[yocto] [PATCH 3/3][KERNEL] meta/fri2: create initial BSP infrastructure

[Darren Hart]

On 07/10/2011 09:26 AM, tom.zanussi at intel.com wrote:
> From: Tom Zanussi <tom.zanussi at intel.com>
> 
> Inital BSP infrastructure for Intel Fish River Island II.
> 
> Signed-off-by: Tom Zanussi <tom.zanussi at intel.com>
> ---
>  meta/cfg/kernel-cache/bsp/fri2/fri2-standard.scc |    7 ++
>  meta/cfg/kernel-cache/bsp/fri2/fri2.cfg          |   69 ++++++++++++++++++++++
>  meta/cfg/kernel-cache/bsp/fri2/fri2.scc          |   12 ++++
>  3 files changed, 88 insertions(+), 0 deletions(-)
>  create mode 100644 meta/cfg/kernel-cache/bsp/fri2/fri2-standard.scc
>  create mode 100644 meta/cfg/kernel-cache/bsp/fri2/fri2.cfg
>  create mode 100644 meta/cfg/kernel-cache/bsp/fri2/fri2.scc
> 
> diff --git a/meta/cfg/kernel-cache/bsp/fri2/fri2-standard.scc b/meta/cfg/kernel-cache/bsp/fri2/fri2-standard.scc
> new file mode 100644
> index 0000000..b28b650
> --- /dev/null
> +++ b/meta/cfg/kernel-cache/bsp/fri2/fri2-standard.scc
> @@ -0,0 +1,7 @@
> +define KMACHINE fri2
> +define KTYPE standard
> +define KARCH i386
> +
> +scc_leaf ktypes/standard fri2
> +
> +include fri2.scc
> diff --git a/meta/cfg/kernel-cache/bsp/fri2/fri2.cfg b/meta/cfg/kernel-cache/bsp/fri2/fri2.cfg
> new file mode 100644
> index 0000000..5daa65b
> --- /dev/null
> +++ b/meta/cfg/kernel-cache/bsp/fri2/fri2.cfg
> @@ -0,0 +1,69 @@
> +CONFIG_X86_32=y
> +CONFIG_MATOM=y
> +CONFIG_PRINTK=y

surely CONFIG_PRINTK is part of standard?

> +
> +# Basic hardware support for the box - network, USB, PCI, sound
> +CONFIG_NETDEVICES=y
> +CONFIG_ATA=y
> +CONFIG_ATA_GENERIC=y
> +CONFIG_ATA_SFF=y
> +CONFIG_PCI=y
> +CONFIG_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_USB_SUPPORT=y
> +CONFIG_USB=y
> +CONFIG_USB_ARCH_HAS_EHCI=y
> +CONFIG_R8169=y
> +CONFIG_PATA_SCH=y
> +CONFIG_MMC_SDHCI_PCI=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_PCIEPORTBUS=y
> +CONFIG_NET=y
> +CONFIG_USB_UHCI_HCD=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_BLK_DEV_SD=y
> +CONFIG_CHR_DEV_SG=y
> +CONFIG_SOUND=y
> +CONFIG_SND=y
> +CONFIG_SND_HDA_INTEL=y
> +CONFIG_SATA_AHCI=y
> +
> +# Make sure these are on, otherwise the bootup won't be fun
> +CONFIG_EXT3_FS=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +CONFIG_MODULES=y
> +CONFIG_SHMEM=y
> +CONFIG_TMPFS=y
> +CONFIG_PACKET=y

I would expect all of these to be part of standard - especially INET and
EXT3. These should be part of our standard kernel policy.

> +
> +# These are needed for the Poulsbo kernel modules
> +CONFIG_I2C=y
> +CONFIG_AGP=y
> +CONFIG_VFAT_FS=y

Poulsbo graphics require VFAT?

> +CONFIG_PM=y
> +CONFIG_ACPI=y
> +CONFIG_FB=y
> +CONFIG_BACKLIGHT_LCD_SUPPORT=y
> +CONFIG_BACKLIGHT_CLASS_DEVICE=y
> +CONFIG_INPUT=y
> +CONFIG_VIDEO_V4L2=y
> +CONFIG_VIDEO_IVTV=y
> +CONFIG_MEDIA_SUPPORT=y
> +CONFIG_VIDEO_CAPTURE_DRIVERS=y
> +CONFIG_VIDEO_DEV=y
> +CONFIG_VIDEO_V4L2_COMMON=y
> +CONFIG_I2C_ALGOBIT=y
> +CONFIG_FB_CFB_COPYAREA=y
> +CONFIG_FB_CFB_IMAGEBLIT=y
> +CONFIG_FB_CFB_FILLRECT=y
> +CONFIG_VIDEO_FB_IVTV=y
> +
> +# Needed for booting (and using) USB memory sticks
> +CONFIG_USB_STORAGE=y
> +CONFIG_BLK_DEV_RAM=y
> +CONFIG_BLK_DEV_LOOP=y
> +CONFIG_BLK_DEV_INITRD=y
> +CONFIG_RD_GZIP=y
> +CONFIG_NLS_CODEPAGE_437=y
> +CONFIG_NLS_ISO8859_1=y

This should probably be a feature. Perhaps the VFAT was intended to go
here? Regardless, VFAT exists as a feature/config in meta already.

> diff --git a/meta/cfg/kernel-cache/bsp/fri2/fri2.scc b/meta/cfg/kernel-cache/bsp/fri2/fri2.scc
> new file mode 100644
> index 0000000..eca5cab
> --- /dev/null
> +++ b/meta/cfg/kernel-cache/bsp/fri2/fri2.scc
> @@ -0,0 +1,12 @@
> +kconf hardware fri2.cfg
> +
> +include features/eg20t/eg20t.scc
> +include features/intel-e1xxxx/intel-e1xxxx.scc
> +include features/dmaengine/dmaengine.scc
> +include features/serial/8250.scc
> +include features/ericsson-3g/f5521gw.scc
> +
> +include features/logbuf/size-normal.scc
> +
> +include features/latencytop/latencytop.scc
> +include features/profiling/profiling.scc

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel