[yocto] [PATCH 1/3][KERNEL] meta: add eg20t feature

[Tom Zanussi]

On Mon, 2011-07-11 at 09:49 -0700, Darren Hart wrote:
> That is quite the assortment of config bits - are all of these necessary
> to explicitly support the eg20t? I'd like to see minimal config
> fragments both for simplicity as well as avoiding unnecessary kernel
> tool warnings about redefinitions.
> 

Yes, I agree, I would also like to see these split up, but I think that
would be better done as part of our ongoing general option cleanup.

The particular reason for doing this now is to simply re-use the
existing crownbay bits as-is for a new BSP.

Once I have time and can get back to the option cleanup I started with
the romley options, I'll clean this up too, but at the moment have
bigger fish to fry...

Tom

> --
> Darren
> 
> On 07/10/2011 09:26 AM, tom.zanussi at intel.com wrote:
> > From: Tom Zanussi <tom.zanussi at intel.com>
> > 
> > Option group for Intel Platform Controller Hub EG20T (Topcliff).
> > 
> > Signed-off-by: Tom Zanussi <tom.zanussi at intel.com>
> > ---
> >  meta/cfg/kernel-cache/features/eg20t/eg20t.cfg |   39 ++++++++++++++++++++++++
> >  meta/cfg/kernel-cache/features/eg20t/eg20t.scc |    1 +
> >  2 files changed, 40 insertions(+), 0 deletions(-)
> >  create mode 100644 meta/cfg/kernel-cache/features/eg20t/eg20t.cfg
> >  create mode 100644 meta/cfg/kernel-cache/features/eg20t/eg20t.scc
> > 
> > diff --git a/meta/cfg/kernel-cache/features/eg20t/eg20t.cfg b/meta/cfg/kernel-cache/features/eg20t/eg20t.cfg
> > new file mode 100644
> > index 0000000..225581c
> > --- /dev/null
> > +++ b/meta/cfg/kernel-cache/features/eg20t/eg20t.cfg
> > @@ -0,0 +1,39 @@
> > +# Hardware support for the Platform Controller Hub EG20T
> > +
> > +CONFIG_PCH_DMA=y
> > +CONFIG_PCH_UART_DMA=y
> > +CONFIG_SERIAL_8250_PCI=y
> > +CONFIG_SERIAL_8250_PCH=y
> > +CONFIG_SERIAL_8250_PCH_DMA=y
> > +
> > +CONFIG_SERIAL_PCH_UART=y
> > +CONFIG_SERIAL_CORE=y
> > +
> > +CONFIG_SPI=y
> > +CONFIG_SPI_BITBANG=y
> > +CONFIG_SPI_GPIO=y
> > +CONFIG_SPI_TOPCLIFF_PCH=y
> > + 
> > +CONFIG_MISC_DEVICES=y
> > +CONFIG_PCH_PHUB=y
> > +
> > +CONFIG_NETDEVICES=y
> > +CONFIG_NETDEV_1000=y
> > +CONFIG_PCH_GBE=y
> > +
> > +CONFIG_PCH_USBDEV=y
> > +CONFIG_USB_GADGET=y
> > +CONFIG_USB_GADGET_EG20T=y
> > +CONFIG_USB_GADGET_DUALSPEED=y
> > +CONFIG_USB_GADGET_SELECTED=y
> > +
> > +CONFIG_I2C_EG20T=y
> > +
> > +CONFIG_GPIOLIB=y
> > +CONFIG_GPIO_PCH=y
> > +
> > +CONFIG_PCH_IEEE1588=y
> > +
> > +CONFIG_CAN=y
> > +CONFIG_CAN_DEV=y
> > +CONFIG_PCH_CAN=y
> > diff --git a/meta/cfg/kernel-cache/features/eg20t/eg20t.scc b/meta/cfg/kernel-cache/features/eg20t/eg20t.scc
> > new file mode 100644
> > index 0000000..d690469
> > --- /dev/null
> > +++ b/meta/cfg/kernel-cache/features/eg20t/eg20t.scc
> > @@ -0,0 +1 @@
> > +kconf hardware eg20t.cfg
>