May 2011 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun May 1 22:46:31 PDT 2011
Ending: Tue May 31 23:48:40 PDT 2011
Messages: 778

• [poky] Problem with local build (using Poky Bernard 5.0)   Pasi.Reponen at elektrobit.com
• [poky] GCC 4.6.0 on ARM?   Gary Thomas
• [poky] GCC 4.6.0 on ARM?   Gary Thomas
• [poky] Error in Pulling cyrus-sasl   chinmaya hoshing
• [poky] post-image-creation postinsts   Colin Walters
• [poky] post-image-creation postinsts   Mark Hatle
• [poky] [PATCH 0/1] meta-intel: use default rootfs size   Tom Zanussi
• [poky] [PATCH 1/1] meta-intel: use default rootfs size for BSPS   Tom Zanussi
• [poky] RFC: Recipe based User & Group addition, modification and deletion   Mark Hatle
• [poky] [PATCH 1/1] meta-intel: use default rootfs size for BSPS   Darren Hart
• [poky] GCC 4.6.0 on ARM?   Khem Raj
• [poky] [OE-core] RFC: design of network based PR service   Khem Raj
• [poky] GCC 4.6.0 on ARM?   Khem Raj
• [poky] bitbake gs failed   Kang Kai
• [poky] [PATCH 0/1] [Resend] qemuimagetest: Enable toolchain automation tests in qemuimagetest   Jiajun Xu
• [poky] [PATCH 1/1] qemuimagetest: Enable toolchain automation tests in qemuimagetest   Jiajun Xu
• [poky] [PATCH 0/2] Add foomatic-filters and ghostscript   Kang Kai
• [poky] [PATCH 1/2] foomatic-filters: added to pass LSB commands check   Kang Kai
• [poky] [PATCH 2/2] ghostscript: added to pass LSB commands check   Kang Kai
• [poky] post-image-creation postinsts   Richard Purdie
• [poky] Can't share build trees?   Gary Thomas
• [poky] Can't share build trees?   Richard Purdie
• [poky] Can't share build trees?   Gary Thomas
• [poky] Can't share build trees?   Gary Thomas
• [poky] Incorrect startup warning on ARM targets   Gary Thomas
• [poky] post-image-creation postinsts   Colin Walters
• [poky] Zypper question   Gary Thomas
• [poky] Incorrect startup warning on ARM targets   Khem Raj
• [poky] post-image-creation postinsts   Richard Purdie
• [poky] gstreamer not playing nice with gconf?   Gary Thomas
• [poky] Incorrect startup warning on ARM targets   Gary Thomas
• [poky] post-image-creation postinsts   Joshua Lock
• [poky] Zypper question   Mark Hatle
• [poky] post-image-creation postinsts   Mark Hatle
• [poky] [PATCH 0/1] qemuimagetest: Add executable permission to toolchain test scripts   Jiajun Xu
• [poky] [PATCH 1/1] qemuimagetest: Add executable permission to test scripts for toolchain   Jiajun Xu
• [poky] [PATCH 2/2] ghostscript: added to pass LSB commands check   Saul Wold
• [poky] Zypper question   Gary Thomas
• [poky] Error in pulling nspr package   chinmaya hoshing
• [poky] Zypper question   Mark Hatle
• [poky] Error in pulling nspr package   Mark Hatle
• [poky] Error in pulling nspr package   chinmaya hoshing
• [poky] [PATCH 0/1] qemuimagetest: Add executable permission to toolchain test scripts   Richard Purdie
• [poky] [PATCH 0/2] Add foomatic-filters and ghostscript V2   Kang Kai
• [poky] [PATCH 1/2] foomatic-filters: added to pass LSB commands check   Kang Kai
• [poky] [PATCH 2/2] ghostscript: added to pass LSB commands check   Kang Kai
• [poky] [PATCH 0/1] qt4: Fix [# 1020]   Xiaofeng Yan
• [poky] [PATCH 1/1] qt4: Enable qt4 opengl for ppc   Xiaofeng Yan
• [poky] Zypper question   Gary Thomas
• [poky] gstreamer not playing nice with gconf?   Richard Purdie
• [poky] gstreamer not playing nice with gconf?   Koen Kooi
• [poky] gstreamer not playing nice with gconf?   Gary Thomas
• [poky] [PATCH 0/3] Remove machine/distro-specific metadata v3 + add some back to meta-yocto   Paul Eggleton
• [poky] [PATCH 1/3] Remove machine-specific metadata for machines no longer in oe-core   Paul Eggleton
• [poky] [PATCH 2/3] Remove distro-specific metadata for distros not in oe-core   Paul Eggleton
• [poky] [PATCH 3/3] meta-yocto: add pieces removed from oe-core for beagleboard & atom-pc   Paul Eggleton
• [poky] [OE-core] [PATCH 1/3] Remove machine-specific metadata for machines no longer in oe-core   Gary Thomas
• [poky] Zypper question   Mark Hatle
• [poky] Zypper question   Gary Thomas
• [poky] [OE-core] [PATCH 1/3] Remove machine-specific metadata for machines no longer in oe-core   Paul Eggleton
• [poky] Debugging overrides   Gary Thomas
• [poky] [OE-core] [PATCH 1/3] Remove machine-specific metadata for machines no longer in oe-core   Gary Thomas
• [poky] opkg and opkg-target aliases for the SDK   Ilya Yanok
• [poky] opkg and opkg-target aliases for the SDK   Zhang, Jessica
• [poky] [PATCH 1/1] qt4: Enable qt4 opengl for ppc   Tom Rini
• [poky] [PATCH 1/1] qt4: Enable qt4 opengl for ppc   Saul Wold
• [poky] [PATCH 0/3] linux-yocto: consolidated pull request   Bruce Ashfield
• [poky] [PATCH 1/3] linux-yocto: apply meta data to external repos   Bruce Ashfield
• [poky] [PATCH 2/3] linux-yocto: safely process unbranched repositories   Bruce Ashfield
• [poky] [PATCH 3/3] linux-yocto: update SRCREVs   Bruce Ashfield
• [poky] [PATCH 0/1] boot-directdisk fixes for master   Tom Zanussi
• [poky] [PATCH 1/1] boot-directdisk: fix bzImage source location   Tom Zanussi
• [poky] [PATCH 0/2] boot-directdisk fixes for bernard   Tom Zanussi
• [poky] [PATCH 1/2] core-image-directdisk: add LIC_FILES_CHECKSUM   Tom Zanussi
• [poky] [PATCH 2/2] boot-directdisk: fix bzImage source location   Tom Zanussi
• [poky] Error in pulling cups package   chinmaya hoshing
• [poky] [OE-core] [PATCH 3/3] meta-yocto: add pieces removed from oe-core for beagleboard & atom-pc   Richard Purdie
• [poky] [OE-core] [PATCH 1/3] Remove machine-specific metadata for machines no longer in oe-core   Richard Purdie
• [poky] [OE-core] [PATCH 3/3] meta-yocto: add pieces removed from oe-core for beagleboard & atom-pc   Koen Kooi
• [poky] [OE-core] [PATCH 3/3] meta-yocto: add pieces removed from oe-core for beagleboard & atom-pc   Richard Purdie
• [poky] [OE-core] [PATCH 3/3] meta-yocto: add pieces removed from oe-core for beagleboard & atom-pc   Koen Kooi
• [poky] [OE-core] [PATCH 3/3] meta-yocto: add pieces removed from oe-core for beagleboard & atom-pc   Richard Purdie
• [poky] Error in pulling cups package   Tom Zanussi
• [poky] Error in pulling cups package   Gary Thomas
• [poky] Error in pulling cups package   Mark Hatle
• [poky] Debugging overrides   Gary Thomas
• [poky] Debugging overrides   Chris Larson
• [poky] Debugging overrides   Gary Thomas
• [poky] building images   C Michael Sundius
• [poky] [PATCH 0/7] Microblaze target arch support   Adrian Alonso
• [poky] [PATCH 1/7] insane: add micrblaze target info   Adrian Alonso
• [poky] [PATCH 2/7] kernel-arch: add microblaze to valid archs   Adrian Alonso
• [poky] [PATCH 3/7] siteinfo: add microblaze target info   Adrian Alonso
• [poky] [PATCH 4/7] linux-libc-headers: add microblaze ARCH definition   Adrian Alonso
• [poky] [PATCH 5/7] image-mklibs: add microblaze arch support   Adrian Alonso
• [poky] [PATCH 6/7] package_rpm: use target vendor information   Adrian Alonso
• [poky] [PATCH 7/7] readline: update version   Adrian Alonso
• [poky] opkg and opkg-target aliases for the SDK   Ilya Yanok
• [poky] opkg and opkg-target aliases for the SDK   Lu, Lianhao
• [poky] poky and poky-target aliases for the SDK   Zhang, Jessica
• [poky] [PATCH 01/10] gcc-4.6.0: Apply linaro patches   Nitin A Kamble
• [poky] [PATCH 00/10] gcc-4.6.0 related fixes & patch upstream status updates   Nitin A Kamble
• [poky] [PATCH 03/10] patch-2.6.1: update patch upstream status   Nitin A Kamble
• [poky] [PATCH 06/10] subversion: update upstream status for patches   Nitin A Kamble
• [poky] [PATCH 05/10] python-imaging: update upstream status for patches   Nitin A Kamble
• [poky] [PATCH 02/10] libpcre: update upstream status for patches   Nitin A Kamble
• [poky] [PATCH 04/10] patch: update upstream status for patches   Nitin A Kamble
• [poky] [PATCH 10/10] binutils: update upstream status of patches   Nitin A Kamble
• [poky] [PATCH 09/10] gcc-4.5.1: update upstream status of patches   Nitin A Kamble
• [poky] [PATCH 08/10] sat-solver: fix compilation issue with gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 07/10] linux-yocto_git.bb: Backport upstream fix for gcc 4.6 compilation   Nitin A Kamble
• [poky] [OE-core] [PATCH 07/10] linux-yocto_git.bb: Backport upstream fix for gcc 4.6 compilation   Bruce Ashfield
• [poky] [PATCH 0/2] Add gettext-runtime and libxml-sax-perl   Kang Kai
• [poky] [PATCH 1/2] libxml-sax-perl: added for resolve LSB olver test   Kang Kai
• [poky] [PATCH 2/2] task-core-lsb: add gettext-runtime and libxml-sax-perl   Kang Kai
• [poky] Error in pulling cups package   chinmaya hoshing
• [poky] Third party toolchain, kernel, bootloader   Robert Berger
• [poky] Error in pulling cups package   chinmaya hoshing
• [poky] Error in pulling cups package   Gary Thomas
• [poky] Error in pulling cups package   Kang Kai
• [poky] Error in pulling cups package   Gary Thomas
• [poky] Error in pulling cups package   Mark Hatle
• [poky] Third party toolchain, kernel, bootloader   Darren Hart
• [poky] [PATCH 6/7] package_rpm: use target vendor information   Darren Hart
• [poky] [PATCH 6/7] package_rpm: use target vendor information   Adrian Alonso
• [poky] [PATCH 6/7] package_rpm: use target vendor information   Mark Hatle
• [poky] [PATCH] u-boot: correct COPYING MD5SUM   Darren Hart
• [poky] [PATCH 6/7] package_rpm: use target vendor information   Darren Hart
• [poky] RFC: mkzipimage.sh script   Darren Hart
• [poky] [PATCH] atom-pc: use linux-yocto (2.6.37) kernel   Darren Hart
• [poky] RFC: mkzipimage.sh script   Joshua Lock
• [poky] [PATCH 0/2][RESEND] bug fix for quilt and sat-solver   Saul Wold
• [poky] [PATCH 0/3] logging updates   Saul Wold
• [poky] [PATCH 0/2] GPLv2 tar & cpio recipe fixes   Saul Wold
• [poky] [PATCH 0/2] cdrtools recipe cleanup   Saul Wold
• [poky] [PATCH 0/1] directdisk image build fix   Saul Wold
• [poky] bitbake error in master ?   Bruce Ashfield
• [poky] bitbake error in master ?   Tom Zanussi
• [poky] bitbake error in master ?   Bruce Ashfield
• [poky] Error in pulling cups package   Kang Kai
• [poky] bitbake error in master ?   Richard Purdie
• [poky] Third party toolchain, kernel, bootloader   Robert Berger
• [poky] Third party toolchain, kernel, bootloader   Xianghua Xiao
• [poky] [PATCH] Fix matchbox-panel-2 compile error   Khem Raj
• [poky] [PATCH 1/7] insane: add micrblaze target info   Khem Raj
• [poky] Third party toolchain, kernel, bootloader   Robert Berger
• [poky] help adding perl module   Marc
• [poky] [PATCH 0/4] Put extra requested fields into different cache files   Liping Ke
• [poky] [PATCH 1/4][Image Creator]Put extra requested fields into different cache files   Liping Ke
• [poky] [PATCH 2/4][Image Creator]Put extra requested fields into different cache files   Liping Ke
• [poky] [PATCH 3/4][Image Creator]Put extra requested fields into different cache files   Liping Ke
• [poky] [PATCH 4/4][Image Creator]Put extra requested fields into different cache files   Liping Ke
• [poky] Error in Pulling cyrus-sasl   chinmaya hoshing
• [poky] [PATCH 0/4] Put extra requested fields into different cache files   Liping Ke
• [poky] [PATCH 1/4][Image Creator]Put extra requested fields into different cache files   Liping Ke
• [poky] [PATCH 2/4][Image Creator]Put extra requested fields into different cache files   Liping Ke
• [poky] [PATCH 3/4][Image Creator]Put extra requested fields into different cache files   Liping Ke
• [poky] [PATCH 4/4][Image Creator]Put extra requested fields into different cache files   Liping Ke
• [poky] [PATCH 0/4][Image Creator]Put extra requested fields into different cache files   Ke, Liping
• [poky] [PATCH 0/4][Image Creator]Put extra requested fields into different cache files   Ke, Liping
• [poky] help adding perl module   Kang Kai
• [poky] Error in pulling cups package   chinmaya hoshing
• [poky] [PATCH 0/4][Image Creator]Put extra requested fields into different cache files   Richard Purdie
• [poky] [PATCH 1/7] insane: add micrblaze target info   Adrian Alonso
• [poky] [OE-core] [PATCH 00/10] gcc-4.6.0 related fixes & patch upstream status updates   Saul Wold
• [poky] [PATCH] u-boot: correct COPYING MD5SUM   Saul Wold
• [poky] [PATCH 0/1] gnome-doc-utils xsltproc fix   Scott Garman
• [poky] [PATCH 1/1] gnome-doc-utils: Add additional missing -nonet options to xsltproc   Scott Garman
• [poky] Third party toolchain, kernel, bootloader   Robert Berger
• [poky] Third party toolchain, kernel, bootloader   Koen Kooi
• [poky] Poky display on beagleboard xm   mark hubrich
• [poky] Poky display on beagleboard xm   Darren Hart
• [poky] [PATCH 0/3] linux-yocto: consolidated pull request   Bruce Ashfield
• [poky] [PATCH 1/3] linux-yocto: remove non-core (qemu) machine compatibility   Bruce Ashfield
• [poky] [PATCH 2/3] linux-yocto: move non-core machines to meta-yocto   Bruce Ashfield
• [poky] [PATCH 3/3] linux-yocto: error if meta data not present   Bruce Ashfield
• [poky] Third party toolchain, kernel, bootloader   Robert Berger
• [poky] [PATCH] toolchain-qte: include cross-compiler and fix env script   Ilya Yanok
• [poky] Third party toolchain, kernel, bootloader   Darren Hart
• [poky] [PATCH 1/5] gcc-4.6.0: Apply linaro patches   Nitin A Kamble
• [poky] [PATCH 2/5] mdadm: compilation fix for gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 0/5] Misc fixes related to gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 5/5] kexec-tools: fix compiler errors with gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 4/5] systemtap: fix for compilation with gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 3/5] pax: fix for compiling with gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 1/1] qt4: Enable qt4 opengl for ppc   Saul Wold
• [poky] [PATCH 0/4][Image Creator]Put extra requested fields into different cache files   Ke, Liping
• [poky] [OE-core] [PATCH 0/5] Misc fixes related to gcc 4.6.0   Saul Wold
• [poky] [PATCH 0/1] POKY - Master Pull Request   Saul Wold
• [poky] [PATCH 1/1] linux-yocto: move non-core machines to meta-yocto   Saul Wold
• [poky] [PATCH 00/39][PULL] Upstream Status Update   Dongxiao Xu
• [poky] [PATCH 01/39] hostap: add upstream status for hostap-fw-load.patch   Dongxiao Xu
• [poky] [PATCH 02/39] lrzsz: add upstream status for lrzsz's patches   Dongxiao Xu
• [poky] [PATCH 03/39] bluez: add upstream status for bluez's patches   Dongxiao Xu
• [poky] [PATCH 04/39] bluez-dtl1-workaround: add upstream status for COPYING.patch   Dongxiao Xu
• [poky] [PATCH 05/39] libgsmd: add upstream status for gsm's patches.   Dongxiao Xu
• [poky] [PATCH 06/39] gypsy: add upstream status for gypsy's patch   Dongxiao Xu
• [poky] [PATCH 07/39] libpcap: add upstream status for libpcap's patches   Dongxiao Xu
• [poky] [PATCH 08/39] ppp: add upstream status for ppp's patches   Dongxiao Xu
• [poky] [PATCH 09/39] libtelepathy: add upstream status for libtelepathy's patches   Dongxiao Xu
• [poky] [PATCH 10/39] telepathy-python: add upstream status for telepahty-python's patches   Dongxiao Xu
• [poky] [PATCH 11/39] wireless-tools: add upstream status for wireless-tools's patches   Dongxiao Xu
• [poky] [PATCH 12/39] wpa-supplicant: add upstream status for wpa-supplicant   Dongxiao Xu
• [poky] [PATCH 13/39] zeroconf: add upstream status for zeroconf's patch   Dongxiao Xu
• [poky] [PATCH 14/39] glibc: add upstream status for glibc's patches   Dongxiao Xu
• [poky] [PATCH 15/39] dpkg: add upstream status for dpkg's patches   Dongxiao Xu
• [poky] [PATCH 16/39] makedevs: add upstream status for makedevs's patch   Dongxiao Xu
• [poky] [PATCH 17/39] opkg: add upstream status for opkg's patches   Dongxiao Xu
• [poky] [PATCH 18/39] opkg-utils: add upstream status for opkg-utils's patch   Dongxiao Xu
• [poky] [PATCH 19/39] minicom: add upstream status for minicom patches   Dongxiao Xu
• [poky] [PATCH 20/39] rpcbind: add upstream status for rpcbind's patch   Dongxiao Xu
• [poky] [PATCH 21/39] which: add upstream status for which's patch   Dongxiao Xu
• [poky] [PATCH 22/39] clutter-gst: add upstream status for clutter-gst's patches   Dongxiao Xu
• [poky] [PATCH 23/39] flac: add upstream status for flac's patches   Dongxiao Xu
• [poky] [PATCH 24/39] gst-ffmpeg: add upstream status for gst-ffmpeg's patch   Dongxiao Xu
• [poky] [PATCH 25/39] liba52: add upstream status for liba52's patch   Dongxiao Xu
• [poky] [PATCH 26/39] libid3tag: add upstream status for libid3tag   Dongxiao Xu
• [poky] [PATCH 27/39] libmusicbrainz: add upstream status for libmusicbrainz's patch   Dongxiao Xu
• [poky] [PATCH 28/39] pulseaudio: add upstream status for pulseaudio patches   Dongxiao Xu
• [poky] [PATCH 29/39] db: add upstream status for db's patch   Dongxiao Xu
• [poky] [PATCH 30/39] neon: add upstream status for neon's patch   Dongxiao Xu
• [poky] [PATCH 31/39] taglib: add upstream status for taglib's patches   Dongxiao Xu
• [poky] [PATCH 32/39] libetpan: add upstream status for libetpan's patch   Dongxiao Xu
• [poky] [PATCH 33/39] libopensync: add upstream status for libopensync's patches   Dongxiao Xu
• [poky] [PATCH 34/39] libopensync-plugin-evolution2: add upstream status for its patch   Dongxiao Xu
• [poky] [PATCH 35/39] libopensync-plugin-syncml: add upstream status for its patch   Dongxiao Xu
• [poky] [PATCH 36/39] libsyncml: add upstream status for libsyncml's patch   Dongxiao Xu
• [poky] [PATCH 37/39] empathy: add upstream status for empathy's patch   Dongxiao Xu
• [poky] [PATCH 38/39] wv: add upstream status for wv's patch   Dongxiao Xu
• [poky] [PATCH 39/39] xournal: add upstream status for xournal's patch   Dongxiao Xu
• [poky] [PATCH 1/1] linux-yocto: move non-core machines to meta-yocto   Richard Purdie
• [poky] help adding perl module   Marc
• [poky] [PATCH] atom-pc: use linux-yocto (2.6.37) kernel   Darren Hart
• [poky] [OE-core] [PATCH 0/3] linux-yocto: consolidated pull request   Saul Wold
• [poky] [PATCH] atom-pc: use linux-yocto (2.6.37) kernel   Saul Wold
• [poky] [PATCH] toolchain-qte: include cross-compiler and fix env script   Saul Wold
• [poky] [KERNEL][linux-yocto-dev PATCH 0/3] emgd 1.61 upgrade for 2.6.39   Tom Zanussi
• [poky] [KERNEL][linux-yocto-dev PATCH 1/3] yocto/emgd: emgd 1.61 driver   Tom Zanussi
• [poky] [KERNEL][linux-yocto-dev PATCH 2/3] yocto/emgd: build fixups   Tom Zanussi
• [poky] [KERNEL][linux-yocto-dev PATCH 3/3] yocto/emgd: 2.6.39 fixes   Tom Zanussi
• [poky] [KERNEL][linux-yocto-dev PATCH 0/1] merge emgd feature branch into crownbay for 2.6.39   Tom Zanussi
• [poky] [KERNEL][linux-yocto-dev PATCH] bsp/crownbay: merge emgd branch   Tom Zanussi
• [poky] [PATCH 01/16] gcc-4.6.0: Apply linaro patches   Nitin A Kamble
• [poky] [PATCH 00/16] fixes related to gcc 4.6.0 & patch upstream-status fields   Nitin A Kamble
• [poky] [PATCH 03/16] pax: fix for compiling with gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 04/16] systemtap: fix for compilation with gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 02/16] mdadm: compilation fix for gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 05/16] kexec-tools: fix compiler errors with gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 06/16] libzypp: fix compilatoin with gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 08/16] tar: fix Upstream-Status format   Nitin A Kamble
• [poky] [PATCH 07/16] libpcre: fix the Upstream-Status format   Nitin A Kamble
• [poky] [PATCH 09/16] sat-solver: fix Upstream-Status format   Nitin A Kamble
• [poky] [PATCH 10/16] cpio: fix upstream-status format   Nitin A Kamble
• [poky] [PATCH 11/16] subversion: fix upstream-status format   Nitin A Kamble
• [poky] [PATCH 12/16] python-imaging: fix upstream-status format   Nitin A Kamble
• [poky] [PATCH 13/16] patch-2.5.9: fix upstream-status format   Nitin A Kamble
• [poky] [PATCH 14/16] patch-2.6.1: fix upstream-status format   Nitin A Kamble
• [poky] [PATCH 16/16] gcc-4.5.1: fix upstream-status format   Nitin A Kamble
• [poky] [PATCH 15/16] binutils: fix upstream status format   Nitin A Kamble
• [poky] [PATCH 1/1] poky-defaults: fix defaults for libgcc recipes   Nitin A Kamble
• [poky] [PATCH 0/1] one high prio bugfix   Nitin A Kamble
• [poky] GCC 4.6.0 on ARM?   Kamble, Nitin A
• [poky] [PATCH 0/5] more fixes related to gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 3/5] web: fix typo in Makefile   Nitin A Kamble
• [poky] [PATCH 4/5] zaurusd: fix a typo in Makefile   Nitin A Kamble
• [poky] [PATCH 2/5] matchbox-wm-2: fix typo in Makefile   Nitin A Kamble
• [poky] [PATCH 5/5] dtc: fix compilation with gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 1/5] libunique: Fix for compilation with gcc 4.6.0   Nitin A Kamble
• [poky] [PATCH 00/24] Upstream-Status Updates   Dexuan Cui
• [poky] [PATCH 01/24] tcf-agent: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 02/24] screen: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 03/24] which (GPLv2): update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 04/24] gnome-vfs: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 05/24] libart-lgpl: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 06/24] librsvg: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 07/24] fontconfig: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 08/24] freetype: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 09/24] libxsettings-client: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 10/24] libxcb: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 11/24] libx11: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 12/24] libx11-trim: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 13/24] libxcalibrate: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 14/24] libxcomposite: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 15/24] libxfont: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 16/24] xtrans: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 17/24] calibrateproto: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 18/24] latencytop: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 19/24] oprofile: update its patch's Upstream-Status and remove an unused patch   Dexuan Cui
• [poky] [PATCH 20/24] powertop: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 21/24] settings-daemon: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 22/24] gnome-settings-daemon: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 23/24] libxklavier: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 24/24] liblbxutil: update its patch's Upstream-Status   Dexuan Cui
