[yocto] Fullpass Test Report for Yocto M4 RC2 20110305 Build
Xu, Jiajun
jiajun.xu at intel.com
Sun Mar 13 20:38:34 PDT 2011
Hi all,
This is the fullpass test report for RC2 build 20110305. This build has a better quality than RC1. We have 5 blocked issues for RC2: no emgd crownbay image on autobuilder sharing folder; n450 image fails to boot on blacksand; sato-sdk image build failed for qemuppc; i686 toolchain not copied into sharing folder on autobuilder; No LSB image provided for meta-intel BSP. For the other testing targets, except for zypper function, most components could work well. For poky, sstate and non-gplv3 build still do not work correctly.
For bug fixing, the zypper search issue is fixed on qemux86-64 platform. The x11vnc icon click no response issue is also fixed.
Test Summary
---------------------------------------
Test Result Summary
Component
Target
Status
Comments
BSP
SugarBay
GOOD
Only partial zypper function not work 2D & 3D benchmarks run well on it
¡¡
CrownBay
BLOCK
No emgd crownbay image available; noemgd image works well
¡¡
JasperForest
GOOD
Only partial zypper function not work
¡¡
Blacksand
BLOCK
n450 image fail to boot on blacksand
¡¡
Beagleboard
GOOD
Only one RTC issue exists
¡¡
Routerstationpro
GOOD
Only partial zypper function not work
¡¡
Mpc8315e-rdb
GOOD
Only partial zypper function not work
QEMU
qemux86
GOOD
Only partial zypper function not work
¡¡
qemux86-64
GOOD
zypper search segfault (bug 721) is fixed
¡¡
qemuarm
GOOD
Only partial zypper function not work
¡¡
qemuppc
BLOCK
sato-sdk image build failed on autobuilder
¡¡
qemumips
BUGGY
zypper segfault with this target; vnc client not pop-up fixing patch is not in this commit yet.
Poky
¡¡
BUGGY
sstate and non-gplv3 build do not work correctly
Documentation
¡¡
GOOD
¡¡
SDK
¡¡
BLOCK
meta-ide-support not buildable with distro/bernard branch; unfs not work for qemuppc; i686 toolchain are not copied to sharing folder;
Complience Test
¡¡
In testing
LTP and POSIX testing is not finished yet, will be ready on wiki later.
¡¡
Critical bugs, more than 50% test cases are blocked
¡¡
Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
¡¡
Normal, Major and Critical bugs, more than 10% test cases failed
Detailed Test Result for each component
Target
Total TCs
Not Run
Passed
Failed
Not testable (Blocked)
Sugarbay Sato-SDK
61
0
58
3 (bug 804)
0
Jasperforest Sato-SDK
38
0
35
3 (bug 804)
0
BeagleBoard Sato
14
0
12
2 (bug 787, 767)
0
BeagleBoard Sato-SDK
23
0
21
2 (bug 787, 767)
0
Routerstationpro Sato-SDK
32
0
28
3 (bug 845, 787)
1 (bug 845)
Mpc8315e-rdb Sato-SDK
31
0
28
3 (bug 841, 787)
0
Qemux86-64 Sato
21
0
18
3 (bug 804)
0
Qemux86-64 Sato-SDK
26
0
23
3 (bug 804)
0
Qemux86 Sato
21
0
18
3 (bug 804)
0
Qemux86 Sato-SDK
26
0
23
3 (bug 804)
0
Qemumips Sato
21
0
15
3 (bug 825, 787, 782)
3 (bug 825)
Qemumips Sato-SDK
26
0
20
3 (bug 825, 787, 782)
3 (bug 825)
Qemuppc Sato
18
0
15
3 (bug 841, 787)
0
Qemuarm Sato
21
0
18
3 (bug 489, 490, 787)
0
Qemuarm Sato-SDK
26
0
23
3 (bug 489, bug 490, bug 787)
0
SDK
3
0
0
1 (bug 414, 819)
2 (i686 toolchain tarball not copied into sharing folder)
Poky
8
0
6
2 (bug 712, 788, 789)
0
Documentation
1
0
1
0
0
Total
417
0
362
46
9
* You can check the detailed test result in attachment for each target.
** The failed/blocked case number is listed with failed cases¡¯ bug number.
Images
http://autobuilder.pokylinux.org/nightly/20110305-4/
commit: c192fefd868be53c20dfd8bc44e3e815cf53a10a
Issue Summary
Zypper/RPM:
1. New! [zypper] zypper install failed on routerstationpro sdk image
http://bugzilla.pokylinux.org/show_bug.cgi?id=845
2. New! [zypper] installation failure on ppc (nightly build 20110305-4)
http://bugzilla.pokylinux.org/show_bug.cgi?id=841
3. New! [zypper] zypper can not search any packages after installed package by rpm on qemuarm
http://bugzilla.pokylinux.org/show_bug.cgi?id=827
4. New! [zypper] zypper segfault in qemumips sato/sdk images
http://bugzilla.pokylinux.org/show_bug.cgi?id=825
5. [zypper] zypper install does not work on qemux86/atom-pc
http://bugzilla.pokylinux.org/show_bug.cgi?id=803
6. [zypper] zypper lose package information after zypper/rpm install/remove
http://bugzilla.pokylinux.org/show_bug.cgi?id=804
7. rpm remove package error
http://bugzilla.pokylinux.org/show_bug.cgi?id=787
8. [zypper] package removal failure
http://bugzilla.pokylinux.org/show_bug.cgi?id=491
9. [zypper] uname ¨Cm and repo arch difference
http://bugzilla.pokylinux.org/show_bug.cgi?id=489
10. [zypper] installation failure on arm
http://bugzilla.pokylinux.org/show_bug.cgi?id=490
Poky:
1. [sstate] random error message shown when sstate is used
http://bugzilla.pokylinux.org/show_bug.cgi?id=788
2. [sstate] only few setscene tasks run even with same build environment
http://bugzilla.pokylinux.org/show_bug.cgi?id=789
3. Fail to build non-GPLv3 image
http://bugzilla.pokylinux.org/show_bug.cgi?id=712
SDK:
1. New! meta-ide-support build fail with distro/bernard brarnch
http://bugzilla.pokylinux.org/show_bug.cgi?id=819
2. [PPC] kernel panic when booting poky-image-sdk-qemuppc through UNFS
http://bugzilla.pokylinux.org/show_bug.cgi?id=414
BSP:
1. New! [meta-intel] No LSB image for meta-intel BSP
http://bugzilla.pokylinux.org/show_bug.cgi?id=849
2. New! [n450] blacksand could not boot up with n450 BSP image
http://bugzilla.pokylinux.org/show_bug.cgi?id=837
3. [blacksand] no sound even all options in amixer enabled
http://bugzilla.pokylinux.org/show_bug.cgi?id=798
4. [blacksand] configured audiosink is not working for video player
http://bugzilla.pokylinux.org/show_bug.cgi?id=799
5. [Connman] xuser must be granted privilege to start connman-applet
http://bugzilla.pokylinux.org/show_bug.cgi?id=779
6. [Blacksand] Some error information prompted when run dmesg command
http://bugzilla.pokylinux.org/show_bug.cgi?id=607
7. [Blacksand]system cannot enter S3 standby mode
http://bugzilla.pokylinux.org/show_bug.cgi?id=613
8. [beagleboard] Can not set RTC correctly
http://bugzilla.pokylinux.org/show_bug.cgi?id=767
Complience:
1. The process of installing LSB test suit and running LSB test on qemu-ppc is very slow
http://bugzilla.pokylinux.org/show_bug.cgi?id=793
2. LSB: A test case (lib/Config.t) failed during running perl test of LSB
http://bugzilla.pokylinux.org/show_bug.cgi?id=794
3. LSB: Some cases (libstdc++.so.6) failed on library check of LSB test
http://bugzilla.pokylinux.org/show_bug.cgi?id=795
4. LSB: Some cases related to locale failed on libstdcpp and cpp-t2c test of LSB
http://bugzilla.pokylinux.org/show_bug.cgi?id=796
Others:
1. gcc segfault on qemuppc (nightly build 20110226-1)
http://bugzilla.pokylinux.org/show_bug.cgi?id=780
2. The vnc client does not pop-up on qemumips-sato-sdk
http://bugzilla.pokylinux.org/show_bug.cgi?id=782
Best Regards,
Jiajun
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110314/f14d41cc/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: M4-RC2_20110305_detail_testreport_fullpass.ods
Type: application/oleobject
Size: 22059 bytes
Desc: M4-RC2_20110305_detail_testreport_fullpass.ods
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110314/f14d41cc/attachment.bin>
More information about the yocto
mailing list