[poky] [PATCH 1/6] patch_2.5.9: clean up the recipe
Nitin A Kamble
nitin.a.kamble at intel.com
Fri Dec 3 11:08:47 PST 2010
Earlier the recipe was using 2.5.4 tar ball and a patch for upgrading to
2.5.9. Replaces these with pointer to 2.5.9 tarball.
Also noted that both 2.5.4 & 2.5.9 are GPLv2 sources.
Updated checksums and license of the recipe
Signed-off-by: Nitin A Kamble <nitin.a.kamble at intel.com>
---
.../recipes-devtools/patch/patch-2.5.9/2.5.9.patch |27399 --------------------
meta/recipes-devtools/patch/patch.inc | 1 -
.../patch/{patch-2.5.9 => patch}/debian.patch | 0
.../{patch-2.5.9 => patch}/global-reject-file.diff | 0
.../patch/{patch-2.5.9 => patch}/install.patch | 0
.../unified-reject-files.diff | 0
meta/recipes-devtools/patch/patch_2.5.9.bb | 13 +-
7 files changed, 6 insertions(+), 27407 deletions(-)
delete mode 100644 meta/recipes-devtools/patch/patch-2.5.9/2.5.9.patch
rename meta/recipes-devtools/patch/{patch-2.5.9 => patch}/debian.patch (100%)
rename meta/recipes-devtools/patch/{patch-2.5.9 => patch}/global-reject-file.diff (100%)
rename meta/recipes-devtools/patch/{patch-2.5.9 => patch}/install.patch (100%)
rename meta/recipes-devtools/patch/{patch-2.5.9 => patch}/unified-reject-files.diff (100%)
diff --git a/meta/recipes-devtools/patch/patch-2.5.9/2.5.9.patch b/meta/recipes-devtools/patch/patch-2.5.9/2.5.9.patch
deleted file mode 100644
index 7b64ecd..0000000
--- a/meta/recipes-devtools/patch/patch-2.5.9/2.5.9.patch
+++ /dev/null
@@ -1,27399 +0,0 @@
-diff -urNd -urNd patch-2.5.4/aclocal.m4 patch-2.5.9/aclocal.m4
---- patch-2.5.4/aclocal.m4 1999-08-29 09:09:30.000000000 -0400
-+++ patch-2.5.9/aclocal.m4 2003-05-19 02:30:52.000000000 -0400
-@@ -1,106 +1,34 @@
--# The following is taken from automake 1.4,
--# except that it prefers the compiler option -Ae to "-Aa -D_HPUX_SOURCE"
--# because only the former supports 64-bit integral types on HP-UX 10.20.
--
--## ----------------------------------------- ##
--## ANSIfy the C compiler whenever possible. ##
--## From Franc,ois Pinard ##
--## ----------------------------------------- ##
--
--# serial 2
-+# backupfile.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-
--# @defmac AC_PROG_CC_STDC
--# @maindex PROG_CC_STDC
--# @ovindex CC
--# If the C compiler in not in ANSI C mode by default, try to add an option
--# to output variable @code{CC} to make it so. This macro tries various
--# options that select ANSI C on some system or another. It considers the
--# compiler to be in ANSI C mode if it handles function prototypes correctly.
--#
--# If you use this macro, you should check after calling it whether the C
--# compiler has been set to accept ANSI C; if not, the shell variable
--# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source
--# code in ANSI C, you can make an un-ANSIfied copy of it by using the
--# program @code{ansi2knr}, which comes with Ghostscript.
--# @end defmac
-+AC_DEFUN([gl_BACKUPFILE],
-+[
-+ dnl Prerequisites of lib/backupfile.c.
-+ AC_REQUIRE([AC_HEADER_DIRENT])
-+ AC_REQUIRE([AC_FUNC_CLOSEDIR_VOID])
-+ AC_CHECK_HEADERS_ONCE(limits.h stdlib.h string.h)
-+ AC_CHECK_DECLS_ONCE(getenv malloc)
-+ jm_CHECK_TYPE_STRUCT_DIRENT_D_INO
-
--AC_DEFUN(AM_PROG_CC_STDC,
--[AC_REQUIRE([AC_PROG_CC])
--AC_BEFORE([$0], [AC_C_INLINE])
--AC_BEFORE([$0], [AC_C_CONST])
--dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require
--dnl a magic option to avoid problems with ANSI preprocessor commands
--dnl like #elif.
--dnl FIXME: can't do this because then AC_AIX won't work due to a
--dnl circular dependency.
--dnl AC_BEFORE([$0], [AC_PROG_CPP])
--AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
--AC_CACHE_VAL(am_cv_prog_cc_stdc,
--[am_cv_prog_cc_stdc=no
--ac_save_CC="$CC"
--# Don't try gcc -ansi; that turns off useful extensions and
--# breaks some systems' header files.
--# AIX -qlanglvl=ansi
--# Ultrix and OSF/1 -std1
--# HP-UX -Aa -D_HPUX_SOURCE
--# SVR4 -Xc -D__EXTENSIONS__
--for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
--do
-- CC="$ac_save_CC $ac_arg"
-- AC_TRY_COMPILE(
--[#include <stdarg.h>
--#include <stdio.h>
--#include <sys/types.h>
--#include <sys/stat.h>
--/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
--struct buf { int x; };
--FILE * (*rcsopen) (struct buf *, struct stat *, int);
--static char *e (p, i)
-- char **p;
-- int i;
--{
-- return p[i];
--}
--static char *f (char * (*g) (char **, int), char **p, ...)
--{
-- char *s;
-- va_list v;
-- va_start (v,p);
-- s = g (p, va_arg (v,int));
-- va_end (v);
-- return s;
--}
--int test (int i, double x);
--struct s1 {int (*f) (int a);};
--struct s2 {int (*f) (double a);};
--int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
--int argc;
--char **argv;
--], [
--return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
--],
--[am_cv_prog_cc_stdc="$ac_arg"; break])
--done
--CC="$ac_save_CC"
--])
--if test -z "$am_cv_prog_cc_stdc"; then
-- AC_MSG_RESULT([none needed])
--else
-- AC_MSG_RESULT($am_cv_prog_cc_stdc)
--fi
--case "x$am_cv_prog_cc_stdc" in
-- x|xno) ;;
-- *) CC="$CC $am_cv_prog_cc_stdc" ;;
--esac
-+ dnl Prerequisites of lib/addext.c.
-+ AC_REQUIRE([jm_AC_DOS])
-+ AC_SYS_LONG_FILE_NAMES
-+ AC_CHECK_HEADERS_ONCE(limits.h string.h unistd.h)
-+ AC_CHECK_FUNCS(pathconf)
- ])
--#serial 2
-+#serial 5
-
- dnl From Jim Meyering.
- dnl
- dnl Check whether struct dirent has a member named d_ino.
- dnl
-
--AC_DEFUN(jm_STRUCT_DIRENT_D_INO,
-+AC_DEFUN([jm_CHECK_TYPE_STRUCT_DIRENT_D_INO],
- [AC_REQUIRE([AC_HEADER_DIRENT])dnl
- AC_CACHE_CHECK([for d_ino member in directory struct],
- jm_cv_struct_dirent_d_ino,
-@@ -130,244 +58,548 @@
- )
- if test $jm_cv_struct_dirent_d_ino = yes; then
- AC_DEFINE(D_INO_IN_DIRENT, 1,
-- [Define if there is a member named d_ino in the struct describing
-- directory headers.])
-+ [Define if there is a member named d_ino in the struct describing
-+ directory headers.])
- fi
- ]
- )
--#serial 3
-+# dirname.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-
--dnl From Paul Eggert.
-+AC_DEFUN([gl_DIRNAME],
-+[
-+ dnl Prerequisites of lib/dirname.h.
-+ AC_REQUIRE([jm_AC_DOS])
-
--# Define HAVE_INTTYPES_H if <inttypes.h> exists,
--# doesn't clash with <sys/types.h>, and declares uintmax_t.
-+ dnl Prerequisites of lib/dirname.c.
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_CHECK_HEADERS_ONCE(string.h)
-
--AC_DEFUN(jm_AC_HEADER_INTTYPES_H,
--[
-- AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
-- [AC_TRY_COMPILE(
-- [#include <sys/types.h>
--#include <inttypes.h>],
-- [uintmax_t i = (uintmax_t) -1;],
-- jm_ac_cv_header_inttypes_h=yes,
-- jm_ac_cv_header_inttypes_h=no)])
-- if test $jm_ac_cv_header_inttypes_h = yes; then
-- AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1,
--[Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
-- and declares uintmax_t. ])
-- fi
-+ dnl Prerequisites of lib/basename.c.
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_CHECK_HEADERS_ONCE(string.h)
-+
-+ dnl Prerequisites of lib/stripslash.c.
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_CHECK_HEADERS_ONCE(string.h)
- ])
- #serial 5
-
--dnl By default, many hosts won't let programs access large files;
--dnl one must use special compiler options to get large-file access to work.
--dnl For more details about this brain damage please see:
--dnl http://www.sas.com/standards/large.file/x_open.20Mar96.html
-+# Define some macros required for proper operation of code in lib/*.c
-+# on MSDOS/Windows systems.
-
--dnl Written by Paul Eggert <eggert at twinsun.com>.
-+# From Jim Meyering.
-
--dnl Internal subroutine of AC_SYS_LARGEFILE.
--dnl AC_SYS_LARGEFILE_FLAGS(FLAGSNAME)
--AC_DEFUN(AC_SYS_LARGEFILE_FLAGS,
-- [AC_CACHE_CHECK([for $1 value to request large file support],
-- ac_cv_sys_largefile_$1,
-- [ac_cv_sys_largefile_$1=`($GETCONF LFS_$1) 2>/dev/null` || {
-- ac_cv_sys_largefile_$1=no
-- ifelse($1, CFLAGS,
-- [case "$host_os" in
-- # IRIX 6.2 and later require cc -n32.
--changequote(, )dnl
-- irix6.[2-9]* | irix6.1[0-9]* | irix[7-9].* | irix[1-9][0-9]*)
--changequote([, ])dnl
-- if test "$GCC" != yes; then
-- ac_cv_sys_largefile_CFLAGS=-n32
-- fi
-- ac_save_CC="$CC"
-- CC="$CC $ac_cv_sys_largefile_CFLAGS"
-- AC_TRY_LINK(, , , ac_cv_sys_largefile_CFLAGS=no)
-- CC="$ac_save_CC"
-- esac])
-- }])])
-+AC_DEFUN([jm_AC_DOS],
-+ [
-+ AC_CACHE_CHECK([whether system is Windows or MSDOS], [ac_cv_win_or_dos],
-+ [
-+ AC_TRY_COMPILE([],
-+ [#if !defined _WIN32 && !defined __WIN32__ && !defined __MSDOS__
-+neither MSDOS nor Windows
-+#endif],
-+ [ac_cv_win_or_dos=yes],
-+ [ac_cv_win_or_dos=no])
-+ ])
-
--dnl Internal subroutine of AC_SYS_LARGEFILE.
--dnl AC_SYS_LARGEFILE_SPACE_APPEND(VAR, VAL)
--AC_DEFUN(AC_SYS_LARGEFILE_SPACE_APPEND,
-- [case $2 in
-- no) ;;
-- ?*)
-- case "[$]$1" in
-- '') $1=$2 ;;
-- *) $1=[$]$1' '$2 ;;
-- esac ;;
-- esac])
-+ if test x"$ac_cv_win_or_dos" = xyes; then
-+ ac_fs_accepts_drive_letter_prefix=1
-+ ac_fs_backslash_is_file_name_separator=1
-+ else
-+ ac_fs_accepts_drive_letter_prefix=0
-+ ac_fs_backslash_is_file_name_separator=0
-+ fi
-
--dnl Internal subroutine of AC_SYS_LARGEFILE.
--dnl AC_SYS_LARGEFILE_MACRO_VALUE(C-MACRO, CACHE-VAR, COMMENT, CODE-TO-SET-DEFAULT)
--AC_DEFUN(AC_SYS_LARGEFILE_MACRO_VALUE,
-- [AC_CACHE_CHECK([for $1], $2,
-- [$2=no
--changequote(, )dnl
-- $4
-- for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-- case "$ac_flag" in
-- -D$1)
-- $2=1 ;;
-- -D$1=*)
-- $2=`expr " $ac_flag" : '[^=]*=\(.*\)'` ;;
-- esac
-- done
--changequote([, ])dnl
-- ])
-- if test "[$]$2" != no; then
-- AC_DEFINE_UNQUOTED([$1], [$]$2, [$3])
-- fi])
-+ AH_VERBATIM(FILESYSTEM_PREFIX_LEN,
-+ [#if FILESYSTEM_ACCEPTS_DRIVE_LETTER_PREFIX
-+# define FILESYSTEM_PREFIX_LEN(Filename) \
-+ ((Filename)[0] && (Filename)[1] == ':' ? 2 : 0)
-+#else
-+# define FILESYSTEM_PREFIX_LEN(Filename) 0
-+#endif])
-
--AC_DEFUN(AC_SYS_LARGEFILE,
-- [AC_REQUIRE([AC_CANONICAL_HOST])
-- AC_ARG_ENABLE(largefile,
-- [ --disable-largefile omit support for large files])
-- if test "$enable_largefile" != no; then
-- AC_CHECK_TOOL(GETCONF, getconf)
-- AC_SYS_LARGEFILE_FLAGS(CFLAGS)
-- AC_SYS_LARGEFILE_FLAGS(LDFLAGS)
-- AC_SYS_LARGEFILE_FLAGS(LIBS)
-+ AC_DEFINE_UNQUOTED([FILESYSTEM_ACCEPTS_DRIVE_LETTER_PREFIX],
-+ $ac_fs_accepts_drive_letter_prefix,
-+ [Define on systems for which file names may have a so-called
-+ `drive letter' prefix, define this to compute the length of that
-+ prefix, including the colon.])
-
-- for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-- case "$ac_flag" in
-- no) ;;
-- -D_FILE_OFFSET_BITS=*) ;;
-- -D_LARGEFILE_SOURCE | -D_LARGEFILE_SOURCE=*) ;;
-- -D_LARGE_FILES | -D_LARGE_FILES=*) ;;
-- -D?* | -I?*)
-- AC_SYS_LARGEFILE_SPACE_APPEND(CPPFLAGS, "$ac_flag") ;;
-- *)
-- AC_SYS_LARGEFILE_SPACE_APPEND(CFLAGS, "$ac_flag") ;;
-- esac
-- done
-- AC_SYS_LARGEFILE_SPACE_APPEND(LDFLAGS, "$ac_cv_sys_largefile_LDFLAGS")
-- AC_SYS_LARGEFILE_SPACE_APPEND(LIBS, "$ac_cv_sys_largefile_LIBS")
-- AC_SYS_LARGEFILE_MACRO_VALUE(_FILE_OFFSET_BITS,
-- ac_cv_sys_file_offset_bits,
-- [Number of bits in a file offset, on hosts where this is settable.],
-- [case "$host_os" in
-- # HP-UX 10.20 and later
-- hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-- ac_cv_sys_file_offset_bits=64 ;;
-- esac])
-- AC_SYS_LARGEFILE_MACRO_VALUE(_LARGEFILE_SOURCE,
-- ac_cv_sys_largefile_source,
-- [Define to make fseeko etc. visible, on some hosts.],
-- [case "$host_os" in
-- # HP-UX 10.20 and later
-- hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-- ac_cv_sys_largefile_source=1 ;;
-- esac])
-- AC_SYS_LARGEFILE_MACRO_VALUE(_LARGE_FILES,
-- ac_cv_sys_large_files,
-- [Define for large files, on AIX-style hosts.],
-- [case "$host_os" in
-- # AIX 4.2 and later
-- aix4.[2-9]* | aix4.1[0-9]* | aix[5-9].* | aix[1-9][0-9]*)
-- ac_cv_sys_large_files=1 ;;
-- esac])
-- fi
-+ AH_VERBATIM(ISSLASH,
-+ [#if FILESYSTEM_BACKSLASH_IS_FILE_NAME_SEPARATOR
-+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
-+#else
-+# define ISSLASH(C) ((C) == '/')
-+#endif])
-+
-+ AC_DEFINE_UNQUOTED([FILESYSTEM_BACKSLASH_IS_FILE_NAME_SEPARATOR],
-+ $ac_fs_backslash_is_file_name_separator,
-+ [Define if the backslash character may also serve as a file name
-+ component separator.])
- ])
--#serial 3
-+#serial 7
-+
-+AC_DEFUN([gl_ERROR],
-+[
-+ AC_FUNC_ERROR_AT_LINE
-+ dnl Note: AC_FUNC_ERROR_AT_LINE does AC_LIBSOURCES([error.h, error.c]).
-+ jm_PREREQ_ERROR
-+])
-+
-+# Prerequisites of lib/error.c.
-+AC_DEFUN([jm_PREREQ_ERROR],
-+[
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_REQUIRE([AC_FUNC_VPRINTF])
-+ AC_CHECK_FUNCS(strerror)
-+ AC_CHECK_DECLS([strerror])
-+ AC_FUNC_STRERROR_R
-+])
-+# getopt.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_GETOPT],
-+[
-+ dnl Prerequisites of lib/getopt.c.
-+ AC_CHECK_HEADERS_ONCE(string.h)
-+])
-+# malloc.m4 serial 7
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-
- dnl From Jim Meyering.
- dnl Determine whether malloc accepts 0 as its argument.
- dnl If it doesn't, arrange to use the replacement function.
--dnl
-
--AC_DEFUN(jm_FUNC_MALLOC,
-+AC_DEFUN([jm_FUNC_MALLOC],
- [
-- dnl xmalloc.c requires that this symbol be defined so it doesn't
-- dnl mistakenly use a broken malloc -- as it might if this test were omitted.
-- AC_DEFINE_UNQUOTED(HAVE_DONE_WORKING_MALLOC_CHECK, 1,
-- [Define if the malloc check has been performed. ])
-+ AC_REQUIRE([AC_FUNC_MALLOC])
-+ dnl autoconf < 2.57 used the symbol ac_cv_func_malloc_works.
-+ if test X"$ac_cv_func_malloc_0_nonnull" = Xno || test X"$ac_cv_func_malloc_works" = Xno; then
-+ gl_PREREQ_MALLOC
-+ fi
-+])
-
-- AC_CACHE_CHECK([for working malloc], jm_cv_func_working_malloc,
-- [AC_TRY_RUN([
-- char *malloc ();
-- int
-- main ()
-- {
-- exit (malloc (0) ? 0 : 1);
-- }
-+# Prerequisites of lib/malloc.c.
-+AC_DEFUN([gl_PREREQ_MALLOC], [
-+ :
-+])
-+# mbrtowc.m4 serial 5
-+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Paul Eggert
-+
-+dnl This file can be removed, and jm_FUNC_MBRTOWC replaced with
-+dnl AC_FUNC_MBRTOWC, when autoconf 2.57 can be assumed everywhere.
-+
-+AC_DEFUN([jm_FUNC_MBRTOWC],
-+[
-+ AC_CACHE_CHECK([whether mbrtowc and mbstate_t are properly declared],
-+ jm_cv_func_mbrtowc,
-+ [AC_TRY_LINK(
-+ [#include <wchar.h>],
-+ [mbstate_t state; return ! (sizeof state && mbrtowc);],
-+ jm_cv_func_mbrtowc=yes,
-+ jm_cv_func_mbrtowc=no)])
-+ if test $jm_cv_func_mbrtowc = yes; then
-+ AC_DEFINE(HAVE_MBRTOWC, 1,
-+ [Define to 1 if mbrtowc and mbstate_t are properly declared.])
-+ fi
-+])
-+# mbstate_t.m4 serial 9
-+dnl Copyright (C) 2000, 2001, 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+# From Paul Eggert.
-+
-+# BeOS 5 has <wchar.h> but does not define mbstate_t,
-+# so you can't declare an object of that type.
-+# Check for this incompatibility with Standard C.
-+
-+# AC_TYPE_MBSTATE_T
-+# -----------------
-+AC_DEFUN([AC_TYPE_MBSTATE_T],
-+ [AC_CACHE_CHECK([for mbstate_t], ac_cv_type_mbstate_t,
-+ [AC_COMPILE_IFELSE(
-+ [AC_LANG_PROGRAM(
-+ [AC_INCLUDES_DEFAULT
-+# include <wchar.h>],
-+ [mbstate_t x; return sizeof x;])],
-+ [ac_cv_type_mbstate_t=yes],
-+ [ac_cv_type_mbstate_t=no])])
-+ if test $ac_cv_type_mbstate_t = yes; then
-+ AC_DEFINE([HAVE_MBSTATE_T], 1,
-+ [Define to 1 if <wchar.h> declares mbstate_t.])
-+ else
-+ AC_DEFINE([mbstate_t], int,
-+ [Define to a type if <wchar.h> does not define.])
-+ fi])
-+# memchr.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_FUNC_MEMCHR],
-+[
-+ AC_REPLACE_FUNCS(memchr)
-+ if test $ac_cv_func_memchr = no; then
-+ jm_PREREQ_MEMCHR
-+ fi
-+])
-+
-+# Prerequisites of lib/memchr.c.
-+AC_DEFUN([jm_PREREQ_MEMCHR], [
-+ AC_CHECK_HEADERS_ONCE(limits.h stdlib.h)
-+ AC_CHECK_HEADERS(bp-sym.h)
-+])
-+#serial 1
-+
-+dnl From Mumit Khan and Paul Eggert
-+dnl Determine whether mkdir accepts only one argument instead of the usual two.
-+
-+AC_DEFUN([PATCH_FUNC_MKDIR_TAKES_ONE_ARG],
-+ [AC_CHECK_FUNCS(mkdir)
-+ AC_CACHE_CHECK([whether mkdir takes only one argument],
-+ patch_cv_mkdir_takes_one_arg,
-+ [patch_cv_mkdir_takes_one_arg=no
-+ if test $ac_cv_func_mkdir = yes; then
-+ AC_TRY_COMPILE([
-+#include <sys/types.h>
-+#include <sys/stat.h>
- ],
-- jm_cv_func_working_malloc=yes,
-- jm_cv_func_working_malloc=no,
-- dnl When crosscompiling, assume malloc is broken.
-- jm_cv_func_working_malloc=no)
-+ [mkdir (".", 0);],
-+ ,
-+ [AC_TRY_COMPILE([
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+ ],
-+ [mkdir (".");],
-+ patch_cv_mkdir_takes_one_arg=yes
-+ )]
-+ )
-+ fi
-+ ]
-+ )
-+ if test $patch_cv_mkdir_takes_one_arg = yes; then
-+ AC_DEFINE([MKDIR_TAKES_ONE_ARG], 1,
-+ [Define if mkdir takes only one argument.])
-+ fi
-+ ]
-+)
-+# onceonly.m4 serial 3
-+dnl Copyright (C) 2002, 2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl This file defines some "once only" variants of standard autoconf macros.
-+dnl AC_CHECK_HEADERS_ONCE like AC_CHECK_HEADERS
-+dnl AC_CHECK_FUNCS_ONCE like AC_CHECK_FUNCS
-+dnl AC_CHECK_DECLS_ONCE like AC_CHECK_DECLS
-+dnl AC_REQUIRE([AC_HEADER_STDC]) like AC_HEADER_STDC
-+dnl The advantage is that the check for each of the headers/functions/decls
-+dnl will be put only once into the 'configure' file. It keeps the size of
-+dnl the 'configure' file down, and avoids redundant output when 'configure'
-+dnl is run.
-+dnl The drawback is that the checks cannot be conditionalized. If you write
-+dnl if some_condition; then gl_CHECK_HEADERS(stdlib.h); fi
-+dnl inside an AC_DEFUNed function, the gl_CHECK_HEADERS macro call expands to
-+dnl empty, and the check will be inserted before the body of the AC_DEFUNed
-+dnl function.
-+
-+dnl Autoconf version 2.57 or newer is recommended.
-+AC_PREREQ(2.54)
-+
-+# AC_CHECK_HEADERS_ONCE(HEADER1 HEADER2 ...) is a once-only variant of
-+# AC_CHECK_HEADERS(HEADER1 HEADER2 ...).
-+AC_DEFUN([AC_CHECK_HEADERS_ONCE], [
-+ :
-+ AC_FOREACH([gl_HEADER_NAME], [$1], [
-+ AC_DEFUN([gl_CHECK_HEADER_]m4_quote(translit(m4_defn([gl_HEADER_NAME]),
-+ [-./], [___])), [
-+ AC_CHECK_HEADERS(gl_HEADER_NAME)
-+ ])
-+ AC_REQUIRE([gl_CHECK_HEADER_]m4_quote(translit(gl_HEADER_NAME,
-+ [-./], [___])))
- ])
-- if test $jm_cv_func_working_malloc = no; then
-- AC_SUBST(LIBOBJS)
-- LIBOBJS="$LIBOBJS malloc.$ac_objext"
-- AC_DEFINE_UNQUOTED(malloc, rpl_malloc,
-- [Define to rpl_malloc if the replacement function should be used.])
-- fi
- ])
--## ------------------------------- ##
--## Check for function prototypes. ##
--## From Franc,ois Pinard ##
--## ------------------------------- ##
-
--# serial 1
-+# AC_CHECK_FUNCS_ONCE(FUNC1 FUNC2 ...) is a once-only variant of
-+# AC_CHECK_FUNCS(FUNC1 FUNC2 ...).
-+AC_DEFUN([AC_CHECK_FUNCS_ONCE], [
-+ :
-+ AC_FOREACH([gl_FUNC_NAME], [$1], [
-+ AC_DEFUN([gl_CHECK_FUNC_]m4_defn([gl_FUNC_NAME]), [
-+ AC_CHECK_FUNCS(m4_defn([gl_FUNC_NAME]))
-+ ])
-+ AC_REQUIRE([gl_CHECK_FUNC_]m4_defn([gl_FUNC_NAME]))
-+ ])
-+])
-
--AC_DEFUN(AM_C_PROTOTYPES,
--[AC_REQUIRE([AM_PROG_CC_STDC])
--AC_REQUIRE([AC_PROG_CPP])
--AC_MSG_CHECKING([for function prototypes])
--if test "$am_cv_prog_cc_stdc" != no; then
-- AC_MSG_RESULT(yes)
-- AC_DEFINE(PROTOTYPES,1,[Define if compiler has function prototypes])
-- U= ANSI2KNR=
--else
-- AC_MSG_RESULT(no)
-- U=_ ANSI2KNR=./ansi2knr
-- # Ensure some checks needed by ansi2knr itself.
-- AC_HEADER_STDC
-- AC_CHECK_HEADERS(string.h)
--fi
--AC_SUBST(U)dnl
--AC_SUBST(ANSI2KNR)dnl
-+# AC_CHECK_DECLS_ONCE(DECL1 DECL2 ...) is a once-only variant of
-+# AC_CHECK_DECLS(DECL1, DECL2, ...).
-+AC_DEFUN([AC_CHECK_DECLS_ONCE], [
-+ :
-+ AC_FOREACH([gl_DECL_NAME], [$1], [
-+ AC_DEFUN([gl_CHECK_DECL_]m4_defn([gl_DECL_NAME]), [
-+ AC_CHECK_DECLS(m4_defn([gl_DECL_NAME]))
-+ ])
-+ AC_REQUIRE([gl_CHECK_DECL_]m4_defn([gl_DECL_NAME]))
-+ ])
- ])
--#serial 3
-+# quote.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_QUOTE],
-+[
-+ dnl Prerequisites of lib/quote.c.
-+ AC_CHECK_HEADERS_ONCE(stddef.h)
-+])
-+# quotearg.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_QUOTEARG],
-+[
-+ dnl Prerequisites of lib/quotearg.c.
-+ AC_CHECK_HEADERS_ONCE(wchar.h wctype.h)
-+ AC_CHECK_FUNCS_ONCE(iswprint mbsinit)
-+ AC_TYPE_MBSTATE_T
-+ jm_FUNC_MBRTOWC
-+])
-+# realloc.m4 serial 7
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-
- dnl From Jim Meyering.
- dnl Determine whether realloc works when both arguments are 0.
- dnl If it doesn't, arrange to use the replacement function.
--dnl
-
--AC_DEFUN(jm_FUNC_REALLOC,
-+AC_DEFUN([jm_FUNC_REALLOC],
- [
-- dnl xmalloc.c requires that this symbol be defined so it doesn't
-- dnl mistakenly use a broken realloc -- as it might if this test were omitted.
-- AC_DEFINE_UNQUOTED(HAVE_DONE_WORKING_REALLOC_CHECK, 1,
-- [Define if the realloc check has been performed. ])
-+ AC_REQUIRE([AC_FUNC_REALLOC])
-+ dnl autoconf < 2.57 used the symbol ac_cv_func_realloc_works.
-+ if test X"$ac_cv_func_realloc_0_nonnull" = Xno || test X"$ac_cv_func_realloc_works" = Xno; then
-+ gl_PREREQ_REALLOC
-+ fi
-+])
-
-- AC_CACHE_CHECK([for working realloc], jm_cv_func_working_realloc,
-- [AC_TRY_RUN([
-- char *realloc ();
-- int
-- main ()
-- {
-- exit (realloc (0, 0) ? 0 : 1);
-- }
-- ],
-- jm_cv_func_working_realloc=yes,
-- jm_cv_func_working_realloc=no,
-- dnl When crosscompiling, assume realloc is broken.
-- jm_cv_func_working_realloc=no)
-- ])
-- if test $jm_cv_func_working_realloc = no; then
-- AC_SUBST(LIBOBJS)
-- LIBOBJS="$LIBOBJS realloc.$ac_objext"
-- AC_DEFINE_UNQUOTED(realloc, rpl_realloc,
-- [Define to rpl_realloc if the replacement function should be used.])
-+# Prerequisites of lib/realloc.c.
-+AC_DEFUN([gl_PREREQ_REALLOC], [
-+ :
-+])
-+# rmdir.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_FUNC_RMDIR],
-+[
-+ AC_REPLACE_FUNCS(rmdir)
-+ if test $ac_cv_func_rmdir = no; then
-+ gl_PREREQ_RMDIR
- fi
- ])
--#serial 2
-+
-+# Prerequisites of lib/rmdir.c.
-+AC_DEFUN([gl_PREREQ_RMDIR], [
-+ AC_REQUIRE([AC_HEADER_STAT])
-+ :
-+])
-+
-+# Check for setmode, DOS style.
-+
-+# Copyright (C) 2001, 2002 Free Software Foundation, Inc.
-+
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+# 02111-1307, USA.
-+
-+AC_DEFUN([AC_FUNC_SETMODE_DOS],
-+ [AC_CHECK_HEADERS(fcntl.h unistd.h)
-+ AC_CACHE_CHECK([for DOS-style setmode],
-+ [ac_cv_func_setmode_dos],
-+ [AC_TRY_LINK(
-+ [#include <io.h>
-+ #if HAVE_FCNTL_H
-+ # include <fcntl.h>
-+ #endif
-+ #if HAVE_UNISTD_H
-+ # include <unistd.h>
-+ #endif],
-+ [int ret = setmode && setmode (1, O_BINARY);],
-+ [ac_cv_func_setmode_dos=yes],
-+ [ac_cv_func_setmode_dos=no])])
-+ if test $ac_cv_func_setmode_dos = yes; then
-+ AC_DEFINE(HAVE_SETMODE_DOS, 1,
-+ [Define to 1 if you have the DOS-style `setmode' function.])
-+ fi])
-+# Check for stdbool.h that conforms to C99.
-+
-+# Copyright (C) 2002-2003 Free Software Foundation, Inc.
-+
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+# 02111-1307, USA.
-+
-+# Prepare for substituting <stdbool.h> if it is not supported.
-+
-+AC_DEFUN([AM_STDBOOL_H],
-+[
-+ AC_REQUIRE([AC_HEADER_STDBOOL])
-+
-+ # Define two additional variables used in the Makefile substitution.
-+
-+ if test "$ac_cv_header_stdbool_h" = yes; then
-+ STDBOOL_H=''
-+ else
-+ STDBOOL_H='stdbool.h'
-+ fi
-+ AC_SUBST([STDBOOL_H])
-+
-+ if test "$ac_cv_type__Bool" = yes; then
-+ HAVE__BOOL=1
-+ else
-+ HAVE__BOOL=0
-+ fi
-+ AC_SUBST([HAVE__BOOL])
-+])
-+
-+# This macro is only needed in autoconf <= 2.54. Newer versions of autoconf
-+# have this macro built-in.
