[yocto] kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.

Fri Dec 16 17:34:04 PST 2011

On 12/16/2011 05:22 PM, Bodke, Kishore K wrote:
> 
> With the attached Darren's kern-tools-native_git.bb file, build was success.
> Thanks
> Kishore.

See the patch I just sent:kern-tools: Include do_install() in bbappend
for what I believe to be the solution.

I suppose the proper solution would be to version the kern-tools-native
recipe when major things like that change, but given the nature of this
layer, I think the above patch is adequate.

--
Darren

> 
> -----Original Message-----
> From: Bodke, Kishore K
> Sent: Friday, December 16, 2011 5:07 PM
> To: Hart, Darren
> Cc: Bruce Ashfield; yocto at yoctoproject.org
> Subject: RE: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
> 
> Hi,
> I still get the same error below after changing the kern-tools-native_git.bb file.
> 
> SRCREV ?= "364437739c45a5e771d1f7b3ac73c35f1328fd97"
> PR = r11
> 
> 
> ERROR: Function 'do_kernel_configme' failed (see /usr/local/src/yocto_1_1/poky/build/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.27942 for further information)
> ERROR: Logfile of failure stored in: /usr/local/src/yocto_1_1/poky/build/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.27942
> Log data follows:
> | [INFO] doing kernel configme
> | [INFO] Branch yocto/standard/preempt-rt/base used by common-pc-preempt-rt.scc
> | [INFO] collecting configs in ./meta/meta-series
> | mv: cannot stat `/usr/local/src/yocto_1_1/poky/build/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/linux-crystalforest-preempt-rt-build/.tmp.config*': No such file or directory
> | creation of pre-processed config data failed
> | config of yocto/standard/preempt-rt/base (common-pc-preempt-rt.scc) failed
> | ERROR: Function 'do_kernel_configme' failed (see /usr/local/src/yocto_1_1/poky/build/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.27942 for further information)
> NOTE: package linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1: task do_kernel_configme: Failed
> NOTE: package gcc-cross-4.6.1+svnr175454-r10: task do_configure: Started
> ERROR: Task 716 (/usr/local/src/yocto_1_1/poky/meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb, do_kernel_configme) failed with exit code '1'
> 
> Thanks
> Kishore.
> 
> -----Original Message-----
> From: Hart, Darren
> Sent: Friday, December 16, 2011 3:08 PM
> To: Bodke, Kishore K
> Cc: Bruce Ashfield; yocto at yoctoproject.org
> Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
> 
> On 12/16/2011 02:12 PM, Bodke, Kishore K wrote:
>> I am building core-image-sato.
>> I have not changed any boot parameters.
>> Everything was default settings.
> 
> By image format I mean are you using a live image?
> core-image-sato-*.hddimg or are you formatting a disk and copying over
> contents of the rootfs? The kernel parameters are specified in
> meta-intel and meta-romley.
> 
> My guess is something has gone wrong in the kernel config and the kernel
> you built is missing things like vfat, ramfs support, etc.
> 
> Can you make your .config available as well as the various log.do* from
> the linux-yocto temp directory and the meta-series from the linux source
> directory?
> 
> --
> Darren
> 
>>
>> Thanks
>> Kishore.
>>
>> -----Original Message-----
>> From: Hart, Darren
>> Sent: Friday, December 16, 2011 12:18 PM
>> To: Bodke, Kishore K
>> Cc: Bruce Ashfield; yocto at yoctoproject.org
>> Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
>>
>> On 12/16/2011 11:39 AM, Bodke, Kishore K wrote:
>>> I will try out with the Bruce's patch.
>>>
>>> It stops after these below boot messages.
>>>
>>> Failed to execute /init
>>> Kernel panic - Not syncing: No init found. Try passing init=option to kernel
>>> Pid: 1 comm: swapper not tainited. 3.0.12-rt30-yocto-standard-prempt-rt+
>>
>> Sounds like it isn't mounting the root filesystem. What image format are
>> you using? What filesystem are you using for your rootfs? What are the
>> kernel parameters you pass at boot?
>>
>> --
>> Darren
>>
>>>
>>> Thanks
>>> Kishore.
>>> -----Original Message-----
>>> From: Hart, Darren
>>> Sent: Friday, December 16, 2011 11:33 AM
>>> To: Bodke, Kishore K
>>> Cc: Bruce Ashfield; yocto at yoctoproject.org
>>> Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
>>>
>>> On 12/16/2011 11:27 AM, Bodke, Kishore K wrote:
>>>> Hi,
>>>> Just wanted to know if this got fixed?
>>>
>>> Bruce sent a patch to test, it's included in the history below. Did you
>>> try this without the cherry-picked patches to see if it works for you?
>>> If not, could you please do so and let Bruce know? If it works for you,
>>> we can push it into the meta-kernel-dev layer.
>>>
>>>> Everytime I give the build I have to cerry-pick the patches.
>>>> But even after applying the patches, the build went through, but the image does not boot.
>>>
>>> Can you provide some more details here? Does the bootloader come up?
>>> Does the kernel output anything? What is the last thing displayed?
>>>
>>> --
>>> Darren
>>>
>>>>
>>>> Thanks
>>>> Kishore.
>>>>
>>>> -----Original Message-----
>>>> From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com]
>>>> Sent: Wednesday, December 14, 2011 6:07 AM
>>>> To: Hart, Darren
>>>> Cc: Bodke, Kishore K; yocto at yoctoproject.org
>>>> Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
>>>>
>>>> On 11-12-14 12:47 AM, Darren Hart wrote:
>>>>> On 12/13/2011 09:13 PM, Bruce Ashfield wrote:
>>>>>> On 11-12-13 6:26 PM, Bodke, Kishore K wrote:
>>>>>>> Yes.
>>>>>>> Its with poky Edison with poky-extras/meta-kernel-dev master branch I am using for my build.
>>>>>>
>>>>>> This is likely the problem. I use and test meta-kernel-dev everyday,
>>>>>> but that's always against master. I keep them in lockstep, since
>>>>>> meta-kernel-dev never really 'releases'.
>>>>>>
>>>>>> That being said, we can figure out a combination that works. The
>>>>>> best thing to do, would be to remove the kern-tools-native bbappend
>>>>>> from your meta-kernel-dev layer (for now). You don't want the new
>>>>>> tools.
>>>>>
>>>>> That won't work.  He is using the latest kernel which has needs
>>>>> merge_config.sh - as I ran into myself last week. I had Kishore
>>>>
>>>> There's still a way it will work, merge_config.sh is only ever
>>>> called from the kern-tools. There shouldn't be any non kern-tools
>>>> calls to merge_config.sh, the error:
>>>>
>>>>   mv: cannot stat
>>>>   `/usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-
>>>> poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/linux-crystalforest-preempt-rt-build/.tmp.config*':
>>>>   No such file or directory
>>>>
>>>> Could only come from using the latest configme script from the
>>>> kern-tools. So *something* newer than any SRCREV found on the
>>>> edison branch is being used there.
>>>>
>>>>> cherry-pick the last two patches to kern-tools-native from master and
>>>>> that got things going for him. So again, the question is: Why didn't the
>>>>> kern-tools-native bbappend do that for him?
>>>>
>>>> Aha. I may know the answer to that. The meta variant of the recipe looks
>>>> to assign the SRCREV in a way that the bbappend can't change. I did
>>>> this change during the day, but completely forgot when sending the
>>>> email. Can someone try this to see if it's the fix ?
>>>>
>>>> index fb66211..bc9a6b9 100644
>>>> --- a/meta/recipes-kernel/kern-tools/kern-tools-native_git.bb
>>>> +++ b/meta/recipes-kernel/kern-tools/kern-tools-native_git.bb
>>>> @@ -4,8 +4,8 @@ LIC_FILES_CHKSUM =
>>>> "file://git/tools/kgit;beginline=5;endline=9;md5=e2bf4415f3d8
>>>>
>>>>   DEPENDS = "git-native guilt-native"
>>>>
>>>> -SRCREV = "eb3ed64cea80d23ffb28dfeaeb02cdfe3fb29340"
>>>> -PR = r12
>>>> +SRCREV ?= "eb3ed64cea80d23ffb28dfeaeb02cdfe3fb29340"
>>>> +PR = r13
>>>>   PV = "0.1+git${SRCPV}"
>>>>
>>>> .. and Then I'll do a pull request.
>>>>
>>>> But as to why it's happening, I have no idea, autorev should pick it
>>>> up. That's down in the guts of bitbake, and for some reason the old
>>>> downloaded variant doesn't seem to be updating.
>>>>
>>>> Bruce
>>>>
>>>>>
>>>>> --
>>>>> Darren
>>>>>
>>>>>>
>>>>>> If that doesn't fix the problem, look for merge_log.txt in your
>>>>>> linux/meta/cfg/ directory structure and that will tell us exactly
>>>>>> what is going wrong.
>>>>>>
>>>>>> Bruce
>>>>>>
>>>>>>>
>>>>>>> Thanks
>>>>>>> Kishore.
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com]
>>>>>>> Sent: Tuesday, December 13, 2011 3:25 PM
>>>>>>> To: Bodke, Kishore K
>>>>>>> Cc: Hart, Darren; yocto at yoctoproject.org
>>>>>>> Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
>>>>>>>
>>>>>>> On 11-12-13 6:17 PM, Bodke, Kishore K wrote:
>>>>>>>> Yeah.  I am using local bare clone for the linux-yocto-3.0 and using poky-extras/meta-kernel-dev in my bblayers.conf for my build.
>>>>>>>> Sorry for not mentioning this before.
>>>>>>>
>>>>>>> Aha. This is completely different then. As Darren mentioned, the bbappend
>>>>>>> should be getting the latest tools, I can look into that.
>>>>>>>
>>>>>>> But to be clear, is this an edison branch + meta-kernel-dev ? That
>>>>>>> will cause problems at some point (and I'm not sure if that is what
>>>>>>> is happening here yet), since recipe updates to use the new tools
>>>>>>> wouldn't be reflected in that branch while you are fed the new tools.
>>>>>>>
>>>>>>> Cheers,
>>>>>>>
>>>>>>> Bruce
>>>>>>>
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>> Kishore.
>>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>> From: Hart, Darren
>>>>>>>> Sent: Tuesday, December 13, 2011 3:15 PM
>>>>>>>> To: Bruce Ashfield
>>>>>>>> Cc: Bodke, Kishore K; yocto at yoctoproject.org
>>>>>>>> Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
>>>>>>>>
>>>>>>>> On 12/13/2011 03:05 PM, Bruce Ashfield wrote:
>>>>>>>>> On 11-12-13 5:50 PM, Bodke, Kishore K wrote:
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> I get failure for the linux-yoctort_3.0.bb file for the poky Edison branch.
>>>>>>>>>>
>>>>>>>>>> Darren told that it was fixed and merged to master.
>>>>>>>>>
>>>>>>>>> This shouldn't be happening on edison at all. The changes to the
>>>>>>>>> kernel recipes/tools to use the merge_config.sh should never have
>>>>>>>>> showed up in edison. That's yocto 1.2 development work.
>>>>>>>>>
>>>>>>>>> So the fix for this is to find out what leaked into edison and
>>>>>>>>> revert it. I'll have a look at that later tonight.
>>>>>>>>
>>>>>>>> No no. Kishore is using meta-kernel-dev. As such he is getting the
>>>>>>>> latest linux-yocto repository and SRC_REVs. The question, I think, is
>>>>>>>> really why isn't the kern-tools-native bbappend from meta-kernel-dev
>>>>>>>> doing this for him.
>>>>>>>>
>>>>>>>> --
>>>>>>>> Darren
>>>>>>>>
>>>>>>>>>
>>>>>>>>> Bruce
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I wanted to bring to the list about this error message.
>>>>>>>>>>
>>>>>>>>>> ERROR: Function 'do_kernel_configme' failed (see
>>>>>>>>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>>>>>>>>> for further information)
>>>>>>>>>>
>>>>>>>>>> ERROR: Logfile of failure stored in:
>>>>>>>>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>>>>>>>>>
>>>>>>>>>> Log data follows:
>>>>>>>>>>
>>>>>>>>>> | [INFO] doing kernel configme
>>>>>>>>>>
>>>>>>>>>> | [INFO] Branch yocto/standard/preempt-rt/base used by
>>>>>>>>>> common-pc-preempt-rt.scc
>>>>>>>>>>
>>>>>>>>>> | [INFO] collecting configs in ./meta/meta-series
>>>>>>>>>>
>>>>>>>>>> | mv: cannot stat
>>>>>>>>>> `/usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/linux-crystalforest-preempt-rt-build/.tmp.config*':
>>>>>>>>>> No such file or directory
>>>>>>>>>>
>>>>>>>>>> | creation of pre-processed config data failed
>>>>>>>>>>
>>>>>>>>>> | config of yocto/standard/preempt-rt/base (common-pc-preempt-rt.scc) failed
>>>>>>>>>>
