[poky] [PATCH 2/4] linux-2.6.23: remove the linux-2.6.23 recipe
Darren Hart
dvhart at linux.intel.com
Fri Feb 18 16:46:03 PST 2011
From: Darren Hart <dvhart at linux.intel.com>
The machines supported by this recipe were either recently removed or simply
not defined.
Signed-off-by: Darren Hart <dvhart at linux.intel.com>
---
...x-gcc-4.3-false-modulo-optimization.patch.patch | 48 -
.../linux/linux-2.6.23/binutils-buildid-arm.patch | 16 -
.../linux-2.6.23/cm-x270/0001-cm-x270-base2.patch | 2851 -----
.../cm-x270/0002-cm-x270-match-type.patch | 25 -
.../linux-2.6.23/cm-x270/0003-cm-x270-ide.patch | 186 -
.../linux-2.6.23/cm-x270/0004-cm-x270-it8152.patch | 496 -
.../linux-2.6.23/cm-x270/0005-cm-x270-pcmcia.patch | 228 -
.../linux-2.6.23/cm-x270/0006-ramdisk_load.patch | 80 -
.../cm-x270/0007-mmcsd_large_cards-r0.patch | 36 -
.../cm-x270/0008-cm-x270-nand-simplify-name.patch | 25 -
.../linux/linux-2.6.23/cm-x270/16bpp.patch | 13 -
.../linux/linux-2.6.23/cm-x270/defconfig | 1204 --
.../linux/linux-2.6.23/em-x270/defconfig | 1354 ---
.../em-x270/em-x270-battery-sysfs-fix.patch | 40 -
.../linux/linux-2.6.23/em-x270/em-x270.patch |12063 --------------------
meta/recipes-kernel/linux/linux_2.6.23.bb | 83 -
16 files changed, 0 insertions(+), 18748 deletions(-)
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/1300-fix-gcc-4.3-false-modulo-optimization.patch.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/binutils-buildid-arm.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0001-cm-x270-base2.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0002-cm-x270-match-type.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0003-cm-x270-ide.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0004-cm-x270-it8152.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0005-cm-x270-pcmcia.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0006-ramdisk_load.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0007-mmcsd_large_cards-r0.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0008-cm-x270-nand-simplify-name.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/cm-x270/16bpp.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/cm-x270/defconfig
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/em-x270/defconfig
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/em-x270/em-x270-battery-sysfs-fix.patch
delete mode 100644 meta/recipes-kernel/linux/linux-2.6.23/em-x270/em-x270.patch
delete mode 100644 meta/recipes-kernel/linux/linux_2.6.23.bb
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/1300-fix-gcc-4.3-false-modulo-optimization.patch.patch b/meta/recipes-kernel/linux/linux-2.6.23/1300-fix-gcc-4.3-false-modulo-optimization.patch.patch
deleted file mode 100644
index 3ff0c07..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/1300-fix-gcc-4.3-false-modulo-optimization.patch.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From f5b973489beb1a1239dfad53e3ad6e36ff7ee958 Mon Sep 17 00:00:00 2001
-From: Segher Boessenkool <segher at kernel.crashing.org>
-Date: Thu, 9 Oct 2008 21:18:27 +0100
-Subject: [PATCH] fix-gcc-4.3-false-modulo-optimization.patch
-
-I tried to compile the current stable kernel
-(a2ef813d2f439a3e9f377d33a2e5baad098afb7e)
-and get the following errors:
-
-kernel/built-in.o: In function `timespec_add_ns':
-/mnt/data/Freerunner/Gentoo/rootinstall/usr/src/linux/include/linux/time.h:174:
-undefined reference to `__aeabi_uldivmod'
-/mnt/data/Freerunner/Gentoo/rootinstall/usr/src/linux/include/linux/time.h:179:
-undefined reference to `__aeabi_uldivmod'
-/mnt/data/Freerunner/Gentoo/rootinstall/usr/src/linux/include/linux/time.h:174:
-undefined reference to `__aeabi_uldivmod'
-/mnt/data/Freerunner/Gentoo/rootinstall/usr/src/linux/include/linux/time.h:179:
-undefined reference to `__aeabi_uldivmod'
-
-applying the following patch solved the problem:
---------
-Prevent gcc-4.3 form "optimizing" the while loop into a costly modulo operation.
-Patch found at http://lkml.org/lkml/2008/2/22/464.
-
-Reported-by: Sven Rebhan <odinshorse at googlemail.com>
-Signed-off-by: Segher Boessenkool <segher at kernel.crashing.org>
----
- include/linux/time.h | 4 ++++
- 1 files changed, 4 insertions(+), 0 deletions(-)
-
-diff --git a/include/linux/time.h b/include/linux/time.h
-index b04136d..3e8fd9e 100644
---- a/include/linux/time.h
-+++ b/include/linux/time.h
-@@ -173,6 +173,10 @@ static inline void timespec_add_ns(struct timespec *a, u64 ns)
- {
- ns += a->tv_nsec;
- while(unlikely(ns >= NSEC_PER_SEC)) {
-+ /* The following asm() prevents the compiler from
-+ * optimising this loop into a modulo operation. */
-+ asm("" : "+r"(ns));
-+
- ns -= NSEC_PER_SEC;
- a->tv_sec++;
- }
---
-1.5.6.5
-
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/binutils-buildid-arm.patch b/meta/recipes-kernel/linux/linux-2.6.23/binutils-buildid-arm.patch
deleted file mode 100644
index 68e35e8..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/binutils-buildid-arm.patch
+++ /dev/null
@@ -1,16 +0,0 @@
----
- arch/arm/kernel/vmlinux.lds.S | 1 +
- 1 file changed, 1 insertion(+)
-
-Index: linux-2.6.22/arch/arm/kernel/vmlinux.lds.S
-===================================================================
---- linux-2.6.22.orig/arch/arm/kernel/vmlinux.lds.S 2007-09-11 18:32:29.000000000 +0200
-+++ linux-2.6.22/arch/arm/kernel/vmlinux.lds.S 2007-09-11 18:33:42.000000000 +0200
-@@ -94,6 +94,7 @@
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
-+ *(.note.*)
- #ifdef CONFIG_MMU
- *(.fixup)
- #endif
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0001-cm-x270-base2.patch b/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0001-cm-x270-base2.patch
deleted file mode 100644
index dc68ce9..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0001-cm-x270-base2.patch
+++ /dev/null
@@ -1,2851 +0,0 @@
-From 299199b0cf17d0247a58af6ccd6cf6b859c60e9a Mon Sep 17 00:00:00 2001
-From: Cliff Brake <cbrake at happy.dev.bec-systems.com>
-Date: Fri, 20 Jul 2007 18:55:59 -0400
-Subject: [PATCH] cm-x270-base2
-
----
- arch/arm/Kconfig | 8 +-
- arch/arm/configs/cm_x270_defconfig | 1567 +++++++++++++++++++++++++++++++++++
- arch/arm/mach-pxa/Kconfig | 6 +
- arch/arm/mach-pxa/Makefile | 7 +
- arch/arm/mach-pxa/cm-x270.c | 821 ++++++++++++++++++
- drivers/leds/Kconfig | 6 +
- drivers/leds/Makefile | 1 +
- drivers/leds/leds-cm-x270.c | 126 +++
- drivers/net/Kconfig | 8 +
- drivers/net/dm9000.c | 6 +
- include/asm-arm/arch-pxa/cm-x270.h | 71 ++
- include/asm-arm/arch-pxa/hardware.h | 11 +
- include/asm-arm/arch-pxa/irqs.h | 20 +
- include/asm-arm/memory.h | 10 +
- 14 files changed, 2667 insertions(+), 1 deletions(-)
- create mode 100644 arch/arm/configs/cm_x270_defconfig
- create mode 100644 arch/arm/mach-pxa/cm-x270.c
- create mode 100644 drivers/leds/leds-cm-x270.c
- create mode 100644 include/asm-arm/arch-pxa/cm-x270.h
-
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index 691aae3..b9a2b11 100644
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -534,7 +534,7 @@ config ISA_DMA_API
- bool
-
- config PCI
-- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
-+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
-@@ -555,6 +555,12 @@ config PCI_HOST_VIA82C505
- depends on PCI && ARCH_SHARK
- default y
-
-+config PCI_HOST_ITE8152
-+ bool
-+ depends on PCI && MACH_ARMCORE
-+ default y
-+ select DMABOUNCE
-+
- source "drivers/pci/Kconfig"
-
- source "drivers/pcmcia/Kconfig"
-diff --git a/arch/arm/configs/cm_x270_defconfig b/arch/arm/configs/cm_x270_defconfig
-new file mode 100644
-index 0000000..f728363
---- /dev/null
-+++ b/arch/arm/configs/cm_x270_defconfig
-@@ -0,0 +1,1567 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.21-rc4
-+# Wed Apr 4 16:42:03 2007
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_ARCH_MTD_XIP=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+# CONFIG_AUDIT is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SHMEM=y
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+# CONFIG_SLOB is not set
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+CONFIG_DEFAULT_AS=y
-+# CONFIG_DEFAULT_DEADLINE is not set
-+# CONFIG_DEFAULT_CFQ is not set
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="anticipatory"
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+# CONFIG_ARCH_AT91 is not set
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+CONFIG_ARCH_PXA=y
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_OMAP is not set
-+CONFIG_DMABOUNCE=y
-+
-+#
-+# Intel PXA2xx Implementations
-+#
-+# CONFIG_ARCH_LUBBOCK is not set
-+# CONFIG_MACH_LOGICPD_PXA270 is not set
-+# CONFIG_MACH_MAINSTONE is not set
-+# CONFIG_ARCH_PXA_IDP is not set
-+# CONFIG_PXA_SHARPSL is not set
-+# CONFIG_MACH_TRIZEPS4 is not set
-+CONFIG_MACH_ARMCORE=y
-+CONFIG_PXA27x=y
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_XSCALE=y
-+CONFIG_CPU_32v5=y
-+CONFIG_CPU_ABRT_EV5T=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_OUTER_CACHE is not set
-+CONFIG_IWMMXT=y
-+CONFIG_XSCALE_PMU=y
-+
-+#
-+# Bus support
-+#
-+CONFIG_PCI=y
-+CONFIG_PCI_HOST_ITE8152=y
-+# CONFIG_PCI_DEBUG is not set
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+CONFIG_PCCARD=y
-+# CONFIG_PCMCIA_DEBUG is not set
-+CONFIG_PCMCIA=m
-+# CONFIG_PCMCIA_LOAD_CIS is not set
-+CONFIG_PCMCIA_IOCTL=y
-+CONFIG_CARDBUS=y
-+
-+#
-+# PC-card bridges
-+#
-+# CONFIG_YENTA is not set
-+# CONFIG_PD6729 is not set
-+# CONFIG_I82092 is not set
-+CONFIG_PCMCIA_PXA2XX=m
-+
-+#
-+# Kernel Features
-+#
-+# CONFIG_PREEMPT is not set
-+# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE=""
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+# CONFIG_ARTHUR is not set
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_LEGACY is not set
-+# CONFIG_PM_DEBUG is not set
-+# CONFIG_PM_SYSFS_DEPRECATED is not set
-+# CONFIG_APM_EMULATION is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+CONFIG_IP_PNP_BOOTP=y
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+CONFIG_IEEE80211=m
-+# CONFIG_IEEE80211_DEBUG is not set
-+CONFIG_IEEE80211_CRYPT_WEP=m
-+CONFIG_IEEE80211_CRYPT_CCMP=m
-+# CONFIG_IEEE80211_CRYPT_TKIP is not set
-+# CONFIG_IEEE80211_SOFTMAC is not set
-+CONFIG_WIRELESS_EXT=y
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+CONFIG_MTD=m
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=m
-+CONFIG_MTD_BLKDEVS=m
-+CONFIG_MTD_BLOCK=m
-+# CONFIG_MTD_BLOCK_RO is not set
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_SHARP_SL is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_PMC551 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+CONFIG_MTD_NAND=m
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_H1900 is not set
-+CONFIG_MTD_NAND_IDS=m
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+# CONFIG_MTD_NAND_SHARPSL is not set
-+# CONFIG_MTD_NAND_CAFE is not set
-+CONFIG_MTD_NAND_CM_X270=m
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+# CONFIG_PNPACPI is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_CPQ_DA is not set
-+# CONFIG_BLK_CPQ_CISS_DA is not set
-+# CONFIG_BLK_DEV_DAC960 is not set
-+# CONFIG_BLK_DEV_UMEM is not set
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_SX8 is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=12000
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# ATA/ATAPI/MFM/RLL support
-+#
-+CONFIG_IDE=m
-+CONFIG_IDE_MAX_HWIFS=4
-+CONFIG_BLK_DEV_IDE=m
-+
-+#
-+# Please see Documentation/ide.txt for help/info on IDE drives
-+#
-+# CONFIG_BLK_DEV_IDE_SATA is not set
-+CONFIG_BLK_DEV_IDEDISK=m
-+# CONFIG_IDEDISK_MULTI_MODE is not set
-+CONFIG_BLK_DEV_IDECS=m
-+# CONFIG_BLK_DEV_DELKIN is not set
-+CONFIG_BLK_DEV_IDECD=m
-+# CONFIG_BLK_DEV_IDETAPE is not set
-+# CONFIG_BLK_DEV_IDEFLOPPY is not set
-+# CONFIG_BLK_DEV_IDESCSI is not set
-+# CONFIG_IDE_TASK_IOCTL is not set
-+
-+#
-+# IDE chipset support/bugfixes
-+#
-+# CONFIG_IDE_GENERIC is not set
-+# CONFIG_BLK_DEV_IDEPCI is not set
-+# CONFIG_IDE_ARM is not set
-+CONFIG_BLK_DEV_IDE_CM_X270=m
-+# CONFIG_BLK_DEV_IDEDMA is not set
-+# CONFIG_BLK_DEV_HD is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+# CONFIG_SCSI_PROC_FS is not set
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+
-+#
-+# SCSI low-level drivers
-+#
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-+# CONFIG_SCSI_3W_9XXX is not set
-+# CONFIG_SCSI_ACARD is not set
-+# CONFIG_SCSI_AACRAID is not set
-+# CONFIG_SCSI_AIC7XXX is not set
-+# CONFIG_SCSI_AIC7XXX_OLD is not set
-+# CONFIG_SCSI_AIC79XX is not set
-+# CONFIG_SCSI_AIC94XX is not set
-+# CONFIG_SCSI_DPT_I2O is not set
-+# CONFIG_SCSI_ARCMSR is not set
-+# CONFIG_MEGARAID_NEWGEN is not set
-+# CONFIG_MEGARAID_LEGACY is not set
-+# CONFIG_MEGARAID_SAS is not set
-+# CONFIG_SCSI_HPTIOP is not set
-+# CONFIG_SCSI_DMX3191D is not set
-+# CONFIG_SCSI_FUTURE_DOMAIN is not set
-+# CONFIG_SCSI_IPS is not set
-+# CONFIG_SCSI_INITIO is not set
-+# CONFIG_SCSI_INIA100 is not set
-+# CONFIG_SCSI_STEX is not set
-+# CONFIG_SCSI_SYM53C8XX_2 is not set
-+# CONFIG_SCSI_QLOGIC_1280 is not set
-+# CONFIG_SCSI_QLA_FC is not set
-+# CONFIG_SCSI_QLA_ISCSI is not set
-+# CONFIG_SCSI_LPFC is not set
-+# CONFIG_SCSI_DC395x is not set
-+# CONFIG_SCSI_DC390T is not set
-+# CONFIG_SCSI_NSP32 is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_SRP is not set
-+
-+#
-+# PCMCIA SCSI adapter support
-+#
-+# CONFIG_PCMCIA_AHA152X is not set
-+# CONFIG_PCMCIA_FDOMAIN is not set
-+# CONFIG_PCMCIA_NINJA_SCSI is not set
-+# CONFIG_PCMCIA_QLOGIC is not set
-+# CONFIG_PCMCIA_SYM53C500 is not set
-+
-+#
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+# CONFIG_FUSION_SPI is not set
-+# CONFIG_FUSION_FC is not set
-+# CONFIG_FUSION_SAS is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+# CONFIG_IEEE1394 is not set
-+
-+#
-+# I2O device support
-+#
-+# CONFIG_I2O is not set
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+
-+#
-+# ARCnet devices
-+#
-+# CONFIG_ARCNET is not set
-+
-+#
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_HAPPYMEAL is not set
-+# CONFIG_SUNGEM is not set
-+# CONFIG_CASSINI is not set
-+# CONFIG_NET_VENDOR_3COM is not set
-+# CONFIG_SMC91X is not set
-+CONFIG_DM9000=y
-+CONFIG_DM9000_NOEPROM=y
-+# CONFIG_SMC911X is not set
-+
-+#
-+# Tulip family network device support
-+#
-+# CONFIG_NET_TULIP is not set
-+# CONFIG_HP100 is not set
-+CONFIG_NET_PCI=y
-+# CONFIG_PCNET32 is not set
-+# CONFIG_AMD8111_ETH is not set
-+# CONFIG_ADAPTEC_STARFIRE is not set
-+# CONFIG_B44 is not set
-+# CONFIG_FORCEDETH is not set
-+# CONFIG_DGRS is not set
-+# CONFIG_EEPRO100 is not set
-+# CONFIG_E100 is not set
-+# CONFIG_FEALNX is not set
-+# CONFIG_NATSEMI is not set
-+# CONFIG_NE2K_PCI is not set
-+# CONFIG_8139CP is not set
-+CONFIG_8139TOO=m
-+# CONFIG_8139TOO_PIO is not set
-+# CONFIG_8139TOO_TUNE_TWISTER is not set
-+# CONFIG_8139TOO_8129 is not set
-+# CONFIG_8139_OLD_RX_RESET is not set
-+# CONFIG_SIS900 is not set
-+# CONFIG_EPIC100 is not set
-+# CONFIG_SUNDANCE is not set
-+# CONFIG_TLAN is not set
-+# CONFIG_VIA_RHINE is not set
-+# CONFIG_SC92031 is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+# CONFIG_ACENIC is not set
-+# CONFIG_DL2K is not set
-+# CONFIG_E1000 is not set
-+# CONFIG_NS83820 is not set
-+# CONFIG_HAMACHI is not set
-+# CONFIG_YELLOWFIN is not set
-+# CONFIG_R8169 is not set
-+# CONFIG_SIS190 is not set
-+# CONFIG_SKGE is not set
-+# CONFIG_SKY2 is not set
-+# CONFIG_SK98LIN is not set
-+# CONFIG_VIA_VELOCITY is not set
-+# CONFIG_TIGON3 is not set
-+# CONFIG_BNX2 is not set
-+# CONFIG_QLA3XXX is not set
-+# CONFIG_ATL1 is not set
-+
-+#
-+# Ethernet (10000 Mbit)
-+#
-+# CONFIG_CHELSIO_T1 is not set
-+# CONFIG_CHELSIO_T3 is not set
-+# CONFIG_IXGB is not set
-+# CONFIG_S2IO is not set
-+# CONFIG_MYRI10GE is not set
-+# CONFIG_NETXEN_NIC is not set
-+
-+#
-+# Token Ring devices
-+#
-+# CONFIG_TR is not set
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+CONFIG_NET_RADIO=y
-+# CONFIG_NET_WIRELESS_RTNETLINK is not set
-+
-+#
-+# Obsolete Wireless cards support (pre-802.11)
-+#
-+# CONFIG_STRIP is not set
-+# CONFIG_PCMCIA_WAVELAN is not set
-+# CONFIG_PCMCIA_NETWAVE is not set
-+
-+#
-+# Wireless 802.11 Frequency Hopping cards support
-+#
-+# CONFIG_PCMCIA_RAYCS is not set
-+
-+#
-+# Wireless 802.11b ISA/PCI cards support
-+#
-+# CONFIG_IPW2100 is not set
-+# CONFIG_IPW2200 is not set
-+# CONFIG_HERMES is not set
-+# CONFIG_ATMEL is not set
-+
-+#
-+# Wireless 802.11b Pcmcia/Cardbus cards support
-+#
-+# CONFIG_AIRO_CS is not set
-+# CONFIG_PCMCIA_WL3501 is not set
-+
-+#
-+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-+#
-+# CONFIG_PRISM54 is not set
-+# CONFIG_USB_ZD1201 is not set
-+# CONFIG_HOSTAP is not set
-+CONFIG_NET_WIRELESS=y
-+
-+#
-+# PCMCIA network device support
-+#
-+CONFIG_NET_PCMCIA=y
-+# CONFIG_PCMCIA_3C589 is not set
-+# CONFIG_PCMCIA_3C574 is not set
-+# CONFIG_PCMCIA_FMVJ18X is not set
-+CONFIG_PCMCIA_PCNET=m
-+# CONFIG_PCMCIA_NMCLAN is not set
-+# CONFIG_PCMCIA_SMC91C92 is not set
-+# CONFIG_PCMCIA_XIRC2PS is not set
-+# CONFIG_PCMCIA_AXNET is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+# CONFIG_FDDI is not set
-+# CONFIG_HIPPI is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NET_FC is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+
-+#
-+# Userland interfaces
-+#
-+# CONFIG_INPUT_MOUSEDEV is not set
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+CONFIG_TOUCHSCREEN_UCB1400=m
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_PXA=y
-+CONFIG_SERIAL_PXA_CONSOLE=y
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+# CONFIG_SERIAL_JSM is not set
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=256
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+
-+#
-+# Watchdog Cards
-+#
-+# CONFIG_WATCHDOG is not set
-+CONFIG_HW_RANDOM=m
-+# CONFIG_NVRAM is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_APPLICOM is not set
-+# CONFIG_DRM is not set
-+
-+#
-+# PCMCIA character devices
-+#
-+# CONFIG_SYNCLINK_CS is not set
-+# CONFIG_CARDMAN_4000 is not set
-+# CONFIG_CARDMAN_4040 is not set
-+# CONFIG_RAW_DRIVER is not set
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+
-+#
-+# I2C support
-+#
-+# CONFIG_I2C is not set
-+
-+#
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+# CONFIG_HWMON is not set
-+# CONFIG_HWMON_VID is not set
-+
-+#
-+# Misc devices
-+#
-+# CONFIG_SGI_IOC4 is not set
-+# CONFIG_TIFM_CORE is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# LED devices
-+#
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=y
-+
-+#
-+# LED drivers
-+#
-+CONFIG_LEDS_CM_X270=y
-+
-+#
-+# LED Triggers
-+#
-+CONFIG_LEDS_TRIGGERS=y
-+# CONFIG_LEDS_TRIGGER_TIMER is not set
-+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Digital Video Broadcasting Devices
-+#
-+# CONFIG_DVB is not set
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frambuffer hardware drivers
-+#
-+# CONFIG_FB_CIRRUS is not set
-+# CONFIG_FB_PM2 is not set
-+# CONFIG_FB_CYBER2000 is not set
-+# CONFIG_FB_ASILIANT is not set
-+# CONFIG_FB_IMSTT is not set
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_NVIDIA is not set
-+# CONFIG_FB_RIVA is not set
-+# CONFIG_FB_MATROX is not set
-+# CONFIG_FB_RADEON is not set
-+# CONFIG_FB_ATY128 is not set
-+# CONFIG_FB_ATY is not set
-+# CONFIG_FB_S3 is not set
-+# CONFIG_FB_SAVAGE is not set
-+# CONFIG_FB_SIS is not set
-+# CONFIG_FB_NEOMAGIC is not set
-+# CONFIG_FB_KYRO is not set
-+# CONFIG_FB_3DFX is not set
-+# CONFIG_FB_VOODOO1 is not set
-+# CONFIG_FB_TRIDENT is not set
-+CONFIG_FB_PXA=y
-+# CONFIG_FB_PXA_PARAMETERS is not set
-+CONFIG_FB_MBX=m
-+# CONFIG_FB_VIRTUAL is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-+# CONFIG_FONTS is not set
-+CONFIG_FONT_8x8=y
-+CONFIG_FONT_8x16=y
-+
-+#
-+# Logo configuration
-+#
-+CONFIG_LOGO=y
-+CONFIG_LOGO_LINUX_MONO=y
-+CONFIG_LOGO_LINUX_VGA16=y
-+CONFIG_LOGO_LINUX_CLUT224=y
-+
-+#
-+# Sound
-+#
-+CONFIG_SOUND=m
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+CONFIG_SND_SUPPORT_OLD_API=y
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+
-+#
-+# Generic devices
-+#
-+CONFIG_SND_AC97_CODEC=m
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+
-+#
-+# PCI devices
-+#
-+# CONFIG_SND_AD1889 is not set
-+# CONFIG_SND_ALS300 is not set
-+# CONFIG_SND_ALI5451 is not set
-+# CONFIG_SND_ATIIXP is not set
-+# CONFIG_SND_ATIIXP_MODEM is not set
-+# CONFIG_SND_AU8810 is not set
-+# CONFIG_SND_AU8820 is not set
-+# CONFIG_SND_AU8830 is not set
-+# CONFIG_SND_AZT3328 is not set
-+# CONFIG_SND_BT87X is not set
-+# CONFIG_SND_CA0106 is not set
-+# CONFIG_SND_CMIPCI is not set
-+# CONFIG_SND_CS4281 is not set
-+# CONFIG_SND_CS46XX is not set
-+# CONFIG_SND_DARLA20 is not set
-+# CONFIG_SND_GINA20 is not set
-+# CONFIG_SND_LAYLA20 is not set
-+# CONFIG_SND_DARLA24 is not set
-+# CONFIG_SND_GINA24 is not set
-+# CONFIG_SND_LAYLA24 is not set
-+# CONFIG_SND_MONA is not set
-+# CONFIG_SND_MIA is not set
-+# CONFIG_SND_ECHO3G is not set
-+# CONFIG_SND_INDIGO is not set
-+# CONFIG_SND_INDIGOIO is not set
-+# CONFIG_SND_INDIGODJ is not set
-+# CONFIG_SND_EMU10K1 is not set
-+# CONFIG_SND_EMU10K1X is not set
-+# CONFIG_SND_ENS1370 is not set
-+# CONFIG_SND_ENS1371 is not set
-+# CONFIG_SND_ES1938 is not set
-+# CONFIG_SND_ES1968 is not set
-+# CONFIG_SND_FM801 is not set
-+# CONFIG_SND_HDA_INTEL is not set
-+# CONFIG_SND_HDSP is not set
-+# CONFIG_SND_HDSPM is not set
-+# CONFIG_SND_ICE1712 is not set
-+# CONFIG_SND_ICE1724 is not set
-+# CONFIG_SND_INTEL8X0 is not set
-+# CONFIG_SND_INTEL8X0M is not set
-+# CONFIG_SND_KORG1212 is not set
-+# CONFIG_SND_MAESTRO3 is not set
-+# CONFIG_SND_MIXART is not set
-+# CONFIG_SND_NM256 is not set
-+# CONFIG_SND_PCXHR is not set
-+# CONFIG_SND_RIPTIDE is not set
-+# CONFIG_SND_RME32 is not set
-+# CONFIG_SND_RME96 is not set
-+# CONFIG_SND_RME9652 is not set
-+# CONFIG_SND_SONICVIBES is not set
-+# CONFIG_SND_TRIDENT is not set
-+# CONFIG_SND_VIA82XX is not set
-+# CONFIG_SND_VIA82XX_MODEM is not set
-+# CONFIG_SND_VX222 is not set
-+# CONFIG_SND_YMFPCI is not set
-+# CONFIG_SND_AC97_POWER_SAVE is not set
-+
-+#
-+# ALSA ARM devices
-+#
-+CONFIG_SND_PXA2XX_PCM=m
-+CONFIG_SND_PXA2XX_AC97=m
-+
-+#
-+# USB devices
-+#
-+# CONFIG_SND_USB_AUDIO is not set
-+
-+#
-+# PCMCIA devices
-+#
-+# CONFIG_SND_VXPOCKET is not set
-+# CONFIG_SND_PDAUDIOCF is not set
-+
-+#
-+# SoC audio support
-+#
-+# CONFIG_SND_SOC is not set
-+
-+#
-+# Open Sound System
-+#
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_AC97_BUS=m
-+
-+#
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
-+# USB support
-+#
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_SUSPEND is not set
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_EHCI_HCD is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_UHCI_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
-+# CONFIG_USB_AIPTEK is not set
-+# CONFIG_USB_WACOM is not set
-+# CONFIG_USB_ACECAD is not set
-+# CONFIG_USB_KBTAB is not set
-+# CONFIG_USB_POWERMATE is not set
-+# CONFIG_USB_TOUCHSCREEN is not set
-+# CONFIG_USB_YEALINK is not set
-+# CONFIG_USB_XPAD is not set
-+# CONFIG_USB_ATI_REMOTE is not set
-+# CONFIG_USB_ATI_REMOTE2 is not set
-+# CONFIG_USB_KEYSPAN_REMOTE is not set
-+# CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_GTCO is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET_MII is not set
-+# CONFIG_USB_USBNET is not set
-+CONFIG_USB_MON=y
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# MMC/SD Card support
-+#
-+CONFIG_MMC=m
-+# CONFIG_MMC_DEBUG is not set
-+CONFIG_MMC_BLOCK=m
-+CONFIG_MMC_PXA=m
-+# CONFIG_MMC_SDHCI is not set
-+# CONFIG_MMC_TIFM_SD is not set
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+
-+#
-+# RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+CONFIG_RTC_DRV_SA1100=y
-+# CONFIG_RTC_DRV_TEST is not set
-+CONFIG_RTC_DRV_V3020=y
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+# CONFIG_JFFS2_FS is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+CONFIG_SMB_FS=y
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_LOG_BUF_SHIFT=17
-+# CONFIG_DETECT_SOFTLOCKUP is not set
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+# CONFIG_DEBUG_BUGVERBOSE is not set
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+CONFIG_FRAME_POINTER=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+CONFIG_DEBUG_USER=y
-+CONFIG_DEBUG_ERRORS=y
-+CONFIG_DEBUG_LL=y
-+# CONFIG_DEBUG_ICEDCC is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+
-+#
-+# Cryptographic options
-+#
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=m
-+CONFIG_CRYPTO_BLKCIPHER=m
-+CONFIG_CRYPTO_MANAGER=m
-+# CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+# CONFIG_CRYPTO_MD5 is not set
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+CONFIG_CRYPTO_ECB=m
-+CONFIG_CRYPTO_CBC=m
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_LRW is not set
-+# CONFIG_CRYPTO_DES is not set
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+CONFIG_CRYPTO_AES=m
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+CONFIG_CRYPTO_ARC4=m
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Hardware crypto devices
-+#
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC32=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
-index 5ebec6d..e126926 100644
---- a/arch/arm/mach-pxa/Kconfig
-+++ b/arch/arm/mach-pxa/Kconfig
-@@ -40,6 +40,12 @@ config MACH_TRIZEPS4
- config MACH_EM_X270
- bool "CompuLab EM-x270 platform"
- select PXA27x
-+ select IWMMXT
-+
-+config MACH_ARMCORE
-+ bool "CompuLab CM-X270 modules"
-+ select PXA27x
-+ select IWMMXT
-
- endchoice
-
-diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
-index 7d6ab5c..b369289 100644
---- a/arch/arm/mach-pxa/Makefile
-+++ b/arch/arm/mach-pxa/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
- obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
- obj-$(CONFIG_MACH_TOSA) += tosa.o
- obj-$(CONFIG_MACH_EM_X270) += em-x270.o
-+obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o
-
- # Support for blinky lights
- led-y := leds.o
-@@ -26,6 +27,8 @@ led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
- led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
- led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
- led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
-+# FIXME: use driver/leds instead
-+led-$(CONFIG_MACH_ARMCORE) += leds-cm-x270.o
-
- obj-$(CONFIG_LEDS) += $(led-y)
-
-@@ -36,3 +39,7 @@ obj-$(CONFIG_PXA_SSP) += ssp.o
- ifeq ($(CONFIG_PXA27x),y)
- obj-$(CONFIG_PM) += standby.o
- endif
-+
-+ifeq ($(CONFIG_PCI),y)
-+obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
-+endif
-diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
-new file mode 100644
-index 0000000..7b4e288
---- /dev/null
-+++ b/arch/arm/mach-pxa/cm-x270.c
-@@ -0,0 +1,821 @@
-+/*
-+ * linux/arch/arm/mach-pxa/cm-x270.c
-+ *
-+ * Copyright (C) 2007 CompuLab, Ltd.
-+ * Mike Rapoport <mike at compulab.co.il>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/pm.h>
-+#include <linux/fb.h>
-+#include <linux/platform_device.h>
-+#include <linux/sysdev.h>
-+#include <linux/dm9000.h>
-+#include <linux/rtc-v3020.h>
-+#include <linux/serial_8250.h>
-+#include <video/mbxfb.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/delay.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pxafb.h>
-+#include <asm/arch/ohci.h>
-+#include <asm/arch/mmc.h>
-+#include <asm/arch/bitfield.h>
-+#include <asm/arch/cm-x270.h>
-+
-+#include <asm/hardware/it8152.h>
-+
-+#include "generic.h"
-+
-+#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
-+#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
-+
-+static struct resource cmx270_dm9k_resource[] = {
-+ [0] = {
-+ .start = DM9000_PHYS_BASE,
-+ .end = DM9000_PHYS_BASE + 4,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = DM9000_PHYS_BASE + 8,
-+ .end = DM9000_PHYS_BASE + 8 + 500,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [2] = {
-+ .start = CMX270_ETHIRQ,
-+ .end = CMX270_ETHIRQ,
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+/* for the moment we limit ourselves to 32bit IO until some
-+ * better IO routines can be written and tested
-+ */
-+static struct dm9000_plat_data cmx270_dm9k_platdata = {
-+ .flags = DM9000_PLATF_32BITONLY,
-+};
-+
-+/* Ethernet device */
-+static struct platform_device cmx270_device_dm9k = {
-+ .name = "dm9000",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(cmx270_dm9k_resource),
-+ .resource = cmx270_dm9k_resource,
-+ .dev = {
-+ .platform_data = &cmx270_dm9k_platdata,
-+ }
-+};
-+
-+/* audio device */
-+static struct platform_device cmx270_audio_device = {
-+ .name = "pxa2xx-ac97",
-+ .id = -1,
-+};
-+
-+/* touchscreen controller */
-+static struct platform_device cmx270_ts_device = {
-+ .name = "ucb1x00-ts",
-+ .id = -1,
-+};
-+
-+/* RTC */
-+static struct resource cmx270_v3020_resource[] = {
-+ [0] = {
-+ .start = RTC_PHYS_BASE,
-+ .end = RTC_PHYS_BASE + 4,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+struct v3020_platform_data cmx270_v3020_pdata = {
-+ .leftshift = 16,
-+};
-+
-+static struct platform_device cmx270_rtc_device = {
-+ .name = "v3020",
-+ .num_resources = ARRAY_SIZE(cmx270_v3020_resource),
-+ .resource = cmx270_v3020_resource,
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &cmx270_v3020_pdata,
-+ }
-+};
-+
-+/*
-+ * CM-X270 LEDs
-+ */
-+static struct platform_device cmx270led_device = {
-+ .name = "cm-x270-led",
-+ .id = -1,
-+};
-+
-+/* 2700G graphics */
-+static u64 fb_dma_mask = ~(u64)0;
-+
-+static struct resource cmx270_2700G_resource[] = {
-+ /* frame buffer memory including ODFB and External SDRAM */
-+ [0] = {
-+ .start = MARATHON_PHYS,
-+ .end = MARATHON_PHYS + 0x02000000,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ /* Marathon registers */
-+ [1] = {
-+ .start = MARATHON_PHYS + 0x03fe0000,
-+ .end = MARATHON_PHYS + 0x03ffffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static unsigned long save_lcd_regs[10];
-+
-+static int cmx270_marathon_probe(struct fb_info *fb)
-+{
-+ /* save PXA-270 pin settings before enabling 2700G */
-+ save_lcd_regs[0] = GPDR1;
-+ save_lcd_regs[1] = GPDR2;
-+ save_lcd_regs[2] = GAFR1_U;
-+ save_lcd_regs[3] = GAFR2_L;
-+ save_lcd_regs[4] = GAFR2_U;
-+
-+ /* Disable PXA-270 on-chip controller driving pins */
-+ GPDR1 &= ~(0xfc000000);
-+ GPDR2 &= ~(0x00c03fff);
-+ GAFR1_U &= ~(0xfff00000);
-+ GAFR2_L &= ~(0x0fffffff);
-+ GAFR2_U &= ~(0x0000f000);
-+ return 0;
-+}
-+
-+static int cmx270_marathon_remove(struct fb_info *fb)
-+{
-+ GPDR1 = save_lcd_regs[0];
-+ GPDR2 = save_lcd_regs[1];
-+ GAFR1_U = save_lcd_regs[2];
-+ GAFR2_L = save_lcd_regs[3];
-+ GAFR2_U = save_lcd_regs[4];
-+ return 0;
-+}
-+
-+static struct mbxfb_platform_data cmx270_2700G_data = {
-+ .xres = {
-+ .min = 240,
-+ .max = 1200,
-+ .defval = 640,
-+ },
-+ .yres = {
-+ .min = 240,
-+ .max = 1200,
-+ .defval = 480,
-+ },
-+ .bpp = {
-+ .min = 16,
-+ .max = 32,
-+ .defval = 16,
-+ },
-+ .memsize = 8*1024*1024,
-+ .probe = cmx270_marathon_probe,
-+ .remove = cmx270_marathon_remove,
-+};
-+
-+static struct platform_device cmx270_2700G = {
-+ .name = "mbx-fb",
-+ .dev = {
-+ .platform_data = &cmx270_2700G_data,
-+ .dma_mask = &fb_dma_mask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .num_resources = ARRAY_SIZE(cmx270_2700G_resource),
-+ .resource = cmx270_2700G_resource,
-+ .id = -1,
-+};
-+
-+/* platform devices */
-+static struct platform_device *platform_devices[] __initdata = {
-+ &cmx270_device_dm9k,
-+ &cmx270_audio_device,
-+ &cmx270_rtc_device,
-+ &cmx270_2700G,
-+ &cmx270led_device,
-+};
-+
-+#ifdef CONFIG_PCI
-+/*
-+ * Install handler for IT8152 IRQ. Yes, yes... we are way down the IRQ
-+ * cascade which is not good for IRQ latency, but the hardware has been
-+ * designed that way...
-+ */
-+static inline void cmx270_irq(int irq, struct pt_regs *regs)
-+{
-+ struct irq_desc *desc;
-+ desc = irq_desc + irq;
-+ desc_handle_irq(irq, desc);
-+}
-+
-+static void cmx270_irq_demux(unsigned int irq, struct irqdesc *desc,
-+ struct pt_regs *regs)
-+{
-+ unsigned long pdcnimr, ldcnimr;
-+ int pdcnirr, ldcnir;
-+
-+ /* clear our parent irq */
-+ GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
-+
-+ /* read pending IRQs in the chip registers and clear them */
-+ pdcnirr = IT8152_INTC_PDCNIRR;
-+ ldcnir = IT8152_INTC_LDCNIRR;
-+ IT8152_INTC_PDCNIRR = ~pdcnirr;
-+ IT8152_INTC_LDCNIRR = ~ldcnir;
-+
-+ /* mask ITE irqs */
-+ pdcnimr = IT8152_INTC_PDCNIMR;
-+ ldcnimr = IT8152_INTC_LDCNIMR;
-+ IT8152_INTC_PDCNIMR = 0xffff;
-+ IT8152_INTC_LDCNIMR = 0xffff;
-+
-+ pdcnirr &= (PCISERR_BIT | H2PTADR_BIT | H2PMAR_BIT |
-+ PCI_INTD_BIT | PCI_INTC_BIT | PCI_INTB_BIT | PCI_INTA_BIT |
-+ USB_INT_BIT | CDMA_INT_BIT);
-+
-+ ldcnir &= ITESER_BIT;
-+
-+ IT8152_INTC_PDCNIRR = ~pdcnirr;
-+ IT8152_INTC_LDCNIRR = ~ldcnir;
-+
-+ /* are there interrupts pending ? */
-+ if( (pdcnirr | ldcnir) ) {
-+ if (pdcnirr) {
-+ if( pdcnirr & PCISERR_BIT )
-+ cmx270_irq(PCISERR, regs);
-+ if( pdcnirr & H2PTADR_BIT )
-+ cmx270_irq(H2PTADR, regs);
-+ if( pdcnirr & H2PMAR_BIT )
-+ cmx270_irq(H2PMAR, regs);
-+ if( pdcnirr & PCI_INTA_BIT )
-+ cmx270_irq(PCI_INTA, regs);
-+ if( pdcnirr & PCI_INTB_BIT )
-+ cmx270_irq(PCI_INTB, regs);
-+ if( pdcnirr & PCI_INTC_BIT )
-+ cmx270_irq(PCI_INTC, regs);
-+ if( pdcnirr & PCI_INTD_BIT )
-+ cmx270_irq(PCI_INTD, regs);
-+ if( pdcnirr & USB_INT_BIT )
-+ cmx270_irq(USB_INT, regs);
-+ if( pdcnirr & CDMA_INT_BIT )
-+ cmx270_irq(CDMA_INT, regs);
-+ }
-+ if(ldcnir) {
-+ if( ldcnir & ITESER_BIT )
-+ cmx270_irq(IRQ_ITESER, regs);
-+ }
-+ }
-+
-+ /* re-enable ITE interrupts */
-+ IT8152_INTC_PDCNIMR = pdcnimr;
-+ IT8152_INTC_LDCNIMR = ldcnimr;
-+}
-+#else
-+unsigned long it8152_base_address = CMX270_IT8152_VIRT;
-+#endif
-+
-+/* #define CMX270_FLASH_VIRT (CMX270_IDE104_VIRT + PXA_CS_SIZE - (8<<20)) */
-+/* Map PCI companion and IDE/General Purpose CS statically */
-+static struct map_desc cmx270_io_desc[] __initdata = {
-+ [0] = { /* IDE/general purpose space */
-+ .virtual = CMX270_IDE104_VIRT,
-+ .pfn = __phys_to_pfn(CMX270_IDE104_PHYS),
-+ .length = PXA_CS_SIZE - (8<<20),
-+ .type = MT_DEVICE
-+ },
-+ [1] = { /* PCI bridge */
-+ .virtual = CMX270_IT8152_VIRT,
-+ .pfn = __phys_to_pfn(CMX270_IT8152_PHYS),
-+ .length = PXA_CS_SIZE,
-+ .type = MT_DEVICE
-+ },
-+};
-+
-+/*
-+ Display definitions
-+ keep these for backwards compatibility, although symbolic names (as
-+ e.g. in lpd270.c) looks better
-+ */
-+#define MTYPE_STN320x240 0
-+#define MTYPE_TFT640x480 1
-+#define MTYPE_CRT640x480 2
-+#define MTYPE_CRT800x600 3
-+#define MTYPE_TFT320x240 6
-+#define MTYPE_STN640x480 7
-+
-+static struct pxafb_mode_info generic_stn_320x240_mode = {
-+ .pixclock = 76923,
-+ .bpp = 8,
-+ .xres = 320,
-+ .yres = 240,
-+ .hsync_len = 3,
-+ .vsync_len = 2,
-+ .left_margin = 3,
-+ .upper_margin = 0,
-+ .right_margin = 3,
-+ .lower_margin = 0,
-+ .sync = (FB_SYNC_HOR_HIGH_ACT |
-+ FB_SYNC_VERT_HIGH_ACT),
-+ .cmap_greyscale = 0,
-+};
-+
-+static struct pxafb_mach_info generic_stn_320x240 = {
-+ .modes = &generic_stn_320x240_mode,
-+ .num_modes = 1,
-+ .lccr0 = 0,
-+ .lccr3 = (LCCR3_PixClkDiv(0x03) |
-+ LCCR3_Acb(0xff) |
-+ LCCR3_PCP),
-+ .cmap_inverse = 0,
-+ .cmap_static = 0,
-+};
-+
-+static struct pxafb_mode_info generic_tft_640x480_mode = {
-+ .pixclock = 38461,
-+ .bpp = 8,
-+ .xres = 640,
-+ .yres = 480,
-+ .hsync_len = 60,
-+ .vsync_len = 2,
-+ .left_margin = 70,
-+ .upper_margin = 10,
-+ .right_margin = 70,
-+ .lower_margin = 5,
-+ .sync = 0,
-+ .cmap_greyscale = 0,
-+};
-+
-+static struct pxafb_mach_info generic_tft_640x480 = {
-+ .modes = &generic_tft_640x480_mode,
-+ .num_modes = 1,
-+ .lccr0 = (LCCR0_PAS),
-+ .lccr3 = (LCCR3_PixClkDiv(0x01) |
-+ LCCR3_Acb(0xff) |
-+ LCCR3_PCP),
-+ .cmap_inverse = 0,
-+ .cmap_static = 0,
-+};
-+
-+static struct pxafb_mode_info generic_crt_640x480_mode = {
-+ .pixclock = 38461,
-+ .bpp = 8,
-+ .xres = 640,
-+ .yres = 480,
-+ .hsync_len = 63,
-+ .vsync_len = 2,
-+ .left_margin = 81,
-+ .upper_margin = 33,
-+ .right_margin = 16,
-+ .lower_margin = 10,
-+ .sync = (FB_SYNC_HOR_HIGH_ACT |
-+ FB_SYNC_VERT_HIGH_ACT),
-+ .cmap_greyscale = 0,
-+};
-+
-+static struct pxafb_mach_info generic_crt_640x480 = {
-+ .modes = &generic_crt_640x480_mode,
-+ .num_modes = 1,
-+ .lccr0 = (LCCR0_PAS),
-+ .lccr3 = (LCCR3_PixClkDiv(0x01) |
-+ LCCR3_Acb(0xff)),
-+ .cmap_inverse = 0,
-+ .cmap_static = 0,
-+};
-+
-+static struct pxafb_mode_info generic_crt_800x600_mode = {
-+ .pixclock = 28846,
-+ .bpp = 8,
-+ .xres = 800,
-+ .yres = 600,
-+ .hsync_len = 63,
-+ .vsync_len = 2,
-+ .left_margin = 26,
-+ .upper_margin = 21,
-+ .right_margin = 26,
-+ .lower_margin = 11,
-+ .sync = (FB_SYNC_HOR_HIGH_ACT |
-+ FB_SYNC_VERT_HIGH_ACT),
-+ .cmap_greyscale = 0,
-+};
-+
-+static struct pxafb_mach_info generic_crt_800x600 = {
-+ .modes = &generic_crt_800x600_mode,
-+ .num_modes = 1,
-+ .lccr0 = (LCCR0_PAS),
-+ .lccr3 = (LCCR3_PixClkDiv(0x02) |
-+ LCCR3_Acb(0xff)),
-+ .cmap_inverse = 0,
-+ .cmap_static = 0,
-+};
-+
-+static struct pxafb_mode_info generic_tft_320x240_mode = {
-+ .pixclock = 134615,
-+ .bpp = 16,
-+ .xres = 320,
-+ .yres = 240,
-+ .hsync_len = 63,
-+ .vsync_len = 7,
-+ .left_margin = 75,
-+ .upper_margin = 0,
-+ .right_margin = 15,
-+ .lower_margin = 15,
-+ .sync = 0,
-+ .cmap_greyscale = 0,
-+};
-+
-+static struct pxafb_mach_info generic_tft_320x240 = {
-+ .modes = &generic_tft_320x240_mode,
-+ .num_modes = 1,
-+ .lccr0 = (LCCR0_PAS),
-+ .lccr3 = (LCCR3_PixClkDiv(0x06) |
-+ LCCR3_Acb(0xff) |
-+ LCCR3_PCP),
-+ .cmap_inverse = 0,
-+ .cmap_static = 0,
-+};
-+
-+static struct pxafb_mode_info generic_stn_640x480_mode = {
-+ .pixclock = 57692,
-+ .bpp = 8,
-+ .xres = 640,
-+ .yres = 480,
-+ .hsync_len = 4,
-+ .vsync_len = 2,
-+ .left_margin = 10,
-+ .upper_margin = 5,
-+ .right_margin = 10,
-+ .lower_margin = 5,
-+ .sync = (FB_SYNC_HOR_HIGH_ACT |
-+ FB_SYNC_VERT_HIGH_ACT),
-+ .cmap_greyscale = 0,
-+};
-+
-+static struct pxafb_mach_info generic_stn_640x480 = {
-+ .modes = &generic_stn_640x480_mode,
-+ .num_modes = 1,
-+ .lccr0 = 0,
-+ .lccr3 = (LCCR3_PixClkDiv(0x02) |
-+ LCCR3_Acb(0xff)),
-+ .cmap_inverse = 0,
-+ .cmap_static = 0,
-+};
-+
-+static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
-+
-+static int __init cmx270_set_display(char *str)
-+{
-+ int disp_type = simple_strtol(str, NULL, 0);
-+ switch (disp_type) {
-+ case MTYPE_STN320x240:
-+ cmx270_display = &generic_stn_320x240;
-+ break;
-+ case MTYPE_TFT640x480:
-+ cmx270_display = &generic_tft_640x480;
-+ break;
-+ case MTYPE_CRT640x480:
-+ cmx270_display = &generic_crt_640x480;
-+ break;
-+ case MTYPE_CRT800x600:
-+ cmx270_display = &generic_crt_800x600;
-+ break;
-+ case MTYPE_TFT320x240:
-+ cmx270_display = &generic_tft_320x240;
-+ break;
-+ case MTYPE_STN640x480:
-+ cmx270_display = &generic_stn_640x480;
-+ break;
-+ default: /* fallback to CRT 640x480 */
-+ cmx270_display = &generic_crt_640x480;
-+ break;
-+ }
-+ return 1;
-+}
-+
-+__setup("monitor=", cmx270_set_display);
-+
-+/* PXA27x OHCI controller setup */
-+static int cmx270_ohci_init(struct device *dev)
-+{
-+ /* Set the Power Control Polarity Low */
-+ UHCHR = (UHCHR | UHCHR_PCPL) &
-+ ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-+
-+ return 0;
-+}
-+
-+static struct pxaohci_platform_data cmx270_ohci_platform_data = {
-+ .port_mode = PMM_PERPORT_MODE,
-+ .init = cmx270_ohci_init,
-+};
-+
-+
-+static int cmx270_mci_init(struct device *dev, irq_handler_t cmx270_detect_int, void *data)
-+{
-+ int err;
-+
-+ /*
-+ * setup GPIO for PXA27x MMC controller
-+ */
-+ pxa_gpio_mode(GPIO32_MMCCLK_MD);
-+ pxa_gpio_mode(GPIO112_MMCCMD_MD);
-+ pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-+ pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-+ pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-+ pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-+
-+ /* SB-X270 uses GPIO105 as SD power enable */
-+ pxa_gpio_mode(105 | GPIO_OUT);
-+
-+ /* card detect IRQ on GPIO 83 */
-+ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
-+ set_irq_type(CMX270_MMC_IRQ, IRQT_FALLING);
-+
-+ err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int, SA_INTERRUPT,
-+ "MMC card detect", data);
-+ if (err) {
-+ printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
-+{
-+ struct pxamci_platform_data* p_d = dev->platform_data;
-+
-+ if (( 1 << vdd) & p_d->ocr_mask) {
-+ printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
-+ GPCR(105) = GPIO_bit(105);
-+ } else {
-+ GPSR(105) = GPIO_bit(105);
-+ printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
-+ }
-+}
-+
-+static void cmx270_mci_exit(struct device *dev, void *data)
-+{
-+ free_irq(CMX270_MMC_IRQ, data);
-+}
-+
-+static struct pxamci_platform_data cmx270_mci_platform_data = {
-+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
-+ .init = cmx270_mci_init,
-+ .setpower = cmx270_mci_setpower,
-+ .exit = cmx270_mci_exit,
-+};
-+
-+#ifdef CONFIG_PM
-+/* extern struct subsystem power_subsys; */
-+static unsigned long sleep_save_ite[10];
-+static unsigned long sleep_save_msc[10];
-+
-+static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
-+{
-+#ifdef CONFIG_PCI
-+ /* save ITE state */
-+ sleep_save_ite[0] = IT8152_INTC_PDCNIMR;
-+ sleep_save_ite[1] = IT8152_INTC_LPCNIMR;
-+ sleep_save_ite[2] = IT8152_INTC_LPNIAR;
-+
-+ /* Clear ITE IRQ's */
-+ IT8152_INTC_PDCNIRR = 0;
-+ IT8152_INTC_LPCNIRR = 0;
-+#endif
-+
-+ /* save MSC registers */
-+ sleep_save_msc[0] = MSC0;
-+ sleep_save_msc[1] = MSC1;
-+ sleep_save_msc[2] = MSC2;
-+
-+ /* setup power saving mode registers */
-+ PCFR = 0x0;
-+ PSLR = 0xff400000;
-+ PMCR = 0x00000005;
-+ PWER = 0x80000000;
-+ PFER = 0x00000000;
-+ PRER = 0x00000000;
-+ PGSR0 = 0xC0018800;
-+ PGSR1 = 0x004F0002;
-+ PGSR2 = 0x6021C000;
-+ PGSR3 = 0x00020000;
-+
-+ return 0;
-+}
-+
-+static int cmx270_resume(struct sys_device *dev)
-+{
-+#ifdef CONFIG_PCI
-+ /* restore IT8152 state */
-+ IT8152_INTC_PDCNIMR = sleep_save_ite[0];
-+ IT8152_INTC_LPCNIMR = sleep_save_ite[1];
-+ IT8152_INTC_LPNIAR = sleep_save_ite[2];
-+#endif
-+
-+ /* restore MSC registers */
-+ MSC0 = sleep_save_msc[0];
-+ MSC1 = sleep_save_msc[1];
-+ MSC2 = sleep_save_msc[2];
-+
-+ return 0;
-+}
-+
-+static struct sysdev_class cmx270_pm_sysclass = {
-+ set_kset_name("pm"),
-+ .resume = cmx270_resume,
-+ .suspend = cmx270_suspend,
-+};
-+
-+static struct sys_device cmx270_pm_device = {
-+ .cls = &cmx270_pm_sysclass,
-+};
-+
-+static int __init cmx270_pm_init(void)
-+{
-+ int error;
-+ error = sysdev_class_register(&cmx270_pm_sysclass);
-+ if (error == 0)
-+ error = sysdev_register(&cmx270_pm_device);
-+ return error;
-+}
-+#else
-+static int __init cmx270_pm_init(void) { return 0; }
-+#endif
-+
-+static void __init cmx270_init(void)
-+{
-+ cmx270_pm_init();
-+
-+ set_pxa_fb_info(cmx270_display);
-+
-+ /* register CM-X270 platform devices */
-+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-+
-+ /* set MCI and OHCI platform parameters */
-+ pxa_set_mci_info(&cmx270_mci_platform_data);
-+ pxa_set_ohci_info(&cmx270_ohci_platform_data);
-+
-+ /* This enables the STUART */
-+ pxa_gpio_mode(GPIO46_STRXD_MD);
-+ pxa_gpio_mode(GPIO47_STTXD_MD);
-+
-+ /* This enables the BTUART */
-+ pxa_gpio_mode(GPIO42_BTRXD_MD);
-+ pxa_gpio_mode(GPIO43_BTTXD_MD);
-+ pxa_gpio_mode(GPIO44_BTCTS_MD);
-+ pxa_gpio_mode(GPIO45_BTRTS_MD);
-+}
-+
-+#ifdef CONFIG_PCI
-+static void cmx270_mask_irq(unsigned int irq)
-+{
-+ switch(irq) {
-+ case IT8152_IRQ(0):
-+ IT8152_INTC_PDCNIMR |= PCISERR_BIT;
-+ break;
-+ case IT8152_IRQ(1):
-+ IT8152_INTC_PDCNIMR |= H2PTADR_BIT;
-+ break;
-+ case IT8152_IRQ(2):
-+ IT8152_INTC_PDCNIMR |= H2PMAR_BIT;
-+ break;
-+ case IT8152_IRQ(3):
-+ IT8152_INTC_PDCNIMR |= PCI_INTA_BIT;
-+ break;
-+ case IT8152_IRQ(4):
-+ IT8152_INTC_PDCNIMR |= PCI_INTB_BIT;
-+ break;
-+ case IT8152_IRQ(5):
-+ IT8152_INTC_PDCNIMR |= PCI_INTC_BIT;
-+ break;
-+ case IT8152_IRQ(6):
-+ IT8152_INTC_PDCNIMR |= PCI_INTD_BIT;
-+ break;
-+ case IT8152_IRQ(7):
-+ IT8152_INTC_PDCNIMR |= USB_INT_BIT;
-+ break;
-+ case IT8152_IRQ(9):
-+ IT8152_INTC_PDCNIMR |= CDMA_INT_BIT;
-+ break;
-+ case IT8152_IRQ(10):
-+ IT8152_INTC_LDCNIMR |= ITESER_BIT;
-+ break;
-+ }
-+}
-+
-+static void cmx270_unmask_irq(unsigned int irq)
-+{
-+ switch(irq) {
-+ case IT8152_IRQ(0):
-+ IT8152_INTC_PDCNIMR &= (~PCISERR_BIT);
-+ break;
-+ case IT8152_IRQ(1):
-+ IT8152_INTC_PDCNIMR &= (~H2PTADR_BIT);
-+ break;
-+ case IT8152_IRQ(2):
-+ IT8152_INTC_PDCNIMR &= (~H2PMAR_BIT);
-+ break;
-+ case IT8152_IRQ(3):
-+ IT8152_INTC_PDCNIMR &= (~PCI_INTA_BIT);
-+ break;
-+ case IT8152_IRQ(4):
-+ IT8152_INTC_PDCNIMR &= (~PCI_INTB_BIT);
-+ break;
-+ case IT8152_IRQ(5):
-+ IT8152_INTC_PDCNIMR &= (~PCI_INTC_BIT);
-+ break;
-+ case IT8152_IRQ(6):
-+ IT8152_INTC_PDCNIMR &= (~PCI_INTD_BIT);
-+ break;
-+ case IT8152_IRQ(7):
-+ IT8152_INTC_PDCNIMR &= (~USB_INT_BIT);
-+ break;
-+ case IT8152_IRQ(9):
-+ IT8152_INTC_PDCNIMR &= (~CDMA_INT_BIT);
-+ break;
-+ case IT8152_IRQ(10):
-+ IT8152_INTC_LDCNIMR &= (~ITESER_BIT);
-+ break;
-+ }
-+}
-+
-+static struct irq_chip cmx270_irq_chip = {
-+ .ack = cmx270_mask_irq,
-+ .mask = cmx270_mask_irq,
-+ .unmask = cmx270_unmask_irq,
-+};
-+#endif
-+
-+static void __init cmx270_init_irq(void)
-+{
-+ int irq;
-+
-+ pxa27x_init_irq();
-+
-+ IT8152_INTC_PDCNIMR = 0xffff;
-+
-+#ifdef CONFIG_PCI
-+ /* Disable and clear IRQ's for ITE8152 */
-+ IT8152_INTC_PDCNIMR = 0xffff;
-+ IT8152_INTC_PDCNIRR = 0;
-+ IT8152_INTC_LPCNIMR = 0xffff;
-+ IT8152_INTC_LPCNIRR = 0;
-+ IT8152_INTC_LDCNIMR = 0xffff;
-+ IT8152_INTC_LDCNIRR = 0;
-+
-+ for(irq = IT8152_IRQ(0); irq <= IT8152_IRQ_MAX; irq++) {
-+ set_irq_chip(irq, &cmx270_irq_chip);
-+ set_irq_handler(irq, handle_level_irq);
-+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-+ }
-+
-+ /* INTC signal from IT8152 is connected to GPIO0 */
-+ pxa_gpio_mode(IRQ_GPIO_IT8152_IRQ);
-+ set_irq_chained_handler(IRQ_GPIO_IT8152_IRQ, cmx270_irq_demux);
-+ set_irq_type(IRQ_GPIO_IT8152_IRQ, IRQT_RISING);
-+#endif
-+
-+ /* Setup interrupt for dm9000 */
-+ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
-+ set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
-+
-+ /* Setup interrupt for 2700G */
-+ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
-+ set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
-+}
-+
-+static void __init cmx270_map_io(void)
-+{
-+ pxa_map_io();
-+ iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
-+}
-+
-+
-+MACHINE_START(ARMCORE, "Compulab CM-x270")
-+ .boot_params = 0xa0000100,
-+ .phys_io = 0x40000000,
-+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
-+ .map_io = cmx270_map_io,
-+ .init_irq = cmx270_init_irq,
-+ .timer = &pxa_timer,
-+ .init_machine = cmx270_init,
-+MACHINE_END
-diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
-index 4468cb3..02b04e2 100644
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -87,6 +87,12 @@ config LEDS_H1940
- help
- This option enables support for the LEDs on the h1940.
-
-+config LEDS_CM_X270
-+ tristate "LED Support for the CM-X270 LEDs"
-+ depends on LEDS_CLASS && MACH_ARMCORE
-+ help
-+ This option enables support for the CM-X270 LEDs.
-+
- config LEDS_COBALT
- tristate "LED Support for Cobalt Server front LED"
- depends on LEDS_CLASS && MIPS_COBALT
-diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
-index f8995c9..12a860c 100644
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
- obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
- obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
-+obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
-diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c
-new file mode 100644
-index 0000000..63b7e9e
---- /dev/null
-+++ b/drivers/leds/leds-cm-x270.c
-@@ -0,0 +1,126 @@
-+/*
-+ * drivers/leds/leds-cm-x270.c
-+ *
-+ * Copyright 2007 CompuLab Ltd.
-+ * Author: Mike Rapoport <mike at compulab.co.il>
-+ *
-+ * Based on leds-corgi.c
-+ * Author: Richard Purdie <rpurdie at openedhand.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#define GPIO_RED_LED (93)
-+#define GPIO_GREEN_LED (94)
-+
-+#define CMX270_RED_ON() GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED)
-+#define CMX270_RED_OFF() GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED)
-+#define CMX270_GREEN_ON() GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED)
-+#define CMX270_GREEN_OFF() GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED)
-+
-+
-+static void cmx270_red_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+ if (value)
-+ CMX270_RED_ON();
-+ else
-+ CMX270_RED_OFF();
-+}
-+
-+static void cmx270_green_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+ if (value)
-+ CMX270_GREEN_ON();
-+ else
-+ CMX270_GREEN_OFF();
-+}
-+
-+static struct led_classdev cmx270_red_led = {
-+ .name = "cm-x270:red",
-+ .default_trigger = "nand-disk",
-+ .brightness_set = cmx270_red_set,
-+};
-+
-+static struct led_classdev cmx270_green_led = {
-+ .name = "cm-x270:green",
-+ .default_trigger = "heartbeat",
-+ .brightness_set = cmx270_green_set,
-+};
-+
-+#ifdef CONFIG_PM
-+static int cmx270led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ led_classdev_suspend(&cmx270_red_led);
-+ led_classdev_suspend(&cmx270_green_led);
-+ return 0;
-+}
-+
-+static int cmx270led_resume(struct platform_device *dev)
-+{
-+ led_classdev_resume(&cmx270_red_led);
-+ led_classdev_resume(&cmx270_green_led);
-+ return 0;
-+}
-+#endif
-+
-+static int cmx270led_probe(struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ ret = led_classdev_register(&pdev->dev, &cmx270_red_led);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = led_classdev_register(&pdev->dev, &cmx270_green_led);
-+ if (ret < 0)
-+ led_classdev_unregister(&cmx270_red_led);
-+
-+ return ret;
-+}
-+
-+static int cmx270led_remove(struct platform_device *pdev)
-+{
-+ led_classdev_unregister(&cmx270_red_led);
-+ led_classdev_unregister(&cmx270_green_led);
-+ return 0;
-+}
-+
-+static struct platform_driver cmx270led_driver = {
-+ .probe = cmx270led_probe,
-+ .remove = cmx270led_remove,
-+#ifdef CONFIG_PM
-+ .suspend = cmx270led_suspend,
-+ .resume = cmx270led_resume,
-+#endif
-+ .driver = {
-+ .name = "cm-x270-led",
-+ },
-+};
-+
-+static int __init cmx270led_init(void)
-+{
-+ return platform_driver_register(&cmx270led_driver);
-+}
-+
-+static void __exit cmx270led_exit(void)
-+{
-+ platform_driver_unregister(&cmx270led_driver);
-+}
-+
-+module_init(cmx270led_init);
-+module_exit(cmx270led_exit);
-+
-+MODULE_AUTHOR("Richard Purdie <rpurdie at openedhand.com>");
-+MODULE_DESCRIPTION("Corgi LED driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
-index c551925..b34f875 100644
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -940,6 +940,14 @@ config DM9000
- <file:Documentation/networking/net-modules.txt>. The module will be
- called dm9000.
-
-+config DM9000_NOEPROM
-+ bool "DM9000 without EEPROM attached"
-+ depends on DM9000
-+ ---help---
-+ Select this option if you have DM9000 chipset without EEPROM
-+ containing the MAC address. In this case MAC address should
-+ be set either by the bootloader or using ifconfig
-+
- config SMC911X
- tristate "SMSC LAN911[5678] support"
- select CRC32
-diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
-index 738aa59..2371c6b 100644
---- a/drivers/net/dm9000.c
-+++ b/drivers/net/dm9000.c
-@@ -577,6 +577,7 @@ dm9000_probe(struct platform_device *pdev)
- db->mii.mdio_read = dm9000_phy_read;
- db->mii.mdio_write = dm9000_phy_write;
-
-+#ifndef CONFIG_DM9000_NOEPROM
- /* Read SROM content */
- for (i = 0; i < 64; i++)
- ((u16 *) db->srom)[i] = read_srom_word(db, i);
-@@ -584,6 +585,11 @@ dm9000_probe(struct platform_device *pdev)
- /* Set Node Address */
- for (i = 0; i < 6; i++)
- ndev->dev_addr[i] = db->srom[i];
-+#else
-+ /* The Node Address was set by bootloader */
-+ for (i=0; i<6; i++)
-+ ndev->dev_addr[i] = ior(db, 0x10+i);
-+#endif
-
- if (!is_valid_ether_addr(ndev->dev_addr)) {
- /* try reading from mac */
-diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h
-new file mode 100644
-index 0000000..24613a5
---- /dev/null
-+++ b/include/asm-arm/arch-pxa/cm-x270.h
-@@ -0,0 +1,71 @@
-+/*
-+ * linux/include/asm/arch-pxa/armcore.h
-+ *
-+ * Compulab Ltd., 2003
-+ *
-+ * ARMCore registers
-+ */
-+
-+
-+#define CMX270_CS1_PHYS (PXA_CS1_PHYS)
-+#define MARATHON_PHYS (PXA_CS2_PHYS)
-+#define CMX270_IDE104_PHYS (PXA_CS3_PHYS)
-+#define CMX270_IT8152_PHYS (PXA_CS4_PHYS)
-+
-+#define PXA_CS_SIZE (64*1024*1024)
-+
-+/* Virtual map */
-+
-+#define CMX270_VIRT_BASE (0xe8000000)
-+
-+#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
-+#define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + PXA_CS_SIZE)
-+
-+
-+/* GPIO related definitions */
-+#define GPIO_IT8152_IRQ (22)
-+#define GPIO_RED_LED (93)
-+#define GPIO_GREEN_LED (94)
-+
-+
-+#define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ)
-+#define PME_IRQ IRQ_GPIO(0)
-+#define CMX270_IDE_IRQ IRQ_GPIO(100)
-+#define CMX270_GPIRQ1 IRQ_GPIO(101)
-+#define CMX270_TOUCHIRQ IRQ_GPIO(96)
-+#define CMX270_ETHIRQ IRQ_GPIO(10)
-+#define CMX270_GFXIRQ IRQ_GPIO(95)
-+#define CMX270_NANDIRQ IRQ_GPIO(89)
-+#define CMX270_MMC_IRQ IRQ_GPIO(83)
-+
-+/* LED macros */
-+#define CMX270_RED_ON() GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED)
-+#define CMX270_RED_OFF() GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED)
-+#define CMX270_GREEN_ON() GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED)
-+#define CMX270_GREEN_OFF() GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED)
-+
-+/* PCMCIA related definitions */
-+#define PCC_DETECT(x) (GPLR(84 - (x)) & GPIO_bit(84 - (x)))
-+#define PCC_READY(x) (GPLR(82 - (x)) & GPIO_bit(81 - (x)))
-+
-+#define PCMCIA_S0_CD_VALID IRQ_GPIO(84)
-+#define PCMCIA_S0_CD_VALID_EDGE GPIO_BOTH_EDGES
-+
-+#define PCMCIA_S1_CD_VALID IRQ_GPIO(83)
-+#define PCMCIA_S1_CD_VALID_EDGE GPIO_BOTH_EDGES
-+
-+#define PCMCIA_S0_RDYINT IRQ_GPIO(82)
-+#define PCMCIA_S1_RDYINT IRQ_GPIO(81)
-+
-+#define PCMCIA_RESET_GPIO 53
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
-index 3861217..beb240e 100644
---- a/include/asm-arm/arch-pxa/hardware.h
-+++ b/include/asm-arm/arch-pxa/hardware.h
-@@ -126,4 +126,15 @@ extern unsigned int get_lcdclk_frequency_10khz(void);
-
- #endif
-
-+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-+#define HAVE_ARCH_PCI_SET_DMA_MASK
-+#ifndef __ASSEMBLY__
-+extern unsigned long armcore_pcibios_min_io;
-+extern unsigned long armcore_pcibios_min_mem;
-+#endif
-+#define PCIBIOS_MIN_IO (armcore_pcibios_min_io)
-+#define PCIBIOS_MIN_MEM (armcore_pcibios_min_mem)
-+#define pcibios_assign_all_busses() 1
-+#endif
-+
- #endif /* _ASM_ARCH_HARDWARE_H */
-diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
-index a07fe0f..efb3d42 100644
---- a/include/asm-arm/arch-pxa/irqs.h
-+++ b/include/asm-arm/arch-pxa/irqs.h
-@@ -216,3 +216,23 @@
- #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
- #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
- #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
-+
-+/* ITE8152 irqs on CM-x2xx */
-+#ifdef CONFIG_MACH_ARMCORE
-+#define IT8152_IRQ(x) (IRQ_BOARD_START + (x))
-+#define PCISERR IT8152_IRQ(0)
-+#define H2PTADR IT8152_IRQ(1)
-+#define H2PMAR IT8152_IRQ(2)
-+#define PCI_INTA IT8152_IRQ(3)
-+#define PCI_INTB IT8152_IRQ(4)
-+#define PCI_INTC IT8152_IRQ(5)
-+#define PCI_INTD IT8152_IRQ(6)
-+#define USB_INT IT8152_IRQ(7)
-+#define AUDIO_INT IT8152_IRQ(8)
-+#define CDMA_INT IT8152_IRQ(9)
-+#define IRQ_ITESER IT8152_IRQ(10)
-+#define IT8152_IRQ_MAX IT8152_IRQ(10)
-+
-+#undef NR_IRQS
-+#define NR_IRQS IT8152_IRQ_MAX+1
-+#endif
-diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h
-index d9bfb39..83db3cb 100644
---- a/include/asm-arm/memory.h
-+++ b/include/asm-arm/memory.h
-@@ -141,6 +141,16 @@
- * allocations. This must be the smallest DMA mask in the system,
- * so a successful GFP_DMA allocation will always satisfy this.
- */
-+
-+#ifdef CONFIG_PCI_HOST_ITE8152
-+void it8152_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-+
-+#define arch_adjust_zones(node, size, holes) \
-+ it8152_adjust_zones(node, size, holes)
-+
-+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
-+#endif
-+
- #ifndef ISA_DMA_THRESHOLD
- #define ISA_DMA_THRESHOLD (0xffffffffULL)
- #endif
---
-1.5.2.5
-
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0002-cm-x270-match-type.patch b/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0002-cm-x270-match-type.patch
deleted file mode 100644
index 68da301..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0002-cm-x270-match-type.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From e566813cedb9f91724597df45c11075023a7b589 Mon Sep 17 00:00:00 2001
-From: Cliff Brake <cbrake at happy.dev.bec-systems.com>
-Date: Fri, 20 Jul 2007 18:58:27 -0400
-Subject: [PATCH] cm-x270-match-type
-
----
- arch/arm/boot/compressed/head-xscale.S | 5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
-index 73c5d9e..dc89459 100644
---- a/arch/arm/boot/compressed/head-xscale.S
-+++ b/arch/arm/boot/compressed/head-xscale.S
-@@ -53,3 +53,8 @@ __XScale_start:
- str r1, [r0, #0x18]
- #endif
-
-+#if defined(CONFIG_MACH_ARMCORE)
-+ mov r7, #(MACH_TYPE_ARMCORE & 0xFF00)
-+ add r7, r7, #(MACH_TYPE_ARMCORE & 0xFF)
-+#endif
-+
---
-1.5.1.6
-
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0003-cm-x270-ide.patch b/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0003-cm-x270-ide.patch
deleted file mode 100644
index 0ff115e..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0003-cm-x270-ide.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From f260d5fa4c99cd7df949e6408af59807f8ccf224 Mon Sep 17 00:00:00 2001
-From: Cliff Brake <cbrake at happy.dev.bec-systems.com>
-Date: Fri, 20 Jul 2007 18:59:39 -0400
-Subject: [PATCH] cm-x270-ide
-
----
- drivers/ide/Kconfig | 8 +++
- drivers/ide/arm/Makefile | 1 +
- drivers/ide/arm/cm-x270-ide.c | 135 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 144 insertions(+), 0 deletions(-)
- create mode 100644 drivers/ide/arm/cm-x270-ide.c
-
-diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
-index b1a9b81..7de4155 100644
---- a/drivers/ide/Kconfig
-+++ b/drivers/ide/Kconfig
-@@ -864,6 +864,14 @@ config BLK_DEV_IDE_BAST
- Say Y here if you want to support the onboard IDE channels on the
- Simtec BAST or the Thorcom VR1000
-
-+config BLK_DEV_IDE_CM_X270
-+ tristate "CompuLab CM-X270 IDE support"
-+ depends on ARM && (MACH_ARMCORE)
-+ help
-+ Say Y here if you want to support the onboard IDE channels on the
-+ CompuLab CM-X270 module
-+
-+
- config BLK_DEV_GAYLE
- bool "Amiga Gayle IDE interface support"
- depends on AMIGA
-diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile
-index 6a78f07..e5cadb7 100644
---- a/drivers/ide/arm/Makefile
-+++ b/drivers/ide/arm/Makefile
-@@ -2,5 +2,6 @@
- obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o
- obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o
- obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o
-+obj-$(CONFIG_BLK_DEV_IDE_CM_X270) += cm-x270-ide.o
-
- EXTRA_CFLAGS := -Idrivers/ide
-diff --git a/drivers/ide/arm/cm-x270-ide.c b/drivers/ide/arm/cm-x270-ide.c
-new file mode 100644
-index 0000000..a8b15aa
---- /dev/null
-+++ b/drivers/ide/arm/cm-x270-ide.c
-@@ -0,0 +1,135 @@
-+/* linux/drivers/ide/arm/cm-x270-ide.c
-+ *
-+ * Copyright (c) 2006 CompuLab, Ltd
-+ * Mike Rapoport <mike at compulab.co.il>
-+ *
-+ * Based on linux/drivers/ide/arm/bast-ide.c
-+ * Copyright (c) 2003-2004 Simtec Electronics
-+ * Ben Dooks <ben at simtec.co.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/errno.h>
-+#include <linux/ide.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+
-+#include <asm/io.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/cm-x270.h>
-+
-+#define CMX270_SB270_IDECS0_VIRT (CMX270_IDE104_VIRT + (1<<24) + (1<<25))
-+#define CMX270_SB270_IDECS1_VIRT (CMX270_IDE104_VIRT + (1<<25))
-+#define CMX270_ATX_IDECS0_VIRT (CMX270_IDE104_VIRT + (1<<25))
-+#define CMX270_ATX_IDECS1_VIRT (CMX270_IDE104_VIRT + (1<<25) + (1<<22))
-+
-+/* list of registered interfaces */
-+static ide_hwif_t *ifs[1];
-+
-+static int __init
-+cmx270_ide_register(unsigned int base, unsigned int aux, int irq,
-+ ide_hwif_t **hwif)
-+{
-+ hw_regs_t hw;
-+
-+ memset(&hw, 0, sizeof(hw));
-+
-+ if(!base || !aux) return -EINVAL;
-+
-+ printk(KERN_DEBUG "%s: base = %08x, aux = %08x\n", __FUNCTION__,
-+ base, aux);
-+
-+ /* Different mappings for local bus IDE and PCMCIA IDE */
-+ if(base == CMX270_SB270_IDECS0_VIRT) {
-+ hw.io_ports[IDE_DATA_OFFSET] = base + 0;
-+ hw.io_ports[IDE_ERROR_OFFSET] = base + (0x1<<3);
-+ hw.io_ports[IDE_NSECTOR_OFFSET]= base + (0x2<<3);
-+ hw.io_ports[IDE_SECTOR_OFFSET]= base + (0x3<<3);
-+ hw.io_ports[IDE_LCYL_OFFSET]= base + (0x4<<3);
-+ hw.io_ports[IDE_HCYL_OFFSET]= base + (0x5<<3);
-+ hw.io_ports[IDE_SELECT_OFFSET]= base + (0x6<<3);
-+ hw.io_ports[IDE_STATUS_OFFSET]= base + (0x7<<3);
-+ hw.io_ports[IDE_CONTROL_OFFSET] = aux+(0x6<<3);
-+ }
-+ else if (base == CMX270_ATX_IDECS0_VIRT) { /* atx base */
-+ hw.io_ports[IDE_DATA_OFFSET] = base + 0;
-+ hw.io_ports[IDE_ERROR_OFFSET] = base + 8;
-+ hw.io_ports[IDE_NSECTOR_OFFSET]= base + 2;
-+ hw.io_ports[IDE_SECTOR_OFFSET]= base + 10;
-+ hw.io_ports[IDE_LCYL_OFFSET]= base + 4;
-+ hw.io_ports[IDE_HCYL_OFFSET]= base + 12;
-+ hw.io_ports[IDE_SELECT_OFFSET]= base + 6; //6;
-+ hw.io_ports[IDE_STATUS_OFFSET]= base + 14;
-+ hw.io_ports[IDE_CONTROL_OFFSET] = (aux+0x6);
-+ } else {
-+ printk(KERN_DEBUG "%s: registering wrong IDE i/f\n", __FUNCTION__);
-+ hw.io_ports[IDE_DATA_OFFSET] = base + 8;
-+ hw.io_ports[IDE_ERROR_OFFSET] = base + 13;
-+ hw.io_ports[IDE_NSECTOR_OFFSET] = base + 2;
-+ hw.io_ports[IDE_SECTOR_OFFSET] = base + 3;
-+ hw.io_ports[IDE_LCYL_OFFSET] = base + 4;
-+ hw.io_ports[IDE_HCYL_OFFSET] = base + 5;
-+ hw.io_ports[IDE_SELECT_OFFSET] = base + 6;
-+ hw.io_ports[IDE_STATUS_OFFSET] = base + 7;
-+ hw.io_ports[IDE_CONTROL_OFFSET] = aux;
-+ }
-+
-+ hw.irq = irq;
-+
-+ return ide_register_hw(&hw, hwif);
-+}
-+
-+static int __init cmx270_ide_init(void)
-+{
-+ int retval = 0;
-+
-+ if (!(machine_is_armcore()))
-+ goto out;
-+
-+ printk("CM-X270: initializing IDE interface\n");
-+
-+ MSC1 = 0x7ffc7ff4;
-+
-+ /* Interrupts on rising edge: lines are inverted before they get to
-+ the PXA */
-+ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_IDE_IRQ));
-+
-+ /* try SB-X270 */
-+ set_irq_type(CMX270_IDE_IRQ, IRQ_TYPE_EDGE_RISING);
-+ retval = cmx270_ide_register(CMX270_SB270_IDECS0_VIRT,
-+ CMX270_SB270_IDECS1_VIRT,
-+ CMX270_IDE_IRQ, &ifs[0]);
-+ if (retval >= 0) {
-+ printk(KERN_DEBUG "%s: found IDE interface on SB-X270\n",
-+ __FUNCTION__);
-+ goto out;
-+ }
-+
-+ /* SB-X270 detection failed, try ATX */
-+ set_irq_type(CMX270_IDE_IRQ, IRQ_TYPE_EDGE_FALLING);
-+ retval = cmx270_ide_register(CMX270_ATX_IDECS0_VIRT,
-+ CMX270_ATX_IDECS1_VIRT,
-+ CMX270_IDE_IRQ, &ifs[0]);
-+
-+ if ( retval >= 0 ) {
-+ printk(KERN_DEBUG "%s: found IDE interface on ATX\n",
-+ __FUNCTION__);
-+ goto out;
-+ }
-+
-+ out:
-+ return retval;
-+}
-+
-+module_init(cmx270_ide_init);
-+
-+MODULE_AUTHOR("CompuLab");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("CompuLab CM-X270 IDE driver");
---
-1.5.1.6
-
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0004-cm-x270-it8152.patch b/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0004-cm-x270-it8152.patch
deleted file mode 100644
index 274eaf2..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0004-cm-x270-it8152.patch
+++ /dev/null
@@ -1,496 +0,0 @@
-From 1306abec905df1ff5cf2b1d91ac0d94d18d96c5b Mon Sep 17 00:00:00 2001
-From: Cliff Brake <cbrake at happy.dev.bec-systems.com>
-Date: Fri, 20 Jul 2007 19:00:07 -0400
-Subject: [PATCH] cm-x270-it8152
-
----
- arch/arm/common/Makefile | 1 +
- arch/arm/common/it8152.c | 272 +++++++++++++++++++++++++++++++++++++
- arch/arm/kernel/bios32.c | 28 ++++-
- include/asm-arm/hardware/it8152.h | 104 ++++++++++++++
- include/asm-arm/pci.h | 7 +
- include/linux/pci_ids.h | 1 +
- 6 files changed, 410 insertions(+), 3 deletions(-)
- create mode 100644 arch/arm/common/it8152.c
- create mode 100644 include/asm-arm/hardware/it8152.h
-
-diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
-index e1289a2..3d0b9fa 100644
---- a/arch/arm/common/Makefile
-+++ b/arch/arm/common/Makefile
-@@ -17,3 +17,4 @@ obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o
- obj-$(CONFIG_SHARP_SCOOP) += scoop.o
- obj-$(CONFIG_ARCH_IXP2000) += uengine.o
- obj-$(CONFIG_ARCH_IXP23XX) += uengine.o
-+obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
-diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
-new file mode 100644
-index 0000000..8563610
---- /dev/null
-+++ b/arch/arm/common/it8152.c
-@@ -0,0 +1,272 @@
-+/*
-+ * arch/arm/common/it8152.c: PCI functions for IT8152
-+ *
-+ * Compulab Ltd, 2002-2006
-+ *
-+ * The DMA bouncing is taken from arch/arm/mach-ixp4xx/common-pci.c
-+ * (see this file for respective copyrights)
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/ptrace.h>
-+#include <linux/interrupt.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <asm/mach/map.h>
-+
-+
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/mach/pci.h>
-+#include <asm/hardware/it8152.h>
-+
-+#define MAX_SLOTS 21
-+
-+static unsigned long
-+it8152_pci_dev_base_address(struct pci_bus *bus, unsigned int devfn)
-+{
-+ unsigned long addr = 0;
-+
-+ if (bus->number == 0) {
-+ if (devfn < PCI_DEVFN(MAX_SLOTS, 0))
-+ addr = (devfn << 8);
-+ } else
-+ addr = (bus->number << 16) | (devfn << 8);
-+
-+ return addr;
-+}
-+
-+static int
-+it8152_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-+ int size, u32 *value)
-+{
-+ unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
-+ u32 v;
-+ int shift;
-+
-+#ifdef CONFIG_MACH_ARMCORE
-+ if(devfn!=0) IT8152_GPIO_GPLR=0x00;
-+#endif
-+ shift = (where & 3);
-+
-+ IT8152_PCI_CFG_ADDR = (addr + where);
-+ v = (IT8152_PCI_CFG_DATA >> (8 * (shift)));
-+
-+ *value = v;
-+
-+#ifdef CONFIG_MACH_ARMCORE
-+ if(devfn!=0) IT8152_GPIO_GPLR=0x20;
-+#endif
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+
-+static int
-+it8152_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-+ int size, u32 value)
-+{
-+ unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
-+ u32 v, vtemp, mask=0;
-+ int shift;
-+
-+#ifdef CONFIG_MACH_ARMCORE
-+ if(devfn!=0) IT8152_GPIO_GPLR=0x00;
-+#endif
-+
-+ if(size==1) mask=0xff;
-+ if(size==2) mask=0xffff;
-+
-+ shift = (where & 3);
-+
-+ IT8152_PCI_CFG_ADDR = addr + where;
-+ vtemp = IT8152_PCI_CFG_DATA;
-+
-+ if(mask) vtemp &= ~(mask << (8 * shift));
-+ else vtemp = 0;
-+
-+ v = (value << (8 * shift));
-+ IT8152_PCI_CFG_ADDR = addr + where;
-+ IT8152_PCI_CFG_DATA = (v | vtemp);
-+
-+#ifdef CONFIG_MACH_ARMCORE
-+ if(devfn!=0) IT8152_GPIO_GPLR=0x20;
-+#endif
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static struct pci_ops it8152_ops = {
-+ .read = it8152_pci_read_config,
-+ .write = it8152_pci_write_config,
-+};
-+
-+static struct resource it8152_io = {
-+ .name = "IT8152 PCI I/O region",
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static struct resource it8152_mem1 = {
-+ .name = "First IT8152 PCI memory region",
-+ .start = 0x10000000,
-+ .end = 0x13e00000,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+/*
-+ * The following functions are needed for DMA bouncing.
-+ * ITE8152 chip can addrees up to 64MByte, so all the devices
-+ * connected to ITE8152 (PCI and USB) should have limited DMA window
-+ */
-+
-+/*
-+ * Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all
-+ * other devices.
-+ */
-+static int it8152_pci_platform_notify(struct device *dev)
-+{
-+ if ( dev->bus == &pci_bus_type ) {
-+ if ( dev->dma_mask )
-+ *dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
-+ dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
-+ dmabounce_register_dev(dev, 2048, 4096);
-+ }
-+ return 0;
-+}
-+
-+static int it8152_pci_platform_notify_remove(struct device *dev)
-+{
-+ if ( dev->bus == &pci_bus_type ) {
-+ dmabounce_unregister_dev(dev);
-+ }
-+ return 0;
-+}
-+
-+int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-+{
-+ dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
-+ __FUNCTION__, dma_addr, size);
-+ return (dev->bus == &pci_bus_type ) &&
-+ ((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
-+}
-+
-+/*
-+ * Only first 64MB of memory can be accessed via PCI.
-+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
-+ * This is really ugly and we need a better way of specifying
-+ * DMA-capable regions of memory.
-+ */
-+void __init it8152_adjust_zones(int node, unsigned long *zone_size,
-+ unsigned long *zhole_size)
-+{
-+ unsigned int sz = SZ_64M >> PAGE_SHIFT;
-+
-+ /*
-+ * Only adjust if > 64M on current system
-+ */
-+ if (node || (zone_size[0] <= sz))
-+ return;
-+
-+ zone_size[1] = zone_size[0] - sz;
-+ zone_size[0] = sz;
-+ zhole_size[1] = zhole_size[0];
-+ zhole_size[0] = 0;
-+}
-+
-+/*
-+ * We override these so we properly do dmabounce otherwise drivers
-+ * are able to set the dma_mask to 0xffffffff and we can no longer
-+ * trap bounces. :(
-+ *
-+ * We just return true on everyhing except for < 64MB in which case
-+ * we will fail miseralby and die since we can't handle that case.
-+ */
-+int
-+pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-+{
-+ printk(KERN_INFO "===> %s: %s %x\n", __FUNCTION__, dev->dev.bus_id, mask);
-+ if (mask >= PHYS_OFFSET + SZ_64M - 1 )
-+ return 0;
-+
-+ return -EIO;
-+}
-+
-+int
-+pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-+{
-+ printk(KERN_INFO "===> %s: %s %x\n", __FUNCTION__, dev->dev.bus_id, mask);
-+ if (mask >= PHYS_OFFSET + SZ_64M - 1 )
-+ return 0;
-+
-+ return -EIO;
-+}
-+
-+EXPORT_SYMBOL(pci_set_dma_mask);
-+EXPORT_SYMBOL(pci_set_consistent_dma_mask);
-+
-+
-+int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
-+{
-+ it8152_io.start = IT8152_IO_BASE + 0x12000;
-+ it8152_io.end = IT8152_IO_BASE + 0x100000;
-+
-+ if (request_resource(&ioport_resource, &it8152_io)) {
-+ printk(KERN_ERR "PCI: unable to allocate IO region\n");
-+ return -EBUSY;
-+ }
-+ if (request_resource(&iomem_resource, &it8152_mem1)) {
-+ printk(KERN_ERR "PCI: unable to allocate memory region\n");
-+ return -EBUSY;
-+ }
-+
-+ sys->resource[0] = &it8152_io;
-+ sys->resource[1] = &it8152_mem1;
-+
-+ if (platform_notify || platform_notify_remove) {
-+ printk(KERN_ERR "PCI: Can't use platform_notify\n");
-+ return -EBUSY;
-+ }
-+
-+ platform_notify = it8152_pci_platform_notify;
-+ platform_notify_remove = it8152_pci_platform_notify_remove;
-+
-+ return 1;
-+}
-+
-+/*
-+ * If we set up a device for bus mastering, we need to check the latency
-+ * timer as we don't have even crappy BIOSes to set it properly.
-+ * The implementation is from arch/i386/pci/i386.c
-+ */
-+unsigned int pcibios_max_latency = 255;
-+
-+void pcibios_set_master(struct pci_dev *dev)
-+{
-+ u8 lat;
-+
-+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
-+ if (lat < 16)
-+ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
-+ else if (lat > pcibios_max_latency)
-+ lat = pcibios_max_latency;
-+ else
-+ return;
-+ printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
-+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-+}
-+
-+
-+struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys)
-+{
-+ return pci_scan_bus(nr, &it8152_ops, sys);
-+}
-+
-diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
-index 240c448..d8d2352 100644
---- a/arch/arm/kernel/bios32.c
-+++ b/arch/arm/kernel/bios32.c
-@@ -279,6 +279,25 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
- }
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
-
-+static void __init pci_fixup_it8152(struct pci_dev *dev)
-+{
-+ int i;
-+ /* fixup for ITE 8152 devices */
-+ /* FIXME: add defines for class 0x68000 and 0x80103 */
-+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST ||
-+ dev->class == 0x68000 ||
-+ dev->class == 0x80103) {
-+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-+ dev->resource[i].start = 0;
-+ dev->resource[i].end = 0;
-+ dev->resource[i].flags = 0;
-+ }
-+ }
-+}
-+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152);
-+
-+
-+
- void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
- {
- if (debug_pci)
-@@ -292,9 +311,12 @@ void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
- */
- static inline int pdev_bad_for_parity(struct pci_dev *dev)
- {
-- return (dev->vendor == PCI_VENDOR_ID_INTERG &&
-- (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
-- dev->device == PCI_DEVICE_ID_INTERG_2010));
-+ return ((dev->vendor == PCI_VENDOR_ID_INTERG &&
-+ (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
-+ dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
-+ (dev->vendor == PCI_VENDOR_ID_ITE &&
-+ dev->device == PCI_DEVICE_ID_ITE_8152));
-+
- }
-
- /*
-diff --git a/include/asm-arm/hardware/it8152.h b/include/asm-arm/hardware/it8152.h
-new file mode 100644
-index 0000000..d28210d
---- /dev/null
-+++ b/include/asm-arm/hardware/it8152.h
-@@ -0,0 +1,104 @@
-+/*
-+ * arch/arm/mach-pxa/it8152.h
-+ *
-+ * Compulab Ltd., 2006
-+ *
-+ * ITE 8152 companion chip definitions
-+ */
-+
-+
-+/* #define CMX270_IT8152_VIRT (CMX270_VIRT_BASE) */
-+
-+
-+extern unsigned long it8152_base_address;
-+
-+#define IT8152_IO_BASE (it8152_base_address + 0x03e00000)
-+#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000)
-+
-+/* #define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ) */
-+
-+#define IT8152_SHORT_IO(x) (*((volatile unsigned short *)(IT8152_CFGREG_BASE+(x))))
-+#define IT8152_LONG_IO(x) (*((volatile unsigned long *)(IT8152_CFGREG_BASE+(x))))
-+
-+
-+#define IT8152_PCI_MEMBASE (*((volatile unsigned long *)(it8152_base_address)))
-+/* #define IT8152_PCI_IOBASE (*((volatile unsigned long *)(it8152_base_address + 0x3e00000))) */
-+
-+#define IT8152_PCI_IACK (*((volatile unsigned long *)(it8152_base_address + 0x3f00808)))
-+#define IT8152_PCI_CFG_ADDR (*((volatile unsigned long *)(it8152_base_address + 0x3f00800)))
-+#define IT8152_PCI_CFG_DATA (*((volatile unsigned long *)(it8152_base_address + 0x3f00804)))
-+
-+#define IT_BUSNUM_SHF 16
-+#define IT_DEVNUM_SHF 11
-+#define IT_FUNCNUM_SHF 8
-+#define IT_REGNUM_SHF 2
-+
-+/* Power management & PLL registers */
-+#define IT8152_PMPLL_DSR IT8152_LONG_IO(0x00)
-+#define IT8152_PMPLL_DSSR IT8152_LONG_IO(0x04)
-+#define IT8152_PMPLL_PLLCR IT8152_LONG_IO(0x20)
-+#define IT8152_PMPLL_MFSR IT8152_LONG_IO(0x24)
-+
-+/* Memory controller */
-+#define IT8152_MC_REG_OFFSET 0x100
-+
-+#define IT8152_MC_SDCR IT8152_LONG_IO(IT8152_MC_REG_OFFSET + 0x00)
-+#define IT8152_MC_PCICR IT8152_LONG_IO(IT8152_MC_REG_OFFSET + 0x04)
-+
-+/* Interrupt related definitions */
-+#define IT8152_INTC_REG_OFFSET 0x300
-+
-+#define IT8152_INTC_LDCNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x00)
-+#define IT8152_INTC_LDPNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x04)
-+#define IT8152_INTC_LDCNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x08)
-+#define IT8152_INTC_LDPNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x0C)
-+#define IT8152_INTC_LDNITR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x10)
-+#define IT8152_INTC_LDNIAR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x14)
-+#define IT8152_INTC_LPCNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x20)
-+#define IT8152_INTC_LPPNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x24)
-+#define IT8152_INTC_LPCNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x28)
-+#define IT8152_INTC_LPPNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x2C)
-+#define IT8152_INTC_LPNITR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x30)
-+#define IT8152_INTC_LPNIAR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x34)
-+#define IT8152_INTC_PDCNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x40)
-+#define IT8152_INTC_PDPNIRR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x44)
-+#define IT8152_INTC_PDCNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x48)
-+#define IT8152_INTC_PDPNIMR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x4C)
-+#define IT8152_INTC_PDNITR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x50)
-+#define IT8152_INTC_PDNIAR IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0x54)
-+#define IT8152_INTC_INTC_TYPER IT8152_LONG_IO(IT8152_INTC_REG_OFFSET + 0xFC)
-+
-+#define IT8152_UART_BASE IT8152_LONG_IO(0x200)
-+
-+#define IT8152_GPIO_REG_OFFSET 0x500
-+
-+#define IT8152_GPIO_GPLR IT8152_LONG_IO(IT8152_GPIO_REG_OFFSET)
-+#define IT8152_GPIO_GPCR12 IT8152_LONG_IO(IT8152_GPIO_REG_OFFSET + 0x04)
-+#define IT8152_GPIO_GPCR34 IT8152_LONG_IO(IT8152_GPIO_REG_OFFSET + 0x08)
-+
-+
-+/* Interrupt bit definitions */
-+#define PCISERR_BIT (1<<14)
-+#define H2PTADR_BIT (1<<13)
-+#define H2PMAR_BIT (1<<12)
-+#define PCI_INTD_BIT (1<<11)
-+#define PCI_INTC_BIT (1<<10)
-+#define PCI_INTB_BIT (1<<9)
-+#define PCI_INTA_BIT (1<<8)
-+#define CDMA_INT_BIT (1<<2)
-+#define USB_INT_BIT (1<<1)
-+#define AUDIO_INT_BIT (1<<0)
-+
-+/* IT8152 UART */
-+#define ITESER_BIT (1<<5)
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-diff --git a/include/asm-arm/pci.h b/include/asm-arm/pci.h
-index f21abd4..2cf30bf 100644
---- a/include/asm-arm/pci.h
-+++ b/include/asm-arm/pci.h
-@@ -8,10 +8,17 @@
-
- #define pcibios_scan_all_fns(a, b) 0
-
-+#ifdef CONFIG_PCI_HOST_ITE8152
-+/* ITE bridge requires setting latency timer to avoid early bus access
-+ termination by PIC bus mater devices
-+*/
-+extern void pcibios_set_master(struct pci_dev *dev);
-+#else
- static inline void pcibios_set_master(struct pci_dev *dev)
- {
- /* No special bus mastering setup handling */
- }
-+#endif
-
- static inline void pcibios_penalize_isa_irq(int irq, int active)
- {
-diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
-index 5b1c999..b4c81d5 100644
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1650,6 +1650,7 @@
- #define PCI_DEVICE_ID_ITE_8211 0x8211
- #define PCI_DEVICE_ID_ITE_8212 0x8212
- #define PCI_DEVICE_ID_ITE_8213 0x8213
-+#define PCI_DEVICE_ID_ITE_8152 0x8152
- #define PCI_DEVICE_ID_ITE_8872 0x8872
- #define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886
-
---
-1.5.1.6
-
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0005-cm-x270-pcmcia.patch b/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0005-cm-x270-pcmcia.patch
deleted file mode 100644
index 7dceff5..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0005-cm-x270-pcmcia.patch
+++ /dev/null
@@ -1,228 +0,0 @@
-From 338653da8f8afcdf8afc7e8a5a0104d5083597cc Mon Sep 17 00:00:00 2001
-From: Cliff Brake <cbrake at happy.dev.bec-systems.com>
-Date: Fri, 20 Jul 2007 19:01:27 -0400
-Subject: [PATCH] cm-x270-pcmcia
-
----
- drivers/pcmcia/Makefile | 1 +
- drivers/pcmcia/pxa2xx_cm_x270.c | 198 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 199 insertions(+), 0 deletions(-)
- create mode 100644 drivers/pcmcia/pxa2xx_cm_x270.c
-
-diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
-index 4276965..353d5b7 100644
---- a/drivers/pcmcia/Makefile
-+++ b/drivers/pcmcia/Makefile
-@@ -69,4 +69,5 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o
- pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o
- pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
- pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
-+pxa2xx_cs-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x270.o
-
-diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
-new file mode 100644
-index 0000000..25e369f
---- /dev/null
-+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
-@@ -0,0 +1,198 @@
-+/*
-+ * linux/drivers/pcmcia/pxa/pxa_armcore.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Compulab Ltd., 2003
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+
-+#include <pcmcia/ss.h>
-+#include <asm/delay.h>
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/cm-x270.h>
-+
-+#include "soc_common.h"
-+
-+
-+static struct pcmcia_irqs irqs[] = {
-+ { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
-+ { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
-+};
-+
-+
-+static int
-+cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-+{
-+ int return_val=0;
-+
-+ GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-+ GPIO_bit(GPIO49_nPWE) |
-+ GPIO_bit(GPIO50_nPIOR) |
-+ GPIO_bit(GPIO51_nPIOW) |
-+ GPIO_bit(GPIO85_nPCE_1) |
-+ GPIO_bit(GPIO54_nPCE_2);
-+
-+ pxa_gpio_mode(GPIO48_nPOE_MD);
-+ pxa_gpio_mode(GPIO49_nPWE_MD);
-+ pxa_gpio_mode(GPIO50_nPIOR_MD);
-+ pxa_gpio_mode(GPIO51_nPIOW_MD);
-+ pxa_gpio_mode(GPIO85_nPCE_1_MD);
-+ pxa_gpio_mode(GPIO54_nPCE_2_MD);
-+ //pxa_gpio_mode(GPIO79_pSKTSEL_MD); /* REVISIT: s/b dependent on num sockets (on ATX base not routed)*/
-+ pxa_gpio_mode(GPIO55_nPREG_MD);
-+ pxa_gpio_mode(GPIO56_nPWAIT_MD);
-+ pxa_gpio_mode(GPIO57_nIOIS16_MD);
-+
-+ // Reset signal
-+ GPDR(GPIO53_nPCE_2) |= GPIO_bit(GPIO53_nPCE_2);
-+ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
-+
-+ GPDR(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID));
-+ GPDR(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID));
-+
-+ set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH);
-+ set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH);
-+
-+ //irq's for slots:
-+ GPDR(IRQ_TO_GPIO(PCMCIA_S0_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S0_RDYINT));
-+ GPDR(IRQ_TO_GPIO(PCMCIA_S1_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO(PCMCIA_S1_RDYINT));
-+
-+ set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING);
-+ set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING);
-+
-+ skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
-+ return_val = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
-+
-+ return return_val;
-+}
-+
-+
-+static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
-+{
-+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
-+
-+ set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE);
-+ set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE);
-+
-+ set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE);
-+ set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE);
-+}
-+
-+
-+static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-+ struct pcmcia_state *state)
-+{
-+
-+ state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0;
-+ state->ready = (PCC_READY(skt->nr) == 0) ? 0 : 1;
-+ state->bvd1 = 1;
-+ state->bvd2 = 1;
-+ state->vs_3v = 0;
-+ state->vs_Xv = 0;
-+ state->wrprot = 0; /* not available */
-+
-+}
-+
-+
-+static int
-+cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-+ const socket_state_t *state)
-+{
-+
-+ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
-+ pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT);
-+ //pxa_gpio_mode(GPIO79_pSKTSEL_MD | GPIO_OUT); /* For 2-socket mode */
-+
-+ switch(skt->nr){
-+ case 0:
-+ if(state->flags & SS_RESET) {
-+ //GPCR(GPIO79_pSKTSEL) = GPIO_bit(GPIO79_pSKTSEL); /* For 2-socket mode */
-+ //udelay(1);
-+ GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
-+ GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
-+ udelay(10);
-+ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
-+ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
-+ }
-+ break;
-+ case 1:
-+ if(state->flags & SS_RESET) {
-+ //GPCR(GPIO79_pSKTSEL) = GPIO_bit(GPIO79_pSKTSEL); /* For 2-socket mode */
-+ //udelay(1);
-+ GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
-+ GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
-+ udelay(10);
-+ GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
-+ GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
-+ }
-+ break;
-+ }
-+
-+ pxa_gpio_mode(GPIO49_nPWE_MD);
-+ //pxa_gpio_mode(GPIO79_pSKTSEL_MD); /* For 2-socket mode */
-+
-+
-+ return 0;
-+}
-+
-+static void cmx270_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-+{
-+}
-+
-+static void cmx270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-+{
-+}
-+
-+
-+static struct pcmcia_low_level cmx270_pcmcia_ops = {
-+ .owner = THIS_MODULE,
-+ .hw_init = cmx270_pcmcia_hw_init,
-+ .hw_shutdown = cmx270_pcmcia_shutdown,
-+ .socket_state = cmx270_pcmcia_socket_state,
-+ .configure_socket = cmx270_pcmcia_configure_socket,
-+ .socket_init = cmx270_pcmcia_socket_init,
-+ .socket_suspend = cmx270_pcmcia_socket_suspend,
-+ .nr = 2,
-+};
-+
-+static struct platform_device *cmx270_pcmcia_device;
-+
-+static int __init cmx270_pcmcia_init(void)
-+{
-+ int ret;
-+
-+ cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-+
-+ if (!cmx270_pcmcia_device)
-+ return -ENOMEM;
-+
-+ cmx270_pcmcia_device->dev.platform_data = &cmx270_pcmcia_ops;
-+
-+ printk ("Registering cm-x270 PCMCIA interface.\n");
-+ ret = platform_device_add(cmx270_pcmcia_device);
-+
-+ if (ret)
-+ platform_device_put(cmx270_pcmcia_device);
-+
-+ return ret;
-+}
-+
-+static void __exit cmx270_pcmcia_exit(void)
-+{
-+ platform_device_unregister(cmx270_pcmcia_device);
-+}
-+
-+module_init(cmx270_pcmcia_init);
-+module_exit(cmx270_pcmcia_exit);
-+
-+MODULE_LICENSE("GPL");
---
-1.5.1.6
-
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0006-ramdisk_load.patch b/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0006-ramdisk_load.patch
deleted file mode 100644
index aa25dd9..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0006-ramdisk_load.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From ca4508b1266109208f62e986b51397ce2788e255 Mon Sep 17 00:00:00 2001
-From: Cliff Brake <cbrake at happy.dev.bec-systems.com>
-Date: Fri, 20 Jul 2007 19:01:50 -0400
-Subject: [PATCH] ramdisk_load
-
----
- arch/arm/mach-pxa/cm-x270.c | 6 ++++++
- include/asm-arm/arch-pxa/cm-x270.h | 2 ++
- init/initramfs.c | 16 ++++++++++++++++
- 3 files changed, 24 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
-index 88b080d..c6ec489 100644
---- a/arch/arm/mach-pxa/cm-x270.c
-+++ b/arch/arm/mach-pxa/cm-x270.c
-@@ -308,6 +308,12 @@ static struct map_desc cmx270_io_desc[] __initdata = {
- .length = PXA_CS_SIZE,
- .type = MT_DEVICE
- },
-+ [2] = { /* NOR flash */
-+ .virtual = CMX270_FLASH_VIRT,
-+ .pfn = __phys_to_pfn(PXA_CS0_PHYS),
-+ .length = (8<<20), /* up to 8 MByte flash */
-+ .type = MT_DEVICE
-+ },
- };
-
- /*
-diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h
-index 24613a5..aad152e 100644
---- a/include/asm-arm/arch-pxa/cm-x270.h
-+++ b/include/asm-arm/arch-pxa/cm-x270.h
-@@ -20,7 +20,9 @@
-
- #define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
- #define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + PXA_CS_SIZE)
-+#define CMX270_FLASH_VIRT (CMX270_IDE104_VIRT + PXA_CS_SIZE)
-
-+#define CMX270_FLASH_RAMDISK_VIRT (CMX270_FLASH_VIRT + 0x1c0000)
-
- /* GPIO related definitions */
- #define GPIO_IT8152_IRQ (22)
-diff --git a/init/initramfs.c b/init/initramfs.c
-index 00eff7a..0ecd40b 100644
---- a/init/initramfs.c
-+++ b/init/initramfs.c
-@@ -7,6 +7,9 @@
- #include <linux/string.h>
- #include <linux/syscalls.h>
-
-+// HACK for compulab cm-x270
-+#include <asm/arch/cm-x270.h>
-+
- static __initdata char *message;
- static void __init error(char *x)
- {
-@@ -550,7 +553,20 @@ static int __init populate_rootfs(void)
- #ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start) {
- #ifdef CONFIG_BLK_DEV_RAM
-+
-+ /* hack to make initramfs work because the
-+ * compulab BL does not zero out the
-+ * initrd memory. This only seems to affect loading
-+ * initramfs (cpio.gz) archives. Does not seem to
-+ * affect ramdisks.
-+ */
-+ int initrd_size = *(int *)(CMX270_FLASH_RAMDISK_VIRT);
- int fd;
-+
-+ initrd_end = initrd_start + initrd_size;
-+ //printk("CLIFF: initrd_start = 0x%x\n", initrd_start);
-+ //printk("CLIFF: initrd_end = 0x%x\n", initrd_end);
-+
- printk(KERN_INFO "checking if image is initramfs...");
- err = unpack_to_rootfs((char *)initrd_start,
- initrd_end - initrd_start, 1);
---
-1.5.1.6
-
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0007-mmcsd_large_cards-r0.patch b/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0007-mmcsd_large_cards-r0.patch
deleted file mode 100644
index 90e66b5..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0007-mmcsd_large_cards-r0.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 26638b93f7479dc597a58e2e2b2832c6ff4c8f7b Mon Sep 17 00:00:00 2001
-From: Cliff Brake <cbrake at happy.dev.bec-systems.com>
-Date: Fri, 20 Jul 2007 19:02:55 -0400
-Subject: [PATCH] mmcsd_large_cards-r0
-
----
- drivers/mmc/card/block.c | 6 ++++++
- 1 files changed, 6 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
-index 540ff4b..1f8d67d 100644
---- a/drivers/mmc/card/block.c
-+++ b/drivers/mmc/card/block.c
-@@ -403,6 +403,7 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
- {
- struct mmc_blk_data *md;
- int devidx, ret;
-+ unsigned long cap;
-
- devidx = find_first_zero_bit(dev_use, MMC_NUM_MINORS);
- if (devidx >= MMC_NUM_MINORS)
-@@ -467,6 +468,11 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
-
- sprintf(md->disk->disk_name, "mmcblk%d", devidx);
-
-+ if (card->csd.read_blkbits > 9)
-+ md->block_bits = 9;
-+ else
-+ md->block_bits = card->csd.read_blkbits;
-+
- blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits);
-
- if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) {
---
-1.5.1.6
-
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0008-cm-x270-nand-simplify-name.patch b/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0008-cm-x270-nand-simplify-name.patch
deleted file mode 100644
index c07f049..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/0008-cm-x270-nand-simplify-name.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From e1a243564a40d7542a62d4684f2e6ce0b95fa267 Mon Sep 17 00:00:00 2001
-From: Cliff Brake <cbrake at happy.dev.bec-systems.com>
-Date: Fri, 20 Jul 2007 19:04:12 -0400
-Subject: [PATCH] cm-x270-nand-simplify-name
-
----
- drivers/mtd/nand/cmx270_nand.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
-index cb663ef..3654ce4 100644
---- a/drivers/mtd/nand/cmx270_nand.c
-+++ b/drivers/mtd/nand/cmx270_nand.c
-@@ -191,6 +191,8 @@ static int cmx270_init(void)
- cmx270_nand_mtd->owner = THIS_MODULE;
- cmx270_nand_mtd->priv = this;
-
-+ cmx270_nand_mtd->name = "cm-x270-nand";
-+
- /* insert callbacks */
- this->IO_ADDR_R = cmx270_nand_io;
- this->IO_ADDR_W = cmx270_nand_io;
---
-1.5.1.6
-
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/16bpp.patch b/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/16bpp.patch
deleted file mode 100644
index 6f038e3..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/16bpp.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: linux-2.6.23/arch/arm/mach-pxa/cm-x270.c
-===================================================================
---- linux-2.6.23.orig/arch/arm/mach-pxa/cm-x270.c 2008-02-14 20:32:28.000000000 +0000
-+++ linux-2.6.23/arch/arm/mach-pxa/cm-x270.c 2008-02-14 20:27:55.000000000 +0000
-@@ -383,7 +383,7 @@
-
- static struct pxafb_mode_info generic_crt_640x480_mode = {
- .pixclock = 38461,
-- .bpp = 8,
-+ .bpp = 16,
- .xres = 640,
- .yres = 480,
- .hsync_len = 63,
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/defconfig b/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/defconfig
deleted file mode 100644
index 273de85..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/cm-x270/defconfig
+++ /dev/null
@@ -1,1204 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 11 15:47:57 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION="-cm-x270"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-CONFIG_MACH_ARMCORE=y
-CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS1,38400 monitor=8 bpp=16 mem=64M mtdparts=physmap-flash.0:256k(boot)ro,0x180000(kernel),-(root);cm-x270-nand:64m(app),-(data) rdinit=/sbin/init root=mtd3 rootfstype=jffs2"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-CONFIG_MTD_NAND_CM_X270=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-CONFIG_DM9000=y
-CONFIG_DM9000_NOEPROM=y
-# CONFIG_SMC911X is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_PS2_ALPS is not set
-# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
-# CONFIG_MOUSE_PS2_SYNAPTICS is not set
-# CONFIG_MOUSE_PS2_LIFEBOOK is not set
-# CONFIG_MOUSE_PS2_TRACKPOINT is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=m
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_CM_X270=y
-# CONFIG_LEDS_GPIO is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=m
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/em-x270/defconfig b/meta/recipes-kernel/linux/linux-2.6.23/em-x270/defconfig
deleted file mode 100644
index 3246136..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/em-x270/defconfig
+++ /dev/null
@@ -1,1354 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc9
-# Tue Oct 9 11:19:21 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION="-em-x270"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_MACH_EM_X270=y
-CONFIG_PXA27x=y
-CONFIG_PXA_PWR_I2C=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
-CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-CONFIG_BT_HCIUART=m
-# CONFIG_BT_HCIUART_H4 is not set
-# CONFIG_BT_HCIUART_BCSP is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
-CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_LEDS is not set
-CONFIG_MAC80211_DEBUGFS=y
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x100000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=12000
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-CONFIG_DM9000=y
-# CONFIG_SMC911X is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-CONFIG_PPPOL2TP=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_WM97XX=y
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-CONFIG_DA9030=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-CONFIG_APM_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_EM_X270 is not set
-# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_EM_X270=m
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-CONFIG_SND_SOC_AC97_BUS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_PXA2XX_SOC_AC97=y
-CONFIG_SND_PXA2XX_SOC_EM_X270=y
-
-#
-# SoC Audio support for SuperH
-#
-CONFIG_SND_SOC_WM9712=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_PXA=y
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_SA1100=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/em-x270/em-x270-battery-sysfs-fix.patch b/meta/recipes-kernel/linux/linux-2.6.23/em-x270/em-x270-battery-sysfs-fix.patch
deleted file mode 100644
index 51ec773..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/em-x270/em-x270-battery-sysfs-fix.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-Index: linux-2.6.23/arch/arm/mach-pxa/em-x270-pm.c
-===================================================================
---- linux-2.6.23.orig/arch/arm/mach-pxa/em-x270-pm.c 2008-02-21 14:30:06.000000000 +0000
-+++ linux-2.6.23/arch/arm/mach-pxa/em-x270-pm.c 2008-02-21 14:59:24.000000000 +0000
-@@ -461,6 +461,9 @@
- else {
- val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
- }
-+ }
-+ else {
-+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
- }
- }
- else {
-@@ -547,8 +550,9 @@
- pr_debug("%s: MODEL = %s\n", __FUNCTION__, val->strval);
- break;
- default: break;
-+ return -1;
- }
--
-+
- return 0;
- }
-
-Index: linux-2.6.23/drivers/power/em_x270_battery.c
-===================================================================
---- linux-2.6.23.orig/drivers/power/em_x270_battery.c 2008-02-21 12:21:53.000000000 +0000
-+++ linux-2.6.23/drivers/power/em_x270_battery.c 2008-02-21 15:00:51.000000000 +0000
-@@ -418,8 +418,9 @@
- pr_debug("%s: MODEL = %s\n", __FUNCTION__, val->strval);
- break;
- default: break;
-+ return -1;
- }
--
-+
- return 0;
- }
-
diff --git a/meta/recipes-kernel/linux/linux-2.6.23/em-x270/em-x270.patch b/meta/recipes-kernel/linux/linux-2.6.23/em-x270/em-x270.patch
deleted file mode 100644
index 3c28be8..0000000
--- a/meta/recipes-kernel/linux/linux-2.6.23/em-x270/em-x270.patch
+++ /dev/null
@@ -1,12063 +0,0 @@
- arch/arm/Kconfig | 13 +-
- arch/arm/configs/em_x270_defconfig | 367 +++--
- arch/arm/mach-pxa/Kconfig | 8 +
- arch/arm/mach-pxa/Makefile | 9 +-
- arch/arm/mach-pxa/cpu-pxa.c | 442 ++++++
- arch/arm/mach-pxa/em-x270-devices.c | 331 +++++
- arch/arm/mach-pxa/em-x270-lcd.c | 223 +++
- arch/arm/mach-pxa/em-x270-pm.c | 892 ++++++++++++
- arch/arm/mach-pxa/em-x270.c | 127 ++-
- arch/arm/mach-pxa/pwr-i2c.c | 539 +++++++
- arch/arm/mach-pxa/pxa27x.c | 6 +-
- arch/arm/mach-pxa/spitz.c | 27 +
- drivers/i2c/chips/Kconfig | 13 +
- drivers/i2c/chips/Makefile | 1 +
- drivers/i2c/chips/da9030.c | 1213 ++++++++++++++++
- drivers/i2c/chips/da9030.h | 282 ++++
- drivers/input/touchscreen/Kconfig | 43 +
- drivers/input/touchscreen/Makefile | 14 +
- drivers/input/touchscreen/wm9705.c | 360 +++++
- drivers/input/touchscreen/wm9712.c | 464 ++++++
- drivers/input/touchscreen/wm9713.c | 461 ++++++
- drivers/input/touchscreen/wm97xx-core.c | 859 +++++++++++
- drivers/leds/Kconfig | 6 +
- drivers/leds/Makefile | 1 +
- drivers/leds/leds-em-x270.c | 99 ++
- drivers/mtd/chips/jedec_probe.c | 58 +-
- drivers/net/dm9000.c | 1 +
- drivers/power/Kconfig | 6 +
- drivers/power/Makefile | 1 +
- drivers/power/em_x270_battery.c | 579 ++++++++
- drivers/usb/gadget/Kconfig | 20 +
- drivers/usb/gadget/Makefile | 1 +
- drivers/usb/gadget/epautoconf.c | 9 +-
- drivers/usb/gadget/ether.c | 63 +-
- drivers/usb/gadget/file_storage.c | 11 +-
- drivers/usb/gadget/pxa27x_udc.c | 2387 +++++++++++++++++++++++++++++++
- drivers/usb/gadget/pxa27x_udc.h | 298 ++++
- drivers/usb/gadget/pxa2xx_udc.h | 7 +-
- drivers/usb/gadget/serial.c | 18 +-
- drivers/usb/gadget/zero.c | 13 +-
- drivers/video/backlight/Kconfig | 2 +-
- include/asm-arm/arch-pxa/pwr-i2c.h | 61 +
- include/linux/da9030.h | 118 ++
- include/linux/usb_gadget.h | 23 +-
- include/linux/wm97xx.h | 291 ++++
- sound/soc/pxa/Kconfig | 9 +
- sound/soc/pxa/Makefile | 2 +
- sound/soc/pxa/em-x270.c | 137 ++
- 48 files changed, 10742 insertions(+), 173 deletions(-)
-
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index 691aae3..cf1dbc2 100644
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -858,7 +858,7 @@ config KEXEC
-
- endmenu
-
--if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
-+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
-
- menu "CPU Frequency scaling"
-
-@@ -894,6 +894,15 @@ config CPU_FREQ_IMX
-
- If in doubt, say N.
-
-+config CPU_FREQ_PXA
-+ tristate "CPUfreq driver for PXA2xx CPUs"
-+ depends on CPU_FREQ && ARCH_PXA
-+ default y
-+ help
-+ Thes enables the CPUfreq driver for PXA2xx CPUs.
-+
-+ If in doubt, say Y.
-+
- endmenu
-
- endif
-@@ -1029,6 +1038,8 @@ source "drivers/spi/Kconfig"
-
- source "drivers/w1/Kconfig"
-
-+source "drivers/power/Kconfig"
-+
- source "drivers/hwmon/Kconfig"
-
- #source "drivers/l3/Kconfig"
-diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig
-index 6bea090..3246136 100644
---- a/arch/arm/configs/em_x270_defconfig
-+++ b/arch/arm/configs/em_x270_defconfig
-@@ -1,13 +1,13 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.22
--# Mon Jul 9 15:18:20 2007
-+# Linux kernel version: 2.6.23-rc9
-+# Tue Oct 9 11:19:21 2007
- #
- CONFIG_ARM=y
- CONFIG_SYS_SUPPORTS_APM_EMULATION=y
- CONFIG_GENERIC_GPIO=y
- CONFIG_GENERIC_TIME=y
--# CONFIG_GENERIC_CLOCKEVENTS is not set
-+CONFIG_GENERIC_CLOCKEVENTS=y
- CONFIG_MMU=y
- # CONFIG_NO_IOPORT is not set
- CONFIG_GENERIC_HARDIRQS=y
-@@ -27,25 +27,20 @@ CONFIG_VECTORS_BASE=0xffff0000
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
--# Code maturity level options
-+# General setup
- #
- CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
--
--#
--# General setup
--#
- CONFIG_LOCALVERSION="-em-x270"
- # CONFIG_LOCALVERSION_AUTO is not set
- CONFIG_SWAP=y
- CONFIG_SYSVIPC=y
--# CONFIG_IPC_NS is not set
- CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
--# CONFIG_UTS_NS is not set
-+# CONFIG_USER_NS is not set
- # CONFIG_AUDIT is not set
- CONFIG_IKCONFIG=y
- CONFIG_IKCONFIG_PROC=y
-@@ -71,34 +66,27 @@ CONFIG_FUTEX=y
- CONFIG_ANON_INODES=y
- CONFIG_EPOLL=y
- CONFIG_SIGNALFD=y
--CONFIG_TIMERFD=y
- CONFIG_EVENTFD=y
- CONFIG_SHMEM=y
- CONFIG_VM_EVENT_COUNTERS=y
--CONFIG_SLAB=y
--# CONFIG_SLUB is not set
-+CONFIG_SLUB_DEBUG=y
-+# CONFIG_SLAB is not set
-+CONFIG_SLUB=y
- # CONFIG_SLOB is not set
- CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
--
--#
--# Loadable module support
--#
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
- CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
- CONFIG_KMOD=y
--
--#
--# Block layer
--#
- CONFIG_BLOCK=y
- # CONFIG_LBD is not set
- # CONFIG_BLK_DEV_IO_TRACE is not set
- # CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-
- #
- # IO Schedulers
-@@ -139,6 +127,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
- # CONFIG_ARCH_L7200 is not set
- # CONFIG_ARCH_KS8695 is not set
- # CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_MXC is not set
- # CONFIG_ARCH_PNX4008 is not set
- CONFIG_ARCH_PXA=y
- # CONFIG_ARCH_RPC is not set
-@@ -160,6 +149,15 @@ CONFIG_ARCH_PXA=y
- # CONFIG_MACH_TRIZEPS4 is not set
- CONFIG_MACH_EM_X270=y
- CONFIG_PXA27x=y
-+CONFIG_PXA_PWR_I2C=y
-+
-+#
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-
- #
- # Processor Type
-@@ -185,6 +183,7 @@ CONFIG_XSCALE_PMU=y
- #
- # Bus support
- #
-+# CONFIG_PCI_SYSCALL is not set
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-
- #
-@@ -196,8 +195,9 @@ CONFIG_XSCALE_PMU=y
- # Kernel Features
- #
- # CONFIG_TICK_ONESHOT is not set
-+# CONFIG_NO_HZ is not set
-+# CONFIG_HIGH_RES_TIMERS is not set
- # CONFIG_PREEMPT is not set
--# CONFIG_NO_IDLE_HZ is not set
- CONFIG_HZ=100
- CONFIG_AEABI=y
- CONFIG_OABI_COMPAT=y
-@@ -212,6 +212,8 @@ CONFIG_FLAT_NODE_MEM_MAP=y
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
- CONFIG_ZONE_DMA_FLAG=1
-+CONFIG_BOUNCE=y
-+CONFIG_VIRT_TO_BUS=y
- CONFIG_ALIGNMENT_TRAP=y
-
- #
-@@ -219,11 +221,28 @@ CONFIG_ALIGNMENT_TRAP=y
- #
- CONFIG_ZBOOT_ROM_TEXT=0x0
- CONFIG_ZBOOT_ROM_BSS=0x0
--CONFIG_CMDLINE=""
-+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200"
- # CONFIG_XIP_KERNEL is not set
- # CONFIG_KEXEC is not set
-
- #
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=y
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-+CONFIG_CPU_FREQ_GOV_USERSPACE=m
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-+CONFIG_CPU_FREQ_PXA=y
-+
-+#
- # Floating point emulation
- #
-
-@@ -238,8 +257,8 @@ CONFIG_FPE_NWFPE=y
- # Userspace binary formats
- #
- CONFIG_BINFMT_ELF=y
--# CONFIG_BINFMT_AOUT is not set
--# CONFIG_BINFMT_MISC is not set
-+CONFIG_BINFMT_AOUT=m
-+CONFIG_BINFMT_MISC=m
-
- #
- # Power management options
-@@ -247,8 +266,10 @@ CONFIG_BINFMT_ELF=y
- CONFIG_PM=y
- CONFIG_PM_LEGACY=y
- # CONFIG_PM_DEBUG is not set
--# CONFIG_PM_SYSFS_DEPRECATED is not set
--CONFIG_APM_EMULATION=m
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND_UP_POSSIBLE=y
-+CONFIG_SUSPEND=y
-+CONFIG_APM_EMULATION=y
-
- #
- # Networking
-@@ -316,6 +337,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
- # QoS and/or fair queueing
- #
- # CONFIG_NET_SCHED is not set
-+CONFIG_NET_SCH_FIFO=y
-
- #
- # Network testing
-@@ -350,9 +372,12 @@ CONFIG_BT_HCIBFUSB=m
- #
- # Wireless
- #
--# CONFIG_CFG80211 is not set
--# CONFIG_WIRELESS_EXT is not set
--# CONFIG_MAC80211 is not set
-+CONFIG_CFG80211=m
-+CONFIG_WIRELESS_EXT=y
-+CONFIG_MAC80211=m
-+# CONFIG_MAC80211_LEDS is not set
-+CONFIG_MAC80211_DEBUGFS=y
-+# CONFIG_MAC80211_DEBUG is not set
- CONFIG_IEEE80211=m
- # CONFIG_IEEE80211_DEBUG is not set
- CONFIG_IEEE80211_CRYPT_WEP=m
-@@ -360,6 +385,7 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
- # CONFIG_IEEE80211_CRYPT_TKIP is not set
- # CONFIG_IEEE80211_SOFTMAC is not set
- # CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-
- #
- # Device Drivers
-@@ -374,10 +400,6 @@ CONFIG_FW_LOADER=y
- # CONFIG_DEBUG_DRIVER is not set
- # CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
--
--#
--# Connector - unified userspace <-> kernelspace linker
--#
- # CONFIG_CONNECTOR is not set
- CONFIG_MTD=y
- # CONFIG_MTD_DEBUG is not set
-@@ -402,11 +424,10 @@ CONFIG_MTD_BLOCK=y
- #
- # RAM/ROM/Flash chip drivers
- #
--# CONFIG_MTD_CFI is not set
--# CONFIG_MTD_JEDECPROBE is not set
--# CONFIG_MTD_CFI_NOSWAP is not set
--# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
--# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-+CONFIG_MTD_CFI=y
-+CONFIG_MTD_JEDECPROBE=y
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
- CONFIG_MTD_MAP_BANK_WIDTH_1=y
- CONFIG_MTD_MAP_BANK_WIDTH_2=y
- CONFIG_MTD_MAP_BANK_WIDTH_4=y
-@@ -417,14 +438,25 @@ CONFIG_MTD_CFI_I1=y
- CONFIG_MTD_CFI_I2=y
- # CONFIG_MTD_CFI_I4 is not set
- # CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+CONFIG_MTD_CFI_AMDSTD=y
-+CONFIG_MTD_CFI_STAA=y
-+CONFIG_MTD_CFI_UTIL=y
- # CONFIG_MTD_RAM is not set
- # CONFIG_MTD_ROM is not set
- # CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_XIP is not set
-
- #
- # Mapping drivers for chip access
- #
- # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0x0
-+CONFIG_MTD_PHYSMAP_LEN=0x100000
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-+# CONFIG_MTD_ARM_INTEGRATOR is not set
-+# CONFIG_MTD_IMPA7 is not set
- # CONFIG_MTD_SHARP_SL is not set
- # CONFIG_MTD_PLATRAM is not set
-
-@@ -457,21 +489,17 @@ CONFIG_MTD_NAND_PLATFORM=y
- #
- # UBI - Unsorted block images
- #
--# CONFIG_MTD_UBI is not set
-+CONFIG_MTD_UBI=m
-+CONFIG_MTD_UBI_WL_THRESHOLD=4096
-+CONFIG_MTD_UBI_BEB_RESERVE=1
-+CONFIG_MTD_UBI_GLUEBI=y
-
- #
--# Parallel port support
-+# UBI debugging options
- #
-+# CONFIG_MTD_UBI_DEBUG is not set
- # CONFIG_PARPORT is not set
--
--#
--# Plug and Play support
--#
--# CONFIG_PNPACPI is not set
--
--#
--# Block devices
--#
-+CONFIG_BLK_DEV=y
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-@@ -490,6 +518,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- #
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
- # CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
- # CONFIG_SCSI_PROC_FS is not set
-@@ -519,36 +548,23 @@ CONFIG_SCSI_WAIT_SCAN=m
- # CONFIG_SCSI_SPI_ATTRS is not set
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
--# CONFIG_SCSI_SAS_ATTRS is not set
- # CONFIG_SCSI_SAS_LIBSAS is not set
--
--#
--# SCSI low-level drivers
--#
-+CONFIG_SCSI_LOWLEVEL=y
- # CONFIG_ISCSI_TCP is not set
- # CONFIG_SCSI_DEBUG is not set
- # CONFIG_ATA is not set
--
--#
--# Multi-device support (RAID and LVM)
--#
- # CONFIG_MD is not set
--
--#
--# Network device support
--#
- CONFIG_NETDEVICES=y
-+# CONFIG_NETDEVICES_MULTIQUEUE is not set
- # CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
- # CONFIG_EQUALIZER is not set
- # CONFIG_TUN is not set
- # CONFIG_PHYLIB is not set
--
--#
--# Ethernet (10 or 100Mbit)
--#
- CONFIG_NET_ETHERNET=y
- CONFIG_MII=y
-+# CONFIG_AX88796 is not set
- # CONFIG_SMC91X is not set
- CONFIG_DM9000=y
- # CONFIG_SMC911X is not set
-@@ -571,16 +587,22 @@ CONFIG_DM9000=y
- # CONFIG_USB_USBNET_MII is not set
- # CONFIG_USB_USBNET is not set
- # CONFIG_WAN is not set
--# CONFIG_PPP is not set
-+CONFIG_PPP=m
-+# CONFIG_PPP_MULTILINK is not set
-+# CONFIG_PPP_FILTER is not set
-+CONFIG_PPP_ASYNC=m
-+CONFIG_PPP_SYNC_TTY=m
-+CONFIG_PPP_DEFLATE=m
-+CONFIG_PPP_BSDCOMP=m
-+CONFIG_PPP_MPPE=m
-+# CONFIG_PPPOE is not set
-+CONFIG_PPPOL2TP=m
- # CONFIG_SLIP is not set
-+CONFIG_SLHC=m
- # CONFIG_SHAPER is not set
- # CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
--
--#
--# ISDN subsystem
--#
- # CONFIG_ISDN is not set
-
- #
-@@ -612,16 +634,21 @@ CONFIG_INPUT_KEYBOARD=y
- # CONFIG_KEYBOARD_XTKBD is not set
- # CONFIG_KEYBOARD_NEWTON is not set
- # CONFIG_KEYBOARD_STOWAWAY is not set
--CONFIG_KEYBOARD_PXA27x=m
-+CONFIG_KEYBOARD_PXA27x=y
- # CONFIG_KEYBOARD_GPIO is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
- # CONFIG_INPUT_TABLET is not set
- CONFIG_INPUT_TOUCHSCREEN=y
-+# CONFIG_TOUCHSCREEN_FUJITSU is not set
- # CONFIG_TOUCHSCREEN_GUNZE is not set
- # CONFIG_TOUCHSCREEN_ELO is not set
- # CONFIG_TOUCHSCREEN_MTOUCH is not set
- # CONFIG_TOUCHSCREEN_MK712 is not set
-+CONFIG_TOUCHSCREEN_WM97XX=y
-+# CONFIG_TOUCHSCREEN_WM9705 is not set
-+CONFIG_TOUCHSCREEN_WM9712=y
-+# CONFIG_TOUCHSCREEN_WM9713 is not set
- # CONFIG_TOUCHSCREEN_PENMOUNT is not set
- # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
- # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-@@ -660,58 +687,91 @@ CONFIG_SERIAL_PXA_CONSOLE=y
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
- CONFIG_UNIX98_PTYS=y
--CONFIG_LEGACY_PTYS=y
--CONFIG_LEGACY_PTY_COUNT=256
--
--#
--# IPMI
--#
-+# CONFIG_LEGACY_PTYS is not set
- # CONFIG_IPMI_HANDLER is not set
- # CONFIG_WATCHDOG is not set
- CONFIG_HW_RANDOM=m
- # CONFIG_NVRAM is not set
- # CONFIG_R3964 is not set
- # CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+# CONFIG_I2C_CHARDEV is not set
-
- #
--# TPM devices
-+# I2C Algorithms
- #
--# CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-
- #
--# SPI support
-+# I2C Hardware Bus support
- #
--# CONFIG_SPI is not set
--# CONFIG_SPI_MASTER is not set
-+# CONFIG_I2C_GPIO is not set
-+CONFIG_I2C_PXA=y
-+# CONFIG_I2C_PXA_SLAVE is not set
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_TINY_USB is not set
-
- #
--# Dallas's 1-wire bus
-+# Miscellaneous I2C Chip support
- #
--# CONFIG_W1 is not set
--# CONFIG_HWMON is not set
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_DS1682 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+CONFIG_DA9030=y
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-
- #
--# Misc devices
-+# SPI support
- #
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+# CONFIG_W1 is not set
-+CONFIG_POWER_SUPPLY=y
-+# CONFIG_POWER_SUPPLY_DEBUG is not set
-+# CONFIG_PDA_POWER is not set
-+CONFIG_APM_POWER=y
-+# CONFIG_BATTERY_DS2760 is not set
-+# CONFIG_BATTERY_EM_X270 is not set
-+# CONFIG_HWMON is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_EEPROM_93CX6 is not set
-
- #
- # Multifunction device drivers
- #
- # CONFIG_MFD_SM501 is not set
--
--#
--# LED devices
--#
--# CONFIG_NEW_LEDS is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
-
- #
- # LED drivers
- #
-+CONFIG_LEDS_GPIO=m
-+CONFIG_LEDS_EM_X270=m
-
- #
- # LED Triggers
- #
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-
- #
- # Multimedia devices
-@@ -723,13 +783,17 @@ CONFIG_HW_RANDOM=m
- #
- # Graphics support
- #
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_BACKLIGHT_CLASS_DEVICE=y
-+CONFIG_BACKLIGHT_CORGI=y
-
- #
- # Display device support
- #
- # CONFIG_DISPLAY_SUPPORT is not set
- # CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
- CONFIG_FB=y
- # CONFIG_FIRMWARE_EDID is not set
- # CONFIG_FB_DDC is not set
-@@ -752,7 +816,7 @@ CONFIG_FB_DEFERRED_IO=y
- #
- # CONFIG_FB_S1D13XXX is not set
- CONFIG_FB_PXA=y
--# CONFIG_FB_PXA_PARAMETERS is not set
-+CONFIG_FB_PXA_PARAMETERS=y
- # CONFIG_FB_MBX is not set
- # CONFIG_FB_VIRTUAL is not set
-
-@@ -762,6 +826,7 @@ CONFIG_FB_PXA=y
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
- CONFIG_FRAMEBUFFER_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
- # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
- # CONFIG_FONTS is not set
- CONFIG_FONT_8x8=y
-@@ -774,18 +839,18 @@ CONFIG_LOGO_LINUX_CLUT224=y
- #
- # Sound
- #
--CONFIG_SOUND=m
-+CONFIG_SOUND=y
-
- #
- # Advanced Linux Sound Architecture
- #
--CONFIG_SND=m
--CONFIG_SND_TIMER=m
--CONFIG_SND_PCM=m
-+CONFIG_SND=y
-+CONFIG_SND_TIMER=y
-+CONFIG_SND_PCM=y
- # CONFIG_SND_SEQUENCER is not set
- CONFIG_SND_OSSEMUL=y
--CONFIG_SND_MIXER_OSS=m
--CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_MIXER_OSS=y
-+CONFIG_SND_PCM_OSS=y
- CONFIG_SND_PCM_OSS_PLUGINS=y
- # CONFIG_SND_DYNAMIC_MINORS is not set
- CONFIG_SND_SUPPORT_OLD_API=y
-@@ -817,17 +882,23 @@ CONFIG_SND_PXA2XX_AC97=m
- #
- # System on Chip audio support
- #
--# CONFIG_SND_SOC is not set
-+CONFIG_SND_SOC_AC97_BUS=y
-+CONFIG_SND_SOC=y
-+CONFIG_SND_PXA2XX_SOC=y
-+CONFIG_SND_PXA2XX_SOC_AC97=y
-+CONFIG_SND_PXA2XX_SOC_EM_X270=y
-
- #
--# Open Sound System
-+# SoC Audio support for SuperH
- #
--# CONFIG_SOUND_PRIME is not set
--CONFIG_AC97_BUS=m
-+CONFIG_SND_SOC_WM9712=y
-
- #
--# HID Devices
-+# Open Sound System
- #
-+# CONFIG_SOUND_PRIME is not set
-+CONFIG_AC97_BUS=y
-+CONFIG_HID_SUPPORT=y
- CONFIG_HID=y
- # CONFIG_HID_DEBUG is not set
-
-@@ -838,10 +909,7 @@ CONFIG_USB_HID=y
- # CONFIG_USB_HIDINPUT_POWERBOOK is not set
- # CONFIG_HID_FF is not set
- # CONFIG_USB_HIDDEV is not set
--
--#
--# USB support
--#
-+CONFIG_USB_SUPPORT=y
- CONFIG_USB_ARCH_HAS_HCD=y
- CONFIG_USB_ARCH_HAS_OHCI=y
- # CONFIG_USB_ARCH_HAS_EHCI is not set
-@@ -855,6 +923,7 @@ CONFIG_USB_DEVICEFS=y
- # CONFIG_USB_DEVICE_CLASS is not set
- # CONFIG_USB_DYNAMIC_MINORS is not set
- # CONFIG_USB_SUSPEND is not set
-+# CONFIG_USB_PERSIST is not set
- # CONFIG_USB_OTG is not set
-
- #
-@@ -866,12 +935,13 @@ CONFIG_USB_OHCI_HCD=y
- # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-
- #
- # USB Device Class drivers
- #
--# CONFIG_USB_ACM is not set
--# CONFIG_USB_PRINTER is not set
-+CONFIG_USB_ACM=m
-+CONFIG_USB_PRINTER=m
-
- #
- # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-@@ -896,8 +966,8 @@ CONFIG_USB_STORAGE=y
- #
- # USB Imaging devices
- #
--# CONFIG_USB_MDC800 is not set
--# CONFIG_USB_MICROTEK is not set
-+CONFIG_USB_MDC800=m
-+CONFIG_USB_MICROTEK=m
- # CONFIG_USB_MON is not set
-
- #
-@@ -940,25 +1010,25 @@ CONFIG_USB_STORAGE=y
- # USB Gadget Support
- #
- # CONFIG_USB_GADGET is not set
--CONFIG_MMC=m
-+CONFIG_MMC=y
- # CONFIG_MMC_DEBUG is not set
--# CONFIG_MMC_UNSAFE_RESUME is not set
-+CONFIG_MMC_UNSAFE_RESUME=y
-
- #
- # MMC/SD Card Drivers
- #
--CONFIG_MMC_BLOCK=m
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-
- #
- # MMC/SD Host Controller Drivers
- #
--CONFIG_MMC_PXA=m
--
--#
--# Real Time Clock
--#
-+CONFIG_MMC_PXA=y
- CONFIG_RTC_LIB=y
--CONFIG_RTC_CLASS=m
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-+# CONFIG_RTC_DEBUG is not set
-
- #
- # RTC interfaces
-@@ -972,6 +1042,15 @@ CONFIG_RTC_INTF_DEV=y
- #
- # I2C RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-
- #
- # SPI RTC drivers
-@@ -982,14 +1061,29 @@ CONFIG_RTC_INTF_DEV=y
- #
- # CONFIG_RTC_DRV_CMOS is not set
- # CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
- # CONFIG_RTC_DRV_DS1742 is not set
- # CONFIG_RTC_DRV_M48T86 is not set
--CONFIG_RTC_DRV_V3020=m
-+# CONFIG_RTC_DRV_M48T59 is not set
-+CONFIG_RTC_DRV_V3020=y
-
- #
- # on-CPU RTC drivers
- #
--CONFIG_RTC_DRV_SA1100=m
-+CONFIG_RTC_DRV_SA1100=y
-+
-+#
-+# DMA Engine support
-+#
-+# CONFIG_DMA_ENGINE is not set
-+
-+#
-+# DMA Clients
-+#
-+
-+#
-+# DMA Devices
-+#
-
- #
- # File systems
-@@ -1098,7 +1192,6 @@ CONFIG_SMB_FS=y
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
--# CONFIG_9P_FS is not set
-
- #
- # Partition Types
-@@ -1167,20 +1260,22 @@ CONFIG_NLS_UTF8=y
- CONFIG_ENABLE_MUST_CHECK=y
- CONFIG_MAGIC_SYSRQ=y
- # CONFIG_UNUSED_SYMBOLS is not set
--# CONFIG_DEBUG_FS is not set
-+CONFIG_DEBUG_FS=y
- # CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
- # CONFIG_DEBUG_SHIRQ is not set
- # CONFIG_DETECT_SOFTLOCKUP is not set
-+CONFIG_SCHED_DEBUG=y
- # CONFIG_SCHEDSTATS is not set
- # CONFIG_TIMER_STATS is not set
--# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_SLUB_DEBUG_ON is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
- # CONFIG_DEBUG_LOCK_ALLOC is not set
- # CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
-@@ -1202,10 +1297,6 @@ CONFIG_DEBUG_LL=y
- #
- # CONFIG_KEYS is not set
- # CONFIG_SECURITY is not set
--
--#
--# Cryptographic options
--#
- CONFIG_CRYPTO=y
- CONFIG_CRYPTO_ALGAPI=m
- CONFIG_CRYPTO_BLKCIPHER=m
-@@ -1215,7 +1306,7 @@ CONFIG_CRYPTO_MANAGER=m
- # CONFIG_CRYPTO_NULL is not set
- # CONFIG_CRYPTO_MD4 is not set
- # CONFIG_CRYPTO_MD5 is not set
--# CONFIG_CRYPTO_SHA1 is not set
-+CONFIG_CRYPTO_SHA1=m
- # CONFIG_CRYPTO_SHA256 is not set
- # CONFIG_CRYPTO_SHA512 is not set
- # CONFIG_CRYPTO_WP512 is not set
-@@ -1243,19 +1334,17 @@ CONFIG_CRYPTO_ARC4=m
- # CONFIG_CRYPTO_CRC32C is not set
- # CONFIG_CRYPTO_CAMELLIA is not set
- # CONFIG_CRYPTO_TEST is not set
--
--#
--# Hardware crypto devices
--#
-+CONFIG_CRYPTO_HW=y
-
- #
- # Library routines
- #
- CONFIG_BITREVERSE=y
--# CONFIG_CRC_CCITT is not set
-+CONFIG_CRC_CCITT=m
- # CONFIG_CRC16 is not set
- # CONFIG_CRC_ITU_T is not set
- CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_ZLIB_DEFLATE=y
-diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
-index 5ebec6d..2957cb9 100644
---- a/arch/arm/mach-pxa/Kconfig
-+++ b/arch/arm/mach-pxa/Kconfig
-@@ -148,4 +148,12 @@ config PXA_SSP
- tristate
- help
- Enable support for PXA2xx SSP ports
-+
-+config PXA_PWR_I2C
-+ bool "Simple Power I2C interface"
-+ depends on PXA27x
-+ help
-+ Enable support for PXA27x Power I2C interface. This driver
-+ enables very simple blocking access to Power I2C, which
-+ might be useful for early access to Power Management ICs.
- endif
-diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
-index 7d6ab5c..2d7a431 100644
---- a/arch/arm/mach-pxa/Makefile
-+++ b/arch/arm/mach-pxa/Makefile
-@@ -18,7 +18,7 @@ obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o sp
- obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
- obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
- obj-$(CONFIG_MACH_TOSA) += tosa.o
--obj-$(CONFIG_MACH_EM_X270) += em-x270.o
-+obj-$(CONFIG_MACH_EM_X270) += em-x270.o em-x270-pm.o em-x270-lcd.o em-x270-devices.o
-
- # Support for blinky lights
- led-y := leds.o
-@@ -29,9 +29,16 @@ led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
-
- obj-$(CONFIG_LEDS) += $(led-y)
-
-+# CPU Frequency scaling
-+obj-$(CONFIG_CPU_FREQ_PXA) += cpu-pxa.o
-+
- # Misc features
- obj-$(CONFIG_PM) += pm.o sleep.o
- obj-$(CONFIG_PXA_SSP) += ssp.o
-+obj-$(CONFIG_PXA_PWR_I2C) += pwr-i2c.o
-+
-+#obj-m += da9030_asm.o
-+#da9030_asm-y += da9030.o da9030_c.o
-
- ifeq ($(CONFIG_PXA27x),y)
- obj-$(CONFIG_PM) += standby.o
-diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
-new file mode 100644
-index 0000000..7fa9703
---- /dev/null
-+++ b/arch/arm/mach-pxa/cpu-pxa.c
-@@ -0,0 +1,442 @@
-+/*
-+ * linux/arch/arm/mach-pxa/cpu-pxa.c
-+ *
-+ * Copyright (C) 2002,2003 Intrinsyc Software
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * History:
-+ * 31-Jul-2002 : Initial version [FB]
-+ * 29-Jan-2003 : added PXA255 support [FB]
-+ * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
-+ * 11-Jan-2006 : v2.6, support for PXA27x processor up to 624MHz (Bill Reese, Hewlett Packard)
-+ *
-+ * Note:
-+ * This driver may change the memory bus clock rate, but will not do any
-+ * platform specific access timing changes... for example if you have flash
-+ * memory connected to CS0, you will need to register a platform specific
-+ * notifier which will adjust the memory access strobes to maintain a
-+ * minimum strobe width.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/init.h>
-+#include <linux/cpufreq.h>
-+
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/pxa-regs.h>
-+
-+/*
-+ * This comes from generic.h in this directory.
-+ */
-+extern unsigned int get_clk_frequency_khz(int info);
-+
-+#define DEBUG 0
-+
-+#ifdef DEBUG
-+ static unsigned int freq_debug = DEBUG;
-+ module_param(freq_debug, int, 0644);
-+ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
-+#else
-+ #define freq_debug 0
-+#endif
-+
-+typedef struct
-+{
-+ unsigned int khz; /* CPU frequency */
-+ unsigned int membus; /* memory bus frequency */
-+ unsigned int cccr; /* new CCLKCFG setting */
-+ unsigned int div2; /* alter memory controller settings to divide by 2 */
-+ unsigned int cclkcfg; /* new CCLKCFG setting */
-+} pxa_freqs_t;
-+
-+/* Define the refresh period in mSec for the SDRAM and the number of rows */
-+#define SDRAM_TREF 64 /* standard 64ms SDRAM */
-+#if defined(CONFIG_MACH_H4700) || defined(CONFIG_ARCH_H2200) || defined(CONFIG_MACH_MAGICIAN)
-+#define SDRAM_ROWS 8192 /* hx4700 uses 2 64Mb DRAMs, 8912 rows */
-+#else
-+#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
-+#endif
-+#define MDREFR_DRI(x) (((x*SDRAM_TREF/SDRAM_ROWS - 31)/32))
-+
-+#define CCLKCFG_TURBO 0x1
-+#define CCLKCFG_FCS 0x2
-+#define CCLKCFG_HALFTURBO 0x4
-+#define CCLKCFG_FASTBUS 0x8
-+#ifdef CONFIG_ARCH_H5400
-+/* H5400's SAMCOP chip does not like when K2DB2 touched */
-+#define MDREFR_DB2_MASK (MDREFR_K1DB2)
-+#else
-+#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
-+#endif
-+#define MDREFR_DRI_MASK 0xFFF
-+#define PXA25x_CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS
-+
-+/*
-+ * For the PXA27x:
-+ * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
-+ *
-+ * A = 0 => memory controller clock from table 3-7,
-+ * A = 1 => memory controller clock = system bus clock
-+ * Run mode frequency = 13 MHz * L
-+ * Turbo mode frequency = 13 MHz * L * N
-+ * System bus frequency = 13 MHz * L / (B + 1)
-+ * System initialized by bootldr to:
-+ *
-+ * In CCCR:
-+ * A = 1
-+ * L = 16 oscillator to run mode ratio
-+ * 2N = 6 2 * (turbo mode to run mode ratio)
-+ *
-+ * In CCLKCFG:
-+ * B = 1 Fast bus mode
-+ * HT = 0 Half-Turbo mode
-+ * T = 1 Turbo mode
-+ *
-+ * For now, just support some of the combinations in table 3-7 of
-+ * PXA27x Processor Family Developer's Manual to simplify frequency
-+ * change sequences.
-+ *
-+ * Specify 2N in the PXA27x_CCCR macro, not N!
-+ */
-+#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
-+#define PXA27x_CCLKCFG(B, HT, T) (B << 3 | HT << 2 | CCLKCFG_FCS | T)
-+
-+#define PXA25x_CCCR(L, M, N) (L << 0 | M << 5 | N << 7)
-+
-+/*
-+ * Valid frequency assignments
-+ */
-+static pxa_freqs_t pxa2xx_freqs[] =
-+{
-+ /* CPU MEMBUS CCCR DIV2 */
-+#if defined(CONFIG_PXA25x)
-+#if defined(CONFIG_PXA25x_ALTERNATE_FREQS)
-+ { 99500, 99500, PXA25x_CCCR(1, 1, 2), 1, PXA25x_CCLKCFG}, /* run=99, turbo= 99, PXbus=50, SDRAM=50 */
-+ {199100, 99500, PXA25x_CCCR(1, 1, 4), 0, PXA25x_CCLKCFG}, /* run=99, turbo=199, PXbus=50, SDRAM=99 */
-+ {298500, 99500, PXA25x_CCCR(1, 1, 6), 0, PXA25x_CCLKCFG}, /* run=99, turbo=287, PXbus=50, SDRAM=99 */
-+ {298600, 99500, PXA25x_CCCR(1, 2, 3), 0, PXA25x_CCLKCFG}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */
-+ {398100, 99500, PXA25x_CCCR(1, 2, 4), 0, PXA25x_CCLKCFG} /* run=199, turbo=398, PXbus=99, SDRAM=99 */
-+#else
-+ { 99500, 99500, PXA25x_CCCR(1, 1, 2), 1, PXA25x_CCLKCFG}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */
-+ {132700, 132700, PXA25x_CCCR(3, 1, 2), 1, PXA25x_CCLKCFG}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */
-+ {199100, 99500, PXA25x_CCCR(1, 2, 2), 0, PXA25x_CCLKCFG}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */
-+ {265400, 132700, PXA25x_CCCR(3, 2, 2), 1, PXA25x_CCLKCFG}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */
-+ {331800, 165900, PXA25x_CCCR(5, 2, 2), 1, PXA25x_CCLKCFG}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */
-+ {398100, 99500, PXA25x_CCCR(1, 3, 2), 0, PXA25x_CCLKCFG} /* run=398, turbo=398, PXbus=196, SDRAM=99 */
-+#endif
-+#elif defined(CONFIG_PXA27x)
-+ {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, PXA27x_CCLKCFG(1, 0, 1)},
-+ {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, PXA27x_CCLKCFG(1, 1, 1)},
-+ {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, PXA27x_CCLKCFG(0, 0, 1)},
-+ {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, PXA27x_CCLKCFG(1, 0, 1)},
-+ {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, PXA27x_CCLKCFG(1, 0, 1)},
-+ {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, PXA27x_CCLKCFG(1, 0, 1)},
-+/* {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, PXA27x_CCLKCFG(1, 0, 1)} */
-+#endif
-+};
-+#define NUM_FREQS (sizeof(pxa2xx_freqs)/sizeof(pxa_freqs_t))
-+
-+static struct cpufreq_frequency_table pxa2xx_freq_table[NUM_FREQS+1];
-+
-+/* Return the memory clock rate for a given cpu frequency. */
-+int pxa_cpufreq_memclk(int cpu_khz)
-+{
-+ int i;
-+ int freq_mem = 0;
-+
-+ for (i = 0; i < NUM_FREQS; i++) {
-+ if (pxa2xx_freqs[i].khz == cpu_khz) {
-+ freq_mem = pxa2xx_freqs[i].membus;
-+ break;
-+ }
-+ }
-+
-+ return freq_mem;
-+}
-+EXPORT_SYMBOL(pxa_cpufreq_memclk);
-+
-+
-+/* find a valid frequency point */
-+static int pxa_verify_policy(struct cpufreq_policy *policy)
-+{
-+ int ret;
-+
-+ ret=cpufreq_frequency_table_verify(policy, pxa2xx_freq_table);
-+
-+ if(freq_debug) {
-+ printk("Verified CPU policy: %dKhz min to %dKhz max\n",
-+ policy->min, policy->max);
-+ }
-+
-+ return ret;
-+}
-+
-+static int pxa_set_target(struct cpufreq_policy *policy,
-+ unsigned int target_freq,
-+ unsigned int relation)
-+{
-+ int idx;
-+ cpumask_t cpus_allowed, allowedcpuset;
-+ int cpu = policy->cpu;
-+ struct cpufreq_freqs freqs;
-+ unsigned long flags;
-+ unsigned int unused;
-+ unsigned int preset_mdrefr, postset_mdrefr, cclkcfg;
-+
-+ if(freq_debug) {
-+ printk ("CPU PXA: target freq %d\n", target_freq);
-+ printk ("CPU PXA: relation %d\n", relation);
-+ }
-+
-+ /*
-+ * Save this threads cpus_allowed mask.
-+ */
-+ cpus_allowed = current->cpus_allowed;
-+
-+ /*
-+ * Bind to the specified CPU. When this call returns,
-+ * we should be running on the right CPU.
-+ */
-+ cpus_clear (allowedcpuset);
-+ cpu_set (cpu, allowedcpuset);
-+ set_cpus_allowed(current, allowedcpuset);
-+ BUG_ON(cpu != smp_processor_id());
-+
-+ /* Lookup the next frequency */
-+ if (cpufreq_frequency_table_target(policy, pxa2xx_freq_table,
-+ target_freq, relation, &idx)) {
-+ return -EINVAL;
-+ }
-+
-+ freqs.old = policy->cur;
-+ freqs.new = pxa2xx_freqs[idx].khz;
-+ freqs.cpu = policy->cpu;
-+ if(freq_debug) {
-+ printk(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
-+ freqs.new/1000, (pxa2xx_freqs[idx].div2) ?
-+ (pxa2xx_freqs[idx].membus/2000) :
-+ (pxa2xx_freqs[idx].membus/1000));
-+ }
-+
-+ /*
-+ * Tell everyone what we're about to do...
-+ * you should add a notify client with any platform specific
-+ * Vcc changing capability
-+ */
-+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-+
-+ /* Calculate the next MDREFR. If we're slowing down the SDRAM clock
-+ * we need to preset the smaller DRI before the change. If we're speeding
-+ * up we need to set the larger DRI value after the change.
-+ */
-+ preset_mdrefr = postset_mdrefr = MDREFR;
-+ if((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa2xx_freqs[idx].membus)) {
-+ preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) |
-+ MDREFR_DRI(pxa2xx_freqs[idx].membus);
-+ }
-+ postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) |
-+ MDREFR_DRI(pxa2xx_freqs[idx].membus);
-+
-+ /* If we're dividing the memory clock by two for the SDRAM clock, this
-+ * must be set prior to the change. Clearing the divide must be done
-+ * after the change.
-+ */
-+ if(pxa2xx_freqs[idx].div2) {
-+ /*
-+ * Potentially speeding up memory clock, so slow down the memory
-+ * before speeding up the clock.
-+ */
-+ preset_mdrefr |= MDREFR_DB2_MASK | MDREFR_K0DB4;
-+ preset_mdrefr &= ~MDREFR_K0DB2;
-+
-+ postset_mdrefr |= MDREFR_DB2_MASK | MDREFR_K0DB4;
-+ postset_mdrefr &= ~MDREFR_K0DB2;
-+ } else {
-+ /*
-+ * Potentially slowing down memory clock. Wait until after the change
-+ * to speed up the memory.
-+ */
-+ postset_mdrefr &= ~MDREFR_DB2_MASK;
-+ postset_mdrefr &= ~MDREFR_K0DB4;
-+ postset_mdrefr |= MDREFR_K0DB2;
-+ }
-+
-+ cclkcfg = pxa2xx_freqs[idx].cclkcfg;
-+
-+ if (freq_debug) {
-+ printk (KERN_INFO "CPU PXA writing 0x%08x to CCCR\n",
-+ pxa2xx_freqs[idx].cccr);
-+ printk (KERN_INFO "CPU PXA writing 0x%08x to CCLKCFG\n",
-+ pxa2xx_freqs[idx].cclkcfg);
-+ printk (KERN_INFO "CPU PXA writing 0x%08x to MDREFR before change\n",
-+ preset_mdrefr);
-+ printk (KERN_INFO "CPU PXA writing 0x%08x to MDREFR after change\n",
-+ postset_mdrefr);
-+ }
-+
-+ local_irq_save(flags);
-+
-+ /* Set new the CCCR */
-+ CCCR = pxa2xx_freqs[idx].cccr;
-+
-+ /*
-+ * Should really set both of PMCR[xIDAE] while changing the core frequency
-+ */
-+
-+ /*
-+ * TODO: On the PXA27x: If we're setting half-turbo mode and changing the
-+ * core frequency at the same time we must split it up into two operations.
-+ * The current values in the pxa2xx_freqs table don't do this, so the code
-+ * is unimplemented.
-+ */
-+
-+ __asm__ __volatile__(" \
-+ ldr r4, [%1] ; /* load MDREFR */ \
-+ b 2f ; \
-+ .align 5 ; \
-+1: \
-+ str %3, [%1] ; /* preset the MDREFR */ \
-+ mcr p14, 0, %2, c6, c0, 0 ; /* set CCLKCFG[FCS] */ \
-+ str %4, [%1] ; /* postset the MDREFR */ \
-+ \
-+ b 3f ; \
-+2: b 1b ; \
-+3: nop ; \
-+ "
-+ : "=&r" (unused)
-+ : "r" (&MDREFR), "r" (cclkcfg), \
-+ "r" (preset_mdrefr), "r" (postset_mdrefr)
-+ : "r4", "r5");
-+ local_irq_restore(flags);
-+
-+ if (freq_debug) {
-+ printk (KERN_INFO "CPU PXA Frequency change successful\n");
-+ printk (KERN_INFO "CPU PXA new CCSR 0x%08x\n", CCSR);
-+ }
-+
-+ /*
-+ * Restore the CPUs allowed mask.
-+ */
-+ set_cpus_allowed(current, cpus_allowed);
-+
-+ /*
-+ * Tell everyone what we've just done...
-+ * you should add a notify client with any platform specific
-+ * SDRAM refresh timer adjustments
-+ */
-+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-+
-+ return 0;
-+}
-+
-+static int pxa_cpufreq_init(struct cpufreq_policy *policy)
-+{
-+ cpumask_t cpus_allowed, allowedcpuset;
-+ unsigned int cpu = policy->cpu;
-+ int i;
-+ unsigned int cclkcfg;
-+
-+ cpus_allowed = current->cpus_allowed;
-+
-+ cpus_clear (allowedcpuset);
-+ cpu_set (cpu, allowedcpuset);
-+ set_cpus_allowed(current, allowedcpuset);
-+ BUG_ON(cpu != smp_processor_id());
-+
-+ /* set default governor and cpuinfo */
-+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-+ policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-+ policy->cur = get_clk_frequency_khz(0); /* current freq */
-+
-+ /* Generate the cpufreq_frequency_table struct */
-+ for(i=0;i<NUM_FREQS;i++) {
-+ pxa2xx_freq_table[i].frequency = pxa2xx_freqs[i].khz;
-+ pxa2xx_freq_table[i].index = i;
-+ }
-+ pxa2xx_freq_table[i].frequency = CPUFREQ_TABLE_END;
-+
-+ /*
-+ * Set the policy's minimum and maximum frequencies from the tables
-+ * just constructed. This sets cpuinfo.mxx_freq, min and max.
-+ */
-+ cpufreq_frequency_table_cpuinfo (policy, pxa2xx_freq_table);
-+
-+ set_cpus_allowed(current, cpus_allowed);
-+ printk(KERN_INFO "PXA CPU frequency change support initialized\n");
-+
-+ if (freq_debug) {
-+ printk (KERN_INFO "PXA CPU initial CCCR 0x%08x\n", CCCR);
-+ asm
-+ (
-+ "mrc p14, 0, %0, c6, c0, 0 ; /* read CCLKCFG from CP14 */ "
-+ : "=r" (cclkcfg) :
-+ );
-+ printk ("PXA CPU initial CCLKCFG 0x%08x\n", cclkcfg);
-+ printk ("PXA CPU initial MDREFR 0x%08x\n", MDREFR);
-+ }
-+
-+ return 0;
-+}
-+
-+static unsigned int pxa_cpufreq_get(unsigned int cpu)
-+{
-+ cpumask_t cpumask_saved;
-+ unsigned int cur_freq;
-+
-+ cpumask_saved = current->cpus_allowed;
-+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
-+ BUG_ON(cpu != smp_processor_id());
-+
-+ cur_freq = get_clk_frequency_khz(0);
-+
-+ set_cpus_allowed(current, cpumask_saved);
-+
-+ return cur_freq;
-+}
-+
-+static struct cpufreq_driver pxa_cpufreq_driver = {
-+ .verify = pxa_verify_policy,
-+ .target = pxa_set_target,
-+ .init = pxa_cpufreq_init,
-+ .get = pxa_cpufreq_get,
-+#if defined(CONFIG_PXA25x)
-+ .name = "PXA25x",
-+#elif defined(CONFIG_PXA27x)
-+ .name = "PXA27x",
-+#endif
-+};
-+
-+static int __init pxa_cpu_init(void)
-+{
-+ return cpufreq_register_driver(&pxa_cpufreq_driver);
-+}
-+
-+static void __exit pxa_cpu_exit(void)
-+{
-+ cpufreq_unregister_driver(&pxa_cpufreq_driver);
-+}
-+
-+
-+MODULE_AUTHOR ("Intrinsyc Software Inc.");
-+MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture");
-+MODULE_LICENSE("GPL");
-+module_init(pxa_cpu_init);
-+module_exit(pxa_cpu_exit);
-+
-diff --git a/arch/arm/mach-pxa/em-x270-devices.c b/arch/arm/mach-pxa/em-x270-devices.c
-new file mode 100644
-index 0000000..d142930
---- /dev/null
-+++ b/arch/arm/mach-pxa/em-x270-devices.c
-@@ -0,0 +1,331 @@
-+/*
-+ * Support for CompuLab EM-X270 platfrom specific device
-+ * initialization, and per-device power management functions.
-+ *
-+ * Copyright (C) 2007 CompuLab, Ltd.
-+ * Author: Mike Rapoport <mike at compulab.co.il>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/sysfs.h>
-+#include <linux/ctype.h>
-+#include <linux/delay.h>
-+#include <linux/da9030.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+
-+#include "../../../drivers/i2c/chips/da9030.h"
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+struct em_x270_dev_data {
-+ int (*is_on)(struct device *dev);
-+ int (*set_on)(struct device *dev, int on);
-+ int (*get_opts)(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf);
-+ int (*set_opts)(struct device *dev, int opts);
-+};
-+
-+static void em_x270_dev_release(struct device * dev)
-+{
-+
-+}
-+
-+static ssize_t em_x270_dev_pm_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct em_x270_dev_data *pm_data = dev->platform_data;
-+ int is_on = pm_data->is_on(dev);
-+
-+ return sprintf(buf, "%d\n", is_on);
-+}
-+
-+static ssize_t em_x270_dev_pm_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ char *endp;
-+ int on = simple_strtoul(buf, &endp, 0);
-+ size_t size = endp - buf;
-+ struct em_x270_dev_data *pm_data = dev->platform_data;
-+
-+ pr_info("%s: %s\n", __FUNCTION__, buf);
-+
-+ if (*endp && isspace(*endp))
-+ size++;
-+ if (size != count)
-+ return -EINVAL;
-+
-+ pm_data->set_on(dev, on);
-+
-+ return count;
-+}
-+
-+static DEVICE_ATTR(pwr_on, S_IWUSR | S_IRUGO,
-+ em_x270_dev_pm_show, em_x270_dev_pm_store);
-+
-+static int gprs_is_on(struct device *dev)
-+{
-+ return !!(pxa_gpio_get_value(20));
-+}
-+
-+static int gprs_set_on(struct device *dev, int on)
-+{
-+ pr_info("%s: on = %d\n", __FUNCTION__, on);
-+ if (on) {
-+ pxa_gpio_mode(20 | GPIO_OUT | GPIO_DFLT_HIGH);
-+ mdelay(500);
-+ pxa_gpio_set_value(82, 0);
-+ mdelay(500);
-+ pxa_gpio_mode(82 | GPIO_OUT | GPIO_DFLT_HIGH);
-+ mdelay(1000);
-+ pxa_gpio_set_value(82, 0);
-+ }
-+ else {
-+ pxa_gpio_set_value(20, 0);
-+ pxa_gpio_mode(20 | GPIO_OUT);
-+ }
-+
-+ return 0;
-+}
-+
-+static struct em_x270_dev_data em_x270_gprs_data = {
-+ .is_on = gprs_is_on,
-+ .set_on = gprs_set_on,
-+};
-+
-+static struct platform_device em_x270_gprs = {
-+ .name = "gprs",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &em_x270_gprs_data,
-+ .release = em_x270_dev_release,
-+ },
-+};
-+
-+static int is_wlan_on;
-+
-+static int wlan_is_on(struct device *dev)
-+{
-+ return is_wlan_on;
-+}
-+
-+static int wlan_set_on(struct device *dev, int on)
-+{
-+ if (on) {
-+ /* WLAN power-up sequence */
-+ /* Mask LDO17 and LDO19 tolerance events */
-+ da9030_set_reg(IRQ_MASK_C,
-+ IRQ_MASK_C_LDO19 | IRQ_MASK_C_LDO17);
-+
-+ /* Force I2C control over LDO17, LDO19 */
-+ da9030_set_reg(SLEEP_CONTROL,
-+ APP_SLEEP_CTL_BYPASS_LDO19 |
-+ APP_SLEEP_CTL_BYPASS_LDO17);
-+
-+ /* Turn off LDO17 and LDO19 */
-+ da9030_set_reg(REG_CONTROL_1_17,
-+ RC1_LDO16_EN | RC1_LDO15_EN |
-+ RC1_LDO11_EN | RC1_LDO10_EN | RC1_BUCK2_EN);
-+ da9030_set_reg(REG_CONTROL_2_18, RC2_SIMCP_EN | RC2_LDO18_EN);
-+
-+ /* Set LDO17 voltage to 3V (VCC_WLAN_IO) */
-+ da9030_set_reg(LDO_17_SIMCP0, LDO_17_SIMCP0_LDO17_3V);
-+ mdelay(200);
-+
-+ /* Turn WLAN RF power on */
-+ pxa_gpio_mode(115 | GPIO_OUT | GPIO_DFLT_HIGH);
-+
-+ /* Turn LDO17 on */
-+ da9030_set_reg(REG_CONTROL_1_17,
-+ RC1_LDO17_EN| RC1_LDO16_EN | RC1_LDO15_EN |
-+ RC1_LDO11_EN | RC1_LDO10_EN | RC1_BUCK2_EN);
-+ mdelay(200);
-+
-+ /* Turn on LDO19 */
-+ da9030_set_reg(REG_CONTROL_2_18,
-+ RC2_SIMCP_EN | RC2_LDO18_EN | RC2_LDO19_EN);
-+
-+ }
-+ else {
-+ /* FIXME: implement BGW shutdown */
-+ }
-+ is_wlan_on = on;
-+
-+ return 0;
-+}
-+
-+static struct em_x270_dev_data em_x270_wlan_data = {
-+ .is_on = wlan_is_on,
-+ .set_on = wlan_set_on,
-+};
-+
-+static struct platform_device em_x270_wlan = {
-+ .name = "wlan",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &em_x270_wlan_data,
-+ .release = em_x270_dev_release,
-+ },
-+};
-+
-+static int gps_is_on(struct device *dev)
-+{
-+ int val = da9030_get_reg(REG_CONTROL_1_97);
-+ return !!(val & RC3_LDO3_EN);
-+}
-+
-+static int gps_set_on(struct device *dev, int on)
-+{
-+ int val = da9030_get_reg(REG_CONTROL_1_97);
-+
-+ if (on)
-+ val |= RC3_LDO3_EN;
-+ else
-+ val &= ~RC3_LDO3_EN;
-+ da9030_set_reg(REG_CONTROL_1_97, val);
-+
-+ return 0;
-+}
-+
-+static struct em_x270_dev_data em_x270_gps_data = {
-+ .is_on = gps_is_on,
-+ .set_on = gps_set_on,
-+};
-+
-+static struct platform_device em_x270_gps = {
-+ .name = "gps",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &em_x270_gps_data,
-+ .release = em_x270_dev_release,
-+ },
-+};
-+
-+static int usb_mode;
-+static int usb_host_is_on(struct device *dev)
-+{
-+ return usb_mode;
-+}
-+
-+static int usb_host_set_on(struct device *dev, int on)
-+{
-+ if (on) {
-+ da9030_set_reg(MISC_CONTROLB, MISCB_SESSION_VALID_ENABLE);
-+ da9030_set_reg(USBPUMP,
-+ USB_PUMP_EN_USBVEP |
-+ USB_PUMP_EN_USBVE |
-+ USB_PUMP_USBVE);
-+
-+ /* enable port 2 transiever */
-+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
-+ usb_mode = 1;
-+ }
-+ else {
-+ UP2OCR = UP2OCR_DPPUE | UP2OCR_DPPUBE | UP2OCR_HXOE;
-+ da9030_set_reg(USBPUMP,
-+ USB_PUMP_EN_USBVEP | USB_PUMP_EN_USBVE);
-+ usb_mode = 0;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct em_x270_dev_data em_x270_usb_host_data = {
-+ .is_on = usb_host_is_on,
-+ .set_on = usb_host_set_on,
-+};
-+
-+static struct platform_device em_x270_usb_host = {
-+ .name = "usb_host",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &em_x270_usb_host_data,
-+ .release = em_x270_dev_release,
-+ },
-+};
-+
-+static struct platform_device *em_x270_devices[] = {
-+ &em_x270_gprs,
-+ &em_x270_wlan,
-+ &em_x270_gps,
-+ &em_x270_usb_host,
-+};
-+
-+static struct work_struct usb_work;
-+static void usb_worker(struct work_struct *work)
-+{
-+ usb_host_set_on(NULL, !pxa_gpio_get_value(21));
-+}
-+
-+static irqreturn_t usb_irq_handler(int irq, void *regs)
-+{
-+ schedule_work(&usb_work);
-+
-+ pr_info("%s\n", __FUNCTION__);
-+ return IRQ_HANDLED;
-+}
-+
-+static int em_x270_devices_init(void)
-+{
-+ int i, ret;
-+
-+ for (i = 0; i < ARRAY_SIZE(em_x270_devices); i++ ) {
-+ ret = platform_device_register(em_x270_devices[i]);
-+ if (ret) {
-+ dev_dbg(&em_x270_devices[i]->dev,
-+ "Registration failed: %d\n", ret);
-+ continue;
-+ }
-+
-+ ret = device_create_file(&em_x270_devices[i]->dev,
-+ &dev_attr_pwr_on);
-+ if (ret) {
-+ dev_dbg(&em_x270_devices[i]->dev,
-+ "PWR_ON attribute failed: %d\n", ret);
-+ }
-+
-+ dev_dbg(&em_x270_devices[i]->dev,
-+ "Registered PWR ON attribute\n");
-+ }
-+
-+ /* setup USB detection irq */
-+ INIT_WORK(&usb_work, usb_worker);
-+ set_irq_type(IRQ_GPIO(21), IRQT_BOTHEDGE);
-+ ret = request_irq(IRQ_GPIO(21), usb_irq_handler, IRQF_DISABLED,
-+ "usb detect", 0);
-+ if (ret) {
-+ pr_info("USB device detection disabled\n");
-+ }
-+ else {
-+ schedule_work(&usb_work);
-+ }
-+
-+ return 0;
-+}
-+
-+static void em_x270_devices_exit(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(em_x270_devices); i++ ) {
-+ device_remove_file(&em_x270_devices[i]->dev,
-+ &dev_attr_pwr_on);
-+ platform_device_unregister(em_x270_devices[i]);
-+ }
-+}
-+
-+late_initcall(em_x270_devices_init);
-+module_exit(em_x270_devices_exit);
-+
-+MODULE_AUTHOR("Mike Rapoport");
-+MODULE_DESCRIPTION("Support for platfrom specific device attributes for EM-X270");
-+MODULE_LICENSE("GPL");
-diff --git a/arch/arm/mach-pxa/em-x270-lcd.c b/arch/arm/mach-pxa/em-x270-lcd.c
-new file mode 100644
-index 0000000..437efe1
---- /dev/null
-+++ b/arch/arm/mach-pxa/em-x270-lcd.c
-@@ -0,0 +1,223 @@
-+/*
-+ * LCD initialization and backlight managemnet for EM-X270
-+ *
-+ * Copyright (C) 2007 CompuLab, Ltd.
-+ * Author: Igor Vaisbein <igor at compulab.co.il>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/da9030.h>
-+#include <linux/delay.h>
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/sharpsl.h>
-+#include <asm/arch/ssp.h>
-+
-+#include "devices.h"
-+
-+#define GPIO87_nPCE_2 87 /* Card Enable for Card Space (PXA27x) */
-+#define GPIO87_nPCE_2_MD (87 | GPIO_ALT_FN_1_IN)
-+#define GPIO87_USB3_1_MD (87 | GPIO_ALT_FN_3_IN)
-+#define GPIO87_SSPTXD2_MD (87 | GPIO_ALT_FN_1_OUT)
-+#define GPIO87_SSFRM2_MD (87 | GPIO_ALT_FN_3_OUT)
-+
-+#define LCCR4 __REG(0x44000010)
-+
-+#define TD035STEE1_LCD_ID 0x2008
-+
-+static void em_x270_set_bl_intensity(int intensity)
-+{
-+ da9030_set_wled((intensity != 0), intensity);
-+}
-+
-+struct corgibl_machinfo em_x270_bl_machinfo = {
-+ .max_intensity = 0x7,
-+ .default_intensity = 0x3,
-+ .limit_mask = 0x1,
-+ .set_bl_intensity = em_x270_set_bl_intensity,
-+};
-+
-+static void em_x270_bl_release(struct device * dev)
-+{
-+
-+}
-+
-+static struct platform_device em_x270_bl = {
-+ .name = "corgi-bl",
-+ .dev = {
-+ .release = em_x270_bl_release,
-+ .parent = &pxa_device_fb.dev,
-+ .platform_data = &em_x270_bl_machinfo,
-+ },
-+ .id = -1,
-+};
-+
-+/*
-+ * Helper functions to access LCD throuhg SPI interface
-+ */
-+static void set_ssp_9bit(void)
-+{
-+ int temp;
-+ SSCR0 = 0xFF208;
-+ SSCR0 = 0xFF288;
-+ SSCR1 = 0x40000018;
-+
-+ while (SSSR & 0x8)
-+ temp = SSDR;
-+}
-+
-+static void set_ssp_18bit(void)
-+{
-+ int temp;
-+ SSCR0 = 0x1FF201;
-+ SSCR0 = 0x1FF281;
-+ SSCR1 = 0x40000018;
-+ while (SSSR & 0x8)
-+ temp = SSDR;
-+}
-+
-+static void set_ssp_rcv(void)
-+{
-+ int temp;
-+ SSCR0 = 0x1FF20F;
-+ SSCR0 = 0x1FF28F;
-+ SSCR1 = 0x40000018;
-+ while (SSSR & 0x8)
-+ temp = SSDR;
-+}
-+
-+static void send_ssp_9bit(unsigned int value)
-+{
-+ int temp;
-+ SSDR = (value);
-+
-+ asm volatile ("mcr p15, 0, r0, c7, c10, 4":::"r0");
-+
-+ if (!(SSSR & 0x4))
-+ while ((SSSR & 0xf00) == 0)
-+ ;
-+
-+ while ((SSSR & 0xf00) != 0)
-+ ;
-+ while (SSSR & 0x10)
-+ ;
-+ while (SSSR & 0x8)
-+ temp = SSDR;
-+}
-+
-+static void send_ssp_18bit(unsigned int value)
-+{
-+ int temp;
-+ SSDR = (value);
-+
-+ asm volatile ("mcr p15, 0, r0, c7, c10, 4":::"r0");
-+
-+ if (!(SSSR & 0x4))
-+ while ((SSSR & 0xf00) == 0)
-+ ;
-+
-+ while ((SSSR & 0xf00) != 0)
-+ ;
-+ while (SSSR & 0x10)
-+ ;
-+ while (SSSR & 0x8)
-+ temp = SSDR;
-+}
-+
-+static unsigned int rcv_ssp_18bit(void)
-+{
-+ SSDR = ((0x04) << 23);
-+ asm volatile ("mcr p15, 0, r0, c7, c10, 4":::"r0");
-+ if (!(SSSR & 0x4))
-+ while ((SSSR & 0xf00) == 0)
-+ ;
-+ while ((SSSR & 0xf00) != 0)
-+ ;
-+ while (SSSR & 0x10)
-+ ;
-+ return SSDR;
-+}
-+
-+/* LCD init sequence */
-+int em_x270_lcd_detect(void)
-+{
-+ unsigned int data;
-+
-+ /* Reset the LCD module */
-+ pxa_gpio_mode(GPIO87_nPCE_2 | GPIO_OUT);
-+ GPCR(GPIO87_nPCE_2) |= GPIO_bit(GPIO87_nPCE_2);
-+ mdelay(75);
-+ GPSR(GPIO87_nPCE_2) |= GPIO_bit(GPIO87_nPCE_2);
-+ mdelay(70);
-+
-+ /* TD035STEE1 LCD_SSP initialization commands */
-+ set_ssp_9bit();
-+ send_ssp_9bit(0x000);
-+ mdelay(5);
-+
-+ send_ssp_9bit(0x000);
-+ mdelay(5);
-+
-+ send_ssp_9bit(0x000);
-+ mdelay(5);
-+
-+ set_ssp_18bit();
-+ send_ssp_18bit(0x17980);
-+ mdelay(5);
-+
-+ send_ssp_18bit(0x17F10);
-+ mdelay(5);
-+
-+ set_ssp_9bit();
-+ send_ssp_9bit(0x011);
-+ mdelay(50);
-+
-+ send_ssp_9bit(0x029);
-+ mdelay(10);
-+
-+ set_ssp_rcv();
-+
-+ /* Check for LCD ID, to enable the back-light */
-+ data = rcv_ssp_18bit();
-+
-+ if ((data & 0xFFFF) != TD035STEE1_LCD_ID)
-+ return -ENODEV;
-+
-+ /* enable backlight */
-+ da9030_set_wled(1, 2);
-+ return 0;
-+}
-+
-+static int em_x270_lcd_init(void)
-+{
-+ int ret;
-+ pr_debug("%s\n", __FUNCTION__);
-+ ret = em_x270_lcd_detect();
-+ if (ret)
-+ return ret;
-+
-+ /* make sure we keep LCCR4 with PCD=0 */
-+ LCCR4 = 0x0;
-+
-+ return platform_device_register(&em_x270_bl);
-+}
-+
-+static void em_x270_lcd_exit(void)
-+{
-+ pr_debug("%s\n", __FUNCTION__);
-+ platform_device_unregister(&em_x270_bl);
-+}
-+
-+late_initcall(em_x270_lcd_init);
-+module_exit(em_x270_lcd_exit);
-+
-+MODULE_DESCRIPTION("EM-X270 backlight and LCD initialization driver");
-+MODULE_AUTHOR("Mike Rapoport");
-+MODULE_LICENSE("GPL");
-diff --git a/arch/arm/mach-pxa/em-x270-pm.c b/arch/arm/mach-pxa/em-x270-pm.c
-new file mode 100644
-index 0000000..55ba4cd
---- /dev/null
-+++ b/arch/arm/mach-pxa/em-x270-pm.c
-@@ -0,0 +1,892 @@
-+/*
-+ * Support for CompuLab EM-X270 platform power management
-+ *
-+ * Copyright (C) 2007 CompuLab, Ltd.
-+ * Author: Mike Rapoport <mike at compulab.co.il>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/sysfs.h>
-+#include <linux/pm.h>
-+#include <linux/da9030.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/delay.h>
-+#include <linux/ctype.h>
-+
-+#include <linux/apm-emulation.h>
-+#include <linux/platform_device.h>
-+#include <linux/power_supply.h>
-+
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-+
-+#include "../../../drivers/i2c/chips/da9030.h"
-+
-+#include <asm/arch/pm.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pwr-i2c.h>
-+
-+#define DA9030_ADDR 0x92
-+
-+#define EM_X270_BATCHK_TIME_SUSPEND (10*60) /* 10 min */
-+
-+#define VOLTAGE_MAX_DESIGN 4200000 /* 4.2V in uV */
-+#define VOLTAGE_MIN_DESIGN 3000000 /* 3V in uV */
-+
-+#define REG2VOLT(x) ((((x) * 2650) >> 8) + 2650)
-+#define VOLT2REG(x) ((((x) - 2650) << 8) / 2650)
-+
-+#define REG2CURR(x) ((((x) * 24000) >> 8) / 15)
-+
-+#define VCHARGE_MIN_THRESHOLD VOLT2REG(3200)
-+#define VCHARGE_MAX_THRESHOLD VOLT2REG(5500)
-+
-+#define VBAT_LOW_THRESHOLD VOLT2REG(3600)
-+#define VBAT_CRIT_THRESHOLD VOLT2REG(3400)
-+
-+#define VBAT_CHARGE_START VOLT2REG(4100)
-+#define VBAT_CHARGE_STOP VOLT2REG(4200)
-+#define VBAT_CHARGE_RESTART VOLT2REG(4000)
-+
-+#define TBAT_LOW_THRESHOLD 197 /* 0oC */
-+#define TBAT_HIGH_THRESHOLD 78 /* 45oC */
-+#define TBAT_RESUME_THRESHOLD 100 /* 35oC */
-+
-+struct em_x270_charger;
-+
-+struct em_x270_charger_ops {
-+ void (*get_status)(struct em_x270_charger *charger);
-+ void (*set_charge)(struct em_x270_charger *charger, int on);
-+
-+ s32 (*da9030_get_reg)(u32 reg);
-+ s32 (*da9030_set_reg)(u32 reg, u8 val);
-+};
-+
-+struct em_x270_charger {
-+ struct device *dev;
-+
-+ struct power_supply bat;
-+ struct da9030_adc_res adc;
-+ struct delayed_work work;
-+
-+ int interval;
-+
-+ int da9030_status;
-+ int da9030_fault;
-+ int mA;
-+ int mV;
-+ int is_on;
-+
-+ struct em_x270_charger_ops *ops;
-+
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debug_file;
-+#endif
-+};
-+
-+static struct em_x270_charger *the_charger;
-+
-+static unsigned short tbat_readings[] = {
-+ 300, 244, 200, 178, 163, 152, 144, 137, 131,
-+ 126, 122, 118, 114, 111, 108, 105, 103, 101,
-+ 98, 96, 94, 93, 91, 89, 88, 86, 85,
-+ 83, 82, 81, 79, 78, 77, 76, 75, 74,
-+ 73, 72, 71, 70, 69, 68, 67, 67, 66,
-+ 65, 64, 63, 63, 62, 61, 60, 60, 59,
-+ 58, 58, 57, 57, 56, 55, 55, 54, 53,
-+ 53, 52, 52, 51, 51, 50, 50, 49, 49,
-+ 48, 48, 47, 47, 46, 46, 45, 45, 44,
-+ 44, 43, 43, 42, 42, 41, 41, 41, 40,
-+ 40, 39, 39, 38, 38, 38, 37, 37, 36,
-+ 36, 35, 35, 35, 34, 34, 34, 33, 33,
-+ 32, 32, 32, 31, 31, 30, 30, 30, 29,
-+ 29, 29, 28, 28, 28, 27, 27, 26, 26,
-+ 26, 25, 25, 25, 24, 24, 24, 23, 23,
-+ 23, 22, 22, 21, 21, 21, 20, 20, 20,
-+ 19, 19, 19, 18, 18, 18, 17, 17, 17,
-+ 16, 16, 16, 15, 15, 14, 14, 14, 13,
-+ 13, 13, 12, 12, 12, 11, 11, 11, 10,
-+ 10, 10, 9, 9, 8, 8, 8, 7, 7,
-+ 7, 6, 6, 5, 5, 5, 4, 4, 3,
-+ 3, 3, 2, 2, 1, 1, 1, 0, 0,
-+ -1, -1, -1, -2, -2, -3, -3, -4, -4,
-+ -5, -5, -6, -6, -6, -7, -7, -8, -9,
-+ -9, -10, -10, -11, -11, -12, -12, -13, -14,
-+ -14, -15, -16, -16, -17, -18, -18, -19, -20,
-+ -21, -21, -22, -23, -24, -25, -26, -27, -28,
-+ -30, -31, -32, -34, -35, -37, -39, -41, -44,
-+ -47, -50, -56, -64,
-+};
-+
-+static inline int usb_host_on(void)
-+{
-+ return !pxa_gpio_get_value(21);
-+}
-+
-+#ifdef CONFIG_DEBUG_FS
-+
-+static int debug_show(struct seq_file *s, void *data)
-+{
-+ struct em_x270_charger *charger = s->private;
-+
-+ seq_printf(s, "charger is %s\n", charger->is_on ? "on" : "off");
-+ if (charger->da9030_status & CHRG_CHARGER_ENABLE) {
-+ seq_printf(s, "iset = %dmA, vset = %dmV\n",
-+ charger->mA, charger->mV);
-+ }
-+
-+ seq_printf(s, "vbat_res = %d (%dmV)\n",
-+ charger->adc.vbat_res, REG2VOLT(charger->adc.vbat_res));
-+ seq_printf(s, "vbatmin_res = %d (%dmV)\n",
-+ charger->adc.vbatmin_res,
-+ REG2VOLT(charger->adc.vbatmin_res));
-+ seq_printf(s, "vbatmintxon = %d (%dmV)\n",
-+ charger->adc.vbatmintxon,
-+ REG2VOLT(charger->adc.vbatmintxon));
-+ seq_printf(s, "ichmax_res = %d (%dmA)\n",
-+ charger->adc.ichmax_res,
-+ REG2CURR(charger->adc.ichmax_res));
-+ seq_printf(s, "ichmin_res = %d (%dmA)\n",
-+ charger->adc.ichmin_res,
-+ REG2CURR(charger->adc.ichmin_res));
-+ seq_printf(s, "ichaverage_res = %d (%dmA)\n",
-+ charger->adc.ichaverage_res,
-+ REG2CURR(charger->adc.ichaverage_res));
-+ seq_printf(s, "vchmax_res = %d (%dmV)\n",
-+ charger->adc.vchmax_res,
-+ REG2VOLT(charger->adc.vchmax_res));
-+ seq_printf(s, "vchmin_res = %d (%dmV)\n",
-+ charger->adc.vchmin_res,
-+ REG2VOLT(charger->adc.vchmin_res));
-+ seq_printf(s, "tbat_res = %d (%doC)\n", charger->adc.tbat_res,
-+ tbat_readings[charger->adc.tbat_res]);
-+ seq_printf(s, "adc_in4_res = %d\n", charger->adc.adc_in4_res);
-+ seq_printf(s, "adc_in5_res = %d\n", charger->adc.adc_in5_res);
-+
-+ return 0;
-+}
-+
-+static int debug_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, debug_show, inode->i_private);
-+}
-+
-+static const struct file_operations debug_fops = {
-+ .open = debug_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+static struct dentry* em_x270_create_debugfs(struct em_x270_charger *charger)
-+{
-+ charger->debug_file = debugfs_create_file("charger", 0666, 0, charger,
-+ &debug_fops);
-+ return charger->debug_file;
-+}
-+
-+static void em_x270_remove_debugfs(struct em_x270_charger *charger)
-+{
-+ debugfs_remove(charger->debug_file);
-+}
-+#else
-+#define em_x270_create_debugfs(x) NULL
-+#define em_x270_remove_debugfs(x) do {} while(0)
-+#endif
-+
-+/*********************************************************************/
-+/* DA9030 access functions for suspend/resume */
-+#define DA_ADDR 0x49
-+static inline s32 __da9030_get_reg(u32 reg)
-+{
-+ pr_info("%s: reg = %d\n", __FUNCTION__, reg);
-+ return pxa_pwr_i2c_reg_read(DA_ADDR, reg);
-+}
-+
-+static inline s32 __da9030_set_reg(u32 reg, u8 val)
-+{
-+ pr_info("%s: reg = %d, val = %d\n", __FUNCTION__, reg, val);
-+ return pxa_pwr_i2c_reg_write(DA_ADDR, reg, val);
-+}
-+
-+/*********************************************************************/
-+/* helpers for charger state monnitor. Different version for stready
-+ * state and suspended system
-+ */
-+static void em_x270_get_charger_status(struct em_x270_charger *charger)
-+{
-+ da9030_get_charger(&charger->is_on, &charger->mA, &charger->mV);
-+ da9030_read_adc(&charger->adc);
-+ charger->da9030_status = da9030_get_status();
-+ charger->da9030_fault = da9030_get_fault_log();
-+}
-+
-+static void em_x270_set_charge(struct em_x270_charger *charger, int on)
-+{
-+ if (on) {
-+ pr_debug("%s: enabling charger\n", __FUNCTION__);
-+ da9030_set_thresholds(TBAT_HIGH_THRESHOLD,
-+ TBAT_RESUME_THRESHOLD,
-+ TBAT_LOW_THRESHOLD,
-+ VBAT_LOW_THRESHOLD);
-+ da9030_set_reg(CCTR_CONTROL, CCTR_SET_8MIN);
-+ da9030_set_charger(1, 1000, 4200);
-+ da9030_set_led(3, 1, 0, 0, 0);
-+ charger->is_on = 1;
-+ }
-+ else {
-+ /* disable charger */
-+ pr_debug("%s: disabling charger\n", __FUNCTION__);
-+ da9030_set_charger(0, 0, 0);
-+ da9030_set_led(3, 0, 0, 0, 0);
-+ charger->is_on = 0;
-+ }
-+}
-+
-+static void em_x270_get_charger_status_suspend(struct em_x270_charger *charger)
-+{
-+ s32 val;
-+
-+ val = __da9030_get_reg(CHARGE_CONTROL);
-+ charger->is_on = (val & CHRG_CHARGER_ENABLE) ? 1 : 0;
-+ charger->mA = ((val >> 3) & 0xf) * 100;
-+ charger->mV = (val & 0x7) * 50 + 4000;
-+
-+ charger->adc.vbat_res = __da9030_get_reg(VBAT_RES);
-+ charger->adc.vchmax_res = __da9030_get_reg(VCHMAX_RES);
-+ charger->adc.vchmin_res = __da9030_get_reg(VCHMIN_RES);
-+ charger->adc.tbat_res = __da9030_get_reg(TBAT_RES);
-+
-+ charger->da9030_status = __da9030_get_reg(STATUS);
-+ charger->da9030_fault = __da9030_get_reg(FAULT_LOG);
-+}
-+
-+static void em_x270_set_charge_suspend(struct em_x270_charger *charger, int on)
-+{
-+ if (on) {
-+ u8 val = 0;
-+ int mA = 1000;
-+ int mV = 4200;
-+
-+ pr_debug("%s: enabling charger\n", __FUNCTION__);
-+ val = CHRG_CHARGER_ENABLE;
-+ val |= (mA / 100) << 3;
-+ val |= (mV - 4000) / 50;
-+
-+ __da9030_set_reg(CCTR_CONTROL, CCTR_SET_8MIN);
-+ __da9030_set_reg(VBATMON, VBAT_LOW_THRESHOLD);
-+ __da9030_set_reg(CHARGE_CONTROL, val);
-+ charger->is_on = 1;
-+ }
-+ else {
-+ /* disable charger */
-+ pr_debug("%s: disabling charger\n", __FUNCTION__);
-+ __da9030_set_reg(CHARGE_CONTROL, 0);
-+ charger->is_on = 0;
-+ }
-+}
-+
-+static struct em_x270_charger_ops em_x270_charger_ops = {
-+ .get_status = em_x270_get_charger_status,
-+ .set_charge = em_x270_set_charge,
-+ .da9030_get_reg = da9030_get_reg,
-+ .da9030_set_reg = da9030_set_reg,
-+};
-+
-+static struct em_x270_charger_ops em_x270_charger_ops_suspend = {
-+ .get_status = em_x270_get_charger_status_suspend,
-+ .set_charge = em_x270_set_charge_suspend,
-+ .da9030_get_reg = __da9030_get_reg,
-+ .da9030_set_reg = __da9030_set_reg,
-+};
-+
-+/*********************************************************************/
-+/* charging state machine */
-+static void em_x270_check_charger_state(struct em_x270_charger *charger)
-+{
-+ charger->ops->get_status(charger);
-+
-+/* we wake or boot with external power on */
-+ if (!charger->is_on) {
-+ if ((charger->da9030_status & STATUS_CHDET) &&
-+ (!usb_host_on()) &&
-+ (charger->adc.vbat_res < VBAT_CHARGE_START)) {
-+ pr_debug("%s: vbat_res <= 4100\n", __FUNCTION__);
-+ charger->ops->set_charge(charger, 1);
-+ }
-+ }
-+ else {
-+ if (charger->adc.vbat_res >= VBAT_CHARGE_STOP) {
-+ pr_debug("%s: vbat_res >= 4200\n", __FUNCTION__);
-+ charger->ops->set_charge(charger, 0);
-+ charger->ops->da9030_set_reg(VBATMON,
-+ VBAT_CHARGE_RESTART);
-+ }
-+ else if (charger->adc.vbat_res > VBAT_LOW_THRESHOLD) {
-+ /* we are charging and passed LOW_THRESH,
-+ so upate DA9030 VBAT threshold
-+ */
-+ pr_debug("%s: vbat_res >= %d\n", __FUNCTION__,
-+ REG2VOLT(VBAT_LOW_THRESHOLD));
-+ charger->ops->da9030_set_reg(VBATMON,
-+ VBAT_LOW_THRESHOLD);
-+ }
-+ if (charger->adc.vchmax_res > VCHARGE_MAX_THRESHOLD ||
-+ charger->adc.vchmin_res < VCHARGE_MIN_THRESHOLD ||
-+ /* Tempreture readings are negative */
-+ charger->adc.tbat_res < TBAT_HIGH_THRESHOLD ||
-+ charger->adc.tbat_res > TBAT_LOW_THRESHOLD ) {
-+ /* disable charger */
-+ pr_info("%s: thresholds fail\n", __FUNCTION__);
-+ charger->ops->set_charge(charger, 0);
-+ }
-+ }
-+}
-+
-+static void em_x270_charging_monitor(struct work_struct *work)
-+{
-+ struct em_x270_charger *charger;
-+
-+ charger = container_of(work, struct em_x270_charger, work.work);
-+
-+ em_x270_check_charger_state(charger);
-+
-+ /* reschedule for the next time */
-+ schedule_delayed_work(&charger->work, charger->interval);
-+}
-+
-+void em_x270_battery_release(struct device * dev)
-+{
-+}
-+
-+struct em_x270_battery_thresh {
-+ int voltage;
-+ int percentage;
-+};
-+
-+static struct em_x270_battery_thresh vbat_ranges[] = {
-+ { 150, 100},
-+ { 149, 99},
-+ { 148, 98},
-+ { 147, 98},
-+ { 146, 97},
-+ { 145, 96},
-+ { 144, 96},
-+ { 143, 95},
-+ { 142, 94},
-+ { 141, 93},
-+ { 140, 92},
-+ { 139, 91},
-+ { 138, 90},
-+ { 137, 90},
-+ { 136, 89},
-+ { 135, 88},
-+ { 134, 88},
-+ { 133, 87},
-+ { 132, 86},
-+ { 131, 85},
-+ { 130, 83},
-+ { 129, 82},
-+ { 128, 81},
-+ { 127, 81},
-+ { 126, 80},
-+ { 125, 75},
-+ { 124, 74},
-+ { 123, 73},
-+ { 122, 70},
-+ { 121, 66},
-+ { 120, 65},
-+ { 119, 64},
-+ { 118, 64},
-+ { 117, 63},
-+ { 116, 59},
-+ { 115, 58},
-+ { 114, 57},
-+ { 113, 57},
-+ { 112, 56},
-+ { 111, 50},
-+ { 110, 49},
-+ { 109, 49},
-+ { 108, 48},
-+ { 107, 48},
-+ { 106, 33},
-+ { 105, 32},
-+ { 104, 32},
-+ { 103, 32},
-+ { 102, 31},
-+ { 101, 16},
-+ { 100, 15},
-+ { 99, 15},
-+ { 98, 15},
-+ { 97, 10},
-+ { 96, 9},
-+ { 95, 7},
-+ { 94, 3},
-+ { 93, 0},
-+};
-+
-+static enum power_supply_property em_x270_bat_props[] = {
-+ POWER_SUPPLY_PROP_STATUS,
-+ POWER_SUPPLY_PROP_HEALTH,
-+ POWER_SUPPLY_PROP_TECHNOLOGY,
-+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
-+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
-+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
-+ POWER_SUPPLY_PROP_CURRENT_AVG,
-+ POWER_SUPPLY_PROP_CAPACITY, /* in percents! */
-+ POWER_SUPPLY_PROP_TEMP,
-+ POWER_SUPPLY_PROP_MANUFACTURER,
-+ POWER_SUPPLY_PROP_MODEL_NAME,
-+};
-+
-+static void em_x270_bat_check_status(struct em_x270_charger *charger,
-+ union power_supply_propval *val)
-+{
-+ /* FIXME: below code is very crude approximation of actual
-+ states, we need to take into account voltage and current
-+ measurements to determine actual charger state */
-+ if (charger->da9030_status & STATUS_CHDET) {
-+ if (!usb_host_on()) {
-+ if (charger->is_on) {
-+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
-+ }
-+ else {
-+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
-+ }
-+ }
-+ }
-+ else {
-+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-+ }
-+}
-+
-+static void em_x270_bat_check_health(struct em_x270_charger *charger,
-+ union power_supply_propval *val)
-+{
-+ if (charger->da9030_fault & FAULT_LOG_OVER_TEMP) {
-+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
-+ }
-+ else if (charger->da9030_fault & FAULT_LOG_VBAT_OVER) {
-+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
-+ }
-+ else {
-+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
-+ }
-+}
-+
-+static int vbat_interpolate(int reg)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(vbat_ranges); i++ )
-+ if (vbat_ranges[i].voltage == reg) {
-+ pr_debug("%s: voltage = %d, percentage = %d\n",
-+ __FUNCTION__, vbat_ranges[i].voltage,
-+ vbat_ranges[i].percentage);
-+ return vbat_ranges[i].percentage;
-+ }
-+
-+ return 0;
-+}
-+
-+static int em_x270_bat_get_property(struct power_supply *psy,
-+ enum power_supply_property psp,
-+ union power_supply_propval *val)
-+{
-+ u32 reg;
-+ struct em_x270_charger *charger;
-+ charger = container_of(psy, struct em_x270_charger, bat);
-+
-+ switch(psp) {
-+ case POWER_SUPPLY_PROP_STATUS:
-+ em_x270_bat_check_status(charger, val);
-+ break;
-+ case POWER_SUPPLY_PROP_HEALTH:
-+ em_x270_bat_check_health(charger, val);
-+ break;
-+ case POWER_SUPPLY_PROP_TECHNOLOGY:
-+ val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
-+ break;
-+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-+ val->intval = VOLTAGE_MAX_DESIGN;
-+ break;
-+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
-+ val->intval = VOLTAGE_MIN_DESIGN;
-+ break;
-+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-+ reg = charger->adc.vbat_res;
-+ /* V = (reg / 256) * 2.65 + 2.65 (V) */
-+ val->intval = ((reg * 2650000) >> 8) + 2650000;
-+ break;
-+ case POWER_SUPPLY_PROP_CURRENT_AVG:
-+ reg = charger->adc.ichaverage_res;
-+ val->intval = reg; /* reg */
-+ break;
-+ case POWER_SUPPLY_PROP_CAPACITY:
-+ reg = charger->adc.vbat_res;
-+ val->intval = vbat_interpolate(reg);
-+ break;
-+ case POWER_SUPPLY_PROP_TEMP:
-+ reg = charger->adc.tbat_res;
-+ val->intval = tbat_readings[reg];
-+ break;
-+ case POWER_SUPPLY_PROP_MANUFACTURER:
-+ val->strval = "MaxPower";
-+ pr_debug("%s: MFG = %s\n", __FUNCTION__, val->strval);
-+ break;
-+ case POWER_SUPPLY_PROP_MODEL_NAME:
-+ val->strval = "LP555597P6H-FPS";
-+ pr_debug("%s: MODEL = %s\n", __FUNCTION__, val->strval);
-+ break;
-+ default: break;
-+ }
-+
-+ return 0;
-+}
-+
-+static void em_x270_setup_battery(struct power_supply *bat)
-+{
-+ bat->name = "em-x270-battery";
-+ bat->type = POWER_SUPPLY_TYPE_BATTERY;
-+ bat->properties = em_x270_bat_props;
-+ bat->num_properties = ARRAY_SIZE(em_x270_bat_props);
-+ bat->get_property = em_x270_bat_get_property;
-+ bat->use_for_apm = 1;
-+};
-+
-+static void em_x270_chiover_callback(int event, void *_charger)
-+{
-+ /* disable charger */
-+ struct em_x270_charger *charger = _charger;
-+/* pr_info("%s\n", __FUNCTION__); */
-+ em_x270_set_charge(charger, 0);
-+}
-+
-+static void em_x270_tbat_callback(int event, void *_charger)
-+{
-+ /* disable charger */
-+ struct em_x270_charger *charger = _charger;
-+/* pr_info("%s\n", __FUNCTION__); */
-+ em_x270_set_charge(charger, 0);
-+}
-+
-+static void em_x270_vbat_callback(int event, void *_charger)
-+{
-+ struct em_x270_charger *charger = _charger;
-+ da9030_read_adc(&charger->adc);
-+
-+ if (!charger->is_on) {
-+ if (charger->adc.vbat_res < VBAT_LOW_THRESHOLD) {
-+ /* set VBAT threshold for critical */
-+ da9030_set_reg(VBATMON, VBAT_CRIT_THRESHOLD);
-+ da9030_set_reg(VBATMON_1, VBAT_CRIT_THRESHOLD);
-+ apm_queue_event(APM_LOW_BATTERY);
-+ }
-+ else if (charger->adc.vbat_res < VBAT_CRIT_THRESHOLD) {
-+ /* notify the system of battery critical */
-+ apm_queue_event(APM_CRITICAL_SUSPEND);
-+ }
-+ }
-+}
-+
-+static void em_x270_chdet_callback(int event, void *_charger)
-+{
-+ struct em_x270_charger *charger = _charger;
-+ int status = da9030_get_status();
-+ pr_info("%s\n", __FUNCTION__);
-+
-+/* em_x270_check_charger_state(charger); */
-+
-+ /* check if we have "real" charger or our own USB pump */
-+ if (!usb_host_on())
-+ em_x270_set_charge(charger, !!(status & CHRG_CHARGER_ENABLE));
-+}
-+
-+static int em_x270_battery_probe(struct platform_device *pdev)
-+{
-+ struct em_x270_charger *charger;
-+
-+ pr_debug("%s\n", __FUNCTION__);
-+ charger = kzalloc(sizeof(*charger), GFP_KERNEL);
-+ if (charger == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+ the_charger = charger;
-+
-+ charger->dev = &pdev->dev;
-+
-+ charger->ops = &em_x270_charger_ops;
-+
-+ charger->interval = 10 * HZ; /* 10 seconds between monotor runs */
-+ em_x270_setup_battery(&charger->bat);
-+
-+ platform_set_drvdata(pdev, charger);
-+
-+ da9030_enable_adc();
-+
-+ INIT_DELAYED_WORK(&charger->work, em_x270_charging_monitor);
-+ schedule_delayed_work(&charger->work, charger->interval);
-+
-+ charger->debug_file = em_x270_create_debugfs(charger);
-+
-+ em_x270_setup_battery(&charger->bat);
-+
-+ da9030_register_callback(DA9030_IRQ_CHDET,
-+ em_x270_chdet_callback,
-+ charger);
-+ da9030_register_callback(DA9030_IRQ_VBATMON,
-+ em_x270_vbat_callback,
-+ charger);
-+
-+ /* critical condition events */
-+ da9030_register_callback(DA9030_IRQ_CHIOVER,
-+ em_x270_chiover_callback,
-+ charger);
-+ da9030_register_callback(DA9030_IRQ_TBAT,
-+ em_x270_tbat_callback,
-+ charger);
-+
-+ da9030_set_thresholds(TBAT_HIGH_THRESHOLD,
-+ TBAT_RESUME_THRESHOLD,
-+ TBAT_LOW_THRESHOLD,
-+ VBAT_LOW_THRESHOLD);
-+
-+ power_supply_register(&pdev->dev, &charger->bat);
-+
-+ return 0;
-+}
-+
-+static int em_x270_battery_remove(struct platform_device *dev)
-+{
-+ struct em_x270_charger *charger = platform_get_drvdata(dev);
-+
-+ pr_debug("%s\n", __FUNCTION__);
-+ em_x270_remove_debugfs(charger);
-+ cancel_delayed_work(&charger->work);
-+ power_supply_unregister(&charger->bat);
-+
-+ kfree(charger);
-+ the_charger = NULL;
-+
-+ return 0;
-+}
-+
-+static int em_x270_battery_suspend(struct platform_device *pdev,
-+ pm_message_t state)
-+{
-+ pr_info("%s\n", __FUNCTION__);
-+ da9030_set_reg(REG_CONTROL_1_97, RC3_BUCK_EN | RC3_LDO6_EN);
-+ da9030_set_reg(REG_CONTROL_2_98, 0);
-+ da9030_set_reg(REG_CONTROL_2_18,RC2_LDO18_EN);
-+ da9030_set_reg(REG_CONTROL_1_17,
-+ RC1_LDO16_EN | RC1_LDO15_EN | RC1_BUCK2_EN);
-+ da9030_set_reg(WLED_CONTROL, 0);
-+
-+ da9030_set_reg(LED_1_CONTROL, 0);
-+ da9030_set_reg(LED_4_CONTROL, 0);
-+
-+ return 0;
-+}
-+
-+extern int em_x270_lcd_detect(void);
-+static int em_x270_battery_resume(struct platform_device *pdev)
-+{
-+ pr_info("%s\n", __FUNCTION__);
-+
-+ da9030_set_reg(LED_1_CONTROL, 0xff);
-+ da9030_set_reg(LED_4_CONTROL, 0xff);
-+
-+ da9030_set_reg(REG_CONTROL_1_97,
-+ RC3_BUCK_EN | RC3_LDO1_EN | RC3_LDO2_EN |
-+ RC3_LDO3_EN | RC3_LDO6_EN | RC3_LDO7_EN);
-+ da9030_set_reg(REG_CONTROL_2_98,
-+ RC4_SIMCP_ENABLE | RC4_LDO11_EN |
-+ RC4_LDO9_EN | RC4_LDO8_EN);
-+ da9030_set_reg(REG_CONTROL_2_18,
-+ RC2_SIMCP_EN | RC2_LDO18_EN | RC2_LDO19_EN);
-+ da9030_set_reg(REG_CONTROL_1_17,
-+ RC1_LDO17_EN| RC1_LDO16_EN | RC1_LDO15_EN |
-+ RC1_LDO11_EN | RC1_LDO10_EN | RC1_BUCK2_EN);
-+
-+ if (em_x270_lcd_detect() != 0)
-+ pr_info("%s: LCD resume failed\n", __FUNCTION__);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver em_x270_battery_driver = {
-+ .driver = {
-+ .name = "em-x270-battery",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = em_x270_battery_probe,
-+ .remove = em_x270_battery_remove,
-+
-+ .suspend_late = em_x270_battery_suspend,
-+ .resume_early = em_x270_battery_resume,
-+};
-+
-+/**************************************************************************/
-+/* global patform power management */
-+/**************************************************************************/
-+/* suspend/resume button */
-+static irqreturn_t em_x270_suspend_irq(int irq, void *data)
-+{
-+ apm_queue_event(APM_USER_SUSPEND);
-+ return IRQ_HANDLED;
-+}
-+
-+static void em_x270_goto_sleep(suspend_state_t state,
-+ unsigned long alarm_time,
-+ unsigned int alarm_enable)
-+{
-+ pr_info("%s\n", __FUNCTION__);
-+
-+ the_charger->ops = &em_x270_charger_ops_suspend;
-+
-+ RTSR &= RTSR_ALE;
-+ RTAR = RCNR + EM_X270_BATCHK_TIME_SUSPEND;
-+
-+ pxa_pm_enter(state);
-+}
-+
-+static int em_x270_enter_suspend(unsigned long alarm_time,
-+ unsigned int alarm_enable)
-+{
-+ s32 status = 0;
-+ s32 event_a, event_b;
-+ int ret;
-+ int retry = 10;
-+ pr_info("%s\n", __FUNCTION__);
-+
-+ /* make sure power I2C state is consistent */
-+ PWRICR &= ~ICR_IUE;
-+
-+ if ((PEDR & PWER_GPIO1)) {
-+ /* button pressed */
-+ /* clear pending event to avoid interrupt*/
-+ PEDR &= ~PWER_GPIO1;
-+ GEDR0 &= ~GPIO_bit(1);
-+
-+ ret = 0;
-+ }
-+ else if ((PEDR & PWER_RTC)) {
-+ PEDR &= ~PWER_RTC;
-+ pr_debug("%s: timer alarm\n", __FUNCTION__);
-+ em_x270_check_charger_state(the_charger);
-+ ret = 1;
-+ }
-+ else if ((PEDR & PWER_GPIO0)) {
-+ PEDR &= ~PWER_GPIO0;
-+ GEDR0 &= ~GPIO_bit(0);
-+
-+ /* we woke up because of DA9030 event */
-+ do {
-+ status = the_charger->ops->da9030_get_reg(STATUS);
-+ udelay(1000);
-+ } while (status < 0 && retry--);
-+
-+ the_charger->da9030_status = status;
-+ event_a = the_charger->ops->da9030_get_reg(EVENT_A);
-+ event_b = the_charger->ops->da9030_get_reg(EVENT_B);
-+
-+ pr_info("%s: DA9030 wakeup: status: %x, ev_a: %x, ev_b: %x\n",
-+ __FUNCTION__, the_charger->da9030_status,
-+ event_a, event_b);
-+
-+/* if ((the_charger->da9030_status & STATUS_CHDET)) { */
-+ if (event_a & EVENT_A_CHDET) {
-+ pr_info("%s: EVENT_A_CHDET\n", __FUNCTION__);
-+ em_x270_check_charger_state(the_charger);
-+ }
-+ else {
-+ pr_info("%s: What the hell?\n", __FUNCTION__);
-+ }
-+
-+ ret = 1;
-+ }
-+ else {
-+ /* wake up is not DA9030, so continue and let battery
-+ driver check the charger state */
-+ ret = 0;
-+ }
-+
-+ /* get back to sleep */
-+ if (ret)
-+ em_x270_goto_sleep(PM_SUSPEND_MEM, alarm_time, alarm_enable);
-+
-+ return ret;
-+}
-+
-+static int em_x270_pm_enter(suspend_state_t state)
-+{
-+ unsigned long alarm_time = RTAR;
-+ unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
-+
-+ /* pre-suspend */
-+ pr_info("suspending emma\n");
-+ pxa_gpio_mode(38 | GPIO_OUT | GPIO_DFLT_HIGH);
-+
-+ em_x270_goto_sleep(state, alarm_time, alarm_status);
-+
-+ /* check if we were resumed because of charger events */
-+ while (em_x270_enter_suspend(alarm_time, alarm_status))
-+ {}
-+
-+ /* make sure power I2C state is consistent */
-+ PWRICR &= ~ICR_IUE;
-+
-+ /* resume */
-+ pr_info("emma is resumed\n");
-+ the_charger->ops = &em_x270_charger_ops;
-+
-+ return 0;
-+}
-+
-+static struct pm_ops em_x270_pm_ops = {
-+ .enter = em_x270_pm_enter,
-+ .valid = pm_valid_only_mem,
-+};
-+
-+static int em_x270_pm_init(void)
-+{
-+ int ret;
-+ pm_set_ops(&em_x270_pm_ops);
-+
-+ set_irq_type(IRQ_GPIO(1), IRQT_RISING);
-+
-+ ret = platform_driver_register(&em_x270_battery_driver);
-+ if (ret)
-+ return ret;
-+
-+ ret = request_irq(IRQ_GPIO(1), em_x270_suspend_irq, IRQF_DISABLED,
-+ "suspend button", 0);
-+ if (ret) {
-+ platform_driver_unregister(&em_x270_battery_driver);
-+ }
-+
-+ return ret;
-+}
-+
-+static void em_x270_pm_exit(void)
-+{
-+ free_irq(IRQ_GPIO(1), em_x270_suspend_irq);
-+ platform_driver_unregister(&em_x270_battery_driver);
-+}
-+
-+/* make sure I2C is already running */
-+late_initcall(em_x270_pm_init);
-+module_exit(em_x270_pm_exit);
-+
-+MODULE_DESCRIPTION("EM-X270 power manager");
-+MODULE_AUTHOR("Mike Rapoport");
-+MODULE_LICENSE("GPL");
-diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
-index 3d0ad50..402d792 100644
---- a/arch/arm/mach-pxa/em-x270.c
-+++ b/arch/arm/mach-pxa/em-x270.c
-@@ -18,20 +18,26 @@
- #include <linux/mtd/nand.h>
- #include <linux/mtd/partitions.h>
-
--#include <asm/mach-types.h>
-+#include <linux/i2c.h>
-+#include <linux/input.h>
-
-+#include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-
- #include <asm/arch/pxa-regs.h>
- #include <asm/arch/pxafb.h>
- #include <asm/arch/ohci.h>
- #include <asm/arch/mmc.h>
-+#include <asm/arch/pxa27x_keyboard.h>
- #include <asm/arch/bitfield.h>
-
-+#include <asm/arch/udc.h>
-+
-+#include <asm/arch/sharpsl.h>
-+
- #include "generic.h"
-
- /* GPIO IRQ usage */
--#define EM_X270_MMC_PD (105)
- #define EM_X270_ETHIRQ IRQ_GPIO(41)
- #define EM_X270_MMC_IRQ IRQ_GPIO(13)
-
-@@ -213,6 +219,68 @@ static struct platform_device em_x270_nand = {
- }
- };
-
-+/* DA9030 */
-+static struct i2c_board_info em_x270_pmic_info = {
-+ .driver_name = "da9030",
-+ .type = "pmic",
-+ .addr = 0x49,
-+ .irq = IRQ_GPIO(0),
-+};
-+
-+/* Keypad */
-+/* The Demo KeyPad has the following mapping:
-+ * (0,0) (1,2) (2,1)
-+ * (0,2) (1,1) (2,0)
-+ * (0,1) (1,0) (2,2)
-+ */
-+static struct pxa27x_keyboard_platform_data em_x270_kbd = {
-+ .nr_rows = 3,
-+ .nr_cols = 3,
-+ .keycodes = {
-+ { /* row 0 */
-+ -1,
-+ -1,
-+ KEY_LEFT,
-+ },
-+ { /* row 1 */
-+ KEY_UP,
-+ KEY_ENTER,
-+ KEY_DOWN
-+ },
-+ { /* row 2 */
-+ KEY_RIGHT,
-+ -1,
-+ -1
-+ },
-+ },
-+ .gpio_modes = {
-+ (100 | GPIO_ALT_FN_1_IN),
-+ (101 | GPIO_ALT_FN_1_IN),
-+ (102 | GPIO_ALT_FN_1_IN),
-+ (103 | GPIO_ALT_FN_2_OUT),
-+ (104 | GPIO_ALT_FN_2_OUT),
-+ (105 | GPIO_ALT_FN_2_OUT),
-+ },
-+};
-+
-+static struct platform_device em_x270_pxa_keypad = {
-+ .name = "pxa27x-keyboard",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &em_x270_kbd,
-+ },
-+};
-+
-+static struct platform_device em_x270_battery_device = {
-+ .name = "em-x270-battery",
-+ .id = -1,
-+};
-+
-+static struct platform_device em_x270_led_device = {
-+ .name = "em-x270-led",
-+ .id = -1,
-+};
-+
- /* platform devices */
- static struct platform_device *platform_devices[] __initdata = {
- &em_x270_dm9k,
-@@ -220,6 +288,9 @@ static struct platform_device *platform_devices[] __initdata = {
- &em_x270_ts,
- &em_x270_rtc,
- &em_x270_nand,
-+ &em_x270_pxa_keypad,
-+ &em_x270_battery_device,
-+ &em_x270_led_device,
- };
-
-
-@@ -241,6 +312,33 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
- .init = em_x270_ohci_init,
- };
-
-+/*
-+ * USB Client (Gadget/UDC)
-+ */
-+static void em_x270_udc_command(int cmd)
-+{
-+ switch(cmd) {
-+ case PXA2XX_UDC_CMD_CONNECT:
-+ UP2OCR = UP2OCR_HXOE | UP2OCR_DMPUE | UP2OCR_DMPUBE;
-+ break;
-+ case PXA2XX_UDC_CMD_DISCONNECT:
-+/* UP2OCR = UP2OCR_HXS | UP2OCR_HXOE; */
-+ //UP2OCR = UP2OCR_HXOE | UP2OCR_DMPUE | UP2OCR_DMPUBE;
-+ break;
-+ }
-+}
-+
-+static int em_x270_udc_detect(void)
-+{
-+ return 1;
-+}
-+
-+static struct pxa2xx_udc_mach_info em_x270_udc_info __initdata = {
-+ .udc_is_connected = em_x270_udc_detect,
-+ .udc_command = em_x270_udc_command,
-+};
-+
-+
-
- static int em_x270_mci_init(struct device *dev,
- irq_handler_t em_x270_detect_int,
-@@ -256,9 +354,6 @@ static int em_x270_mci_init(struct device *dev,
- pxa_gpio_mode(GPIO110_MMCDAT2_MD);
- pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-- /* EM-X270 uses GPIO13 as SD power enable */
-- pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
--
- err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
-@@ -313,12 +408,19 @@ static struct pxafb_mach_info em_x270_lcd = {
- .num_modes = 1,
- .cmap_inverse = 0,
- .cmap_static = 0,
-- .lccr0 = LCCR0_PAS,
-- .lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
-+
-+ .lccr0 = LCCR0_Act,
-+ .lccr3 = LCCR3_PixFlEdg,
- };
-
- static void __init em_x270_init(void)
- {
-+ /* register PMIC */
-+ i2c_register_board_info(1, &em_x270_pmic_info, 1);
-+
-+ /* setup DA9030 irq */
-+ set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
-+
- /* setup LCD */
- set_pxa_fb_info(&em_x270_lcd);
-
-@@ -329,6 +431,8 @@ static void __init em_x270_init(void)
- pxa_set_mci_info(&em_x270_mci_platform_data);
- pxa_set_ohci_info(&em_x270_ohci_platform_data);
-
-+ pxa_set_udc_info(&em_x270_udc_info);
-+
- /* setup STUART GPIOs */
- pxa_gpio_mode(GPIO46_STRXD_MD);
- pxa_gpio_mode(GPIO47_STTXD_MD);
-@@ -341,9 +445,16 @@ static void __init em_x270_init(void)
-
- /* Setup interrupt for dm9000 */
- set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
-+
-+ PCFR = 0x6;
-+ PSLR = 0xff400000;
-+ PMCR = 0x00000005;
-+ PWER = 0x80000003;
-+ PFER = 0x00000003;
-+ PRER = 0x00000000;
- }
-
--MACHINE_START(EM_X270, "Compulab EM-x270")
-+MACHINE_START(EM_X270, "Compulab EM-X270")
- .boot_params = 0xa0000100,
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
-diff --git a/arch/arm/mach-pxa/pwr-i2c.c b/arch/arm/mach-pxa/pwr-i2c.c
-new file mode 100644
-index 0000000..8a501c4
---- /dev/null
-+++ b/arch/arm/mach-pxa/pwr-i2c.c
-@@ -0,0 +1,539 @@
-+/*
-+ * (C) Copyrihgt 2007 CompuLab, Ltd.
-+ * Mike Rapoport <mike at compulab.co.il>
-+ * Adaptation of U-Boot I2C driver for PXA.
-+ *
-+ * (C) Copyright 2000
-+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio at tin.it
-+ *
-+ * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger at sysgo.de>
-+ *
-+ * (C) Copyright 2003 Pengutronix e.K.
-+ * Robert Schwebel <r.schwebel at pengutronix.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ * Back ported to the 8xx platform (from the 8260 platform) by
-+ * Murray.Jensen at cmst.csiro.au, 27-Jan-01.
-+ */
-+
-+/* #define DEBUG */
-+
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/jiffies.h>
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/pwr-i2c.h>
-+
-+#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
-+#define I2C_ISR_INIT 0x7FF
-+
-+/* Shall the current transfer have a start/stop condition? */
-+#define I2C_COND_NORMAL 0
-+#define I2C_COND_START 1
-+#define I2C_COND_STOP 2
-+
-+/* Shall the current transfer be ack/nacked or being waited for it? */
-+#define I2C_ACKNAK_WAITACK 1
-+#define I2C_ACKNAK_SENDACK 2
-+#define I2C_ACKNAK_SENDNAK 4
-+
-+/* Specify who shall transfer the data (master or slave) */
-+#define I2C_READ 0
-+#define I2C_WRITE 1
-+
-+/* All transfers are described by this data structure */
-+struct i2c_msg {
-+ u8 condition;
-+ u8 acknack;
-+ u8 direction;
-+ u8 data;
-+};
-+
-+/**
-+ * pxa_pwr_i2c_transfer: - reset the host controller
-+ *
-+ */
-+/* static void pxa_pwr_i2c_reset(void) */
-+/* { */
-+/* int i; */
-+
-+/* /\* CKEN |= CKEN_PWRI2C; *\/ */
-+/* /\* PWRICR |= PCFR_PI2C_EN; *\/ */
-+
-+/* /\* /\\* delay 250ms *\\/ *\/ */
-+/* /\* for (i = 0; i < 250; i++) *\/ */
-+/* /\* udelay(1000); *\/ */
-+
-+/* /\* PWRICR &= ~(ICR_MA | ICR_START | ICR_STOP); *\/ */
-+/* /\* PWRICR |= ICR_UR; *\/ */
-+/* /\* PWRISR = 0x7ff; *\/ */
-+
-+/* /\* PWRICR &= ~ICR_UR; *\/ */
-+/* /\* PWRICR = ICR_GCD | ICR_SCLE; *\/ */
-+/* /\* PWRICR |= ICR_IUE; *\/ */
-+/* /\* PWRICR |= 0x8000; *\/ */
-+
-+/* /\* udelay(1000); *\/ */
-+
-+/* return; */
-+
-+/* PWRICR &= ~ICR_IUE; /\* disable unit *\/ */
-+/* PWRICR |= ICR_UR; /\* reset the unit *\/ */
-+/* udelay(100); */
-+/* PWRICR &= ~ICR_IUE; /\* disable unit *\/ */
-+
-+/* CKEN |= CKEN_PWRI2C; */
-+/* PCFR |= PCFR_PI2C_EN; */
-+
-+/* PWRICR = I2C_ICR_INIT; /\* set control register values *\/ */
-+/* PWRISR = I2C_ISR_INIT; /\* set clear interrupt bits *\/ */
-+/* PWRICR |= ICR_IUE; /\* enable unit *\/ */
-+/* udelay(100); */
-+/* } */
-+
-+static void pwr_i2c_abort()
-+{
-+ unsigned long timeout = 250000;
-+ unsigned long time = 0;
-+
-+ while ((time < timeout) && (PWRIBMR & 0x1) == 0) {
-+ unsigned long icr = PWRICR;
-+
-+ icr &= ~ICR_START;
-+ icr |= ICR_ACKNAK | ICR_STOP | ICR_TB;
-+
-+ PWRICR = icr;
-+
-+ udelay(1000);
-+ time += 1000;
-+ }
-+
-+ PWRICR &= ~(ICR_MA | ICR_START | ICR_STOP);
-+}
-+
-+static void pxa_pwr_i2c_reset(void)
-+{
-+ pr_debug("Resetting I2C Controller Unit\n");
-+
-+ /* abort any transfer currently under way */
-+ pwr_i2c_abort();
-+
-+ /* reset according to 9.8 */
-+ PWRICR = ICR_UR;
-+ PWRISR = I2C_ISR_INIT;
-+ PWRISR &= ~ICR_UR;
-+
-+ /* set control register values */
-+ PWRICR = I2C_ICR_INIT;
-+
-+ /* enable unit */
-+ PWRICR |= ICR_IUE;
-+ udelay(100);
-+
-+/* CKEN |= CKEN_PWRI2C; */
-+/* PCFR |= PCFR_PI2C_EN; */
-+}
-+
-+/**
-+ * i2c_isr_set_cleared: - wait until certain bits of the I2C status register
-+ * are set and cleared
-+ *
-+ * @return: 1 in case of success, 0 means timeout (no match within 10 ms).
-+ */
-+static int pxa_pwr_i2c_isr_set_cleared(unsigned long set_mask,
-+ unsigned long cleared_mask)
-+{
-+ int timeout = 10000;
-+
-+ while (((PWRISR & set_mask) != set_mask)
-+ || ((PWRISR & cleared_mask) != 0)) {
-+ udelay(10);
-+ if (timeout-- < 0)
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * pxa_pwr_i2c_transfer: - Transfer one byte over the i2c bus
-+ *
-+ * This function can tranfer a byte over the i2c bus in both directions.
-+ * It is used by the public API functions.
-+ *
-+ * @return: 0: transfer successful
-+ * -EINVAL: message is empty
-+ * -ETIMEDOUT: transmit timeout
-+ * -E: ACK missing
-+ * -ETIMEDOUT: receive timeout
-+ * -EINVAL: illegal parameters
-+ * -EBUSY: bus is busy and couldn't be aquired
-+ */
-+int pxa_pwr_i2c_transfer(struct i2c_msg *msg)
-+{
-+ int ret;
-+
-+ if (!msg)
-+ goto transfer_error_msg_empty;
-+
-+ switch (msg->direction) {
-+ case I2C_WRITE:
-+ /* check if bus is not busy */
-+/* if (!pxa_pwr_i2c_isr_set_cleared(0, (ISR_IBB | ISR_UB))) */
-+/* goto transfer_error_bus_busy; */
-+
-+ /* start transmission */
-+ PWRICR &= ~ICR_START;
-+ PWRICR &= ~ICR_STOP;
-+ PWRIDBR = msg->data;
-+ if (msg->condition == I2C_COND_START)
-+ PWRICR |= ICR_START;
-+ if (msg->condition == I2C_COND_STOP)
-+ PWRICR |= ICR_STOP;
-+ if (msg->acknack == I2C_ACKNAK_SENDNAK)
-+ PWRICR |= ICR_ACKNAK;
-+ if (msg->acknack == I2C_ACKNAK_SENDACK)
-+ PWRICR &= ~ICR_ACKNAK;
-+ PWRICR &= ~ICR_ALDIE;
-+ PWRICR |= ICR_TB;
-+
-+ /* transmit register empty? */
-+ if (!pxa_pwr_i2c_isr_set_cleared(ISR_ITE, 0))
-+ goto transfer_error_transmit_timeout;
-+
-+ /* clear 'transmit empty' state */
-+ PWRISR |= ISR_ITE;
-+
-+ /* wait for ACK from slave */
-+ if (msg->acknack == I2C_ACKNAK_WAITACK)
-+ if (!pxa_pwr_i2c_isr_set_cleared(0, ISR_ACKNAK))
-+ goto transfer_error_ack_missing;
-+ break;
-+ case I2C_READ:
-+ /* check if bus is not busy */
-+/* if (!pxa_pwr_i2c_isr_set_cleared(0, ISR_IBB)) */
-+/* goto transfer_error_bus_busy; */
-+
-+ /* start receive */
-+ PWRICR &= ~ICR_START;
-+ PWRICR &= ~ICR_STOP;
-+ if (msg->condition == I2C_COND_START)
-+ PWRICR |= ICR_START;
-+ if (msg->condition == I2C_COND_STOP)
-+ PWRICR |= ICR_STOP;
-+ if (msg->acknack == I2C_ACKNAK_SENDNAK)
-+ PWRICR |= ICR_ACKNAK;
-+ if (msg->acknack == I2C_ACKNAK_SENDACK)
-+ PWRICR &= ~ICR_ACKNAK;
-+ PWRICR &= ~ICR_ALDIE;
-+ PWRICR |= ICR_TB;
-+
-+ /* receive register full? */
-+ if (!pxa_pwr_i2c_isr_set_cleared(ISR_IRF, 0))
-+ goto transfer_error_receive_timeout;
-+
-+ msg->data = PWRIDBR;
-+
-+ /* clear 'receive empty' state */
-+ PWRISR |= ISR_IRF;
-+
-+ break;
-+ default:
-+ goto transfer_error_illegal_param;
-+
-+ }
-+
-+ return 0;
-+
-+transfer_error_msg_empty:
-+ pr_debug("%s: error: 'msg' is empty\n", __FUNCTION__);
-+ ret = -1;
-+ goto i2c_transfer_finish;
-+
-+transfer_error_transmit_timeout:
-+ pr_debug("%s: error: transmit timeout\n", __FUNCTION__);
-+ ret = -2;
-+ goto i2c_transfer_finish;
-+
-+transfer_error_ack_missing:
-+ pr_debug("%s: error: ACK missing\n", __FUNCTION__);
-+ ret = -3;
-+ goto i2c_transfer_finish;
-+
-+transfer_error_receive_timeout:
-+ pr_debug("%s: error: receive timeout\n", __FUNCTION__);
-+ ret = -4;
-+ goto i2c_transfer_finish;
-+
-+transfer_error_illegal_param:
-+ pr_debug("%s: error: illegal parameters\n", __FUNCTION__);
-+ ret = -5;
-+ goto i2c_transfer_finish;
-+
-+transfer_error_bus_busy:
-+ pr_debug("%s: error: bus is busy\n", __FUNCTION__);
-+ ret = -6;
-+ goto i2c_transfer_finish;
-+
-+i2c_transfer_finish:
-+ pr_debug("%s: ISR: 0x%04x\n", __FUNCTION__, ISR);
-+ return ret;
-+}
-+
-+/* ------------------------------------------------------------------------ */
-+/* API Functions */
-+/* ------------------------------------------------------------------------ */
-+/**
-+ * i2c_probe: - Test if a chip answers for a given i2c address
-+ *
-+ * @chip: address of the chip which is searched for
-+ * @return: 0 if a chip was found, -1 otherwhise
-+ */
-+int pxa_pwr_i2c_probe(u8 chip)
-+{
-+ struct i2c_msg msg;
-+ int ret;
-+
-+ pxa_pwr_i2c_reset();
-+
-+ msg.condition = I2C_COND_START;
-+ msg.acknack = I2C_ACKNAK_WAITACK;
-+ msg.direction = I2C_WRITE;
-+ msg.data = (chip << 1) + 1;
-+ if ((ret = pxa_pwr_i2c_transfer(&msg)))
-+ return ret;
-+
-+ msg.condition = I2C_COND_STOP;
-+ msg.acknack = I2C_ACKNAK_SENDNAK;
-+ msg.direction = I2C_READ;
-+ msg.data = 0x00;
-+ if ((ret = pxa_pwr_i2c_transfer(&msg)))
-+ return ret;
-+
-+ return 0;
-+}
-+
-+/**
-+ * i2c_read: - Read multiple bytes from an i2c device
-+ *
-+ * The higher level routines take into account that this function is only
-+ * called with len < page length of the device (see configuration file)
-+ *
-+ * @chip: address of the chip which is to be read
-+ * @addr: i2c data address within the chip
-+ * @alen: length of the i2c data address (1..2 bytes)
-+ * @buffer: where to write the data
-+ * @len: how much byte do we want to read
-+ * @return: 0 in case of success
-+ */
-+int pxa_pwr_i2c_read(u8 chip, uint addr, int alen, u8 * buffer, int len)
-+{
-+ struct i2c_msg msg;
-+ u8 addr_bytes[3]; /* lowest...highest byte of data address */
-+ int ret;
-+
-+ pr_debug("%s(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",
-+ __FUNCTION__, chip, addr, alen, len);
-+
-+ pxa_pwr_i2c_reset();
-+
-+ /* dummy chip address write */
-+ pr_debug("%s: dummy chip address write\n", __FUNCTION__);
-+ msg.condition = I2C_COND_START;
-+ msg.acknack = I2C_ACKNAK_WAITACK;
-+ msg.direction = I2C_WRITE;
-+ msg.data = (chip << 1);
-+ msg.data &= 0xFE;
-+ if ((ret = pxa_pwr_i2c_transfer(&msg)))
-+ return ret;
-+
-+ /*
-+ * send memory address bytes;
-+ * alen defines how much bytes we have to send.
-+ */
-+ /*addr &= ((1 << CFG_EEPROM_PAGE_WRITE_BITS)-1); */
-+ addr_bytes[0] = (u8) ((addr >> 0) & 0x000000FF);
-+ addr_bytes[1] = (u8) ((addr >> 8) & 0x000000FF);
-+ addr_bytes[2] = (u8) ((addr >> 16) & 0x000000FF);
-+
-+ while (--alen >= 0) {
-+ pr_debug("%s: send memory word address byte %1d\n",
-+ __FUNCTION__, alen);
-+ msg.condition = I2C_COND_NORMAL;
-+ msg.acknack = I2C_ACKNAK_WAITACK;
-+ msg.direction = I2C_WRITE;
-+ msg.data = addr_bytes[alen];
-+ if ((ret = pxa_pwr_i2c_transfer(&msg)))
-+ return ret;
-+ }
-+
-+ /* start read sequence */
-+ pr_debug("%s: start read sequence\n", __FUNCTION__);
-+ msg.condition = I2C_COND_START;
-+ msg.acknack = I2C_ACKNAK_WAITACK;
-+ msg.direction = I2C_WRITE;
-+ msg.data = (chip << 1);
-+ msg.data |= 0x01;
-+ if ((ret = pxa_pwr_i2c_transfer(&msg)))
-+ return ret;
-+
-+ /* read bytes; send NACK at last byte */
-+ while (len--) {
-+ if (len == 0) {
-+ msg.condition = I2C_COND_STOP;
-+ msg.acknack = I2C_ACKNAK_SENDNAK;
-+ } else {
-+ msg.condition = I2C_COND_NORMAL;
-+ msg.acknack = I2C_ACKNAK_SENDACK;
-+ }
-+
-+ msg.direction = I2C_READ;
-+ msg.data = 0x00;
-+ if ((ret = pxa_pwr_i2c_transfer(&msg)))
-+ return ret;
-+
-+ *buffer = msg.data;
-+ pr_debug("%s: reading byte (0x%08x)=0x%02x\n",
-+ __FUNCTION__, (unsigned int)buffer, *buffer);
-+ buffer++;
-+ }
-+
-+ pxa_pwr_i2c_reset();
-+ return 0;
-+}
-+
-+/**
-+ * i2c_write: - Write multiple bytes to an i2c device
-+ *
-+ * The higher level routines take into account that this function is only
-+ * called with len < page length of the device (see configuration file)
-+ *
-+ * @chip: address of the chip which is to be written
-+ * @addr: i2c data address within the chip
-+ * @alen: length of the i2c data address (1..2 bytes)
-+ * @buffer: where to find the data to be written
-+ * @len: how much byte do we want to read
-+ * @return: 0 in case of success
-+ */
-+int pxa_pwr_i2c_write(u8 chip, uint addr, int alen, u8 * buffer, int len)
-+{
-+ struct i2c_msg msg;
-+ u8 addr_bytes[3]; /* lowest...highest byte of data address */
-+ int ret;
-+
-+ pr_debug("%s(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",
-+ __FUNCTION__, chip, addr, alen, len);
-+
-+ pxa_pwr_i2c_reset();
-+
-+ /* chip address write */
-+ pr_debug("%s: chip address write\n", __FUNCTION__);
-+ msg.condition = I2C_COND_START;
-+ msg.acknack = I2C_ACKNAK_WAITACK;
-+ msg.direction = I2C_WRITE;
-+ msg.data = (chip << 1);
-+ msg.data &= 0xFE;
-+ if ((ret = pxa_pwr_i2c_transfer(&msg)))
-+ return ret;
-+
-+ /*
-+ * send memory address bytes;
-+ * alen defines how much bytes we have to send.
-+ */
-+ addr_bytes[0] = (u8) ((addr >> 0) & 0x000000FF);
-+ addr_bytes[1] = (u8) ((addr >> 8) & 0x000000FF);
-+ addr_bytes[2] = (u8) ((addr >> 16) & 0x000000FF);
-+
-+ while (--alen >= 0) {
-+ pr_debug("%s: send memory word address\n", __FUNCTION__);
-+ msg.condition = I2C_COND_NORMAL;
-+ msg.acknack = I2C_ACKNAK_WAITACK;
-+ msg.direction = I2C_WRITE;
-+ msg.data = addr_bytes[alen];
-+ if ((ret = pxa_pwr_i2c_transfer(&msg)))
-+ return ret;
-+ }
-+
-+ /* write bytes; send NACK at last byte */
-+ while (len--) {
-+ pr_debug("%s: writing byte (0x%08x)=0x%02x\n",
-+ __FUNCTION__, (unsigned int)buffer, *buffer);
-+
-+ if (len == 0)
-+ msg.condition = I2C_COND_STOP;
-+ else
-+ msg.condition = I2C_COND_NORMAL;
-+
-+ msg.acknack = I2C_ACKNAK_WAITACK;
-+ msg.direction = I2C_WRITE;
-+ msg.data = *(buffer++);
-+
-+ if ((ret = pxa_pwr_i2c_transfer(&msg)))
-+ return ret;
-+ }
-+
-+ pxa_pwr_i2c_reset();
-+ return 0;
-+}
-+
-+/**
-+ * pxa_pwr_i2c_reg_read: - Read single byte from an i2c device
-+ *
-+ * @chip: address of the chip which is to be read
-+ * @reg: i2c data address within the chip
-+ * @return: data in case of success, negative error code otherwise
-+ */
-+s32 pxa_pwr_i2c_reg_read(u8 chip, u8 reg)
-+{
-+ char buf;
-+ int ret;
-+
-+ pr_debug("%s(chip=0x%02x, reg=0x%02x)\n", __FUNCTION__, chip, reg);
-+ ret = pxa_pwr_i2c_read(chip, reg, 1, &buf, 1);
-+ if (ret == 0)
-+ ret = buf;
-+
-+ return ret;
-+}
-+
-+/**
-+ * pxa_pwr_i2c_reg_write: - Write multiple bytes to an i2c device
-+ *
-+ * The higher level routines take into account that this function is only
-+ * called with len < page length of the device (see configuration file)
-+ *
-+ * @chip: address of the chip which is to be written
-+ * @reg: i2c data address within the chip
-+ * @return: 0 in case of success, negative error code otherwise
-+ */
-+s32 pxa_pwr_i2c_reg_write(u8 chip, u8 reg, u8 val)
-+{
-+ pr_debug("%s(chip=0x%02x, reg=0x%02x, val=0x%02x)\n",
-+ __FUNCTION__, chip, reg, val);
-+ return pxa_pwr_i2c_write(chip, reg, 1, &val, 1);
-+}
-+
-+MODULE_DESCRIPTION("PXA Power I2C");
-+MODULE_AUTHOR("Mike Rapoport");
-+MODULE_LICENSE("GPL");
-diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
-index 203371a..36b695f 100644
---- a/arch/arm/mach-pxa/pxa27x.c
-+++ b/arch/arm/mach-pxa/pxa27x.c
-@@ -243,7 +243,11 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
- case PM_SUSPEND_MEM:
- /* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
-- pxa27x_cpu_suspend(PWRMODE_SLEEP);
-+#ifdef CONFIG_MACH_EM_X270
-+ pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
-+#else
-+ pxa27x_cpu_suspend(PWRMODE_SLEEP);
-+#endif
- break;
- }
- }
-diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
-index bae47e1..a16e532 100644
---- a/arch/arm/mach-pxa/spitz.c
-+++ b/arch/arm/mach-pxa/spitz.c
-@@ -349,6 +349,32 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
-
-
- /*
-+ * USB Client (Gadget/UDC)
-+ */
-+static void spitz_udc_command(int cmd)
-+{
-+ switch(cmd) {
-+ case PXA2XX_UDC_CMD_CONNECT:
-+ UP2OCR = UP2OCR_HXOE | UP2OCR_DMPUE | UP2OCR_DMPUBE;
-+ break;
-+ case PXA2XX_UDC_CMD_DISCONNECT:
-+ //UP2OCR = UP2OCR_HXOE | UP2OCR_DMPUE | UP2OCR_DMPUBE;
-+ break;
-+ }
-+}
-+
-+static int spitz_udc_detect(void)
-+{
-+ return 1;
-+}
-+
-+static struct pxa2xx_udc_mach_info spitz_udc_info __initdata = {
-+ .udc_is_connected = spitz_udc_detect,
-+ .udc_command = spitz_udc_command,
-+};
-+
-+
-+/*
- * USB Host (OHCI)
- */
- static int spitz_ohci_init(struct device *dev)
-@@ -499,6 +525,7 @@ static void __init common_init(void)
- pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-+ pxa_set_udc_info(&spitz_udc_info);
- pxa_set_mci_info(&spitz_mci_platform_data);
- pxa_set_ohci_info(&spitz_ohci_platform_data);
- pxa_set_ficp_info(&spitz_ficp_platform_data);
-diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
-index 2e1c24f..f80f2b1 100644
---- a/drivers/i2c/chips/Kconfig
-+++ b/drivers/i2c/chips/Kconfig
-@@ -163,4 +163,17 @@ config MENELAUS
- and other features that are often used in portable devices like
- cell phones and PDAs.
-
-+config DA9030
-+ tristate "Dialog Semiconductor DA9030 power management chip"
-+ depends on EXPERIMENTAL && EMBEDDED
-+ help
-+ If you say yes here you get support for the Dialog
-+ Semiconductor DA9030 power management chip.
-+ This includes voltage regulators, lithium ion/polymer battery
-+ charging, and other features that are often used in portable
-+ devices like PDAs, cell phones and cameras.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called da9030.
-+
- endmenu
-diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
-index ca924e1..69f545c 100644
---- a/drivers/i2c/chips/Makefile
-+++ b/drivers/i2c/chips/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
- obj-$(CONFIG_TPS65010) += tps65010.o
- obj-$(CONFIG_MENELAUS) += menelaus.o
- obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
-+obj-$(CONFIG_DA9030) += da9030.o
-
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
-diff --git a/drivers/i2c/chips/da9030.c b/drivers/i2c/chips/da9030.c
-new file mode 100644
-index 0000000..9791272
---- /dev/null
-+++ b/drivers/i2c/chips/da9030.c
-@@ -0,0 +1,1213 @@
-+/*
-+ * Dialog Semiconductor DA9030 power management IC driver
-+ *
-+ * Copyright (C) 2007 Compulab, Ltd.
-+ * Mike Rapoport <mike at compulab.co.il>
-+ *
-+ * Some parts based on menelaus.c:
-+ * Copyright (C) 2004 Texas Instruments, Inc.
-+ * Copyright (C) 2005, 2006 Nokia Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/ctype.h>
-+#include <linux/uaccess.h>
-+#include <linux/i2c.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/da9030.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/random.h>
-+#include <linux/mutex.h>
-+
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-+
-+#include "da9030.h"
-+
-+#define DRIVER_NAME "da9030"
-+
-+static unsigned short normal_i2c[] = { 0x49, I2C_CLIENT_END };
-+
-+I2C_CLIENT_INSMOD;
-+
-+struct da9030 {
-+ struct mutex lock;
-+ struct i2c_client *client;
-+
-+ struct work_struct event_work;
-+
-+ /* there are 24 interrupts */
-+ void (*callbacks[24])(int event, void *data);
-+ void *callbacks_data[24];
-+
-+ struct dentry *debug_file;
-+};
-+
-+/* I hardly believe there can be more than 1 such chip in the system,
-+ so keeping its global instance won't really hurt */
-+static struct da9030 *the_da9030;
-+
-+unsigned char defined_regs[] = {
-+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a,
-+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
-+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
-+ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a,
-+ 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x4b,
-+ 0x50, 0x51,
-+ 0x60, 0x61, 0x62, 0x63,
-+ 0x80, 0x81,
-+ 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0x9b,
-+ 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6,
-+ 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba,
-+};
-+
-+static inline int is_reg_valid(u32 reg)
-+{
-+ int i;
-+ for (i = 0; i < ARRAY_SIZE(defined_regs); i++)
-+ if (reg == defined_regs[i])
-+ return 1;
-+
-+ return 0;
-+}
-+
-+s32 da9030_get_reg(u32 reg)
-+{
-+ if (!is_reg_valid(reg))
-+ return -EINVAL;
-+
-+ return i2c_smbus_read_byte_data(the_da9030->client, reg);
-+}
-+EXPORT_SYMBOL(da9030_get_reg);
-+
-+s32 da9030_set_reg(u32 reg, u8 val)
-+{
-+ if (!is_reg_valid(reg))
-+ return -EINVAL;
-+
-+ return i2c_smbus_write_byte_data(the_da9030->client, reg, val);
-+}
-+EXPORT_SYMBOL(da9030_set_reg);
-+
-+static s32 da9030_update_reg_bits(u32 reg, int bits, int shift, int val)
-+{
-+ int ret;
-+ int new_val;
-+
-+ mutex_lock(&the_da9030->lock);
-+ ret = da9030_get_reg(reg);
-+ if (ret < 0)
-+ goto out;
-+
-+ new_val = reg & ~(((1 << bits) - 1) << shift);
-+ new_val |= (val << shift);
-+
-+ ret = da9030_set_reg(reg, new_val);
-+ mutex_unlock(&the_da9030->lock);
-+
-+out:
-+ return ret;
-+}
-+
-+int da9030_get_status(void)
-+{
-+ s32 ret;
-+
-+ mutex_lock(&the_da9030->lock);
-+ ret = da9030_get_reg(STATUS);
-+ mutex_unlock(&the_da9030->lock);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL(da9030_get_status);
-+
-+int da9030_get_fault_log(void)
-+{
-+ s32 ret;
-+
-+ mutex_lock(&the_da9030->lock);
-+ ret = da9030_get_reg(FAULT_LOG);
-+ mutex_unlock(&the_da9030->lock);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL(da9030_get_fault_log);
-+
-+void da9030_read_adc(struct da9030_adc_res *adc)
-+{
-+ mutex_lock(&the_da9030->lock);
-+
-+ adc->vbat_res = da9030_get_reg(VBAT_RES);
-+ adc->vbatmin_res = da9030_get_reg(VBATMIN_RES);
-+ adc->vbatmintxon = da9030_get_reg(VBATMINTXON_RES);
-+ adc->ichmax_res = da9030_get_reg(ICHMAX_RES);
-+ adc->ichmin_res = da9030_get_reg(ICHMIN_RES);
-+ adc->ichaverage_res = da9030_get_reg(ICHAVERAGE_RES);
-+ adc->vchmax_res = da9030_get_reg(VCHMAX_RES);
-+ adc->vchmin_res = da9030_get_reg(VCHMIN_RES);
-+ adc->tbat_res = da9030_get_reg(TBAT_RES);
-+ adc->adc_in4_res = da9030_get_reg(ADC_IN4_RES);
-+ adc->adc_in5_res = da9030_get_reg(ADC_IN5_RES);
-+
-+ mutex_unlock(&the_da9030->lock);
-+}
-+EXPORT_SYMBOL(da9030_read_adc);
-+
-+void da9030_enable_adc(void)
-+{
-+ /* enable automatic A/D measurements */
-+ mutex_lock(&the_da9030->lock);
-+
-+ da9030_set_reg(ADC_MAN_CONTROL,
-+ ADC_LDO_INT_ENABLE | ADC_TBATREF_ENABLE);
-+ da9030_set_reg(ADC_MAN_CONTROL_1,
-+ ADC_LDO_INT_ENABLE | ADC_TBATREF_ENABLE);
-+ da9030_set_reg(ADC_AUTO_CONTROL_1,
-+ ADC_TBAT_ENABLE | ADC_VBAT_IN_TXON | ADC_VCH_ENABLE |
-+ ADC_ICH_ENABLE | ADC_VBAT_ENABLE |
-+ ADC_AUTO_SLEEP_ENABLE);
-+ da9030_set_reg(ADC_AUTO_CONTROL,
-+ ADC_TBAT_ENABLE | ADC_VBAT_IN_TXON | ADC_VCH_ENABLE |
-+ ADC_ICH_ENABLE | ADC_VBAT_ENABLE |
-+ ADC_AUTO_SLEEP_ENABLE);
-+
-+ mutex_unlock(&the_da9030->lock);
-+}
-+EXPORT_SYMBOL(da9030_enable_adc);
-+
-+void da9030_set_wled(int on, unsigned int brightness)
-+{
-+ u8 val;
-+
-+ mutex_lock(&the_da9030->lock);
-+
-+ if (on)
-+ val = WLED_CP_ENABLE | (brightness & 0x7);
-+ else
-+ val = da9030_get_reg(WLED_CONTROL) & ~WLED_CP_ENABLE;
-+
-+ da9030_set_reg(WLED_CONTROL, val);
-+
-+ mutex_unlock(&the_da9030->lock);
-+}
-+EXPORT_SYMBOL(da9030_set_wled);
-+
-+int da9030_set_charger(int on, unsigned int mA, unsigned int mV)
-+{
-+ int ret;
-+ u8 val = 0;
-+ if (on) {
-+ if (mA >= 1500 || mV < 4000 || mV > 4350)
-+ return -EINVAL;
-+
-+ val = CHRG_CHARGER_ENABLE;
-+ val |= (mA / 100) << 3;
-+ val |= (mV - 4000) / 50;
-+ }
-+
-+ mutex_lock(&the_da9030->lock);
-+ ret = da9030_set_reg(CHARGE_CONTROL, val);
-+ mutex_unlock(&the_da9030->lock);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL(da9030_set_charger);
-+
-+void da9030_get_charger(int *on, unsigned int *mA, unsigned int *mV)
-+{
-+ s32 val;
-+
-+ mutex_lock(&the_da9030->lock);
-+
-+ val = da9030_get_reg(CHARGE_CONTROL);
-+
-+ mutex_unlock(&the_da9030->lock);
-+
-+ if (on)
-+ *on = (val & CHRG_CHARGER_ENABLE) ? 1 : 0;
-+
-+ if (mA)
-+ *mA = ((val >> 3) & 0xf) * 100;
-+
-+ if (mV)
-+ *mV = (val & 0x7) * 50 + 4000;
-+}
-+EXPORT_SYMBOL(da9030_get_charger);
-+
-+int da9030_set_led(int led, int on,
-+ enum da9030_led_rate rate,
-+ enum da9030_led_duty_cycle duty,
-+ enum da9030_led_pwm_chop pwm_chop)
-+{
-+ int reg;
-+ int ret;
-+
-+ u8 val = 0;
-+
-+ if (led > 4)
-+ return -EINVAL;
-+
-+ reg = LED_1_CONTROL + led;
-+ if (on) {
-+ val = LED_ENABLE;
-+ val |= (rate & 0x3) << 5;
-+ val |= (duty & 0x3) << 3;
-+ val |= (pwm_chop & 0x7);
-+ }
-+
-+ mutex_lock(&the_da9030->lock);
-+ ret = da9030_set_reg(reg, val);
-+ mutex_unlock(&the_da9030->lock);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL(da9030_set_led);
-+
-+void da9030_set_thresholds(unsigned int tbathighp, unsigned int tbathighn,
-+ unsigned int tbatlow, unsigned int vbatmon)
-+{
-+ mutex_lock(&the_da9030->lock);
-+
-+ da9030_set_reg(TBATHIGHP, tbathighp);
-+ da9030_set_reg(TBATHIGHN, tbathighn);
-+ da9030_set_reg(TBATLOW, tbatlow);
-+ da9030_set_reg(VBATMONTXON, vbatmon);
-+ da9030_set_reg(VBATMON, vbatmon);
-+
-+ da9030_set_reg(TBATHIGHP_1, tbathighp);
-+ da9030_set_reg(TBATHIGHN_1, tbathighn);
-+ da9030_set_reg(TBATLOW_1, tbatlow);
-+ da9030_set_reg(VBATMONTXMON_1, vbatmon);
-+ da9030_set_reg(VBATMON_1, vbatmon);
-+
-+ mutex_unlock(&the_da9030->lock);
-+}
-+EXPORT_SYMBOL(da9030_set_thresholds);
-+
-+struct da9030_vtg_value {
-+ u16 vtg;
-+ u16 val;
-+};
-+
-+struct da9030_vtg_value da9030_vtg_1V8_3V2[] = {
-+ {1800, 0x0},
-+ {1900, 0x1},
-+ {2000, 0x2},
-+ {2100, 0x3},
-+ {2200, 0x4},
-+ {2300, 0x5},
-+ {2400, 0x6},
-+ {2500, 0x7},
-+ {2600, 0x8},
-+ {2700, 0x9},
-+ {2800, 0xa},
-+ {2900, 0xb},
-+ {3000, 0xc},
-+ {3100, 0xd},
-+ {3200, 0xe},
-+ {3200, 0xf},
-+};
-+
-+struct da9030_vtg_value da9030_vtg_1V1_2V65[] = {
-+ {1100, 0x0},
-+ {1150, 0x1},
-+ {1200, 0x2},
-+ {1250, 0x3},
-+ {1300, 0x4},
-+ {1350, 0x5},
-+ {1400, 0x6},
-+ {1450, 0x7},
-+ {1500, 0x8},
-+ {1550, 0x9},
-+ {1600, 0xa},
-+ {1650, 0xb},
-+ {1700, 0xc},
-+ {1750, 0xd},
-+ {1800, 0xe},
-+ {1850, 0xf},
-+ {1900, 0x10},
-+ {1950, 0x11},
-+ {2000, 0x12},
-+ {2050, 0x13},
-+ {2100, 0x14},
-+ {2150, 0x15},
-+ {2200, 0x16},
-+ {2250, 0x17},
-+ {2300, 0x18},
-+ {2350, 0x19},
-+ {2400, 0x1a},
-+ {2450, 0x1b},
-+ {2500, 0x1c},
-+ {2550, 0x1d},
-+ {2600, 0x1e},
-+ {2650, 0x1f},
-+};
-+
-+struct da9030_vtg_value da9030_vtg_2V76_2V94[] = {
-+ {2760, 0x7},
-+ {2790, 0x6},
-+ {2820, 0x5},
-+ {2850, 0x4},
-+ {2850, 0x3},
-+ {2880, 0x1},
-+ {2910, 0x2},
-+ {2940, 0x3},
-+};
-+
-+struct da9030_vtg_value da9030_vtg_0V85_1V625[] = {
-+ {850, 0x0},
-+ {875, 0x1},
-+ {900, 0x2},
-+ {925, 0x3},
-+ {950, 0x4},
-+ {975, 0x5},
-+ {1000, 0x6},
-+ {1025, 0x7},
-+ {1050, 0x8},
-+ {1075, 0x9},
-+ {1100, 0xa},
-+ {1125, 0xb},
-+ {1150, 0xc},
-+ {1175, 0xd},
-+ {1200, 0xe},
-+ {1225, 0xf},
-+ {1250, 0x10},
-+ {1275, 0x11},
-+ {1300, 0x12},
-+ {1325, 0x13},
-+ {1350, 0x14},
-+ {1375, 0x15},
-+ {1400, 0x16},
-+ {1425, 0x17},
-+ {1450, 0x18},
-+ {1475, 0x19},
-+ {1500, 0x1a},
-+ {1525, 0x1b},
-+ {1550, 0x1c},
-+ {1575, 0x1d},
-+ {1600, 0x1e},
-+ {1625, 0x1f},
-+};
-+
-+struct ldo_param {
-+ u8 reg;
-+ u8 shift;
-+ u8 bits;
-+};
-+
-+struct da9030_ldo {
-+ const char *name;
-+
-+ struct ldo_param vtg;
-+ struct ldo_param sleep;
-+ struct ldo_param lock;
-+
-+ /* several LDOs have two enable/disable bits */
-+ struct ldo_param enable[2];
-+
-+ struct da9030_vtg_value *values;
-+ int values_count;
-+};
-+
-+static struct da9030_ldo da9030_ldos[] = {
-+ [0] = {
-+ .name = "LDO1",
-+ .vtg = {
-+ .reg = LDO_1,
-+ .shift = 0,
-+ .bits = 5,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_97,
-+ .shift = 1,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = LDO_1,
-+ .shift = 5,
-+ .bits = 2,
-+ },
-+ .lock = {
-+ .reg = REG_SLEEP_CONTROL1,
-+ .shift = 0,
-+ .bits = 2,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [1] = {
-+ .name = "LDO2",
-+ .vtg = {
-+ .reg = LDO_2_3,
-+ .shift = 0,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_97,
-+ .shift = 2,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = REG_SLEEP_CONTROL1,
-+ .shift = 2,
-+ .bits = 2,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [2] = {
-+ .name = "LDO3",
-+ .vtg = {
-+ .reg = LDO_2_3,
-+ .shift = 4,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_97,
-+ .shift = 3,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = REG_SLEEP_CONTROL1,
-+ .shift = 4,
-+ .bits = 2,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [3] = {
-+ .name = "LDO4",
-+ .vtg = {
-+ .reg = LDO_4_5,
-+ .shift = 0,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_97,
-+ .shift = 4,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = REG_SLEEP_CONTROL1,
-+ .shift = 6,
-+ .bits = 2,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [4] = {
-+ .name = "LDO5",
-+ .vtg = {
-+ .reg = LDO_4_5,
-+ .shift = 4,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_97,
-+ .shift = 5,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = REG_SLEEP_CONTROL2,
-+ .shift = 0,
-+ .bits = 2,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [5] = {
-+ .name = "LDO6",
-+ .vtg = {
-+ .reg = LDO_6_SIMCP,
-+ .shift = 0,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_97,
-+ .shift = 6,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = 0,
-+ .shift = 0,
-+ .bits = 0,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [6] = {
-+ .name = "LDO7",
-+ .vtg = {
-+ .reg = LDO_7_8,
-+ .shift = 0,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_97,
-+ .shift = 7,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = REG_SLEEP_CONTROL2,
-+ .shift = 2,
-+ .bits = 2,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [7] = {
-+ .name = "LDO8",
-+ .vtg = {
-+ .reg = LDO_7_8,
-+ .shift = 4,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_2_98,
-+ .shift = 0,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = REG_SLEEP_CONTROL2,
-+ .shift = 4,
-+ .bits = 2,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [8] = {
-+ .name = "LDO9",
-+ .vtg = {
-+ .reg = LDO_9_12,
-+ .shift = 0,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_2_98,
-+ .shift = 1,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = REG_SLEEP_CONTROL2,
-+ .shift = 6,
-+ .bits = 2,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [9] = {
-+ .name = "LDO10",
-+ .vtg = {
-+ .reg = LDO_10_11,
-+ .shift = 0,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_17,
-+ .shift = 1,
-+ .bits = 1,
-+ },
-+ .enable[1] = {
-+ .reg = REG_CONTROL_2_98,
-+ .shift = 2,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = 0,
-+ .shift = 0,
-+ .bits = 0,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [10] = {
-+ .name = "LDO11",
-+ .vtg = {
-+ .reg = LDO_10_11,
-+ .shift = 4,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_17,
-+ .shift = 2,
-+ .bits = 1,
-+ },
-+ .enable[1] = {
-+ .reg = REG_CONTROL_2_98,
-+ .shift = 3,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = 0,
-+ .shift = 0,
-+ .bits = 0,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [11] = {
-+ .name = "LDO12",
-+ .vtg = {
-+ .reg = LDO_9_12,
-+ .shift = 4,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_2_98,
-+ .shift = 4,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = REG_SLEEP_CONTROL3,
-+ .shift = 0,
-+ .bits = 2,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [12] = {
-+ .name = "LDO13",
-+ .vtg = {
-+ .reg = 0,
-+ .shift = 0,
-+ .bits = 0,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_17,
-+ .shift = 3,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = 0,
-+ .shift = 0,
-+ .bits = 0,
-+ },
-+ .values = NULL,
-+ .values_count = 0,
-+ },
-+ [13] = {
-+ .name = "LDO14",
-+ .vtg = {
-+ .reg = LDO_14_16,
-+ .shift = 0,
-+ .bits = 3,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_17, /* FIXME: or 2_98? */
-+ .shift = 4,
-+ .bits = 1,
-+ },
-+ .enable[1] = {
-+ .reg = REG_CONTROL_2_98, /* FIXME: or 2_98? */
-+ .shift = 5,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = 0,
-+ .shift = 0,
-+ .bits = 0,
-+ },
-+ .values = da9030_vtg_2V76_2V94,
-+ .values_count = ARRAY_SIZE(da9030_vtg_2V76_2V94),
-+ },
-+ [14] = {
-+ .name = "LDO15",
-+ .vtg = {
-+ .reg = LDO_15,
-+ .shift = 0,
-+ .bits = 5,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_17,
-+ .shift = 5,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = 0,
-+ .shift = 0,
-+ .bits = 0,
-+ },
-+ .lock = {
-+ .reg = LDO_15,
-+ .shift = 5,
-+ .bits = 3,
-+ },
-+ .values = da9030_vtg_1V1_2V65,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V1_2V65),
-+ },
-+ [15] = {
-+ .name = "LDO16",
-+ .vtg = {
-+ .reg = LDO_14_16,
-+ .shift = 3,
-+ .bits = 5,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_17,
-+ .shift = 6,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = 0,
-+ .shift = 0,
-+ .bits = 0,
-+ },
-+ .values = da9030_vtg_1V1_2V65,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V1_2V65),
-+ },
-+ [16] = {
-+ .name = "LDO17",
-+ .vtg = {
-+ .reg = LDO_17_SIMCP0,
-+ .shift = 0,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_1_17,
-+ .shift = 7,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = 0,
-+ .shift = 0,
-+ .bits = 0,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [17] = {
-+ .name = "LDO18",
-+ .vtg = {
-+ .reg = LDO_18_19,
-+ .shift = 0,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_2_18,
-+ .shift = 2,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = 0,
-+ .shift = 0,
-+ .bits = 0,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+ [18] = {
-+ .name = "LDO19",
-+ .vtg = {
-+ .reg = LDO_18_19,
-+ .shift = 4,
-+ .bits = 4,
-+ },
-+ .enable[0] = {
-+ .reg = REG_CONTROL_2_18,
-+ .shift = 1,
-+ .bits = 1,
-+ },
-+ .sleep = {
-+ .reg = 0,
-+ .shift = 0,
-+ .bits = 0,
-+ },
-+ .values = da9030_vtg_1V8_3V2,
-+ .values_count = ARRAY_SIZE(da9030_vtg_1V8_3V2),
-+ },
-+};
-+
-+static int da9030_get_vtg_value(int vtg, const struct da9030_vtg_value *tbl,
-+ int n)
-+{
-+ int i;
-+
-+ for (i = 0; i < n; i++, tbl++)
-+ if (tbl->vtg == vtg)
-+ return tbl->val;
-+ return -EINVAL;
-+}
-+
-+static int da9030_set_ldo_volt(struct da9030_ldo *ldo, unsigned int mV)
-+{
-+ int val;
-+
-+ val = da9030_get_vtg_value(mV, ldo->values, ldo->values_count);
-+ if (val < 0)
-+ return val;
-+
-+ return da9030_update_reg_bits(ldo->vtg.reg, ldo->vtg.bits,
-+ ldo->vtg.shift, val);
-+}
-+
-+static int da9030_enable_ldo(struct da9030_ldo *ldo, int enable)
-+{
-+ int ret;
-+
-+ ret = da9030_update_reg_bits(ldo->enable[0].reg, ldo->enable[1].bits,
-+ ldo->enable[0].shift, enable);
-+
-+ if (ret < 0)
-+ return ret;
-+
-+ if (unlikely(ldo->enable[1].reg != 0))
-+ ret = da9030_update_reg_bits(ldo->enable[1].reg,
-+ ldo->enable[1].bits,
-+ ldo->enable[1].shift, enable);
-+
-+ return ret;
-+}
-+
-+static int da9030_set_ldo_sleep(struct da9030_ldo *ldo,
-+ enum da9030_ldo_sleep_mode sleep_mode)
-+{
-+ return da9030_update_reg_bits(ldo->sleep.reg, ldo->sleep.bits,
-+ ldo->sleep.shift, sleep_mode);
-+}
-+
-+int da9030_set_ldo(int ldo_num, int on, unsigned int mV,
-+ enum da9030_ldo_sleep_mode sleep_mode)
-+{
-+ struct da9030_ldo *ldo;
-+ int ret;
-+
-+ if (ldo_num < 0 || ldo_num > ARRAY_SIZE(da9030_ldos))
-+ return -EINVAL;
-+
-+ ldo = &da9030_ldos[ldo_num];
-+
-+ ret = da9030_set_ldo_volt(ldo, mV);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = da9030_enable_ldo(ldo, on);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = da9030_set_ldo_sleep(ldo, sleep_mode);
-+ if (ret < 0)
-+ return ret;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(da9030_set_ldo);
-+
-+int da9030_set_buck(int buck, int on, unsigned int mV, int flags)
-+{
-+ /* FIXME: implement */
-+ return 0;
-+}
-+EXPORT_SYMBOL(da9030_set_buck);
-+
-+static void da9030_disable_irq(unsigned int irq)
-+{
-+ int reg, val;
-+
-+ if (irq < 8) {
-+ reg = IRQ_MASK_A;
-+ val = 1 << irq;
-+ } else if (irq < 16) {
-+ reg = IRQ_MASK_B;
-+ val = 1 << (irq - 8);
-+ } else {
-+ reg = IRQ_MASK_C;
-+ val = 1 << (irq - 16);
-+ }
-+
-+ i2c_smbus_write_byte_data(
-+ the_da9030->client, reg,
-+ i2c_smbus_read_byte_data(the_da9030->client, reg) | val);
-+}
-+
-+static void da9030_enable_irq(unsigned int irq)
-+{
-+ int reg, val;
-+
-+ if (irq < 8) {
-+ reg = IRQ_MASK_A;
-+ val = 1 << irq;
-+ } else if (irq < 16) {
-+ reg = IRQ_MASK_B;
-+ val = 1 << (irq - 8);
-+ } else {
-+ reg = IRQ_MASK_C;
-+ val = 1 << (irq - 16);
-+ }
-+
-+ i2c_smbus_write_byte_data(
-+ the_da9030->client, reg,
-+ i2c_smbus_read_byte_data(the_da9030->client, reg) & ~val);
-+}
-+
-+int da9030_register_callback(int event,
-+ void (*callback)(int event, void *data),
-+ void *data)
-+{
-+ int ret;
-+
-+ if (event < 0 || event > 23)
-+ return -EINVAL;
-+
-+ mutex_lock(&the_da9030->lock);
-+ if (the_da9030->callbacks[event])
-+ ret = -EBUSY;
-+ else {
-+ the_da9030->callbacks[event] = callback;
-+ the_da9030->callbacks_data[event] = data;
-+ da9030_enable_irq(event);
-+ ret = 0;
-+ }
-+ mutex_unlock(&the_da9030->lock);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL(da9030_register_callback);
-+
-+void da9030_unregister_callback(int event)
-+{
-+ mutex_lock(&the_da9030->lock);
-+
-+ da9030_disable_irq(event);
-+ the_da9030->callbacks[event] = NULL;
-+ the_da9030->callbacks_data[event] = 0;
-+
-+ mutex_unlock(&the_da9030->lock);
-+}
-+EXPORT_SYMBOL(da9030_unregister_callback);
-+
-+#ifdef CONFIG_DEBUG_FS
-+#define MAX_BUF 256
-+
-+static int da9030_debug_show(struct seq_file *s, void *data)
-+{
-+ int i, res = 0;
-+ struct da9030 *da9030 = s->private;
-+ struct i2c_client *client = da9030->client;
-+
-+ seq_printf(s, "DA9030 state: da = %p, cl = %p, s->private = %p\n",
-+ da9030, client, s->private);
-+
-+ for (i = 0; i < ARRAY_SIZE(defined_regs); i++) {
-+ res = i2c_smbus_read_byte_data(client, defined_regs[i]);
-+ seq_printf(s, "%02x %x\n", defined_regs[i], res);
-+ }
-+ return 0;
-+}
-+
-+static int da9030_debug_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, da9030_debug_show, inode->i_private);
-+}
-+
-+ssize_t da9030_debug_write(struct file *f, const char __user *buf, size_t len,
-+ loff_t *off)
-+{
-+ char buffer[MAX_BUF];
-+ int reg, val;
-+ char *endp;
-+ struct da9030 *da9030 = ((struct seq_file *)f->private_data)->private;
-+ struct i2c_client *client = da9030->client;
-+
-+ if (len > MAX_BUF) {
-+ printk(KERN_INFO "%s: large buffer\n", __FUNCTION__);
-+ len = MAX_BUF;
-+ }
-+
-+ if (copy_from_user(buffer, buf, len)) {
-+ printk(KERN_INFO "%s: copy_from_user failed\n", __FUNCTION__);
-+ return -EFAULT;
-+ }
-+ buffer[len] = '\0';
-+
-+ reg = simple_strtoul(buffer, &endp, 0);
-+ while (endp && isspace(*endp))
-+ endp++;
-+
-+ val = simple_strtoul(endp, 0, 0);
-+
-+ i2c_smbus_write_byte_data(client, reg, val);
-+
-+ return len;
-+}
-+
-+static const struct file_operations debug_fops = {
-+ .open = da9030_debug_open,
-+ .read = seq_read,
-+ .write = da9030_debug_write,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+static struct dentry *da9030_create_debugfs(struct da9030 *da9030)
-+{
-+ da9030->debug_file = debugfs_create_file("da9030", 0666, 0, da9030,
-+ &debug_fops);
-+ return da9030->debug_file;
-+}
-+
-+static void da9030_remove_debugfs(struct da9030 *da9030)
-+{
-+ debugfs_remove(da9030->debug_file);
-+}
-+#else
-+#define da9030_create_debugfs(x) NULL
-+#define da9030_remove_debugfs(x) do {} while (0)
-+#endif
-+
-+static irqreturn_t da9030_irq(int irq, void *_da9030)
-+{
-+ struct da9030 *da9030 = _da9030;
-+
-+ (void)schedule_work(&da9030->event_work);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void da9030_irq_worker(struct work_struct *work)
-+{
-+ struct da9030 *da9030 = container_of(work, struct da9030, event_work);
-+ void (*callback)(int event, void *data);
-+ u32 pending = 0;
-+ u32 mask = 0;
-+ int i;
-+
-+ while (1) {
-+ pending = (i2c_smbus_read_byte_data(da9030->client,
-+ EVENT_A)) |
-+ ((i2c_smbus_read_byte_data(da9030->client,
-+ EVENT_B)) << 8) |
-+ ((i2c_smbus_read_byte_data(da9030->client,
-+ EVENT_C)) << 16);
-+
-+ mask = (i2c_smbus_read_byte_data(da9030->client,
-+ IRQ_MASK_A)) |
-+ ((i2c_smbus_read_byte_data(da9030->client,
-+ IRQ_MASK_B)) << 8) |
-+ ((i2c_smbus_read_byte_data(da9030->client,
-+ IRQ_MASK_C)) << 16);
-+ pending &= ~mask;
-+
-+ if (!pending)
-+ return;
-+
-+ while (pending) {
-+ i = __ffs(pending);
-+ callback = da9030->callbacks[i];
-+ if (callback)
-+ callback(i, da9030->callbacks_data[i]);
-+ pending &= ~(1 << i);
-+ }
-+ }
-+}
-+
-+static inline void da9030_disable_interrupts(struct da9030 *da9030)
-+{
-+ /* clear pending interruts */
-+ (void)i2c_smbus_read_byte_data(da9030->client, EVENT_A);
-+ (void)i2c_smbus_read_byte_data(da9030->client, EVENT_B);
-+ (void)i2c_smbus_read_byte_data(da9030->client, EVENT_C);
-+
-+ /* disable interrupts */
-+ i2c_smbus_write_byte_data(da9030->client, IRQ_MASK_A, 0xff);
-+ i2c_smbus_write_byte_data(da9030->client, IRQ_MASK_B, 0xff);
-+ i2c_smbus_write_byte_data(da9030->client, IRQ_MASK_C, 0xff);
-+}
-+
-+static int da9030_probe(struct i2c_client *client)
-+{
-+ int ret;
-+ struct da9030 *da9030;
-+
-+ if (the_da9030) {
-+ dev_dbg(&client->dev, "only one %s for now\n",
-+ DRIVER_NAME);
-+ return -ENODEV;
-+ }
-+
-+ ret = i2c_smbus_read_byte_data(client, CHIP_ID);
-+
-+ dev_info(&client->dev, "initialized chip revision %x\n", ret);
-+
-+ da9030 = kzalloc(sizeof(struct da9030), GFP_KERNEL);
-+ if (da9030 == NULL) {
-+ dev_err(&client->dev, "insufficient memory\n");
-+ return -ENOMEM;
-+ }
-+ the_da9030 = da9030;
-+ da9030->client = client;
-+
-+ mutex_init(&the_da9030->lock);
-+
-+ da9030_disable_interrupts(da9030);
-+ INIT_WORK(&da9030->event_work, da9030_irq_worker);
-+
-+ ret = request_irq(client->irq, da9030_irq,
-+ IRQF_DISABLED, DRIVER_NAME, da9030);
-+
-+ if (ret) {
-+ kfree(da9030);
-+ dev_err(&client->dev,
-+ "failed to allocate irq %d\n",
-+ client->irq);
-+ return ret;
-+ }
-+
-+ i2c_set_clientdata(client, da9030);
-+
-+ da9030->debug_file = da9030_create_debugfs(da9030);
-+
-+ return 0;
-+}
-+
-+/* static int da9030_detach_adapter(struct i2c_adapter *a) */
-+static int da9030_remove(struct i2c_client *client)
-+{
-+ struct da9030 *da9030 = i2c_get_clientdata(client);
-+
-+ da9030_remove_debugfs(da9030);
-+
-+ free_irq(da9030->client->irq, da9030);
-+ kfree(da9030);
-+ i2c_set_clientdata(client, NULL);
-+ the_da9030 = NULL;
-+
-+ return 0;
-+}
-+
-+static struct i2c_driver da9030_driver = {
-+ .driver = {
-+ .name = "da9030",
-+ .owner = THIS_MODULE,
-+ },
-+
-+ .probe = da9030_probe,
-+ .remove = da9030_remove,
-+};
-+
-+static int da9030_init(void)
-+{
-+ i2c_add_driver(&da9030_driver);
-+ return 0;
-+}
-+
-+static void da9030_exit(void)
-+{
-+ i2c_del_driver(&da9030_driver);
-+}
-+
-+/* NOTE: this MUST be initialized before the other parts of the system
-+ * that rely on it ... but after the i2c bus on which this relies.
-+ * That is, much earlier than on PC-type systems, which don't often use
-+ * I2C as a core system bus.
-+ */
-+subsys_initcall(da9030_init);
-+module_exit(da9030_exit);
-+
-+MODULE_DESCRIPTION("DA9030 power manager driver");
-+MODULE_AUTHOR("Mike Rapoport, Compulab");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/i2c/chips/da9030.h b/drivers/i2c/chips/da9030.h
-new file mode 100644
-index 0000000..4163156
---- /dev/null
-+++ b/drivers/i2c/chips/da9030.h
-@@ -0,0 +1,282 @@
-+/* DA9030 Register definintions */
-+
-+#define CHIP_ID 0x00
-+
-+#define EVENT_A 0x01
-+#define EVENT_A_CHIOVER (1 << 7)
-+#define EVENT_A_VBAT_MON_TXON (1 << 6)
-+#define EVENT_A_VBAT_MON (1 << 5)
-+#define EVENT_A_TBAT (1 << 4)
-+#define EVENT_A_CHDET (1 << 3)
-+#define EVENT_A_EXTON (1 << 2)
-+#define EVENT_A_PWREN1 (1 << 1)
-+#define EVENT_A_ONKEY_N (1 << 0)
-+
-+#define EVENT_B 0x02
-+#define EVENT_B_WDOG_INT (1 << 7)
-+#define EVENT_B_SRP_DETECT (1 << 6)
-+#define EVENT_B_SESSION_VALID (1 << 5)
-+#define EVENT_B_VBUS_VALID_4_0 (1 << 4)
-+#define EVENT_B_VBUS_VALID_4_4 (1 << 3)
-+#define EVENT_B_ADC_READY (1 << 2)
-+#define EVENT_B_CCTO (1 << 1)
-+#define EVENT_B_TCTO (1 << 0)
-+
-+#define EVENT_C 0x03
-+#define EVENT_C_ADC_IN5 (1 << 7)
-+#define EVENT_C_ADC_IN4 (1 << 6)
-+#define EVENT_C_BUCK2 (1 << 5)
-+#define EVENT_C_LDO19 (1 << 4)
-+#define EVENT_C_LDO18 (1 << 3)
-+#define EVENT_C_LDO17 (1 << 2)
-+#define EVENT_C_LDO16 (1 << 1)
-+#define EVENT_C_LDO15 (1 << 0)
-+
-+#define STATUS 0x04
-+#define STATUS_MCLK_DETECT (1 << 7)
-+#define STATUS_VBAT_MON_TXON (1 << 6)
-+#define STATUS_VBAT_MON (1 << 5)
-+#define STATUS_TBAT (1 << 4)
-+#define STATUS_CHDET (1 << 3)
-+#define STATUS_EXTON (1 << 2)
-+#define STATUS_PWREN1 (1 << 1)
-+#define STATUS_ONKEY_N (1 << 0)
-+
-+#define IRQ_MASK_A 0x05
-+#define IRQ_MASK_A_CHIOVER (1 << 7)
-+#define IRQ_MASK_A_VBAT_MON_TXON (1 << 6)
-+#define IRQ_MASK_A_VBAT_MON (1 << 5)
-+#define IRQ_MASK_A_TBAT (1 << 4)
-+#define IRQ_MASK_A_CHDET (1 << 3)
-+#define IRQ_MASK_A_EXTON (1 << 2)
-+#define IRQ_MASK_A_PWREN1 (1 << 1)
-+#define IRQ_MASK_A_ONKEY_N (1 << 0)
-+
-+#define IRQ_MASK_B 0x06
-+#define IRQ_MASK_B_WDOG_INT (1 << 7)
-+#define IRQ_MASK_B_SRP_DETECT (1 << 6)
-+#define IRQ_MASK_B_SESSION_VALID (1 << 5)
-+#define IRQ_MASK_B_VBUS_VALID_4_0 (1 << 4)
-+#define IRQ_MASK_B_VBUS_VALID_4_4 (1 << 3)
-+#define IRQ_MASK_B_ADC_READY (1 << 2)
-+#define IRQ_MASK_B_CCTO (1 << 1)
-+#define IRQ_MASK_B_TCTO (1 << 0)
-+
-+#define IRQ_MASK_C 0x07
-+#define IRQ_MASK_C_ADC_IN5 (1 << 7)
-+#define IRQ_MASK_C_ADC_IN4 (1 << 6)
-+#define IRQ_MASK_C_BUCK2 (1 << 5)
-+#define IRQ_MASK_C_LDO19 (1 << 4)
-+#define IRQ_MASK_C_LDO18 (1 << 3)
-+#define IRQ_MASK_C_LDO17 (1 << 2)
-+#define IRQ_MASK_C_LDO16 (1 << 1)
-+#define IRQ_MASK_C_LDO15 (1 << 0)
-+
-+#define SYS_CTRL_A 0x08
-+#define SYS_CONTROL_A_SLEEP_N_PIN_ENABLE 0x1
-+#define SYS_CONTROL_A_SHUT_DOWN (1<<1)
-+#define SYS_CONTROL_A_HWRES_ENABLE (1<<2)
-+#define SYS_CONTROL_A_WDOG_ACTION (1<<3)
-+#define SYS_CONTROL_A_WATCHDOG (1<<7)
-+
-+#define SYS_CONTROL_B 0x09
-+#define SYS_CLTR_B_SLEEP_13MHZ_EN (1 << 4)
-+#define SYS_CLTR_B_AUTO_CLK_SWITCH (1 << 3)
-+
-+#define FAULT_LOG 0x0a
-+#define FAULT_LOG_OVER_TEMP (1 << 7)
-+#define FAULT_LOG_VBAT_OVER (1 << 4)
-+
-+#define LDO_10_11 0x10
-+#define LDO_10_11_LDO10_3V (0xc)
-+#define LDO_10_11_LDO11_3V2 (0xe << 4)
-+
-+#define LDO_15 0x11
-+#define LDO_14_16 0x12
-+#define LDO_18_19 0x13
-+#define LDO_18_19_LDO18_3V2 (0xe)
-+
-+#define LDO_17_SIMCP0 0x14
-+#define LDO_17_SIMCP0_LDO17_3V 0x0F
-+
-+#define BUCK_2_DVC1 0x15
-+#define BUCK_2_GO (1 << 7)
-+#define BUCK_2_SLEEP (1 << 6)
-+#define BUCK_2_TRIM_1V5 (0x1a)
-+
-+#define BUCK_2_DVC2 0x16
-+
-+#define REG_CONTROL_1_17 0x17
-+#define RC1_LDO17_EN (1 << 7)
-+#define RC1_LDO16_EN (1 << 6)
-+#define RC1_LDO15_EN (1 << 5)
-+#define RC1_LDO14_EN (1 << 4)
-+#define RC1_LDO13_EN (1 << 3)
-+#define RC1_LDO11_EN (1 << 2)
-+#define RC1_LDO10_EN (1 << 1)
-+#define RC1_BUCK2_EN (1 << 0)
-+
-+#define REG_CONTROL_2_18 0x18
-+#define RC2_SIMCP_EN (1 << 6)
-+#define RC2_LDO19_EN (1 << 1)
-+#define RC2_LDO18_EN (1 << 0)
-+
-+#define REG_CONTROL_3_
-+
-+#define USBPUMP 0x19
-+#define USB_PUMP_EN_USBVEP (1 << 7)
-+#define USB_PUMP_EN_USBVE (1 << 6)
-+#define USB_PUMP_SPR_DETECT (1 << 5)
-+#define USB_PUMP_SESSION_VALID (1 << 4)
-+#define USB_PUMP_VBUS_VALID_4_0 (1 << 3)
-+#define USB_PUMP_VBUS_VALID_4_4 (1 << 2)
-+#define USB_PUMP_USBVEP (1 << 1)
-+#define USB_PUMP_USBVE (1 << 0)
-+
-+#define SLEEP_CONTROL 0x1a
-+#define APP_SLEEP_CTL_PWR_EN (1 << 7)
-+#define APP_SLEEP_CTL_SYS_EN (1 << 6)
-+#define APP_SLEEP_CTL_BYPASS_LDO19 (1 << 2)
-+#define APP_SLEEP_CTL_BYPASS_LDO18 (1 << 1)
-+#define APP_SLEEP_CTL_BYPASS_LDO17 (1 << 0)
-+
-+#define STARTUP_CONTROL 0x1b
-+#define STARTUP_CTL_LDO11_PWR_SYS (1 << 3)
-+#define STARTUP_CTL_LDO10_PWR_SYS (1 << 2)
-+#define STARTUP_CTL_LDO11_START (1 << 1)
-+#define STARTUP_CTL_LDO10_START (1 << 0)
-+
-+#define LED_1_CONTROL 0x20
-+#define LED_2_CONTROL 0x21
-+#define LED_3_CONTROL 0x22
-+#define LED_4_CONTROL 0x23
-+#define LEDPC_CONTROL 0x24
-+#define LED_ENABLE (1 << 7)
-+
-+#define WLED_CONTROL 0x25
-+#define WLED_CP_ENABLE (1 << 6)
-+#define WLED_ISET_10 (3)
-+
-+#define MISC_CONTROLA 0x26
-+#define MISC_CONTROLB 0x27
-+#define MISCB_SESSION_VALID_ENABLE (1 << 3)
-+#define MISCB_USB_INT_RISING (1 << 2)
-+#define MISCB_I2C_ADDRESS (1 << 1)
-+#define MISCB_STARTUP_SEQUENCE (1 << 0)
-+
-+#define CHARGE_CONTROL 0x28
-+#define CHRG_CHARGER_ENABLE (1 << 7)
-+
-+#define CCTR_CONTROL 0x29
-+#define CCTR_SET_8MIN 0x01
-+
-+#define TCTR_CONTROL 0x2a
-+#define CHARGE_PULSE 0x2b
-+
-+#define ADC_MAN_CONTROL 0x30
-+
-+#define ADC_AUTO_CONTROL 0x31
-+#define ADC_IN5_EN (1 << 7)
-+#define ADC_IN4_EN (1 << 6)
-+#define ADC_TBAT_ENABLE (1 << 5)
-+#define ADC_VBAT_IN_TXON (1 << 4)
-+#define ADC_VCH_ENABLE (1 << 3)
-+#define ADC_ICH_ENABLE (1 << 2)
-+#define ADC_VBAT_ENABLE (1 << 1)
-+#define ADC_AUTO_SLEEP_ENABLE (1 << 0)
-+
-+#define VBATMON 0x32
-+#define VBATMONTXON 0x33
-+#define TBATHIGHP 0x34
-+#define TBATHIGHN 0x35
-+#define TBATLOW 0x36
-+#define ADC_IN4_MIN 0x37
-+#define ADC_IN4_MAX 0x38
-+#define ADC_IN5_MIN 0x39
-+#define ADC_IN5_MAX 0x3a
-+
-+#define VBAT_RES 0x41
-+#define VBATMIN_RES 0x42
-+#define VBATMINTXON 0x43
-+#define ICHMAX_RES 0x44
-+#define ICHMIN_RES 0x45
-+#define ICHAVERAGE_RES 0x46
-+#define VCHMAX_RES 0x47
-+#define VCHMIN_RES 0x48
-+#define TBAT_RES 0x49
-+#define ADC_IN4_RES 0x4a
-+#define ADC_IN5_RES 0x4b
-+
-+#define LDO_1 0x90
-+#define LDO_1_UNLOCK (0x5 << 5)
-+#define LDO_1_TRIM_3V (0x12)
-+
-+#define LDO_2_3 0x91
-+#define LDO_2_3_LDO2_3V2 (0xe << 4)
-+#define LDO_2_3_LDO3_3V (0xc)
-+
-+#define LDO_4_5 0x92
-+#define LDO_6_SIMCP 0x93
-+#define LDO_6_SIMCP_LDO6_3V2 (0xe)
-+
-+#define LDO_7_8 0x94
-+#define LDO_9_12 0x95
-+#define BUCK 0x96
-+#define REG_CONTROL_1_97 0x97
-+#define RC3_LDO7_EN (1 << 7)
-+#define RC3_LDO6_EN (1 << 6)
-+#define RC3_LDO5_EN (1 << 5)
-+#define RC3_LDO4_EN (1 << 4)
-+#define RC3_LDO3_EN (1 << 3)
-+#define RC3_LDO2_EN (1 << 2)
-+#define RC3_LDO1_EN (1 << 1)
-+#define RC3_BUCK_EN (1 << 0)
-+
-+#define REG_CONTROL_2_98 0x98
-+#define RC4_SLEEP (1 << 7)
-+#define RC4_SIMCP_ENABLE (1 << 6)
-+#define RC4_LDO14_EN (1 << 5)
-+#define RC4_LDO12_EN (1 << 4)
-+#define RC4_LDO11_EN (1 << 3)
-+#define RC4_LDO10_EN (1 << 2)
-+#define RC4_LDO9_EN (1 << 1)
-+#define RC4_LDO8_EN (1 << 0)
-+
-+#define REG_SLEEP_CONTROL1 0x99
-+#define REG_SLEEP_CONTROL2 0x9a
-+#define REG_SLEEP_CONTROL3 0x9b
-+
-+#define ADC_MAN_CONTROL_1 0xa0
-+#define ADC_DEBOUNCE_VBATMON_TXON (1 << 7)
-+#define ADC_DEBOUNCE_VBATMON (1 << 6)
-+#define ADC_TBATREF_ENABLE (1 << 5)
-+#define ADC_LDO_INT_ENABLE (1 << 4)
-+#define ADC_MAN_CONV (1 << 3)
-+#define ADC_MUX_VBAT (0)
-+
-+#define ADC_AUTO_CONTROL_1 0xa1
-+#define ADC_IN5_EN (1 << 7)
-+#define ADC_IN4_EN (1 << 6)
-+#define ADC_TBAT_ENABLE (1 << 5)
-+#define ADC_VBAT_IN_TXON (1 << 4)
-+#define ADC_VCH_ENABLE (1 << 3)
-+#define ADC_ICH_ENABLE (1 << 2)
-+#define ADC_VBAT_ENABLE (1 << 1)
-+#define ADC_AUTO_SLEEP_ENABLE (1 << 0)
-+
-+#define VBATMON_1 0xa2
-+#define VBATMONTXMON_1 0xa3
-+#define TBATHIGHP_1 0xa4
-+#define TBATHIGHN_1 0xa5
-+#define TBATLOW_1 0xa6
-+#define MAN_RES 0xb0
-+#define VBAT_RES_1 0xb1
-+#define VBATMIN_RES_1 0xb2
-+#define VBATMINTXON_RES 0xb3
-+#define ICHMAX_RES_1 0xb4
-+#define ICHMIN_RES_1 0xb5
-+#define ICHAVERAGE_RES_1 0xb6
-+#define VCHMAX_RES_1 0xb7
-+#define VCHMIN_RES_1 0xb8
-+#define TBAT_RES_1 0xb9
-+#define ADC_IN4_RES_1 0xba
-diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
-index f929fcd..174ea2e 100644
---- a/drivers/input/touchscreen/Kconfig
-+++ b/drivers/input/touchscreen/Kconfig
-@@ -126,6 +126,49 @@ config TOUCHSCREEN_HP600
- To compile this driver as a module, choose M here: the
- module will be called hp680_ts_input.
-
-+config TOUCHSCREEN_WM97XX
-+ tristate "Support for WM97xx AC97 touchscreen controllers"
-+ depends AC97_BUS
-+
-+choice
-+ prompt "WM97xx codec type"
-+ depends TOUCHSCREEN_WM97XX
-+
-+config TOUCHSCREEN_WM9705
-+ bool "WM9705 Touchscreen interface support"
-+ depends on TOUCHSCREEN_WM97XX
-+ help
-+ Say Y here if you have the wm9705 touchscreen.
-+
-+ If unsure, say N.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called wm9705.
-+
-+config TOUCHSCREEN_WM9712
-+ bool "WM9712 Touchscreen interface support"
-+ depends on TOUCHSCREEN_WM97XX
-+ help
-+ Say Y here if you have the wm9712 touchscreen.
-+
-+ If unsure, say N.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called wm9712.
-+
-+config TOUCHSCREEN_WM9713
-+ bool "WM9713 Touchscreen interface support"
-+ depends on TOUCHSCREEN_WM97XX
-+ help
-+ Say Y here if you have the wm9713 touchscreen.
-+
-+ If unsure, say N.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called wm9713.
-+
-+endchoice
-+
- config TOUCHSCREEN_PENMOUNT
- tristate "Penmount serial touchscreen"
- select SERIO
-diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
-index 5de8933..3a059b1 100644
---- a/drivers/input/touchscreen/Makefile
-+++ b/drivers/input/touchscreen/Makefile
-@@ -3,6 +3,7 @@
- #
-
- # Each configuration option enables a list of files.
-+wm97xx-ts-objs := wm97xx-core.o
-
- obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o
- obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o
-@@ -18,3 +19,16 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
- obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
- obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
- obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
-+obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o
-+
-+ifeq ($(CONFIG_TOUCHSCREEN_WM9713),y)
-+wm97xx-ts-objs += wm9713.o
-+endif
-+
-+ifeq ($(CONFIG_TOUCHSCREEN_WM9712),y)
-+wm97xx-ts-objs += wm9712.o
-+endif
-+
-+ifeq ($(CONFIG_TOUCHSCREEN_WM9705),y)
-+wm97xx-ts-objs += wm9705.o
-+endif
-diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
-new file mode 100644
-index 0000000..1dae63d
---- /dev/null
-+++ b/drivers/input/touchscreen/wm9705.c
-@@ -0,0 +1,360 @@
-+/*
-+ * wm9705.c -- Codec driver for Wolfson WM9705 AC97 Codec.
-+ *
-+ * Copyright 2003, 2004, 2005, 2006 Wolfson Microelectronics PLC.
-+ * Author: Liam Girdwood
-+ * liam.girdwood at wolfsonmicro.com or linux at wolfsonmicro.com
-+ * Parts Copyright : Ian Molton <spyro at f2s.com>
-+ * Andrew Zabolotny <zap at homelink.ru>
-+ * Russell King <rmk at arm.linux.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * Revision history
-+ * 6th Sep 2006 Mike Arthur <linux at wolfsonmicro.com>
-+ * Added pre and post sample calls.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+#include <linux/bitops.h>
-+#include <linux/wm97xx.h>
-+
-+#define TS_NAME "wm97xx"
-+#define WM9705_VERSION "0.62"
-+#define DEFAULT_PRESSURE 0xb0c0
-+
-+/*
-+ * Debug
-+ */
-+#if 0
-+#define dbg(format, arg...) printk(KERN_DEBUG TS_NAME ": " format "\n" , ## arg)
-+#else
-+#define dbg(format, arg...)
-+#endif
-+#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg)
-+#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg)
-+#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg)
-+
-+/*
-+ * Module parameters
-+ */
-+
-+/*
-+ * Set current used for pressure measurement.
-+ *
-+ * Set pil = 2 to use 400uA
-+ * pil = 1 to use 200uA and
-+ * pil = 0 to disable pressure measurement.
-+ *
-+ * This is used to increase the range of values returned by the adc
-+ * when measureing touchpanel pressure.
-+ */
-+static int pil = 0;
-+module_param(pil, int, 0);
-+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
-+
-+/*
-+ * Set threshold for pressure measurement.
-+ *
-+ * Pen down pressure below threshold is ignored.
-+ */
-+static int pressure = DEFAULT_PRESSURE & 0xfff;
-+module_param(pressure, int, 0);
-+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
-+
-+/*
-+ * Set adc sample delay.
-+ *
-+ * For accurate touchpanel measurements, some settling time may be
-+ * required between the switch matrix applying a voltage across the
-+ * touchpanel plate and the ADC sampling the signal.
-+ *
-+ * This delay can be set by setting delay = n, where n is the array
-+ * position of the delay in the array delay_table below.
-+ * Long delays > 1ms are supported for completeness, but are not
-+ * recommended.
-+ */
-+static int delay = 4;
-+module_param(delay, int, 0);
-+MODULE_PARM_DESC(delay, "Set adc sample delay.");
-+
-+/*
-+ * Pen detect comparator threshold.
-+ *
-+ * 0 to Vmid in 15 steps, 0 = use zero power comparator with Vmid threshold
-+ * i.e. 1 = Vmid/15 threshold
-+ * 15 = Vmid/1 threshold
-+ *
-+ * Adjust this value if you are having problems with pen detect not
-+ * detecting any down events.
-+ */
-+static int pdd = 8;
-+module_param(pdd, int, 0);
-+MODULE_PARM_DESC(pdd, "Set pen detect comparator threshold");
-+
-+/*
-+ * Set adc mask function.
-+ *
-+ * Sources of glitch noise, such as signals driving an LCD display, may feed
-+ * through to the touch screen plates and affect measurement accuracy. In
-+ * order to minimise this, a signal may be applied to the MASK pin to delay or
-+ * synchronise the sampling.
-+ *
-+ * 0 = No delay or sync
-+ * 1 = High on pin stops conversions
-+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
-+ * 3 = Edge triggered, edge on pin starts conversion after delay param
-+ */
-+static int mask = 0;
-+module_param(mask, int, 0);
-+MODULE_PARM_DESC(mask, "Set adc mask function.");
-+
-+/*
-+ * ADC sample delay times in uS
-+ */
-+static const int delay_table[] = {
-+ 21, // 1 AC97 Link frames
-+ 42, // 2
-+ 84, // 4
-+ 167, // 8
-+ 333, // 16
-+ 667, // 32
-+ 1000, // 48
-+ 1333, // 64
-+ 2000, // 96
-+ 2667, // 128
-+ 3333, // 160
-+ 4000, // 192
-+ 4667, // 224
-+ 5333, // 256
-+ 6000, // 288
-+ 0 // No delay, switch matrix always on
-+};
-+
-+/*
-+ * Delay after issuing a POLL command.
-+ *
-+ * The delay is 3 AC97 link frames + the touchpanel settling delay
-+ */
-+static inline void poll_delay(int d)
-+{
-+ udelay (3 * AC97_LINK_FRAME + delay_table [d]);
-+}
-+
-+/*
-+ * set up the physical settings of the WM9705
-+ */
-+static void init_wm9705_phy(struct wm97xx* wm)
-+{
-+ u16 dig1 = 0, dig2 = WM97XX_RPR;
-+
-+ /*
-+ * mute VIDEO and AUX as they share X and Y touchscreen
-+ * inputs on the WM9705
-+ */
-+ wm97xx_reg_write(wm, AC97_AUX, 0x8000);
-+ wm97xx_reg_write(wm, AC97_VIDEO, 0x8000);
-+
-+ /* touchpanel pressure current*/
-+ if (pil == 2) {
-+ dig2 |= WM9705_PIL;
-+ dbg("setting pressure measurement current to 400uA.");
-+ } else if (pil)
-+ dbg("setting pressure measurement current to 200uA.");
-+ if(!pil)
-+ pressure = 0;
-+
-+ /* polling mode sample settling delay */
-+ if (delay!=4) {
-+ if (delay < 0 || delay > 15) {
-+ dbg("supplied delay out of range.");
-+ delay = 4;
-+ }
-+ }
-+ dig1 &= 0xff0f;
-+ dig1 |= WM97XX_DELAY(delay);
-+ dbg("setting adc sample delay to %d u Secs.", delay_table[delay]);
-+
-+ /* WM9705 pdd */
-+ dig2 |= (pdd & 0x000f);
-+ dbg("setting pdd to Vmid/%d", 1 - (pdd & 0x000f));
-+
-+ /* mask */
-+ dig2 |= ((mask & 0x3) << 4);
-+
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
-+}
-+
-+static int wm9705_digitiser_ioctl(struct wm97xx* wm, int cmd)
-+{
-+ switch(cmd) {
-+ case WM97XX_DIG_START:
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig[2] | WM97XX_PRP_DET_DIG);
-+ wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
-+ break;
-+ case WM97XX_DIG_STOP:
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig[2] & ~WM97XX_PRP_DET_DIG);
-+ break;
-+ case WM97XX_AUX_PREPARE:
-+ memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0);
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG);
-+ break;
-+ case WM97XX_DIG_RESTORE:
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]);
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]);
-+ break;
-+ case WM97XX_PHY_INIT:
-+ init_wm9705_phy(wm);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ return 0;
-+}
-+
-+static inline int is_pden (struct wm97xx* wm)
-+{
-+ return wm->dig[2] & WM9705_PDEN;
-+}
-+
-+/*
-+ * Read a sample from the WM9705 adc in polling mode.
-+ */
-+static int wm9705_poll_sample (struct wm97xx* wm, int adcsel, int *sample)
-+{
-+ int timeout = 5 * delay;
-+
-+ if (!wm->pen_probably_down) {
-+ u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ if (!(data & WM97XX_PEN_DOWN))
-+ return RC_PENUP;
-+ wm->pen_probably_down = 1;
-+ }
-+
-+ /* set up digitiser */
-+ if (adcsel & 0x8000)
-+ adcsel = ((adcsel & 0x7fff) + 3) << 12;
-+
-+ if (wm->mach_ops && wm->mach_ops->pre_sample)
-+ wm->mach_ops->pre_sample(adcsel);
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, adcsel | WM97XX_POLL | WM97XX_DELAY(delay));
-+
-+ /* wait 3 AC97 time slots + delay for conversion */
-+ poll_delay (delay);
-+
-+ /* wait for POLL to go low */
-+ while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL) && timeout) {
-+ udelay(AC97_LINK_FRAME);
-+ timeout--;
-+ }
-+
-+ if (timeout <= 0) {
-+ /* If PDEN is set, we can get a timeout when pen goes up */
-+ if (is_pden(wm))
-+ wm->pen_probably_down = 0;
-+ else
-+ dbg ("adc sample timeout");
-+ return RC_PENUP;
-+ }
-+
-+ *sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ if (wm->mach_ops && wm->mach_ops->post_sample)
-+ wm->mach_ops->post_sample(adcsel);
-+
-+ /* check we have correct sample */
-+ if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) {
-+ dbg ("adc wrong sample, read %x got %x", adcsel,
-+ *sample & WM97XX_ADCSEL_MASK);
-+ return RC_PENUP;
-+ }
-+
-+ if (!(*sample & WM97XX_PEN_DOWN)) {
-+ wm->pen_probably_down = 0;
-+ return RC_PENUP;
-+ }
-+
-+ return RC_VALID;
-+}
-+
-+/*
-+ * Sample the WM9705 touchscreen in polling mode
-+ */
-+static int wm9705_poll_touch(struct wm97xx* wm, struct wm97xx_data *data)
-+{
-+ int rc;
-+
-+ if ((rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X, &data->x)) != RC_VALID)
-+ return rc;
-+ if ((rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y)) != RC_VALID)
-+ return rc;
-+ if (pil) {
-+ if ((rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES, &data->p)) != RC_VALID)
-+ return rc;
-+ } else
-+ data->p = DEFAULT_PRESSURE;
-+
-+ return RC_VALID;
-+}
-+
-+/*
-+ * Enable WM9705 continuous mode, i.e. touch data is streamed across an AC97 slot
-+ */
-+static int wm9705_acc_enable (struct wm97xx* wm, int enable)
-+{
-+ u16 dig1, dig2;
-+ int ret = 0;
-+
-+ dig1 = wm->dig[1];
-+ dig2 = wm->dig[2];
-+
-+ if (enable) {
-+ /* continous mode */
-+ if (wm->mach_ops->acc_startup && (ret = wm->mach_ops->acc_startup(wm)) < 0)
-+ return ret;
-+ dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK |
-+ WM97XX_DELAY_MASK | WM97XX_SLT_MASK);
-+ dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN |
-+ WM97XX_DELAY (delay) |
-+ WM97XX_SLT (wm->acc_slot) |
-+ WM97XX_RATE (wm->acc_rate);
-+ if (pil)
-+ dig1 |= WM97XX_ADCSEL_PRES;
-+ dig2 |= WM9705_PDEN;
-+ } else {
-+ dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN);
-+ dig2 &= ~WM9705_PDEN;
-+ if (wm->mach_ops->acc_shutdown)
-+ wm->mach_ops->acc_shutdown(wm);
-+ }
-+
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
-+ return ret;
-+}
-+
-+struct wm97xx_codec_drv wm97xx_codec = {
-+ .id = WM9705_ID2,
-+ .name = "wm9705",
-+ .poll_sample = wm9705_poll_sample,
-+ .poll_touch = wm9705_poll_touch,
-+ .acc_enable = wm9705_acc_enable,
-+ .digitiser_ioctl = wm9705_digitiser_ioctl,
-+};
-+
-+EXPORT_SYMBOL_GPL(wm97xx_codec);
-+
-+/* Module information */
-+MODULE_AUTHOR("Liam Girdwood, liam.girdwood at wolfsonmicro.com, www.wolfsonmicro.com");
-+MODULE_DESCRIPTION("WM9705 Touch Screen Driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
-new file mode 100644
-index 0000000..99433e9
---- /dev/null
-+++ b/drivers/input/touchscreen/wm9712.c
-@@ -0,0 +1,464 @@
-+/*
-+ * wm9712.c -- Codec driver for Wolfson WM9712 AC97 Codecs.
-+ *
-+ * Copyright 2003, 2004, 2005, 2006 Wolfson Microelectronics PLC.
-+ * Author: Liam Girdwood
-+ * liam.girdwood at wolfsonmicro.com or linux at wolfsonmicro.com
-+ * Parts Copyright : Ian Molton <spyro at f2s.com>
-+ * Andrew Zabolotny <zap at homelink.ru>
-+ * Russell King <rmk at arm.linux.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * Revision history
-+ * 4th Jul 2005 Initial version.
-+ * 6th Sep 2006 Mike Arthur <linux at wolfsonmicro.com>
-+ * Added pre and post sample calls.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+#include <linux/bitops.h>
-+#include <linux/wm97xx.h>
-+
-+#define TS_NAME "wm97xx"
-+#define WM9712_VERSION "0.61"
-+#define DEFAULT_PRESSURE 0xb0c0
-+
-+/*
-+ * Debug
-+ */
-+#if 0
-+#define dbg(format, arg...) printk(KERN_DEBUG TS_NAME ": " format "\n" , ## arg)
-+#else
-+#define dbg(format, arg...)
-+#endif
-+#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg)
-+#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg)
-+#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg)
-+
-+/*
-+ * Module parameters
-+ */
-+
-+/*
-+ * Set internal pull up for pen detect.
-+ *
-+ * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive)
-+ * i.e. pull up resistance = 64k Ohms / rpu.
-+ *
-+ * Adjust this value if you are having problems with pen detect not
-+ * detecting any down event.
-+ */
-+static int rpu = 8;
-+module_param(rpu, int, 0);
-+MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect.");
-+
-+/*
-+ * Set current used for pressure measurement.
-+ *
-+ * Set pil = 2 to use 400uA
-+ * pil = 1 to use 200uA and
-+ * pil = 0 to disable pressure measurement.
-+ *
-+ * This is used to increase the range of values returned by the adc
-+ * when measureing touchpanel pressure.
-+ */
-+static int pil = 0;
-+module_param(pil, int, 0);
-+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
-+
-+/*
-+ * Set threshold for pressure measurement.
-+ *
-+ * Pen down pressure below threshold is ignored.
-+ */
-+static int pressure = DEFAULT_PRESSURE & 0xfff;
-+module_param(pressure, int, 0);
-+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
-+
-+/*
-+ * Set adc sample delay.
-+ *
-+ * For accurate touchpanel measurements, some settling time may be
-+ * required between the switch matrix applying a voltage across the
-+ * touchpanel plate and the ADC sampling the signal.
-+ *
-+ * This delay can be set by setting delay = n, where n is the array
-+ * position of the delay in the array delay_table below.
-+ * Long delays > 1ms are supported for completeness, but are not
-+ * recommended.
-+ */
-+static int delay = 3;
-+module_param(delay, int, 0);
-+MODULE_PARM_DESC(delay, "Set adc sample delay.");
-+
-+/*
-+ * Set five_wire = 1 to use a 5 wire touchscreen.
-+ *
-+ * NOTE: Five wire mode does not allow for readback of pressure.
-+ */
-+static int five_wire;
-+module_param(five_wire, int, 0);
-+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
-+
-+/*
-+ * Set adc mask function.
-+ *
-+ * Sources of glitch noise, such as signals driving an LCD display, may feed
-+ * through to the touch screen plates and affect measurement accuracy. In
-+ * order to minimise this, a signal may be applied to the MASK pin to delay or
-+ * synchronise the sampling.
-+ *
-+ * 0 = No delay or sync
-+ * 1 = High on pin stops conversions
-+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
-+ * 3 = Edge triggered, edge on pin starts conversion after delay param
-+ */
-+static int mask = 0;
-+module_param(mask, int, 0);
-+MODULE_PARM_DESC(mask, "Set adc mask function.");
-+
-+/*
-+ * Coordinate Polling Enable.
-+ *
-+ * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together
-+ * for every poll.
-+ */
-+static int coord = 0;
-+module_param(coord, int, 0);
-+MODULE_PARM_DESC(coord, "Polling coordinate mode");
-+
-+/*
-+ * ADC sample delay times in uS
-+ */
-+static const int delay_table[] = {
-+ 21, // 1 AC97 Link frames
-+ 42, // 2
-+ 84, // 4
-+ 167, // 8
-+ 333, // 16
-+ 667, // 32
-+ 1000, // 48
-+ 1333, // 64
-+ 2000, // 96
-+ 2667, // 128
-+ 3333, // 160
-+ 4000, // 192
-+ 4667, // 224
-+ 5333, // 256
-+ 6000, // 288
-+ 0 // No delay, switch matrix always on
-+};
-+
-+/*
-+ * Delay after issuing a POLL command.
-+ *
-+ * The delay is 3 AC97 link frames + the touchpanel settling delay
-+ */
-+static inline void poll_delay(int d)
-+{
-+ udelay (3 * AC97_LINK_FRAME + delay_table [d]);
-+}
-+
-+/*
-+ * set up the physical settings of the WM9712
-+ */
-+static void init_wm9712_phy(struct wm97xx* wm)
-+{
-+ u16 dig1 = 0;
-+ u16 dig2 = WM97XX_RPR | WM9712_RPU(1);
-+
-+ /* WM9712 rpu */
-+ if (rpu) {
-+ dig2 &= 0xffc0;
-+ dig2 |= WM9712_RPU(rpu);
-+ dbg("setting pen detect pull-up to %d Ohms",64000 / rpu);
-+ }
-+
-+ /* touchpanel pressure current*/
-+ if (pil == 2) {
-+ dig2 |= WM9712_PIL;
-+ dbg("setting pressure measurement current to 400uA.");
-+ } else if (pil)
-+ dbg("setting pressure measurement current to 200uA.");
-+ if(!pil)
-+ pressure = 0;
-+
-+ /* WM9712 five wire */
-+ if (five_wire) {
-+ dig2 |= WM9712_45W;
-+ dbg("setting 5-wire touchscreen mode.");
-+ }
-+
-+ /* polling mode sample settling delay */
-+ if (delay < 0 || delay > 15) {
-+ dbg("supplied delay out of range.");
-+ delay = 4;
-+ }
-+ dig1 &= 0xff0f;
-+ dig1 |= WM97XX_DELAY(delay);
-+ dbg("setting adc sample delay to %d u Secs.", delay_table[delay]);
-+
-+ /* mask */
-+ dig2 |= ((mask & 0x3) << 6);
-+ if (mask) {
-+ u16 reg;
-+ /* Set GPIO4 as Mask Pin*/
-+ reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
-+ wm97xx_reg_write(wm, AC97_MISC_AFE, reg | WM97XX_GPIO_4);
-+ reg = wm97xx_reg_read(wm, AC97_GPIO_CFG);
-+ wm97xx_reg_write(wm, AC97_GPIO_CFG, reg | WM97XX_GPIO_4);
-+ }
-+
-+ /* wait - coord mode */
-+ if(coord)
-+ dig2 |= WM9712_WAIT;
-+
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
-+}
-+
-+static int wm9712_digitiser_ioctl(struct wm97xx* wm, int cmd)
-+{
-+ u16 dig2 = wm->dig[2];
-+
-+ switch(cmd) {
-+ case WM97XX_DIG_START:
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2 | WM97XX_PRP_DET_DIG);
-+ wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
-+ break;
-+ case WM97XX_DIG_STOP:
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2 & ~WM97XX_PRP_DET_DIG);
-+ break;
-+ case WM97XX_AUX_PREPARE:
-+ memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0);
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG);
-+ break;
-+ case WM97XX_DIG_RESTORE:
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]);
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]);
-+ break;
-+ case WM97XX_PHY_INIT:
-+ init_wm9712_phy(wm);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ return 0;
-+}
-+
-+static inline int is_pden (struct wm97xx* wm)
-+{
-+ return wm->dig[2] & WM9712_PDEN;
-+}
-+
-+/*
-+ * Read a sample from the WM9712 adc in polling mode.
-+ */
-+static int wm9712_poll_sample (struct wm97xx* wm, int adcsel, int *sample)
-+{
-+ int timeout = 5 * delay;
-+
-+ if (!wm->pen_probably_down) {
-+ u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ if (!(data & WM97XX_PEN_DOWN))
-+ return RC_PENUP;
-+ wm->pen_probably_down = 1;
-+ }
-+
-+ /* set up digitiser */
-+ if (adcsel & 0x8000)
-+ adcsel = ((adcsel & 0x7fff) + 3) << 12;
-+
-+ if (wm->mach_ops && wm->mach_ops->pre_sample)
-+ wm->mach_ops->pre_sample(adcsel);
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, adcsel | WM97XX_POLL | WM97XX_DELAY(delay));
-+
-+ /* wait 3 AC97 time slots + delay for conversion */
-+ poll_delay (delay);
-+
-+ /* wait for POLL to go low */
-+ while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL) && timeout) {
-+ udelay(AC97_LINK_FRAME);
-+ timeout--;
-+ }
-+
-+ if (timeout <= 0) {
-+ /* If PDEN is set, we can get a timeout when pen goes up */
-+ if (is_pden(wm))
-+ wm->pen_probably_down = 0;
-+ else
-+ dbg ("adc sample timeout");
-+ return RC_PENUP;
-+ }
-+
-+ *sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ if (wm->mach_ops && wm->mach_ops->post_sample)
-+ wm->mach_ops->post_sample(adcsel);
-+
-+ /* check we have correct sample */
-+ if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) {
-+ dbg ("adc wrong sample, read %x got %x", adcsel,
-+ *sample & WM97XX_ADCSEL_MASK);
-+ return RC_PENUP;
-+ }
-+
-+ if (!(*sample & WM97XX_PEN_DOWN)) {
-+ wm->pen_probably_down = 0;
-+ return RC_PENUP;
-+ }
-+
-+ return RC_VALID;
-+}
-+
-+/*
-+ * Read a coord from the WM9712 adc in polling mode.
-+ */
-+static int wm9712_poll_coord (struct wm97xx* wm, struct wm97xx_data *data)
-+{
-+ int timeout = 5 * delay;
-+
-+ if (!wm->pen_probably_down) {
-+ u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ if (!(data & WM97XX_PEN_DOWN))
-+ return RC_PENUP;
-+ wm->pen_probably_down = 1;
-+ }
-+
-+ /* set up digitiser */
-+ if (wm->mach_ops && wm->mach_ops->pre_sample)
-+ wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
-+
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1,
-+ WM97XX_COO | WM97XX_POLL | WM97XX_DELAY(delay));
-+
-+ /* wait 3 AC97 time slots + delay for conversion and read x */
-+ poll_delay(delay);
-+ data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ /* wait for POLL to go low */
-+ while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL) && timeout) {
-+ udelay(AC97_LINK_FRAME);
-+ timeout--;
-+ }
-+
-+ if (timeout <= 0) {
-+ /* If PDEN is set, we can get a timeout when pen goes up */
-+ if (is_pden(wm))
-+ wm->pen_probably_down = 0;
-+ else
-+ dbg ("adc sample timeout");
-+ return RC_PENUP;
-+ }
-+
-+ /* read back y data */
-+ data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ if (pil)
-+ data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ else
-+ data->p = DEFAULT_PRESSURE;
-+
-+ if (wm->mach_ops && wm->mach_ops->post_sample)
-+ wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
-+
-+ /* check we have correct sample */
-+ if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y))
-+ goto err;
-+ if(pil && !(data->p & WM97XX_ADCSEL_PRES))
-+ goto err;
-+
-+ if (!(data->x & WM97XX_PEN_DOWN)) {
-+ wm->pen_probably_down = 0;
-+ return RC_PENUP;
-+ }
-+ return RC_VALID;
-+err:
-+ return RC_PENUP;
-+}
-+
-+/*
-+ * Sample the WM9712 touchscreen in polling mode
-+ */
-+static int wm9712_poll_touch(struct wm97xx* wm, struct wm97xx_data *data)
-+{
-+ int rc;
-+
-+ if(coord) {
-+ if((rc = wm9712_poll_coord(wm, data)) != RC_VALID)
-+ return rc;
-+ } else {
-+ if ((rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X, &data->x)) != RC_VALID)
-+ return rc;
-+
-+ if ((rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y)) != RC_VALID)
-+ return rc;
-+
-+ if (pil && !five_wire) {
-+ if ((rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES, &data->p)) != RC_VALID)
-+ return rc;
-+ } else
-+ data->p = DEFAULT_PRESSURE;
-+ }
-+ return RC_VALID;
-+}
-+
-+/*
-+ * Enable WM9712 continuous mode, i.e. touch data is streamed across an AC97 slot
-+ */
-+static int wm9712_acc_enable (struct wm97xx* wm, int enable)
-+{
-+ u16 dig1, dig2;
-+ int ret = 0;
-+
-+ dig1 = wm->dig[1];
-+ dig2 = wm->dig[2];
-+
-+ if (enable) {
-+ /* continous mode */
-+ if (wm->mach_ops->acc_startup && (ret = wm->mach_ops->acc_startup(wm)) < 0)
-+ return ret;
-+ dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK |
-+ WM97XX_DELAY_MASK | WM97XX_SLT_MASK);
-+ dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN |
-+ WM97XX_DELAY (delay) |
-+ WM97XX_SLT (wm->acc_slot) |
-+ WM97XX_RATE (wm->acc_rate);
-+ if (pil)
-+ dig1 |= WM97XX_ADCSEL_PRES;
-+ dig2 |= WM9712_PDEN;
-+ } else {
-+ dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN);
-+ dig2 &= ~WM9712_PDEN;
-+ if (wm->mach_ops->acc_shutdown)
-+ wm->mach_ops->acc_shutdown(wm);
-+ }
-+
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
-+ wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
-+ return 0;
-+}
-+
-+struct wm97xx_codec_drv wm97xx_codec = {
-+ .id = WM9712_ID2,
-+ .name = "wm9712",
-+ .poll_sample = wm9712_poll_sample,
-+ .poll_touch = wm9712_poll_touch,
-+ .acc_enable = wm9712_acc_enable,
-+ .digitiser_ioctl = wm9712_digitiser_ioctl,
-+};
-+
-+EXPORT_SYMBOL_GPL(wm97xx_codec);
-+
-+/* Module information */
-+MODULE_AUTHOR("Liam Girdwood, liam.girdwood at wolfsonmicro.com, www.wolfsonmicro.com");
-+MODULE_DESCRIPTION("WM9712 Touch Screen Driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
-new file mode 100644
-index 0000000..42f5f30
---- /dev/null
-+++ b/drivers/input/touchscreen/wm9713.c
-@@ -0,0 +1,461 @@
-+/*
-+ * wm9713.c -- Codec touch driver for Wolfson WM9713 AC97 Codec.
-+ *
-+ * Copyright 2003, 2004, 2005, 2006 Wolfson Microelectronics PLC.
-+ * Author: Liam Girdwood
-+ * liam.girdwood at wolfsonmicro.com or linux at wolfsonmicro.com
-+ * Parts Copyright : Ian Molton <spyro at f2s.com>
-+ * Andrew Zabolotny <zap at homelink.ru>
-+ * Russell King <rmk at arm.linux.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * Revision history
-+ * 6th Sep 2006 Mike Arthur <linux at wolfsonmicro.com>
-+ * Added pre and post sample calls.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+#include <linux/bitops.h>
-+#include <linux/wm97xx.h>
-+
-+#define TS_NAME "wm97xx"
-+#define WM9713_VERSION "0.53"
-+#define DEFAULT_PRESSURE 0xb0c0
-+
-+/*
-+ * Debug
-+ */
-+#if 0
-+#define dbg(format, arg...) printk(KERN_DEBUG TS_NAME ": " format "\n" , ## arg)
-+#else
-+#define dbg(format, arg...)
-+#endif
-+#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg)
-+#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg)
-+#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg)
-+
-+/*
-+ * Module parameters
-+ */
-+
-+/*
-+ * Set internal pull up for pen detect.
-+ *
-+ * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive)
-+ * i.e. pull up resistance = 64k Ohms / rpu.
-+ *
-+ * Adjust this value if you are having problems with pen detect not
-+ * detecting any down event.
-+ */
-+static int rpu = 8;
-+module_param(rpu, int, 0);
-+MODULE_PARM_DESC(rpu, "Set internal pull up resitor for pen detect.");
-+
-+/*
-+ * Set current used for pressure measurement.
-+ *
-+ * Set pil = 2 to use 400uA
-+ * pil = 1 to use 200uA and
-+ * pil = 0 to disable pressure measurement.
-+ *
-+ * This is used to increase the range of values returned by the adc
-+ * when measureing touchpanel pressure.
-+ */
-+static int pil = 0;
-+module_param(pil, int, 0);
-+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
-+
-+/*
-+ * Set threshold for pressure measurement.
-+ *
-+ * Pen down pressure below threshold is ignored.
-+ */
-+static int pressure = DEFAULT_PRESSURE & 0xfff;
-+module_param(pressure, int, 0);
-+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
-+
-+/*
-+ * Set adc sample delay.
-+ *
-+ * For accurate touchpanel measurements, some settling time may be
-+ * required between the switch matrix applying a voltage across the
-+ * touchpanel plate and the ADC sampling the signal.
-+ *
-+ * This delay can be set by setting delay = n, where n is the array
-+ * position of the delay in the array delay_table below.
-+ * Long delays > 1ms are supported for completeness, but are not
-+ * recommended.
-+ */
-+static int delay = 4;
-+module_param(delay, int, 0);
-+MODULE_PARM_DESC(delay, "Set adc sample delay.");
-+
-+/*
-+ * Set adc mask function.
-+ *
-+ * Sources of glitch noise, such as signals driving an LCD display, may feed
-+ * through to the touch screen plates and affect measurement accuracy. In
-+ * order to minimise this, a signal may be applied to the MASK pin to delay or
-+ * synchronise the sampling.
-+ *
-+ * 0 = No delay or sync
-+ * 1 = High on pin stops conversions
-+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
-+ * 3 = Edge triggered, edge on pin starts conversion after delay param
-+ */
-+static int mask = 0;
-+module_param(mask, int, 0);
-+MODULE_PARM_DESC(mask, "Set adc mask function.");
-+
-+/*
-+ * Coordinate Polling Enable.
-+ *
-+ * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together
-+ * for every poll.
-+ */
-+static int coord = 0;
-+module_param(coord, int, 0);
-+MODULE_PARM_DESC(coord, "Polling coordinate mode");
-+
-+/*
-+ * ADC sample delay times in uS
-+ */
-+static const int delay_table[] = {
-+ 21, // 1 AC97 Link frames
-+ 42, // 2
-+ 84, // 4
-+ 167, // 8
-+ 333, // 16
-+ 667, // 32
-+ 1000, // 48
-+ 1333, // 64
-+ 2000, // 96
-+ 2667, // 128
-+ 3333, // 160
-+ 4000, // 192
-+ 4667, // 224
-+ 5333, // 256
-+ 6000, // 288
-+ 0 // No delay, switch matrix always on
-+};
-+
-+/*
-+ * Delay after issuing a POLL command.
-+ *
-+ * The delay is 3 AC97 link frames + the touchpanel settling delay
-+ */
-+static inline void poll_delay(int d)
-+{
-+ udelay (3 * AC97_LINK_FRAME + delay_table [d]);
-+}
-+
-+/*
-+ * set up the physical settings of the WM9713
-+ */
-+static void init_wm9713_phy(struct wm97xx* wm)
-+{
-+ u16 dig1 = 0, dig2, dig3;
-+
-+ /* default values */
-+ dig2 = WM97XX_DELAY(4) | WM97XX_SLT(5);
-+ dig3= WM9712_RPU(1);
-+
-+ /* rpu */
-+ if (rpu) {
-+ dig3 &= 0xffc0;
-+ dig3 |= WM9712_RPU(rpu);
-+ info("setting pen detect pull-up to %d Ohms",64000 / rpu);
-+ }
-+
-+ /* touchpanel pressure */
-+ if (pil == 2) {
-+ dig3 |= WM9712_PIL;
-+ info("setting pressure measurement current to 400uA.");
-+ } else if (pil)
-+ info ("setting pressure measurement current to 200uA.");
-+ if(!pil)
-+ pressure = 0;
-+
-+ /* sample settling delay */
-+ if (delay < 0 || delay > 15) {
-+ info ("supplied delay out of range.");
-+ delay = 4;
-+ info("setting adc sample delay to %d u Secs.", delay_table[delay]);
-+ }
-+ dig2 &= 0xff0f;
-+ dig2 |= WM97XX_DELAY(delay);
-+
-+ /* mask */
-+ dig3 |= ((mask & 0x3) << 4);
-+ if(coord)
-+ dig3 |= WM9713_WAIT;
-+
-+ wm->misc = wm97xx_reg_read(wm, 0x5a);
-+
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3);
-+ wm97xx_reg_write(wm, AC97_GPIO_STICKY, 0x0);
-+}
-+
-+static int wm9713_digitiser_ioctl(struct wm97xx* wm, int cmd)
-+{
-+ u16 val = 0;
-+
-+ switch(cmd){
-+ case WM97XX_DIG_START:
-+ val = wm97xx_reg_read(wm, AC97_EXTENDED_MID);
-+ wm97xx_reg_write(wm, AC97_EXTENDED_MID, val & 0x7fff);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] | WM97XX_PRP_DET_DIG);
-+ wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
-+ break;
-+ case WM97XX_DIG_STOP:
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] & ~WM97XX_PRP_DET_DIG);
-+ val = wm97xx_reg_read(wm, AC97_EXTENDED_MID);
-+ wm97xx_reg_write(wm, AC97_EXTENDED_MID, val | 0x8000);
-+ break;
-+ case WM97XX_AUX_PREPARE:
-+ memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG1, 0);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG2, 0);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG3, WM97XX_PRP_DET_DIG);
-+ break;
-+ case WM97XX_DIG_RESTORE:
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig_save[0]);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig_save[1]);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig_save[2]);
-+ break;
-+ case WM97XX_PHY_INIT:
-+ init_wm9713_phy(wm);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ return 0;
-+}
-+
-+static inline int is_pden (struct wm97xx* wm)
-+{
-+ return wm->dig[2] & WM9713_PDEN;
-+}
-+
-+/*
-+ * Read a sample from the WM9713 adc in polling mode.
-+ */
-+static int wm9713_poll_sample (struct wm97xx* wm, int adcsel, int *sample)
-+{
-+ u16 dig1;
-+ int timeout = 5 * delay;
-+
-+ if (!wm->pen_probably_down) {
-+ u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ if (!(data & WM97XX_PEN_DOWN))
-+ return RC_PENUP;
-+ wm->pen_probably_down = 1;
-+ }
-+
-+ /* set up digitiser */
-+ if (adcsel & 0x8000)
-+ adcsel = 1 << ((adcsel & 0x7fff) + 3);
-+
-+ dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1);
-+ dig1 &= ~WM9713_ADCSEL_MASK;
-+
-+ if (wm->mach_ops && wm->mach_ops->pre_sample)
-+ wm->mach_ops->pre_sample(adcsel);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | adcsel |WM9713_POLL);
-+
-+ /* wait 3 AC97 time slots + delay for conversion */
-+ poll_delay(delay);
-+
-+ /* wait for POLL to go low */
-+ while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL) && timeout) {
-+ udelay(AC97_LINK_FRAME);
-+ timeout--;
-+ }
-+
-+ if (timeout <= 0) {
-+ /* If PDEN is set, we can get a timeout when pen goes up */
-+ if (is_pden(wm))
-+ wm->pen_probably_down = 0;
-+ else
-+ dbg ("adc sample timeout");
-+ return RC_PENUP;
-+ }
-+
-+ *sample =wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ if (wm->mach_ops && wm->mach_ops->post_sample)
-+ wm->mach_ops->post_sample(adcsel);
-+
-+ /* check we have correct sample */
-+ if ((*sample & WM97XX_ADCSRC_MASK) != ffs(adcsel >> 1) << 12) {
-+ dbg ("adc wrong sample, read %x got %x", adcsel,
-+ *sample & WM97XX_ADCSRC_MASK);
-+ return RC_PENUP;
-+ }
-+
-+ if (!(*sample & WM97XX_PEN_DOWN)) {
-+ wm->pen_probably_down = 0;
-+ return RC_PENUP;
-+ }
-+
-+ return RC_VALID;
-+}
-+
-+/*
-+ * Read a coordinate from the WM9713 adc in polling mode.
-+ */
-+static int wm9713_poll_coord (struct wm97xx* wm, struct wm97xx_data *data)
-+{
-+ u16 dig1;
-+ int timeout = 5 * delay;
-+
-+ if (!wm->pen_probably_down) {
-+ u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ if (!(data & WM97XX_PEN_DOWN))
-+ return RC_PENUP;
-+ wm->pen_probably_down = 1;
-+ }
-+
-+ /* set up digitiser */
-+ dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1);
-+ dig1 &= ~WM9713_ADCSEL_MASK;
-+ if(pil)
-+ dig1 |= WM97XX_ADCSEL_PRES;
-+
-+ if (wm->mach_ops && wm->mach_ops->pre_sample)
-+ wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | WM9713_POLL | WM9713_COO);
-+
-+ /* wait 3 AC97 time slots + delay for conversion */
-+ poll_delay(delay);
-+ data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ /* wait for POLL to go low */
-+ while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL) && timeout) {
-+ udelay(AC97_LINK_FRAME);
-+ timeout--;
-+ }
-+
-+ if (timeout <= 0) {
-+ /* If PDEN is set, we can get a timeout when pen goes up */
-+ if (is_pden(wm))
-+ wm->pen_probably_down = 0;
-+ else
-+ dbg ("adc sample timeout");
-+ return RC_PENUP;
-+ }
-+
-+ /* read back data */
-+ data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ if (pil)
-+ data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
-+ else
-+ data->p = DEFAULT_PRESSURE;
-+
-+ if (wm->mach_ops && wm->mach_ops->post_sample)
-+ wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
-+
-+ /* check we have correct sample */
-+ if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y))
-+ goto err;
-+ if(pil && !(data->p & WM97XX_ADCSEL_PRES))
-+ goto err;
-+
-+ if (!(data->x & WM97XX_PEN_DOWN)) {
-+ wm->pen_probably_down = 0;
-+ return RC_PENUP;
-+ }
-+ return RC_VALID;
-+err:
-+ return RC_PENUP;
-+}
-+
-+/*
-+ * Sample the WM9713 touchscreen in polling mode
-+ */
-+static int wm9713_poll_touch(struct wm97xx* wm, struct wm97xx_data *data)
-+{
-+ int rc;
-+
-+ if(coord) {
-+ if((rc = wm9713_poll_coord(wm, data)) != RC_VALID)
-+ return rc;
-+ } else {
-+ if ((rc = wm9713_poll_sample(wm, WM9713_ADCSEL_X, &data->x)) != RC_VALID)
-+ return rc;
-+ if ((rc = wm9713_poll_sample(wm, WM9713_ADCSEL_Y, &data->y)) != RC_VALID)
-+ return rc;
-+ if (pil) {
-+ if ((rc = wm9713_poll_sample(wm, WM9713_ADCSEL_PRES, &data->p)) != RC_VALID)
-+ return rc;
-+ } else
-+ data->p = DEFAULT_PRESSURE;
-+ }
-+ return RC_VALID;
-+}
-+
-+/*
-+ * Enable WM9713 continuous mode, i.e. touch data is streamed across an AC97 slot
-+ */
-+static int wm9713_acc_enable (struct wm97xx* wm, int enable)
-+{
-+ u16 dig1, dig2, dig3;
-+ int ret = 0;
-+
-+ dig1 = wm->dig[0];
-+ dig2 = wm->dig[1];
-+ dig3 = wm->dig[2];
-+
-+ if (enable) {
-+ /* continous mode */
-+ if (wm->mach_ops->acc_startup &&
-+ (ret = wm->mach_ops->acc_startup(wm)) < 0)
-+ return ret;
-+
-+ dig1 &= ~WM9713_ADCSEL_MASK;
-+ dig1 |= WM9713_CTC | WM9713_COO | WM9713_ADCSEL_X | WM9713_ADCSEL_Y;
-+ if (pil)
-+ dig1 |= WM9713_ADCSEL_PRES;
-+ dig2 &= ~(WM97XX_DELAY_MASK | WM97XX_SLT_MASK | WM97XX_CM_RATE_MASK);
-+ dig2 |= WM97XX_SLEN | WM97XX_DELAY (delay) |
-+ WM97XX_SLT (wm->acc_slot) | WM97XX_RATE (wm->acc_rate);
-+ dig3 |= WM9713_PDEN;
-+ } else {
-+ dig1 &= ~(WM9713_CTC | WM9713_COO);
-+ dig2 &= ~WM97XX_SLEN;
-+ dig3 &= ~WM9713_PDEN;
-+ if (wm->mach_ops->acc_shutdown)
-+ wm->mach_ops->acc_shutdown(wm);
-+ }
-+
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3);
-+ return ret;
-+}
-+
-+struct wm97xx_codec_drv wm97xx_codec = {
-+ .id = WM9713_ID2,
-+ .name = "wm9713",
-+ .poll_sample = wm9713_poll_sample,
-+ .poll_touch = wm9713_poll_touch,
-+ .acc_enable = wm9713_acc_enable,
-+ .digitiser_ioctl = wm9713_digitiser_ioctl,
-+};
-+
-+EXPORT_SYMBOL_GPL(wm97xx_codec);
-+
-+/* Module information */
-+MODULE_AUTHOR("Liam Girdwood, liam.girdwood at wolfsonmicro.com, www.wolfsonmicro.com");
-+MODULE_DESCRIPTION("WM9713 Touch Screen Driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
-new file mode 100644
-index 0000000..87179d2
---- /dev/null
-+++ b/drivers/input/touchscreen/wm97xx-core.c
-@@ -0,0 +1,859 @@
-+/*
-+ * wm97xx-core.c -- Touch screen driver core for Wolfson WM9705, WM9712
-+ * and WM9713 AC97 Codecs.
-+ *
-+ * Copyright 2003, 2004, 2005, 2006 Wolfson Microelectronics PLC.
-+ * Author: Liam Girdwood
-+ * liam.girdwood at wolfsonmicro.com or linux at wolfsonmicro.com
-+ * Parts Copyright : Ian Molton <spyro at f2s.com>
-+ * Andrew Zabolotny <zap at homelink.ru>
-+ * Russell King <rmk at arm.linux.org.uk>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * Notes:
-+ *
-+ * Features:
-+ * - supports WM9705, WM9712, WM9713
-+ * - polling mode
-+ * - continuous mode (arch-dependent)
-+ * - adjustable rpu/dpp settings
-+ * - adjustable pressure current
-+ * - adjustable sample settle delay
-+ * - 4 and 5 wire touchscreens (5 wire is WM9712 only)
-+ * - pen down detection
-+ * - battery monitor
-+ * - sample AUX adc's
-+ * - power management
-+ * - codec GPIO
-+ * - codec event notification
-+ * Todo
-+ * - Support for async sampling control for noisy LCD's.
-+ *
-+ * Revision history
-+ * 7th May 2003 Initial version.
-+ * 6th June 2003 Added non module support and AC97 registration.
-+ * 18th June 2003 Added AUX adc sampling.
-+ * 23rd June 2003 Did some minimal reformatting, fixed a couple of
-+ * codec_mutexing bugs and noted a race to fix.
-+ * 24th June 2003 Added power management and fixed race condition.
-+ * 10th July 2003 Changed to a misc device.
-+ * 31st July 2003 Moved TS_EVENT and TS_CAL to wm97xx.h
-+ * 8th Aug 2003 Added option for read() calling wm97xx_sample_touch()
-+ * because some ac97_read/ac_97_write call schedule()
-+ * 7th Nov 2003 Added Input touch event interface, stanley.cai at intel.com
-+ * 13th Nov 2003 Removed h3600 touch interface, added interrupt based
-+ * pen down notification and implemented continous mode
-+ * on XScale arch.
-+ * 16th Nov 2003 Ian Molton <spyro at f2s.com>
-+ * Modified so that it suits the new 2.6 driver model.
-+ * 25th Jan 2004 Andrew Zabolotny <zap at homelink.ru>
-+ * Implemented IRQ-driven pen down detection, implemented
-+ * the private API meant to be exposed to platform-specific
-+ * drivers, reorganized the driver so that it supports
-+ * an arbitrary number of devices.
-+ * 1st Feb 2004 Moved continuous mode handling to a separate
-+ * architecture-dependent file. For now only PXA
-+ * built-in AC97 controller is supported (pxa-ac97-wm97xx.c).
-+ * 11th Feb 2004 Reduced CPU usage by keeping a cached copy of both
-+ * digitizer registers instead of reading them every time.
-+ * A reorganization of the whole code for better
-+ * error handling.
-+ * 17th Apr 2004 Added BMON support.
-+ * 17th Nov 2004 Added codec GPIO, codec event handling (real and virtual
-+ * GPIOs) and 2.6 power management.
-+ * 29th Nov 2004 Added WM9713 support.
-+ * 4th Jul 2005 Moved codec specific code out to seperate files.
-+ * 6th Sep 2006 Mike Arthur <linux at wolfsonmicro.com>
-+ * Added bus interface.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/string.h>
-+#include <linux/proc_fs.h>
-+#include <linux/pm.h>
-+#include <linux/interrupt.h>
-+#include <linux/bitops.h>
-+#include <linux/workqueue.h>
-+#include <linux/device.h>
-+#include <linux/freezer.h>
-+#include <linux/wm97xx.h>
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+
-+#include <asm/arch/irqs.h>
-+
-+#define TS_NAME "wm97xx"
-+#define WM_CORE_VERSION "0.64"
-+#define DEFAULT_PRESSURE 0xb0c0
-+
-+
-+/*
-+ * Touchscreen absolute values
-+ *
-+ * These parameters are used to help the input layer discard out of
-+ * range readings and reduce jitter etc.
-+ *
-+ * o min, max:- indicate the min and max values your touch screen returns
-+ * o fuzz:- use a higher number to reduce jitter
-+ *
-+ * The default values correspond to Mainstone II in QVGA mode
-+ *
-+ * Please read
-+ * Documentation/input/input-programming.txt for more details.
-+ */
-+
-+static int abs_x[3] = {350,3900,5};
-+module_param_array(abs_x, int, NULL, 0);
-+MODULE_PARM_DESC(abs_x, "Touchscreen absolute X min, max, fuzz");
-+
-+static int abs_y[3] = {320,3750,40};
-+module_param_array(abs_y, int, NULL, 0);
-+MODULE_PARM_DESC(abs_y, "Touchscreen absolute Y min, max, fuzz");
-+
-+static int abs_p[3] = {0,150,4};
-+module_param_array(abs_p, int, NULL, 0);
-+MODULE_PARM_DESC(abs_p, "Touchscreen absolute Pressure min, max, fuzz");
-+
-+/*
-+ * Debug
-+ */
-+#if 0
-+#define dbg(format, arg...) printk(KERN_DEBUG TS_NAME ": " format "\n" , ## arg)
-+#else
-+#define dbg(format, arg...)
-+#endif
-+#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg)
-+#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg)
-+#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg)
-+
-+/*
-+ * wm97xx IO access, all IO locking done by AC97 layer
-+ */
-+int wm97xx_reg_read(struct wm97xx *wm, u16 reg)
-+{
-+ if (wm->ac97)
-+ return wm->ac97->bus->ops->read(wm->ac97, reg);
-+ else
-+ return -1;
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_reg_read);
-+
-+void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val)
-+{
-+ /* cache digitiser registers */
-+ if(reg >= AC97_WM9713_DIG1 && reg <= AC97_WM9713_DIG3)
-+ wm->dig[(reg - AC97_WM9713_DIG1) >> 1] = val;
-+
-+ /* cache gpio regs */
-+ if(reg >= AC97_GPIO_CFG && reg <= AC97_MISC_AFE)
-+ wm->gpio[(reg - AC97_GPIO_CFG) >> 1] = val;
-+
-+ /* wm9713 irq reg */
-+ if(reg == 0x5a)
-+ wm->misc = val;
-+
-+ if (wm->ac97)
-+ wm->ac97->bus->ops->write(wm->ac97, reg, val);
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_reg_write);
-+
-+/**
-+ * wm97xx_read_aux_adc - Read the aux adc.
-+ * @wm: wm97xx device.
-+ * @adcsel: codec ADC to be read
-+ *
-+ * Reads the selected AUX ADC.
-+ */
-+
-+int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel)
-+{
-+ int power_adc = 0, auxval;
-+ u16 power = 0;
-+
-+ /* get codec */
-+ mutex_lock(&wm->codec_mutex);
-+
-+ /* When the touchscreen is not in use, we may have to power up the AUX ADC
-+ * before we can use sample the AUX inputs->
-+ */
-+ if (wm->id == WM9713_ID2 &&
-+ (power = wm97xx_reg_read(wm, AC97_EXTENDED_MID)) & 0x8000) {
-+ power_adc = 1;
-+ wm97xx_reg_write(wm, AC97_EXTENDED_MID, power & 0x7fff);
-+ }
-+
-+ /* Prepare the codec for AUX reading */
-+ wm->codec->digitiser_ioctl(wm, WM97XX_AUX_PREPARE);
-+
-+ /* Turn polling mode on to read AUX ADC */
-+ wm->pen_probably_down = 1;
-+ wm->codec->poll_sample(wm, adcsel, &auxval);
-+
-+ if (power_adc)
-+ wm97xx_reg_write(wm, AC97_EXTENDED_MID, power | 0x8000);
-+
-+ wm->codec->digitiser_ioctl(wm, WM97XX_DIG_RESTORE);
-+
-+ wm->pen_probably_down = 0;
-+
-+ mutex_unlock(&wm->codec_mutex);
-+ return auxval & 0xfff;
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_read_aux_adc);
-+
-+/**
-+ * wm97xx_get_gpio - Get the status of a codec GPIO.
-+ * @wm: wm97xx device.
-+ * @gpio: gpio
-+ *
-+ * Get the status of a codec GPIO pin
-+ */
-+
-+wm97xx_gpio_status_t wm97xx_get_gpio(struct wm97xx *wm, u32 gpio)
-+{
-+ u16 status;
-+ wm97xx_gpio_status_t ret;
-+
-+ mutex_lock(&wm->codec_mutex);
-+ status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-+
-+ if (status & gpio)
-+ ret = WM97XX_GPIO_HIGH;
-+ else
-+ ret = WM97XX_GPIO_LOW;
-+
-+ mutex_unlock(&wm->codec_mutex);
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_get_gpio);
-+
-+/**
-+ * wm97xx_set_gpio - Set the status of a codec GPIO.
-+ * @wm: wm97xx device.
-+ * @gpio: gpio
-+ *
-+ *
-+ * Set the status of a codec GPIO pin
-+ */
-+
-+void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
-+ wm97xx_gpio_status_t status)
-+{
-+ u16 reg;
-+
-+ mutex_lock(&wm->codec_mutex);
-+ reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-+
-+ if (status & WM97XX_GPIO_HIGH)
-+ reg |= gpio;
-+ else
-+ reg &= ~gpio;
-+
-+ if (wm->id == WM9712_ID2)
-+ wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg << 1);
-+ else
-+ wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg);
-+ mutex_unlock(&wm->codec_mutex);
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_set_gpio);
-+
-+/*
-+ * Codec GPIO pin configuration, this set's pin direction, polarity,
-+ * stickyness and wake up.
-+ */
-+void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, wm97xx_gpio_dir_t dir,
-+ wm97xx_gpio_pol_t pol, wm97xx_gpio_sticky_t sticky,
-+ wm97xx_gpio_wake_t wake)
-+{
-+ u16 reg;
-+
-+ mutex_lock(&wm->codec_mutex);
-+ reg = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
-+
-+ if (pol == WM97XX_GPIO_POL_HIGH)
-+ reg |= gpio;
-+ else
-+ reg &= ~gpio;
-+
-+ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, reg);
-+ reg = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
-+
-+ if (sticky == WM97XX_GPIO_STICKY)
-+ reg |= gpio;
-+ else
-+ reg &= ~gpio;
-+
-+ wm97xx_reg_write(wm, AC97_GPIO_STICKY, reg);
-+ reg = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
-+
-+ if (wake == WM97XX_GPIO_WAKE)
-+ reg |= gpio;
-+ else
-+ reg &= ~gpio;
-+
-+ wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, reg);
-+ reg = wm97xx_reg_read(wm, AC97_GPIO_CFG);
-+
-+ if (dir == WM97XX_GPIO_IN)
-+ reg |= gpio;
-+ else
-+ reg &= ~gpio;
-+
-+ wm97xx_reg_write(wm, AC97_GPIO_CFG, reg);
-+ mutex_unlock(&wm->codec_mutex);
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_config_gpio);
-+
-+/*
-+ * Handle a pen down interrupt.
-+ */
-+static void wm97xx_pen_irq_worker(struct work_struct *w)
-+{
-+/* struct wm97xx *wm = (struct wm97xx *) ptr; */
-+ struct wm97xx *wm = container_of(w, struct wm97xx, pen_event_work);
-+
-+ /* do we need to enable the touch panel reader */
-+ if (wm->id == WM9705_ID2) {
-+ if (wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD) & WM97XX_PEN_DOWN)
-+ wm->pen_is_down = 1;
-+ else
-+ wm->pen_is_down = 0;
-+ wake_up_interruptible(&wm->pen_irq_wait);
-+ } else {
-+ u16 status, pol;
-+ mutex_lock(&wm->codec_mutex);
-+ status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-+ pol = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
-+
-+ if (WM97XX_GPIO_13 & pol & status) {
-+ wm->pen_is_down = 1;
-+ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol & ~WM97XX_GPIO_13);
-+ } else {
-+ wm->pen_is_down = 0;
-+ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol | WM97XX_GPIO_13);
-+ }
-+
-+ if (wm->id == WM9712_ID2)
-+ wm97xx_reg_write(wm, AC97_GPIO_STATUS, (status & ~WM97XX_GPIO_13) << 1);
-+ else
-+ wm97xx_reg_write(wm, AC97_GPIO_STATUS, status & ~WM97XX_GPIO_13);
-+ mutex_unlock(&wm->codec_mutex);
-+ wake_up_interruptible(&wm->pen_irq_wait);
-+ }
-+
-+ if (!wm->pen_is_down && wm->mach_ops && wm->mach_ops->acc_enabled)
-+ wm->mach_ops->acc_pen_up(wm);
-+ enable_irq(wm->pen_irq);
-+}
-+
-+/*
-+ * Codec PENDOWN irq handler
-+ *
-+ * We have to disable the codec interrupt in the handler because it can
-+ * take upto 1ms to clear the interrupt source. The interrupt is then enabled
-+ * again in the slow handler when the source has been cleared.
-+ */
-+static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
-+{
-+ struct wm97xx *wm = (struct wm97xx *) dev_id;
-+ disable_irq(wm->pen_irq);
-+ queue_work(wm->pen_irq_workq, &wm->pen_event_work);
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * initialise pen IRQ handler and workqueue
-+ */
-+static int wm97xx_init_pen_irq(struct wm97xx *wm)
-+{
-+ u16 reg;
-+
-+ INIT_WORK(&wm->pen_event_work, wm97xx_pen_irq_worker/* , wm */);
-+ if ((wm->pen_irq_workq =
-+ create_singlethread_workqueue("kwm97pen")) == NULL) {
-+ err("could not create pen irq work queue");
-+ wm->pen_irq = 0;
-+ return -EINVAL;
-+ }
-+
-+
-+ wm->pen_irq = IRQ_GPIO(90);
-+ if (request_irq (wm->pen_irq, wm97xx_pen_interrupt, SA_SHIRQ, "wm97xx-pen", wm)) {
-+ err("could not register codec pen down interrupt, will poll for pen down");
-+ destroy_workqueue(wm->pen_irq_workq);
-+ wm->pen_irq = 0;
-+ return -EINVAL;
-+ }
-+
-+ /* enable PEN down on wm9712/13 */
-+ if (wm->id != WM9705_ID2) {
-+ reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
-+ wm97xx_reg_write(wm, AC97_MISC_AFE, reg & 0xfffb);
-+ reg = wm97xx_reg_read(wm, 0x5a);
-+ wm97xx_reg_write(wm, 0x5a, reg & ~0x0001);
-+ }
-+
-+ return 0;
-+}
-+
-+/* Private struct for communication between struct wm97xx_tshread
-+ * and wm97xx_read_samples */
-+struct ts_state {
-+ int sleep_time;
-+ int min_sleep_time;
-+};
-+
-+static int wm97xx_read_samples(struct wm97xx *wm, struct ts_state *state)
-+{
-+ struct wm97xx_data data;
-+ int rc;
-+
-+ mutex_lock(&wm->codec_mutex);
-+
-+ if (wm->mach_ops && wm->mach_ops->acc_enabled)
-+ rc = wm->mach_ops->acc_pen_down(wm);
-+ else
-+ rc = wm->codec->poll_touch(wm, &data);
-+
-+ if (rc & RC_PENUP) {
-+ if (wm->pen_is_down) {
-+ wm->pen_is_down = 0;
-+ dbg("pen up");
-+ input_report_abs(wm->input_dev, ABS_PRESSURE, 0);
-+ input_sync(wm->input_dev);
-+ } else if (!(rc & RC_AGAIN)) {
-+ /* We need high frequency updates only while pen is down,
-+ * the user never will be able to touch screen faster than
-+ * a few times per second... On the other hand, when the
-+ * user is actively working with the touchscreen we don't
-+ * want to lose the quick response. So we will slowly
-+ * increase sleep time after the pen is up and quicky
-+ * restore it to ~one task switch when pen is down again.
-+ */
-+ if (state->sleep_time < HZ / 10)
-+ state->sleep_time++;
-+ }
-+
-+ } else if (rc & RC_VALID) {
-+ dbg("pen down: x=%x:%d, y=%x:%d, pressure=%x:%d\n",
-+ data.x >> 12, data.x & 0xfff, data.y >> 12,
-+ data.y & 0xfff, data.p >> 12, data.p & 0xfff);
-+ input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff);
-+ input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff);
-+ input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff);
-+ input_sync(wm->input_dev);
-+ wm->pen_is_down = 1;
-+ state->sleep_time = state->min_sleep_time;
-+ } else if (rc & RC_PENDOWN) {
-+ dbg("pen down");
-+ wm->pen_is_down = 1;
-+ state->sleep_time = state->min_sleep_time;
-+ }
-+
-+ mutex_unlock(&wm->codec_mutex);
-+ return rc;
-+}
-+
-+/*
-+* The touchscreen sample reader thread.
-+*/
-+static int wm97xx_ts_read(void *data)
-+{
-+ int rc;
-+ struct ts_state state;
-+ struct wm97xx *wm = (struct wm97xx *) data;
-+
-+ /* set up thread context */
-+ wm->ts_task = current;
-+ daemonize("kwm97xxts");
-+
-+ if (wm->codec == NULL) {
-+ wm->ts_task = NULL;
-+ printk(KERN_ERR "codec is NULL, bailing\n");
-+ }
-+
-+ complete(&wm->ts_init);
-+ wm->pen_is_down = 0;
-+ state.min_sleep_time = HZ >= 100 ? HZ / 100 : 1;
-+ if (state.min_sleep_time < 1)
-+ state.min_sleep_time = 1;
-+ state.sleep_time = state.min_sleep_time;
-+
-+ /* touch reader loop */
-+ while (wm->ts_task) {
-+ do {
-+ try_to_freeze();
-+ rc = wm97xx_read_samples(wm, &state);
-+ } while (rc & RC_AGAIN);
-+ if (!wm->pen_is_down && wm->pen_irq) {
-+ /* Nice, we don't have to poll for pen down event */
-+ wait_event_interruptible(wm->pen_irq_wait, wm->pen_is_down);
-+ } else {
-+ set_task_state(current, TASK_INTERRUPTIBLE);
-+ schedule_timeout(state.sleep_time);
-+ }
-+ }
-+ complete_and_exit(&wm->ts_exit, 0);
-+}
-+
-+/**
-+ * wm97xx_ts_input_open - Open the touch screen input device.
-+ * @idev: Input device to be opened.
-+ *
-+ * Called by the input sub system to open a wm97xx touchscreen device.
-+ * Starts the touchscreen thread and touch digitiser.
-+ */
-+static int wm97xx_ts_input_open(struct input_dev *idev)
-+{
-+ int ret = 0;
-+ struct wm97xx *wm = (struct wm97xx *) idev->private;
-+
-+ mutex_lock(&wm->codec_mutex);
-+ /* first time opened ? */
-+ if (wm->ts_use_count++ == 0) {
-+ /* start touchscreen thread */
-+ init_completion(&wm->ts_init);
-+ init_completion(&wm->ts_exit);
-+ ret = kernel_thread(wm97xx_ts_read, wm, CLONE_KERNEL);
-+
-+ if (ret >= 0) {
-+ wait_for_completion(&wm->ts_init);
-+ if (wm->ts_task == NULL)
-+ ret = -EINVAL;
-+ } else {
-+ mutex_unlock(&wm->codec_mutex);
-+ return ret;
-+ }
-+
-+ /* start digitiser */
-+ if (wm->mach_ops && wm->mach_ops->acc_enabled)
-+ wm->codec->acc_enable(wm, 1);
-+ wm->codec->digitiser_ioctl(wm, WM97XX_DIG_START);
-+
-+ /* init pen down/up irq handling */
-+ if (wm->pen_irq) {
-+ wm97xx_init_pen_irq(wm);
-+
-+ if (wm->pen_irq == 0) {
-+ /* we failed to get an irq for pen down events,
-+ * so we resort to polling. kickstart the reader */
-+ wm->pen_is_down = 1;
-+ wake_up_interruptible(&wm->pen_irq_wait);
-+ }
-+ }
-+ }
-+
-+ mutex_unlock(&wm->codec_mutex);
-+ return 0;
-+}
-+
-+/**
-+ * wm97xx_ts_input_close - Close the touch screen input device.
-+ * @idev: Input device to be closed.
-+ *
-+ * Called by the input sub system to close a wm97xx touchscreen device.
-+ * Kills the touchscreen thread and stops the touch digitiser.
-+ */
-+
-+static void wm97xx_ts_input_close(struct input_dev *idev)
-+{
-+ struct wm97xx *wm = (struct wm97xx *) idev->private;
-+
-+ mutex_lock(&wm->codec_mutex);
-+ if (--wm->ts_use_count == 0) {
-+ /* destroy workqueues and free irqs */
-+ if (wm->pen_irq) {
-+ free_irq(wm->pen_irq, wm);
-+ destroy_workqueue(wm->pen_irq_workq);
-+ }
-+
-+ /* kill thread */
-+ if (wm->ts_task) {
-+ wm->ts_task = NULL;
-+ wm->pen_is_down = 1;
-+ mutex_unlock(&wm->codec_mutex);
-+ wake_up_interruptible(&wm->pen_irq_wait);
-+ wait_for_completion(&wm->ts_exit);
-+ wm->pen_is_down = 0;
-+ mutex_lock(&wm->codec_mutex);
-+ }
-+
-+ /* stop digitiser */
-+ wm->codec->digitiser_ioctl(wm, WM97XX_DIG_STOP);
-+ if (wm->mach_ops && wm->mach_ops->acc_enabled)
-+ wm->codec->acc_enable(wm, 0);
-+ }
-+ mutex_unlock(&wm->codec_mutex);
-+}
-+
-+/*
-+ * Bus interface to allow for client drivers codec access
-+ * e.g. battery monitor
-+ */
-+static int wm97xx_bus_match(struct device *dev, struct device_driver *drv)
-+{
-+ return !(strcmp(dev->bus_id,drv->name));
-+}
-+
-+/*
-+ * The AC97 audio driver will do all the Codec suspend and resume
-+ * tasks. This is just for anything machine specific or extra.
-+ */
-+static int wm97xx_bus_suspend(struct device *dev, pm_message_t state)
-+{
-+ int ret = 0;
-+
-+ if (dev->driver && dev->driver->suspend)
-+ ret = dev->driver->suspend(dev, state);
-+
-+ return ret;
-+}
-+
-+static int wm97xx_bus_resume(struct device *dev)
-+{
-+ int ret = 0;
-+
-+ if (dev->driver && dev->driver->resume)
-+ ret = dev->driver->resume(dev);
-+
-+ return ret;
-+}
-+
-+struct bus_type wm97xx_bus_type = {
-+ .name = "wm97xx",
-+ .match = wm97xx_bus_match,
-+ .suspend = wm97xx_bus_suspend,
-+ .resume = wm97xx_bus_resume,
-+};
-+EXPORT_SYMBOL_GPL(wm97xx_bus_type);
-+
-+static void wm97xx_release(struct device *dev)
-+{
-+ kfree(dev);
-+}
-+
-+static int wm97xx_probe(struct device *dev)
-+{
-+ struct wm97xx* wm;
-+ int ret = 0, id = 0;
-+
-+ if (!(wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL)))
-+ return -ENOMEM;
-+ mutex_init(&wm->codec_mutex);
-+
-+ init_waitqueue_head(&wm->pen_irq_wait);
-+ wm->dev = dev;
-+ dev->driver_data = wm;
-+ wm->ac97 = to_ac97_t(dev);
-+
-+ /* check that we have a supported codec */
-+ if ((id = wm97xx_reg_read(wm, AC97_VENDOR_ID1)) != WM97XX_ID1) {
-+ err("could not find a wm97xx, found a %x instead\n", id);
-+ kfree(wm);
-+ return -ENODEV;
-+ }
-+
-+ wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2);
-+ if(wm->id != wm97xx_codec.id) {
-+ err("could not find a the selected codec, please build for wm97%2x", wm->id & 0xff);
-+ kfree(wm);
-+ return -ENODEV;
-+ }
-+
-+ if((wm->input_dev = input_allocate_device()) == NULL) {
-+ kfree(wm);
-+ return -ENOMEM;
-+ }
-+
-+ /* set up touch configuration */
-+ info("detected a wm97%2x codec", wm->id & 0xff);
-+ wm->input_dev->name = "wm97xx touchscreen";
-+ wm->input_dev->open = wm97xx_ts_input_open;
-+ wm->input_dev->close = wm97xx_ts_input_close;
-+ set_bit(EV_ABS, wm->input_dev->evbit);
-+ set_bit(ABS_X, wm->input_dev->absbit);
-+ set_bit(ABS_Y, wm->input_dev->absbit);
-+ set_bit(ABS_PRESSURE, wm->input_dev->absbit);
-+ wm->input_dev->absmax[ABS_X] = abs_x[1];
-+ wm->input_dev->absmax[ABS_Y] = abs_y[1];
-+ wm->input_dev->absmax[ABS_PRESSURE] = abs_p[1];
-+ wm->input_dev->absmin[ABS_X] = abs_x[0];
-+ wm->input_dev->absmin[ABS_Y] = abs_y[0];
-+ wm->input_dev->absmin[ABS_PRESSURE] = abs_p[0];
-+ wm->input_dev->absfuzz[ABS_X] = abs_x[2];
-+ wm->input_dev->absfuzz[ABS_Y] = abs_y[2];
-+ wm->input_dev->absfuzz[ABS_PRESSURE] = abs_p[2];
-+ wm->input_dev->private = wm;
-+ wm->codec = &wm97xx_codec;
-+ if((ret = input_register_device(wm->input_dev)) < 0) {
-+ kfree(wm);
-+ return -ENOMEM;
-+ }
-+
-+ /* set up physical characteristics */
-+ wm->codec->digitiser_ioctl(wm, WM97XX_PHY_INIT);
-+
-+ /* load gpio cache */
-+ wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
-+ wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
-+ wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
-+ wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
-+ wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
-+ wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
-+
-+ /* register our battery device */
-+ if (!(wm->battery_dev = kzalloc(sizeof(struct device), GFP_KERNEL))) {
-+ ret = -ENOMEM;
-+ goto batt_err;
-+ }
-+ wm->battery_dev->bus = &wm97xx_bus_type;
-+ strcpy(wm->battery_dev->bus_id,"wm97xx-battery");
-+ wm->battery_dev->driver_data = wm;
-+ wm->battery_dev->parent = dev;
-+ wm->battery_dev->release = wm97xx_release;
-+ if((ret = device_register(wm->battery_dev)) < 0)
-+ goto batt_reg_err;
-+
-+ /* register our extended touch device (for machine specific extensions) */
-+ if (!(wm->touch_dev = kzalloc(sizeof(struct device), GFP_KERNEL))) {
-+ ret = -ENOMEM;
-+ goto touch_err;
-+ }
-+ wm->touch_dev->bus = &wm97xx_bus_type;
-+ strcpy(wm->touch_dev->bus_id,"wm97xx-touchscreen");
-+ wm->touch_dev->driver_data = wm;
-+ wm->touch_dev->parent = dev;
-+ wm->touch_dev->release = wm97xx_release;
-+ if((ret = device_register(wm->touch_dev)) < 0)
-+ goto touch_reg_err;
-+
-+ return ret;
-+
-+touch_reg_err:
-+ kfree(wm->touch_dev);
-+touch_err:
-+ device_unregister(wm->battery_dev);
-+batt_reg_err:
-+ kfree(wm->battery_dev);
-+batt_err:
-+ input_unregister_device(wm->input_dev);
-+ kfree(wm);
-+ return ret;
-+}
-+
-+static int wm97xx_remove(struct device *dev)
-+{
-+ struct wm97xx *wm = dev_get_drvdata(dev);
-+
-+ /* Stop touch reader thread */
-+ if (wm->ts_task) {
-+ wm->ts_task = NULL;
-+ wm->pen_is_down = 1;
-+ wake_up_interruptible(&wm->pen_irq_wait);
-+ wait_for_completion(&wm->ts_exit);
-+ }
-+ device_unregister(wm->battery_dev);
-+ device_unregister(wm->touch_dev);
-+ input_unregister_device(wm->input_dev);
-+
-+ kfree(wm);
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+int wm97xx_resume(struct device* dev)
-+{
-+ struct wm97xx *wm = dev_get_drvdata(dev);
-+
-+ /* restore digitiser and gpio's */
-+ if(wm->id == WM9713_ID2) {
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig[0]);
-+ wm97xx_reg_write(wm, 0x5a, wm->misc);
-+ if(wm->ts_use_count) {
-+ u16 reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) & 0x7fff;
-+ wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
-+ }
-+ }
-+
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig[1]);
-+ wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2]);
-+
-+ wm97xx_reg_write(wm, AC97_GPIO_CFG, wm->gpio[0]);
-+ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, wm->gpio[1]);
-+ wm97xx_reg_write(wm, AC97_GPIO_STICKY, wm->gpio[2]);
-+ wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, wm->gpio[3]);
-+ wm97xx_reg_write(wm, AC97_GPIO_STATUS, wm->gpio[4]);
-+ wm97xx_reg_write(wm, AC97_MISC_AFE, wm->gpio[5]);
-+
-+ return 0;
-+}
-+
-+#else
-+#define wm97xx_resume NULL
-+#endif
-+
-+/*
-+ * Machine specific operations
-+ */
-+int wm97xx_register_mach_ops(struct wm97xx *wm, struct wm97xx_mach_ops *mach_ops)
-+{
-+ mutex_lock(&wm->codec_mutex);
-+ if(wm->mach_ops) {
-+ mutex_unlock(&wm->codec_mutex);
-+ return -EINVAL;
-+ }
-+ wm->mach_ops = mach_ops;
-+ mutex_unlock(&wm->codec_mutex);
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_register_mach_ops);
-+
-+void wm97xx_unregister_mach_ops(struct wm97xx *wm)
-+{
-+ mutex_lock(&wm->codec_mutex);
-+ wm->mach_ops = NULL;
-+ mutex_unlock(&wm->codec_mutex);
-+}
-+EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
-+
-+static struct device_driver wm97xx_driver = {
-+ .name = "ac97",
-+ .bus = &ac97_bus_type,
-+ .owner = THIS_MODULE,
-+ .probe = wm97xx_probe,
-+ .remove = wm97xx_remove,
-+ .resume = wm97xx_resume,
-+};
-+
-+static int __init wm97xx_init(void)
-+{
-+ int ret;
-+
-+ info("version %s liam.girdwood at wolfsonmicro.com", WM_CORE_VERSION);
-+ if((ret = bus_register(&wm97xx_bus_type)) < 0)
-+ return ret;
-+ return driver_register(&wm97xx_driver);
-+}
-+
-+static void __exit wm97xx_exit(void)
-+{
-+ driver_unregister(&wm97xx_driver);
-+ bus_unregister(&wm97xx_bus_type);
-+}
-+
-+module_init(wm97xx_init);
-+module_exit(wm97xx_exit);
-+
-+/* Module information */
-+MODULE_AUTHOR("Liam Girdwood, liam.girdwood at wolfsonmicro.com, www.wolfsonmicro.com");
-+MODULE_DESCRIPTION("WM97xx Core - Touch Screen / AUX ADC / GPIO Driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
-index 4468cb3..01b4828 100644
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -101,6 +101,12 @@ config LEDS_GPIO
- outputs. To be useful the particular board must have LEDs
- and they must be connected to the GPIO lines.
-
-+config LEDS_EM_X270
-+ tristate "LED Support for the CompuLab EM-X270"
-+ depends on LEDS_CLASS && MACH_EM_X270
-+ help
-+ This option enables support for the LEDs on CompuLab EM-X270.
-+
- comment "LED Triggers"
-
- config LEDS_TRIGGERS
-diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
-index f8995c9..6d3941e 100644
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
- obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
- obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
-+obj-$(CONFIG_LEDS_EM_X270) += leds-em-x270.o
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
-diff --git a/drivers/leds/leds-em-x270.c b/drivers/leds/leds-em-x270.c
-new file mode 100644
-index 0000000..485e7da
---- /dev/null
-+++ b/drivers/leds/leds-em-x270.c
-@@ -0,0 +1,99 @@
-+/*
-+ * LED Triggers Core
-+ *
-+ * Copyright 2007 CompuLab, Ltd.
-+ * Author: Mike Rapoport <mike at compulab.co.il>
-+ *
-+ * Based on Corgi leds driver:
-+ * Copyright 2005-2006 Openedhand Ltd.
-+ * Author: Richard Purdie <rpurdie at openedhand.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/da9030.h>
-+
-+static void em_x270_led_orange_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ int on = 1;
-+ int pwm_chop = 0;
-+
-+ pr_info("%s: value = %d\n", __FUNCTION__, value);
-+ if (value == LED_OFF)
-+ on = 0;
-+ else if (value == LED_HALF)
-+ pwm_chop = 4;
-+
-+ da9030_set_led(3, on, 0, 0, pwm_chop);
-+}
-+
-+static struct led_classdev em_x270_orange_led = {
-+ .name = "em_x270:orange",
-+ .default_trigger = "em-x270-battery.0-charging-or-full",
-+ .brightness_set = em_x270_led_orange_set,
-+};
-+
-+#ifdef CONFIG_PM
-+static int em_x270_led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+#ifdef CONFIG_LEDS_TRIGGERS
-+ if (em_x270_orange_led.trigger && strcmp(em_x270_orange_led.trigger->name, "em-x270-battery-charging-or-full"))
-+#endif
-+ led_classdev_suspend(&em_x270_orange_led);
-+ return 0;
-+}
-+
-+static int em_x270_led_resume(struct platform_device *dev)
-+{
-+ led_classdev_resume(&em_x270_orange_led);
-+ return 0;
-+}
-+#endif
-+
-+static int em_x270_led_probe(struct platform_device *pdev)
-+{
-+ return led_classdev_register(&pdev->dev, &em_x270_orange_led);
-+}
-+
-+static int em_x270_led_remove(struct platform_device *pdev)
-+{
-+ led_classdev_unregister(&em_x270_orange_led);
-+ return 0;
-+}
-+
-+static struct platform_driver em_x270_led_driver = {
-+ .probe = em_x270_led_probe,
-+ .remove = em_x270_led_remove,
-+#ifdef CONFIG_PM
-+ .suspend = em_x270_led_suspend,
-+ .resume = em_x270_led_resume,
-+#endif
-+ .driver = {
-+ .name = "em-x270-led",
-+ },
-+};
-+
-+static int __init em_x270_led_init(void)
-+{
-+ return platform_driver_register(&em_x270_led_driver);
-+}
-+
-+static void __exit em_x270_led_exit(void)
-+{
-+ platform_driver_unregister(&em_x270_led_driver);
-+}
-+
-+module_init(em_x270_led_init);
-+module_exit(em_x270_led_exit);
-+
-+MODULE_AUTHOR("Mike Rapoport <mike at compulab.co.il>");
-+MODULE_DESCRIPTION("EX-X270 LED driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
-index 58e561e..7050e71 100644
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -38,7 +38,7 @@
- #define MANUFACTURER_ST 0x0020
- #define MANUFACTURER_TOSHIBA 0x0098
- #define MANUFACTURER_WINBOND 0x00da
--
-+#define CONTINUATION_CODE 0x007f
-
- /* AMD */
- #define AM29DL800BB 0x22C8
-@@ -68,6 +68,10 @@
- #define AT49BV32X 0x00C8
- #define AT49BV32XT 0x00C9
-
-+/* Eon */
-+#define EN29SL800BB 0x226B
-+#define EN29SL800BT 0x22EA
-+
- /* Fujitsu */
- #define MBM29F040C 0x00A4
- #define MBM29LV650UE 0x22D7
-@@ -632,6 +636,40 @@ static const struct amd_flash_info jedec_table[] = {
- ERASEINFO(0x02000,8)
- }
- }, {
-+ .mfr_id = 0x1c,
-+ .dev_id = EN29SL800BT,
-+ .name = "Eon EN29SL800BT",
-+ .uaddr = {
-+ [0] = MTD_UADDR_0x0555_0x02AA, /* x8 */
-+ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
-+ },
-+ .DevSize = SIZE_1MiB,
-+ .CmdSet = P_ID_AMD_STD,
-+ .NumEraseRegions= 4,
-+ .regions = {
-+ ERASEINFO(0x10000, 15),
-+ ERASEINFO(0x08000, 1),
-+ ERASEINFO(0x02000, 2),
-+ ERASEINFO(0x04000, 1),
-+ }
-+ }, {
-+ .mfr_id = 0x1c,
-+ .dev_id = EN29SL800BB,
-+ .name = "Eon EN29SL800BB",
-+ .uaddr = {
-+ [0] = MTD_UADDR_0x0555_0x02AA, /* x8 */
-+ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */
-+ },
-+ .DevSize = SIZE_1MiB,
-+ .CmdSet = P_ID_AMD_STD,
-+ .NumEraseRegions= 4,
-+ .regions = {
-+ ERASEINFO(0x04000, 1),
-+ ERASEINFO(0x02000, 2),
-+ ERASEINFO(0x08000, 1),
-+ ERASEINFO(0x10000, 15),
-+ }
-+ }, {
- .mfr_id = MANUFACTURER_FUJITSU,
- .dev_id = MBM29F040C,
- .name = "Fujitsu MBM29F040C",
-@@ -1769,9 +1807,21 @@ static inline u32 jedec_read_mfr(struct map_info *map, __u32 base,
- {
- map_word result;
- unsigned long mask;
-- u32 ofs = cfi_build_cmd_addr(0, cfi_interleave(cfi), cfi->device_type);
-- mask = (1 << (cfi->device_type * 8)) -1;
-- result = map_read(map, base + ofs);
-+ int bank = 0;
-+
-+ /* According to JEDEC "Standard Manufacturer's Identification Code"
-+ * (http://www.jedec.org/download/search/jep106W.pdf)
-+ * several first banks can contain 0x7f instead of actual ID
-+ */
-+ do {
-+ u32 ofs = cfi_build_cmd_addr(0 + (bank << 8),
-+ cfi_interleave(cfi),
-+ cfi->device_type);
-+ mask = (1 << (cfi->device_type * 8)) -1;
-+ result = map_read(map, base + ofs);
-+ bank++;
-+ } while ((result.x[0] & mask) == CONTINUATION_CODE);
-+
- return result.x[0] & mask;
- }
-
-diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
-index 738aa59..88dbbdf 100644
---- a/drivers/net/dm9000.c
-+++ b/drivers/net/dm9000.c
-@@ -546,6 +546,7 @@ dm9000_probe(struct platform_device *pdev)
-
- if (id_val != DM9000_ID) {
- printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val);
-+ ret = -ENODEV;
- goto release;
- }
-
-diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
-index 58c806e..3a16d9c 100644
---- a/drivers/power/Kconfig
-+++ b/drivers/power/Kconfig
-@@ -49,4 +49,10 @@ config BATTERY_OLPC
- help
- Say Y to enable support for the battery on the OLPC laptop.
-
-+config BATTERY_EM_X270
-+ tristate "EM-X270 battery"
-+ depends on DA9030 && MACH_EM_X270
-+ help
-+ Say Y here to enable support for battery on EM-X270.
-+
- endif # POWER_SUPPLY
-diff --git a/drivers/power/Makefile b/drivers/power/Makefile
-index 6413ded..dc9585e 100644
---- a/drivers/power/Makefile
-+++ b/drivers/power/Makefile
-@@ -20,3 +20,4 @@ obj-$(CONFIG_APM_POWER) += apm_power.o
- obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
- obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
- obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
-+obj-$(CONFIG_BATTERY_EM_X270) += em_x270_battery.o
-diff --git a/drivers/power/em_x270_battery.c b/drivers/power/em_x270_battery.c
-new file mode 100644
-index 0000000..2630c68
---- /dev/null
-+++ b/drivers/power/em_x270_battery.c
-@@ -0,0 +1,579 @@
-+/*
-+ * Power managemnet implementation for EM-X270
-+ *
-+ * Copyright (C) 2007 CompuLab, Ltd.
-+ * Author: Mike Rapoport <mike at compulab.co.il>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#define DEBUG
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/pda_power.h>
-+#include <linux/apm-emulation.h>
-+#include <linux/da9030.h>
-+#include <linux/power_supply.h>
-+#include <linux/pm.h>
-+
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-+
-+#include "../i2c/chips/da9030.h"
-+
-+#define VOLTAGE_MAX_DESIGN 4200000 /* 4.2V in uV */
-+#define VOLTAGE_MIN_DESIGN 3000000 /* 3V in uV */
-+
-+/* #define VCHARGE_MIN_THRESHOLD 72 /\* 4.5V *\/ */
-+
-+#define VCHARGE_MIN_THRESHOLD 60 /* ?.?V */
-+#define VCHARGE_MAX_THRESHOLD 89 /* 5.5V */
-+#define TBAT_LOW_THRESHOLD 197 /* 0oC */
-+#define TBAT_HIGH_THRESHOLD 78 /* 45oC */
-+#define TBAT_RESUME_THRESHOLD 100 /* 35oC */
-+#define VBAT_LOW_THRESHOLD 82 /* 3.498V */
-+#define VBAT_CRIT_THRESHOLD 62 /* 3.291V */
-+
-+struct da9030_charger {
-+ struct device *dev;
-+
-+ struct power_supply bat;
-+ struct da9030_adc_res adc;
-+ struct delayed_work work;
-+
-+ int interval;
-+ int status;
-+ int mA;
-+ int mV;
-+
-+ int is_charging:1;
-+
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debug_file;
-+#endif
-+};
-+
-+static unsigned short tbat_readings[] = {
-+ 300, 244, 200, 178, 163, 152, 144, 137, 131,
-+ 126, 122, 118, 114, 111, 108, 105, 103, 101,
-+ 98, 96, 94, 93, 91, 89, 88, 86, 85,
-+ 83, 82, 81, 79, 78, 77, 76, 75, 74,
-+ 73, 72, 71, 70, 69, 68, 67, 67, 66,
-+ 65, 64, 63, 63, 62, 61, 60, 60, 59,
-+ 58, 58, 57, 57, 56, 55, 55, 54, 53,
-+ 53, 52, 52, 51, 51, 50, 50, 49, 49,
-+ 48, 48, 47, 47, 46, 46, 45, 45, 44,
-+ 44, 43, 43, 42, 42, 41, 41, 41, 40,
-+ 40, 39, 39, 38, 38, 38, 37, 37, 36,
-+ 36, 35, 35, 35, 34, 34, 34, 33, 33,
-+ 32, 32, 32, 31, 31, 30, 30, 30, 29,
-+ 29, 29, 28, 28, 28, 27, 27, 26, 26,
-+ 26, 25, 25, 25, 24, 24, 24, 23, 23,
-+ 23, 22, 22, 21, 21, 21, 20, 20, 20,
-+ 19, 19, 19, 18, 18, 18, 17, 17, 17,
-+ 16, 16, 16, 15, 15, 14, 14, 14, 13,
-+ 13, 13, 12, 12, 12, 11, 11, 11, 10,
-+ 10, 10, 9, 9, 8, 8, 8, 7, 7,
-+ 7, 6, 6, 5, 5, 5, 4, 4, 3,
-+ 3, 3, 2, 2, 1, 1, 1, 0, 0,
-+ -1, -1, -1, -2, -2, -3, -3, -4, -4,
-+ -5, -5, -6, -6, -6, -7, -7, -8, -9,
-+ -9, -10, -10, -11, -11, -12, -12, -13, -14,
-+ -14, -15, -16, -16, -17, -18, -18, -19, -20,
-+ -21, -21, -22, -23, -24, -25, -26, -27, -28,
-+ -30, -31, -32, -34, -35, -37, -39, -41, -44,
-+ -47, -50, -56, -64,
-+};
-+
-+#ifdef CONFIG_DEBUG_FS
-+
-+#define REG2VOLT(x) ((((x) * 2650) >> 8) + 2650)
-+
-+static int debug_show(struct seq_file *s, void *data)
-+{
-+ struct da9030_charger *charger = s->private;
-+
-+ seq_printf(s, "charger is %s\n",
-+ charger->status & CHRG_CHARGER_ENABLE ? "on" : "off");
-+ if (charger->status & CHRG_CHARGER_ENABLE) {
-+ seq_printf(s, "iset = %dmA, vset = %dmV\n",
-+ charger->mA, charger->mV);
-+ }
-+
-+ seq_printf(s, "vbat_res = %d (%dmV)\n",
-+ charger->adc.vbat_res, REG2VOLT(charger->adc.vbat_res));
-+ seq_printf(s, "vbatmin_res = %d (%dmV)\n",
-+ charger->adc.vbatmin_res,
-+ REG2VOLT(charger->adc.vbatmin_res));
-+ seq_printf(s, "vbatmintxon = %d (%dmV)\n",
-+ charger->adc.vbatmintxon,
-+ REG2VOLT(charger->adc.vbatmintxon));
-+ seq_printf(s, "ichmax_res = %d\n", charger->adc.ichmax_res);
-+ seq_printf(s, "ichmin_res = %d\n", charger->adc.ichmin_res);
-+ seq_printf(s, "ichaverage_res = %d\n", charger->adc.ichaverage_res);
-+ seq_printf(s, "vchmax_res = %d (%dmV)\n",
-+ charger->adc.vchmax_res,
-+ REG2VOLT(charger->adc.vchmax_res));
-+ seq_printf(s, "vchmin_res = %d (%dmV)\n",
-+ charger->adc.vchmin_res,
-+ REG2VOLT(charger->adc.vchmin_res));
-+ seq_printf(s, "tbat_res = %d (%doC\n", charger->adc.tbat_res,
-+ tbat_readings[charger->adc.tbat_res]);
-+ seq_printf(s, "adc_in4_res = %d\n", charger->adc.adc_in4_res);
-+ seq_printf(s, "adc_in5_res = %d\n", charger->adc.adc_in5_res);
-+
-+ return 0;
-+}
-+
-+static int debug_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, debug_show, inode->i_private);
-+}
-+
-+static const struct file_operations debug_fops = {
-+ .open = debug_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+static struct dentry* da9030_create_debugfs(struct da9030_charger *charger)
-+{
-+ charger->debug_file = debugfs_create_file("charger", 0666, 0, charger,
-+ &debug_fops);
-+ return charger->debug_file;
-+}
-+
-+static void da9030_remove_debugfs(struct da9030_charger *charger)
-+{
-+ debugfs_remove(charger->debug_file);
-+}
-+#else
-+#define da9030_create_debugfs(x) NULL
-+#define da9030_remove_debugfs(x) do {} while(0)
-+#endif
-+
-+static void da9030_set_charge(struct da9030_charger *charger, int on)
-+{
-+/* int status = da9030_get_status(); */
-+ if (on) {
-+ pr_debug("%s: enabling charger\n", __FUNCTION__);
-+ da9030_set_thresholds(TBAT_HIGH_THRESHOLD,
-+ TBAT_RESUME_THRESHOLD,
-+ TBAT_LOW_THRESHOLD);
-+ da9030_set_charger(1, 1000, 4200);
-+ charger->is_charging = 1;
-+ }
-+ else {
-+ /* disable charger */
-+ pr_debug("%s: disabling charger\n", __FUNCTION__);
-+ da9030_set_charger(0, 0, 0);
-+ charger->is_charging = 0;
-+ }
-+}
-+
-+static void da9030_charging_monitor(struct work_struct *work)
-+{
-+ struct da9030_charger *charger;
-+ int is_on;
-+ unsigned int mA, mV;
-+
-+ charger = container_of(work, struct da9030_charger, work.work);
-+
-+ da9030_get_charger(&is_on, &mA, &mV);
-+ da9030_read_adc(&charger->adc);
-+
-+ charger->status = da9030_get_status();
-+ charger->mA = mA;
-+ charger->mV = mV;
-+
-+ /* we wake or boot with external power on */
-+ if (!is_on && (charger->status & STATUS_CHDET)) {
-+ da9030_set_charge(charger, 1);
-+ return;
-+ }
-+
-+ if (is_on) {
-+/* pr_info("%s: mA = %d, mV = %d\n", __FUNCTION__, mA, mV); */
-+/* pr_info("%s: vchmin_res = %d, vchmax_res = %d\n", */
-+/* __FUNCTION__, charger->adc.vchmin_res, */
-+/* charger->adc.vchmax_res); */
-+/* pr_info("%s: tbat_res = %d\n", */
-+/* __FUNCTION__, charger->adc.tbat_res); */
-+ if (charger->adc.vbat_res > VBAT_LOW_THRESHOLD) {
-+ /* update VBAT threshlods ? */
-+ da9030_set_reg(VBATMON, VBAT_LOW_THRESHOLD);
-+ }
-+ if (charger->adc.vchmax_res > VCHARGE_MAX_THRESHOLD ||
-+ charger->adc.vchmin_res < VCHARGE_MIN_THRESHOLD ||
-+ /* Tempreture readings are negative */
-+ charger->adc.tbat_res < TBAT_HIGH_THRESHOLD ||
-+ charger->adc.tbat_res > TBAT_LOW_THRESHOLD) {
-+ /* disable charger */
-+ da9030_set_charge(charger, 0);
-+ }
-+ }
-+
-+ /* reschedule for the next time */
-+ schedule_delayed_work(&charger->work, charger->interval);
-+}
-+
-+void da9030_battery_release(struct device * dev)
-+{
-+}
-+
-+static void da9030_external_power_changed(struct power_supply *psy)
-+{
-+/* struct da9030_charger *charger; */
-+
-+/* charger = container_of(psy, struct da9030_charger, bat); */
-+/* pr_info("%s:\n", __FUNCTION__); */
-+/* da9030_set_charge(charger); */
-+}
-+
-+struct da9030_battery_thresh {
-+ int voltage;
-+ int percentage;
-+};
-+
-+static struct da9030_battery_thresh vbat_ranges[] = {
-+ { 150, 100},
-+ { 149, 99},
-+ { 148, 98},
-+ { 147, 98},
-+ { 146, 97},
-+ { 145, 96},
-+ { 144, 96},
-+ { 143, 95},
-+ { 142, 94},
-+ { 141, 93},
-+ { 140, 92},
-+ { 139, 91},
-+ { 138, 90},
-+ { 137, 90},
-+ { 136, 89},
-+ { 135, 88},
-+ { 134, 88},
-+ { 133, 87},
-+ { 132, 86},
-+ { 131, 85},
-+ { 130, 83},
-+ { 129, 82},
-+ { 128, 81},
-+ { 127, 81},
-+ { 126, 80},
-+ { 125, 75},
-+ { 124, 74},
-+ { 123, 73},
-+ { 122, 70},
-+ { 121, 66},
-+ { 120, 65},
-+ { 119, 64},
-+ { 118, 64},
-+ { 117, 63},
-+ { 116, 59},
-+ { 115, 58},
-+ { 114, 57},
-+ { 113, 57},
-+ { 112, 56},
-+ { 111, 50},
-+ { 110, 49},
-+ { 109, 49},
-+ { 108, 48},
-+ { 107, 48},
-+ { 106, 33},
-+ { 105, 32},
-+ { 104, 32},
-+ { 103, 32},
-+ { 102, 31},
-+ { 101, 16},
-+ { 100, 15},
-+ { 99, 15},
-+ { 98, 15},
-+ { 97, 10},
-+ { 96, 9},
-+ { 95, 7},
-+ { 94, 3},
-+ { 93, 0},
-+};
-+
-+static enum power_supply_property da9030_bat_props[] = {
-+ POWER_SUPPLY_PROP_STATUS,
-+ POWER_SUPPLY_PROP_HEALTH,
-+ POWER_SUPPLY_PROP_TECHNOLOGY,
-+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
-+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
-+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
-+ POWER_SUPPLY_PROP_CURRENT_AVG,
-+ POWER_SUPPLY_PROP_CAPACITY, /* in percents! */
-+ POWER_SUPPLY_PROP_TEMP,
-+ POWER_SUPPLY_PROP_MANUFACTURER,
-+ POWER_SUPPLY_PROP_MODEL_NAME,
-+};
-+
-+static void da9030_bat_check_status(union power_supply_propval *val)
-+{
-+ int charger_on;
-+ int status = da9030_get_status();
-+
-+ da9030_get_charger(&charger_on, 0, 0);
-+
-+ /* FIXME: below code is very crude approximation of actual
-+ states, we need to take into account voltage and current
-+ measurements to determine actual charger state */
-+ if (status & STATUS_CHDET) {
-+ if (charger_on) {
-+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
-+ }
-+ else {
-+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
-+ }
-+ }
-+ else {
-+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-+ }
-+}
-+
-+static void da9030_bat_check_health(union power_supply_propval *val)
-+{
-+ int fault_log = da9030_get_fault_log();
-+
-+ if (fault_log & FAULT_LOG_OVER_TEMP) {
-+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
-+ }
-+ else if (fault_log & FAULT_LOG_VBAT_OVER) {
-+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
-+ }
-+ else {
-+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
-+ }
-+}
-+
-+static int vbat_interpolate(int reg)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(vbat_ranges); i++ )
-+ if (vbat_ranges[i].voltage == reg) {
-+ pr_debug("%s: voltage = %d, percentage = %d\n",
-+ __FUNCTION__, vbat_ranges[i].voltage,
-+ vbat_ranges[i].percentage);
-+ return vbat_ranges[i].percentage;
-+ }
-+
-+ return 0;
-+}
-+
-+static int da9030_bat_get_property(struct power_supply *psy,
-+ enum power_supply_property psp,
-+ union power_supply_propval *val)
-+{
-+ u32 reg;
-+ struct da9030_charger *charger;
-+ charger = container_of(psy, struct da9030_charger, bat);
-+
-+ switch(psp) {
-+ case POWER_SUPPLY_PROP_STATUS:
-+ da9030_bat_check_status(val);
-+ break;
-+ case POWER_SUPPLY_PROP_HEALTH:
-+ da9030_bat_check_health(val);
-+ break;
-+ case POWER_SUPPLY_PROP_TECHNOLOGY:
-+ val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
-+ break;
-+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-+ val->intval = VOLTAGE_MAX_DESIGN;
-+ break;
-+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
-+ val->intval = VOLTAGE_MIN_DESIGN;
-+ break;
-+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-+ reg = charger->adc.vbat_res;
-+ /* V = (reg / 256) * 2.65 + 2.65 (V) */
-+ val->intval = ((reg * 2650000) >> 8) + 2650000;
-+ break;
-+ case POWER_SUPPLY_PROP_CURRENT_AVG:
-+ reg = charger->adc.ichaverage_res;
-+ val->intval = reg; /* reg */
-+ break;
-+ case POWER_SUPPLY_PROP_CAPACITY:
-+ reg = charger->adc.vbat_res;
-+ val->intval = vbat_interpolate(reg);
-+ break;
-+ case POWER_SUPPLY_PROP_TEMP:
-+ reg = charger->adc.tbat_res;
-+ val->intval = tbat_readings[reg];
-+ break;
-+ case POWER_SUPPLY_PROP_MANUFACTURER:
-+ val->strval = "MaxPower";
-+ pr_debug("%s: MFG = %s\n", __FUNCTION__, val->strval);
-+ break;
-+ case POWER_SUPPLY_PROP_MODEL_NAME:
-+ val->strval = "LP555597P6H-FPS";
-+ pr_debug("%s: MODEL = %s\n", __FUNCTION__, val->strval);
-+ break;
-+ default: break;
-+ }
-+
-+ return 0;
-+}
-+
-+static void da9030_setup_battery(struct power_supply *bat)
-+{
-+ bat->name = "em-x270-battery";
-+ bat->type = POWER_SUPPLY_TYPE_BATTERY;
-+ bat->properties = da9030_bat_props;
-+ bat->num_properties = ARRAY_SIZE(da9030_bat_props);
-+ bat->get_property = da9030_bat_get_property;
-+ bat->use_for_apm = 1;
-+ bat->external_power_changed = da9030_external_power_changed;
-+};
-+
-+static void da9030_chiover_callback(int event, void *_charger)
-+{
-+ /* disable charger */
-+ struct da9030_charger *charger = _charger;
-+ da9030_set_charge(charger, 0);
-+}
-+
-+static void da9030_tbat_callback(int event, void *_charger)
-+{
-+ /* disable charger */
-+ struct da9030_charger *charger = _charger;
-+ da9030_set_charge(charger, 0);
-+}
-+
-+static void da9030_vbat_callback(int event, void *_charger)
-+{
-+ struct da9030_charger *charger = _charger;
-+ da9030_read_adc(&charger->adc);
-+
-+ if (charger->is_charging) {
-+ if (charger->adc.vbat_res < VBAT_LOW_THRESHOLD) {
-+ /* set VBAT threshold for critical */
-+ da9030_set_reg(VBATMON, VBAT_CRIT_THRESHOLD);
-+ }
-+ else if (charger->adc.vbat_res < VBAT_CRIT_THRESHOLD) {
-+ /* notify the system of battery critical */
-+ apm_queue_event(APM_CRITICAL_SUSPEND);
-+ }
-+ }
-+}
-+
-+static void da9030_ccto_callback(int event, void *_charger)
-+{
-+ /* x3 */
-+}
-+
-+static void da9030_tcto_callback(int event, void *_charger)
-+{
-+ /* x3 */
-+}
-+
-+static void da9030_chdet_callback(int event, void *_charger)
-+{
-+ struct da9030_charger *charger = _charger;
-+ int status = da9030_get_status();
-+ da9030_set_charge(charger, !!(status & CHRG_CHARGER_ENABLE));
-+}
-+
-+static int da9030_battery_probe(struct platform_device *pdev)
-+{
-+ struct da9030_charger *charger;
-+
-+ pr_debug("%s\n", __FUNCTION__);
-+ charger = kzalloc(sizeof(*charger), GFP_KERNEL);
-+ if (charger == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+ charger->dev = &pdev->dev;
-+
-+ charger->interval = 10 * HZ; /* 10 seconds between monotor runs */
-+ da9030_setup_battery(&charger->bat);
-+
-+ platform_set_drvdata(pdev, charger);
-+
-+ da9030_enable_adc();
-+
-+ INIT_DELAYED_WORK(&charger->work, da9030_charging_monitor);
-+ schedule_delayed_work(&charger->work, charger->interval);
-+
-+ charger->debug_file = da9030_create_debugfs(charger);
-+
-+ da9030_setup_battery(&charger->bat);
-+
-+ da9030_register_callback(DA9030_IRQ_CHDET,
-+ da9030_chdet_callback,
-+ charger);
-+ da9030_register_callback(DA9030_IRQ_VBATMON,
-+ da9030_vbat_callback,
-+ charger);
-+
-+ /* critical condition events */
-+ da9030_register_callback(DA9030_IRQ_CHIOVER,
-+ da9030_chiover_callback,
-+ charger);
-+ da9030_register_callback(DA9030_IRQ_TBAT,
-+ da9030_tbat_callback,
-+ charger);
-+
-+ /* timer events */
-+ da9030_register_callback(DA9030_IRQ_TCTO,
-+ da9030_tcto_callback,
-+ charger);
-+ da9030_register_callback(DA9030_IRQ_CCTO,
-+ da9030_ccto_callback,
-+ charger);
-+
-+ power_supply_register(&pdev->dev, &charger->bat);
-+
-+ return 0;
-+}
-+
-+static int da9030_battery_remove(struct platform_device *dev)
-+{
-+ struct da9030_charger *charger = platform_get_drvdata(dev);
-+
-+ pr_debug("%s\n", __FUNCTION__);
-+ da9030_remove_debugfs(charger);
-+ cancel_delayed_work(&charger->work);
-+ power_supply_unregister(&charger->bat);
-+ kfree(charger);
-+ return 0;
-+}
-+
-+static struct platform_driver da9030_battery_driver = {
-+ .driver = {
-+ .name = "da9030-battery",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = da9030_battery_probe,
-+ .remove = da9030_battery_remove,
-+};
-+
-+static int da9030_battery_init(void)
-+{
-+ pr_debug("%s\n", __FUNCTION__);
-+
-+ return platform_driver_register(&da9030_battery_driver);
-+}
-+
-+static void da9030_battery_exit(void)
-+{
-+ pr_debug("%s\n", __FUNCTION__);
-+
-+ platform_driver_unregister(&da9030_battery_driver);
-+}
-+
-+module_init(da9030_battery_init);
-+module_exit(da9030_battery_exit);
-+
-+MODULE_DESCRIPTION("DA9030 charger driver");
-+MODULE_AUTHOR("Mike Rapoport");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
-index 767aed5..4c44a7a 100644
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -195,6 +195,26 @@ config USB_M66592
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-+config USB_GADGET_PXA27X
-+ boolean "PXA 27x"
-+ depends on ARCH_PXA && PXA27x
-+ help
-+ Intel's PXA 27x series XScale ARM-5TE processors include
-+ an integrated full speed USB 1.1 device controller.
-+
-+ It has 23 endpoints, as well as endpoint zero (for control
-+ transfers).
-+
-+ Say "y" to link the driver statically, or "m" to build a
-+ dynamically linked module called "pxa27x_udc" and force all
-+ gadget drivers to also be dynamically linked.
-+
-+config USB_PXA27X
-+ tristate
-+ depends on USB_GADGET_PXA27X
-+ default USB_GADGET
-+ select USB_GADGET_SELECTED
-+
- config USB_GADGET_GOKU
- boolean "Toshiba TC86C001 'Goku-S'"
- depends on PCI
-diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
-index 1bc0f03..b8743bf 100644
---- a/drivers/usb/gadget/Makefile
-+++ b/drivers/usb/gadget/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
- obj-$(CONFIG_USB_NET2280) += net2280.o
- obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o
- obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
-+obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o
- obj-$(CONFIG_USB_GOKU) += goku_udc.o
- obj-$(CONFIG_USB_OMAP) += omap_udc.o
- obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
-diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
-index 3aa46cf..d7d5550 100644
---- a/drivers/usb/gadget/epautoconf.c
-+++ b/drivers/usb/gadget/epautoconf.c
-@@ -228,14 +228,19 @@ find_ep (struct usb_gadget *gadget, const char *name)
- *
- * On failure, this returns a null endpoint descriptor.
- */
--struct usb_ep * __devinit usb_ep_autoconfig (
-+struct usb_ep * usb_ep_autoconfig (
- struct usb_gadget *gadget,
-- struct usb_endpoint_descriptor *desc
-+ struct usb_endpoint_descriptor *desc,
-+ struct usb_endpoint_config *epconfig, int numconfigs
- )
- {
- struct usb_ep *ep;
- u8 type;
-
-+ /* Use device specific ep allocation code if provided */
-+ if (gadget->ops->ep_alloc)
-+ return gadget->ops->ep_alloc(gadget, desc, epconfig, numconfigs);
-+
- type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-
- /* First, apply chip-specific "best usage" knowledge.
-diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
-index 593e235..87aa9fb 100644
---- a/drivers/usb/gadget/ether.c
-+++ b/drivers/usb/gadget/ether.c
-@@ -1350,6 +1350,10 @@ static void rndis_response_complete (struct usb_ep *ep, struct usb_request *req)
- /* done sending after USB_CDC_GET_ENCAPSULATED_RESPONSE */
- }
-
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+int write_ep0_zlp(void);
-+#endif
-+
- static void rndis_command_complete (struct usb_ep *ep, struct usb_request *req)
- {
- struct eth_dev *dev = ep->driver_data;
-@@ -1360,6 +1364,10 @@ static void rndis_command_complete (struct usb_ep *ep, struct usb_request *req)
- status = rndis_msg_parser (dev->rndis_config, (u8 *) req->buf);
- if (status < 0)
- ERROR(dev, "%s: rndis parse error %d\n", __FUNCTION__, status);
-+
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+ write_ep0_zlp();
-+#endif
- spin_unlock(&dev->lock);
- }
-
-@@ -2287,7 +2295,8 @@ eth_bind (struct usb_gadget *gadget)
- struct eth_dev *dev;
- struct net_device *net;
- u8 cdc = 1, zlp = 1, rndis = 1;
-- struct usb_ep *in_ep, *out_ep, *status_ep = NULL;
-+ struct usb_ep *in_ep = NULL , *out_ep = NULL, *status_ep = NULL;
-+ struct usb_endpoint_config ep_config[2];
- int status = -ENOMEM;
- int gcnum;
-
-@@ -2386,7 +2395,30 @@ eth_bind (struct usb_gadget *gadget)
-
- /* all we really need is bulk IN/OUT */
- usb_ep_autoconfig_reset (gadget);
-- in_ep = usb_ep_autoconfig (gadget, &fs_source_desc);
-+
-+ ep_config[0].config = DEV_CONFIG_VALUE;
-+#if defined(DEV_CONFIG_CDC)
-+ ep_config[0].interface = data_intf.bInterfaceNumber;
-+ ep_config[0].altinterface = data_intf.bAlternateSetting;
-+#else /* DEV_CONFIG_SUBSET */
-+ ep_config[0].interface = subset_data_intf.bInterfaceNumber;
-+ ep_config[0].altinterface = subset_data_intf.bAlternateSetting;
-+#endif
-+
-+#ifdef CONFIG_USB_ETH_RNDIS
-+ ep_config[1].config = DEV_RNDIS_CONFIG_VALUE;
-+#ifdef CONFIG_USB_GADGET_PXA27X
-+ ep_config[1].interface = 0;
-+#else
-+ ep_config[1].interface = rndis_data_intf.bInterfaceNumber;
-+#endif
-+ ep_config[1].altinterface = rndis_data_intf.bAlternateSetting;
-+
-+ in_ep = usb_ep_autoconfig(gadget, &fs_source_desc, &ep_config[0], 2);
-+#else
-+ in_ep = usb_ep_autoconfig(gadget, &fs_source_desc, &ep_config[0], 1);
-+#endif
-+
- if (!in_ep) {
- autoconf_fail:
- dev_err (&gadget->dev,
-@@ -2396,7 +2428,12 @@ autoconf_fail:
- }
- in_ep->driver_data = in_ep; /* claim */
-
-- out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
-+#ifdef CONFIG_USB_ETH_RNDIS
-+ out_ep = usb_ep_autoconfig(gadget, &fs_sink_desc, &ep_config[0], 2);
-+#else
-+ out_ep = usb_ep_autoconfig(gadget, &fs_sink_desc, &ep_config[0], 1);
-+#endif
-+
- if (!out_ep)
- goto autoconf_fail;
- out_ep->driver_data = out_ep; /* claim */
-@@ -2406,7 +2443,25 @@ autoconf_fail:
- * Since some hosts expect one, try to allocate one anyway.
- */
- if (cdc || rndis) {
-- status_ep = usb_ep_autoconfig (gadget, &fs_status_desc);
-+#ifdef DEV_CONFIG_CDC
-+ ep_config[0].config = DEV_CONFIG_VALUE;
-+ ep_config[0].interface = control_intf.bInterfaceNumber;
-+ ep_config[0].altinterface = control_intf.bAlternateSetting;
-+#endif
-+#ifdef CONFIG_USB_ETH_RNDIS
-+ ep_config[1].config = DEV_RNDIS_CONFIG_VALUE;
-+ ep_config[1].interface = rndis_control_intf.bInterfaceNumber;
-+ ep_config[1].altinterface = rndis_control_intf.bAlternateSetting;
-+#endif
-+
-+#if defined(DEV_CONFIG_CDC) && defined(CONFIG_USB_ETH_RNDIS)
-+ status_ep = usb_ep_autoconfig(gadget, &fs_status_desc, &ep_config[0], 2);
-+#elif defined(CONFIG_USB_ETH_RNDIS)
-+ status_ep = usb_ep_autoconfig(gadget, &fs_status_desc, &ep_config[1], 1);
-+#else
-+ status_ep = usb_ep_autoconfig(gadget, &fs_status_desc, &ep_config[0], 1);
-+#endif
-+
- if (status_ep) {
- status_ep->driver_data = status_ep; /* claim */
- } else if (rndis) {
-diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
-index 965ad7b..b9cd8c9 100644
---- a/drivers/usb/gadget/file_storage.c
-+++ b/drivers/usb/gadget/file_storage.c
-@@ -3841,6 +3841,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
- struct usb_ep *ep;
- struct usb_request *req;
- char *pathbuf, *p;
-+ struct usb_endpoint_config ep_config;
-
- fsg->gadget = gadget;
- set_gadget_data(gadget, fsg);
-@@ -3911,21 +3912,25 @@ static int __init fsg_bind(struct usb_gadget *gadget)
- }
-
- /* Find all the endpoints we will use */
-+ ep_config.config = CONFIG_VALUE;
-+ ep_config.interface = intf_desc.bInterfaceNumber;
-+ ep_config.altinterface = intf_desc.bAlternateSetting;
-+
- usb_ep_autoconfig_reset(gadget);
-- ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc);
-+ ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc, &ep_config, 1);
- if (!ep)
- goto autoconf_fail;
- ep->driver_data = fsg; // claim the endpoint
- fsg->bulk_in = ep;
-
-- ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc);
-+ ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc, &ep_config, 1);
- if (!ep)
- goto autoconf_fail;
- ep->driver_data = fsg; // claim the endpoint
- fsg->bulk_out = ep;
-
- if (transport_is_cbi()) {
-- ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc);
-+ ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc, &ep_config, 1);
- if (!ep)
- goto autoconf_fail;
- ep->driver_data = fsg; // claim the endpoint
-diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
-new file mode 100644
-index 0000000..d4270d4
---- /dev/null
-+++ b/drivers/usb/gadget/pxa27x_udc.c
-@@ -0,0 +1,2387 @@
-+/*
-+ * Handles the Intel 27x USB Device Controller (UDC)
-+ *
-+ * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
-+ * Copyright (C) 2003 Robert Schwebel, Pengutronix
-+ * Copyright (C) 2003 Benedikt Spranger, Pengutronix
-+ * Copyright (C) 2003 David Brownell
-+ * Copyright (C) 2003 Joshua Wise
-+ * Copyright (C) 2004 Intel Corporation
-+ * Copyright (C) 2005 SDG Systems, LLC (Aric Blumer)
-+ * Copyright (C) 2005-2006 Openedhand Ltd. (Richard Purdie)
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+#undef DEBUG
-+//#define DEBUG 1
-+//#define VERBOSE DBG_VERBOSE
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/ioport.h>
-+#include <linux/types.h>
-+#include <linux/version.h>
-+#include <linux/errno.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/timer.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/proc_fs.h>
-+#include <linux/mm.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/dma.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/mach-types.h>
-+#include <asm/unaligned.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/pxa-regs.h>
-+
-+#include <linux/usb/ch9.h>
-+#include <linux/usb_gadget.h>
-+
-+#include <asm/arch/udc.h>
-+
-+/*
-+ * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x
-+ * series processors.
-+ *
-+ * Such controller drivers work with a gadget driver. The gadget driver
-+ * returns descriptors, implements configuration and data protocols used
-+ * by the host to interact with this device, and allocates endpoints to
-+ * the different protocol interfaces. The controller driver virtualizes
-+ * usb hardware so that the gadget drivers will be more portable.
-+ *
-+ * This UDC hardware wants to implement a bit too much USB protocol. The
-+ * biggest issue is that the endpoints have to be setup before the controller
-+ * can be enabled and each endpoint can only have one configuration, interface
-+ * and alternative interface number. Once enabled, these cannot be changed
-+ * without a controller reset.
-+ *
-+ * Intel Errata #22 mentions issues when changing alternate interface.
-+ * The exact meaning of this remains uncertain as gadget drivers using alternate
-+ * interfaces such as CDC-Ethernet appear to work...
-+ */
-+
-+#define DRIVER_VERSION "01-01-2006"
-+#define DRIVER_DESC "PXA 27x USB Device Controller driver"
-+
-+static const char driver_name [] = "pxa27x_udc";
-+
-+static const char ep0name [] = "ep0";
-+
-+
-+#define USE_DMA
-+//#undef USE_DMA
-+
-+#ifdef CONFIG_PROC_FS
-+#define UDC_PROC_FILE
-+#endif
-+
-+#include "pxa27x_udc.h"
-+
-+#ifdef USE_DMA
-+static int use_dma = 1;
-+module_param(use_dma, bool, 0);
-+MODULE_PARM_DESC(use_dma, "true to use dma");
-+
-+static void dma_nodesc_handler(int dmach, void *_ep);
-+static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req);
-+
-+#define DMASTR " (dma support)"
-+
-+#else /* !USE_DMA */
-+#define DMASTR " (pio only)"
-+#endif
-+
-+#define UDCISR0_IR0 0x3
-+#define UDCISR_INT_MASK (UDC_INT_FIFOERROR | UDC_INT_PACKETCMP)
-+#define UDCICR_INT_MASK UDCISR_INT_MASK
-+
-+#define UDCCSR_MASK (UDCCSR_FST | UDCCSR_DME)
-+
-+static void pxa27x_ep_fifo_flush(struct usb_ep *ep);
-+static void nuke(struct pxa27x_ep *, int status);
-+static void udc_init_ep(struct pxa27x_udc *dev);
-+
-+
-+/*
-+ * Endpoint Functions
-+ */
-+static void pio_irq_enable(int ep_num)
-+{
-+ if (ep_num < 16)
-+ UDCICR0 |= 3 << (ep_num * 2);
-+ else {
-+ ep_num -= 16;
-+ UDCICR1 |= 3 << (ep_num * 2);
-+ }
-+}
-+
-+static void pio_irq_disable(int ep_num)
-+{
-+ ep_num &= 0xf;
-+ if (ep_num < 16)
-+ UDCICR0 &= ~(3 << (ep_num * 2));
-+ else {
-+ ep_num -= 16;
-+ UDCICR1 &= ~(3 << (ep_num * 2));
-+ }
-+}
-+
-+/* The UDCCR reg contains mask and interrupt status bits,
-+ * so using '|=' isn't safe as it may ack an interrupt.
-+ */
-+#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_UDE)
-+
-+static inline void udc_set_mask_UDCCR(int mask)
-+{
-+ UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
-+}
-+
-+static inline void udc_clear_mask_UDCCR(int mask)
-+{
-+ UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
-+}
-+
-+static inline void udc_ack_int_UDCCR(int mask)
-+{
-+ /* udccr contains the bits we dont want to change */
-+ __u32 udccr = UDCCR & UDCCR_MASK_BITS;
-+
-+ UDCCR = udccr | (mask & ~UDCCR_MASK_BITS);
-+}
-+
-+/*
-+ * Endpoint enable/disable
-+ *
-+ * Not much to do here as the ep_alloc function sets up most things. Once
-+ * enabled, not much of the pxa27x configuration can be changed.
-+ *
-+ */
-+static int pxa27x_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
-+{
-+ struct pxa27x_virt_ep *virt_ep = container_of(_ep, struct pxa27x_virt_ep, usb_ep);
-+ struct pxa27x_ep *ep = virt_ep->pxa_ep;
-+ struct pxa27x_udc *dev;
-+
-+ if (!_ep || !desc || _ep->name == ep0name
-+ || desc->bDescriptorType != USB_DT_ENDPOINT
-+ || ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
-+ dev_err(ep->dev->dev, "%s, bad ep or descriptor\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ /* xfer types must match, except that interrupt ~= bulk */
-+ if( ep->ep_type != USB_ENDPOINT_XFER_BULK
-+ && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
-+ dev_err(ep->dev->dev, "%s, %s type mismatch\n", __FUNCTION__, _ep->name);
-+ return -EINVAL;
-+ }
-+
-+ /* hardware _could_ do smaller, but driver doesn't */
-+ if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-+ && le16_to_cpu (desc->wMaxPacketSize)
-+ != BULK_FIFO_SIZE)
-+ || !desc->wMaxPacketSize) {
-+ dev_err(ep->dev->dev, "%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
-+ return -ERANGE;
-+ }
-+
-+ dev = ep->dev;
-+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
-+ dev_err(ep->dev->dev, "%s, bogus device state\n", __FUNCTION__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ ep->desc = desc;
-+ ep->dma = -1;
-+ ep->stopped = 0;
-+ ep->pio_irqs = ep->dma_irqs = 0;
-+ ep->usb_ep->maxpacket = le16_to_cpu(desc->wMaxPacketSize);
-+
-+ /* flush fifo (mostly for OUT buffers) */
-+ pxa27x_ep_fifo_flush(_ep);
-+
-+ /* ... reset halt state too, if we could ... */
-+
-+#ifdef USE_DMA
-+ /* for (some) bulk and ISO endpoints, try to get a DMA channel and
-+ * bind it to the endpoint. otherwise use PIO.
-+ */
-+ dev_dbg(ep->dev->dev, "%s: called attributes=%d\n", __FUNCTION__, ep->ep_type);
-+ switch (ep->ep_type) {
-+ case USB_ENDPOINT_XFER_ISOC:
-+ if (le16_to_cpu(desc->wMaxPacketSize) % 32)
-+ break;
-+ // fall through
-+ case USB_ENDPOINT_XFER_BULK:
-+ if (!use_dma || !ep->reg_drcmr)
-+ break;
-+ ep->dma = pxa_request_dma((char *)_ep->name, (le16_to_cpu(desc->wMaxPacketSize) > 64)
-+ ? DMA_PRIO_MEDIUM : DMA_PRIO_LOW, dma_nodesc_handler, ep);
-+ if (ep->dma >= 0) {
-+ *ep->reg_drcmr = DRCMR_MAPVLD | ep->dma;
-+ dev_dbg(ep->dev->dev, "%s using dma%d\n", _ep->name, ep->dma);
-+ }
-+ default:
-+ break;
-+ }
-+#endif
-+ DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
-+ return 0;
-+}
-+
-+static int pxa27x_ep_disable(struct usb_ep *_ep)
-+{
-+ struct pxa27x_virt_ep *virt_ep = container_of(_ep, struct pxa27x_virt_ep, usb_ep);
-+ struct pxa27x_ep *ep = virt_ep->pxa_ep;
-+ unsigned long flags;
-+
-+ if (!_ep || !ep->desc) {
-+ dev_err(ep->dev->dev, "%s, %s not enabled\n", __FUNCTION__,
-+ _ep ? _ep->name : NULL);
-+ return -EINVAL;
-+ }
-+ local_irq_save(flags);
-+ nuke(ep, -ESHUTDOWN);
-+
-+#ifdef USE_DMA
-+ if (ep->dma >= 0) {
-+ *ep->reg_drcmr = 0;
-+ pxa_free_dma(ep->dma);
-+ ep->dma = -1;
-+ }
-+#endif
-+
-+ /* flush fifo (mostly for IN buffers) */
-+ pxa27x_ep_fifo_flush(_ep);
-+
-+ ep->desc = 0;
-+ ep->stopped = 1;
-+
-+ local_irq_restore(flags);
-+ DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
-+ return 0;
-+}
-+
-+
-+
-+/* for the pxa27x, these can just wrap kmalloc/kfree. gadget drivers
-+ * must still pass correctly initialized endpoints, since other controller
-+ * drivers may care about how it's currently set up (dma issues etc).
-+ */
-+
-+/*
-+ * pxa27x_ep_alloc_request - allocate a request data structure
-+ */
-+static struct usb_request *
-+pxa27x_ep_alloc_request(struct usb_ep *_ep, unsigned gfp_flags)
-+{
-+ struct pxa27x_request *req;
-+
-+ req = kzalloc(sizeof *req, gfp_flags);
-+ if (!req)
-+ return 0;
-+
-+ INIT_LIST_HEAD(&req->queue);
-+ return &req->req;
-+}
-+
-+
-+/*
-+ * pxa27x_ep_free_request - deallocate a request data structure
-+ */
-+static void
-+pxa27x_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+ struct pxa27x_request *req;
-+
-+ req = container_of(_req, struct pxa27x_request, req);
-+ WARN_ON(!list_empty(&req->queue));
-+ kfree(req);
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * done - retire a request; caller blocked irqs
-+ */
-+static void done(struct pxa27x_ep *ep, struct pxa27x_request *req, int status)
-+{
-+ list_del_init(&req->queue);
-+ if (likely (req->req.status == -EINPROGRESS))
-+ req->req.status = status;
-+ else
-+ status = req->req.status;
-+
-+ if (status && status != -ESHUTDOWN)
-+ DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n",
-+ ep->usb_ep->name, &req->req, status,
-+ req->req.actual, req->req.length);
-+
-+ /* don't modify queue heads during completion callback */
-+ req->req.complete(ep->usb_ep, &req->req);
-+}
-+
-+
-+static inline void ep0_idle(struct pxa27x_udc *dev)
-+{
-+ dev->ep0state = EP0_IDLE;
-+}
-+
-+static int write_packet(volatile u32 *uddr, struct pxa27x_request *req, unsigned max)
-+{
-+ u32 *buf;
-+ int length, count, remain;
-+
-+ buf = (u32*)(req->req.buf + req->req.actual);
-+ prefetch(buf);
-+
-+ /* how big will this packet be? */
-+ length = min(req->req.length - req->req.actual, max);
-+ req->req.actual += length;
-+
-+ remain = length & 0x3;
-+ count = length & ~(0x3);
-+
-+ //dev_dbg(ep->dev->dev, "Length %d, Remain %d, Count %d\n",length, remain, count);
-+
-+ while (likely(count)) {
-+ //dev_dbg(ep->dev->dev, "Sending:0x%x\n", *buf);
-+ *uddr = *buf++;
-+ count -= 4;
-+ }
-+
-+ if (remain) {
-+ volatile u8* reg=(u8*)uddr;
-+ char *rd =(u8*)buf;
-+
-+ while (remain--) {
-+ *reg=*rd++;
-+ }
-+ }
-+
-+ return length;
-+}
-+
-+/*
-+ * write to an IN endpoint fifo, as many packets as possible.
-+ * irqs will use this to write the rest later.
-+ * caller guarantees at least one packet buffer is ready (or a zlp).
-+ */
-+static int
-+write_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req)
-+{
-+ unsigned max;
-+
-+ max = le16_to_cpu(ep->desc->wMaxPacketSize);
-+ do {
-+ int count, is_last, is_short;
-+
-+ //dev_dbg(ep->dev->dev, "write_fifo7 %x\n", *ep->reg_udccsr);
-+
-+ if (*ep->reg_udccsr & UDCCSR_PC) {
-+ //dev_dbg(ep->dev->dev, "Transmit Complete\n");
-+ *ep->reg_udccsr = UDCCSR_PC | (*ep->reg_udccsr & UDCCSR_MASK);
-+ }
-+
-+ if (*ep->reg_udccsr & UDCCSR_TRN) {
-+ //dev_dbg(ep->dev->dev, "Clearing Underrun\n");
-+ *ep->reg_udccsr = UDCCSR_TRN | (*ep->reg_udccsr & UDCCSR_MASK);
-+ }
-+ //dev_dbg(ep->dev->dev, "write_fifo8 %x\n", *ep->reg_udccsr);
-+
-+ count = write_packet(ep->reg_udcdr, req, max);
-+
-+ /* last packet is usually short (or a zlp) */
-+ if (unlikely (count != max))
-+ is_last = is_short = 1;
-+ else {
-+ if (likely(req->req.length != req->req.actual)
-+ || req->req.zero)
-+ is_last = 0;
-+ else
-+ is_last = 1;
-+ /* interrupt/iso maxpacket may not fill the fifo */
-+ is_short = unlikely (max < ep->fifo_size);
-+ }
-+
-+ //dev_dbg(ep->dev->dev, "write_fifo0 %x\n", *ep->reg_udccsr);
-+
-+ dev_dbg(ep->dev->dev, "wrote %s count:%d bytes%s%s %d left %p\n",
-+ ep->usb_ep->name, count,
-+ is_last ? "/L" : "", is_short ? "/S" : "",
-+ req->req.length - req->req.actual, &req->req);
-+
-+ /* let loose that packet. maybe try writing another one,
-+ * double buffering might work.
-+ */
-+
-+ if (is_short)
-+ *ep->reg_udccsr = UDCCSR_SP | (*ep->reg_udccsr & UDCCSR_MASK);
-+
-+ dev_dbg(ep->dev->dev, "write_fifo0.5 %x\n", *ep->reg_udccsr);
-+
-+ /* requests complete when all IN data is in the FIFO */
-+ if (is_last) {
-+ done(ep, req, 0);
-+ if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) {
-+ pio_irq_disable(ep->pxa_ep_num);
-+ //dev_dbg(ep->dev->dev, "write_fifo1 %x\n", *ep->reg_udccsr);
-+#ifdef USE_DMA
-+ /* unaligned data and zlps couldn't use dma */
-+ if (unlikely(!list_empty(&ep->queue))) {
-+ req = list_entry(ep->queue.next,
-+ struct pxa27x_request, queue);
-+ kick_dma(ep,req);
-+ return 0;
-+ }
-+#endif
-+ }
-+ //dev_dbg(ep->dev->dev, "write_fifo2 %x\n", *ep->reg_udccsr);
-+ return 1;
-+ }
-+
-+ // TODO experiment: how robust can fifo mode tweaking be?
-+ // double buffering is off in the default fifo mode, which
-+ // prevents TFS from being set here.
-+
-+ } while (*ep->reg_udccsr & UDCCSR_FS);
-+ //dev_dbg(ep->dev->dev, "write_fifo2 %x\n", *ep->reg_udccsr);
-+ return 0;
-+}
-+
-+/* caller asserts req->pending (ep0 irq status nyet cleared); starts
-+ * ep0 data stage. these chips want very simple state transitions.
-+ */
-+static inline
-+void ep0start(struct pxa27x_udc *dev, u32 flags, const char *tag)
-+{
-+ UDCCSR0 = flags|UDCCSR0_SA|UDCCSR0_OPC;
-+ UDCISR0 = UDCICR_INT(0, UDC_INT_FIFOERROR | UDC_INT_PACKETCMP);
-+ dev->req_pending = 0;
-+ DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
-+ __FUNCTION__, tag, UDCCSR0, flags);
-+}
-+
-+static int
-+write_ep0_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req)
-+{
-+ unsigned count;
-+ int is_short;
-+
-+ count = write_packet(&UDCDR0, req, EP0_FIFO_SIZE);
-+ ep->dev->stats.write.bytes += count;
-+
-+ /* last packet "must be" short (or a zlp) */
-+ is_short = (count != EP0_FIFO_SIZE);
-+
-+ DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count,
-+ req->req.length - req->req.actual, &req->req);
-+
-+ if (unlikely (is_short)) {
-+ if (ep->dev->req_pending)
-+ ep0start(ep->dev, UDCCSR0_IPR, "short IN");
-+ else
-+ UDCCSR0 = UDCCSR0_IPR;
-+
-+ count = req->req.length;
-+ done(ep, req, 0);
-+ ep0_idle(ep->dev);
-+#if 0
-+ /* This seems to get rid of lost status irqs in some cases:
-+ * host responds quickly, or next request involves config
-+ * change automagic, or should have been hidden, or ...
-+ *
-+ * FIXME get rid of all udelays possible...
-+ */
-+ if (count >= EP0_FIFO_SIZE) {
-+ count = 100;
-+ do {
-+ if ((UDCCSR0 & UDCCSR0_OPC) != 0) {
-+ /* clear OPC, generate ack */
-+ UDCCSR0 = UDCCSR0_OPC;
-+ break;
-+ }
-+ count--;
-+ udelay(1);
-+ } while (count);
-+ }
-+#endif
-+ } else if (ep->dev->req_pending)
-+ ep0start(ep->dev, 0, "IN");
-+ return is_short;
-+}
-+
-+
-+/*
-+ * read_fifo - unload packet(s) from the fifo we use for usb OUT
-+ * transfers and put them into the request. caller should have made
-+ * sure there's at least one packet ready.
-+ *
-+ * returns true if the request completed because of short packet or the
-+ * request buffer having filled (and maybe overran till end-of-packet).
-+ */
-+static int read_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req)
-+{
-+ for (;;) {
-+ u32 *buf;
-+ int bufferspace, count, is_short;
-+
-+ /* make sure there's a packet in the FIFO.*/
-+ if (unlikely ((*ep->reg_udccsr & UDCCSR_PC) == 0))
-+ break;
-+ buf =(u32*) (req->req.buf + req->req.actual);
-+ prefetchw(buf);
-+ bufferspace = req->req.length - req->req.actual;
-+
-+ /* read all bytes from this packet */
-+ if (likely (*ep->reg_udccsr & UDCCSR_BNE)) {
-+ count = 0x3ff & *ep->reg_udcbcr;
-+ req->req.actual += min(count, bufferspace);
-+ } else /* zlp */
-+ count = 0;
-+
-+ is_short = (count < ep->usb_ep->maxpacket);
-+ dev_dbg(ep->dev->dev, "read %s udccsr:%02x, count:%d bytes%s req %p %d/%d\n",
-+ ep->usb_ep->name, *ep->reg_udccsr, count,
-+ is_short ? "/S" : "",
-+ &req->req, req->req.actual, req->req.length);
-+
-+ count = min(count, bufferspace);
-+ while (likely (count > 0)) {
-+ *buf++ = *ep->reg_udcdr;
-+ count -= 4;
-+ }
-+ dev_dbg(ep->dev->dev, "Buf:0x%p\n", req->req.buf);
-+
-+ *ep->reg_udccsr = UDCCSR_PC;
-+ /* RPC/RSP/RNE could now reflect the other packet buffer */
-+
-+ /* completion */
-+ if (is_short || req->req.actual == req->req.length) {
-+ done(ep, req, 0);
-+ if (list_empty(&ep->queue))
-+ pio_irq_disable(ep->pxa_ep_num);
-+ return 1;
-+ }
-+
-+ /* finished that packet. the next one may be waiting... */
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * special ep0 version of the above. no UBCR0 or double buffering; status
-+ * handshaking is magic. most device protocols don't need control-OUT.
-+ * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other
-+ * protocols do use them.
-+ */
-+static int read_ep0_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req)
-+{
-+ u32 *buf, word;
-+ unsigned bufferspace;
-+
-+ buf = (u32*) (req->req.buf + req->req.actual);
-+ bufferspace = req->req.length - req->req.actual;
-+
-+ while (UDCCSR0 & UDCCSR0_RNE) {
-+ word = UDCDR0;
-+
-+ if (unlikely (bufferspace == 0)) {
-+ /* this happens when the driver's buffer
-+ * is smaller than what the host sent.
-+ * discard the extra data.
-+ */
-+ if (req->req.status != -EOVERFLOW)
-+ dev_info(ep->dev->dev, "%s overflow\n", ep->usb_ep->name);
-+ req->req.status = -EOVERFLOW;
-+ } else {
-+ *buf++ = word;
-+ req->req.actual += 4;
-+ bufferspace -= 4;
-+ }
-+ }
-+
-+ UDCCSR0 = UDCCSR0_OPC ;
-+
-+ /* completion */
-+ if (req->req.actual >= req->req.length)
-+ return 1;
-+
-+ /* finished that packet. the next one may be waiting... */
-+ return 0;
-+}
-+
-+#ifdef USE_DMA
-+
-+#define MAX_IN_DMA ((DCMD_LENGTH + 1) - BULK_FIFO_SIZE)
-+static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req)
-+{
-+ u32 dcmd = 0;
-+ u32 len = req->req.length;
-+ u32 buf = req->req.dma;
-+ u32 fifo = io_v2p((u32)ep->reg_udcdr);
-+
-+ buf += req->req.actual;
-+ len -= req->req.actual;
-+ ep->dma_con = 0;
-+
-+ DMSG("%s: req:0x%p length:%d, actual:%d dma:%d\n",
-+ __FUNCTION__, &req->req, req->req.length,
-+ req->req.actual,ep->dma);
-+
-+ /* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */
-+ DCSR(ep->dma) = DCSR_NODESC;
-+ if (buf & 0x3)
-+ DALGN |= 1 << ep->dma;
-+ else
-+ DALGN &= ~(1 << ep->dma);
-+
-+ if (ep->dir_in) {
-+ DSADR(ep->dma) = buf;
-+ DTADR(ep->dma) = fifo;
-+ if (len > MAX_IN_DMA) {
-+ len= MAX_IN_DMA;
-+ ep->dma_con =1 ;
-+ } else if (len >= ep->usb_ep->maxpacket) {
-+ if ((ep->dma_con = (len % ep->usb_ep->maxpacket) != 0))
-+ len = ep->usb_ep->maxpacket;
-+ }
-+ dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN
-+ | DCMD_FLOWTRG | DCMD_INCSRCADDR;
-+ } else {
-+ DSADR(ep->dma) = fifo;
-+ DTADR(ep->dma) = buf;
-+ dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN
-+ | DCMD_FLOWSRC | DCMD_INCTRGADDR;
-+ }
-+ *ep->reg_udccsr = UDCCSR_DME;
-+ DCMD(ep->dma) = dcmd;
-+ DCSR(ep->dma) = DCSR_NODESC | DCSR_EORIRQEN \
-+ | ((ep->dir_in) ? DCSR_STOPIRQEN : 0);
-+ *ep->reg_drcmr = ep->dma | DRCMR_MAPVLD;
-+ DCSR(ep->dma) |= DCSR_RUN;
-+}
-+
-+static void cancel_dma(struct pxa27x_ep *ep)
-+{
-+ struct pxa27x_request *req;
-+ u32 tmp;
-+
-+ if (DCSR(ep->dma) == 0 || list_empty(&ep->queue))
-+ return;
-+
-+ DMSG("hehe dma:%d,dcsr:0x%x\n", ep->dma, DCSR(ep->dma));
-+ DCSR(ep->dma) = 0;
-+ while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0)
-+ cpu_relax();
-+
-+ req = list_entry(ep->queue.next, struct pxa27x_request, queue);
-+ tmp = DCMD(ep->dma) & DCMD_LENGTH;
-+ req->req.actual = req->req.length - tmp;
-+
-+ /* the last tx packet may be incomplete, so flush the fifo.
-+ * FIXME correct req.actual if we can
-+ */
-+ *ep->reg_udccsr = UDCCSR_FEF;
-+}
-+
-+static void dma_nodesc_handler(int dmach, void *_ep)
-+{
-+ struct pxa27x_ep *ep = _ep;
-+ struct pxa27x_request *req, *req_next;
-+ u32 dcsr, tmp, completed;
-+
-+ local_irq_disable();
-+
-+ req = list_entry(ep->queue.next, struct pxa27x_request, queue);
-+
-+ DMSG("%s, buf:0x%p\n",__FUNCTION__, req->req.buf);
-+
-+ ep->dma_irqs++;
-+ ep->dev->stats.irqs++;
-+
-+ completed = 0;
-+
-+ dcsr = DCSR(dmach);
-+ DCSR(ep->dma) &= ~DCSR_RUN;
-+
-+ if (dcsr & DCSR_BUSERR) {
-+ DCSR(dmach) = DCSR_BUSERR;
-+ dev_err(ep->dev->dev, "DMA Bus Error\n");
-+ req->req.status = -EIO;
-+ completed = 1;
-+ } else if (dcsr & DCSR_ENDINTR) {
-+ DCSR(dmach) = DCSR_ENDINTR;
-+ if (ep->dir_in) {
-+ tmp = req->req.length - req->req.actual;
-+ /* Last packet is a short one*/
-+ if (tmp < ep->usb_ep->maxpacket) {
-+ int count = 0;
-+
-+ *ep->reg_udccsr = UDCCSR_SP | \
-+ (*ep->reg_udccsr & UDCCSR_MASK);
-+ /*Wait for packet out */
-+ while( (count++ < 10000) && \
-+ !(*ep->reg_udccsr & UDCCSR_FS));
-+ if (count >= 10000)
-+ DMSG("Failed to send packet\n");
-+ else
-+ DMSG("%s: short packet sent len:%d,"
-+ "length:%d,actual:%d\n", __FUNCTION__,
-+ tmp, req->req.length, req->req.actual);
-+ req->req.actual = req->req.length;
-+ completed = 1;
-+ /* There are still packets to transfer */
-+ } else if ( ep->dma_con) {
-+ DMSG("%s: more packets,length:%d,actual:%d\n",
-+ __FUNCTION__,req->req.length,
-+ req->req.actual);
-+ req->req.actual += ep->usb_ep->maxpacket;
-+ completed = 0;
-+ } else {
-+ DMSG("%s: no more packets,length:%d,"
-+ "actual:%d\n", __FUNCTION__,
-+ req->req.length, req->req.actual);
-+ req->req.actual = req->req.length;
-+ completed = 1;
-+ }
-+ } else {
-+ req->req.actual = req->req.length;
-+ completed = 1;
-+ }
-+ } else if (dcsr & DCSR_EORINTR) { //Only happened in OUT DMA
-+ int remain,udccsr ;
-+
-+ DCSR(dmach) = DCSR_EORINTR;
-+ remain = DCMD(dmach) & DCMD_LENGTH;
-+ req->req.actual = req->req.length - remain;
-+
-+ udccsr = *ep->reg_udccsr;
-+ if (udccsr & UDCCSR_SP) {
-+ *ep->reg_udccsr = UDCCSR_PC | (udccsr & UDCCSR_MASK);
-+ completed = 1;
-+ }
-+ DMSG("%s: length:%d actual:%d\n",
-+ __FUNCTION__, req->req.length, req->req.actual);
-+ } else
-+ DMSG("%s: Others dma:%d DCSR:0x%x DCMD:0x%x\n",
-+ __FUNCTION__, dmach, DCSR(dmach), DCMD(dmach));
-+
-+ if (likely(completed)) {
-+ if (req->queue.next != &ep->queue) {
-+ req_next = list_entry(req->queue.next,
-+ struct pxa27x_request, queue);
-+ kick_dma(ep, req_next);
-+ }
-+ done(ep, req, 0);
-+ } else {
-+ kick_dma(ep, req);
-+ }
-+
-+ local_irq_enable();
-+}
-+
-+#endif
-+/*-------------------------------------------------------------------------*/
-+
-+static int
-+pxa27x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags)
-+{
-+ struct pxa27x_virt_ep *virt_ep;
-+ struct pxa27x_ep *ep;
-+ struct pxa27x_request *req;
-+ struct pxa27x_udc *dev;
-+ unsigned long flags;
-+
-+ virt_ep = container_of(_ep, struct pxa27x_virt_ep, usb_ep);
-+ ep = virt_ep->pxa_ep;
-+
-+ req = container_of(_req, struct pxa27x_request, req);
-+ if (unlikely (!_req || !_req->complete || !_req->buf||
-+ !list_empty(&req->queue))) {
-+ DMSG("%s, bad params\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ if (unlikely (!_ep || (!ep->desc && _ep->name != ep0name))) {
-+ DMSG("%s, bad ep\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ DMSG("%s, ep point %d is queue\n", __FUNCTION__, ep->ep_num);
-+
-+ dev = ep->dev;
-+ if (unlikely (!dev->driver
-+ || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
-+ DMSG("%s, bogus device state\n", __FUNCTION__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ /* iso is always one packet per request, that's the only way
-+ * we can report per-packet status. that also helps with dma.
-+ */
-+ if (unlikely (ep->ep_type == USB_ENDPOINT_XFER_ISOC
-+ && req->req.length > le16_to_cpu
-+ (ep->desc->wMaxPacketSize)))
-+ return -EMSGSIZE;
-+
-+#ifdef USE_DMA
-+ // FIXME caller may already have done the dma mapping
-+ if (ep->dma >= 0) {
-+ _req->dma = dma_map_single(dev->dev, _req->buf, _req->length,
-+ (ep->dir_in) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+ }
-+#endif
-+
-+ DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
-+ _ep->name, _req, _req->length, _req->buf);
-+
-+ local_irq_save(flags);
-+
-+ _req->status = -EINPROGRESS;
-+ _req->actual = 0;
-+
-+ /* kickstart this i/o queue? */
-+ if (list_empty(&ep->queue) && !ep->stopped) {
-+ if (ep->desc == 0 /* ep0 */) {
-+ unsigned length = _req->length;
-+
-+ switch (dev->ep0state) {
-+ case EP0_IN_DATA_PHASE:
-+ dev->stats.write.ops++;
-+ if (write_ep0_fifo(ep, req))
-+ req = 0;
-+ break;
-+
-+ case EP0_OUT_DATA_PHASE:
-+ dev->stats.read.ops++;
-+ if (dev->req_pending)
-+ ep0start(dev, UDCCSR0_IPR, "OUT");
-+ if (length == 0 || ((UDCCSR0 & UDCCSR0_RNE) != 0
-+ && read_ep0_fifo(ep, req))) {
-+ ep0_idle(dev);
-+ done(ep, req, 0);
-+ req = 0;
-+ }
-+ break;
-+ case EP0_NO_ACTION:
-+ ep0_idle(dev);
-+ req=0;
-+ break;
-+ default:
-+ DMSG("ep0 i/o, odd state %d\n", dev->ep0state);
-+ local_irq_restore (flags);
-+ return -EL2HLT;
-+ }
-+#ifdef USE_DMA
-+ /* either start dma or prime pio pump */
-+ } else if (ep->dma >= 0) {
-+ kick_dma(ep, req);
-+#endif
-+ /* can the FIFO can satisfy the request immediately? */
-+ } else if (ep->dir_in && (*ep->reg_udccsr & UDCCSR_FS) != 0
-+ && write_fifo(ep, req)) {
-+ req = 0;
-+ } else if ((*ep->reg_udccsr & UDCCSR_FS) != 0
-+ && read_fifo(ep, req)) {
-+ req = 0;
-+ }
-+ DMSG("req:%p,ep->desc:%p,ep->dma:%d\n", req, ep->desc, ep->dma);
-+ if (likely (req && ep->desc) && ep->dma < 0)
-+ pio_irq_enable(ep->pxa_ep_num);
-+ }
-+
-+ /* pio or dma irq handler advances the queue. */
-+ if (likely (req != 0))
-+ list_add_tail(&req->queue, &ep->queue);
-+ local_irq_restore(flags);
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * nuke - dequeue ALL requests
-+ */
-+static void nuke(struct pxa27x_ep *ep, int status)
-+{
-+ struct pxa27x_request *req;
-+
-+ /* called with irqs blocked */
-+#ifdef USE_DMA
-+ if (ep->dma >= 0 && !ep->stopped)
-+ cancel_dma(ep);
-+#endif
-+ while (!list_empty(&ep->queue)) {
-+ req = list_entry(ep->queue.next, struct pxa27x_request, queue);
-+ done(ep, req, status);
-+ }
-+ if (ep->desc)
-+ pio_irq_disable(ep->pxa_ep_num);
-+}
-+
-+
-+/* dequeue JUST ONE request */
-+static int pxa27x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+ struct pxa27x_virt_ep *virt_ep = container_of(_ep, struct pxa27x_virt_ep, usb_ep);
-+ struct pxa27x_ep *ep = virt_ep->pxa_ep;
-+ struct pxa27x_request *req;
-+ unsigned long flags;
-+
-+ if (!_ep || _ep->name == ep0name)
-+ return -EINVAL;
-+
-+ local_irq_save(flags);
-+
-+ /* make sure it's actually queued on this endpoint */
-+ list_for_each_entry(req, &ep->queue, queue) {
-+ if (&req->req == _req)
-+ break;
-+ }
-+ if (&req->req != _req) {
-+ local_irq_restore(flags);
-+ return -EINVAL;
-+ }
-+
-+#ifdef USE_DMA
-+ if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) {
-+ cancel_dma(ep);
-+ done(ep, req, -ECONNRESET);
-+ /* restart i/o */
-+ if (!list_empty(&ep->queue)) {
-+ req = list_entry(ep->queue.next,
-+ struct pxa27x_request, queue);
-+ kick_dma(ep, req);
-+ }
-+ } else
-+#endif
-+ done(ep, req, -ECONNRESET);
-+
-+ local_irq_restore(flags);
-+ return 0;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int pxa27x_ep_set_halt(struct usb_ep *_ep, int value)
-+{
-+ struct pxa27x_virt_ep *virt_ep = container_of(_ep, struct pxa27x_virt_ep, usb_ep);
-+ struct pxa27x_ep *ep = virt_ep->pxa_ep;
-+ unsigned long flags;
-+
-+ DMSG("%s is called\n", __FUNCTION__);
-+ if (unlikely (!_ep || (!ep->desc && _ep->name != ep0name))
-+ || ep->ep_type == USB_ENDPOINT_XFER_ISOC) {
-+ DMSG("%s, bad ep\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+ if (value == 0) {
-+ /* this path (reset toggle+halt) is needed to implement
-+ * SET_INTERFACE on normal hardware. but it can't be
-+ * done from software on the PXA UDC, and the hardware
-+ * forgets to do it as part of SET_INTERFACE automagic.
-+ */
-+ DMSG("only host can clear %s halt\n", _ep->name);
-+ return -EROFS;
-+ }
-+
-+ local_irq_save(flags);
-+
-+ if (ep->dir_in && ((*ep->reg_udccsr & UDCCSR_FS) == 0
-+ || !list_empty(&ep->queue))) {
-+ local_irq_restore(flags);
-+ return -EAGAIN;
-+ }
-+
-+ /* FST bit is the same for control, bulk in, bulk out, interrupt in */
-+ *ep->reg_udccsr = UDCCSR_FST|UDCCSR_FEF;
-+
-+ /* ep0 needs special care */
-+ if (!ep->desc) {
-+ start_watchdog(ep->dev);
-+ ep->dev->req_pending = 0;
-+ ep->dev->ep0state = EP0_STALL;
-+
-+ /* and bulk/intr endpoints like dropping stalls too */
-+ } else {
-+ unsigned i;
-+ for (i = 0; i < 1000; i += 20) {
-+ if (*ep->reg_udccsr & UDCCSR_SST)
-+ break;
-+ udelay(20);
-+ }
-+ }
-+ local_irq_restore(flags);
-+
-+ DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
-+ return 0;
-+}
-+
-+static int pxa27x_ep_fifo_status(struct usb_ep *_ep)
-+{
-+ struct pxa27x_virt_ep *virt_ep = container_of(_ep, struct pxa27x_virt_ep, usb_ep);
-+ struct pxa27x_ep *ep = virt_ep->pxa_ep;
-+
-+ if (!_ep) {
-+ DMSG("%s, bad ep\n", __FUNCTION__);
-+ return -ENODEV;
-+ }
-+ /* pxa can't report unclaimed bytes from IN fifos */
-+ if (ep->dir_in)
-+ return -EOPNOTSUPP;
-+ if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
-+ || (*ep->reg_udccsr & UDCCSR_FS) == 0)
-+ return 0;
-+ else
-+ return (*ep->reg_udcbcr & 0xfff) + 1;
-+}
-+
-+static void pxa27x_ep_fifo_flush(struct usb_ep *_ep)
-+{
-+ struct pxa27x_virt_ep *virt_ep = container_of(_ep, struct pxa27x_virt_ep, usb_ep);
-+ struct pxa27x_ep *ep = virt_ep->pxa_ep;
-+
-+ DMSG("pxa27x_ep_fifo_flush\n");
-+
-+ if (!_ep || _ep->name == ep0name || !list_empty(&ep->queue)) {
-+ DMSG("%s, bad ep\n", __FUNCTION__);
-+ return;
-+ }
-+
-+ /* toggle and halt bits stay unchanged */
-+
-+ /* for OUT, just read and discard the FIFO contents. */
-+ if (!ep->dir_in) {
-+ while (((*ep->reg_udccsr) & UDCCSR_BNE) != 0)
-+ (void) *ep->reg_udcdr;
-+ return;
-+ }
-+
-+ /* most IN status is the same, but ISO can't stall */
-+ *ep->reg_udccsr = UDCCSR_PC|UDCCSR_FST|UDCCSR_TRN
-+ | (ep->ep_type == USB_ENDPOINT_XFER_ISOC)
-+ ? 0 : UDCCSR_SST;
-+}
-+
-+
-+static struct usb_ep_ops pxa27x_ep_ops = {
-+ .enable = pxa27x_ep_enable,
-+ .disable = pxa27x_ep_disable,
-+
-+ .alloc_request = pxa27x_ep_alloc_request,
-+ .free_request = pxa27x_ep_free_request,
-+
-+ .queue = pxa27x_ep_queue,
-+ .dequeue = pxa27x_ep_dequeue,
-+
-+ .set_halt = pxa27x_ep_set_halt,
-+ .fifo_status = pxa27x_ep_fifo_status,
-+ .fifo_flush = pxa27x_ep_fifo_flush,
-+};
-+
-+
-+/* ---------------------------------------------------------------------------
-+ * device-scoped parts of the api to the usb controller hardware
-+ * ---------------------------------------------------------------------------
-+ */
-+
-+static inline unsigned int validate_fifo_size(u8 bmAttributes)
-+{
-+ switch (bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_CONTROL:
-+ return EP0_FIFO_SIZE;
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ return ISO_FIFO_SIZE;
-+ break;
-+ case USB_ENDPOINT_XFER_BULK:
-+ return BULK_FIFO_SIZE;
-+ break;
-+ case USB_ENDPOINT_XFER_INT:
-+ return INT_FIFO_SIZE;
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+static void pxa27x_ep_free(struct usb_gadget *gadget, struct usb_ep *_ep)
-+{
-+ struct pxa27x_udc *dev = the_controller;
-+ struct pxa27x_virt_ep *virt_ep;
-+ int i;
-+
-+ virt_ep = container_of(_ep, struct pxa27x_virt_ep, usb_ep);
-+
-+ for (i = 1; i < UDC_EP_NUM; i++) {
-+ if (dev->ep[i].usb_ep == &virt_ep->usb_ep) {
-+ if (dev->ep[i].desc) {
-+ virt_ep->pxa_ep = &dev->ep[i];
-+ pxa27x_ep_disable(&virt_ep->usb_ep);
-+ }
-+ dev->ep[i].usb_ep = NULL;
-+ }
-+ }
-+
-+ if (!list_empty(&virt_ep->usb_ep.ep_list))
-+ list_del_init(&virt_ep->usb_ep.ep_list);
-+
-+ kfree(virt_ep->usb_ep.name);
-+ kfree(virt_ep);
-+}
-+
-+static void pxa27x_ep_freeall(struct usb_gadget *gadget)
-+{
-+ struct pxa27x_udc *dev = the_controller;
-+ int i;
-+
-+ for (i = 1; i < UDC_EP_NUM; i++) {
-+ if(dev->ep[i].usb_ep)
-+ pxa27x_ep_free(gadget, dev->ep[i].usb_ep);
-+ }
-+}
-+
-+#define NAME_SIZE 18
-+
-+static int pxa27x_find_free_ep(struct pxa27x_udc *dev)
-+{
-+ int i;
-+ for (i = 1; i < UDC_EP_NUM; i++) {
-+ if(!dev->ep[i].assigned)
-+ return i;
-+ }
-+ return -1;
-+}
-+
-+/*
-+ * Endpoint Allocation/Configuration
-+ *
-+ * pxa27x endpoint configuration is fixed when the device is enabled. Any pxa
-+ * endpoint is only active in one configuration, interface and alternate
-+ * interface combination so to support gadget drivers, we map one usb_ep to
-+ * one of several pxa ep's. One pxa endpoint is assigned per configuration
-+ * combination.
-+ */
-+static struct usb_ep* pxa27x_ep_alloc(struct usb_gadget *gadget, struct usb_endpoint_descriptor *desc,
-+ struct usb_endpoint_config *epconfig, int configs)
-+{
-+ struct pxa27x_udc *dev = the_controller;
-+ struct pxa27x_virt_ep *virt_ep;
-+ unsigned int i, fifo_size;
-+ char *name;
-+
-+ if (unlikely(configs < 1)) {
-+ dev_err(dev->dev, "%s: Error in config data\n", __FUNCTION__);
-+ return NULL;
-+ }
-+
-+ virt_ep = kmalloc(sizeof(struct pxa27x_virt_ep), GFP_KERNEL);
-+ name = kmalloc(NAME_SIZE, GFP_KERNEL);
-+ if (!virt_ep || !name) {
-+ dev_err(dev->dev, "%s: -ENOMEM\n", __FUNCTION__);
-+ kfree(name);
-+ kfree(virt_ep);
-+ return NULL;
-+ }
-+
-+ if (!(desc->wMaxPacketSize)) {
-+ fifo_size = validate_fifo_size(desc->bmAttributes);
-+ desc->wMaxPacketSize = fifo_size;
-+ } else {
-+ fifo_size = desc->wMaxPacketSize;
-+ }
-+
-+ DMSG("pxa27x_ep_alloc: bLength: %d, bDescriptorType: %x, bEndpointAddress: %x,\n"
-+ " bmAttributes: %x, wMaxPacketSize: %d\n", desc->bLength,
-+ desc->bDescriptorType, desc->bEndpointAddress, desc->bmAttributes,
-+ desc->wMaxPacketSize);
-+
-+ if (!(desc->bEndpointAddress & 0xF))
-+ desc->bEndpointAddress |= dev->ep_num;
-+
-+ for (i = 0; i < configs; i++)
-+ {
-+ struct pxa27x_ep *pxa_ep;
-+ int j;
-+
-+ DMSG("pxa27x_ep_alloc: config: %d, interface: %d, altinterface: %x,\n",
-+ epconfig->config, epconfig->interface, epconfig->altinterface);
-+
-+ j = pxa27x_find_free_ep(dev);
-+
-+ if (unlikely(j < 0)) {
-+ dev_err(dev->dev, "pxa27x_ep_alloc: Failed to find a spare endpoint\n");
-+ pxa27x_ep_free(gadget, &virt_ep->usb_ep);
-+ return NULL;
-+ }
-+
-+ pxa_ep = &dev->ep[j];
-+
-+ if (i == 0)
-+ virt_ep->pxa_ep = pxa_ep;
-+
-+ pxa_ep->assigned = 1;
-+ pxa_ep->ep_num = dev->ep_num;
-+ pxa_ep->pxa_ep_num = j;
-+ pxa_ep->usb_ep = &virt_ep->usb_ep;
-+ pxa_ep->dev = dev;
-+ pxa_ep->desc = desc;
-+ pxa_ep->pio_irqs = pxa_ep->dma_irqs = 0;
-+ pxa_ep->dma = -1;
-+
-+ pxa_ep->fifo_size = fifo_size;
-+ pxa_ep->dir_in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0;
-+ pxa_ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-+ pxa_ep->stopped = 1;
-+ pxa_ep->dma_con = 0;
-+ pxa_ep->config = epconfig->config;
-+ pxa_ep->interface = epconfig->interface;
-+ pxa_ep->aisn = epconfig->altinterface;
-+
-+ pxa_ep->reg_udccsr = &UDCCSR0 + j;
-+ pxa_ep->reg_udcbcr = &UDCBCR0 + j;
-+ pxa_ep->reg_udcdr = &UDCDR0 + j ;
-+ pxa_ep->reg_udccr = &UDCCRA - 1 + j;
-+#ifdef USE_DMA
-+ pxa_ep->reg_drcmr = &DRCMR24 + j;
-+#endif
-+
-+ /* Configure UDCCR */
-+ *pxa_ep->reg_udccr = ((pxa_ep->config << UDCCONR_CN_S) & UDCCONR_CN)
-+ | ((pxa_ep->interface << UDCCONR_IN_S) & UDCCONR_IN)
-+ | ((pxa_ep->aisn << UDCCONR_AISN_S) & UDCCONR_AISN)
-+ | ((dev->ep_num << UDCCONR_EN_S) & UDCCONR_EN)
-+ | ((pxa_ep->ep_type << UDCCONR_ET_S) & UDCCONR_ET)
-+ | ((pxa_ep->dir_in) ? UDCCONR_ED : 0)
-+ | ((min(pxa_ep->fifo_size, (unsigned)desc->wMaxPacketSize) << UDCCONR_MPS_S ) & UDCCONR_MPS)
-+ | UDCCONR_EE;
-+// | UDCCONR_DE | UDCCONR_EE;
-+
-+
-+
-+#ifdef USE_DMA
-+ /* Only BULK use DMA */
-+ if ((pxa_ep->ep_type & USB_ENDPOINT_XFERTYPE_MASK)\
-+ == USB_ENDPOINT_XFER_BULK)
-+ *pxa_ep->reg_udccsr = UDCCSR_DME;
-+#endif
-+
-+ DMSG("UDCCR: 0x%p is 0x%x\n", pxa_ep->reg_udccr,*pxa_ep->reg_udccr);
-+
-+ epconfig++;
-+ }
-+
-+ /* Fill ep name*/
-+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_BULK:
-+ sprintf(name, "ep%d%s-bulk", dev->ep_num,
-+ ((desc->bEndpointAddress & USB_DIR_IN) ? "in":"out"));
-+ break;
-+ case USB_ENDPOINT_XFER_INT:
-+ sprintf(name, "ep%d%s-intr", dev->ep_num,
-+ ((desc->bEndpointAddress & USB_DIR_IN) ? "in":"out"));
-+ break;
-+ default:
-+ sprintf(name, "ep%d%s", dev->ep_num,
-+ ((desc->bEndpointAddress & USB_DIR_IN) ? "in":"out"));
-+ break;
-+ }
-+
-+ virt_ep->desc = desc;
-+ virt_ep->usb_ep.name = name;
-+ virt_ep->usb_ep.ops = &pxa27x_ep_ops;
-+ virt_ep->usb_ep.maxpacket = min((ushort)fifo_size, desc->wMaxPacketSize);
-+
-+ list_add_tail(&virt_ep->usb_ep.ep_list, &gadget->ep_list);
-+
-+ dev->ep_num++;
-+ return &virt_ep->usb_ep;
-+}
-+
-+static int pxa27x_udc_get_frame(struct usb_gadget *_gadget)
-+{
-+ return (UDCFNR & 0x7FF);
-+}
-+
-+static int pxa27x_udc_wakeup(struct usb_gadget *_gadget)
-+{
-+ /* host may not have enabled remote wakeup */
-+ if ((UDCCR & UDCCR_DWRE) == 0)
-+ return -EHOSTUNREACH;
-+ udc_set_mask_UDCCR(UDCCR_UDR);
-+ return 0;
-+}
-+
-+static const struct usb_gadget_ops pxa27x_udc_ops = {
-+ .ep_alloc = pxa27x_ep_alloc,
-+ .get_frame = pxa27x_udc_get_frame,
-+ .wakeup = pxa27x_udc_wakeup,
-+ // current versions must always be self-powered
-+};
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#ifdef UDC_PROC_FILE
-+
-+static const char proc_node_name [] = "driver/udc";
-+
-+static int
-+udc_proc_read(char *page, char **start, off_t off, int count,
-+ int *eof, void *_dev)
-+{
-+ char *buf = page;
-+ struct pxa27x_udc *dev = _dev;
-+ char *next = buf;
-+ unsigned size = count;
-+ unsigned long flags;
-+ int i, t;
-+ u32 tmp;
-+
-+ if (off != 0)
-+ return 0;
-+
-+ local_irq_save(flags);
-+
-+ /* basic device status */
-+ t = scnprintf(next, size, DRIVER_DESC "\n"
-+ "%s version: %s\nGadget driver: %s\n",
-+ driver_name, DRIVER_VERSION DMASTR,
-+ dev->driver ? dev->driver->driver.name : "(none)");
-+ size -= t;
-+ next += t;
-+
-+ /* registers for device and ep0 */
-+ t = scnprintf(next, size,
-+ "uicr %02X.%02X, usir %02X.%02x, ufnr %02X\n",
-+ UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR);
-+ size -= t;
-+ next += t;
-+
-+ tmp = UDCCR;
-+ t = scnprintf(next, size,"udccr %02X =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n", tmp,
-+ (tmp & UDCCR_OEN) ? " oen":"",
-+ (tmp & UDCCR_AALTHNP) ? " aalthnp":"",
-+ (tmp & UDCCR_AHNP) ? " rem" : "",
-+ (tmp & UDCCR_BHNP) ? " rstir" : "",
-+ (tmp & UDCCR_DWRE) ? " dwre" : "",
-+ (tmp & UDCCR_SMAC) ? " smac" : "",
-+ (tmp & UDCCR_EMCE) ? " emce" : "",
-+ (tmp & UDCCR_UDR) ? " udr" : "",
-+ (tmp & UDCCR_UDA) ? " uda" : "",
-+ (tmp & UDCCR_UDE) ? " ude" : "",
-+ (tmp & UDCCR_ACN) >> UDCCR_ACN_S,
-+ (tmp & UDCCR_AIN) >> UDCCR_AIN_S,
-+ (tmp & UDCCR_AAISN)>> UDCCR_AAISN_S );
-+
-+ size -= t;
-+ next += t;
-+
-+ tmp = UDCCSR0;
-+ t = scnprintf(next, size,
-+ "udccsr0 %02X =%s%s%s%s%s%s%s\n", tmp,
-+ (tmp & UDCCSR0_SA) ? " sa" : "",
-+ (tmp & UDCCSR0_RNE) ? " rne" : "",
-+ (tmp & UDCCSR0_FST) ? " fst" : "",
-+ (tmp & UDCCSR0_SST) ? " sst" : "",
-+ (tmp & UDCCSR0_DME) ? " dme" : "",
-+ (tmp & UDCCSR0_IPR) ? " ipr" : "",
-+ (tmp & UDCCSR0_OPC) ? " opc" : "");
-+ size -= t;
-+ next += t;
-+
-+ if (!dev->driver)
-+ goto done;
-+
-+ t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
-+ dev->stats.write.bytes, dev->stats.write.ops,
-+ dev->stats.read.bytes, dev->stats.read.ops,
-+ dev->stats.irqs);
-+ size -= t;
-+ next += t;
-+
-+ /* dump endpoint queues */
-+ for (i = 0; i < UDC_EP_NUM; i++) {
-+ struct pxa27x_ep *ep = &dev->ep [i];
-+ struct pxa27x_request *req;
-+ int t;
-+
-+ if (i != 0) {
-+ const struct usb_endpoint_descriptor *d;
-+
-+ d = ep->desc;
-+ if (!d)
-+ continue;
-+ tmp = *dev->ep [i].reg_udccsr;
-+ t = scnprintf(next, size,
-+ "%d max %d %s udccs %02x udccr:0x%x\n",
-+ i, le16_to_cpu (d->wMaxPacketSize),
-+ (ep->dma >= 0) ? "dma" : "pio", tmp,
-+ *dev->ep[i].reg_udccr);
-+ /* TODO translate all five groups of udccs bits! */
-+
-+ } else /* ep0 should only have one transfer queued */
-+ t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n",
-+ ep->pio_irqs);
-+ if (t <= 0 || t > size)
-+ goto done;
-+ size -= t;
-+ next += t;
-+
-+ if (list_empty(&ep->queue)) {
-+ t = scnprintf(next, size, "\t(nothing queued)\n");
-+ if (t <= 0 || t > size)
-+ goto done;
-+ size -= t;
-+ next += t;
-+ continue;
-+ }
-+ list_for_each_entry(req, &ep->queue, queue) {
-+#ifdef USE_DMA
-+ if (ep->dma >= 0 && req->queue.prev == &ep->queue)
-+ t = scnprintf(next, size, "\treq %p len %d/%d "
-+ "buf %p (dma%d dcmd %08x)\n",
-+ &req->req, req->req.actual,
-+ req->req.length, req->req.buf,
-+ ep->dma, DCMD(ep->dma)
-+ /* low 13 bits == bytes-to-go */);
-+ else
-+#endif
-+ t = scnprintf(next, size,
-+ "\treq %p len %d/%d buf %p\n",
-+ &req->req, req->req.actual,
-+ req->req.length, req->req.buf);
-+ if (t <= 0 || t > size)
-+ goto done;
-+ size -= t;
-+ next += t;
-+ }
-+ }
-+
-+done:
-+ local_irq_restore(flags);
-+ *eof = 1;
-+ return count - size;
-+}
-+
-+#define create_proc_files() \
-+ create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
-+#define remove_proc_files() \
-+ remove_proc_entry(proc_node_name, NULL)
-+
-+#else /* !UDC_PROC_FILE */
-+#define create_proc_files() do {} while (0)
-+#define remove_proc_files() do {} while (0)
-+
-+#endif /* UDC_PROC_FILE */
-+
-+/* "function" sysfs attribute */
-+static ssize_t show_function(struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+ struct pxa27x_udc *dev = dev_get_drvdata(_dev);
-+
-+ if (!dev->driver || !dev->driver->function
-+ || strlen(dev->driver->function) > PAGE_SIZE)
-+ return 0;
-+ return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
-+}
-+static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * udc_disable - disable USB device controller
-+ */
-+static void udc_disable(struct pxa27x_udc *dev)
-+{
-+ UDCICR0 = UDCICR1 = 0x00000000;
-+
-+ udc_clear_mask_UDCCR(UDCCR_UDE);
-+
-+ /* Disable clock for USB device */
-+ pxa_set_cken(CKEN_USB, 0);
-+
-+ ep0_idle(dev);
-+ dev->gadget.speed = USB_SPEED_UNKNOWN;
-+ dev->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
-+}
-+
-+
-+/*
-+ * udc_reinit - initialize software state
-+ */
-+static void udc_reinit(struct pxa27x_udc *dev)
-+{
-+ u32 i;
-+
-+ dev->ep0state = EP0_IDLE;
-+
-+ /* basic endpoint records init */
-+ for (i = 0; i < UDC_EP_NUM; i++) {
-+ struct pxa27x_ep *ep = &dev->ep[i];
-+
-+ ep->stopped = 0;
-+ ep->pio_irqs = ep->dma_irqs = 0;
-+ }
-+ dev->configuration = 0;
-+ dev->interface = 0;
-+ dev->alternate = 0;
-+ /* the rest was statically initialized, and is read-only */
-+}
-+
-+/* until it's enabled, this UDC should be completely invisible
-+ * to any USB host.
-+ */
-+static void udc_enable(struct pxa27x_udc *dev)
-+{
-+ udc_clear_mask_UDCCR(UDCCR_UDE);
-+
-+ /* Enable clock for USB device */
-+ pxa_set_cken(CKEN_USB, 1);
-+
-+ UDCICR0 = UDCICR1 = 0;
-+
-+ ep0_idle(dev);
-+ dev->gadget.speed = USB_SPEED_FULL;
-+ dev->stats.irqs = 0;
-+
-+ udc_set_mask_UDCCR(UDCCR_UDE);
-+ udelay(2);
-+ if (UDCCR & UDCCR_EMCE)
-+ dev_err(dev->dev, "There are error in configuration, udc disabled\n");
-+
-+ /* caller must be able to sleep in order to cope
-+ * with startup transients.
-+ */
-+ msleep(100);
-+
-+ /* enable suspend/resume and reset irqs */
-+ UDCICR1 = UDCICR1_IECC | UDCICR1_IERU | UDCICR1_IESU | UDCICR1_IERS;
-+
-+ /* enable ep0 irqs */
-+ UDCICR0 = UDCICR_INT(0,UDCICR_INT_MASK);
-+
-+ DMSG("Connecting\n");
-+ /* RPFIXME */
-+ UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-+ //dev->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
-+}
-+
-+
-+/* when a driver is successfully registered, it will receive
-+ * control requests including set_configuration(), which enables
-+ * non-control requests. then usb traffic follows until a
-+ * disconnect is reported. then a host may connect again, or
-+ * the driver might get unbound.
-+ */
-+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-+{
-+ struct pxa27x_udc *dev = the_controller;
-+ int retval;
-+
-+ if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind
-+ || !driver->unbind || !driver->disconnect || !driver->setup)
-+ return -EINVAL;
-+ if (!dev)
-+ return -ENODEV;
-+ if (dev->driver)
-+ return -EBUSY;
-+
-+ udc_disable(dev);
-+ udc_init_ep(dev);
-+ udc_reinit(dev);
-+
-+ /* first hook up the driver ... */
-+ dev->driver = driver;
-+ dev->gadget.dev.driver = &driver->driver;
-+ dev->ep_num = 1;
-+
-+ retval = device_add(&dev->gadget.dev);
-+ if (retval) {
-+ DMSG("device_add error %d\n", retval);
-+ goto add_fail;
-+ }
-+ retval = driver->bind(&dev->gadget);
-+ if (retval) {
-+ DMSG("bind to driver %s --> error %d\n",
-+ driver->driver.name, retval);
-+ goto bind_fail;
-+ }
-+ retval = device_create_file(dev->dev, &dev_attr_function);
-+ if (retval) {
-+ DMSG("device_create_file failed: %d\n", retval);
-+ goto create_file_fail;
-+ }
-+
-+ /* ... then enable host detection and ep0; and we're ready
-+ * for set_configuration as well as eventual disconnect.
-+ * NOTE: this shouldn't power up until later.
-+ */
-+ DMSG("registered gadget driver '%s'\n", driver->driver.name);
-+ udc_enable(dev);
-+ dump_state(dev);
-+ return 0;
-+
-+create_file_fail:
-+ driver->unbind(&dev->gadget);
-+bind_fail:
-+ device_del(&dev->gadget.dev);
-+add_fail:
-+ dev->driver = 0;
-+ dev->gadget.dev.driver = 0;
-+ return retval;
-+}
-+EXPORT_SYMBOL(usb_gadget_register_driver);
-+
-+static void
-+stop_activity(struct pxa27x_udc *dev, struct usb_gadget_driver *driver)
-+{
-+ int i;
-+
-+ DMSG("Trace path 1\n");
-+ /* don't disconnect drivers more than once */
-+ if (dev->gadget.speed == USB_SPEED_UNKNOWN)
-+ driver = 0;
-+ dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ /* prevent new request submissions, kill any outstanding requests */
-+ for (i = 0; i < UDC_EP_NUM; i++) {
-+ struct pxa27x_ep *ep = &dev->ep[i];
-+
-+ ep->stopped = 1;
-+ nuke(ep, -ESHUTDOWN);
-+ }
-+ del_timer_sync(&dev->timer);
-+
-+ /* report disconnect; the driver is already quiesced */
-+ if (driver)
-+ driver->disconnect(&dev->gadget);
-+
-+ /* re-init driver-visible data structures */
-+ udc_reinit(dev);
-+}
-+
-+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-+{
-+ struct pxa27x_udc *dev = the_controller;
-+
-+ if (!dev)
-+ return -ENODEV;
-+ if (!driver || driver != dev->driver)
-+ return -EINVAL;
-+
-+ local_irq_disable();
-+ udc_disable(dev);
-+ stop_activity(dev, driver);
-+ local_irq_enable();
-+
-+ driver->unbind(&dev->gadget);
-+ pxa27x_ep_freeall(&dev->gadget);
-+ dev->driver = 0;
-+
-+ device_del(&dev->gadget.dev);
-+ device_remove_file(dev->dev, &dev_attr_function);
-+
-+ DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
-+ dump_state(dev);
-+ return 0;
-+}
-+EXPORT_SYMBOL(usb_gadget_unregister_driver);
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static inline void clear_ep_state(struct pxa27x_udc *dev)
-+{
-+ unsigned i;
-+
-+ /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
-+ * fifos, and pending transactions mustn't be continued in any case.
-+ */
-+ for (i = 1; i < UDC_EP_NUM; i++)
-+ nuke(&dev->ep[i], -ECONNABORTED);
-+}
-+
-+static void udc_watchdog(unsigned long _dev)
-+{
-+ struct pxa27x_udc *dev = (void *)_dev;
-+
-+ local_irq_disable();
-+ if (dev->ep0state == EP0_STALL
-+ && (UDCCSR0 & UDCCSR0_FST) == 0
-+ && (UDCCSR0 & UDCCSR0_SST) == 0) {
-+ UDCCSR0 = UDCCSR0_FST|UDCCSR0_FTF;
-+ DBG(DBG_VERBOSE, "ep0 re-stall\n");
-+ start_watchdog(dev);
-+ }
-+ local_irq_enable();
-+}
-+
-+static void handle_ep0(struct pxa27x_udc *dev)
-+{
-+ u32 udccsr0 = UDCCSR0;
-+ struct pxa27x_ep *ep = &dev->ep[0];
-+ struct pxa27x_request *req;
-+ union {
-+ struct usb_ctrlrequest r;
-+ u8 raw[8];
-+ u32 word[2];
-+ } u;
-+
-+ if (list_empty(&ep->queue))
-+ req = 0;
-+ else
-+ req = list_entry(ep->queue.next, struct pxa27x_request, queue);
-+
-+ /* clear stall status */
-+ if (udccsr0 & UDCCSR0_SST) {
-+ nuke(ep, -EPIPE);
-+ UDCCSR0 = UDCCSR0_SST;
-+ del_timer(&dev->timer);
-+ ep0_idle(dev);
-+ }
-+
-+ /* previous request unfinished? non-error iff back-to-back ... */
-+ if ((udccsr0 & UDCCSR0_SA) != 0 && dev->ep0state != EP0_IDLE) {
-+ nuke(ep, 0);
-+ del_timer(&dev->timer);
-+ ep0_idle(dev);
-+ }
-+
-+ switch (dev->ep0state) {
-+ case EP0_NO_ACTION:
-+ dev_info(dev->dev, "%s: Busy\n", __FUNCTION__);
-+ /*Fall through */
-+ case EP0_IDLE:
-+ /* late-breaking status? */
-+ udccsr0 = UDCCSR0;
-+
-+ /* start control request? */
-+ if (likely((udccsr0 & (UDCCSR0_OPC|UDCCSR0_SA|UDCCSR0_RNE))
-+ == (UDCCSR0_OPC|UDCCSR0_SA|UDCCSR0_RNE))) {
-+ int i;
-+
-+ nuke(ep, -EPROTO);
-+ /* read SETUP packet */
-+ for (i = 0; i < 2; i++) {
-+ if (unlikely(!(UDCCSR0 & UDCCSR0_RNE))) {
-+bad_setup:
-+ DMSG("SETUP %d!\n", i);
-+ goto stall;
-+ }
-+ u.word [i] = UDCDR0;
-+ }
-+ if (unlikely((UDCCSR0 & UDCCSR0_RNE) != 0))
-+ goto bad_setup;
-+
-+ le16_to_cpus(&u.r.wValue);
-+ le16_to_cpus(&u.r.wIndex);
-+ le16_to_cpus(&u.r.wLength);
-+
-+ DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n",
-+ u.r.bRequestType, u.r.bRequest,
-+ u.r.wValue, u.r.wIndex, u.r.wLength);
-+ /* cope with automagic for some standard requests. */
-+ dev->req_std = (u.r.bRequestType & USB_TYPE_MASK)
-+ == USB_TYPE_STANDARD;
-+ dev->req_config = 0;
-+ dev->req_pending = 1;
-+#if 0
-+ switch (u.r.bRequest) {
-+ /* hardware was supposed to hide this */
-+ case USB_REQ_SET_CONFIGURATION:
-+ case USB_REQ_SET_INTERFACE:
-+ case USB_REQ_SET_ADDRESS:
-+ dev_err(dev->dev, "Should not come here\n");
-+ break;
-+ }
-+
-+#endif
-+ if (u.r.bRequestType & USB_DIR_IN)
-+ dev->ep0state = EP0_IN_DATA_PHASE;
-+ else
-+ dev->ep0state = EP0_OUT_DATA_PHASE;
-+ i = dev->driver->setup(&dev->gadget, &u.r);
-+
-+ if (i < 0) {
-+ /* hardware automagic preventing STALL... */
-+ if (dev->req_config) {
-+ /* hardware sometimes neglects to tell
-+ * tell us about config change events,
-+ * so later ones may fail...
-+ */
-+ WARN("config change %02x fail %d?\n",
-+ u.r.bRequest, i);
-+ return;
-+ /* TODO experiment: if has_cfr,
-+ * hardware didn't ACK; maybe we
-+ * could actually STALL!
-+ */
-+ }
-+ DBG(DBG_VERBOSE, "protocol STALL, "
-+ "%02x err %d\n", UDCCSR0, i);
-+stall:
-+ /* the watchdog timer helps deal with cases
-+ * where udc seems to clear FST wrongly, and
-+ * then NAKs instead of STALLing.
-+ */
-+ ep0start(dev, UDCCSR0_FST|UDCCSR0_FTF, "stall");
-+ start_watchdog(dev);
-+ dev->ep0state = EP0_STALL;
-+
-+ /* deferred i/o == no response yet */
-+ } else if (dev->req_pending) {
-+ if (likely(dev->ep0state == EP0_IN_DATA_PHASE
-+ || dev->req_std || u.r.wLength))
-+ ep0start(dev, 0, "defer");
-+ else
-+ ep0start(dev, UDCCSR0_IPR, "defer/IPR");
-+ }
-+
-+ /* expect at least one data or status stage irq */
-+ return;
-+
-+ } else {
-+ /* some random early IRQ:
-+ * - we acked FST
-+ * - IPR cleared
-+ * - OPC got set, without SA (likely status stage)
-+ */
-+ UDCCSR0 = udccsr0 & (UDCCSR0_SA|UDCCSR0_OPC);
-+ }
-+ break;
-+ case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */
-+ if (udccsr0 & UDCCSR0_OPC) {
-+ UDCCSR0 = UDCCSR0_OPC|UDCCSR0_FTF;
-+ DBG(DBG_VERBOSE, "ep0in premature status\n");
-+ if (req)
-+ done(ep, req, 0);
-+ ep0_idle(dev);
-+ } else /* irq was IPR clearing */ {
-+ if (req) {
-+ /* this IN packet might finish the request */
-+ (void) write_ep0_fifo(ep, req);
-+ } /* else IN token before response was written */
-+ }
-+ break;
-+ case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */
-+ if (udccsr0 & UDCCSR0_OPC) {
-+ if (req) {
-+ /* this OUT packet might finish the request */
-+ if (read_ep0_fifo(ep, req))
-+ done(ep, req, 0);
-+ /* else more OUT packets expected */
-+ } /* else OUT token before read was issued */
-+ } else /* irq was IPR clearing */ {
-+ DBG(DBG_VERBOSE, "ep0out premature status\n");
-+ if (req)
-+ done(ep, req, 0);
-+ ep0_idle(dev);
-+ }
-+ break;
-+ case EP0_STALL:
-+ UDCCSR0 = UDCCSR0_FST;
-+ break;
-+ }
-+ UDCISR0 = UDCISR_INT(0, UDCISR_INT_MASK);
-+}
-+
-+
-+static void handle_ep(struct pxa27x_ep *ep)
-+{
-+ struct pxa27x_request *req;
-+ int completed;
-+ u32 udccsr=0;
-+
-+ DMSG("%s is called\n", __FUNCTION__);
-+ do {
-+ completed = 0;
-+ if (likely (!list_empty(&ep->queue))) {
-+ req = list_entry(ep->queue.next,
-+ struct pxa27x_request, queue);
-+ } else
-+ req = 0;
-+
-+// udccsr = *ep->reg_udccsr;
-+ DMSG("%s: req:%p, udcisr0:0x%x udccsr %p:0x%x\n", __FUNCTION__,
-+ req, UDCISR0, ep->reg_udccsr, *ep->reg_udccsr);
-+ if (unlikely(ep->dir_in)) {
-+ udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr;
-+ if (unlikely (udccsr))
-+ *ep->reg_udccsr = udccsr;
-+
-+ if (req && likely ((*ep->reg_udccsr & UDCCSR_FS) != 0))
-+ completed = write_fifo(ep, req);
-+
-+ } else {
-+ udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr;
-+ if (unlikely(udccsr))
-+ *ep->reg_udccsr = udccsr;
-+
-+ /* fifos can hold packets, ready for reading... */
-+ if (likely(req)) {
-+ completed = read_fifo(ep, req);
-+ } else {
-+ pio_irq_disable (ep->pxa_ep_num);
-+ //*ep->reg_udccsr = UDCCSR_FEF;
-+ DMSG("%s: no req for out data\n",
-+ __FUNCTION__);
-+ }
-+ }
-+ ep->pio_irqs++;
-+ } while (completed);
-+}
-+
-+static void pxa27x_update_eps(struct pxa27x_udc *dev)
-+{
-+ struct pxa27x_virt_ep *virt_ep;
-+ int i;
-+
-+ for (i = 1; i < UDC_EP_NUM; i++) {
-+ if(!dev->ep[i].assigned || !dev->ep[i].usb_ep)
-+ continue;
-+ virt_ep = container_of(dev->ep[i].usb_ep, struct pxa27x_virt_ep, usb_ep);
-+
-+ DMSG("%s, Updating eps %d:%d, %d:%d, %d:%d, %p,%p\n", __FUNCTION__, dev->ep[i].config, dev->configuration
-+ ,dev->ep[i].interface, dev->interface, dev->ep[i].aisn, dev->alternate, virt_ep->pxa_ep, &dev->ep[i]);
-+
-+ if(dev->ep[i].config == dev->configuration && virt_ep->pxa_ep != &dev->ep[i]) {
-+ if ((dev->ep[i].interface == dev->interface &&
-+ dev->ep[i].aisn == dev->alternate) || virt_ep->pxa_ep->config != dev->configuration) {
-+
-+ if (virt_ep->pxa_ep->desc) {
-+ DMSG("%s, Changing end point to %d (en/dis)\n", __FUNCTION__, i);
-+ pxa27x_ep_disable(&virt_ep->usb_ep);
-+ virt_ep->pxa_ep = &dev->ep[i];
-+ pxa27x_ep_enable(&virt_ep->usb_ep, virt_ep->desc);
-+ } else {
-+ DMSG("%s, Changing end point to %d (no en/dis)\n", __FUNCTION__, i);
-+ virt_ep->pxa_ep = &dev->ep[i];
-+ }
-+ }
-+ }
-+ }
-+}
-+
-+static void pxa27x_change_configuration(struct pxa27x_udc *dev)
-+{
-+ struct usb_ctrlrequest req ;
-+
-+ pxa27x_update_eps(dev);
-+
-+ req.bRequestType = 0;
-+ req.bRequest = USB_REQ_SET_CONFIGURATION;
-+ req.wValue = dev->configuration;
-+ req.wIndex = 0;
-+ req.wLength = 0;
-+
-+ dev->ep0state = EP0_NO_ACTION;
-+ dev->driver->setup(&dev->gadget, &req);
-+}
-+
-+static void pxa27x_change_interface(struct pxa27x_udc *dev)
-+{
-+ struct usb_ctrlrequest req;
-+
-+ pxa27x_update_eps(dev);
-+
-+ req.bRequestType = USB_RECIP_INTERFACE;
-+ req.bRequest = USB_REQ_SET_INTERFACE;
-+ req.wValue = dev->alternate;
-+ req.wIndex = dev->interface;
-+ req.wLength = 0;
-+
-+ dev->ep0state = EP0_NO_ACTION;
-+ dev->driver->setup(&dev->gadget, &req);
-+}
-+
-+/*
-+ * pxa27x_udc_irq - interrupt handler
-+ *
-+ * avoid delays in ep0 processing. the control handshaking isn't always
-+ * under software control (pxa250c0 and the pxa255 are better), and delays
-+ * could cause usb protocol errors.
-+ */
-+static irqreturn_t pxa27x_udc_irq(int irq, void *_dev)
-+{
-+ struct pxa27x_udc *dev = _dev;
-+ int handled;
-+
-+ dev->stats.irqs++;
-+
-+ DBG(DBG_VERBOSE, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, "
-+ "UDCCR:0x%08x\n", UDCISR0, UDCISR1, UDCCR);
-+ do {
-+ u32 udcir = UDCISR1 & 0xF8000000;
-+
-+ handled = 0;
-+
-+ /* SUSpend Interrupt Request */
-+ if (unlikely(udcir & UDCISR1_IRSU)) {
-+ UDCISR1 = UDCISR1_IRSU;
-+ handled = 1;
-+ DBG(DBG_VERBOSE, "USB suspend\n");
-+ if (dev->gadget.speed != USB_SPEED_UNKNOWN
-+ && dev->driver
-+ && dev->driver->suspend)
-+ dev->driver->suspend(&dev->gadget);
-+ ep0_idle(dev);
-+ }
-+
-+ /* RESume Interrupt Request */
-+ if (unlikely(udcir & UDCISR1_IRRU)) {
-+ UDCISR1 = UDCISR1_IRRU;
-+ handled = 1;
-+ DBG(DBG_VERBOSE, "USB resume\n");
-+
-+ if (dev->gadget.speed != USB_SPEED_UNKNOWN
-+ && dev->driver
-+ && dev->driver->resume)
-+ dev->driver->resume(&dev->gadget);
-+ }
-+
-+ if (unlikely(udcir & UDCISR1_IRCC)) {
-+ unsigned config, interface, alternate;
-+
-+ handled = 1;
-+ DBG(DBG_VERBOSE, "USB SET_CONFIGURATION or "
-+ "SET_INTERFACE command received\n");
-+
-+ config = (UDCCR & UDCCR_ACN) >> UDCCR_ACN_S;
-+
-+ if (dev->configuration != config) {
-+ dev->configuration = config;
-+ pxa27x_change_configuration(dev) ;
-+ }
-+
-+ interface = (UDCCR & UDCCR_AIN) >> UDCCR_AIN_S;
-+ alternate = (UDCCR & UDCCR_AAISN) >> UDCCR_AAISN_S;
-+
-+ if ((dev->interface != interface) || (dev->alternate != alternate)) {
-+ dev->interface = interface;
-+ dev->alternate = alternate;
-+ pxa27x_change_interface(dev);
-+ }
-+
-+ UDCCR |= UDCCR_SMAC;
-+
-+ UDCISR1 = UDCISR1_IRCC;
-+ DMSG("%s: con:%d,inter:%d,alt:%d\n",
-+ __FUNCTION__, config,interface, alternate);
-+ }
-+
-+ /* ReSeT Interrupt Request - USB reset */
-+ if (unlikely(udcir & UDCISR1_IRRS)) {
-+ UDCISR1 = UDCISR1_IRRS;
-+ handled = 1;
-+
-+ if ((UDCCR & UDCCR_UDA) == 0) {
-+ DBG(DBG_VERBOSE, "USB reset start\n");
-+
-+ /* reset driver and endpoints,
-+ * in case that's not yet done
-+ */
-+ stop_activity(dev, dev->driver);
-+ }
-+ INFO("USB reset\n");
-+ dev->gadget.speed = USB_SPEED_FULL;
-+ memset(&dev->stats, 0, sizeof dev->stats);
-+
-+ } else {
-+ u32 udcisr0 = UDCISR0 ;
-+ u32 udcisr1 = UDCISR1 & 0xFFFF;
-+ int i;
-+
-+ if (unlikely (!udcisr0 && !udcisr1))
-+ continue;
-+
-+ DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", udcisr1,udcisr0);
-+
-+ /* control traffic */
-+ if (udcisr0 & UDCISR0_IR0) {
-+ dev->ep[0].pio_irqs++;
-+ handle_ep0(dev);
-+ handled = 1;
-+ }
-+
-+ udcisr0 >>= 2;
-+ /* endpoint data transfers */
-+ for (i = 1; udcisr0!=0 && i < 16; udcisr0>>=2,i++) {
-+ UDCISR0 = UDCISR_INT(i, UDCISR_INT_MASK);
-+
-+ if (udcisr0 & UDC_INT_FIFOERROR)
-+ dev_err(dev->dev, " Endpoint %d Fifo error\n", i);
-+ if (udcisr0 & UDC_INT_PACKETCMP) {
-+ handle_ep(&dev->ep[i]);
-+ handled = 1;
-+ }
-+
-+ }
-+
-+ for (i = 0; udcisr1!=0 && i < 8; udcisr1 >>= 2, i++) {
-+ UDCISR1 = UDCISR_INT(i, UDCISR_INT_MASK);
-+
-+ if (udcisr1 & UDC_INT_FIFOERROR) {
-+ dev_err(dev->dev, "Endpoint %d fifo error\n", (i+16));
-+ }
-+
-+ if (udcisr1 & UDC_INT_PACKETCMP) {
-+ handle_ep(&dev->ep[i+16]);
-+ handled = 1;
-+ }
-+ }
-+ }
-+
-+ /* we could also ask for 1 msec SOF (SIR) interrupts */
-+
-+ } while (handled);
-+ return IRQ_HANDLED;
-+}
-+
-+int write_ep0_zlp(void)
-+{
-+ UDCCSR0 = UDCCSR0_IPR;
-+ return 0;
-+}
-+EXPORT_SYMBOL(write_ep0_zlp);
-+
-+static void udc_init_ep(struct pxa27x_udc *dev)
-+{
-+ int i;
-+
-+ INIT_LIST_HEAD(&dev->gadget.ep_list);
-+ INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
-+
-+ for (i = 0; i < UDC_EP_NUM; i++) {
-+ struct pxa27x_ep *ep = &dev->ep[i];
-+
-+ ep->dma = -1;
-+ if (i != 0) {
-+ memset(ep, 0, sizeof(*ep));
-+ }
-+ INIT_LIST_HEAD(&ep->queue);
-+ }
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void nop_release(struct device *dev)
-+{
-+ DMSG("%s %s\n", __FUNCTION__, dev->bus_id);
-+}
-+
-+/* this uses load-time allocation and initialization (instead of
-+ * doing it at run-time) to save code, eliminate fault paths, and
-+ * be more obviously correct.
-+ */
-+
-+static struct pxa27x_udc memory = {
-+ .gadget = {
-+ .ops = &pxa27x_udc_ops,
-+ .ep0 = &memory.virt_ep0.usb_ep,
-+ .name = driver_name,
-+ .dev = {
-+ .bus_id = "gadget",
-+ .release = nop_release,
-+ },
-+ },
-+
-+ /* control endpoint */
-+ .virt_ep0 = {
-+ .pxa_ep = &memory.ep[0],
-+ .usb_ep = {
-+ .name = ep0name,
-+ .ops = &pxa27x_ep_ops,
-+ .maxpacket = EP0_FIFO_SIZE,
-+ },
-+ },
-+
-+ .ep[0] = {
-+ .usb_ep = &memory.virt_ep0.usb_ep,
-+ .dev = &memory,
-+ .reg_udccsr = &UDCCSR0,
-+ .reg_udcdr = &UDCDR0,
-+ },
-+};
-+
-+static int __init pxa27x_udc_probe(struct platform_device *_dev)
-+{
-+ struct pxa27x_udc *dev = &memory;
-+ int retval;
-+
-+ /* other non-static parts of init */
-+ dev->dev = &_dev->dev;
-+ dev->mach = _dev->dev.platform_data;
-+
-+ /* RPFIXME */
-+ UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-+
-+ init_timer(&dev->timer);
-+ dev->timer.function = udc_watchdog;
-+ dev->timer.data = (unsigned long) dev;
-+
-+ device_initialize(&dev->gadget.dev);
-+ dev->gadget.dev.parent = &_dev->dev;
-+ dev->gadget.dev.dma_mask = _dev->dev.dma_mask;
-+
-+ the_controller = dev;
-+ platform_set_drvdata(_dev, dev);
-+
-+ udc_disable(dev);
-+ udc_init_ep(dev);
-+ udc_reinit(dev);
-+
-+ /* irq setup after old hardware state is cleaned up */
-+ retval = request_irq(IRQ_USB, pxa27x_udc_irq,
-+ SA_INTERRUPT, driver_name, dev);
-+ if (retval != 0) {
-+ dev_err(dev->dev, "%s: can't get irq %i, err %d\n",
-+ driver_name, IRQ_USB, retval);
-+ return -EBUSY;
-+ }
-+ dev->got_irq = 1;
-+
-+ create_proc_files();
-+
-+ return 0;
-+}
-+
-+static int pxa27x_udc_remove(struct platform_device *_dev)
-+{
-+ struct pxa27x_udc *dev = platform_get_drvdata(_dev);
-+
-+ udc_disable(dev);
-+ remove_proc_files();
-+ usb_gadget_unregister_driver(dev->driver);
-+
-+ pxa27x_ep_freeall(&dev->gadget);
-+
-+ if (dev->got_irq) {
-+ free_irq(IRQ_USB, dev);
-+ dev->got_irq = 0;
-+ }
-+ platform_set_drvdata(_dev, 0);
-+ the_controller = 0;
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static void pxa27x_udc_shutdown(struct platform_device *_dev)
-+{
-+ struct pxa27x_udc *dev = platform_get_drvdata(_dev);
-+
-+ udc_disable(dev);
-+}
-+
-+static int pxa27x_udc_suspend(struct platform_device *_dev, pm_message_t state)
-+{
-+ int i;
-+ struct pxa27x_udc *dev = platform_get_drvdata(_dev);
-+
-+ DMSG("%s is called\n", __FUNCTION__);
-+
-+ dev->udccsr0 = UDCCSR0;
-+ for(i=1; (i<UDC_EP_NUM); i++) {
-+ if (dev->ep[i].assigned) {
-+ struct pxa27x_ep *ep = &dev->ep[i];
-+ ep->udccsr_value = *ep->reg_udccsr;
-+ ep->udccr_value = *ep->reg_udccr;
-+ DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n",
-+ i, *ep->reg_udccsr, *ep->reg_udccr);
-+ }
-+ }
-+
-+ udc_clear_mask_UDCCR(UDCCR_UDE);
-+ pxa_set_cken(CKEN_USB, 0);
-+
-+ return 0;
-+}
-+
-+static int pxa27x_udc_resume(struct platform_device *_dev)
-+{
-+ int i;
-+ struct pxa27x_udc *dev = platform_get_drvdata(_dev);
-+
-+ DMSG("%s is called\n", __FUNCTION__);
-+ UDCCSR0 = dev->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME);
-+ for (i=1; i < UDC_EP_NUM; i++) {
-+ if (dev->ep[i].assigned) {
-+ struct pxa27x_ep *ep = &dev->ep[i];
-+ *ep->reg_udccsr = ep->udccsr_value;
-+ *ep->reg_udccr = ep->udccr_value;
-+ DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n",
-+ i, *ep->reg_udccsr, *ep->reg_udccr);
-+ }
-+ }
-+
-+ udc_enable(dev);
-+
-+ /* OTGPH bit is set when sleep mode is entered.
-+ * it indicates that OTG pad is retaining its state.
-+ * Upon exit from sleep mode and before clearing OTGPH,
-+ * Software must configure the USB OTG pad, UDC, and UHC
-+ * to the state they were in before entering sleep mode.*/
-+ PSSR |= PSSR_OTGPH;
-+
-+ return 0;
-+}
-+#endif
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct platform_driver udc_driver = {
-+ .driver = {
-+ .name = "pxa2xx-udc",
-+ },
-+ .probe = pxa27x_udc_probe,
-+ .remove = pxa27x_udc_remove,
-+#ifdef CONFIG_PM
-+ .shutdown = pxa27x_udc_shutdown,
-+ .suspend = pxa27x_udc_suspend,
-+ .resume = pxa27x_udc_resume
-+#endif
-+};
-+
-+static int __init udc_init(void)
-+{
-+ printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
-+ return platform_driver_register(&udc_driver);
-+}
-+module_init(udc_init);
-+
-+static void __exit udc_exit(void)
-+{
-+ platform_driver_unregister(&udc_driver);
-+}
-+module_exit(udc_exit);
-+
-+MODULE_DESCRIPTION(DRIVER_DESC);
-+MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
-new file mode 100644
-index 0000000..d4377cf
---- /dev/null
-+++ b/drivers/usb/gadget/pxa27x_udc.h
-@@ -0,0 +1,298 @@
-+/*
-+ * linux/drivers/usb/gadget/pxa27x_udc.h
-+ * Intel PXA27x on-chip full speed USB device controller
-+ *
-+ * Copyright (C) 2003 Robert Schwebel <r.schwebel at pengutronix.de>, Pengutronix
-+ * Copyright (C) 2003 David Brownell
-+ * Copyright (C) 2004 Intel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __LINUX_USB_GADGET_PXA27X_H
-+#define __LINUX_USB_GADGET_PXA27X_H
-+
-+#include <linux/types.h>
-+
-+struct pxa27x_udc;
-+
-+struct pxa27x_ep {
-+ struct pxa27x_udc *dev;
-+ struct usb_ep *usb_ep;
-+ const struct usb_endpoint_descriptor *desc;
-+
-+ struct list_head queue;
-+ unsigned long pio_irqs;
-+ unsigned long dma_irqs;
-+
-+ unsigned pxa_ep_num;
-+ int dma;
-+ unsigned fifo_size;
-+ unsigned ep_type;
-+
-+ unsigned stopped : 1;
-+ unsigned dma_con : 1;
-+ unsigned dir_in : 1;
-+ unsigned assigned : 1;
-+
-+ unsigned ep_num;
-+ unsigned config;
-+ unsigned interface;
-+ unsigned aisn;
-+ /* UDCCSR = UDC Control/Status Register for this EP
-+ * UBCR = UDC Byte Count Remaining (contents of OUT fifo)
-+ * UDCDR = UDC Endpoint Data Register (the fifo)
-+ * UDCCR = UDC Endpoint Configuration Registers
-+ * DRCM = DMA Request Channel Map
-+ */
-+ volatile u32 *reg_udccsr;
-+ volatile u32 *reg_udcbcr;
-+ volatile u32 *reg_udcdr;
-+ volatile u32 *reg_udccr;
-+#ifdef USE_DMA
-+ volatile u32 *reg_drcmr;
-+#define drcmr(n) .reg_drcmr = & DRCMR ## n ,
-+#else
-+#define drcmr(n)
-+#endif
-+
-+#ifdef CONFIG_PM
-+ unsigned udccsr_value;
-+ unsigned udccr_value;
-+#endif
-+};
-+
-+struct pxa27x_virt_ep {
-+ struct usb_ep usb_ep;
-+ const struct usb_endpoint_descriptor *desc;
-+ struct pxa27x_ep *pxa_ep;
-+};
-+
-+struct pxa27x_request {
-+ struct usb_request req;
-+ struct list_head queue;
-+};
-+
-+enum ep0_state {
-+ EP0_IDLE,
-+ EP0_IN_DATA_PHASE,
-+ EP0_OUT_DATA_PHASE,
-+// EP0_END_XFER,
-+ EP0_STALL,
-+ EP0_NO_ACTION
-+};
-+
-+#define EP0_FIFO_SIZE ((unsigned)16)
-+#define BULK_FIFO_SIZE ((unsigned)64)
-+#define ISO_FIFO_SIZE ((unsigned)256)
-+#define INT_FIFO_SIZE ((unsigned)8)
-+
-+struct udc_stats {
-+ struct ep0stats {
-+ unsigned long ops;
-+ unsigned long bytes;
-+ } read, write;
-+ unsigned long irqs;
-+};
-+
-+#define UDC_EP_NUM 24
-+
-+
-+struct pxa27x_udc {
-+ struct usb_gadget gadget;
-+ struct usb_gadget_driver *driver;
-+
-+ enum ep0_state ep0state;
-+ struct udc_stats stats;
-+ unsigned got_irq : 1,
-+ has_cfr : 1,
-+ req_pending : 1,
-+ req_std : 1,
-+ req_config : 1;
-+
-+#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
-+ struct timer_list timer;
-+
-+ struct device *dev;
-+ struct pxa2xx_udc_mach_info *mach;
-+ u64 dma_mask;
-+ struct pxa27x_virt_ep virt_ep0;
-+ struct pxa27x_ep ep[UDC_EP_NUM];
-+ unsigned int ep_num;
-+
-+ unsigned configuration,
-+ interface,
-+ alternate;
-+#ifdef CONFIG_PM
-+ unsigned udccsr0;
-+#endif
-+};
-+
-+static struct pxa27x_udc *the_controller;
-+
-+#if 0
-+/*-------------------------------------------------------------------------*/
-+
-+
-+/* one GPIO should be used to detect host disconnect */
-+static inline int is_usb_connected(void)
-+{
-+ if (!the_controller->mach->udc_is_connected)
-+ return 1;
-+ return the_controller->mach->udc_is_connected();
-+}
-+
-+/* one GPIO should force the host to see this device (or not) */
-+static inline void make_usb_disappear(void)
-+{
-+ if (!the_controller->mach->udc_command)
-+ return;
-+ the_controller->mach->udc_command(PXA27X_UDC_CMD_DISCONNECT);
-+}
-+
-+static inline void let_usb_appear(void)
-+{
-+ if (!the_controller->mach->udc_command)
-+ return;
-+ the_controller->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
-+}
-+#endif
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * Debugging support vanishes in non-debug builds. DBG_NORMAL should be
-+ * mostly silent during normal use/testing, with no timing side-effects.
-+ */
-+#define DBG_NORMAL 1 /* error paths, device state transitions */
-+#define DBG_VERBOSE 2 /* add some success path trace info */
-+#define DBG_NOISY 3 /* ... even more: request level */
-+#define DBG_VERY_NOISY 4 /* ... even more: packet level */
-+
-+#ifdef DEBUG
-+static const char *state_name[] = {
-+ "EP0_IDLE",
-+ "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
-+ "EP0_END_XFER", "EP0_STALL"
-+};
-+
-+#define DMSG(stuff...) printk(KERN_ERR "udc: " stuff)
-+
-+#ifdef VERBOSE
-+# define UDC_DEBUG DBG_VERBOSE
-+#else
-+# define UDC_DEBUG DBG_NORMAL
-+#endif
-+
-+static void __attribute__ ((__unused__))
-+dump_udccr(const char *label)
-+{
-+ u32 udccr = UDCCR;
-+ DMSG("%s 0x%08x =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n",
-+ label, udccr,
-+ (udccr & UDCCR_OEN) ? " oen":"",
-+ (udccr & UDCCR_AALTHNP) ? " aalthnp":"",
-+ (udccr & UDCCR_AHNP) ? " rem" : "",
-+ (udccr & UDCCR_BHNP) ? " rstir" : "",
-+ (udccr & UDCCR_DWRE) ? " dwre" : "",
-+ (udccr & UDCCR_SMAC) ? " smac" : "",
-+ (udccr & UDCCR_EMCE) ? " emce" : "",
-+ (udccr & UDCCR_UDR) ? " udr" : "",
-+ (udccr & UDCCR_UDA) ? " uda" : "",
-+ (udccr & UDCCR_UDE) ? " ude" : "",
-+ (udccr & UDCCR_ACN) >> UDCCR_ACN_S,
-+ (udccr & UDCCR_AIN) >> UDCCR_AIN_S,
-+ (udccr & UDCCR_AAISN)>> UDCCR_AAISN_S );
-+}
-+
-+static void __attribute__ ((__unused__))
-+dump_udccsr0(const char *label)
-+{
-+ u32 udccsr0 = UDCCSR0;
-+
-+ DMSG("%s %s 0x%08x =%s%s%s%s%s%s%s\n",
-+ label, state_name[the_controller->ep0state], udccsr0,
-+ (udccsr0 & UDCCSR0_SA) ? " sa" : "",
-+ (udccsr0 & UDCCSR0_RNE) ? " rne" : "",
-+ (udccsr0 & UDCCSR0_FST) ? " fst" : "",
-+ (udccsr0 & UDCCSR0_SST) ? " sst" : "",
-+ (udccsr0 & UDCCSR0_DME) ? " dme" : "",
-+ (udccsr0 & UDCCSR0_IPR) ? " ipr" : "",
-+ (udccsr0 & UDCCSR0_OPC) ? " opr" : "");
-+}
-+
-+static void __attribute__ ((__unused__))
-+dump_state(struct pxa27x_udc *dev)
-+{
-+ unsigned i;
-+
-+ DMSG("%s, udcicr %02X.%02X, udcsir %02X.%02x, udcfnr %02X\n",
-+ state_name[dev->ep0state],
-+ UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR);
-+ dump_udccr("udccr");
-+
-+ if (!dev->driver) {
-+ DMSG("no gadget driver bound\n");
-+ return;
-+ } else
-+ DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
-+
-+
-+ dump_udccsr0 ("udccsr0");
-+ DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
-+ dev->stats.write.bytes, dev->stats.write.ops,
-+ dev->stats.read.bytes, dev->stats.read.ops);
-+
-+ for (i = 1; i < UDC_EP_NUM; i++) {
-+ if (dev->ep[i].assigned)
-+ DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccsr);
-+ }
-+}
-+
-+#if 0
-+static void dump_regs(u8 ep)
-+{
-+ DMSG("EP:%d UDCCSR:0x%08x UDCBCR:0x%08x\n UDCCR:0x%08x\n",
-+ ep,UDCCSN(ep), UDCBCN(ep), UDCCN(ep));
-+}
-+static void dump_req (struct pxa27x_request *req)
-+{
-+ struct usb_request *r = &req->req;
-+
-+ DMSG("%s: buf:0x%08x length:%d dma:0x%08x actual:%d\n",
-+ __FUNCTION__, (unsigned)r->buf, r->length,
-+ r->dma, r->actual);
-+}
-+#endif
-+
-+#else
-+
-+#define DMSG(stuff...) do{}while(0)
-+
-+#define dump_udccr(x) do{}while(0)
-+#define dump_udccsr0(x) do{}while(0)
-+#define dump_state(x) do{}while(0)
-+
-+#define UDC_DEBUG ((unsigned)4)
-+
-+#endif
-+
-+#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
-+
-+#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
-+#define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
-+
-+
-+#endif /* __LINUX_USB_GADGET_PXA27X_H */
-diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
-index 0e5d0e6..9483a49 100644
---- a/drivers/usb/gadget/pxa2xx_udc.h
-+++ b/drivers/usb/gadget/pxa2xx_udc.h
-@@ -206,7 +206,8 @@ dump_state(struct pxa2xx_udc *dev)
- unsigned i;
-
- DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
-- is_usb_connected() ? "host " : "disconnected",
-+ //is_usb_connected() ? "host " : "disconnected",
-+ "host ",
- state_name[dev->ep0state],
- UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
- dump_udccr("udccr");
-@@ -223,8 +224,8 @@ dump_state(struct pxa2xx_udc *dev)
- } else
- DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
-
-- if (!is_usb_connected())
-- return;
-+ //if (!is_usb_connected())
-+ // return;
-
- dump_udccs0 ("udccs0");
- DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
-diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
-index ce4d2e0..5dac23f 100644
---- a/drivers/usb/gadget/serial.c
-+++ b/drivers/usb/gadget/serial.c
-@@ -1356,6 +1356,7 @@ static int __init gs_bind(struct usb_gadget *gadget)
- struct usb_ep *ep;
- struct gs_dev *dev;
- int gcnum;
-+ struct usb_endpoint_config ep_config[2];
-
- /* Some controllers can't support CDC ACM:
- * - sh doesn't support multiple interfaces or configs;
-@@ -1376,22 +1377,33 @@ static int __init gs_bind(struct usb_gadget *gadget)
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
- }
-
-+ ep_config[0].config = GS_BULK_CONFIG_ID;
-+ ep_config[0].interface = gs_bulk_interface_desc.bInterfaceNumber;
-+ ep_config[0].altinterface = gs_bulk_interface_desc.bAlternateSetting;
-+ ep_config[1].config = GS_ACM_CONFIG_ID;
-+ ep_config[1].interface = gs_data_interface_desc.bInterfaceNumber;
-+ ep_config[1].altinterface = gs_data_interface_desc.bAlternateSetting;
-+
- usb_ep_autoconfig_reset(gadget);
-
-- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
-+ ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc, &ep_config[0], 2);
- if (!ep)
- goto autoconf_fail;
- EP_IN_NAME = ep->name;
- ep->driver_data = ep; /* claim the endpoint */
-
-- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
-+ ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc, &ep_config[0], 2);
- if (!ep)
- goto autoconf_fail;
- EP_OUT_NAME = ep->name;
- ep->driver_data = ep; /* claim the endpoint */
-
- if (use_acm) {
-- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
-+ ep_config[0].config = GS_ACM_CONFIG_ID;
-+ ep_config[0].interface = gs_control_interface_desc.bInterfaceNumber;
-+ ep_config[0].altinterface = gs_control_interface_desc.bAlternateSetting;
-+
-+ ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc, &ep_config[0], 1);
- if (!ep) {
- printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name);
- goto autoconf_fail;
-diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
-index fcfe869..1e40d46 100644
---- a/drivers/usb/gadget/zero.c
-+++ b/drivers/usb/gadget/zero.c
-@@ -1142,6 +1142,7 @@ zero_bind (struct usb_gadget *gadget)
- struct zero_dev *dev;
- struct usb_ep *ep;
- int gcnum;
-+ struct usb_endpoint_config ep_config[2];
-
- /* FIXME this can't yet work right with SH ... it has only
- * one configuration, numbered one.
-@@ -1154,7 +1155,15 @@ zero_bind (struct usb_gadget *gadget)
- * but there may also be important quirks to address.
- */
- usb_ep_autoconfig_reset (gadget);
-- ep = usb_ep_autoconfig (gadget, &fs_source_desc);
-+
-+ ep_config[0].config = CONFIG_SOURCE_SINK;
-+ ep_config[0].interface = source_sink_intf.bInterfaceNumber;
-+ ep_config[0].altinterface = source_sink_intf.bAlternateSetting;
-+ ep_config[1].config = CONFIG_LOOPBACK;
-+ ep_config[1].interface = loopback_intf.bInterfaceNumber;
-+ ep_config[1].altinterface = loopback_intf.bAlternateSetting;
-+
-+ ep = usb_ep_autoconfig(gadget, &fs_source_desc, &ep_config[0], 2);
- if (!ep) {
- autoconf_fail:
- printk (KERN_ERR "%s: can't autoconfigure on %s\n",
-@@ -1164,7 +1173,7 @@ autoconf_fail:
- EP_IN_NAME = ep->name;
- ep->driver_data = ep; /* claim */
-
-- ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
-+ ep = usb_ep_autoconfig(gadget, &fs_sink_desc, &ep_config[0], 2);
- if (!ep)
- goto autoconf_fail;
- EP_OUT_NAME = ep->name;
-diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
-index 2580f5f..12e4b91 100644
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -40,7 +40,7 @@ config BACKLIGHT_CLASS_DEVICE
-
- config BACKLIGHT_CORGI
- tristate "Sharp Corgi Backlight Driver (SL Series)"
-- depends on BACKLIGHT_CLASS_DEVICE && PXA_SHARPSL
-+ depends on BACKLIGHT_CLASS_DEVICE && (PXA_SHARPSL || MACH_EM_X270)
- default y
- help
- If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y to enable the
-diff --git a/include/asm-arm/arch-pxa/pwr-i2c.h b/include/asm-arm/arch-pxa/pwr-i2c.h
-new file mode 100644
-index 0000000..6bad486
---- /dev/null
-+++ b/include/asm-arm/arch-pxa/pwr-i2c.h
-@@ -0,0 +1,61 @@
-+/*
-+ * (C) Copyright 2007 CompuLab, Ltd
-+ * Mike Rapoport <mike at compulab.co.il>
-+ *
-+ * Simple Power I2C interface for PXA processors.
-+ * Based on U-Boot PXA I2C driver.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ */
-+
-+#ifndef __PXA_PWR_I2C_H__
-+#define __PXA_PWR_I2C_H__
-+
-+/*
-+ * Configuration items.
-+ */
-+#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */
-+
-+/*
-+ * Probe the given I2C chip address. Returns 0 if a chip responded,
-+ * not 0 on failure.
-+ */
-+extern int pxa_pwr_i2c_probe(u8 chip);
-+
-+/*
-+ * Read/Write interface:
-+ * chip: I2C chip address, range 0..127
-+ * addr: Memory (register) address within the chip
-+ * alen: Number of bytes to use for addr (typically 1, 2 for larger
-+ * memories, 0 for register type devices with only one
-+ * register)
-+ * buffer: Where to read/write the data
-+ * len: How many bytes to read/write
-+ *
-+ * Returns: 0 on success, not 0 on failure
-+ */
-+extern int pxa_pwr_i2c_read(u8 chip, uint addr, int alen, u8 *buffer, int len);
-+extern int pxa_pwr_i2c_write(u8 chip, uint addr, int alen,
-+ u8 *buffer, int len);
-+
-+/*
-+ * Utility routines to read/write registers.
-+ */
-+extern s32 pxa_pwr_i2c_reg_read (u8 chip, u8 reg);
-+extern s32 pxa_pwr_i2c_reg_write(u8 chip, u8 reg, u8 val);
-+
-+#endif /* __PXA_PWR_I2C_H___ */
-diff --git a/include/linux/da9030.h b/include/linux/da9030.h
-new file mode 100644
-index 0000000..6eb89e2
---- /dev/null
-+++ b/include/linux/da9030.h
-@@ -0,0 +1,118 @@
-+#ifndef _DA9030_H
-+#define _DA9030_H
-+
-+/* DA9030 has 24 possible interrupts */
-+#define DA9030_IRQ_COUNT 24
-+
-+/* EVENT A */
-+#define DA9030_IRQ_ONKEY_EN 0
-+#define DA9030_IRQ_PWREN1 1
-+#define DA9030_IRQ_EXTON 2
-+#define DA9030_IRQ_CHDET 3
-+#define DA9030_IRQ_TBAT 4
-+#define DA9030_IRQ_VBATMON 5
-+#define DA9030_IRQ_VBATMONTXON 6
-+#define DA9030_IRQ_CHIOVER 7
-+
-+/* EVENT B */
-+#define DA9030_IRQ_TCTO 8
-+#define DA9030_IRQ_CCTO 9
-+#define DA9030_IRQ_ADC_READY 10
-+#define DA9030_IRQ_VBUS_4_4 11
-+#define DA9030_IRQ_VBUS_4_0 12
-+#define DA9030_IRQ_SESSION_VALID 13
-+#define DA9030_IRQ_SRP_DETECT 14
-+#define DA9030_IRQ_WDOG_INTR 15
-+
-+/* EVENT C */
-+#define DA9030_IRQ_LDO15 16
-+#define DA9030_IRQ_LDO16 17
-+#define DA9030_IRQ_LDO17 18
-+#define DA9030_IRQ_LDO18 19
-+#define DA9030_IRQ_LDO19 20
-+#define DA9030_IRQ_BUCK2 21
-+#define DA9030_IRQ_ADC_IN4 22
-+#define DA9030_IRQ_ADC_IN5 23
-+
-+enum da9030_ldo_sleep_mode {
-+ DA9030_LDO_SLEEP_KEEP = 0x0,
-+ DA9030_LDO_SLEEP_SHUT_DOWN = 0x1,
-+ DA9030_LDO_SLEEP_POWER_UP = 0x2,
-+ DA9030_LDO_SLEEP_HIGH_Z = 0x3,
-+};
-+
-+enum da9030_led_rate {
-+ DA9030_LED_RATE_ON = 0x0,
-+ DA9030_LED_RATE_0_52 = 0x1,
-+ DA9030_LED_RATE_1_05 = 0x2,
-+ DA9030_LED_RATE_2_1 = 0x3,
-+};
-+
-+enum da9030_led_duty_cycle {
-+ DA9030_LED_DUTY_1_16 = 0x0,
-+ DA9030_LED_DUTY_1_8 = 0x1,
-+ DA9030_LED_DUTY_1_4 = 0x2,
-+ DA9030_LED_DUTY_1_2 = 0x3,
-+};
-+
-+enum da9030_led_pwm_chop {
-+ DA9030_LED_PWM_8_8 = 0x0,
-+ DA9030_LED_PWM_7_8 = 0x1,
-+ DA9030_LED_PWM_6_8 = 0x2,
-+ DA9030_LED_PWM_5_8 = 0x3,
-+ DA9030_LED_PWM_4_8 = 0x4,
-+ DA9030_LED_PWM_3_8 = 0x5,
-+ DA9030_LED_PWM_2_8 = 0x6,
-+ DA9030_LED_PWM_1_8 = 0x7,
-+};
-+
-+struct da9030_adc_res {
-+ int vbat_res;
-+ int vbatmin_res;
-+ int vbatmintxon;
-+ int ichmax_res;
-+ int ichmin_res;
-+ int ichaverage_res;
-+ int vchmax_res;
-+ int vchmin_res;
-+ int tbat_res;
-+ int adc_in4_res;
-+ int adc_in5_res;
-+};
-+
-+extern int da9030_get_status(void);
-+extern int da9030_get_fault_log(void);
-+
-+extern void da9030_enable_adc(void);
-+extern void da9030_read_adc(struct da9030_adc_res *adc);
-+
-+extern void da9030_set_wled(int on, unsigned int brightness);
-+
-+extern int da9030_set_led(int led, int on,
-+ enum da9030_led_rate rate,
-+ enum da9030_led_duty_cycle duty,
-+ enum da9030_led_pwm_chop pwm_chop);
-+
-+extern int da9030_set_charger(int on, unsigned int mA, unsigned int mV);
-+extern void da9030_get_charger(int *on, unsigned int *mA, unsigned int *mV);
-+
-+extern int da9030_set_ldo(int ldo, int on, unsigned int mV,
-+ enum da9030_ldo_sleep_mode sleep_mode);
-+extern int da9030_set_buck(int buck, int on, unsigned int mV, int flags);
-+
-+extern void da9030_set_thresholds(unsigned int tbathighp,
-+ unsigned int tbathighn,
-+ unsigned int tbatlow,
-+ unsigned int vbatmon);
-+
-+extern int da9030_register_callback(int event,
-+ void (*callback)(int event, void *data),
-+ void *data);
-+extern void da9030_unregister_callback(int event);
-+
-+/* Keep these for now, although they are unsafe. When I'll see what
-+ other methods are needed from DA9030, I'll remove these */
-+extern s32 da9030_get_reg(u32 reg);
-+extern s32 da9030_set_reg(u32 reg, u8 val);
-+
-+#endif
-diff --git a/include/linux/usb_gadget.h b/include/linux/usb_gadget.h
-index 4f59b2a..792c568 100644
---- a/include/linux/usb_gadget.h
-+++ b/include/linux/usb_gadget.h
-@@ -397,10 +397,28 @@ usb_ep_fifo_flush (struct usb_ep *ep)
-
- struct usb_gadget;
-
-+/**
-+ * struct usb_endpoint_config - possible configurations of a given endpoint
-+ * @config: the configuration number
-+ * @interface: the interface number
-+ * @altinterface: the altinterface number
-+ *
-+ * Used as an array to pass information about the possible configurations
-+ * of a given endpoint to the bus controller.
-+ */
-+struct usb_endpoint_config {
-+ u8 config;
-+ u8 interface;
-+ u8 altinterface;
-+};
-+
- /* the rest of the api to the controller hardware: device operations,
- * which don't involve endpoints (or i/o).
- */
- struct usb_gadget_ops {
-+ struct usb_ep* (*ep_alloc)(struct usb_gadget *,
-+ struct usb_endpoint_descriptor *,
-+ struct usb_endpoint_config *, int);
- int (*get_frame)(struct usb_gadget *);
- int (*wakeup)(struct usb_gadget *);
- int (*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
-@@ -824,7 +842,10 @@ int usb_gadget_config_buf(const struct usb_config_descriptor *config,
- /* utility wrapping a simple endpoint selection policy */
-
- extern struct usb_ep *usb_ep_autoconfig (struct usb_gadget *,
-- struct usb_endpoint_descriptor *) __devinit;
-+ struct usb_endpoint_descriptor *,
-+ struct usb_endpoint_config *,
-+ int numconfigs
-+);
-
- extern void usb_ep_autoconfig_reset (struct usb_gadget *) __devinit;
-
-diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
-new file mode 100644
-index 0000000..354e533
---- /dev/null
-+++ b/include/linux/wm97xx.h
-@@ -0,0 +1,291 @@
-+
-+/*
-+ * Register bits and API for Wolfson WM97xx series of codecs
-+ */
-+
-+#ifndef _LINUX_WM97XX_H
-+#define _LINUX_WM97XX_H
-+
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/ac97_codec.h>
-+#include <sound/initval.h>
-+#include <linux/types.h>
-+#include <linux/list.h>
-+#include <linux/input.h> /* Input device layer */
-+
-+/*
-+ * WM97xx AC97 Touchscreen registers
-+ */
-+#define AC97_WM97XX_DIGITISER1 0x76
-+#define AC97_WM97XX_DIGITISER2 0x78
-+#define AC97_WM97XX_DIGITISER_RD 0x7a
-+#define AC97_WM9713_DIG1 0x74
-+#define AC97_WM9713_DIG2 AC97_WM97XX_DIGITISER1
-+#define AC97_WM9713_DIG3 AC97_WM97XX_DIGITISER2
-+
-+/*
-+ * WM97xx register bits
-+ */
-+#define WM97XX_POLL 0x8000 /* initiate a polling measurement */
-+#define WM97XX_ADCSEL_X 0x1000 /* x coord measurement */
-+#define WM97XX_ADCSEL_Y 0x2000 /* y coord measurement */
-+#define WM97XX_ADCSEL_PRES 0x3000 /* pressure measurement */
-+#define WM97XX_ADCSEL_MASK 0x7000
-+#define WM97XX_COO 0x0800 /* enable coordinate mode */
-+#define WM97XX_CTC 0x0400 /* enable continuous mode */
-+#define WM97XX_CM_RATE_93 0x0000 /* 93.75Hz continuous rate */
-+#define WM97XX_CM_RATE_187 0x0100 /* 187.5Hz continuous rate */
-+#define WM97XX_CM_RATE_375 0x0200 /* 375Hz continuous rate */
-+#define WM97XX_CM_RATE_750 0x0300 /* 750Hz continuous rate */
-+#define WM97XX_CM_RATE_8K 0x00f0 /* 8kHz continuous rate */
-+#define WM97XX_CM_RATE_12K 0x01f0 /* 12kHz continuous rate */
-+#define WM97XX_CM_RATE_24K 0x02f0 /* 24kHz continuous rate */
-+#define WM97XX_CM_RATE_48K 0x03f0 /* 48kHz continuous rate */
-+#define WM97XX_CM_RATE_MASK 0x03f0
-+#define WM97XX_RATE(i) (((i & 3) << 8) | ((i & 4) ? 0xf0 : 0))
-+#define WM97XX_DELAY(i) ((i << 4) & 0x00f0) /* sample delay times */
-+#define WM97XX_DELAY_MASK 0x00f0
-+#define WM97XX_SLEN 0x0008 /* slot read back enable */
-+#define WM97XX_SLT(i) ((i - 5) & 0x7) /* touchpanel slot selection (5-11) */
-+#define WM97XX_SLT_MASK 0x0007
-+#define WM97XX_PRP_DETW 0x4000 /* pen detect on, digitiser off, wake up */
-+#define WM97XX_PRP_DET 0x8000 /* pen detect on, digitiser off, no wake up */
-+#define WM97XX_PRP_DET_DIG 0xc000 /* pen detect on, digitiser on */
-+#define WM97XX_RPR 0x2000 /* wake up on pen down */
-+#define WM97XX_PEN_DOWN 0x8000 /* pen is down */
-+#define WM97XX_ADCSRC_MASK 0x7000 /* ADC source mask */
-+
-+#define WM97XX_AUX_ID1 0x8001
-+#define WM97XX_AUX_ID2 0x8002
-+#define WM97XX_AUX_ID3 0x8003
-+#define WM97XX_AUX_ID4 0x8004
-+
-+
-+/* WM9712 Bits */
-+#define WM9712_45W 0x1000 /* set for 5-wire touchscreen */
-+#define WM9712_PDEN 0x0800 /* measure only when pen down */
-+#define WM9712_WAIT 0x0200 /* wait until adc is read before next sample */
-+#define WM9712_PIL 0x0100 /* current used for pressure measurement. set 400uA else 200uA */
-+#define WM9712_MASK_HI 0x0040 /* hi on mask pin (47) stops conversions */
-+#define WM9712_MASK_EDGE 0x0080 /* rising/falling edge on pin delays sample */
-+#define WM9712_MASK_SYNC 0x00c0 /* rising/falling edge on mask initiates sample */
-+#define WM9712_RPU(i) (i&0x3f) /* internal pull up on pen detect (64k / rpu) */
-+#define WM9712_PD(i) (0x1 << i) /* power management */
-+
-+/* WM9712 Registers */
-+#define AC97_WM9712_POWER 0x24
-+#define AC97_WM9712_REV 0x58
-+
-+/* WM9705 Bits */
-+#define WM9705_PDEN 0x1000 /* measure only when pen is down */
-+#define WM9705_PINV 0x0800 /* inverts sense of pen down output */
-+#define WM9705_BSEN 0x0400 /* BUSY flag enable, pin47 is 1 when busy */
-+#define WM9705_BINV 0x0200 /* invert BUSY (pin47) output */
-+#define WM9705_WAIT 0x0100 /* wait until adc is read before next sample */
-+#define WM9705_PIL 0x0080 /* current used for pressure measurement. set 400uA else 200uA */
-+#define WM9705_PHIZ 0x0040 /* set PHONE and PCBEEP inputs to high impedance */
-+#define WM9705_MASK_HI 0x0010 /* hi on mask stops conversions */
-+#define WM9705_MASK_EDGE 0x0020 /* rising/falling edge on pin delays sample */
-+#define WM9705_MASK_SYNC 0x0030 /* rising/falling edge on mask initiates sample */
-+#define WM9705_PDD(i) (i & 0x000f) /* pen detect comparator threshold */
-+
-+
-+/* WM9713 Bits */
-+#define WM9713_PDPOL 0x0400 /* Pen down polarity */
-+#define WM9713_POLL 0x0200 /* initiate a polling measurement */
-+#define WM9713_CTC 0x0100 /* enable continuous mode */
-+#define WM9713_ADCSEL_X 0x0002 /* X measurement */
-+#define WM9713_ADCSEL_Y 0x0004 /* Y measurement */
-+#define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */
-+#define WM9713_COO 0x0001 /* enable coordinate mode */
-+#define WM9713_PDEN 0x0800 /* measure only when pen down */
-+#define WM9713_ADCSEL_MASK 0x00fe /* ADC selection mask */
-+#define WM9713_WAIT 0x0200 /* coordinate wait */
-+
-+/* AUX ADC ID's */
-+#define TS_COMP1 0x0
-+#define TS_COMP2 0x1
-+#define TS_BMON 0x2
-+#define TS_WIPER 0x3
-+
-+/* ID numbers */
-+#define WM97XX_ID1 0x574d
-+#define WM9712_ID2 0x4c12
-+#define WM9705_ID2 0x4c05
-+#define WM9713_ID2 0x4c13
-+
-+/* Codec GPIO's */
-+#define WM97XX_MAX_GPIO 16
-+#define WM97XX_GPIO_1 (1 << 1)
-+#define WM97XX_GPIO_2 (1 << 2)
-+#define WM97XX_GPIO_3 (1 << 3)
-+#define WM97XX_GPIO_4 (1 << 4)
-+#define WM97XX_GPIO_5 (1 << 5)
-+#define WM97XX_GPIO_6 (1 << 6)
-+#define WM97XX_GPIO_7 (1 << 7)
-+#define WM97XX_GPIO_8 (1 << 8)
-+#define WM97XX_GPIO_9 (1 << 9)
-+#define WM97XX_GPIO_10 (1 << 10)
-+#define WM97XX_GPIO_11 (1 << 11)
-+#define WM97XX_GPIO_12 (1 << 12)
-+#define WM97XX_GPIO_13 (1 << 13)
-+#define WM97XX_GPIO_14 (1 << 14)
-+#define WM97XX_GPIO_15 (1 << 15)
-+
-+
-+#define AC97_LINK_FRAME 21 /* time in uS for AC97 link frame */
-+
-+
-+/*---------------- Return codes from sample reading functions ---------------*/
-+
-+/* More data is available; call the sample gathering function again */
-+#define RC_AGAIN 0x00000001
-+/* The returned sample is valid */
-+#define RC_VALID 0x00000002
-+/* The pen is up (the first RC_VALID without RC_PENUP means pen is down) */
-+#define RC_PENUP 0x00000004
-+/* The pen is down (RC_VALID implies RC_PENDOWN, but sometimes it is helpful
-+ to tell the handler that the pen is down but we don't know yet his coords,
-+ so the handler should not sleep or wait for pendown irq) */
-+#define RC_PENDOWN 0x00000008
-+
-+/* The wm97xx driver provides a private API for writing platform-specific
-+ * drivers.
-+ */
-+
-+/* The structure used to return arch specific sampled data into */
-+struct wm97xx_data {
-+ int x;
-+ int y;
-+ int p;
-+};
-+
-+/* Codec GPIO status
-+ */
-+typedef enum {
-+ WM97XX_GPIO_HIGH,
-+ WM97XX_GPIO_LOW
-+} wm97xx_gpio_status_t;
-+
-+/* Codec GPIO direction
-+ */
-+typedef enum {
-+ WM97XX_GPIO_IN,
-+ WM97XX_GPIO_OUT
-+} wm97xx_gpio_dir_t;
-+
-+/* Codec GPIO polarity
-+ */
-+typedef enum {
-+ WM97XX_GPIO_POL_HIGH,
-+ WM97XX_GPIO_POL_LOW
-+} wm97xx_gpio_pol_t;
-+
-+/* Codec GPIO sticky
-+ */
-+typedef enum {
-+ WM97XX_GPIO_STICKY,
-+ WM97XX_GPIO_NOTSTICKY
-+} wm97xx_gpio_sticky_t;
-+
-+/* Codec GPIO wake
-+ */
-+typedef enum {
-+ WM97XX_GPIO_WAKE,
-+ WM97XX_GPIO_NOWAKE
-+} wm97xx_gpio_wake_t;
-+
-+
-+/*
-+ * Digitiser ioctl commands
-+ */
-+#define WM97XX_DIG_START 0x1
-+#define WM97XX_DIG_STOP 0x2
-+#define WM97XX_PHY_INIT 0x3
-+#define WM97XX_AUX_PREPARE 0x4
-+#define WM97XX_DIG_RESTORE 0x5
-+
-+struct wm97xx;
-+extern struct wm97xx_codec_drv wm97xx_codec;
-+
-+/*
-+ * Codec driver interface - allows mapping to WM9705/12/13 and newer codecs
-+ */
-+struct wm97xx_codec_drv {
-+ u16 id;
-+ char *name;
-+ int (*poll_sample) (struct wm97xx *, int adcsel, int *sample); /* read 1 sample */
-+ int (*poll_touch) (struct wm97xx *, struct wm97xx_data *); /* read X,Y,[P] in poll */
-+ int (*digitiser_ioctl) (struct wm97xx *, int cmd);
-+ int (*acc_enable) (struct wm97xx *, int enable);
-+};
-+
-+
-+/* Machine specific and accelerated touch operations */
-+struct wm97xx_mach_ops {
-+
-+ /* accelerated touch readback - coords are transmited on AC97 link */
-+ int acc_enabled;
-+ void (*acc_pen_up) (struct wm97xx *);
-+ int (*acc_pen_down) (struct wm97xx *);
-+ int (*acc_startup) (struct wm97xx *);
-+ void (*acc_shutdown) (struct wm97xx *);
-+
-+ /* pre and post sample - can be used to minimise any analog noise */
-+ void (*pre_sample) (int); /* function to run before sampling */
-+ void (*post_sample) (int); /* function to run after sampling */
-+};
-+
-+struct wm97xx {
-+ u16 dig[3], id, gpio[6], misc; /* Cached codec registers */
-+ u16 dig_save[3]; /* saved during aux reading */
-+ struct wm97xx_codec_drv *codec; /* attached codec driver*/
-+ struct input_dev* input_dev; /* touchscreen input device */
-+ struct snd_ac97 *ac97; /* ALSA codec access */
-+ struct device *dev; /* ALSA device */
-+ struct device *battery_dev;
-+ struct device *touch_dev;
-+ struct wm97xx_mach_ops *mach_ops;
-+ struct mutex codec_mutex;
-+ struct completion ts_init;
-+ struct completion ts_exit;
-+ struct task_struct *ts_task;
-+ unsigned int pen_irq; /* Pen IRQ number in use */
-+ wait_queue_head_t pen_irq_wait; /* Pen IRQ wait queue */
-+ struct workqueue_struct *pen_irq_workq;
-+ struct work_struct pen_event_work;
-+ u16 acc_slot; /* AC97 slot used for acc touch data */
-+ u16 acc_rate; /* acc touch data rate */
-+ unsigned int ts_use_count;
-+ unsigned pen_is_down:1; /* Pen is down */
-+ unsigned aux_waiting:1; /* aux measurement waiting */
-+ unsigned pen_probably_down:1; /* used in polling mode */
-+};
-+
-+/* Codec GPIO access (not supported on WM9705)
-+ * This can be used to set/get codec GPIO and Virtual GPIO status.
-+ */
-+wm97xx_gpio_status_t wm97xx_get_gpio(struct wm97xx *wm, u32 gpio);
-+void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
-+ wm97xx_gpio_status_t status);
-+void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio,
-+ wm97xx_gpio_dir_t dir,
-+ wm97xx_gpio_pol_t pol,
-+ wm97xx_gpio_sticky_t sticky,
-+ wm97xx_gpio_wake_t wake);
-+
-+/* codec AC97 IO access */
-+int wm97xx_reg_read(struct wm97xx *wm, u16 reg);
-+void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val);
-+
-+/* aux adc readback */
-+int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel);
-+
-+/* machine ops */
-+int wm97xx_register_mach_ops(struct wm97xx *, struct wm97xx_mach_ops *);
-+void wm97xx_unregister_mach_ops(struct wm97xx *);
-+
-+extern struct bus_type wm97xx_bus_type;
-+#endif
-diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
-index a83e229..89b5730 100644
---- a/sound/soc/pxa/Kconfig
-+++ b/sound/soc/pxa/Kconfig
-@@ -53,3 +53,12 @@ config SND_PXA2XX_SOC_TOSA
- help
- Say Y if you want to add support for SoC audio on Sharp
- Zaurus SL-C6000x models (Tosa).
-+
-+config SND_PXA2XX_SOC_EM_X270
-+ tristate "SoC Audio support for CompuLab EM-x270"
-+ depends on SND_PXA2XX_SOC && MACH_EM_X270
-+ select SND_PXA2XX_SOC_AC97
-+ select SND_SOC_WM9712
-+ help
-+ Say Y if you want to add support for SoC audio on
-+ CompuLab EM-x270.
-diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
-index 78e0d6b..32375ac 100644
---- a/sound/soc/pxa/Makefile
-+++ b/sound/soc/pxa/Makefile
-@@ -12,9 +12,11 @@ snd-soc-corgi-objs := corgi.o
- snd-soc-poodle-objs := poodle.o
- snd-soc-tosa-objs := tosa.o
- snd-soc-spitz-objs := spitz.o
-+snd-soc-em-x270-objs := em-x270.o
-
- obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o
- obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o
- obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o
- obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o
-+obj-$(CONFIG_SND_PXA2XX_SOC_EM_X270) += snd-soc-em-x270.o
-
-diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
-new file mode 100644
-index 0000000..9e891d0
---- /dev/null
-+++ b/sound/soc/pxa/em-x270.c
-@@ -0,0 +1,137 @@
-+/*
-+ * em-x270.c -- SoC audio for EM-X270
-+ *
-+ * Copyright 2007 CompuLab, Ltd.
-+ *
-+ * Author: Mike Rapoport <mike at compulab.co.il>
-+ *
-+ * Copied from tosa.c:
-+ * Copyright 2005 Wolfson Microelectronics PLC.
-+ * Copyright 2005 Openedhand Ltd.
-+ *
-+ * Authors: Liam Girdwood <liam.girdwood at wolfsonmicro.com>
-+ * Richard Purdie <richard at openedhand.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/device.h>
-+
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/soc.h>
-+#include <sound/soc-dapm.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/arch/pxa-regs.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/audio.h>
-+
-+#include "../codecs/wm9712.h"
-+#include "pxa2xx-pcm.h"
-+#include "pxa2xx-ac97.h"
-+
-+static struct snd_soc_machine em_x270;
-+
-+#define EM_X270_HP 0
-+#define EM_X270_MIC_INT 1
-+#define EM_X270_HEADSET 2
-+#define EM_X270_HP_OFF 3
-+#define EM_X270_SPK_ON 0
-+#define EM_X270_SPK_OFF 1
-+
-+
-+static struct snd_soc_ops em_x270_ops = {
-+};
-+
-+static const struct snd_kcontrol_new em_x270_controls[] = {
-+};
-+
-+static int em_x270_ac97_init(struct snd_soc_codec *codec)
-+{
-+ int i, err;
-+
-+ /* add em_x270 specific controls */
-+ for (i = 0; i < ARRAY_SIZE(em_x270_controls); i++) {
-+ err = snd_ctl_add(codec->card,
-+ snd_soc_cnew(&em_x270_controls[i],codec, NULL));
-+ if (err < 0)
-+ return err;
-+ }
-+
-+ snd_soc_dapm_sync_endpoints(codec);
-+ return 0;
-+}
-+
-+static struct snd_soc_dai_link em_x270_dai[] = {
-+ {
-+ .name = "AC97",
-+ .stream_name = "AC97 HiFi",
-+ .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI],
-+ .codec_dai = &wm9712_dai[WM9712_DAI_AC97_HIFI],
-+ .init = em_x270_ac97_init,
-+ .ops = &em_x270_ops,
-+ },
-+ {
-+ .name = "AC97 Aux",
-+ .stream_name = "AC97 Aux",
-+ .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX],
-+ .codec_dai = &wm9712_dai[WM9712_DAI_AC97_AUX],
-+ .ops = &em_x270_ops,
-+ },
-+};
-+
-+static struct snd_soc_machine em_x270 = {
-+ .name = "EM-X270",
-+ .dai_link = em_x270_dai,
-+ .num_links = ARRAY_SIZE(em_x270_dai),
-+};
-+
-+static struct snd_soc_device em_x270_snd_devdata = {
-+ .machine = &em_x270,
-+ .platform = &pxa2xx_soc_platform,
-+ .codec_dev = &soc_codec_dev_wm9712,
-+};
-+
-+static struct platform_device *em_x270_snd_device;
-+
-+static int __init em_x270_init(void)
-+{
-+ int ret;
-+
-+ if (!machine_is_em_x270())
-+ return -ENODEV;
-+
-+ em_x270_snd_device = platform_device_alloc("soc-audio", -1);
-+ if (!em_x270_snd_device)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(em_x270_snd_device, &em_x270_snd_devdata);
-+ em_x270_snd_devdata.dev = &em_x270_snd_device->dev;
-+ ret = platform_device_add(em_x270_snd_device);
-+
-+ if (ret)
-+ platform_device_put(em_x270_snd_device);
-+
-+ return ret;
-+}
-+
-+static void __exit em_x270_exit(void)
-+{
-+ platform_device_unregister(em_x270_snd_device);
-+}
-+
-+module_init(em_x270_init);
-+module_exit(em_x270_exit);
-+
-+/* Module information */
-+MODULE_AUTHOR("Mike Rapoport");
-+MODULE_DESCRIPTION("ALSA SoC EM-X270");
-+MODULE_LICENSE("GPL");
diff --git a/meta/recipes-kernel/linux/linux_2.6.23.bb b/meta/recipes-kernel/linux/linux_2.6.23.bb
deleted file mode 100644
index 4ced980..0000000
--- a/meta/recipes-kernel/linux/linux_2.6.23.bb
+++ /dev/null
@@ -1,83 +0,0 @@
-require linux.inc
-
-# Mark archs/machines that this kernel supports
-DEFAULT_PREFERENCE = "-1"
-DEFAULT_PREFERENCE_cm-x270 = "1"
-DEFAULT_PREFERENCE_em-x270 = "1"
-DEFAULT_PREFERENCE_mpc8313e-rdb = "1"
-DEFAULT_PREFERENCE_mpc8323e-rdb = "1"
-
-PR = "r7"
-
-SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.23.tar.bz2 \
- file://binutils-buildid-arm.patch;patch=1 \
- file://1300-fix-gcc-4.3-false-modulo-optimization.patch.patch;patch=1 \
- file://defconfig \
- "
-
-SRC_URI_append_em-x270 = "\
- file://em-x270.patch;patch=1 \
- file://em-x270-battery-sysfs-fix.patch;patch=1 "
-
-SRC_URI_append_cm-x270 = "\
- file://0001-cm-x270-base2.patch;patch=1 \
- file://0002-cm-x270-match-type.patch;patch=1 \
- file://0003-cm-x270-ide.patch;patch=1 \
- file://0004-cm-x270-it8152.patch;patch=1 \
- file://0005-cm-x270-pcmcia.patch;patch=1 \
- file://0006-ramdisk_load.patch;patch=1 \
- file://0007-mmcsd_large_cards-r0.patch;patch=1 \
- file://0008-cm-x270-nand-simplify-name.patch;patch=1 \
- file://16bpp.patch;patch=1"
-
-CMDLINE_cm-x270 = "console=${CMX270_CONSOLE_SERIAL_PORT},38400 monitor=8 bpp=16 mem=64M mtdparts=physmap-flash.0:256k(boot)ro,0x180000(kernel),-(root);cm-x270-nand:64m(app),-(data) rdinit=/sbin/init root=mtd3 rootfstype=jffs2"
-
-FILES_kernel-image_cm-x270 = ""
-
-python compulab_image() {
- import os
- import os.path
- import struct
-
- machine = bb.data.getVar('MACHINE', d, 1)
- if machine == "cm-x270":
- deploy_dir = bb.data.getVar('DEPLOYDIR', d, 1)
- kernel_file = os.path.join(deploy_dir, bb.data.expand('${KERNEL_IMAGE_BASE_NAME}', d) + '.bin')
- img_file = os.path.join(deploy_dir, bb.data.expand('${KERNEL_IMAGE_BASE_NAME}', d) + '.cmx270')
-
- fo = open(img_file, 'wb')
-
- image_data = open(kernel_file, 'rb').read()
-
- # first write size into first 4 bytes
- size_s = struct.pack('i', len(image_data))
-
- # truncate size if we are running on a 64-bit host
- size_s = size_s[:4]
-
- fo.write(size_s)
- fo.write(image_data)
- fo.close()
-
- os.chdir(deploy_dir)
- link_file = bb.data.expand('${KERNEL_IMAGE_SYMLINK_NAME}', d) + '.cmx270'
- img_file = bb.data.expand('${KERNEL_IMAGE_BASE_NAME}', d) + '.cmx270'
- try:
- os.unlink(link_file)
- except:
- pass
- os.symlink(img_file, link_file)
-}
-do_deploy[postfuncs] += "compulab_image"
-
-do_kernel_image() {
-
- if [ "${MACHINE}" = "em-x270" ]
- then
- mkdir -p ${WORKDIR}/t
- install -m 0644 ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_SYMLINK_NAME}.bin ${WORKDIR}/t/uImage
- mkfs.jffs2 --eraseblock=0x20000 --pad --no-cleanmarkers --faketime --root=${WORKDIR}/t --output=${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.jffs2
- cd ${DEPLOY_DIR_IMAGE} && ln -sf ${KERNEL_IMAGE_BASE_NAME}.jffs2 uImage-em-x270.jffs2
- fi
-}
-addtask kernel_image after do_deploy
--
1.7.0.4
More information about the poky
mailing list