot_bin' failed
> > (see
> /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418
> for further information)
> > ERROR: Logfile of failure stored
> > in:
> /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418
> > Log data follows:
> > | install: cannot stat
> > `/home/jim/poky/yocto-build/tmp/sysroots/mymachine/kernel/bzImage': No
> > such file or directory
> > | ERROR: Function 'build_boot_bin' failed
> > (see
> /home/jim/poky/yocto-build/tmp/work/mymachine-poky-linux/core-image-sato-1.0-r0/temp/log.do_bootimg.31418
> for further information)
> > NOTE: package core-image-sato-1.0-r0: task do_bootimg: Failed
> > ERROR: Task 9
> > (/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb,
> > do_bootimg) failed with exit code '1'
> > ERROR: '/home/jim/poky/meta/recipes-sato/images/core-image-sato.bb'
> > failed
> > jim at jim-ubuntu-10:~/poky/yocto-build$
> >
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20111101/eb66375d/attachment.html>