[Yocto-builds] buildbot failure in The Yocto Autobuilder on nightly-mips

[Paul Eggleton]

On Wednesday 11 September 2013 02:30:03 yocto-builds at yoctoproject.org wrote:
> Build status: FAILURE
> 
> Buildslave for this Build: ab04
> Complete logs for all build steps:
> http://autobuilder.yoctoproject.org:8011/builders/nightly-mips/builds/287
> Build Reason: Triggerable(trigger_nightly-mips)
> Build Properties:
> Contents of bblayers.conf (Note. LCONF_VERSION will not show up correctly)
> LCONF_VERSION =
> BBPATH = "${TOPDIR}"
> BBFILES ?=""
> BBLAYERS += " \
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/met
> a \
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/me
> ta-yocto \
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/me
> ta-yocto-bsp \
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/me
> ta-qt3 \ "
> 
> DEST : /srv/www/vhosts/autobuilder.yoctoproject.org/pub/nightly/20130910-1
> Contents of auto.conf (local.conf for autobuilders)
> DISTRO = "poky"
> PACKAGE_CLASSES = "package_rpm package_deb package_ipk"
> BB_NUMBER_THREADS = "16"
> PARALLEL_MAKE = "-j 16"
> SDKMACHINE ?= "x86-64"
> DL_DIR = "/srv/www/vhosts/autobuilder.yoctoproject.org/current_sources"
> SSTATE_DIR ?= "/srv/www/vhosts/sstate.yoctoproject.org//"
> MACHINE = "qemumips"
> PREMIRRORS = ""
> BB_GENERATE_MIRROR_TARBALLS = "1"
> ADTREPO = "http://adtrepo.yoctoproject.org//1.4+snapshot"
> 
> MACHINE : qemumips
> branch : master
> branch_meta-qt3 : master
> branch_poky : master
> buildername : nightly-mips
> buildnumber : 287
> commit-description : 1.5_M4.rc3
> commit_meta-qt3 : HEAD
> commit_poky : HEAD
> distroversion : 1.4+snapshot
> got_revision : 6b4f7e4b26c51f0c1517c0a697031e7bc488b76f
> got_revision_meta-qt3 : b73552fb998fd30a01dbee5a172e432a16078222
> got_revision_poky : 6b4f7e4b26c51f0c1517c0a697031e7bc488b76f
> layerversion_core : 2
> layerversion_yoctobsp : 2
> repository : git://git.yoctoproject.org/poky
> repourl_meta-qt3 : git://git.yoctoproject.org/meta-qt3
> repourl_poky : git://git.yoctoproject.org/poky
> revision : HEAD
> scheduler : trigger_nightly-mips
> slavename : ab04
> workdir : /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips
> Detailed log of last build step:
> http://autobuilder.yoctoproject.org:8011/builders/nightly-mips/builds/287/s
> teps/Running Sanity Tests/logs/stdio Last 60 lines of "Running Sanity
> Tests.stdio" Error log:
> 
> ERROR: Function failed: Failed to start qemu. You should check the task log
> and the qemu boot log (qemu log is
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/bu
> ild/tmp/work/qemumips-poky-linux/core-image-sato-sdk/1.0-r0/testimage/qemu_b
> oot_log.20130911004325) ERROR: Logfile of failure stored in:
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/bu
> ild/tmp/work/qemumips-poky-linux/core-image-sato-sdk/1.0-r0/temp/log.do_test
> image.26311
> | DEBUG: Executing python function do_testimage
> | NOTE: Created listening socket for qemu serial console on: 127.0.0.1:42863
> | NOTE: DISPLAY value: :1
> | NOTE: rootfs file:
> | /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/
> | build/tmp/work/qemumips-poky-linux/core-image-sato-sdk/1.0-r0/testimage/co
> | re-image-sato-sdk-qemumips-testimage.ext3 NOTE: Qemu log file:
> | /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/
> | build/tmp/work/qemumips-poky-linux/core-image-sato-sdk/1.0-r0/testimage/qe
> | mu_boot_log.20130911004325 NOTE: SSH log file:
> | /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/
> | build/tmp/work/qemumips-poky-linux/core-image-sato-sdk/1.0-r0/testimage/ss
> | h_target_log.20130911004325 NOTE: runqemu started, pid is 26607
> | NOTE: waiting at most 60 seconds for qemu pid
> | NOTE: qemu started - qemu procces pid is 26672
> | NOTE: IP found: 192.168.7.6
> | NOTE: Waiting at most 1500 seconds for login banner
> | NOTE: Connection from 127.0.0.1:46149
> | NOTE: Target didn't reached login boot in 1500 seconds
> | NOTE: Last 5 lines of text:
> | device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=192.168.7.6,
> | mask=255.255.255.0, gw=192.168.7.5 host=192.168.7.6, domain=,
> | nis-domain=(none)
> | usb 1-1: new full-speed USB device number 2 using uhci_hcd
> | bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
> | input: Wacom Penpartner as
> | /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/input/input1 NOTE:
> | Check full boot log:
> | /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/
> | build/tmp/work/qemumips-poky-linux/core-image-sato-sdk/1.0-r0/testimage/qe
> | mu_boot_log.20130911004325 NOTE: Sending SIGTERM to runqemu
> | NOTE: Sending SIGKILL to runqemu
> | DEBUG: Python function do_testimage finished
> | ERROR: Function failed: Failed to start qemu. You should check the task
> | log and the qemu boot log (qemu log is
> | /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/
> | build/tmp/work/qemumips-poky-linux/core-image-sato-sdk/1.0-r0/testimage/qe
> | mu_boot_log.20130911004325)
> ERROR: Task 2
> (/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/m
> eta/recipes-sato/images/core-image-sato-sdk.bb, do_testimage) failed with
> exit code '1' Summary: There was 1 ERROR message shown, returning a
> non-zero exit code.

This is bug 5131 being worked on by Stefan:

https://bugzilla.yoctoproject.org/show_bug.cgi?id=5131

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre