[poky] [PATCH 1/1] init-live.sh: add 'coldplug' udev trigger

From: Tom Zanussi <tom.zanussi at intel.com>

Fixes [BUGID #693]

The init-live.sh script starts udevd in init-live.sh:early_setup(),
but doesn't account for the possibility that the root device may have
already been registered by the kernel before udevd starts up.

If the device is detected after udevd starts up, everything's fine -
udevd gets the 'add' uevent for the device, the root image shows up at
e.g. /media/sda/rootfs.img, and the boot continues.

If however the device is detected before udevd starts up, udevd misses
the 'add' uevent and the root image never shows up, causing it to stay
in the 'waiting for removable media' loop forever.

The 'udevadm trigger' command is meant to be used to avoid this
situation, but init-live.sh doesn't use it.  Furthermore, since the
default was changed in udev 152 from 'add' to 'change', the command
needs to explicity name 'add' as the action.

Signed-off-by: Tom Zanussi <tom.zanussi at intel.com>
---
 meta/recipes-core/initrdscripts/files/init-live.sh |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/meta/recipes-core/initrdscripts/files/init-live.sh b/meta/recipes-core/initrdscripts/files/init-live.sh
index c96b1f4..f3e5145 100644
--- a/meta/recipes-core/initrdscripts/files/init-live.sh
+++ b/meta/recipes-core/initrdscripts/files/init-live.sh
@@ -11,6 +11,7 @@ early_setup() {
     mount -t proc proc /proc
     mount -t sysfs sysfs /sys
     udevd --daemon
+    /sbin/udevadm trigger --action=add
 }
 
 read_args() {
-- 
1.7.0.4