[Yocto-bsp] [PATCH] yocto-bsp: Add a new BSP to support edgerouter

[Bruce Ashfield]

On 14-03-18 01:19 AM, Wei.Yang at windriver.com wrote:
> From: Yang Wei <Wei.Yang at windriver.com>
>
> Signed-off-by: Yang Wei <Wei.Yang at windriver.com>
> ---
>
> This BSP would be released in Yocto 1.6, so here I temporarily enabled linux-yocto-dev
> recipe via PREFERRED_PROVIDER_virtual/kernel. During the my validation, I also added
> linux-yocto-dev.bbappend to define some variables such KBRANCH, but since we would
> add a new kernel version's bbappend while releasing Yocto 1.6, so I do not add the bbappend
> in this patch.

This looks fine. I've staged it locally, and will test it against the
-dev kernel. When I name the 3.14 kernel, I'll make sure it is in the
bbappend.

Bruce

>
> Thanks
> Wei
>   meta-yocto-bsp/conf/machine/edgerouter.conf |   21 +++++++++++++++++++++
>   1 file changed, 21 insertions(+)
>   create mode 100644 meta-yocto-bsp/conf/machine/edgerouter.conf
>
> diff --git a/meta-yocto-bsp/conf/machine/edgerouter.conf b/meta-yocto-bsp/conf/machine/edgerouter.conf
> new file mode 100644
> index 0000000..f3ea33b
> --- /dev/null
> +++ b/meta-yocto-bsp/conf/machine/edgerouter.conf
> @@ -0,0 +1,21 @@
> +#@TYPE: Machine
> +#@NAME: Edgerouter
> +#@DESCRIPTION: Edgerouter
> +
> +require conf/machine/include/tune-mips64.inc
> +
> +MACHINE_FEATURES = "pci ext2 ext3 serial"
> +
> +KERNEL_IMAGETYPE = "vmlinux"
> +KERNEL_ALT_IMAGETYPE = "vmlinux.bin"
> +KERNEL_IMAGE_STRIP_EXTRA_SECTIONS  = ".comment"
> +
> +PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto-dev"
> +
> +SERIAL_CONSOLE = "115200 ttyS0"
> +USE_VT ?= "0"
> +
> +MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
> +
> +IMAGE_FSTYPES ?= "jffs2 tar.bz2"
> +JFFS2_ERASEBLOCK = "0x10000"
>