-+
-+AC_DEFUN([AC_HEADER_STDBOOL],
-+ [AC_CACHE_CHECK([for stdbool.h that conforms to C99],
-+ [ac_cv_header_stdbool_h],
-+ [AC_TRY_COMPILE(
-+ [
-+ #include <stdbool.h>
-+ #ifndef bool
-+ "error: bool is not defined"
-+ #endif
-+ #ifndef false
-+ "error: false is not defined"
-+ #endif
-+ #if false
-+ "error: false is not 0"
-+ #endif
-+ #ifndef true
-+ "error: false is not defined"
-+ #endif
-+ #if true != 1
-+ "error: true is not 1"
-+ #endif
-+ #ifndef __bool_true_false_are_defined
-+ "error: __bool_true_false_are_defined is not defined"
-+ #endif
-+
-+ struct s { _Bool s: 1; _Bool t; } s;
-+
-+ char a[true == 1 ? 1 : -1];
-+ char b[false == 0 ? 1 : -1];
-+ char c[__bool_true_false_are_defined == 1 ? 1 : -1];
-+ char d[(bool) -0.5 == true ? 1 : -1];
-+ bool e = &s;
-+ char f[(_Bool) -0.0 == false ? 1 : -1];
-+ char g[true];
-+ char h[sizeof (_Bool)];
-+ char i[sizeof s.t];
-+ ],
-+ [ return !a + !b + !c + !d + !e + !f + !g + !h + !i; ],
-+ [ac_cv_header_stdbool_h=yes],
-+ [ac_cv_header_stdbool_h=no])])
-+ AC_CHECK_TYPES([_Bool])
-+ if test $ac_cv_header_stdbool_h = yes; then
-+ AC_DEFINE(HAVE_STDBOOL_H, 1, [Define to 1 if stdbool.h conforms to C99.])
-+ fi])
-+#serial 7 -*- autoconf -*-
-+
-+dnl From Jim Meyering.
-+dnl
-+dnl See if the glibc *_unlocked I/O macros or functions are available.
-+dnl Use only those *_unlocked macros or functions that are declared
-+dnl (because some of them were declared in Solaris 2.5.1 but were removed
-+dnl in Solaris 2.6, whereas we want binaries built on Solaris 2.5.1 to run
-+dnl on Solaris 2.6).
-+
-+AC_DEFUN([jm_FUNC_GLIBC_UNLOCKED_IO],
-+[
-+ dnl Persuade glibc <stdio.h> to declare fgets_unlocked(), fputs_unlocked()
-+ dnl etc.
-+ AC_REQUIRE([AC_GNU_SOURCE])
-+
-+ AC_CHECK_DECLS_ONCE(
-+ [clearerr_unlocked feof_unlocked ferror_unlocked
-+ fflush_unlocked fgets_unlocked fputc_unlocked fputs_unlocked
-+ fread_unlocked fwrite_unlocked getc_unlocked
-+ getchar_unlocked putc_unlocked putchar_unlocked])
-+])
-+#serial 5
-
- dnl From Jim Meyering
-
-@@ -375,9 +607,9 @@
- dnl usually in <utime.h>.
- dnl Some systems have utime.h but don't declare the struct anywhere.
-
--AC_DEFUN(jm_STRUCT_UTIMBUF,
-+AC_DEFUN([jm_CHECK_TYPE_STRUCT_UTIMBUF],
- [
-- AC_CHECK_HEADERS(utime.h)
-+ AC_CHECK_HEADERS_ONCE(sys/time.h utime.h)
- AC_REQUIRE([AC_HEADER_TIME])
- AC_CACHE_CHECK([for struct utimbuf], fu_cv_sys_struct_utimbuf,
- [AC_TRY_COMPILE(
-@@ -402,8 +634,34 @@
- ])
-
- if test $fu_cv_sys_struct_utimbuf = yes; then
-- AC_DEFINE_UNQUOTED(HAVE_STRUCT_UTIMBUF, 1,
--[Define if struct utimbuf is declared -- usually in <utime.h>.
-- Some systems have utime.h but don't declare the struct anywhere. ])
-+ AC_DEFINE(HAVE_STRUCT_UTIMBUF, 1,
-+ [Define if struct utimbuf is declared -- usually in <utime.h>.
-+ Some systems have utime.h but don't declare the struct anywhere. ])
- fi
- ])
-+# xalloc.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_XALLOC],
-+[
-+ gl_PREREQ_XMALLOC
-+ gl_PREREQ_XSTRDUP
-+])
-+
-+# Prerequisites of lib/xmalloc.c.
-+AC_DEFUN([gl_PREREQ_XMALLOC], [
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_REQUIRE([jm_FUNC_MALLOC])
-+ AC_REQUIRE([jm_FUNC_REALLOC])
-+])
-+
-+# Prerequisites of lib/xstrdup.c.
-+AC_DEFUN([gl_PREREQ_XSTRDUP], [
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_CHECK_HEADERS_ONCE(string.h)
-+])
-diff -urNd -urNd patch-2.5.4/addext.c patch-2.5.9/addext.c
---- patch-2.5.4/addext.c 1999-01-18 12:02:28.000000000 -0500
-+++ patch-2.5.9/addext.c 2003-05-18 01:30:52.000000000 -0400
-@@ -1,5 +1,7 @@
- /* addext.c -- add an extension to a file name
-- Copyright (C) 1990, 1997, 1998, 1999 Free Software Foundation, Inc.
-+
-+ Copyright (C) 1990, 1997, 1998, 1999, 2001, 2003 Free Software
-+ Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -29,8 +31,6 @@
- # define HAVE_LONG_FILE_NAMES 0
- #endif
-
--#include <backupfile.h>
--
- #if HAVE_LIMITS_H
- # include <limits.h>
- #endif
-@@ -49,7 +49,13 @@
- # include <unistd.h>
- #endif
-
--char *base_name PARAMS ((char const *));
-+#include <errno.h>
-+#ifndef errno
-+extern int errno;
-+#endif
-+
-+#include "backupfile.h"
-+#include "dirname.h"
-
- /* Append to FILENAME the extension EXT, unless the result would be too long,
- in which case just append the character E. */
-@@ -58,25 +64,34 @@
- addext (char *filename, char const *ext, int e)
- {
- char *s = base_name (filename);
-- size_t slen = strlen (s), extlen = strlen (ext);
-- long slen_max = -1;
-+ size_t slen = base_len (s);
-+ size_t extlen = strlen (ext);
-+ size_t slen_max = HAVE_LONG_FILE_NAMES ? 255 : _POSIX_NAME_MAX;
-
- #if HAVE_PATHCONF && defined _PC_NAME_MAX
-- if (slen + extlen <= _POSIX_NAME_MAX && ! HAVE_DOS_FILE_NAMES)
-- /* The file name is so short there's no need to call pathconf. */
-- slen_max = _POSIX_NAME_MAX;
-- else if (s == filename)
-- slen_max = pathconf (".", _PC_NAME_MAX);
-- else
-+ if (_POSIX_NAME_MAX < slen + extlen || HAVE_DOS_FILE_NAMES)
- {
-- char c = *s;
-- *s = 0;
-- slen_max = pathconf (filename, _PC_NAME_MAX);
-- *s = c;
-+ /* The new base name is long enough to require a pathconf check. */
-+ long name_max;
-+ errno = 0;
-+ if (s == filename)
-+ name_max = pathconf (".", _PC_NAME_MAX);
-+ else
-+ {
-+ char c = *s;
-+ if (! ISSLASH (c))
-+ *s = 0;
-+ name_max = pathconf (filename, _PC_NAME_MAX);
-+ *s = c;
-+ }
-+ if (0 <= name_max || errno == 0)
-+ {
-+ long size = slen_max = name_max;
-+ if (name_max != size)
-+ slen_max = -1;
-+ }
- }
- #endif
-- if (slen_max < 0)
-- slen_max = HAVE_LONG_FILE_NAMES ? 255 : 14;
-
- if (HAVE_DOS_FILE_NAMES && slen_max <= 12)
- {
-diff -urNd -urNd patch-2.5.4/ansi2knr.1 patch-2.5.9/ansi2knr.1
---- patch-2.5.4/ansi2knr.1 1997-07-04 15:39:00.000000000 -0400
-+++ patch-2.5.9/ansi2knr.1 1969-12-31 19:00:00.000000000 -0500
-@@ -1,36 +0,0 @@
--.TH ANSI2KNR 1 "19 Jan 1996"
--.SH NAME
--ansi2knr \- convert ANSI C to Kernighan & Ritchie C
--.SH SYNOPSIS
--.I ansi2knr
--[--varargs] input_file [output_file]
--.SH DESCRIPTION
--If no output_file is supplied, output goes to stdout.
--.br
--There are no error messages.
--.sp
--.I ansi2knr
--recognizes function definitions by seeing a non-keyword identifier at the left
--margin, followed by a left parenthesis, with a right parenthesis as the last
--character on the line, and with a left brace as the first token on the
--following line (ignoring possible intervening comments). It will recognize a
--multi-line header provided that no intervening line ends with a left or right
--brace or a semicolon. These algorithms ignore whitespace and comments, except
--that the function name must be the first thing on the line.
--.sp
--The following constructs will confuse it:
--.br
-- - Any other construct that starts at the left margin and follows the
--above syntax (such as a macro or function call).
--.br
-- - Some macros that tinker with the syntax of the function header.
--.sp
--The --varargs switch is obsolete, and is recognized only for
--backwards compatibility. The present version of
--.I ansi2knr
--will always attempt to convert a ... argument to va_alist and va_dcl.
--.SH AUTHOR
--L. Peter Deutsch <ghost at aladdin.com> wrote the original ansi2knr and
--continues to maintain the current version; most of the code in the current
--version is his work. ansi2knr also includes contributions by Francois
--Pinard <pinard at iro.umontreal.ca> and Jim Avera <jima at netcom.com>.
-diff -urNd -urNd patch-2.5.4/ansi2knr.c patch-2.5.9/ansi2knr.c
---- patch-2.5.4/ansi2knr.c 1999-04-13 10:44:41.000000000 -0400
-+++ patch-2.5.9/ansi2knr.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,678 +0,0 @@
--/* Copyright (C) 1989, 1997, 1998, 1999 Aladdin Enterprises. All rights reserved. */
--
--/*$Id: ansi2knr.c,v 1.14 1999/04/13 14:44:33 meyering Exp $*/
--/* Convert ANSI C function definitions to K&R ("traditional C") syntax */
--
--/*
--ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY
--WARRANTY. No author or distributor accepts responsibility to anyone for the
--consequences of using it or for whether it serves any particular purpose or
--works at all, unless he says so in writing. Refer to the GNU General Public
--License (the "GPL") for full details.
--
--Everyone is granted permission to copy, modify and redistribute ansi2knr,
--but only under the conditions described in the GPL. A copy of this license
--is supposed to have been given to you along with ansi2knr so you can know
--your rights and responsibilities. It should be in a file named COPYLEFT,
--or, if there is no file named COPYLEFT, a file named COPYING. Among other
--things, the copyright notice and this notice must be preserved on all
--copies.
--
--We explicitly state here what we believe is already implied by the GPL: if
--the ansi2knr program is distributed as a separate set of sources and a
--separate executable file which are aggregated on a storage medium together
--with another program, this in itself does not bring the other program under
--the GPL, nor does the mere fact that such a program or the procedures for
--constructing it invoke the ansi2knr executable bring any other part of the
--program under the GPL.
--*/
--
--/*
-- * Usage:
-- ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]
-- * --filename provides the file name for the #line directive in the output,
-- * overriding input_file (if present).
-- * If no input_file is supplied, input is read from stdin.
-- * If no output_file is supplied, output goes to stdout.
-- * There are no error messages.
-- *
-- * ansi2knr recognizes function definitions by seeing a non-keyword
-- * identifier at the left margin, followed by a left parenthesis,
-- * with a right parenthesis as the last character on the line,
-- * and with a left brace as the first token on the following line
-- * (ignoring possible intervening comments), except that a line
-- * consisting of only
-- * identifier1(identifier2)
-- * will not be considered a function definition unless identifier2 is
-- * the word "void", and a line consisting of
-- * identifier1(identifier2, <<arbitrary>>)
-- * will not be considered a function definition.
-- * ansi2knr will recognize a multi-line header provided
-- * that no intervening line ends with a left or right brace or a semicolon.
-- * These algorithms ignore whitespace and comments, except that
-- * the function name must be the first thing on the line.
-- * The following constructs will confuse it:
-- * - Any other construct that starts at the left margin and
-- * follows the above syntax (such as a macro or function call).
-- * - Some macros that tinker with the syntax of function headers.
-- */
--
--/*
-- * The original and principal author of ansi2knr is L. Peter Deutsch
-- * <ghost at aladdin.com>. Other authors are noted in the change history
-- * that follows (in reverse chronological order):
-- lpd 1999-04-12 added minor fixes from Pavel Roskin
-- <pavel_roskin at geocities.com> for clean compilation with
-- gcc -W -Wall
-- lpd 1999-03-22 added hack to recognize lines consisting of
-- identifier1(identifier2, xxx) as *not* being procedures
-- lpd 1999-02-03 made indentation of preprocessor commands consistent
-- lpd 1999-01-28 fixed two bugs: a '/' in an argument list caused an
-- endless loop; quoted strings within an argument list
-- confused the parser
-- lpd 1999-01-24 added a check for write errors on the output,
-- suggested by Jim Meyering <meyering at ascend.com>
-- lpd 1998-11-09 added further hack to recognize identifier(void)
-- as being a procedure
-- lpd 1998-10-23 added hack to recognize lines consisting of
-- identifier1(identifier2) as *not* being procedures
-- lpd 1997-12-08 made input_file optional; only closes input and/or
-- output file if not stdin or stdout respectively; prints
-- usage message on stderr rather than stdout; adds
-- --filename switch (changes suggested by
-- <ceder at lysator.liu.se>)
-- lpd 1996-01-21 added code to cope with not HAVE_CONFIG_H and with
-- compilers that don't understand void, as suggested by
-- Tom Lane
-- lpd 1996-01-15 changed to require that the first non-comment token
-- on the line following a function header be a left brace,
-- to reduce sensitivity to macros, as suggested by Tom Lane
-- <tgl at sss.pgh.pa.us>
-- lpd 1995-06-22 removed #ifndefs whose sole purpose was to define
-- undefined preprocessor symbols as 0; changed all #ifdefs
-- for configuration symbols to #ifs
-- lpd 1995-04-05 changed copyright notice to make it clear that
-- including ansi2knr in a program does not bring the entire
-- program under the GPL
-- lpd 1994-12-18 added conditionals for systems where ctype macros
-- don't handle 8-bit characters properly, suggested by
-- Francois Pinard <pinard at iro.umontreal.ca>;
-- removed --varargs switch (this is now the default)
-- lpd 1994-10-10 removed CONFIG_BROKETS conditional
-- lpd 1994-07-16 added some conditionals to help GNU `configure',
-- suggested by Francois Pinard <pinard at iro.umontreal.ca>;
-- properly erase prototype args in function parameters,
-- contributed by Jim Avera <jima at netcom.com>;
-- correct error in writeblanks (it shouldn't erase EOLs)
-- lpd 1989-xx-xx original version
-- */
--
--/* Most of the conditionals here are to make ansi2knr work with */
--/* or without the GNU configure machinery. */
--
--#if HAVE_CONFIG_H
--# include <config.h>
--#endif
--
--#include <stdio.h>
--#include <ctype.h>
--
--#if HAVE_CONFIG_H
--
--/*
-- For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h).
-- This will define HAVE_CONFIG_H and so, activate the following lines.
-- */
--
--# if STDC_HEADERS || HAVE_STRING_H
--# include <string.h>
--# else
--# include <strings.h>
--# endif
--
--#else /* not HAVE_CONFIG_H */
--
--/* Otherwise do it the hard way */
--
--# ifdef BSD
--# include <strings.h>
--# else
--# ifdef VMS
-- extern int strlen(), strncmp();
--# else
--# include <string.h>
--# endif
--# endif
--
--#endif /* not HAVE_CONFIG_H */
--
--#if STDC_HEADERS
--# include <stdlib.h>
--#else
--/*
-- malloc and free should be declared in stdlib.h,
-- but if you've got a K&R compiler, they probably aren't.
-- */
--# ifdef MSDOS
--# include <malloc.h>
--# else
--# ifdef VMS
-- extern char *malloc();
-- extern void free();
--# else
-- extern char *malloc();
-- extern int free();
--# endif
--# endif
--
--#endif
--
--/* Define NULL (for *very* old compilers). */
--#ifndef NULL
--# define NULL (0)
--#endif
--
--/*
-- * The ctype macros don't always handle 8-bit characters correctly.
-- * Compensate for this here.
-- */
--#ifdef isascii
--# undef HAVE_ISASCII /* just in case */
--# define HAVE_ISASCII 1
--#else
--#endif
--#if STDC_HEADERS || !HAVE_ISASCII
--# define is_ascii(c) 1
--#else
--# define is_ascii(c) isascii(c)
--#endif
--
--#define is_space(c) (is_ascii(c) && isspace(c))
--#define is_alpha(c) (is_ascii(c) && isalpha(c))
--#define is_alnum(c) (is_ascii(c) && isalnum(c))
--
--/* Scanning macros */
--#define isidchar(ch) (is_alnum(ch) || (ch) == '_')
--#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
--
--/* Forward references */
--char *skipspace();
--char *scanstring();
--int writeblanks();
--int test1();
--int convert1();
--
--/* The main program */
--int
--main(argc, argv)
-- int argc;
-- char *argv[];
--{ FILE *in = stdin;
-- FILE *out = stdout;
-- char *filename = 0;
-- char *program_name = argv[0];
-- char *output_name = 0;
--#define bufsize 5000 /* arbitrary size */
-- char *buf;
-- char *line;
-- char *more;
-- char *usage =
-- "Usage: ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]\n";
-- /*
-- * In previous versions, ansi2knr recognized a --varargs switch.
-- * If this switch was supplied, ansi2knr would attempt to convert
-- * a ... argument to va_alist and va_dcl; if this switch was not
-- * supplied, ansi2knr would simply drop any such arguments.
-- * Now, ansi2knr always does this conversion, and we only
-- * check for this switch for backward compatibility.
-- */
-- int convert_varargs = 1;
-- int output_error;
--
-- while ( argc > 1 && argv[1][0] == '-' ) {
-- if ( !strcmp(argv[1], "--varargs") ) {
-- convert_varargs = 1;
-- argc--;
-- argv++;
-- continue;
-- }
-- if ( !strcmp(argv[1], "--filename") && argc > 2 ) {
-- filename = argv[2];
-- argc -= 2;
-- argv += 2;
-- continue;
-- }
-- fprintf(stderr, "%s: Unrecognized switch: %s\n", program_name,
-- argv[1]);
-- fprintf(stderr, usage);
-- exit(1);
-- }
-- switch ( argc )
-- {
-- default:
-- fprintf(stderr, usage);
-- exit(0);
-- case 3:
-- output_name = argv[2];
-- out = fopen(output_name, "w");
-- if ( out == NULL ) {
-- fprintf(stderr, "%s: Cannot open output file %s\n",
-- program_name, output_name);
-- exit(1);
-- }
-- /* falls through */
-- case 2:
-- in = fopen(argv[1], "r");
-- if ( in == NULL ) {
-- fprintf(stderr, "%s: Cannot open input file %s\n",
-- program_name, argv[1]);
-- exit(1);
-- }
-- if ( filename == 0 )
-- filename = argv[1];
-- /* falls through */
-- case 1:
-- break;
-- }
-- if ( filename )
-- fprintf(out, "#line 1 \"%s\"\n", filename);
-- buf = malloc(bufsize);
-- if ( buf == NULL )
-- {
-- fprintf(stderr, "Unable to allocate read buffer!\n");
-- exit(1);
-- }
-- line = buf;
-- while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL )
-- {
--test: line += strlen(line);
-- switch ( test1(buf) )
-- {
-- case 2: /* a function header */
-- convert1(buf, out, 1, convert_varargs);
-- break;
-- case 1: /* a function */
-- /* Check for a { at the start of the next line. */
-- more = ++line;
--f: if ( line >= buf + (bufsize - 1) ) /* overflow check */
-- goto wl;
-- if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL )
-- goto wl;
-- switch ( *skipspace(more, 1) )
-- {
-- case '{':
-- /* Definitely a function header. */
-- convert1(buf, out, 0, convert_varargs);
-- fputs(more, out);
-- break;
-- case 0:
-- /* The next line was blank or a comment: */
-- /* keep scanning for a non-comment. */
-- line += strlen(line);
-- goto f;
-- default:
-- /* buf isn't a function header, but */
-- /* more might be. */
-- fputs(buf, out);
-- strcpy(buf, more);
-- line = buf;
-- goto test;
-- }
-- break;
-- case -1: /* maybe the start of a function */
-- if ( line != buf + (bufsize - 1) ) /* overflow check */
-- continue;
-- /* falls through */
-- default: /* not a function */
--wl: fputs(buf, out);
-- break;
-- }
-- line = buf;
-- }
-- if ( line != buf )
-- fputs(buf, out);
-- free(buf);
-- if ( output_name ) {
-- output_error = ferror(out);
-- output_error |= fclose(out);
-- } else { /* out == stdout */
-- fflush(out);
-- output_error = ferror(out);
-- }
-- if ( output_error ) {
-- fprintf(stderr, "%s: error writing to %s\n", program_name,
-- (output_name ? output_name : "stdout"));
-- exit(1);
-- }
-- if ( in != stdin )
-- fclose(in);
-- return 0;
--}
--
--/* Skip over whitespace and comments, in either direction. */
--char *
--skipspace(p, dir)
-- register char *p;
-- register int dir; /* 1 for forward, -1 for backward */
--{ for ( ; ; )
-- { while ( is_space(*p) )
-- p += dir;
-- if ( !(*p == '/' && p[dir] == '*') )
-- break;
-- p += dir; p += dir;
-- while ( !(*p == '*' && p[dir] == '/') )
-- { if ( *p == 0 )
-- return p; /* multi-line comment?? */
-- p += dir;
-- }
-- p += dir; p += dir;
-- }
-- return p;
--}
--
--/* Scan over a quoted string, in either direction. */
--char *
--scanstring(p, dir)
-- register char *p;
-- register int dir;
--{
-- for (p += dir; ; p += dir)
-- if (*p == '"' && p[-dir] != '\\')
-- return p + dir;
--}
--
--/*
-- * Write blanks over part of a string.
-- * Don't overwrite end-of-line characters.
-- */
--int
--writeblanks(start, end)
-- char *start;
-- char *end;
--{ char *p;
-- for ( p = start; p < end; p++ )
-- if ( *p != '\r' && *p != '\n' )
-- *p = ' ';
-- return 0;
--}
--
--/*
-- * Test whether the string in buf is a function definition.
-- * The string may contain and/or end with a newline.
-- * Return as follows:
-- * 0 - definitely not a function definition;
-- * 1 - definitely a function definition;
-- * 2 - definitely a function prototype (NOT USED);
-- * -1 - may be the beginning of a function definition,
-- * append another line and look again.
-- * The reason we don't attempt to convert function prototypes is that
-- * Ghostscript's declaration-generating macros look too much like
-- * prototypes, and confuse the algorithms.
-- */
--int
--test1(buf)
-- char *buf;
--{ register char *p = buf;
-- char *bend;
-- char *endfn;
-- int contin;
--
-- if ( !isidfirstchar(*p) )
-- return 0; /* no name at left margin */
-- bend = skipspace(buf + strlen(buf) - 1, -1);
-- switch ( *bend )
-- {
-- case ';': contin = 0 /*2*/; break;
-- case ')': contin = 1; break;
-- case '{': return 0; /* not a function */
-- case '}': return 0; /* not a function */
-- default: contin = -1;
-- }
-- while ( isidchar(*p) )
-- p++;
-- endfn = p;
-- p = skipspace(p, 1);
-- if ( *p++ != '(' )
-- return 0; /* not a function */
-- p = skipspace(p, 1);
-- if ( *p == ')' )
-- return 0; /* no parameters */
-- /* Check that the apparent function name isn't a keyword. */
-- /* We only need to check for keywords that could be followed */
-- /* by a left parenthesis (which, unfortunately, is most of them). */
-- { static char *words[] =
-- { "asm", "auto", "case", "char", "const", "double",
-- "extern", "float", "for", "if", "int", "long",
-- "register", "return", "short", "signed", "sizeof",
-- "static", "switch", "typedef", "unsigned",
-- "void", "volatile", "while", 0
-- };
-- char **key = words;
-- char *kp;
-- unsigned len = endfn - buf;
--
-- while ( (kp = *key) != 0 )
-- { if ( strlen(kp) == len && !strncmp(kp, buf, len) )
-- return 0; /* name is a keyword */
-- key++;
-- }
-- }
-- {
-- char *id = p;
-- int len;
-- /*
-- * Check for identifier1(identifier2) and not
-- * identifier1(void), or identifier1(identifier2, xxxx).
-- */
--
-- while ( isidchar(*p) )
-- p++;
-- len = p - id;
-- p = skipspace(p, 1);
-- if (*p == ',' ||
-- (*p == ')' && (len != 4 || strncmp(id, "void", 4)))
-- )
-- return 0; /* not a function */
-- }
-- /*
-- * If the last significant character was a ), we need to count
-- * parentheses, because it might be part of a formal parameter
-- * that is a procedure.
-- */
-- if (contin > 0) {
-- int level = 0;
--
-- for (p = skipspace(buf, 1); *p; p = skipspace(p + 1, 1))
-- level += (*p == '(' ? 1 : *p == ')' ? -1 : 0);
-- if (level > 0)
-- contin = -1;
-- }
-- return contin;
--}
--
--/* Convert a recognized function definition or header to K&R syntax. */
--int
--convert1(buf, out, header, convert_varargs)
-- char *buf;
-- FILE *out;
-- int header; /* Boolean */
-- int convert_varargs; /* Boolean */
--{ char *endfn;
-- register char *p;
-- /*
-- * The breaks table contains pointers to the beginning and end
-- * of each argument.
-- */
-- char **breaks;
-- unsigned num_breaks = 2; /* for testing */
-- char **btop;
-- char **bp;
-- char **ap;
-- char *vararg = 0;
--
-- /* Pre-ANSI implementations don't agree on whether strchr */
-- /* is called strchr or index, so we open-code it here. */
-- for ( endfn = buf; *(endfn++) != '('; )
-- ;
--top: p = endfn;
-- breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
-- if ( breaks == NULL )
-- { /* Couldn't allocate break table, give up */
-- fprintf(stderr, "Unable to allocate break table!\n");
-- fputs(buf, out);
-- return -1;
-- }
-- btop = breaks + num_breaks * 2 - 2;
-- bp = breaks;
-- /* Parse the argument list */
-- do
-- { int level = 0;
-- char *lp = NULL;
-- char *rp = NULL;
-- char *end = NULL;
--
-- if ( bp >= btop )
-- { /* Filled up break table. */
-- /* Allocate a bigger one and start over. */
-- free((char *)breaks);
-- num_breaks <<= 1;
-- goto top;
-- }
-- *bp++ = p;
-- /* Find the end of the argument */
-- for ( ; end == NULL; p++ )
-- { switch(*p)
-- {
-- case ',':
-- if ( !level ) end = p;
-- break;
-- case '(':
-- if ( !level ) lp = p;
-- level++;
-- break;
-- case ')':
-- if ( --level < 0 ) end = p;
-- else rp = p;
-- break;
-- case '/':
-- if (p[1] == '*')
-- p = skipspace(p, 1) - 1;
-- break;
-- case '"':
-- p = scanstring(p, 1) - 1;
-- break;
-- default:
-- ;
-- }
-- }
-- /* Erase any embedded prototype parameters. */
-- if ( lp && rp )
-- writeblanks(lp + 1, rp);
-- p--; /* back up over terminator */
-- /* Find the name being declared. */
-- /* This is complicated because of procedure and */
-- /* array modifiers. */
-- for ( ; ; )
-- { p = skipspace(p - 1, -1);
-- switch ( *p )
-- {
-- case ']': /* skip array dimension(s) */
-- case ')': /* skip procedure args OR name */
-- { int level = 1;
-- while ( level )
-- switch ( *--p )
-- {
-- case ']': case ')':
-- level++;
-- break;
-- case '[': case '(':
-- level--;
-- break;
-- case '/':
-- if (p > buf && p[-1] == '*')
-- p = skipspace(p, -1) + 1;
-- break;
-- case '"':
-- p = scanstring(p, -1) + 1;
-- break;
-- default: ;
-- }
-- }
-- if ( *p == '(' && *skipspace(p + 1, 1) == '*' )
-- { /* We found the name being declared */
-- while ( !isidfirstchar(*p) )
-- p = skipspace(p, 1) + 1;
-- goto found;
-- }
-- break;
-- default:
-- goto found;
-- }
-- }
--found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' )
-- { if ( convert_varargs )
-- { *bp++ = "va_alist";
-- vararg = p-2;
-- }
-- else
-- { p++;
-- if ( bp == breaks + 1 ) /* sole argument */
-- writeblanks(breaks[0], p);
-- else
-- writeblanks(bp[-1] - 1, p);
-- bp--;
-- }
-- }
-- else
-- { while ( isidchar(*p) ) p--;
-- *bp++ = p+1;
-- }
-- p = end;
-- }
-- while ( *p++ == ',' );
-- *bp = p;
-- /* Make a special check for 'void' arglist */
-- if ( bp == breaks+2 )
-- { p = skipspace(breaks[0], 1);
-- if ( !strncmp(p, "void", 4) )
-- { p = skipspace(p+4, 1);
-- if ( p == breaks[2] - 1 )
-- { bp = breaks; /* yup, pretend arglist is empty */
-- writeblanks(breaks[0], p + 1);
-- }
-- }
-- }
-- /* Put out the function name and left parenthesis. */
-- p = buf;
-- while ( p != endfn ) putc(*p, out), p++;
-- /* Put out the declaration. */
-- if ( header )
-- { fputs(");", out);
-- for ( p = breaks[0]; *p; p++ )
-- if ( *p == '\r' || *p == '\n' )
-- putc(*p, out);
-- }
-- else
-- { for ( ap = breaks+1; ap < bp; ap += 2 )
-- { p = *ap;
-- while ( isidchar(*p) )
-- putc(*p, out), p++;
-- if ( ap < bp - 1 )
-- fputs(", ", out);
-- }
-- fputs(") ", out);
-- /* Put out the argument declarations */
-- for ( ap = breaks+2; ap <= bp; ap += 2 )
-- (*ap)[-1] = ';';
-- if ( vararg != 0 )
-- { *vararg = 0;
-- fputs(breaks[0], out); /* any prior args */
-- fputs("va_dcl", out); /* the final arg */
-- fputs(bp[0], out);
-- }
-- else
-- fputs(breaks[0], out);
-- }
-- free((char *)breaks);
-- return 0;
--}
-diff -urNd -urNd patch-2.5.4/argmatch.c patch-2.5.9/argmatch.c
---- patch-2.5.4/argmatch.c 1999-08-09 19:09:13.000000000 -0400
-+++ patch-2.5.9/argmatch.c 2003-03-10 02:31:50.000000000 -0500
-@@ -1,5 +1,7 @@
- /* argmatch.c -- find a match for a string in an array
-- Copyright (C) 1990, 1998, 1999 Free Software Foundation, Inc.
-+
-+ Copyright (C) 1990, 1998, 1999, 2001, 2002, 2003 Free Software
-+ Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -18,26 +20,24 @@
- /* Written by David MacKenzie <djm at ai.mit.edu>
- Modified by Akim Demaille <demaille at inf.enst.fr> */
-
-+#if HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+/* Specification. */
- #include "argmatch.h"
-
- #include <stdio.h>
--#ifdef STDC_HEADERS
--# include <string.h>
--#endif
--
--#if HAVE_LOCALE_H
--# include <locale.h>
--#endif
-+#include <stdlib.h>
-+#include <string.h>
-
--#if ENABLE_NLS
--# include <libintl.h>
--# define _(Text) gettext (Text)
--#else
--# define _(Text) Text
--#endif
-+#include "gettext.h"
-+#define _(msgid) gettext (msgid)
-
- #include "error.h"
- #include "quotearg.h"
-+#include "quote.h"
-+#include "unlocked-io.h"
-
- /* When reporting an invalid argument, show nonprinting characters
- by using the quoting style ARGMATCH_QUOTING_STYLE. Do not use
-@@ -46,11 +46,7 @@
- # define ARGMATCH_QUOTING_STYLE locale_quoting_style
- #endif
-
--/* The following test is to work around the gross typo in
-- systems like Sony NEWS-OS Release 4.0C, whereby EXIT_FAILURE
-- is defined to 0, not 1. */
--#if !EXIT_FAILURE
--# undef EXIT_FAILURE
-+#ifndef EXIT_FAILURE
- # define EXIT_FAILURE 1
- #endif
-
-@@ -78,7 +74,6 @@
- null-terminated array ARGLIST, return the index in ARGLIST
- of the matched element, else -1 if it does not match any element
- or -2 if it is ambiguous (is a prefix of more than one element).
-- If SENSITIVE, comparison is case sensitive.
-
- If VALLIST is none null, use it to resolve ambiguities limited to
- synonyms, i.e., for
-@@ -86,10 +81,9 @@
- "no", "nope" -> 1
- "y" is a valid argument, for `0', and "n" for `1'. */
-
--static int
--__argmatch_internal (const char *arg, const char *const *arglist,
-- const char *vallist, size_t valsize,
-- int case_sensitive)
-+int
-+argmatch (const char *arg, const char *const *arglist,
-+ const char *vallist, size_t valsize)
- {
- int i; /* Temporary index in ARGLIST. */
- size_t arglen; /* Length of ARG. */
-@@ -101,9 +95,7 @@
- /* Test all elements for either exact match or abbreviated matches. */
- for (i = 0; arglist[i]; i++)
- {
-- if (case_sensitive
-- ? !strncmp (arglist[i], arg, arglen)
-- : !strncasecmp (arglist[i], arg, arglen))
-+ if (!strncmp (arglist[i], arg, arglen))
- {
- if (strlen (arglist[i]) == arglen)
- /* Exact match found. */
-@@ -131,22 +123,6 @@
- return matchind;
- }
-
--/* argmatch - case sensitive version */
--int
--argmatch (const char *arg, const char *const *arglist,
-- const char *vallist, size_t valsize)
--{
-- return __argmatch_internal (arg, arglist, vallist, valsize, 1);
--}
--
--/* argcasematch - case insensitive version */
--int
--argcasematch (const char *arg, const char *const *arglist,
-- const char *vallist, size_t valsize)
--{
-- return __argmatch_internal (arg, arglist, vallist, valsize, 0);
--}
--
- /* Error reporting for argmatch.
- CONTEXT is a description of the type of entity that was being matched.
- VALUE is the invalid value that was given.
-@@ -156,10 +132,11 @@
- argmatch_invalid (const char *context, const char *value, int problem)
- {
- char const *format = (problem == -1
-- ? _("invalid argument %s for `%s'")
-- : _("ambiguous argument %s for `%s'"));
-+ ? _("invalid argument %s for %s")
-+ : _("ambiguous argument %s for %s"));
-
-- error (0, 0, format, quotearg_style (ARGMATCH_QUOTING_STYLE, value), context);
-+ error (0, 0, format, quotearg_n_style (0, ARGMATCH_QUOTING_STYLE, value),
-+ quote_n (1, context));
- }
-
- /* List the valid arguments for argmatch.
-@@ -200,12 +177,9 @@
- __xargmatch_internal (const char *context,
- const char *arg, const char *const *arglist,
- const char *vallist, size_t valsize,
-- int case_sensitive,
- argmatch_exit_fn exit_fn)
- {
-- int res = __argmatch_internal (arg, arglist,
-- vallist, valsize,
-- case_sensitive);
-+ int res = argmatch (arg, arglist, vallist, valsize);
- if (res >= 0)
- /* Success. */
- return res;
-@@ -291,12 +265,12 @@
- }
-
- if ((cp = getenv ("VERSION_CONTROL")))
-- backup_type = XARGCASEMATCH ("$VERSION_CONTROL", cp,
-- backup_args, backup_vals);
-+ backup_type = XARGMATCH ("$VERSION_CONTROL", cp,
-+ backup_args, backup_vals);
-
- if (argc == 2)
-- backup_type = XARGCASEMATCH (program_name, argv[1],
-- backup_args, backup_vals);
-+ backup_type = XARGMATCH (program_name, argv[1],
-+ backup_args, backup_vals);
-
- printf ("The version control is `%s'\n",
- ARGMATCH_TO_ARGUMENT (backup_type, backup_args, backup_vals));
-diff -urNd -urNd patch-2.5.4/argmatch.h patch-2.5.9/argmatch.h
---- patch-2.5.4/argmatch.h 1999-01-25 09:57:22.000000000 -0500
-+++ patch-2.5.9/argmatch.h 2002-11-21 15:15:39.000000000 -0500
-@@ -1,5 +1,5 @@
- /* argmatch.h -- definitions and prototypes for argmatch.c
-- Copyright (C) 1990, 1998, 1999 Free Software Foundation, Inc.
-+ Copyright (C) 1990, 1998, 1999, 2001, 2002 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -21,109 +21,89 @@
- #ifndef ARGMATCH_H_
- # define ARGMATCH_H_ 1
-
--# if HAVE_CONFIG_H
--# include <config.h>
--# endif
-+# include <stddef.h>
-
--# include <sys/types.h>
-+# define ARRAY_CARDINALITY(Array) (sizeof (Array) / sizeof *(Array))
-
--# ifndef PARAMS
--# if PROTOTYPES || (defined (__STDC__) && __STDC__)
--# define PARAMS(args) args
--# else
--# define PARAMS(args) ()
--# endif /* GCC. */
--# endif /* Not PARAMS. */
-+# define ARGMATCH_CONSTRAINT(Arglist, Vallist) \
-+ (ARRAY_CARDINALITY (Arglist) == ARRAY_CARDINALITY (Vallist) + 1)
-
- /* Assert there are as many real arguments as there are values
-- (argument list ends with a NULL guard). There is no execution
-- cost, since it will be statically evalauted to `assert (0)' or
-- `assert (1)'. Unfortunately there is no -Wassert-0. */
-+ (argument list ends with a NULL guard). ARGMATCH_VERIFY is
-+ preferred, since it is guaranteed to be checked at compile-time.
-+ ARGMATCH_ASSERT is for backward compatibility only. */
-
--# undef ARRAY_CARDINALITY
--# define ARRAY_CARDINALITY(Array) (sizeof ((Array)) / sizeof (*(Array)))
-+# define ARGMATCH_VERIFY(Arglist, Vallist) \
-+ struct argmatch_verify \
-+ { \
-+ char argmatch_verify[ARGMATCH_CONSTRAINT(Arglist, Vallist) ? 1 : -1]; \
-+ }
-
--# define ARGMATCH_ASSERT(Arglist, Vallist) \
-- assert (ARRAY_CARDINALITY ((Arglist)) == ARRAY_CARDINALITY ((Vallist)) + 1)
-+# define ARGMATCH_ASSERT(Arglist, Vallist) \
-+ assert (ARGMATCH_CONSTRAINT (Arglist, Vallist))
-
- /* Return the index of the element of ARGLIST (NULL terminated) that
- matches with ARG. If VALLIST is not NULL, then use it to resolve
- false ambiguities (i.e., different matches of ARG but corresponding
- to the same values in VALLIST). */
-
--int argmatch
-- PARAMS ((const char *arg, const char *const *arglist,
-- const char *vallist, size_t valsize));
--int argcasematch
-- PARAMS ((const char *arg, const char *const *arglist,
-- const char *vallist, size_t valsize));
-+int argmatch (char const *arg, char const *const *arglist,
-+ char const *vallist, size_t valsize);
-
- # define ARGMATCH(Arg, Arglist, Vallist) \
-- argmatch ((Arg), (Arglist), (const char *) (Vallist), sizeof (*(Vallist)))
--
--# define ARGCASEMATCH(Arg, Arglist, Vallist) \
-- argcasematch ((Arg), (Arglist), (const char *) (Vallist), sizeof (*(Vallist)))
-+ argmatch (Arg, Arglist, (char const *) (Vallist), sizeof *(Vallist))
-
- /* xargmatch calls this function when it fails. This function should not
- return. By default, this is a function that calls ARGMATCH_DIE which
- in turn defaults to `exit (EXIT_FAILURE)'. */
--typedef void (*argmatch_exit_fn) PARAMS ((void));
-+typedef void (*argmatch_exit_fn) (void);
- extern argmatch_exit_fn argmatch_die;
-
- /* Report on stderr why argmatch failed. Report correct values. */
-
--void argmatch_invalid
-- PARAMS ((const char *context, const char *value, int problem));
-+void argmatch_invalid (char const *context, char const *value, int problem);
-
- /* Left for compatibility with the old name invalid_arg */
-
- # define invalid_arg(Context, Value, Problem) \
-- argmatch_invalid ((Context), (Value), (Problem))
-+ argmatch_invalid (Context, Value, Problem)
-
-
-
- /* Report on stderr the list of possible arguments. */
-
--void argmatch_valid
-- PARAMS ((const char *const *arglist,
-- const char *vallist, size_t valsize));
-+void argmatch_valid (char const *const *arglist,
-+ char const *vallist, size_t valsize);
-
- # define ARGMATCH_VALID(Arglist, Vallist) \
-- argmatch_valid (Arglist, (const char *) Vallist, sizeof (*(Vallist)))
-+ argmatch_valid (Arglist, (char const *) (Vallist), sizeof *(Vallist))
-
-
-
- /* Same as argmatch, but upon failure, reports a explanation on the
- failure, and exits using the function EXIT_FN. */
-
--int __xargmatch_internal
-- PARAMS ((const char *context,
-- const char *arg, const char *const *arglist,
-- const char *vallist, size_t valsize,
-- int case_sensitive, argmatch_exit_fn exit_fn));
-+int __xargmatch_internal (char const *context,
-+ char const *arg, char const *const *arglist,
-+ char const *vallist, size_t valsize,
-+ argmatch_exit_fn exit_fn);
-
- /* Programmer friendly interface to __xargmatch_internal. */
-
--# define XARGMATCH(Context, Arg, Arglist, Vallist) \
-- (Vallist [__xargmatch_internal ((Context), (Arg), (Arglist), \
-- (const char *) (Vallist), \
-- sizeof (*(Vallist)), \
-- 1, argmatch_die)])
--
--# define XARGCASEMATCH(Context, Arg, Arglist, Vallist) \
-- (Vallist [__xargmatch_internal ((Context), (Arg), (Arglist), \
-- (const char *) (Vallist), \
-- sizeof (*(Vallist)), \
-- 0, argmatch_die)])
-+# define XARGMATCH(Context, Arg, Arglist, Vallist) \
-+ ((Vallist) [__xargmatch_internal (Context, Arg, Arglist, \
-+ (char const *) (Vallist), \
-+ sizeof *(Vallist), \
-+ argmatch_die)])
-
- /* Convert a value into a corresponding argument. */
-
--const char *argmatch_to_argument
-- PARAMS ((char const *value, const char *const *arglist,
-- const char *vallist, size_t valsize));
-+char const *argmatch_to_argument (char const *value,
-+ char const *const *arglist,
-+ char const *vallist, size_t valsize);
-
- # define ARGMATCH_TO_ARGUMENT(Value, Arglist, Vallist) \
-- argmatch_to_argument ((char const *) &(Value), (Arglist), \
-- (const char *) (Vallist), sizeof (*(Vallist)))
-+ argmatch_to_argument (Value, Arglist, \
-+ (char const *) (Vallist), sizeof *(Vallist))
-
- #endif /* ARGMATCH_H_ */
-diff -urNd -urNd patch-2.5.4/backupfile.c patch-2.5.9/backupfile.c
---- patch-2.5.4/backupfile.c 1999-01-18 12:02:28.000000000 -0500
-+++ patch-2.5.9/backupfile.c 2002-01-16 17:44:24.000000000 -0500
-@@ -1,5 +1,6 @@
- /* backupfile.c -- make Emacs style backup file names
-- Copyright (C) 1990-1997, 1998, 1999 Free Software Foundation, Inc.
