[Yocto-builds] buildbot failure in The Yocto Autobuilder on nightly-x32

Thu Jun 13 15:03:11 PDT 2013

Looks like the newer version of Qemu 1.5,0 is not happy with x32!
When I revert this change and use qemu 1.4.1 x32 boots fine with the 
same build.

I built it locally and booted the image and got the following kernel 
panic, so I think there is something more going on, I have not dug into 
this yet, just reporting a follow-up.

This is why we like to get full testing across all arches of qemu 
updates even when the upsteam changes are no that major!

Sau!

EXT3-fs (hda): warning: feature flags set on rev 0 fs, running e2fsck is 
recommended
EXT3-fs (hda): warning: updating to rev 1 because of new feature flag, 
running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3-fs (hda): using internal journal
EXT3-fs (hda): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) on device 3:0.
devtmpfs: mounted
Freeing unused kernel memory: 732k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1340k freed
Freeing unused kernel memory: 1520k freed
init[1]: segfault at ffff ip 00000000f7535562 sp 00000000ff9a4740 error 
4 in ld-2.17.so[f7531000+20000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Pid: 1, comm: init Not tainted 3.8.13-yocto-standard #1
Call Trace:
  [<ffffffff8169a51d>] panic+0xbb/0x1b3
  [<ffffffff8104139a>] do_exit+0x91a/0x9f0
  [<ffffffff810414ff>] do_group_exit+0x3f/0xa0
  [<ffffffff8105074d>] get_signal_to_deliver+0x23d/0x660
  [<ffffffff8169a45a>] ? bad_area+0x45/0x4d
  [<ffffffff81001b3f>] do_signal+0x3f/0x8c0
  [<ffffffff8169a676>] ? printk+0x61/0x63
  [<ffffffff816a28b6>] ? preempt_schedule_irq+0x46/0x60
  [<ffffffff8100243f>] do_notify_resume+0x7f/0x90
  [<ffffffff816a3ef9>] retint_signal+0x3d/0x74
general protection fault: fff2 [#1] PREEMPT SMP
Modules linked in:
CPU 0
Pid: 1, comm: init Not tainted 3.8.13-yocto-standard #1 Bochs Bochs
RIP: 0010:[<ffffffff8169a5dc>]  [<ffffffff8169a5dc>] panic+0x17a/0x1b3
RSP: 0000:ffff88000791dc58  EFLAGS: 00000242
RAX: 0000000060000002 RBX: ffffffff819c2a20 RCX: 0000000000000001
RDX: 00000000000000ea RSI: 0000000000000000 RDI: 0000000000000001
RBP: ffff88000791dcc8 R08: 0000000000000000 R09: 000000000000017b
R10: 6572205d3e396665 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff880007920000
FS:  0000000000000000(0000) GS:ffff880007c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
CR2: 000000000000ffff CR3: 0000000001c0c000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
Process init (pid: 1, threadinfo ffff88000791c000, task ffff880007920000)
Stack:
  0000000000000003 0000000000000010 ffff88000791dcd8 ffff88000791dc78
  ffffffff81de6e40 000000000000000b ffff880007920000 0000000000000000
  0000000000001c27 0000000000000001 ffff880007ab4340 ffff880007ab43a8
Call Trace:
  [<ffffffff8104139a>] do_exit+0x91a/0x9f0
  [<ffffffff810414ff>] do_group_exit+0x3f/0xa0
  [<ffffffff8105074d>] get_signal_to_deliver+0x23d/0x660
  [<ffffffff8169a45a>] ? bad_area+0x45/0x4d
  [<ffffffff81001b3f>] do_signal+0x3f/0x8c0
  [<ffffffff8169a676>] ? printk+0x61/0x63
  [<ffffffff816a28b6>] ? preempt_schedule_irq+0x46/0x60
  [<ffffffff8100243f>] do_notify_resume+0x7f/0x90
  [<ffffffff816a3ef9>] retint_signal+0x3d/0x74
Code: ff cc 75 f1 48 83 c3 64 69 05 3d 39 70 00 e8 03 00 00 48 98 48 39 
d8 7f b8 83 3d 2f 39 70 00 00 74 05 e8 58 7f 9b ff fb 45 31 e4 <4d> 39 
ec 7c 18 41 83 f6 01 44 89 f7 ff 15 f2 38 70 00 49 01 c4
RIP  [<ffffffff8169a5dc>] panic+0x17a/0x1b3
  RSP <ffff88000791dc58>
---[ end trace a6eaf91379dbb4e1 ]---
Fixing recursive fault but reboot is needed!
BUG: scheduling while atomic: init/1/0x00000002
Modules linked in:
Pid: 1, comm: init Tainted: G      D      3.8.13-yocto-standard #1
Call Trace:
  [<ffffffff8169abdf>] __schedule_bug+0x48/0x54
  [<ffffffff816a2349>] __schedule+0x8a9/0xa50
  [<ffffffff816a36db>] ? _raw_spin_lock+0x1b/0x40
  [<ffffffff8169a676>] ? printk+0x61/0x63
  [<ffffffff816a2609>] schedule+0x29/0x70
  [<ffffffff81041372>] do_exit+0x8f2/0x9f0
  [<ffffffff8169a676>] ? printk+0x61/0x63
  [<ffffffff8103ec81>] ? kmsg_dump+0xc1/0xd0
  [<ffffffff816a4b3f>] oops_end+0x6f/0xa0
  [<ffffffff81005538>] die+0x58/0x90
  [<ffffffff816a4632>] do_general_protection+0xd2/0x160
  [<ffffffff816a4032>] general_protection+0x22/0x30
  [<ffffffff8169a5dc>] ? panic+0x17a/0x1b3
  [<ffffffff8169a54b>] ? panic+0xe9/0x1b3
  [<ffffffff8104139a>] do_exit+0x91a/0x9f0
  [<ffffffff810414ff>] do_group_exit+0x3f/0xa0
  [<ffffffff8105074d>] get_signal_to_deliver+0x23d/0x660
  [<ffffffff8169a45a>] ? bad_area+0x45/0x4d
  [<ffffffff81001b3f>] do_signal+0x3f/0x8c0
  [<ffffffff8169a676>] ? printk+0x61/0x63
  [<ffffffff816a28b6>] ? preempt_schedule_irq+0x46/0x60
  [<ffffffff8100243f>] do_notify_resume+0x7f/0x90
  [<ffffffff816a3ef9>] retint_signal+0x3d/0x74

On 06/13/2013 11:15 AM, yocto-builds at yoctoproject.org wrote:
>
>         Build status: FAILURE
>
> Buildslave for this Build: *ab04*
> Complete logs for all build steps:
> http://autobuilder.yoctoproject.org:8011/builders/nightly-x32/builds/181
> Build Reason: Triggerable(trigger_nightly-x32)
> Build Properties: *Properties(**{u'repo_trigger_poky_nightly-x32':
> u'git://git.yoctoproject.org/poky',
> u'branch_trigger_meta-fsl-ppc_nightly-x32': None, 'repourl_poky':
> u'git://git.yoctoproject.org/poky', 'got_revision':
> '04af378874f38d1200bea2fa191beeae94232d6e',
> u'repo_trigger_oecore_nightly-x32': None,
> u'commit_trigger_meta-fsl-ppc_nightly-x32': None, 'branch_meta-qt3':
> u'master', u'commit_trigger_meta-minnow_nightly-x32': None,
> u'branch_trigger_eclipse-poky_nightly-x32': None, 'got_revision_poky':
> '04af378874f38d1200bea2fa191beeae94232d6e', 'commit_meta-qt3': u'HEAD',
> u'repo_trigger_bitbake_nightly-x32': None,
> u'repo_trigger_meta-minnow_nightly-x32': None,
> u'bb_trigger_meta-intel_nightly-x32': None, 'buildnumber': 181,
> u'bb_trigger_meta-fsl-arm_nightly-x32': None,
> u'bb_trigger_meta-fsl-ppc_nightly-x32': None,
> u'bb_trigger_meta-minnow_nightly-x32': None,
> u'bb_trigger_eclipse-poky_nightly-x32': None, 'commit-description':
> 'dylan-9.0.1.rc1', u'repo_trigger_meta-intel_nightly-x32': None,
> 'slavename': 'ab04', u'commit_trigger_meta-intel_nightly-x32': None,
> u'bb_trigger_poky_nightly-x32': u'1', 'branch': u'',
> u'branch_trigger_meta-minnow_nightly-x32': None, 'distroversion':
> '1.4+snapshot', u'branch_trigger_meta-fsl-arm_nightly-x32': None,
> u'branch_trigger_poky_nightly-x32': u'master', 'revision':
> u'04af378874f38d1200bea2fa191beeae94232d6e', 'workdir':
> '/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32',
> 'commit_poky': u'HEAD', 'repository': '', 'buildername': 'nightly-x32',
> u'DEST':
> u'/srv/www/vhosts/autobuilder.yoctoproject.org/pub/nightly/20130613-2',
> u'repo_trigger_meta-fsl-arm_nightly-x32': None,
> u'repo_trigger_meta-fsl-ppc_nightly-x32': None, 'got_revision_meta-qt3':
> '4c27cce6688aa39852f3cba5e7b80ec279019605', u'scheduler':
> u'trigger_nightly-x32', u'branch_trigger_meta-intel_nightly-x32': None,
> u'commit_trigger_poky_nightly-x32': u'HEAD',
> u'commit_trigger_meta-fsl-arm_nightly-x32': None,
> u'bb_trigger_bitbake_nightly-x32': None,
> u'repo_trigger_meta-qt3_nightly-x32':
> u'git://git.yoctoproject.org/meta-qt3', 'branch_poky': u'master',
> u'repo_trigger_eclipse-poky_nightly-x32': None,
> u'commit_trigger_oecore_nightly-x32': None, 'codebase': '',
> u'commit_trigger_bitbake_nightly-x32': None,
> u'bb_trigger_meta-qt3_nightly-x32': u'2', 'project': '',
> u'commit_trigger_meta-qt3_nightly-x32': u'HEAD',
> u'bb_trigger_oecore_nightly-x32': None,
> u'branch_trigger_oecore_nightly-x32': None,
> u'branch_trigger_bitbake_nightly-x32': None,
> u'branch_trigger_meta-qt3_nightly-x32': u'master', 'repourl_meta-qt3':
> u'git://git.yoctoproject.org/meta-qt3',
> u'commit_trigger_eclipse-poky_nightly-x32': None})*
> /Detailed log of last build step:/
> http://autobuilder.yoctoproject.org:8011/builders/nightly-x32/builds/181/steps/Running
> Sanity Tests/logs/stdio
>
>
>         Last 20 lines of "Running Sanity Tests.stdio" Error log:
>
> | Running qemu-system-x86_64...
> |
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-x86_64
> -kernel
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/deploy/images/bzImage-qemux86-64.bin
> -net nic,vlan=0 -net tap,vlan=0,ifname=tap1,script=no,downscript=no -hda
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-sato/1.0-r0/qemuimagetest/tmp/core-image-sato-qemux86-64-test.ext3
> -show-cursor -usb -usbdevice wacom-tablet -vga vmware -no-reboot -m 128
> --append "vga=0 uvesafb.mode_option=640x480-32 root=/dev/hda rw mem=128M
> ip=192.168.7.4::192.168.7.3:255.255.255.0 oprofile.timer=1 "
> | Test_Info: Qemu or its network is not up in 50 seconds
> | Saving 11430 192.168.7.4 to
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-sato/1.0-r0/qemuimagetest/tmp/target_ip
> | Test_Info: Shutdown Test FAIL
> | killing 11578
> | NOTE: Test Result for qemux86-64 core-image-sato ext3
> | NOTE: Testcase PASS FAIL NORESULT
> | NOTE: SSH 0 1 0
> | NOTE: SCP 0 1 0
> | NOTE: smart_help 0 1 0
> | NOTE: smart_query 0 1 0
> | NOTE: rpm_query 0 1 0
> | NOTE: connman 0 1 0
> | NOTE: dmesg 0 1 0
> | NOTE: shutdown 0 1 0
> | DEBUG: Python function do_qemuimagetest_standalone finished
> | ERROR: Function failed: Some tests failed. Please check the results
> file:
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/work/qemux86_64-poky-linux-gnux32/core-image-sato/1.0-r0/qemuimagetest/result/testresult.20130613175519
> and the log files found in:
> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/build/tmp/log/qemuimagetests.
> ERROR: Task 1
> (/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-x32/build/meta/recipes-sato/images/core-image-sato.bb,
> do_qemuimagetest_standalone) failed with exit code '1'
> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
>
>
>
> *-The Yocto BuildBot*
>
>
> _______________________________________________
> Yocto-builds mailing list
> Yocto-builds at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto-builds
>