>>>>>>>>>> | ERROR: Function 'do_kernel_configme' failed (see
>>>>>>>>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>>>>>>>>> for further information)
>>>>>>>>>>
>>>>>>>>>> NOTE: package
>>>>>>>>>> linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1:
>>>>>>>>>> task do_kernel_configme: Failed
>>>>>>>>>>
>>>>>>>>>> ERROR: Task 716
>>>>>>>>>> (/usr/local/src/yocto_1_1_release/poky/meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb,
>>>>>>>>>> do_kernel_configme) failed with exit code '1'
>>>>>>>>>>
>>>>>>>>>> Waiting for 7 active tasks to finish:
>>>>>>>>>>
>>>>>>>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>>>>>>>
>>>>>>>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>>>>>
>>>>>>>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>>>>>>>
>>>>>>>>>> 3: font-util-native-1.2.0-r2.1 do_configure (pid 14632)
>>>>>>>>>>
>>>>>>>>>> 4: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>>>>>
>>>>>>>>>> 5: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>>>>>>>>
>>>>>>>>>> 6: opensp-native-1.5-r2 do_configure (pid 20213)
>>>>>>>>>>
>>>>>>>>>> Waiting for 6 active tasks to finish:
>>>>>>>>>>
>>>>>>>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>>>>>>>
>>>>>>>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>>>>>
>>>>>>>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>>>>>>>
>>>>>>>>>> 3: font-util-native-1.2.0-r2.1 do_configure (pid 14632)
>>>>>>>>>>
>>>>>>>>>> 4: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>>>>>
>>>>>>>>>> 5: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>>>>>>>>
>>>>>>>>>> NOTE: package opensp-native-1.5-r2: task do_configure: Succeeded
>>>>>>>>>>
>>>>>>>>>> Waiting for 5 active tasks to finish:
>>>>>>>>>>
>>>>>>>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>>>>>>>
>>>>>>>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>>>>>
>>>>>>>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>>>>>>>
>>>>>>>>>> 3: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>>>>>
>>>>>>>>>> 4: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>>>>>>>>
>>>>>>>>>> NOTE: package font-util-native-1.2.0-r2.1: task do_configure: Succeeded
>>>>>>>>>>
>>>>>>>>>> Waiting for 4 active tasks to finish:
>>>>>>>>>>
>>>>>>>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>>>>>>>
>>>>>>>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>>>>>
>>>>>>>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>>>>>>>
>>>>>>>>>> 3: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>>>>>
>>>>>>>>>> NOTE: package dbus-native-1.4.12-r0: task do_configure: Succeeded
>>>>>>>>>>
>>>>>>>>>> Waiting for 3 active tasks to finish:
>>>>>>>>>>
>>>>>>>>>> 0: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>>>>>
>>>>>>>>>> 1: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>>>>>>>
>>>>>>>>>> 2: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>>>>>
>>>>>>>>>> NOTE: package acl-native-2.2.51-r2: task do_configure: Succeeded
>>>>>>>>>>
>>>>>>>>>> Waiting for 2 active tasks to finish:
>>>>>>>>>>
>>>>>>>>>> 0: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>>>>>
>>>>>>>>>> 1: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>>>>>
>>>>>>>>>> NOTE: package kbproto-native-1_1.0.5-r0: task do_configure: Succeeded
>>>>>>>>>>
>>>>>>>>>> Waiting for 1 active tasks to finish:
>>>>>>>>>>
>>>>>>>>>> 0: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>>>>>
>>>>>>>>>> NOTE: package elfutils-native-0.148-r3: task do_install: Succeeded
>>>>>>>>>>
>>>>>>>>>> NOTE: package bison-native-2.5-r1: task do_configure: Succeeded
>>>>>>>>>>
>>>>>>>>>> ERROR:
>>>>>>>>>> '/usr/local/src/yocto_1_1_release/poky/meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb'
>>>>>>>>>> failed
>>>>>>>>>>
>>>>>>>>>> Thanks
>>>>>>>>>>
>>>>>>>>>> Kishore.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>
>>>
>>
>>
> 
> 
> --
> Darren Hart
> Intel Open Source Technology Center
> Yocto Project - Linux Kernel

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel