[yocto] Fullpass Test Report for Yocto M4 RC3 20110313 Build

Fri Mar 18 09:37:53 PDT 2011

Hi all,

       This is the fullpass test report for RC3 build 20110313. There are 7 new bugs found in this build. Among them, 2 block issues are that crownbay emgd build failed and i686 toolchain tarball are not copied to sharing folder. For BSP testing: S3 could not work on Crownbay/n450; 3D game running will meet libSDL error on Sugarbay; keyboard/mouse could not work with n450 image. For zypper/rpm, zypper still has issue with install/removal on most platforms. For sstate, a new bug is found when building poky-image-minimal.

       In summary, this build is much greener than RC2 with only few bugs in zypper and some specific bugs for BSPs. All new opened bugs in RC3 testing already have been looked by developers and some already fixed.

Test Summary
---------------------------------------
Test Result Summary

Component

Target

Status

Comments

BSP

SugarBay

GOOD

Zypper install/remove has issue; 3D game running failed;

¡¡

CrownBay

BLOCK

emgd crownbay build failed; matchbox-panel segfault; S3 fail on B0 board

¡¡

JasperForest

GOOD

The only issue is zypper install/remove bug

¡¡

Blacksand

Buggy

mouse/keyboard do not work in X window; zypper install/remove not work well

¡¡

Beagleboard

GOOD

Only one RTC issue exists

¡¡

Routerstationpro

GOOD

Only zypper install has issue

¡¡

Mpc8315e-rdb

GOOD

Only zypper install has issue

QEMU

qemux86

Buggy

Only zypper install/remove has issue

¡¡

qemux86-64

Buggy

Only zypper install/remove has issue

¡¡

qemuarm

Buggy

zypper could not work well

¡¡

qemuppc

Buggy

zypper could not work well

¡¡

qemumips

Buggy

Only zypper install has issue

SDK

¡¡

BLOCK

i686 toolchain not copied to sharing folder; unfs does not work with qemuppc;

Poky

¡¡

BUGGY

sstate and non-gplv3 build do not work correctly

Stress

¡¡

GOOD

Sugarbay pass 18 hours stress and Jasperforest pass 12 hours stress

Documentation

¡¡

GOOD

¡¡

¡¡

Critical bugs, more than 50% test cases are blocked

¡¡

Only Normal, Minor or Enhancement bugs, less than 10% test cases failed

¡¡

Normal, Major and Critical bugs, more than 10% test cases failed

Detailed Test Result for each component

Target

Total TCs

Not Run

Passed

Failed

Not testable (Blocked)

Crownbay noemgd Sato-SDK

54

0

46

5 (bug 804, 738, 882)

3 (bug 738, 882)

Sugarbay Sato-SDK

59

0

54

5 (bug 804, 883)

0

Jasperforest LSB-SDK

36

0

33

3 (bug 804)

0

n450 Sato-SDK

56

0

35

4 (bug 804, 613)

17 (bug 869, 613)

BeagleBoard Sato

14

0

13

1 (bug 767)

0

BeagleBoard Sato-SDK

21

0

20

1 (bug 767)

0

Routerstationpro Sato-SDK

30

0

28

2 (bug 845)

0

Mpc8315e-rdb Sato-SDK

29

0

26

2 (bug 841)

0

Qemux86-64 Sato

21

0

18

3 (bug 804)

0

Qemux86-64 Sato-SDK

24

0

21

3 (bug 804)

0

Qemux86 Sato

21

0

18

3 (bug 804)

0

Qemux86 Sato-SDK

24

0

21

3 (bug 804)

0

Qemumips Sato

21

0

19

2 (bug 845)

0

Qemumips Sato-SDK

24

0

22

2 (bug 845)

0

Qemuppc Sato

18

0

16

2 (bug 841)

0

Qemuppc Sato-SDK

21

0

17

4 (bug 841, 780)

0

Qemuarm Sato

21

0

19

2 (bug 489, 490)

0

Qemuarm Sato-SDK

24

0

22

2 (bug 489, 490)

0

SDK

3

0

0

1 (bug 414)

2 (bug 884)

Poky

8

0

6

2 (bug 712, 894)

0

Documentation

1

0

1

0

0

Stress

2

0

2

0

0

Total

532

0

457

53

22

* You can check the detailed test result in attachment for each target.

** The failed/blocked case number is listed with failed cases¡¯ bug number.

Images

http://autobuilder.pokylinux.org/nightly/20110313-2/

commit: a33a2cc024f9c9147c92c5da70d8fbb631b968f9

Issue Summary

Zypper/RPM:

1.     [zypper] zypper install failed on routerstationpro sdk image

http://bugzilla.pokylinux.org/show_bug.cgi?id=845

2.     [zypper] installation failure on ppc (nightly build 20110305-4)

http://bugzilla.pokylinux.org/show_bug.cgi?id=841

3.     [zypper] zypper can not search any packages after installed package by rpm on qemuarm

http://bugzilla.pokylinux.org/show_bug.cgi?id=827

4.     [zypper] zypper install does not work on qemux86/atom-pc

http://bugzilla.pokylinux.org/show_bug.cgi?id=803

5.     [zypper] zypper lose package information after zypper/rpm install/remove

http://bugzilla.pokylinux.org/show_bug.cgi?id=804

6.     rpm remove package error

http://bugzilla.pokylinux.org/show_bug.cgi?id=787

7.     [zypper] uname ¨Cm and repo arch difference

http://bugzilla.pokylinux.org/show_bug.cgi?id=489

8.     [zypper] installation failure on arm

http://bugzilla.pokylinux.org/show_bug.cgi?id=490

Poky:

1.     New! [sstate] do_configure failed with libtool-cross when local sstate cache used

http://bugzilla.pokylinux.org/show_bug.cgi?id=894

2.     Fail to build non-GPLv3 image

http://bugzilla.pokylinux.org/show_bug.cgi?id=712

SDK:

1.     New! [autobuilder] i686 toolchain not copied to sharing folder

http://bugzilla.pokylinux.org/show_bug.cgi?id=884

2.     [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS

http://bugzilla.pokylinux.org/show_bug.cgi?id=414

BSP:

1.     New! [crownbay] emgd crownbay build fail on xserver-xf86-emgd fetch

http://bugzilla.pokylinux.org/show_bug.cgi?id=885

2.     New! [crownbay] system could not enter into S3 with crownbay noemgd image

http://bugzilla.pokylinux.org/show_bug.cgi?id=882

3.     New! [Sugarbay] GFX 3D game test fail to run with sugarbay BSP image due to libsdl.so

http://bugzilla.pokylinux.org/show_bug.cgi?id=883

4.     New! [n450]Blacksand keyboard/mouse do not work on X window

http://bugzilla.pokylinux.org/show_bug.cgi?id=869

5.     Reopen! matchbox-panel segfault after X startup

http://bugzilla.pokylinux.org/show_bug.cgi?id=738

6.     [Blacksand]system cannot enter S3 standby mode

http://bugzilla.pokylinux.org/show_bug.cgi?id=613

7.     [beagleboard] Can not set RTC correctly

http://bugzilla.pokylinux.org/show_bug.cgi?id=767

Verified Fixed:

1.     [zypper] zypper segfault in qemumips sato/sdk images

http://bugzilla.pokylinux.org/show_bug.cgi?id=825

2.     [sstate] random error message shown when sstate is used

http://bugzilla.pokylinux.org/show_bug.cgi?id=788

3.     [sstate] only few setscene tasks run even with same build environment

http://bugzilla.pokylinux.org/show_bug.cgi?id=789

4.     meta-ide-support build fail with distro/bernard brarnch

http://bugzilla.pokylinux.org/show_bug.cgi?id=819

5.     [meta-intel] No LSB image for meta-intel BSP

http://bugzilla.pokylinux.org/show_bug.cgi?id=849

6.     [n450] blacksand could not boot up with n450 BSP image

http://bugzilla.pokylinux.org/show_bug.cgi?id=837

7.     The vnc client does not pop-up on qemumips-sato-sdk

http://bugzilla.pokylinux.org/show_bug.cgi?id=782

Best Regards,

Jiajun
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110319/060c11fb/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: M4-RC3_20110313_detail_testreport_fullpass.ods
Type: application/oleobject
Size: 28733 bytes
Desc: M4-RC3_20110313_detail_testreport_fullpass.ods
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110319/060c11fb/attachment.bin>