[yocto] Eclipse Plugin Yocto Project Settings

[Diego Sueiro]

Jessica,

Here is the first output messages from poky-extract-sdk command:

Creating directory qemuarm
Extracting rootfs tarball using pseudo...
/home/dev/yocto/poky-4.0-build/tmp/sysroots/i686-linux/usr/bin/pseudo -P
/home/dev/yocto/poky-4.0-build/tmp/sysroots/i686-linux/usr tar -C "qemuarm"
-xjf "poky-4.0-build/tmp/deploy/images/poky-image-sato-qemuarm.tar.bz2"
pseudo: Couldn't open qemuarm/var/pseudo/pseudo.pid: No such file or
directory
...


And the environment-setup-armv5te-poky-linux-gnueabi file:

export
PATH=/home/dev/yocto/poky-4.0-build/tmp/sysroots/i686-linux/usr/bin/armv5te-poky-linux-gnueabi:/home/dev/yocto/poky-4.0-build/tmp/sysroots/armv5te-poky-linux-gnueabi/usr/bin/crossscripts:/home/dev/yocto/poky-4.0-build/tmp/sysroots/i686-linux/usr/sbin:/home/dev/yocto/poky-4.0-build/tmp/sysroots/i686-linux/usr/bin:/home/dev/yocto/poky-4.0-build/tmp/sysroots/i686-linux/sbin:/home/dev/yocto/poky-4.0-build/tmp/sysroots/i686-linux//bin:/home/dev/yocto/poky-laverne-4.0/scripts/..//bitbake//bin/:/home/dev/yocto/poky-laverne-4.0/scripts/..//scripts:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/dev/yocto/poky-laverne-4.0/scripts
export
PKG_CONFIG_SYSROOT_DIR=/home/dev/yocto/poky-4.0-build/tmp/sysroots/armv5te-poky-linux-gnueabi
export
PKG_CONFIG_PATH=/home/dev/yocto/poky-4.0-build/tmp/sysroots/armv5te-poky-linux-gnueabi/usr/lib/pkgconfig:/home/dev/yocto/poky-4.0-build/tmp/sysroots/armv5te-poky-linux-gnueabi/usr/share/pkgconfig
export CONFIG_SITE="/home/dev/yocto/poky-laverne-4.0/meta/site/endian-little
/home/dev/yocto/poky-laverne-4.0/meta/site/common-glibc
/home/dev/yocto/poky-laverne-4.0/meta/site/arm-common
/home/dev/yocto/poky-laverne-4.0/meta/site/arm-linux
/home/dev/yocto/poky-laverne-4.0/meta/site/common
/home/dev/yocto/poky-4.0-build/tmp/sysroots/armv5te-poky-linux-gnueabi/usr/share/arm-poky-linux-gnueabi_config_site.d/zlib_config
/home/dev/yocto/poky-4.0-build/tmp/sysroots/armv5te-poky-linux-gnueabi/usr/share/arm-poky-linux-gnueabi_config_site.d/eglibc_config
"
export CC=arm-poky-linux-gnueabi-gcc
export CXX=arm-poky-linux-gnueabi-g++
export GDB=arm-poky-linux-gnueabi-gdb
export TARGET_PREFIX=arm-poky-linux-gnueabi-
export CONFIGURE_FLAGS="--target=arm-poky-linux-gnueabi
--host=arm-poky-linux-gnueabi --build=i686-linux"
export CFLAGS="-march=armv5te -mtune=arm926ej-s"
export CXXFLAGS="-march=armv5te -mtune=arm926ej-s"
export
POKY_NATIVE_SYSROOT="/home/dev/yocto/poky-4.0-build/tmp/sysroots/i686-linux"
export
POKY_TARGET_SYSROOT="/home/dev/yocto/poky-4.0-build/tmp/sysroots/armv5te-poky-linux-gnueabi"





--
*dS
Diego Sueiro

/*long live rock 'n roll*/


On Fri, Jan 21, 2011 at 7:04 AM, Diego Sueiro <diego.sueiro at gmail.com>wrote:

> Jessica,
>
>
> On Thu, Jan 20, 2011 at 11:36 PM, Zhang, Jessica <jessica.zhang at intel.com>wrote:
>
>>  Diego,
>>
>> The errors that you ran into are not normal.  So can you tell me more
>> about your setup:
>> 1. how did you get your poky build tree, git clone from the latest
>> master or else way, when did you get it?
>>
>
> I'm using the poky build tree from
> http://www.yoctoproject.org/downloads/poky/poky-laverne-4.0.tar.bz2
>
>
>> 2. I'm assuming you run "bitbake meta-ide-support" and source the
>> generated environment-setup-armv5te-poky-linux-gnueabi file
>>
>
> That's right.
>
>
>>  3. I'd expect you get these error messages from poky-extract-sdk, right?
>>
>
> Yes. I invoked the poky-extract-sdk inside my destination directory.
>
>
>> Thanks,
>> Jessica
>>
>>  ------------------------------
>> *From:* Diego Sueiro [mailto:diego.sueiro at gmail.com]
>> *Sent:* Thursday, January 20, 2011 4:42 PM
>>
>> *To:* Zhang, Jessica
>> *Cc:* yocto at yoctoproject.org
>> *Subject:* Re: [yocto] Eclipse Plugin Yocto Project Settings
>>
>> Jessica,
>>
>> Thanks for the explanations.
>>
>> After sourcing environment-setup-armv5te-poky-linux-gnueabi file I get
>> lots of this message printed on the terminal:
>>
>> pseudo: Couldn't open .//var/pseudo/pseudo.pid: No such file or directory
>> pseudo: can't create socket: pseudo.socket (Too many open files)
>>
>> And some messages like:
>>
>>  tar: ./usr/games/inertia: Cannot change ownership to uid 0, gid 0:
>> Function not implemented
>>  tar: ./usr/games/inertia: Cannot change mode to rwxr-xr-x: Function not
>> implemented
>>
>>  Is it a normal behavior?
>>
>>
>>
>>  Rgds,
>>
>> --
>> *dS
>> Diego Sueiro
>>
>> /*long live rock 'n roll*/
>>
>>
>> On Thu, Jan 20, 2011 at 10:15 PM, Zhang, Jessica <jessica.zhang at intel.com
>> > wrote:
>>
>>> environment-setup-targetarch-poky-linux
>>
>>
>>  --
> *dS
> Diego Sueiro
>
> /*long live rock 'n roll*/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110121/1142f94d/attachment.html>