[Yocto-builds] buildbot failure in The Yocto Autobuilder on nightly-qa-systemd

[Saul Wold]

This looks like the same timeout issue everyone is chasing down and that 
Ross might have a handle on the issue based on screensaver or xinput.

Sau!


On 09/17/2013 04:14 PM, yocto-builds at yoctoproject.org wrote:
>
>         Build status: FAILURE
>
> Buildslave for this Build: *ab04*
> Complete logs for all build steps:
> http://autobuilder.yoctoproject.org:8011/builders/nightly-qa-systemd/builds/171
>
> Build Reason: Triggerable(trigger_nightly-qa-systemd)
> Build Properties:
>
>   * Contents of bblayers.conf (Note. LCONF_VERSION will not show up
>     correctly)
>     |LCONF_VERSION =
>     BBPATH = "${TOPDIR}"
>     BBFILES ?=""
>     BBLAYERS += " \
>     /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd/build/meta
>     \
>     /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd/build/meta-yocto
>     \
>     /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd/build/meta-yocto-bsp
>     \
>     "
>
>     |
>   * DEST :
>     /srv/www/vhosts/autobuilder.yoctoproject.org/pub/releases/1.5_M5.rc2
>   * Contents of auto.conf (local.conf for autobuilders)
>     |DISTRO = "poky"
>     PACKAGE_CLASSES = "package_rpm package_deb package_ipk"
>     BB_NUMBER_THREADS = "16"
>     PARALLEL_MAKE = "-j 16"
>     SDKMACHINE ?= "i686"
>     DL_DIR = "/srv/www/vhosts/autobuilder.yoctoproject.org/current_sources"
>     SSTATE_DIR ?= "/srv/www/vhosts/sstate.yoctoproject.org//"
>     MACHINE = "qemux86-64"
>     PREMIRRORS = ""
>     BB_GENERATE_MIRROR_TARBALLS = "1"
>     ADTREPO = "http://adtrepo.yoctoproject.org//1.4+snapshot"
>     DISTRO_FEATURES_append = " systemd"
>     VIRTUAL-RUNTIME_init_manager = "systemd"
>     DISTRO_FEATURES_BACKFILL_CONSIDERED = "sysvinit"
>
>     |
>   * MACHINE : qemux86-64
>   * branch : master
>   * branch_poky : master
>   * buildername : nightly-qa-systemd
>   * buildnumber : 171
>   * commit-description : yocto-1.5_M5.rc2
>   * commit_poky : e624d737b7117f00b81b389ab81570d1737cc339
>   * distroversion : 1.4+snapshot
>   * got_revision : e624d737b7117f00b81b389ab81570d1737cc339
>   * got_revision_poky : e624d737b7117f00b81b389ab81570d1737cc339
>   * layerversion_core : 3
>   * layerversion_yoctobsp : 2
>   * repository : git://git.yoctoproject.org/poky
>   * repourl_poky : git://git.yoctoproject.org/poky
>   * revision : e624d737b7117f00b81b389ab81570d1737cc339
>   * scheduler : trigger_nightly-qa-systemd
>   * slavename : ab04
>   * workdir :
>     /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd
>
> /Detailed log of last build step:/
> http://autobuilder.yoctoproject.org:8011/builders/nightly-qa-systemd/builds/171/steps/Running
> Sanity Tests_2/logs/stdio
>
>
>         Last 60 lines of "Running Sanity Tests_2.stdio" Error log:
>
> ERROR: Function failed: Failed to start qemu. You should check the task
> log and the qemu boot log (qemu log is
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd/build/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r0/testimage/qemu_boot_log.20130917224812)
> ERROR: Logfile of failure stored in:
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd/build/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r0/temp/log.do_testimage.29091
> | DEBUG: Executing python function do_testimage
> | NOTE: Created listening socket for qemu serial console on: 127.0.0.1:38278
> | NOTE: DISPLAY value: :1
> | NOTE: rootfs file:
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd/build/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r0/testimage/core-image-sato-qemux86-64-testimage.ext3
> | NOTE: Qemu log file:
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd/build/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r0/testimage/qemu_boot_log.20130917224812
> | NOTE: SSH log file:
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd/build/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r0/testimage/ssh_target_log.20130917224812
> | NOTE: runqemu started, pid is 29097
> | NOTE: waiting at most 60 seconds for qemu pid
> | NOTE: qemu started - qemu procces pid is 29151
> | NOTE: IP found: 192.168.7.4
> | NOTE: Waiting at most 1500 seconds for login banner
> | NOTE: Connection from 127.0.0.1:51487
> | NOTE: Target didn't reached login boot in 1500 seconds
> | NOTE: Last 5 lines of text:
> | netconsole: network logging started
> | rtc_cmos 00:00: setting system clock to 2013-09-17 22:48:43 UTC
> (1379458123)
> | IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> | usb 1-1: new full-speed USB device number 2 using uhci_hcd
> | input: Wacom Penpartner as
> /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
> | NOTE: Check full boot log:
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd/build/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r0/testimage/qemu_boot_log.20130917224812
> | NOTE: Sending SIGTERM to runqemu
> | NOTE: Sending SIGKILL to runqemu
> | DEBUG: Python function do_testimage finished
> | ERROR: Function failed: Failed to start qemu. You should check the
> task log and the qemu boot log (qemu log is
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd/build/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r0/testimage/qemu_boot_log.20130917224812)
> ERROR: Task 0
> (/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-qa-systemd/build/meta/recipes-sato/images/core-image-sato.bb,
> do_testimage) failed with exit code '1'
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>
>
>
> *-The Yocto BuildBot*
>
>
> _______________________________________________
> Yocto-builds mailing list
> Yocto-builds at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto-builds
>