[poky] [PATCH 1/3] sanity.bbclass: make indenting consistent
Paul Eggleton
paul.eggleton at linux.intel.com
Thu Dec 16 03:10:09 PST 2010
Use four spaces throughout the file
Signed-off-by: Paul Eggleton <paul.eggleton at linux.intel.com>
---
meta/classes/sanity.bbclass | 432 +++++++++++++++++++++---------------------
1 files changed, 216 insertions(+), 216 deletions(-)
diff --git a/meta/classes/sanity.bbclass b/meta/classes/sanity.bbclass
index bc02a82..6dc4716 100644
--- a/meta/classes/sanity.bbclass
+++ b/meta/classes/sanity.bbclass
@@ -3,240 +3,240 @@
#
def raise_sanity_error(msg):
- bb.fatal(""" Poky's config sanity checker detected a potential misconfiguration.
- Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
- Following is the list of potential problems / advisories:
-
- %s""" % msg)
+ bb.fatal(""" Poky's config sanity checker detected a potential misconfiguration.
+ Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
+ Following is the list of potential problems / advisories:
+
+ %s""" % msg)
def check_conf_exists(fn, data):
- bbpath = []
- fn = bb.data.expand(fn, data)
- vbbpath = bb.data.getVar("BBPATH", data)
- if vbbpath:
- bbpath += vbbpath.split(":")
- for p in bbpath:
- currname = os.path.join(bb.data.expand(p, data), fn)
- if os.access(currname, os.R_OK):
- return True
- return False
+ bbpath = []
+ fn = bb.data.expand(fn, data)
+ vbbpath = bb.data.getVar("BBPATH", data)
+ if vbbpath:
+ bbpath += vbbpath.split(":")
+ for p in bbpath:
+ currname = os.path.join(bb.data.expand(p, data), fn)
+ if os.access(currname, os.R_OK):
+ return True
+ return False
def check_sanity(e):
- from bb import note, error, data, __version__
-
- try:
- from distutils.version import LooseVersion
- except ImportError:
- def LooseVersion(v): print "WARNING: sanity.bbclass can't compare versions without python-distutils"; return 1
- import commands
-
- # Check the bitbake version meets minimum requirements
- minversion = data.getVar('BB_MIN_VERSION', e.data , True)
- if not minversion:
- # Hack: BB_MIN_VERSION hasn't been parsed yet so return
- # and wait for the next call
- print "Foo %s" % minversion
- return
-
- if 0 == os.getuid():
- raise_sanity_error("Do not use Bitbake as root.")
-
- messages = ""
-
- # Check the Python version, we now use Python 2.6 features in
- # various classes
- import sys
- if sys.hexversion < 0x020600F0:
- messages = messages + 'Poky requires at least Python 2.6 to run. Please update your Python interpreter.\n'
-
- if (LooseVersion(__version__) < LooseVersion(minversion)):
- messages = messages + 'Bitbake version %s is required and version %s was found\n' % (minversion, __version__)
-
- # Check TARGET_ARCH is set
- if data.getVar('TARGET_ARCH', e.data, True) == 'INVALID':
- messages = messages + 'Please set TARGET_ARCH directly, or choose a MACHINE or DISTRO that does so.\n'
-
- # Check TARGET_OS is set
- if data.getVar('TARGET_OS', e.data, True) == 'INVALID':
- messages = messages + 'Please set TARGET_OS directly, or choose a MACHINE or DISTRO that does so.\n'
+ from bb import note, error, data, __version__
+
+ try:
+ from distutils.version import LooseVersion
+ except ImportError:
+ def LooseVersion(v): print "WARNING: sanity.bbclass can't compare versions without python-distutils"; return 1
+ import commands
+
+ # Check the bitbake version meets minimum requirements
+ minversion = data.getVar('BB_MIN_VERSION', e.data , True)
+ if not minversion:
+ # Hack: BB_MIN_VERSION hasn't been parsed yet so return
+ # and wait for the next call
+ print "Foo %s" % minversion
+ return
+
+ if 0 == os.getuid():
+ raise_sanity_error("Do not use Bitbake as root.")
+
+ messages = ""
+
+ # Check the Python version, we now use Python 2.6 features in
+ # various classes
+ import sys
+ if sys.hexversion < 0x020600F0:
+ messages = messages + 'Poky requires at least Python 2.6 to run. Please update your Python interpreter.\n'
+
+ if (LooseVersion(__version__) < LooseVersion(minversion)):
+ messages = messages + 'Bitbake version %s is required and version %s was found\n' % (minversion, __version__)
+
+ # Check TARGET_ARCH is set
+ if data.getVar('TARGET_ARCH', e.data, True) == 'INVALID':
+ messages = messages + 'Please set TARGET_ARCH directly, or choose a MACHINE or DISTRO that does so.\n'
+
+ # Check TARGET_OS is set
+ if data.getVar('TARGET_OS', e.data, True) == 'INVALID':
+ messages = messages + 'Please set TARGET_OS directly, or choose a MACHINE or DISTRO that does so.\n'
# Check we are using a valid lacal.conf
current_conf = data.getVar('CONF_VERSION', e.data, True)
conf_version = data.getVar('POKY_CONF_VERSION', e.data, True)
if current_conf != conf_version:
- messages = messages + "Poky has noticed your version of local.conf was generated from an older version of local.conf.sample and there have been updates made to this file. Please compare the two files and merge any changes before continuing.\nMatching the version numbers will remove this message.\n\"meld conf/local.conf conf/local.conf.sample\" is a good way to visualise the changes.\n"
+ messages = messages + "Poky has noticed your version of local.conf was generated from an older version of local.conf.sample and there have been updates made to this file. Please compare the two files and merge any changes before continuing.\nMatching the version numbers will remove this message.\n\"meld conf/local.conf conf/local.conf.sample\" is a good way to visualise the changes.\n"
# Check bblayers.conf is valid
current_lconf = data.getVar('LCONF_VERSION', e.data, True)
lconf_version = data.getVar('LAYER_CONF_VERSION', e.data, True)
if current_lconf != lconf_version:
- messages = messages + "Poky has noticed your version of bblayers.conf was generated from an older version of bblayers.conf.sample and there have been updates made to this file. Please compare the two files and merge any changes before continuing.\nMatching the version numbers will remove this message.\n\"meld conf/bblayers.conf conf/bblayers.conf.sample\" is a good way to visualise the changes.\n"
+ messages = messages + "Poky has noticed your version of bblayers.conf was generated from an older version of bblayers.conf.sample and there have been updates made to this file. Please compare the two files and merge any changes before continuing.\nMatching the version numbers will remove this message.\n\"meld conf/bblayers.conf conf/bblayers.conf.sample\" is a good way to visualise the changes.\n"
# If we have a site.conf, check it's valid
if check_conf_exists("conf/site.conf", e.data):
- current_sconf = data.getVar('SCONF_VERSION', e.data, True)
- sconf_version = data.getVar('SITE_CONF_VERSION', e.data, True)
- if current_sconf != sconf_version:
- messages = messages + "Poky has noticed your version of site.conf was generated from an older version of site.conf.sample and there have been updates made to this file. Please compare the two files and merge any changes before continuing.\nMatching the version numbers will remove this message.\n\"meld conf/site.conf conf/site.conf.sample\" is a good way to visualise the changes.\n"
-
- assume_provided = data.getVar('ASSUME_PROVIDED', e.data , True).split()
- # Check user doesn't have ASSUME_PROVIDED = instead of += in local.conf
- if "diffstat-native" not in assume_provided:
- messages = messages + 'Please use ASSUME_PROVIDED +=, not ASSUME_PROVIDED = in your local.conf\n'
-
- # Check that the MACHINE is valid, if it is set
- if data.getVar('MACHINE', e.data, True):
- if not check_conf_exists("conf/machine/${MACHINE}.conf", e.data):
- messages = messages + 'Please set a valid MACHINE in your local.conf\n'
-
- # Check that the DISTRO is valid
- # need to take into account DISTRO renaming DISTRO
- if not ( check_conf_exists("conf/distro/${DISTRO}.conf", e.data) or check_conf_exists("conf/distro/include/${DISTRO}.inc", e.data) ):
- messages = messages + "DISTRO '%s' not found. Please set a valid DISTRO in your local.conf\n" % data.getVar("DISTRO", e.data, True )
-
- missing = ""
-
- if not check_app_exists("${MAKE}", e.data):
- missing = missing + "GNU make,"
-
- if not check_app_exists('${BUILD_PREFIX}gcc', e.data):
- missing = missing + "C Compiler (%sgcc)," % data.getVar("BUILD_PREFIX", e.data, True)
-
- if not check_app_exists('${BUILD_PREFIX}g++', e.data):
- missing = missing + "C++ Compiler (%sg++)," % data.getVar("BUILD_PREFIX", e.data, True)
-
- required_utilities = "patch help2man diffstat texi2html makeinfo cvs svn bzip2 tar gzip gawk hg chrpath wget"
-
- # qemu-native needs gcc 3.x
- if "qemu-native" not in assume_provided and "gcc3-native" in assume_provided:
- gcc_version = commands.getoutput("${BUILD_PREFIX}gcc --version | head -n 1 | cut -f 3 -d ' '")
-
- if not check_gcc3(e.data) and gcc_version[0] != '3':
- messages = messages + "gcc3-native was in ASSUME_PROVIDED but the gcc-3.x binary can't be found in PATH"
- missing = missing + "gcc-3.x (needed for qemu-native),"
-
- if "qemu-native" in assume_provided:
- if not check_app_exists("qemu-arm", e.data):
- messages = messages + "qemu-native was in ASSUME_PROVIDED but the QEMU binaries (qemu-arm) can't be found in PATH"
-
- if data.getVar('TARGET_ARCH', e.data, True) == "arm":
- # This path is no longer user-readable in modern (very recent) Linux
- try:
- if os.path.exists("/proc/sys/vm/mmap_min_addr"):
- f = file("/proc/sys/vm/mmap_min_addr", "r")
- if (f.read().strip() != "0"):
- messages = messages + "/proc/sys/vm/mmap_min_addr is not 0. This will cause problems with qemu so please fix the value (as root).\n\nTo fix this in later reboots, set vm.mmap_min_addr = 0 in /etc/sysctl.conf.\n"
- f.close()
- except:
- pass
-
- for util in required_utilities.split():
- if not check_app_exists( util, e.data ):
- missing = missing + "%s," % util
-
- if missing != "":
- missing = missing.rstrip(',')
- messages = messages + "Please install following missing utilities: %s\n" % missing
-
- # Check if DISPLAY is set if IMAGETEST is set
- if not data.getVar( 'DISPLAY', e.data, True ) and data.getVar( 'IMAGETEST', e.data, True ) == 'qemu':
- messages = messages + 'qemuimagetest needs a X desktop to start qemu, please set DISPLAY correctly (e.g. DISPLAY=:1.0)\n'
-
- # Ensure we have the binary for TERMCMD, as when patch application fails the error is fairly intimidating
- termcmd = data.getVar("TERMCMD", e.data, True)
- term = termcmd.split()[0]
- if not check_app_exists(term, e.data):
- messages = messages + "The console for use in patch error resolution is not available, please install %s or set TERMCMD and TERMCMDRUN (as documented in local.conf).\n" % term
-
- if os.path.basename(os.readlink('/bin/sh')) == 'dash':
- messages = messages + "Using dash as /bin/sh causes various subtle build problems, please use bash instead (e.g. 'dpkg-reconfigure dash' on an Ubuntu system.\n"
-
- omask = os.umask(022)
- if omask & 0755:
- messages = messages + "Please use a umask which allows a+rx and u+rwx\n"
- os.umask(omask)
-
- oes_bb_conf = data.getVar( 'OES_BITBAKE_CONF', e.data, True )
- if not oes_bb_conf:
- messages = messages + 'You do not include OpenEmbeddeds version of conf/bitbake.conf. This means your environment is misconfigured, in particular check BBPATH.\n'
-
- if data.getVar('SDK_ARCH', e.data, True) == 'i686':
- messages = messages + '"Please set SDKMACHINE to i586. It is currently defaulting to the build machine architecture of i686 and this is known to have issues (see local.conf).\n'
-
- nolibs = data.getVar('NO32LIBS', e.data, True)
- if not nolibs:
- lib32path = '/lib'
- if os.path.exists('/lib64') and os.path.islink('/lib64'):
- lib32path = '/lib32'
-
- if os.path.exists('%s/libc.so.6' % lib32path) and not os.path.exists('/usr/include/gnu/stubs-32.h'):
- messages = messages + "You have a 32-bit libc, but no 32-bit headers. You must install the 32-bit libc headers.\n"
-
- #
- # Check that TMPDIR hasn't changed location since the last time we were run
- #
- tmpdir = data.getVar('TMPDIR', e.data, True)
- checkfile = os.path.join(tmpdir, "saved_tmpdir")
- if os.path.exists(checkfile):
- f = file(checkfile, "r")
- saved_tmpdir = f.read().strip()
- if (saved_tmpdir != tmpdir):
- messages = messages + "Error, TMPDIR has changed location. You need to either move it back to %s or rebuild\n" % saved_tmpdir
- else:
- f = file(checkfile, "w")
- f.write(tmpdir)
- f.close()
-
- #
- # Check the 'ABI' of TMPDIR
- #
- current_abi = data.getVar('OELAYOUT_ABI', e.data, True)
- abifile = data.getVar('SANITY_ABIFILE', e.data, True)
- if os.path.exists(abifile):
- f = file(abifile, "r")
- abi = f.read().strip()
- if not abi.isdigit():
- f = file(abifile, "w")
- f.write(current_abi)
- elif abi == "2" and current_abi == "3":
- bb.note("Converting staging from layout version 2 to layout version 3")
- os.system(bb.data.expand("mv ${TMPDIR}/staging ${TMPDIR}/sysroots", e.data))
- os.system(bb.data.expand("ln -s sysroots ${TMPDIR}/staging", e.data))
- os.system(bb.data.expand("cd ${TMPDIR}/stamps; for i in */*do_populate_staging; do new=`echo $i | sed -e 's/do_populate_staging/do_populate_sysroot/'`; mv $i $new; done", e.data))
- f = file(abifile, "w")
- f.write(current_abi)
- elif abi == "3" and current_abi == "4":
- bb.note("Converting staging layout from version 3 to layout version 4")
- if os.path.exists(bb.data.expand("${STAGING_DIR_NATIVE}${bindir_native}/${MULTIMACH_HOST_SYS}", e.data)):
- os.system(bb.data.expand("mv ${STAGING_DIR_NATIVE}${bindir_native}/${MULTIMACH_HOST_SYS} ${STAGING_BINDIR_CROSS}", e.data))
- os.system(bb.data.expand("ln -s ${STAGING_BINDIR_CROSS} ${STAGING_DIR_NATIVE}${bindir_native}/${MULTIMACH_HOST_SYS}", e.data))
-
- f = file(abifile, "w")
- f.write(current_abi)
- elif abi == "4":
- messages = messages + "Staging layout has changed. The cross directory has been deprecated and cross packages are now built under the native sysroot.\nThis requires a rebuild.\n"
- elif abi == "5" and current_abi == "6":
- bb.note("Converting staging layout from version 5 to layout version 6")
- os.system(bb.data.expand("mv ${TMPDIR}/pstagelogs ${TMPDIR}/sstate-control", e.data))
- f = file(abifile, "w")
- f.write(current_abi)
- elif (abi != current_abi):
- # Code to convert from one ABI to another could go here if possible.
- messages = messages + "Error, TMPDIR has changed ABI (%s to %s) and you need to either rebuild, revert or adjust it at your own risk.\n" % (abi, current_abi)
- else:
- f = file(abifile, "w")
- f.write(current_abi)
- f.close()
-
- oeroot = data.getVar('POKYBASE', e.data)
- if oeroot.find ('+') != -1:
- messages = messages + "Error, you have an invalid character (+) in your POKYBASE directory path. Please more Poky to a directory which doesn't include a +."
- elif oeroot.find (' ') != -1:
- messages = messages + "Error, you have a space in your POKYBASE directory path. Please move Poky to a directory which doesn't include a space."
-
- if messages != "":
- raise_sanity_error(messages)
+ current_sconf = data.getVar('SCONF_VERSION', e.data, True)
+ sconf_version = data.getVar('SITE_CONF_VERSION', e.data, True)
+ if current_sconf != sconf_version:
+ messages = messages + "Poky has noticed your version of site.conf was generated from an older version of site.conf.sample and there have been updates made to this file. Please compare the two files and merge any changes before continuing.\nMatching the version numbers will remove this message.\n\"meld conf/site.conf conf/site.conf.sample\" is a good way to visualise the changes.\n"
+
+ assume_provided = data.getVar('ASSUME_PROVIDED', e.data , True).split()
+ # Check user doesn't have ASSUME_PROVIDED = instead of += in local.conf
+ if "diffstat-native" not in assume_provided:
+ messages = messages + 'Please use ASSUME_PROVIDED +=, not ASSUME_PROVIDED = in your local.conf\n'
+
+ # Check that the MACHINE is valid, if it is set
+ if data.getVar('MACHINE', e.data, True):
+ if not check_conf_exists("conf/machine/${MACHINE}.conf", e.data):
+ messages = messages + 'Please set a valid MACHINE in your local.conf\n'
+
+ # Check that the DISTRO is valid
+ # need to take into account DISTRO renaming DISTRO
+ if not ( check_conf_exists("conf/distro/${DISTRO}.conf", e.data) or check_conf_exists("conf/distro/include/${DISTRO}.inc", e.data) ):
+ messages = messages + "DISTRO '%s' not found. Please set a valid DISTRO in your local.conf\n" % data.getVar("DISTRO", e.data, True )
+
+ missing = ""
+
+ if not check_app_exists("${MAKE}", e.data):
+ missing = missing + "GNU make,"
+
+ if not check_app_exists('${BUILD_PREFIX}gcc', e.data):
+ missing = missing + "C Compiler (%sgcc)," % data.getVar("BUILD_PREFIX", e.data, True)
+
+ if not check_app_exists('${BUILD_PREFIX}g++', e.data):
+ missing = missing + "C++ Compiler (%sg++)," % data.getVar("BUILD_PREFIX", e.data, True)
+
+ required_utilities = "patch help2man diffstat texi2html makeinfo cvs svn bzip2 tar gzip gawk hg chrpath wget"
+
+ # qemu-native needs gcc 3.x
+ if "qemu-native" not in assume_provided and "gcc3-native" in assume_provided:
+ gcc_version = commands.getoutput("${BUILD_PREFIX}gcc --version | head -n 1 | cut -f 3 -d ' '")
+
+ if not check_gcc3(e.data) and gcc_version[0] != '3':
+ messages = messages + "gcc3-native was in ASSUME_PROVIDED but the gcc-3.x binary can't be found in PATH"
+ missing = missing + "gcc-3.x (needed for qemu-native),"
+
+ if "qemu-native" in assume_provided:
+ if not check_app_exists("qemu-arm", e.data):
+ messages = messages + "qemu-native was in ASSUME_PROVIDED but the QEMU binaries (qemu-arm) can't be found in PATH"
+
+ if data.getVar('TARGET_ARCH', e.data, True) == "arm":
+ # This path is no longer user-readable in modern (very recent) Linux
+ try:
+ if os.path.exists("/proc/sys/vm/mmap_min_addr"):
+ f = file("/proc/sys/vm/mmap_min_addr", "r")
+ if (f.read().strip() != "0"):
+ messages = messages + "/proc/sys/vm/mmap_min_addr is not 0. This will cause problems with qemu so please fix the value (as root).\n\nTo fix this in later reboots, set vm.mmap_min_addr = 0 in /etc/sysctl.conf.\n"
+ f.close()
+ except:
+ pass
+
+ for util in required_utilities.split():
+ if not check_app_exists( util, e.data ):
+ missing = missing + "%s," % util
+
+ if missing != "":
+ missing = missing.rstrip(',')
+ messages = messages + "Please install following missing utilities: %s\n" % missing
+
+ # Check if DISPLAY is set if IMAGETEST is set
+ if not data.getVar( 'DISPLAY', e.data, True ) and data.getVar( 'IMAGETEST', e.data, True ) == 'qemu':
+ messages = messages + 'qemuimagetest needs a X desktop to start qemu, please set DISPLAY correctly (e.g. DISPLAY=:1.0)\n'
+
+ # Ensure we have the binary for TERMCMD, as when patch application fails the error is fairly intimidating
+ termcmd = data.getVar("TERMCMD", e.data, True)
+ term = termcmd.split()[0]
+ if not check_app_exists(term, e.data):
+ messages = messages + "The console for use in patch error resolution is not available, please install %s or set TERMCMD and TERMCMDRUN (as documented in local.conf).\n" % term
+
+ if os.path.basename(os.readlink('/bin/sh')) == 'dash':
+ messages = messages + "Using dash as /bin/sh causes various subtle build problems, please use bash instead (e.g. 'dpkg-reconfigure dash' on an Ubuntu system.\n"
+
+ omask = os.umask(022)
+ if omask & 0755:
+ messages = messages + "Please use a umask which allows a+rx and u+rwx\n"
+ os.umask(omask)
+
+ oes_bb_conf = data.getVar( 'OES_BITBAKE_CONF', e.data, True )
+ if not oes_bb_conf:
+ messages = messages + 'You do not include OpenEmbeddeds version of conf/bitbake.conf. This means your environment is misconfigured, in particular check BBPATH.\n'
+
+ if data.getVar('SDK_ARCH', e.data, True) == 'i686':
+ messages = messages + '"Please set SDKMACHINE to i586. It is currently defaulting to the build machine architecture of i686 and this is known to have issues (see local.conf).\n'
+
+ nolibs = data.getVar('NO32LIBS', e.data, True)
+ if not nolibs:
+ lib32path = '/lib'
+ if os.path.exists('/lib64') and os.path.islink('/lib64'):
+ lib32path = '/lib32'
+
+ if os.path.exists('%s/libc.so.6' % lib32path) and not os.path.exists('/usr/include/gnu/stubs-32.h'):
+ messages = messages + "You have a 32-bit libc, but no 32-bit headers. You must install the 32-bit libc headers.\n"
+
+ #
+ # Check that TMPDIR hasn't changed location since the last time we were run
+ #
+ tmpdir = data.getVar('TMPDIR', e.data, True)
+ checkfile = os.path.join(tmpdir, "saved_tmpdir")
+ if os.path.exists(checkfile):
+ f = file(checkfile, "r")
+ saved_tmpdir = f.read().strip()
+ if (saved_tmpdir != tmpdir):
+ messages = messages + "Error, TMPDIR has changed location. You need to either move it back to %s or rebuild\n" % saved_tmpdir
+ else:
+ f = file(checkfile, "w")
+ f.write(tmpdir)
+ f.close()
+
+ #
+ # Check the 'ABI' of TMPDIR
+ #
+ current_abi = data.getVar('OELAYOUT_ABI', e.data, True)
+ abifile = data.getVar('SANITY_ABIFILE', e.data, True)
+ if os.path.exists(abifile):
+ f = file(abifile, "r")
+ abi = f.read().strip()
+ if not abi.isdigit():
+ f = file(abifile, "w")
+ f.write(current_abi)
+ elif abi == "2" and current_abi == "3":
+ bb.note("Converting staging from layout version 2 to layout version 3")
+ os.system(bb.data.expand("mv ${TMPDIR}/staging ${TMPDIR}/sysroots", e.data))
+ os.system(bb.data.expand("ln -s sysroots ${TMPDIR}/staging", e.data))
+ os.system(bb.data.expand("cd ${TMPDIR}/stamps; for i in */*do_populate_staging; do new=`echo $i | sed -e 's/do_populate_staging/do_populate_sysroot/'`; mv $i $new; done", e.data))
+ f = file(abifile, "w")
+ f.write(current_abi)
+ elif abi == "3" and current_abi == "4":
+ bb.note("Converting staging layout from version 3 to layout version 4")
+ if os.path.exists(bb.data.expand("${STAGING_DIR_NATIVE}${bindir_native}/${MULTIMACH_HOST_SYS}", e.data)):
+ os.system(bb.data.expand("mv ${STAGING_DIR_NATIVE}${bindir_native}/${MULTIMACH_HOST_SYS} ${STAGING_BINDIR_CROSS}", e.data))
+ os.system(bb.data.expand("ln -s ${STAGING_BINDIR_CROSS} ${STAGING_DIR_NATIVE}${bindir_native}/${MULTIMACH_HOST_SYS}", e.data))
+
+ f = file(abifile, "w")
+ f.write(current_abi)
+ elif abi == "4":
+ messages = messages + "Staging layout has changed. The cross directory has been deprecated and cross packages are now built under the native sysroot.\nThis requires a rebuild.\n"
+ elif abi == "5" and current_abi == "6":
+ bb.note("Converting staging layout from version 5 to layout version 6")
+ os.system(bb.data.expand("mv ${TMPDIR}/pstagelogs ${TMPDIR}/sstate-control", e.data))
+ f = file(abifile, "w")
+ f.write(current_abi)
+ elif (abi != current_abi):
+ # Code to convert from one ABI to another could go here if possible.
+ messages = messages + "Error, TMPDIR has changed ABI (%s to %s) and you need to either rebuild, revert or adjust it at your own risk.\n" % (abi, current_abi)
+ else:
+ f = file(abifile, "w")
+ f.write(current_abi)
+ f.close()
+
+ oeroot = data.getVar('POKYBASE', e.data)
+ if oeroot.find ('+') != -1:
+ messages = messages + "Error, you have an invalid character (+) in your POKYBASE directory path. Please more Poky to a directory which doesn't include a +."
+ elif oeroot.find (' ') != -1:
+ messages = messages + "Error, you have a space in your POKYBASE directory path. Please move Poky to a directory which doesn't include a space."
+
+ if messages != "":
+ raise_sanity_error(messages)
addhandler check_sanity_eventhandler
python check_sanity_eventhandler() {
--
1.7.1
More information about the poky
mailing list