• [poky] [PATCH 0/3] Add init scripts and make a link for sendmail   Xiaofeng Yan
• [poky] [PATCH 1/3] wq!lsb: Add init-functions to lsb-image   Xiaofeng Yan
• [poky] [PATCH 2/3] init-functions: Conforming applications may install one or more initialization scripts   Xiaofeng Yan
• [poky] [PATCH 3/3] lsbsetup: Add link for sendmail   Xiaofeng Yan
• [poky] [PATCH 0/8] Update patch upstream-status   Yu Ke
• [poky] [PATCH 1/8] iputils: update patch Upstream-Status   Yu Ke
• [poky] [PATCH 2/8] mktemp: update patch Upstream-Status   Yu Ke
• [poky] [PATCH 3/8] xinetd: update Upstream-Status   Yu Ke
• [poky] [PATCH 4/8] libdrm: update patch Upstream-Status   Yu Ke
• [poky] [PATCH 5/8] qemugl: update patch Upstream-Status   Yu Ke
• [poky] [PATCH 6/8] x11-common: update patch Upstream-Status   Yu Ke
• [poky] [PATCH 7/8] xorg-app: update patch Upstream-Status   Yu Ke
• [poky] [PATCH 8/8] xorg-driver: update patch Upstream-Status   Yu Ke
• [poky] gstreamer-ti linker crash   Gerard van den Bosch
• [poky] gstreamer-ti linker crash   Gerard van den Bosch
• [poky] GCC 4.6.0 on ARM?   Gary Thomas
• [poky] Problem with porting poky for Sugarbay platform sandybridge machine   chinmaya hoshing
• [poky] Problem with porting poky for Sugarbay platform sandybridge machine   Tom Zanussi
• [poky] [PATCH 0/2] Add meta-skeleton and a skeleton for init scripts   Robert Yang
• [poky] [PATCH 1/2] Add the layer meta-skeleton   Robert Yang
• [poky] [PATCH 2/2] Add a skeleton for init scripts   Robert Yang
• [poky] SSTATE MIRRORS only partly working?   Gary Thomas
• [poky] [KERNEL][linux-yocto-dev PATCH 0/3] emgd 1.61 upgrade for 2.6.39   Bruce Ashfield
• [poky] [KERNEL][linux-yocto-dev PATCH 0/1] merge emgd feature branch into crownbay for 2.6.39   Bruce Ashfield
• [poky] GCC 4.6.0 on ARM?   Kamble, Nitin A
• [poky] GCC 4.6.0 on ARM?   Gary Thomas
• [poky] [PATCH 0/3] Add init scripts and make a link for sendmail   Richard Purdie
• [poky] [OE-core] [PATCH 0/1] one high prio bugfix   Richard Purdie
• [poky] [PATCH 0/4][Image Creator]Put extra requested fields into different cache files   Richard Purdie
• [poky] [OE-core] [PATCH 0/5] more fixes related to gcc 4.6.0   Richard Purdie
• [poky] RFC: create-pull-request / send-pull-request updates   Darren Hart
• [poky] [OE-core] [PATCH 00/16] fixes related to gcc 4.6.0 & patch upstream-status fields   Richard Purdie
• [poky] RFC: create-pull-request / send-pull-request updates   Koen Kooi
• [poky] [PATCH 1/2] Add the layer meta-skeleton   Darren Hart
• [poky] RFC: create-pull-request / send-pull-request updates   Khem Raj
• [poky] GCC 4.6.0 on ARM?   Khem Raj
• [poky] RFC: create-pull-request / send-pull-request updates   Richard Purdie
• [poky] [PATCH 2/2] Add a skeleton for init scripts   Darren Hart
• [poky] RFC: create-pull-request / send-pull-request updates   Darren Hart
• [poky] RFC: create-pull-request / send-pull-request updates   Darren Hart
• [poky] qemuarm hangs   Gary Thomas
• [poky] qemuarm hangs   Bruce Ashfield
• [poky] RFC: create-pull-request / send-pull-request updates   Tom Rini
• [poky] qemuarm hangs   Gary Thomas
• [poky] qemuarm hangs   Bruce Ashfield
• [poky] qemuarm hangs   Richard Purdie
• [poky] qemuarm hangs   Richard Purdie
• [poky] [PATCH 0/1] Fix GUI's   Joshua Lock
• [poky] [PATCH 1/1] bitbake/ui: Fix Gtk+ GUI's after recent cache changes   Joshua Lock
• [poky] No rootfs for beagleboard after bernard 5.0   Robert Berger
• [poky] qemuarm hangs   Gary Thomas
• [poky] No rootfs for beagleboard after bernard 5.0   Darren Hart
• [poky] directdisk images - replace the image type with a script?   Darren Hart
• [poky] [RFC][PATCH] qt4: add target qmake to qt4-tools package   Ilya Yanok
• [poky] Setting image size   Gary Thomas
• [poky] Setting image size   Joshua Lock
• [poky] Setting image size   Gary Thomas
• [poky] [PATCH 2/2] Add a skeleton for init scripts   Robert Yang
• [poky] [PATCH 0/4][Image Creator]Put extra requested fields into different cache files   Ke, Liping
• [poky] RFC: create-pull-request / send-pull-request updates   Khem Raj
• [poky] [PATCH 0/1]bash:enable update-alternatives to use bash as default shell   Jingdong Lu
• [poky] [PATCH 1/1] bash: enable update-alternative to use bash as default shell   Jingdong Lu
• [poky] directdisk images - replace the image type with a script?   Richard Purdie
• [poky] No rootfs for beagleboard after bernard 5.0   Richard Purdie
• [poky] [PATCH 0/1] meta-qt3: Add discription to README   Xiaofeng Yan
• [poky] [PATCH 1/1] meta-qt3: Add discription to README   Xiaofeng Yan
• [poky] [PATCH 0/1] Qt4OpenGL: Enable configuration for opengl on platfrom emenlow and mpc8315e-rdb   Xiaofeng Yan
• [poky] [PATCH 1/1] Qt4OpenGL: Enable libopengl for platform emenlow and mpc8315e-rdb   Xiaofeng Yan
• [poky] [PATCH 2/2] Add a skeleton for init scripts   Robert Yang
• [poky] QEMU networking   Gary Thomas
• [poky] QEMU networking   Gary Thomas
• [poky] QEMU networking   Mark Hatle
• [poky] QEMU networking   Gary Thomas
• [poky] QEMU networking   Mark Hatle
• [poky] [PATCH 2/2] Add a skeleton for init scripts   Saul Wold
• [poky] [PATCH] qt4-tools-nativesdk: -arch is required for nativesdk build   Ilya Yanok
• [poky] [PATCH 1/1] meta-qt3: Add discription to README   Saul Wold
• [poky] Commit and Patch message guidelines - fifth draft   Mark Hatle
• [poky] [PATCH 0/1] kern-tools: error if features are not found   Bruce Ashfield
• [poky] [PATCH 1/1] kern-tools: error if features are not found   Bruce Ashfield
• [poky] [OE-core] [PATCH 1/1] kern-tools: error if features are not found   Bruce Ashfield
• [poky] [PATCH 2/2] Add a skeleton for init scripts   Darren Hart
• [poky] Commit and Patch message guidelines - fifth draft   Darren Hart
• [poky] [PATCH 0/1] a fix for gcc 4.6.0 target recipe   Nitin A Kamble
• [poky] [PATCH 1/1] gcc: fix target gcc runtime issue   Nitin A Kamble
• [poky] Commit and Patch message guidelines - fifth draft   Mark Hatle
• [poky] Commit and Patch message guidelines - fifth draft   Darren Hart
• [poky] directdisk images - replace the image type with a script?   Darren Hart
• [poky] No rootfs for beagleboard after bernard 5.0   Robert Berger
• [poky] third party toolchain   Robert Berger
• [poky] No rootfs for beagleboard after bernard 5.0   Gary Thomas
• [poky] [KERNEL][linux-yocto PATCH 0/1] remove emgd-1.5.2 from 2.6.37   Tom Zanussi
• [poky] [KERNEL][linux-yocto PATCH 0/1] remove emgd-1.5.2 from 2.6.37   Tom Zanussi
• [poky] [KERNEL][linux-yocto PATCH 1/1] emgd: remove for 1.6.1 upgrade   Tom Zanussi
• [poky] [KERNEL][linux-yocto PATCH 0/4] emgd 1.6.1 upgrade for 2.6.37   Tom Zanussi
• [poky] [KERNEL][linux-yocto PATCH 1/4] yocto/emgd: emgd 1.61 driver   Tom Zanussi
• [poky] [KERNEL][linux-yocto PATCH 2/4] yocto/emgd: build fixups   Tom Zanussi
• [poky] [KERNEL][linux-yocto PATCH 3/4] yocto/emgd: 2.6.39 fixes   Tom Zanussi
• [poky] [KERNEL][linux-yocto PATCH 4/4] emgd: backfix for 2.6.37   Tom Zanussi
• [poky] Commit and Patch message guidelines - fifth draft   William Mills
• [poky] [KERNEL][linux-yocto PATCH 0/1] merge emgd feature branch into crownbay for 2.6.37   Tom Zanussi
• [poky] [KERNEL][linux-yocto PATCH 1/1] bsp/crownbay: merge emgd branch   Tom Zanussi
• [poky] [PATCH 0/4] meta-crownbay: emgd 1.6.1 upgrade   Tom Zanussi
• [poky] [PATCH 1/4] meta-crownbay: new recipe for emgd 1.6.1 driver binaries   Tom Zanussi
• [poky] [PATCH 2/4] meta-crownbay: add xserver-xf86-dri-lite_1.9.3 .bbappend   Tom Zanussi
• [poky] [PATCH 3/4] meta-crownbay: update crownbay.conf   Tom Zanussi
• [poky] [PATCH 4/4] meta-crownbay: remove obsolete graphics recipes   Tom Zanussi
• [poky] Commit and Patch message guidelines - fifth draft   Darren Hart
• [poky] third party toolchain   Adrian Alonso
• [poky] [PATCH 01/25] gcc: fix target gcc runtime issue   Nitin A Kamble
• [poky] [PATCH 02/25] tcmode-default: fix a typo   Nitin A Kamble
• [poky] [PATCH 00/25] Misc commits   Nitin A Kamble
• [poky] [PATCH 05/25] binutils: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 04/25] python: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 03/25] gcc 4.5.1 4.6.0: remove unused patches   Nitin A Kamble
• [poky] [PATCH 06/25] gcc 4.5.1 4.6.0: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 10/25] distcc: update upstream-status of patches   Nitin A Kamble
• [poky] [PATCH 08/25] automake: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 09/25] bison: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 11/25] fstests: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 07/25] autoconf: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 14/25] libtool: update upstream status of patches   Nitin A Kamble
• [poky] [PATCH 12/25] gdb: update upstream-status of patches   Nitin A Kamble
• [poky] [PATCH 13/25] intltool: update upstream-status of patches   Nitin A Kamble
• [poky] [PATCH 16/25] make: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 15/25] linux-libc-headers: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 17/25] perl: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 22/25] tcl: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 25/25] m4: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 24/25] gmp: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 18/25] python-pycurl: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 23/25] gnu-config: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 20/25] python-pyrex: update upstream-status for patches   Nitin A Kamble
• [poky] [PATCH 19/25] python-pygobject: update upstream status for patches   Nitin A Kamble
• [poky] [PATCH 21/25] quilt: update upstream-status of patches   Nitin A Kamble
• [poky] Commit and Patch message guidelines - fifth draft   William Mills
• [poky] Commit and Patch message guidelines - fifth draft   Darren Hart
• [poky] [PATCH][meta-intel] linux-yocto*: extend FILESEXTRAPATHS instead of clobber them   Darren Hart
• [poky] [PATCH 1/2] distro_check.py: Add a new function to reduce the repeat code   Mei Lei
• [poky] [PATCH 2/2] distrodata.bbclass: Add checklicense task   Mei Lei
• [poky] [PATCH 0/2] Add checklicense task to get missing license text   Mei Lei
• [poky] [PATCH 0/4] Add some packages for LSB test   Kang Kai
• [poky] [PATCH 1/4] libxml-sax-perl: added to create LSB olver test report   Kang Kai
• [poky] [PATCH 2/4] foomatic-filters: add a link to pass LSB printing test   Kang Kai
• [poky] [PATCH 3/4] task-core-lsb: add packages into lsb image   Kang Kai
• [poky] [PATCH 4/4] lsbsetup: recreate locale fr_FR   Kang Kai
• [poky] [PATCH 25/25] m4: update upstream-status for patches   Richard Purdie
• [poky] [PATCH 00/25] Misc commits   Richard Purdie
• [poky] [RFC][PATCH] qt4: add target qmake to qt4-tools package   Paul Eggleton
• [poky] Issue while building for zoom board   embedded.yogesh
• [poky] [RFC][PATCH] qt4: add target qmake to qt4-tools package   Koen Kooi
• [poky] Issue while building for zoom board   Gerard van den Bosch
• [poky] meta-intel   Gary Thomas
• [poky] [OE-core] [RFC][PATCH] qt4: add target qmake to qt4-tools package   Ilya Yanok
• [poky] meta-intel   Tom Zanussi
• [poky] [PATCH 0/3] Qt4 fixes   Paul Eggleton
• [poky] [PATCH 1/3] qt4: update from 4.7.2 to 4.7.3   Paul Eggleton
• [poky] [PATCH 2/3] distro_tracking_fields.inc: update for qt 4.7.3 upgrade   Paul Eggleton
• [poky] [PATCH 3/3] qt4: split out SQL driver config flags to QT_SQL_DRIVER_FLAGS   Paul Eggleton
• [poky] [PATCH][meta-intel] linux-yocto*: extend FILESEXTRAPATHS instead of clobber them   Tom Zanussi
• [poky] beagleboard and latest from git   Robert Berger
• [poky] [PATCH] qt4-tools-nativesdk: build qmake for SDK_ARCH   Ilya Yanok
• [poky] [PATCH 2/4] foomatic-filters: add a link to pass LSB printing test   Saul Wold
• [poky] meta-intel   Gary Thomas
• [poky] [PATCH 2/4] foomatic-filters: add a link to pass LSB printing test   Mark Hatle
• [poky] [PATCH 1/2] distro_check.py: Add a new function to reduce the repeat code   Joshua Lock
• [poky] [PATCH 2/2] distrodata.bbclass: Add checklicense task   Joshua Lock
• [poky] [PATCH 1/3] qt4: update from 4.7.2 to 4.7.3   Joshua Lock
• [poky] [PATCH 3/3] qt4: split out SQL driver config flags to QT_SQL_DRIVER_FLAGS   Joshua Lock
• [poky] [PATCH 0/1] fix a bitbake error for current master branch   Nitin A Kamble
• [poky] [PATCH 1/1] task-core-nfs: fix a bitbake error   Nitin A Kamble
• [poky] beagleboard and latest from git   Robert Berger
• [poky] beagleboard and latest from git   Darren Hart
• [poky] [PATCH 25/25] m4: update upstream-status for patches   Kamble, Nitin A
• [poky] [PATCH 00/39][PULL] Upstream Status Update   Saul Wold
• [poky] [PATCH 00/24] Upstream-Status Updates   Saul Wold
• [poky] [PATCH 0/8] Update patch upstream-status   Saul Wold
• [poky] [PATCH 0/1] Qt4OpenGL: Enable configuration for opengl on platfrom emenlow and mpc8315e-rdb   Saul Wold
• [poky] [PATCH 0/1]bash:enable update-alternatives to use bash as default shell   Saul Wold
• [poky] [PATCH] qt4-tools-nativesdk: -arch is required for nativesdk build   Saul Wold
• [poky] [PATCH 0/1]distro_check: Fix a bug when creating log file   Mei Lei
• [poky] [PATCH 1/1] distro_check: Fix a bug in distro_check.py   Mei Lei
• [poky] [PATCH 0/4] Add some packages for LSB test V2   Kang Kai
• [poky] [PATCH 1/4] libxml-sax-perl: added to create LSB olver test report   Kang Kai
• [poky] [PATCH 2/4] foomatic-filters: add a link to pass LSB printing test   Kang Kai
• [poky] [PATCH 3/4] task-core-lsb: add packages into lsb image   Kang Kai
• [poky] [PATCH 4/4] lsbsetup: recreate locale fr_FR   Kang Kai
• [poky] beagleboard auto-boot   Robert Berger
• [poky] [PATCH 0/4] crownbay fixes   Tom Zanussi
• [poky] [PATCH 1/4] crownbay: remove custom BASE_PACKAGE_ARCH and PACKAGE_EXTRA_ARCHS   Tom Zanussi
• [poky] [PATCH 2/4] crownbay-noemgd: remove custom BASE_PACKAGE_ARCH and PACKAGE_EXTRA_ARCHS   Tom Zanussi
• [poky] [PATCH 3/4] fishriver: remove custom BASE_PACKAGE_ARCH and PACKAGE_EXTRA_ARCHS   Tom Zanussi
• [poky] [PATCH 4/4] crownbay-noemgd: add crownbay-noemgd as COMPATIBLE_MACHINE to linux-yocto bbappend   Tom Zanussi
• [poky] [PATCH 0/1] n450 compile fix   Tom Zanussi
• [poky] [PATCH 1/1] n450: fix n450-audio LIC_FILES_CHKSUM   Tom Zanussi
• [poky] [PATCH 1/4] crownbay: remove custom BASE_PACKAGE_ARCH and PACKAGE_EXTRA_ARCHS   Saul Wold
• [poky] [PATCH 1/4] crownbay: remove custom BASE_PACKAGE_ARCH and PACKAGE_EXTRA_ARCHS   Tom Zanussi
• [poky] beagle-xm more testing   Robert Berger
• [poky] Weekly Test Report for Yocto 20110506 Build   Xu, Jiajun
• [poky] Commit and Patch message guidelines - fifth draft   Leon Woestenberg
• [poky] [PATCH 0/1] [RFC]git fetch support for rebaseable repo (a.k.a crazy git fetcher)   Yu Ke
• [poky] [PATCH 1/1] git fetcher: add support for rebaseable git repo   Yu Ke
• [poky] [PATCH 2/2] Add a skeleton for init scripts   Robert Yang
• [poky] [PATCH 0/1] Recipe patch Upstream-Status additions   Scott Garman
• [poky] [PATCH 1/1] recipes: Add Upstream-Status to various recipe patches   Scott Garman
• [poky] [PATCH 0/2] patch upstream status update   Yu Ke
• [poky] [PATCH 1/2] xserver-kdrive: upgrade from 1.7.99.2 to 1.10.1   Yu Ke
• [poky] [PATCH 2/2] Upstream-Status update for several recipes   Yu Ke
• [poky] [PATCH 1/4] crownbay: remove custom BASE_PACKAGE_ARCH and PACKAGE_EXTRA_ARCHS   Richard Purdie
• [poky] [PATCH 1/4] crownbay: remove custom BASE_PACKAGE_ARCH and PACKAGE_EXTRA_ARCHS   Richard Purdie
• [poky] [PATCH resend] Kernel command line options for runqemu   Gary Thomas
• [poky] [PATCH 2/2] distrodata.bbclass: Add checklicense task   Mei, Lei
• [poky] [PATCH 0/1] Add a new task and fix some bugs in distro_check.py   Mei Lei
• [poky] [PATCH 1/1] Add a new task checklicense and fix some bugs in distro_check.py   Mei Lei
• [poky] [PATCH 1/4] crownbay: remove custom BASE_PACKAGE_ARCH and PACKAGE_EXTRA_ARCHS   Tom Zanussi
• [poky] [PATCH 2/4] foomatic-filters: add a link to pass LSB printing test   Richard Purdie
• [poky] V2 [PATCH 0/3] Add meta-skeleton and a skeleton for init scripts   Robert Yang
• [poky] V2 [PATCH 1/3] Add the layer meta-skeleton   Robert Yang
• [poky] V2 [PATCH 2/3] Add pidofproc to ${sysconfdir}/init.d/functions   Robert Yang
• [poky] V2 [PATCH 3/3] Add a skeleton for init scripts   Robert Yang
• [poky] [PATCH resend] Kernel command line options for runqemu   Saul Wold
• [poky] [PATCH resend] Kernel command line options for runqemu   Gary Thomas
• [poky] V2 [PATCH 2/3] Add pidofproc to ${sysconfdir}/init.d/functions   Darren Hart
• [poky] [PATCH resend] Kernel command line options for runqemu   Scott Garman
• [poky] V2 [PATCH 3/3] Add a skeleton for init scripts   Darren Hart
• [poky] V2 [PATCH 0/3] Add meta-skeleton and a skeleton for init scripts   Darren Hart
• [poky] [PATCH 1/1] Add a new task checklicense and fix some bugs in distro_check.py   Joshua Lock
• [poky] beagle-xm more testing   Darren Hart
• [poky] [PATCH 0/1] Fix GUI's   Joshua Lock
• [poky] [PATCH 0/1] Fix GUI's   Richard Purdie
• [poky] [PATCH 0/1] Add brief layer blurb to BSP Developer's Guide   Tom Zanussi
• [poky] [PATCH 1/1] bsp-guide: add short blurb on how to use BSP layers   Tom Zanussi
• [poky] GCC 4.6.0 on ARM?   Kamble, Nitin A
• [poky] [PATCH 0/1] updated bibake error fix   Nitin A Kamble
• [poky] [PATCH 1/1] task-core-nfs: fix a bitbake error   Nitin A Kamble
• [poky] GCC 4.6.0 on ARM?   Gary Thomas
• [poky] [PATCH 0/1] More recipe patch Upstream-Status additions   Scott Garman
• [poky] [PATCH 1/1] recipes: add Upstream-Status to various recipe patches   Scott Garman
• [poky] beagle-xm more testing   Robert Berger
• [poky] V2 [PATCH 0/3] Add meta-skeleton and a skeleton for init scripts   Robert Yang
• [poky] V3 [PATCH 0/4] Add meta-skeleton and a skeleton for init scripts   Robert Yang
• [poky] V3 [PATCH 1/4] Add the layer meta-skeleton   Robert Yang
• [poky] V3 [PATCH 2/4] Cleanup the whitespace in functions   Robert Yang
• [poky] V3 [PATCH 3/4] Add pidofproc to ${sysconfdir}/init.d/functions   Robert Yang
• [poky] V3 [PATCH 4/4] Add a skeleton for init scripts   Robert Yang
• [poky] V3 [PATCH 3/4] Add pidofproc to ${sysconfdir}/init.d/functions   Darren Hart
• [poky] V3 [PATCH 4/4] Add a skeleton for init scripts   Darren Hart
• [poky] V3 [PATCH 0/4] Add meta-skeleton and a skeleton for init scripts   Darren Hart
• [poky] V3 [PATCH 0/4] Add meta-skeleton and a skeleton for init scripts   Robert Yang
• [poky] [PATCH 0/3] Add init-functions, libQtOpenGL.so* to lsb-image   Xiaofeng Yan
• [poky] [PATCH 1/3] lsb: Install init-functions to rpm package   Xiaofeng Yan
• [poky] [PATCH 2/3] lsbsetup: Add a link for lsb test   Xiaofeng Yan
• [poky] [PATCH 3/3] task-core-lsb: Add libQtOpenGL.so* library to lsb-image   Xiaofeng Yan
• [poky] V4 [PATCH 0/4] Add meta-skeleton and a skeleton for init scripts   Robert Yang
• [poky] V4 [PATCH 1/4] Add the layer meta-skeleton   Robert Yang
• [poky] V4 [PATCH 2/4] Cleanup the whitespace in functions   Robert Yang
• [poky] V4 [PATCH 3/4] Add pidofproc to ${sysconfdir}/init.d/functions   Robert Yang
• [poky] V4 [PATCH 4/4] Add a skeleton for init scripts   Robert Yang
• [poky] [PATCH 0/8][PULL] Upstream Status Update   Dongxiao Xu
• [poky] [PATCH 1/8] gypsy: Add upstream status information for gypsy's patch   Dongxiao Xu
• [poky] [PATCH 2/8] alsa-utils: fix upstream status typo   Dongxiao Xu
• [poky] [PATCH 3/8] pulseaudio: add upstream status for pulseaudio-0.9.15's patches   Dongxiao Xu
• [poky] [PATCH 4/8] hostap: add upstream status for hostap's patch   Dongxiao Xu
• [poky] [PATCH 5/8] glibc: add upstream status for glibc's patch   Dongxiao Xu
• [poky] [PATCH 6/8] glib-2.0: add upstream status for glib-2.0's patch   Dongxiao Xu
• [poky] [PATCH 7/8] mtd-utils: add upstream status for mtd-utils patches   Dongxiao Xu
• [poky] [PATCH 8/8] add upstream status for opkg's patches   Dongxiao Xu
• [poky] [PATCH 0/1] Update README of meta-qt3   Xiaofeng Yan
• [poky] [PATCH 1/1] README: Update README of meta-qt3   Xiaofeng Yan
• [poky] SSTATE MIRRORS only partly working?   Richard Purdie
• [poky] V4 [PATCH 0/4] Add meta-skeleton and a skeleton for init scripts   Darren Hart
• [poky] [PATCH 0/1] [RFC]git fetch support for rebaseable repo (a.k.a crazy git fetcher)   Richard Purdie
• [poky] [PATCH 0/3] Add init-functions, libQtOpenGL.so* to lsb-image   Richard Purdie
• [poky] beagle-xm more testing   Darren Hart
• [poky] [PATCH 0/8][PULL] Upstream Status Update   Richard Purdie
• [poky] GCC 4.6.0 on ARM?   Kamble, Nitin A
• [poky] [PATCH 1/4] crownbay: remove custom BASE_PACKAGE_ARCH and PACKAGE_EXTRA_ARCHS   Richard Purdie
• [poky] [PATCH 1/4] crownbay: remove custom BASE_PACKAGE_ARCH and PACKAGE_EXTRA_ARCHS   Tom Zanussi
• [poky] [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm   Nitin A Kamble
• [poky] [PATCH 1/1] tcmode-default: switch to gcc 4.6.0 for x86, x86-64 & arm   Nitin A Kamble
• [poky] [PATCH 0/1] More recipe patch Upstream-Status additions   Saul Wold
• [poky] [PATCH 0/1] Recipe patch Upstream-Status additions   Saul Wold
• [poky] [PATCH 0/1] Add a new task and fix some bugs in distro_check.py   Saul Wold
• [poky] [PATCH 1/1] gcc: remove unused patches and move patches in proper dir   Nitin A Kamble
• [poky] [PATCH 0/1] patch upstream status and cleaning   Nitin A Kamble
• [poky] SSTATE MIRRORS only partly working?   Gary Thomas
• [poky] [PATCH 0/1] Update README of meta-qt3   Saul Wold
• [poky] [PATCH 0/2] patch upstream status update   Saul Wold
• [poky] [PATCH 0/2] patch upstream status update   Yu Ke
• [poky] Weekly Test Report for Yocto 1.0.1 Build - 20110513   Xu, Jiajun
• [poky] Disable screen standby   Gerard van den Bosch
• [poky] Disable screen standby   Richard Purdie
• [poky] [PATCH 0/1] [YOCTO #1079]: Rename this file and add a link for lsb test   Xiaofeng Yan
• [poky] [PATCH 1/1] lsbsetup: Rename this file and add a link for lsb test   Xiaofeng Yan
• [poky] Disable screen standby   Gerard van den Bosch
• [poky] Problems creating a new BSP   Tim Cussins
• [poky] Problems creating a new BSP   Bruce Ashfield
• [poky] [PATCH 1/1] lsbsetup: Rename this file and add a link for lsb test   Saul Wold
• [poky] [PATCH 0/1] patch upstream status and cleaning   Saul Wold
• [poky] Problems creating a new BSP   Tim Cussins
• [poky] Poky master broken   Gary Thomas
• [poky] Poky master broken   Gary Thomas
• [poky] Poky master broken   Saul Wold
• [poky] Problems creating a new BSP   Robert Berger
• [poky] Problems creating a new BSP   Bruce Ashfield
• [poky] [PATCH 0/1] [YOCTO #1079]Rename lsbsetup_0.9 file and add a link for lsb test   Xiaofeng Yan
• [poky] [PATCH 1/1] [YOCTO #1079]:Rename this file and add a link for lsb   Xiaofeng Yan
• [poky] strangeness: udhcpc runs when 'ip=dhcp' is in kernel cmdline   Tim Cussins
• [poky] Fullpass Test Report for Yocto 1.0.1 Build - 20110513   Xu, Jiajun
• [poky] RPM vs IPK   Gary Thomas
• [poky] QEMU networking   Scott Garman
• [poky] RPM vs IPK   Mark Hatle
• [poky] RPM vs IPK   Gary Thomas
• [poky] QEMU networking   Gary Thomas
• [poky] RPM vs IPK   Stewart, David C
• [poky] RPM vs IPK   Gary Thomas
• [poky] QEMU networking   Joshua Lock
• [poky] V4 [PATCH 0/4] Add meta-skeleton and a skeleton for init scripts   Saul Wold
• [poky] Upcoming M1 RC cut off (now with new and improved process!)   Elizabeth Flanagan
• [poky] [PATCH 0/1] [YOCTO #1090]: Fix this bug   Xiaofeng Yan
• [poky] [PATCH 1/1] [YOCTO #1090]: Fix bugs   Xiaofeng Yan
• [poky] [PATCH 0/1] ghostscript: add patches to make it run cross compile platform   Kang Kai
• [poky] [PATCH 1/1] ghostscript: fix run failure on mpc8315e   Kang Kai
• [poky] [PATCH 0/1] Add libQtOpenGL* to three hardware platform   Xiaofeng Yan
• [poky] [PATCH 1/1] task-core-lsb: Add library libQtOpenGL* to n450, sugarbay and jasperforest   Xiaofeng Yan
• [poky] OpenGL Machine config -- was Re: [PATCH 1/1] task-core-lsb: Add library libQtOpenGL* to n450, sugarbay and jasperforest   Mark Hatle
• [poky] [OE-core] [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm   Saul Wold
• [poky] [PATCH 1/1] ghostscript: fix run failure on mpc8315e   Richard Purdie
• [poky] [PATCH 1/1] git fetcher: add support for rebaseable git repo   Khem Raj
• [poky] [PATCH 1/1] [YOCTO #1090]: Fix bugs   Saul Wold
• [poky] OpenGL Machine config -- was Re: [PATCH 1/1] task-core-lsb: Add library libQtOpenGL* to n450, sugarbay and jasperforest   Saul Wold
• [poky] OpenGL Machine config -- was Re: [PATCH 1/1] task-core-lsb: Add library libQtOpenGL* to n450, sugarbay and jasperforest   Mark Hatle
• [poky] [PATCH 0/3] fetch2/git: debug updates and minor cleanup   Darren Hart
• [poky] [PATCH 1/3] fetch2/git: ensure network check log matches actual command   Darren Hart
• [poky] [PATCH 2/3] fetch2/git: use urldata basecmd when available   Darren Hart
• [poky] [PATCH 3/3] fetch2/git: use logging.debug() and clarify messages   Darren Hart
• [poky] fetch2/git: questions on read-tree and checkout-index   Darren Hart
• [poky] [OE-core] [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm   Darren Hart
• [poky] [PATCH 1/1] git fetcher: add support for rebaseable git repo   Darren Hart
• [poky] [OE-core] [PATCH 0/1] switch to gcc 4.6.0 for x86 x86-64 & arm   Saul Wold
• [poky] [PATCH 1/1] ghostscript: fix run failure on mpc8315e   Kang Kai
• [poky] [PATCH 0/1]ghostscript: add patches to make it run cross compile platform V2   Kang Kai
• [poky] [PATCH 1/1] ghostscript: fix run failure on mpc8315e   Kang Kai
• [poky] fetch2/git: questions on read-tree and checkout-index   Richard Purdie
• [poky] [PATCH 0/1] sudo: Modify ownership for dircetory "/var/lib"   Xiaofeng Yan
• [poky] [PATCH 1/1] sudo: Modify ownership for directory "/var/lib"   Xiaofeng Yan
• [poky] [PATCH 1/1] sudo: Modify ownership for directory "/var/lib"   Wolfgang Denk
• [poky] [PATCH 1/1] sudo: Modify ownership for directory "/var/lib"   Xiaofeng Yan
• [poky] [PATCH 1/1] sudo: Modify ownership for directory "/var/lib"   Saul Wold
• [poky] [PATCH 1/1] sudo: Modify ownership for directory "/var/lib"   Wolfgang Denk
• [poky] [PATCH 0/3] switch to newer eglibc & gcc versions   nitin.a.kamble at intel.com
• [poky] [PATCH 1/3] tcmode-default: switch to eglibc 2.13 from 2.12   nitin.a.kamble at intel.com
• [poky] [PATCH 2/3] tcmode-default: switch to gcc 4.6.0 for ppc & mips also   nitin.a.kamble at intel.com
• [poky] [PATCH 3/3] gplv2 recipes update upstream status of patches   nitin.a.kamble at intel.com
• [poky] [PATCH 1/1] sudo: Modify ownership for directory "/var/lib"   Saul Wold
• [poky] Do LSB test unreported issues need fix?   Kang Kai
• [poky] [PATCH 0/1] poky-lsb: Add libQtOpenGL to all lsb image for different platform   Xiaofeng Yan
• [poky] [PATCH 1/1] poky-lsb: Add libQtOpenGL* to lsb image for all platform   Xiaofeng Yan
• [poky] [PATCH 0/1] poky-lsb: Add libQtOpenGL to all lsb image for different platform   Xiaofeng Yan
• [poky] [PATCH 1/1] poky-lsb: Add libQtOpenGL* to lsb image for all platform   Xiaofeng Yan
• [poky] How to Enable OMAP3 SGX MODULES on BEAGLEBOARD   Akshat Saha
• [poky] [PATCH 1/1] sudo: Modify ownership for directory "/var/lib"   Xiaofeng Yan
• [poky] Do LSB test unreported issues need fix?   Mark Hatle
• [poky] [PATCH 0/3] switch to newer eglibc & gcc versions   Saul Wold
• [poky] How to Enable OMAP3 SGX MODULES on BEAGLEBOARD   Darren Hart
• [poky] [PATCH 1/1] git fetcher: add support for rebaseable git repo   Yu Ke
• [poky] [PATCH 0/1] poky-lsb: Add libQtOpenGL to all lsb image for different platform   Saul Wold
• [poky] [PATCH 0/1] git fetcher: add doc for supported options   Yu Ke
• [poky] [PATCH 1/1] fetcher2/git: add document for git fetcher supported options   Yu Ke
• [poky] [PATCH 0/1] libx11: fix libX11 keysyms to pass xts5 of lsb   Jingdong Lu
• [poky] [PATCH 1/1] libx11: fix libX11 keysyms to pass xts5 of lsb   Jingdong Lu
• [poky] [PATCH 1/1] fetcher2/git: add document for git fetcher supported options   Koen Kooi
• [poky] [PATCH 1/1] fetcher2/git: add document for git fetcher supported options   Yu Ke
• [poky] [PATCH 0/1] libx11: fix libX11 keysyms to pass xts5 of lsb   Jingdong Lu
• [poky] [PATCH 1/1] libx11: fix libX11 keysyms to pass xts5 of lsb   Jingdong Lu
• [poky] [PATCH 1/1] git fetcher: add support for rebaseable git repo   Darren Hart
• [poky] Over-exuberant error printing?   Gary Thomas
• [poky] [PATCH 1/1] fetcher2/git: add document for git fetcher supported options   Khem Raj
• [poky] [PATCH 0/1] [YOCTO #1079]: Rename this file and add a link for lsb test   Saul Wold
• [poky] [PATCH 0/1] [DOCS] Fixing documentation publishing/makefiles   Elizabeth Flanagan
• [poky] [PATCH 1/1] [DOCS] documentation: Fixing the build system for docs   Elizabeth Flanagan
• [poky] [PATCH 1/1] libx11: fix libX11 keysyms to pass xts5 of lsb   Saul Wold
• [poky] [PATCH 1/1] fetcher2/git: add document for git fetcher supported options   Yu Ke
• [poky] [PATCH 0/2] libQtopenGL: Add this library to lsb image   Xiaofeng Yan
• [poky] [PATCH 1/2] poky-lsb: Compile library libQtOpenGL* for building a lsb image   Xiaofeng Yan
• [poky] [PATCH 2/2] task-core-lsb: Install libQtOpenGL* to lsb image   Xiaofeng Yan
• [poky] [PATCH 0/4] [meta-yocto] tidy up bbappends after oe-core changes   Paul Eggleton
• [poky] [PATCH 1/4] clutter: remove obsolete 1.4 bbappend from meta-yocto   Paul Eggleton
• [poky] [PATCH 2/4] qt4: remove obsolete 4.6.3 bbappend from meta-yocto   Paul Eggleton
• [poky] [PATCH 3/4] task-poky-sdk-gmae: rename bbappends to task-core-sdk-gmae in meta-yocto   Paul Eggleton
• [poky] [PATCH 4/4] uclibc: rename bbappend in meta-yocto to match version in oe-core   Paul Eggleton
• [poky] [PATCH 0/4] [meta-yocto] tidy up bbappends after oe-core changes   Richard Purdie
• [poky] [PATCH 0/1] README.hardware: update installation instructions for beagleboard   Darren Hart
• [poky] [PATCH 1/1] README.hardware: update installation instructions for beagleboard   Darren Hart
• [poky] [PATCH 0/1]ghostscript: add patches to make it run cross compile platform V2   Saul Wold
• [poky] [PATCH 1/1] README.hardware: update installation instructions for beagleboard   Koen Kooi
• [poky] [PATCH V2 0/1] README.hardware: update installation instructions for beagleboard   Darren Hart
• [poky] [PATCH V2 1/1] README.hardware: update installation instructions for beagleboard   Darren Hart
• [poky] [PATCH V2 0/1] README.hardware: update installation instructions for beagleboard   Saul Wold
• [poky] [PATCH 0/2] libQtopenGL: Add this library to lsb image   Saul Wold
• [poky] [PATCH 0/4][Image Creator]Add mulitple extra cache fields request support   Ke Liping
• [poky] [PATCH 1/4][Image Creator]Refactory Current Cache implementation   Ke Liping
• [poky] [PATCH 2/4][Image Creator]Introduce extra cache class for image creator   Ke Liping
• [poky] [PATCH 3/4][Image Creator]Introduce new param caches_array into Cache impl.   Ke Liping
• [poky] [PATCH 4/4][Image Creator]Implement multiple extra cache fields request support   Ke Liping
• [poky] [PATCH 0/2] libQtopenGL: Add this library to lsb image   Xiaofeng Yan
• [poky] [PATCH 0/4][Image Creator]Add mulitple extra cache fields request support   Ke, Liping
• [poky] [Announcement] Bernard 5.0.1 Release   Elizabeth Flanagan
• [poky] wrong rpm name qt package   Gerard van den Bosch
• [poky] [PATCH 0/1] sudo: Add directory "/var/lib" during do_install_prepend   Xiaofeng Yan
• [poky] [PATCH 1/1] sudo: Add directory "/var/lib" to sudo.inc in the stage of do_install_prepend   Xiaofeng Yan
• [poky] wrong rpm name qt package   Richard Purdie
• [poky] [PATCH 1/1] sudo: Add directory "/var/lib" to sudo.inc in the stage of do_install_prepend   Richard Purdie
• [poky] [PATCH 3/4][Image Creator]Introduce new param caches_array into Cache impl.   Richard Purdie
• [poky] wrong rpm name qt package   Gerard van den Bosch
• [poky] Exception in sstate_cleanall() results in the failure of task do_clean   Lu, Lianhao
• [poky] wrong rpm name qt package   Richard Purdie
• [poky] wrong rpm name qt package   Gerard van den Bosch
• [poky] Over-exuberant error printing?   Darren Hart
• [poky] Over-exuberant error printing?   Gary Thomas
• [poky] wrong rpm name qt package   Gerard van den Bosch
• [poky] [PATCH 0/1] use evdev driver for keyboard, fix bug 1108   Yu Ke
• [poky] [PATCH 1/1] xorg.conf: update keyboard config with evdev   Yu Ke
• [poky] [PATCH 0/4] fetcher2 git cleanup   Yu Ke
• [poky] [PATCH 1/4] fetche2 git: change default protocol from rsync to git   Yu Ke
• [poky] [PATCH 2/4] fetcher2 git: unify the nocheckout option format   Yu Ke
• [poky] [PATCH 3/4] fetcher2/git: add document for git fetcher supported options   Yu Ke
• [poky] [PATCH 4/4] fetch2 git: enhance the unpack by using "git checkout"   Yu Ke
• [poky] [PATCH 0/1] Fix rpm rootfs generation   Qing He
• [poky] [PATCH 1/1] rpm: fix fprint pointer issue   Qing He
• [poky] [PATCH 1/1] rpm: fix fprint pointer issue   Richard Purdie
• [poky] [PATCH 1/1] xorg.conf: update keyboard config with evdev   Richard Purdie
• [poky] wrong rpm name qt package   Richard Purdie
• [poky] wrong rpm name qt package   Gerard van den Bosch
• [poky] wrong rpm name qt package   Richard Purdie
• [poky] Weekly Test Report for Yocto 1.1 M1 RC1 - 20110520   Xu, Jiajun
• [poky] wrong rpm name qt package   Gerard van den Bosch
• [poky] [PATCH 0/4] fetcher2 git cleanup   Khem Raj
• [poky] [PATCH 0/4] fetcher2 git cleanup   Richard Purdie
• [poky] [PATCH 0/3] fetch2/git: debug updates and minor cleanup   Richard Purdie
• [poky] Impressions of using Poky to create a BSP   Holger Freyther
• [poky] Impressions of using Poky to create a BSP   Bruce Ashfield
• [poky] Impressions of using Poky to create a BSP   Darren Hart
• [poky] Impressions of using Poky to create a BSP   Chris Larson
• [poky] Impressions of using Poky to create a BSP   Darren Hart
• [poky] Impressions of using Poky to create a BSP   Chris Larson
• [poky] Impressions of using Poky to create a BSP   Khem Raj
• [poky] [PATCH 0/4] fetcher2 git cleanup   Yu Ke
• [poky] Impressions of using Poky to create a BSP   Robert Berger
• [poky] Impressions of using Poky to create a BSP   Bruce Ashfield
• [poky] How to Enable OMAP3 SGX MODULES on BEAGLEBOARD   Koen Kooi
• [poky] [PATCH 0/1]sudo.inc:Add directory "/var/lib" to sudo.inc in the stage of do_install_prepend   Xiaofeng Yan
• [poky] [PATCH 1/1] sudo.inc: Add do_install_prepend () to sudo.inc   Xiaofeng Yan
• [poky] [PATCH 0/1] task-core-lsb: add cups and ghostscript into lsb image   Kang Kai
• [poky] [PATCH 1/1] task-core-lsb: add cups and ghostscript into image   Kang Kai
• [poky] [PATCH 3/4][Image Creator]Introduce new param caches_array into Cache impl.   Ke, Liping
• [poky] [PATCH 0/4][Image Creator]Add mulitple extra cache fields request support   Ke Liping
• [poky] [PATCH 1/4][Image Creator]Refactory Current Cache implementation   Ke Liping
• [poky] [PATCH 2/4][Image Creator]Introduce extra cache class for image creator   Ke Liping
• [poky] [PATCH 3/4][Image Creator]Introduce new param caches_array into Cache impl.   Ke Liping
• [poky] [PATCH 4/4][Image Creator]Implement multiple extra cache fields request support   Ke Liping
• [poky] Error in pulling dbus for beagleboard poky build   chinmaya hoshing
• [poky] Error in pulling dbus for beagleboard poky build   Darren Hart
• [poky] How to Enable OMAP3 SGX MODULES on BEAGLEBOARD   Darren Hart
• [poky] Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528   Xu, Jiajun
• [poky] [PATCH 0/1] bitbake: use layer priority when applying bbappends   Paul Eggleton
• [poky] [PATCH 1/1] bitbake: use layer priority when applying bbappends   Paul Eggleton
• [poky] [PATCH 0/7] User/group creation at preinstall   Scott Garman
• [poky] [PATCH 1/7] shadow: recipe and patch cleanup   Scott Garman
• [poky] [PATCH 2/7] shadow: add a -native recipe with customized utilities   Scott Garman
• [poky] [PATCH 3/7] base-passwd: add -cross recipe with default login.defs   Scott Garman
• [poky] [PATCH 4/7] useradd.bbclass: new class for managing user/group permissions   Scott Garman
• [poky] [PATCH 5/7] useradd-example: example recipe for using inherit useradd   Scott Garman
• [poky] [PATCH 6/7] bitbake.conf: set PSEUDO_PASSWD within FAKEROOTENV   Scott Garman
• [poky] [PATCH 7/7] package_rpm.bbclass: make RPM use on-disk permissions   Scott Garman
• [poky] [PATCH 0/7] User/group creation at preinstall   Koen Kooi
• [poky] [PATCH 0/7] User/group creation at preinstall   Saul Wold
• [poky] [PATCH 5/7] useradd-example: example recipe for using inherit useradd   Mark Hatle
• [poky] [PATCH 0/7] User/group creation at preinstall   Mark Hatle
• [poky] [PATCH 0/7] User/group creation at preinstall   Scott Garman
• [poky] [OE-core] [PATCH 0/7] User/group creation at preinstall   Mark Hatle
• [poky] [OE-core] [PATCH 0/7] User/group creation at preinstall   Richard Purdie
• [poky] [yocto] Weekly Test Report for Yocto 1.1 M1 RC2 - 20110528   Darren Hart
• [poky] [PATCH 0/1]ghostscript: add patches to make it run cross compile platform V2   Saul Wold
• [poky] [PATCH 0/1]ghostscript: add patches to make it run cross compile platform V2   Kang Kai

Last message date: Tue May 31 23:48:40 PDT 2011
Archived on: Sat Nov 16 16:46:43 PST 2013

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...