[yocto] kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.

[Bodke, Kishore K]

Hi,
Just wanted to know if this got fixed?  
Everytime I give the build I have to cerry-pick the patches.
But even after applying the patches, the build went through, but the image does not boot.

Thanks
Kishore.

-----Original Message-----
From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com] 
Sent: Wednesday, December 14, 2011 6:07 AM
To: Hart, Darren
Cc: Bodke, Kishore K; yocto at yoctoproject.org
Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.

On 11-12-14 12:47 AM, Darren Hart wrote:
> On 12/13/2011 09:13 PM, Bruce Ashfield wrote:
>> On 11-12-13 6:26 PM, Bodke, Kishore K wrote:
>>> Yes.
>>> Its with poky Edison with poky-extras/meta-kernel-dev master branch I am using for my build.
>>
>> This is likely the problem. I use and test meta-kernel-dev everyday,
>> but that's always against master. I keep them in lockstep, since
>> meta-kernel-dev never really 'releases'.
>>
>> That being said, we can figure out a combination that works. The
>> best thing to do, would be to remove the kern-tools-native bbappend
>> from your meta-kernel-dev layer (for now). You don't want the new
>> tools.
>
> That won't work.  He is using the latest kernel which has needs
> merge_config.sh - as I ran into myself last week. I had Kishore

There's still a way it will work, merge_config.sh is only ever
called from the kern-tools. There shouldn't be any non kern-tools
calls to merge_config.sh, the error:

  mv: cannot stat
  `/usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest- 
poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/linux-crystalforest-preempt-rt-build/.tmp.config*':
  No such file or directory

Could only come from using the latest configme script from the
kern-tools. So *something* newer than any SRCREV found on the
edison branch is being used there.

> cherry-pick the last two patches to kern-tools-native from master and
> that got things going for him. So again, the question is: Why didn't the
> kern-tools-native bbappend do that for him?

Aha. I may know the answer to that. The meta variant of the recipe looks
to assign the SRCREV in a way that the bbappend can't change. I did
this change during the day, but completely forgot when sending the
email. Can someone try this to see if it's the fix ?

index fb66211..bc9a6b9 100644
--- a/meta/recipes-kernel/kern-tools/kern-tools-native_git.bb
+++ b/meta/recipes-kernel/kern-tools/kern-tools-native_git.bb
@@ -4,8 +4,8 @@ LIC_FILES_CHKSUM = 
"file://git/tools/kgit;beginline=5;endline=9;md5=e2bf4415f3d8

  DEPENDS = "git-native guilt-native"

-SRCREV = "eb3ed64cea80d23ffb28dfeaeb02cdfe3fb29340"
-PR = r12
+SRCREV ?= "eb3ed64cea80d23ffb28dfeaeb02cdfe3fb29340"
+PR = r13
  PV = "0.1+git${SRCPV}"

.. and Then I'll do a pull request.

But as to why it's happening, I have no idea, autorev should pick it
up. That's down in the guts of bitbake, and for some reason the old
downloaded variant doesn't seem to be updating.

Bruce

>
> --
> Darren
>
>>
>> If that doesn't fix the problem, look for merge_log.txt in your
>> linux/meta/cfg/ directory structure and that will tell us exactly
>> what is going wrong.
>>
>> Bruce
>>
>>>
>>> Thanks
>>> Kishore.
>>>
>>> -----Original Message-----
>>> From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com]
>>> Sent: Tuesday, December 13, 2011 3:25 PM
>>> To: Bodke, Kishore K
>>> Cc: Hart, Darren; yocto at yoctoproject.org
>>> Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
>>>
>>> On 11-12-13 6:17 PM, Bodke, Kishore K wrote:
>>>> Yeah.  I am using local bare clone for the linux-yocto-3.0 and using poky-extras/meta-kernel-dev in my bblayers.conf for my build.
>>>> Sorry for not mentioning this before.
>>>
>>> Aha. This is completely different then. As Darren mentioned, the bbappend
>>> should be getting the latest tools, I can look into that.
>>>
>>> But to be clear, is this an edison branch + meta-kernel-dev ? That
>>> will cause problems at some point (and I'm not sure if that is what
>>> is happening here yet), since recipe updates to use the new tools
>>> wouldn't be reflected in that branch while you are fed the new tools.
>>>
>>> Cheers,
>>>
>>> Bruce
>>>
>>>>
>>>> Thanks
>>>> Kishore.
>>>>
>>>> -----Original Message-----
>>>> From: Hart, Darren
>>>> Sent: Tuesday, December 13, 2011 3:15 PM
>>>> To: Bruce Ashfield
>>>> Cc: Bodke, Kishore K; yocto at yoctoproject.org
>>>> Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
>>>>
>>>> On 12/13/2011 03:05 PM, Bruce Ashfield wrote:
>>>>> On 11-12-13 5:50 PM, Bodke, Kishore K wrote:
>>>>>> Hi,
>>>>>>
>>>>>> I get failure for the linux-yoctort_3.0.bb file for the poky Edison branch.
>>>>>>
>>>>>> Darren told that it was fixed and merged to master.
>>>>>
>>>>> This shouldn't be happening on edison at all. The changes to the
>>>>> kernel recipes/tools to use the merge_config.sh should never have
>>>>> showed up in edison. That's yocto 1.2 development work.
>>>>>
>>>>> So the fix for this is to find out what leaked into edison and
>>>>> revert it. I'll have a look at that later tonight.
>>>>
>>>> No no. Kishore is using meta-kernel-dev. As such he is getting the
>>>> latest linux-yocto repository and SRC_REVs. The question, I think, is
>>>> really why isn't the kern-tools-native bbappend from meta-kernel-dev
>>>> doing this for him.
>>>>
>>>> --
>>>> Darren
>>>>
>>>>>
>>>>> Bruce
>>>>>
>>>>>>
>>>>>> I wanted to bring to the list about this error message.
>>>>>>
>>>>>> ERROR: Function 'do_kernel_configme' failed (see
>>>>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>>>>> for further information)
>>>>>>
>>>>>> ERROR: Logfile of failure stored in:
>>>>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>>>>>
>>>>>> Log data follows:
>>>>>>
>>>>>> | [INFO] doing kernel configme
>>>>>>
>>>>>> | [INFO] Branch yocto/standard/preempt-rt/base used by
>>>>>> common-pc-preempt-rt.scc
>>>>>>
>>>>>> | [INFO] collecting configs in ./meta/meta-series
>>>>>>
>>>>>> | mv: cannot stat
>>>>>> `/usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/linux-crystalforest-preempt-rt-build/.tmp.config*':
>>>>>> No such file or directory
>>>>>>
>>>>>> | creation of pre-processed config data failed
>>>>>>
>>>>>> | config of yocto/standard/preempt-rt/base (common-pc-preempt-rt.scc) failed
>>>>>>
>>>>>> | ERROR: Function 'do_kernel_configme' failed (see
>>>>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>>>>> for further information)
>>>>>>
>>>>>> NOTE: package
>>>>>> linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1:
>>>>>> task do_kernel_configme: Failed
>>>>>>
>>>>>> ERROR: Task 716
>>>>>> (/usr/local/src/yocto_1_1_release/poky/meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb,
>>>>>> do_kernel_configme) failed with exit code '1'
>>>>>>
>>>>>> Waiting for 7 active tasks to finish:
>>>>>>
>>>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>>>
>>>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>
>>>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>>>
>>>>>> 3: font-util-native-1.2.0-r2.1 do_configure (pid 14632)
>>>>>>
>>>>>> 4: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>
>>>>>> 5: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>>>>
>>>>>> 6: opensp-native-1.5-r2 do_configure (pid 20213)
>>>>>>
>>>>>> Waiting for 6 active tasks to finish:
>>>>>>
>>>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>>>
>>>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>
>>>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>>>
>>>>>> 3: font-util-native-1.2.0-r2.1 do_configure (pid 14632)
>>>>>>
>>>>>> 4: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>
>>>>>> 5: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>>>>
>>>>>> NOTE: package opensp-native-1.5-r2: task do_configure: Succeeded
>>>>>>
>>>>>> Waiting for 5 active tasks to finish:
>>>>>>
>>>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>>>
>>>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>
>>>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>>>
>>>>>> 3: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>
>>>>>> 4: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>>>>
>>>>>> NOTE: package font-util-native-1.2.0-r2.1: task do_configure: Succeeded
>>>>>>
>>>>>> Waiting for 4 active tasks to finish:
>>>>>>
>>>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>>>
>>>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>
>>>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>>>
>>>>>> 3: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>
>>>>>> NOTE: package dbus-native-1.4.12-r0: task do_configure: Succeeded
>>>>>>
>>>>>> Waiting for 3 active tasks to finish:
>>>>>>
>>>>>> 0: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>
>>>>>> 1: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>>>
>>>>>> 2: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>
>>>>>> NOTE: package acl-native-2.2.51-r2: task do_configure: Succeeded
>>>>>>
>>>>>> Waiting for 2 active tasks to finish:
>>>>>>
>>>>>> 0: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>>>
>>>>>> 1: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>
>>>>>> NOTE: package kbproto-native-1_1.0.5-r0: task do_configure: Succeeded
>>>>>>
>>>>>> Waiting for 1 active tasks to finish:
>>>>>>
>>>>>> 0: bison-native-2.5-r1 do_configure (pid 20206)
>>>>>>
>>>>>> NOTE: package elfutils-native-0.148-r3: task do_install: Succeeded
>>>>>>
>>>>>> NOTE: package bison-native-2.5-r1: task do_configure: Succeeded
>>>>>>
>>>>>> ERROR:
>>>>>> '/usr/local/src/yocto_1_1_release/poky/meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb'
>>>>>> failed
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> Kishore.
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>
>