[yocto] [PULL][linux-yocto] beagleboard: sync with meta-ti linux-omap_2.6.37
Koen Kooi
koen at dominion.thruhere.net
Sat Jun 18 01:11:18 PDT 2011
Op 18 jun 2011, om 01:18 heeft Darren Hart het volgende geschreven:
> From: Darren Hart <dvhart at linux.intel.com>
>
> The following commits have been pulled in from the meta-ti linux-omap_2.6.37
> recipe, with the exception of:
> USB: ehci: remove structure packing from ehci_def
> which hails from mainline and should be applied to yocto/base, while the rest
> should be applied to yocto/standard/beagleboard.
>
> Fixes [YOCTO #764]
> Fixes [YOCTO #765]
> Fixes [YOCTO #767]
>
> This brings linux-yocto in sync with the meta-ti linux-omap_2.6.37 recipe and
> significantly improves Beagleboard support in linux-yocto. As there are 115
> patches in total, and none of them are new, I have omitted them from the email.
You seem to be including the patches that patch the kernel from 37rc7 (or rc8, I forget) to .37 final, which shouldn't apply. So basically leave out the patches in the 'linus' directory. The camera interface also doesn't work, so the 'media' directory can be left out as well.
>
> The following changes since commit 9cb5c3fb1634e541cacceeb8c8cabe88afa5b080:
>
> Merge branch 'yocto/standard/base' into yocto/standard/beagleboard (2011-06-06 10:35:20 -0400)
>
> are available in the git repository at:
>
> git://git.yoctoproject.org/linux-yocto-2.6.37-contrib dvhart/yocto/standard/beagleboard
> http://git.yoctoproject.org/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=dvhart/yocto/standard/beagleboard
>
> Alexander Holler (1):
> arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
>
> Antti Koskipaa (1):
> v4l: v4l2_subdev userspace crop API
>
> Arik Nemtsov (1):
> wl12xx: Read MAC address from NVS file on HW startup
>
> Darren Hart (2):
> board-omap3beagle: whitespace cleanup
> board-omap3beagle: allow for building without wl1271
>
> Eliad Peller (1):
> wl1271: set wl->vif only if add_interface succeeded.
>
> Florian Westphal (1):
> bridge: stp: ensure mac header is set
>
> Jesper Juhl (1):
> ISDN, Gigaset: Fix memory leak in do_disconnect_req()
>
> Juuso Oikarinen (1):
> wl12xx: Unset bssid filter, ssid and bssid from firmware on disassoc
>
> Kevin Hilman (1):
> OMAP: CPUfreq: ensure policy is fully initialized
>
> Koen Kooi (10):
> omap3: beaglexm: fix DVI reset GPIO
> omap3: beaglexm: fix power on of DVI
> ARM: OMAP: beagleboard: Add infrastructure to do fixups based on
> expansionboard name passed by u-boot
> ARM: OMAP: beagleboard: pre-export GPIOs to userspace when using a
> Tincantools trainerboard
> modedb.c: add proper 720p60 mode
> ARM: OMAP: add omap_rev_* macros
> omap3: beagleboard: add WIP support for beagleboardtoys WL12xx board
> beagleboard: hack in support from xM rev C
> omap3: allow 1GHz mpurates
> BeagleBoard: Adjust USER button pin for xM
>
> Laurent Pinchart (35):
> v4l: Share code between video_usercopy and video_ioctl2
> v4l: subdev: Don't require core operations
> v4l: subdev: Merge v4l2_i2c_new_subdev_cfg and v4l2_i2c_new_subdev
> v4l: subdev: Add device node support
> v4l: subdev: Uninline the v4l2_subdev_init function
> v4l: subdev: Control ioctls support
> media: Media device node support
> media: Media device
> media: Entities, pads and links
> media: Entity use count
> media: Media device information query
> media: Entities, pads and links enumeration
> media: Links setup
> media: Pipelines and media streams
> v4l: Add a media_device pointer to the v4l2_device structure
> v4l: Make video_device inherit from media_entity
> v4l: Make v4l2_subdev inherit from media_entity
> v4l: Move the media/v4l2-mediabus.h header to include/linux
> v4l: Replace enums with fixed-sized fields in public structure
> v4l: Rename V4L2_MBUS_FMT_GREY8_1X8 to V4L2_MBUS_FMT_Y8_1X8
> v4l: Group media bus pixel codes by types and sort them
> alphabetically
> v4l: subdev: Add a new file operations class
> v4l: v4l2_subdev pad-level operations
> v4l: v4l2_subdev userspace format API
> v4l: v4l2_subdev userspace frame interval API
> v4l: subdev: Generic ioctl support
> v4l: Add subdev sensor g_skip_frames operation
> v4l: Include linux/videodev2.h in media/v4l2-ctrls.h
> v4l: Fix a use-before-set in the control framework
> v4l: Add 8-bit YUYV on 16-bit bus and SGRBG10 media bus pixel codes
> v4l: Add remaining RAW10 patterns w DPCM pixel code variants
> v4l: Add missing 12 bits bayer media bus formats
> v4l: Add 12 bits bayer pixel formats
> omap3: Add function to register omap3isp platform device structure
> OMAP3 ISP driver
>
> Lennert Buytenhek (1):
> ARM: pxa: PXA_ESERIES depends on FB_W100.
>
> Manjunatha Halli (7):
> drivers:media:radio: wl128x: FM Driver common header file
> drivers:media:radio: wl128x: FM Driver V4L2 sources
> drivers:media:radio: wl128x: FM Driver Common sources
> drivers:media:radio: wl128x: FM driver RX sources
> drivers:media:radio: wl128x: FM driver TX sources
> drivers:media:radio: wl128x: Kconfig & Makefile for wl128x driver
> drivers:media:radio: Update Kconfig and Makefile for wl128x FM
> driver.
>
> Nishanth Menon (2):
> omap3|4: opp: make omapx_opp_init non-static
> OMAP3: beagle xm: enable upto 1GHz OPP
>
> Pavan Savoy (2):
> drivers:misc:ti-st: change protocol parse logic
> Bluetooth: btwilink driver
>
> Peter 'p2' De Schrijver (1):
> OMAP: CPUfreq: ensure driver initializes after cpufreq framework and
> governors
>
> Rabin Vincent (1):
> USB: ehci: remove structure packing from ehci_def
>
> Rajendra Nayak (1):
> OMAP3 PM: CPUFreq driver for OMAP3
>
> Robert Nelson (2):
> omap: Beagle: detect new xM revision B
> xM audio fix from Ashok
>
> Sakari Ailus (2):
> v4l: subdev: Events support
> media: Entity graph traversal
>
> Sanjeev Premi (1):
> omap3: Add basic support for 720MHz part
>
> Sergio Aguirre (2):
> omap3: Remove unusued ISP CBUFF resource
> omap2: Fix camera resources for multiomap
>
> Shahar Levi (3):
> wl1271: 11n Support, Add Definitions
> wl1271: 11n Support, ACX Commands
> wl1271: 11n Support, functionality and configuration ability
>
> Silesh C V (1):
> OMAP: PM: CPUFREQ: Fix conditional compilation
>
> Stanimir Varbanov (1):
> v4l: Create v4l2 subdev file handle structure
>
> Steve Sakoman (18):
> mmc: don't display single block read console messages
> MTD: silence ecc errors on mtdblock0
> OMAP: DSS2: enable hsclk in dsi_pll_init for OMAP36XX
> drivers: net: smsc911x: return ENODEV if device is not found
> drivers: input: touchscreen: ads7846: return ENODEV if device is not
> found
> ASoC: enable audio capture by default for twl4030
> MFD: enable madc clock
> MFD: add twl4030 madc driver
> ARM: OMAP: Add twl4030 madc support to Overo
> ARM: OMAP: Add twl4030 madc support to Beagle
> OMAP: DSS2: Add support for Samsung LTE430WQ-F0C panel
> OMAP: DSS2: Add support for LG Philips LB035Q02 panel
> OMAP: DSS2: add bootarg for selecting svideo or composite for tv
> output
> ARM: OMAP2: mmc-twl4030: move clock input selection prior to vcc test
> RTC: add support for backup battery recharge
> ARM: OMAP: automatically set musb mode in platform data based on
> CONFIG options
> OMAP: DSS2: check for both cpu type and revision, rather than just
> revision
> OMAP: DSS2: Add DSS2 support for Overo
>
> Thara Gopinath (13):
> OMAP3: PM: Adding T2 enabling of smartreflex
> OMAP: Introduce a user list for each voltage domain instance in the
> voltage driver.
> OMAP: Introduce API in the OPP layer to find the opp entry
> corresponding to a voltage.
> OMAP: Introduce API to register a device with a voltagedomain
> OMAP: Introduce device specific set rate and get rate in omap_device
> structure
> OMAP: Voltage layer changes to support DVFS.
> OMAP: Introduce dependent voltage domain support.
> OMAP: Introduce device scale
> OMAP: Disable smartreflex across DVFS
> OMAP3: Introduce custom set rate and get rate APIs for scalable
> devices
> OMAP3: Update cpufreq driver to use the new set_rate API
> OMAP3: Introduce voltage domain info in the hwmod structures.
> OMAP3: Add voltage dependency table for VDD1.
>
> Thomas Weber (1):
> OMAP: Enable Magic SysRq on serial console ttyOx
>
> Tuukka Toivonen (1):
> ARM: OMAP3: Update Camera ISP definitions for OMAP3630
>
> Documentation/ABI/testing/sysfs-bus-media | 6 +
> Documentation/DocBook/Makefile | 5 +-
> Documentation/DocBook/media-entities.tmpl | 50 +
> Documentation/DocBook/media.tmpl | 3 +
> Documentation/DocBook/v4l/dev-subdev.xml | 307 +++
> Documentation/DocBook/v4l/media-controller.xml | 89 +
> Documentation/DocBook/v4l/media-func-close.xml | 59 +
> Documentation/DocBook/v4l/media-func-ioctl.xml | 116 +
> Documentation/DocBook/v4l/media-func-open.xml | 94 +
> .../DocBook/v4l/media-ioc-device-info.xml | 133 ++
> .../DocBook/v4l/media-ioc-enum-entities.xml | 308 +++
> Documentation/DocBook/v4l/media-ioc-enum-links.xml | 207 ++
> Documentation/DocBook/v4l/media-ioc-setup-link.xml | 93 +
> Documentation/DocBook/v4l/subdev-formats.xml | 2467 ++++++++++++++++++++
> Documentation/DocBook/v4l/v4l2.xml | 7 +
> Documentation/DocBook/v4l/vidioc-streamon.xml | 9 +
> .../v4l/vidioc-subdev-enum-frame-interval.xml | 146 ++
> .../DocBook/v4l/vidioc-subdev-enum-frame-size.xml | 148 ++
> .../DocBook/v4l/vidioc-subdev-enum-mbus-code.xml | 113 +
> Documentation/DocBook/v4l/vidioc-subdev-g-crop.xml | 149 ++
> Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xml | 174 ++
> .../DocBook/v4l/vidioc-subdev-g-frame-interval.xml | 135 ++
> Documentation/media-framework.txt | 353 +++
> Documentation/video4linux/v4l2-framework.txt | 129 +-
> arch/arm/mach-omap2/board-omap3beagle.c | 409 ++++-
> arch/arm/mach-omap2/board-overo.c | 247 ++-
> arch/arm/mach-omap2/clock.h | 14 +-
> arch/arm/mach-omap2/clock34xx.c | 2 +
> arch/arm/mach-omap2/control.h | 7 +
> arch/arm/mach-omap2/devices.c | 64 +-
> arch/arm/mach-omap2/devices.h | 17 +
> arch/arm/mach-omap2/hsmmc.c | 14 +-
> arch/arm/mach-omap2/id.c | 10 +
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 3 +
> arch/arm/mach-omap2/omap_twl.c | 16 +
> arch/arm/mach-omap2/opp3xxx_data.c | 66 +-
> arch/arm/mach-omap2/opp4xxx_data.c | 3 +-
> arch/arm/mach-omap2/pm.c | 110 +
> arch/arm/mach-omap2/voltage.c | 369 +++-
> arch/arm/mach-pxa/Kconfig | 1 +
> arch/arm/plat-omap/clock.c | 2 +-
> arch/arm/plat-omap/cpu-omap.c | 38 +-
> arch/arm/plat-omap/include/plat/cpu.h | 57 +
> arch/arm/plat-omap/include/plat/omap34xx.h | 16 +-
> arch/arm/plat-omap/include/plat/omap_device.h | 12 +-
> arch/arm/plat-omap/include/plat/voltage.h | 20 +
> arch/arm/plat-omap/omap_device.c | 139 ++
> block/blk-core.c | 7 +-
> drivers/base/power/opp.c | 28 +
> drivers/bluetooth/Kconfig | 10 +
> drivers/bluetooth/Makefile | 1 +
> drivers/bluetooth/btwilink.c | 397 ++++
> drivers/input/touchscreen/ads7846.c | 13 +-
> drivers/isdn/gigaset/capi.c | 1 +
> drivers/media/Kconfig | 22 +
> drivers/media/Makefile | 10 +-
> drivers/media/media-device.c | 382 +++
> drivers/media/media-devnode.c | 321 +++
> drivers/media/media-entity.c | 536 +++++
> drivers/media/radio/Kconfig | 3 +
> drivers/media/radio/Makefile | 1 +
> drivers/media/radio/radio-si4713.c | 2 +-
> drivers/media/radio/wl128x/Kconfig | 17 +
> drivers/media/radio/wl128x/Makefile | 6 +
> drivers/media/radio/wl128x/fmdrv.h | 244 ++
> drivers/media/radio/wl128x/fmdrv_common.c | 1677 +++++++++++++
> drivers/media/radio/wl128x/fmdrv_common.h | 402 ++++
> drivers/media/radio/wl128x/fmdrv_rx.c | 847 +++++++
> drivers/media/radio/wl128x/fmdrv_rx.h | 59 +
> drivers/media/radio/wl128x/fmdrv_tx.c | 425 ++++
> drivers/media/radio/wl128x/fmdrv_tx.h | 37 +
> drivers/media/radio/wl128x/fmdrv_v4l2.c | 580 +++++
> drivers/media/radio/wl128x/fmdrv_v4l2.h | 33 +
> drivers/media/video/Kconfig | 13 +
> drivers/media/video/Makefile | 4 +-
> drivers/media/video/cafe_ccic.c | 11 +-
> drivers/media/video/davinci/vpfe_capture.c | 2 +-
> drivers/media/video/davinci/vpif_capture.c | 2 +-
> drivers/media/video/davinci/vpif_display.c | 2 +-
> drivers/media/video/isp/Makefile | 13 +
> drivers/media/video/isp/cfa_coef_table.h | 601 +++++
> drivers/media/video/isp/gamma_table.h | 90 +
> drivers/media/video/isp/isp.c | 2221 ++++++++++++++++++
> drivers/media/video/isp/isp.h | 427 ++++
> drivers/media/video/isp/ispccdc.c | 2280 ++++++++++++++++++
> drivers/media/video/isp/ispccdc.h | 223 ++
> drivers/media/video/isp/ispccp2.c | 1189 ++++++++++
> drivers/media/video/isp/ispccp2.h | 101 +
> drivers/media/video/isp/ispcsi2.c | 1332 +++++++++++
> drivers/media/video/isp/ispcsi2.h | 169 ++
> drivers/media/video/isp/ispcsiphy.c | 247 ++
> drivers/media/video/isp/ispcsiphy.h | 74 +
> drivers/media/video/isp/isph3a.h | 117 +
> drivers/media/video/isp/isph3a_aewb.c | 374 +++
> drivers/media/video/isp/isph3a_af.c | 429 ++++
> drivers/media/video/isp/isphist.c | 520 ++++
> drivers/media/video/isp/isphist.h | 40 +
> drivers/media/video/isp/isppreview.c | 2120 +++++++++++++++++
> drivers/media/video/isp/isppreview.h | 214 ++
> drivers/media/video/isp/ispqueue.c | 1136 +++++++++
> drivers/media/video/isp/ispqueue.h | 185 ++
> drivers/media/video/isp/ispreg.h | 1589 +++++++++++++
> drivers/media/video/isp/ispresizer.c | 1710 ++++++++++++++
> drivers/media/video/isp/ispresizer.h | 150 ++
> drivers/media/video/isp/ispstat.c | 1100 +++++++++
> drivers/media/video/isp/ispstat.h | 169 ++
> drivers/media/video/isp/ispvideo.c | 1264 ++++++++++
> drivers/media/video/isp/ispvideo.h | 202 ++
> drivers/media/video/isp/luma_enhance_table.h | 154 ++
> drivers/media/video/isp/noise_filter_table.h | 90 +
> drivers/media/video/ivtv/ivtv-i2c.c | 11 +-
> drivers/media/video/mt9m001.c | 2 +-
> drivers/media/video/mt9v022.c | 4 +-
> drivers/media/video/ov6650.c | 10 +-
> drivers/media/video/s5p-fimc/fimc-capture.c | 2 +-
> drivers/media/video/sh_mobile_csi2.c | 6 +-
> drivers/media/video/sh_vou.c | 2 +-
> drivers/media/video/soc_camera.c | 2 +-
> drivers/media/video/soc_mediabus.c | 2 +-
> drivers/media/video/v4l2-common.c | 22 +-
> drivers/media/video/v4l2-ctrls.c | 2 +-
> drivers/media/video/v4l2-dev.c | 76 +-
> drivers/media/video/v4l2-device.c | 66 +-
> drivers/media/video/v4l2-ioctl.c | 216 +--
> drivers/media/video/v4l2-subdev.c | 346 +++
> drivers/mfd/Kconfig | 21 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/twl-core.c | 8 +
> drivers/mfd/twl4030-madc.c | 537 +++++
> drivers/misc/ti-st/st_core.c | 355 +--
> drivers/misc/ti-st/st_kim.c | 56 +-
> drivers/mmc/card/block.c | 4 +-
> drivers/mtd/nand/nand_ecc.c | 2 +-
> drivers/net/smsc911x.c | 4 +-
> drivers/net/wireless/wl12xx/Kconfig | 10 +
> drivers/net/wireless/wl12xx/wl1271.h | 11 +-
> drivers/net/wireless/wl12xx/wl1271_acx.c | 83 +
> drivers/net/wireless/wl12xx/wl1271_acx.h | 86 +
> drivers/net/wireless/wl12xx/wl1271_main.c | 161 +-
> drivers/net/wireless/wl12xx/wl1271_rx.c | 6 +
> drivers/net/wireless/wl12xx/wl1271_tx.c | 11 +
> drivers/rtc/rtc-twl.c | 25 +
> drivers/serial/omap-serial.c | 4 +
> drivers/video/modedb.c | 4 +
> drivers/video/omap2/displays/Kconfig | 12 +
> drivers/video/omap2/displays/Makefile | 2 +
> .../omap2/displays/panel-lgphilips-lb035q02.c | 244 ++
> .../omap2/displays/panel-samsung-lte430wq-f0c.c | 154 ++
> drivers/video/omap2/dss/dispc.c | 4 +-
> drivers/video/omap2/dss/dpi.c | 7 +-
> drivers/video/omap2/dss/venc.c | 22 +
> drivers/video/omap2/omapfb/omapfb-main.c | 10 +-
> fs/buffer.c | 3 +-
> include/linux/Kbuild | 4 +
> include/linux/i2c/twl.h | 1 +
> include/linux/i2c/twl4030-madc.h | 130 +
> include/linux/media.h | 132 ++
> include/linux/omap3isp.h | 631 +++++
> include/linux/opp.h | 8 +
> include/linux/ti_wilink_st.h | 40 +-
> include/linux/usb/ehci_def.h | 6 +-
> include/linux/v4l2-mediabus.h | 108 +
> include/linux/v4l2-subdev.h | 141 ++
> include/linux/videodev2.h | 4 +
> include/media/media-device.h | 95 +
> include/media/media-devnode.h | 97 +
> include/media/media-entity.h | 147 ++
> include/media/soc_mediabus.h | 3 +-
> include/media/v4l2-common.h | 18 +-
> include/media/v4l2-ctrls.h | 1 +
> include/media/v4l2-dev.h | 25 +-
> include/media/v4l2-device.h | 4 +
> include/media/v4l2-ioctl.h | 3 +
> include/media/v4l2-mediabus.h | 61 +-
> include/media/v4l2-subdev.h | 120 +-
> net/bridge/br_stp_bpdu.c | 2 +
> sound/soc/codecs/twl4030.c | 4 +-
> sound/soc/omap/omap-mcbsp.c | 3 +
> 178 files changed, 37220 insertions(+), 745 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-media
> create mode 100644 Documentation/DocBook/v4l/dev-subdev.xml
> create mode 100644 Documentation/DocBook/v4l/media-controller.xml
> create mode 100644 Documentation/DocBook/v4l/media-func-close.xml
> create mode 100644 Documentation/DocBook/v4l/media-func-ioctl.xml
> create mode 100644 Documentation/DocBook/v4l/media-func-open.xml
> create mode 100644 Documentation/DocBook/v4l/media-ioc-device-info.xml
> create mode 100644 Documentation/DocBook/v4l/media-ioc-enum-entities.xml
> create mode 100644 Documentation/DocBook/v4l/media-ioc-enum-links.xml
> create mode 100644 Documentation/DocBook/v4l/media-ioc-setup-link.xml
> create mode 100644 Documentation/DocBook/v4l/subdev-formats.xml
> create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-enum-frame-interval.xml
> create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-enum-frame-size.xml
> create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-enum-mbus-code.xml
> create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-g-crop.xml
> create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xml
> create mode 100644 Documentation/DocBook/v4l/vidioc-subdev-g-frame-interval.xml
> create mode 100644 Documentation/media-framework.txt
> create mode 100644 arch/arm/mach-omap2/devices.h
> create mode 100644 drivers/bluetooth/btwilink.c
> create mode 100644 drivers/media/media-device.c
> create mode 100644 drivers/media/media-devnode.c
> create mode 100644 drivers/media/media-entity.c
> create mode 100644 drivers/media/radio/wl128x/Kconfig
> create mode 100644 drivers/media/radio/wl128x/Makefile
> create mode 100644 drivers/media/radio/wl128x/fmdrv.h
> create mode 100644 drivers/media/radio/wl128x/fmdrv_common.c
> create mode 100644 drivers/media/radio/wl128x/fmdrv_common.h
> create mode 100644 drivers/media/radio/wl128x/fmdrv_rx.c
> create mode 100644 drivers/media/radio/wl128x/fmdrv_rx.h
> create mode 100644 drivers/media/radio/wl128x/fmdrv_tx.c
> create mode 100644 drivers/media/radio/wl128x/fmdrv_tx.h
> create mode 100644 drivers/media/radio/wl128x/fmdrv_v4l2.c
> create mode 100644 drivers/media/radio/wl128x/fmdrv_v4l2.h
> create mode 100644 drivers/media/video/isp/Makefile
> create mode 100644 drivers/media/video/isp/cfa_coef_table.h
> create mode 100644 drivers/media/video/isp/gamma_table.h
> create mode 100644 drivers/media/video/isp/isp.c
> create mode 100644 drivers/media/video/isp/isp.h
> create mode 100644 drivers/media/video/isp/ispccdc.c
> create mode 100644 drivers/media/video/isp/ispccdc.h
> create mode 100644 drivers/media/video/isp/ispccp2.c
> create mode 100644 drivers/media/video/isp/ispccp2.h
> create mode 100644 drivers/media/video/isp/ispcsi2.c
> create mode 100644 drivers/media/video/isp/ispcsi2.h
> create mode 100644 drivers/media/video/isp/ispcsiphy.c
> create mode 100644 drivers/media/video/isp/ispcsiphy.h
> create mode 100644 drivers/media/video/isp/isph3a.h
> create mode 100644 drivers/media/video/isp/isph3a_aewb.c
> create mode 100644 drivers/media/video/isp/isph3a_af.c
> create mode 100644 drivers/media/video/isp/isphist.c
> create mode 100644 drivers/media/video/isp/isphist.h
> create mode 100644 drivers/media/video/isp/isppreview.c
> create mode 100644 drivers/media/video/isp/isppreview.h
> create mode 100644 drivers/media/video/isp/ispqueue.c
> create mode 100644 drivers/media/video/isp/ispqueue.h
> create mode 100644 drivers/media/video/isp/ispreg.h
> create mode 100644 drivers/media/video/isp/ispresizer.c
> create mode 100644 drivers/media/video/isp/ispresizer.h
> create mode 100644 drivers/media/video/isp/ispstat.c
> create mode 100644 drivers/media/video/isp/ispstat.h
> create mode 100644 drivers/media/video/isp/ispvideo.c
> create mode 100644 drivers/media/video/isp/ispvideo.h
> create mode 100644 drivers/media/video/isp/luma_enhance_table.h
> create mode 100644 drivers/media/video/isp/noise_filter_table.h
> create mode 100644 drivers/media/video/v4l2-subdev.c
> create mode 100644 drivers/mfd/twl4030-madc.c
> create mode 100644 drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
> create mode 100644 drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
> create mode 100644 include/linux/i2c/twl4030-madc.h
> create mode 100644 include/linux/media.h
> create mode 100644 include/linux/omap3isp.h
> create mode 100644 include/linux/v4l2-mediabus.h
> create mode 100644 include/linux/v4l2-subdev.h
> create mode 100644 include/media/media-device.h
> create mode 100644 include/media/media-devnode.h
> create mode 100644 include/media/media-entity.h
>
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
More information about the yocto
mailing list