[yocto] where is the Sysroot Location?
Zhang, Jessica
jessica.zhang at intel.com
Wed Mar 23 14:59:31 PDT 2011
Simon,
Sorry missed your message below the image, the rootfs should be under
../build/tmp/deploy/images, use the files e.g.
poky-image-sato-sdk-qemux86-*.rootfs.tar.bz2. To bitbake meta-ide-support
won't build the rootfs file, to build it you need to do "bitbake
poky-image-sato-sdk" as an example...
Thanks,
Jessica
_____
From: yocto-bounces at yoctoproject.org [mailto:yocto-bounces at yoctoproject.org]
On Behalf Of Zhang, Jessica
Sent: Wednesday, March 23, 2011 12:12 PM
To: Li, Simon; Lu, Lianhao; yocto at yoctoproject.org
Subject: Re: [yocto] where is the Sysroot Location?
Simon,
Please set your sysroot location to the directory where you extract the
rootfs using the poky-extract-sdk. BTW, poky-extract-sdk should extract
sysroot based on the rootfs not the pseudo.
Thanks,
Jessica
_____
From: yocto-bounces at yoctoproject.org [mailto:yocto-bounces at yoctoproject.org]
On Behalf Of Li, Simon
Sent: Wednesday, March 23, 2011 2:27 AM
To: Lu, Lianhao; yocto at yoctoproject.org
Subject: Re: [yocto] where is the Sysroot Location?
Hi, Lianhao,
Thanks for your replying.
Actually, I already did "bitbake meta-ide-support".
And I use poky-extract-sdk to extract the pseudo.
However, when I clicked Run->External Tools->qemu_i586-poky-linux.
After kernel booting up , I got kernel panic because kernel panic - not
syncing, init not Found.
According to the status, I think I setup the wrong Sysroot location.
As the screenshot,
Screenshot.png
Since I did not find any full root file system after finishing the build,
could you tell me where I can make the full root file system?
Thanks very much.
Best Regards,
Simon
From: Lu, Lianhao
Sent: Tuesday, March 22, 2011 6:36 PM
To: Li, Simon; yocto at yoctoproject.org
Subject: RE: where is the Sysroot Location?
Hi Simon,
Before using the poky tree mode, you need to run "bitbake meta-ide-support"
within the poky tree in a terminal. The eclipse plug-in needs the output of
that to determine several configuration options for cross compilation.
Best Regards,
Lianhao
From: yocto-bounces at yoctoproject.org [mailto:yocto-bounces at yoctoproject.org]
On Behalf Of Li, Simon
Sent: Tuesday, March 22, 2011 11:48 AM
To: yocto at yoctoproject.org
Subject: [yocto] where is the Sysroot Location?
To whom may concern,
I tried configure the Yocto SDK.
Firstly, I need to config cross compiler options.
I choose Pocky Tree Mode.
I always get the error message, said, Yockto Configuration Error!
Specification Poky Tree Toolchain Root does not contain any toolchain yet.
Please run "bitbake meta-ide-support" to build the toolchain."
However, I assigned the toolchain directory which gcc resides, I still get
this prompt message.
Could anyone please tell me what I have done wrong.
Thanks.
Simon Li
Intel Software & Service Group
B1 #205 Tun-Hwa North Rd, Taipei, Taiwan
Desk
+886-2-2514-4287
Mobile
+886-987-303-523
E-Mail
simon.li at intel.com <mailto:gorden.nieh at intel.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110323/83cd2e77/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 28064 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110323/83cd2e77/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 8455 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110323/83cd2e77/attachment.bin>
More information about the yocto
mailing list