-+ Copyright (C) 1990,91,92,93,94,95,96,97,98,99,2000, 2001, 2002 Free Software
-+ Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -23,9 +24,6 @@
- # include <config.h>
- #endif
-
--#include <argmatch.h>
--#include <backupfile.h>
--
- #include <stdio.h>
- #include <sys/types.h>
- #if HAVE_STRING_H
-@@ -58,17 +56,23 @@
- # define CLOSEDIR(d) closedir (d)
- #endif
-
--#if STDC_HEADERS
-+#if HAVE_STDLIB_H
- # include <stdlib.h>
--#else
--char *malloc ();
- #endif
-
- #ifndef HAVE_DECL_GETENV
-+"this configure-time declaration test was not run"
-+#endif
-+#if !HAVE_DECL_GETENV
- char *getenv ();
- #endif
-
--char *base_name PARAMS ((char const *));
-+#ifndef HAVE_DECL_MALLOC
-+"this configure-time declaration test was not run"
-+#endif
-+#if !HAVE_DECL_MALLOC
-+char *malloc ();
-+#endif
-
- #if HAVE_DIRENT_H || HAVE_NDIR_H || HAVE_SYS_DIR_H || HAVE_SYS_NDIR_H
- # define HAVE_DIR 1
-@@ -91,10 +95,9 @@
- - Its arg may be any int or unsigned int; it need not be an unsigned char.
- - It's guaranteed to evaluate its argument exactly once.
- - It's typically faster.
-- Posix 1003.2-1992 section 2.5.2.1 page 50 lines 1556-1558 says that
-- only '0' through '9' are digits. Prefer ISDIGIT to isdigit unless
-- it's important to use the locale's definition of `digit' even when the
-- host does not conform to Posix. */
-+ POSIX says that only '0' through '9' are digits. Prefer ISDIGIT to
-+ ISDIGIT_LOCALE unless it's important to use the locale's definition
-+ of `digit' even when the host does not conform to POSIX. */
- #define ISDIGIT(c) ((unsigned) (c) - '0' <= 9)
-
- #if D_INO_IN_DIRENT
-@@ -103,6 +106,10 @@
- # define REAL_DIR_ENTRY(dp) 1
- #endif
-
-+#include "argmatch.h"
-+#include "backupfile.h"
-+#include "dirname.h"
-+
- /* The extension added to file names to produce a simple (as opposed
- to numbered) backup file name. */
- const char *simple_backup_suffix = "~";
-@@ -129,29 +136,31 @@
- if (HAVE_DIR && backup_suffix_size_max < numbered_suffix_size_max)
- backup_suffix_size_max = numbered_suffix_size_max;
-
-- s = malloc (file_len + backup_suffix_size_max + numbered_suffix_size_max);
-+ s = malloc (file_len + 1
-+ + backup_suffix_size_max + numbered_suffix_size_max);
- if (s)
- {
-- strcpy (s, file);
--
- #if HAVE_DIR
- if (backup_type != simple)
- {
- int highest_backup;
-- size_t dir_len = base_name (s) - s;
-+ size_t dirlen = dir_len (file);
-
-- strcpy (s + dir_len, ".");
-- highest_backup = max_backup_version (file + dir_len, s);
-+ memcpy (s, file, dirlen);
-+ if (dirlen == FILESYSTEM_PREFIX_LEN (file))
-+ s[dirlen++] = '.';
-+ s[dirlen] = '\0';
-+ highest_backup = max_backup_version (base_name (file), s);
- if (! (backup_type == numbered_existing && highest_backup == 0))
- {
- char *numbered_suffix = s + (file_len + backup_suffix_size_max);
- sprintf (numbered_suffix, ".~%d~", highest_backup + 1);
- suffix = numbered_suffix;
- }
-- strcpy (s, file);
- }
- #endif /* HAVE_DIR */
-
-+ strcpy (s, file);
- addext (s, suffix, '~');
- }
- return s;
-@@ -178,7 +187,7 @@
- return 0;
-
- highest_version = 0;
-- file_name_length = strlen (file);
-+ file_name_length = base_len (file);
-
- while ((dp = readdir (dirp)) != 0)
- {
-diff -urNd -urNd patch-2.5.4/basename.c patch-2.5.9/basename.c
---- patch-2.5.4/basename.c 1999-03-18 11:56:34.000000000 -0500
-+++ patch-2.5.9/basename.c 2001-05-12 11:39:45.000000000 -0400
-@@ -1,5 +1,5 @@
- /* basename.c -- return the last element in a path
-- Copyright (C) 1990, 1998, 1999 Free Software Foundation, Inc.
-+ Copyright (C) 1990, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -19,37 +19,61 @@
- # include <config.h>
- #endif
-
--#ifndef FILESYSTEM_PREFIX_LEN
--# define FILESYSTEM_PREFIX_LEN(Filename) 0
--#endif
--
--#ifndef ISSLASH
--# define ISSLASH(C) ((C) == '/')
-+#if STDC_HEADERS || HAVE_STRING_H
-+# include <string.h>
- #endif
-+#include "dirname.h"
-
- /* In general, we can't use the builtin `basename' function if available,
- since it has different meanings in different environments.
- In some environments the builtin `basename' modifies its argument.
-- If NAME is all slashes, be sure to return `/'. */
-+
-+ Return the address of the last file name component of NAME. If
-+ NAME has no file name components because it is all slashes, return
-+ NAME if it is empty, the address of its last slash otherwise. */
-
- char *
- base_name (char const *name)
- {
-- char const *base = name += FILESYSTEM_PREFIX_LEN (name);
-- int all_slashes = 1;
-+ char const *base = name + FILESYSTEM_PREFIX_LEN (name);
- char const *p;
-
-- for (p = name; *p; p++)
-+ for (p = base; *p; p++)
- {
- if (ISSLASH (*p))
-- base = p + 1;
-- else
-- all_slashes = 0;
-- }
-+ {
-+ /* Treat multiple adjacent slashes like a single slash. */
-+ do p++;
-+ while (ISSLASH (*p));
-
-- /* If NAME is all slashes, arrange to return `/'. */
-- if (*base == '\0' && ISSLASH (*name) && all_slashes)
-- --base;
-+ /* If the file name ends in slash, use the trailing slash as
-+ the basename if no non-slashes have been found. */
-+ if (! *p)
-+ {
-+ if (ISSLASH (*base))
-+ base = p - 1;
-+ break;
-+ }
-+
-+ /* *P is a non-slash preceded by a slash. */
-+ base = p;
-+ }
-+ }
-
- return (char *) base;
- }
-+
-+/* Return the length of of the basename NAME. Typically NAME is the
-+ value returned by base_name. Act like strlen (NAME), except omit
-+ redundant trailing slashes. */
-+
-+size_t
-+base_len (char const *name)
-+{
-+ size_t len;
-+
-+ for (len = strlen (name); 1 < len && ISSLASH (name[len - 1]); len--)
-+ continue;
-+
-+ return len;
-+}
-diff -urNd -urNd patch-2.5.4/basename.h patch-2.5.9/basename.h
---- patch-2.5.4/basename.h 1999-07-07 14:06:40.000000000 -0400
-+++ patch-2.5.9/basename.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1,9 +0,0 @@
--#ifndef PARAMS
--# if defined PROTOTYPES || (defined __STDC__ && __STDC__)
--# define PARAMS(Args) Args
--# else
--# define PARAMS(Args) ()
--# endif
--#endif
--
--char *base_name PARAMS ((char const *name));
-diff -urNd -urNd patch-2.5.4/ChangeLog patch-2.5.9/ChangeLog
---- patch-2.5.4/ChangeLog 1999-08-30 02:38:49.000000000 -0400
-+++ patch-2.5.9/ChangeLog 2003-05-20 12:16:31.000000000 -0400
-@@ -1,3 +1,359 @@
-+2003-05-20 Paul Eggert <eggert at twinsun.com>
-+
-+ * NEWS, configure.ac (AC_INIT): Version 2.5.9 released.
-+
-+ * Makefile.in (HDRS): Add gettext.h.
-+
-+ Use bool, not int, for booleans.
-+
-+ * pch.c (pch_says_nonexistent): Returns int, not bool.
-+
-+ * configure.ac: Add AM_STDBOOL_H.
-+
-+ * Makefile.in (MISC): Add stdbool.h.in.
-+ (stdbool.h): New rule.
-+ (ACINCLUDE_INPUTS): Add stdbool.m4.
-+ (mostlyclean): Remove stdbool.h.
-+ (COMMON): New macro; use it instead of common.h for dependencies.
-+
-+ * common.h: Include <stdbool.h>.
-+ Remove TRUE, FALSE, bool. All uses changed to standard names.
-+
-+ * common.h (reverse, set_time, set_utc):
-+ Use bool, not int, for booleans.
-+ * pch.c (p_strip_trailing_cr, p_pass_comments_through,
-+ prefix_components, pget_line, re_patch,
-+ there_is_another_patch, intuit_diff_type, scan_linenum,
-+ another_hunk, pget_line, pch_timestamp): Likewise.
-+ * inp.h (ifetch): Likewise.
-+ * util.c (move_file, version_controller, version_get, ok_to_reverse,
-+ set_signals): Likewise.
-+ * inp.c (report_revision, get_input_file, plan_a, plan_b, ifetch):
-+ Likewise.
-+ * util.h (ok_to_reverse, version_controller, version_get,
-+ move_file, set_signals): Likewise.
-+ * pch.h (another_hunk, pch_says_nonexistent, pch_timestamp):
-+ Likewise.
-+ * patch.c (struct outstate, numeric_string, make_backups,
-+ backup_if_mismatch, remove_empty_files,
-+ reverse_flag_specified, main, reinitialize_almost_everything,
-+ get_some_switches, apply_hunk, init_output, copy_till):
-+ Likewise.
-+
-+2003-05-18 Paul Eggert <eggert at twinsun.com>
-+
-+ * pch.c (p_pass_comments_through): New var.
-+ (pget_line): Accept new arg for pass_comments_through.
-+ All callers changed.
-+ (there_is_another_patch): Do not suggest -p for ed diffs.
-+ (intuit_diff_type): Check ed command for correct syntax.
-+ Do not set p_strip_trailing_cr merely because a -p line contains a CR.
-+ (get_ed_command_letter): New function.
-+ (do_ed_script): Use it. Do not treat '#' data lines as comments in ed
-+ scripts.
-+
-+ * util.c (move_file):
-+ Don't assume that when 'rename(A,B)' succeeds then A no
-+ longer exists. This is not true of POSIX 1003.1-2001 rename when A
-+ and B are links to the same file.
-+ (fetchname): Fix test for file names with internal spaces.
-+
-+ * version.c: Don't include patchlevel.h.
-+ (version): Use PACKAGE_NAME and PACKAGE_VERSION instead of obsolete
-+ PROGRAM_NAME and PATCH_VERSION.
-+ (copyright_string): Bump to 2003.
-+
-+ * common.h (FILESYSTEM_PREFIX_LEN, ISSLASH):
-+ Remove; now done by 'configure'.
-+ (PROGRAM_NAME): Remove; now done by 'configure' as PACKAGE_NAME.
-+
-+ * patch.c: Do not include <exitfail.h>.
-+ (main): Set xalloc_exit_failure, not exit_failure.
-+ Add "&& !skip_rest_of_patch" when deciding to continue ed scripts.
-+ (option_help): Use PACKAGE_BUGREPORT rather than hardcoding.
-+
-+ * configure.ac (AC_PREREQ): Bump to 2.57.
-+ (AC_GNU_SOURCE): Add, early on.
-+ (gl_BACKUPFILE, gl_DIRNAME, gl_ERROR, gl_FUNC_MEMCHR, gl_FUNC_RMDIR,
-+ gl_GETOPT, gl_PREREQ_XMALLOC, gl_QUOTE, gl_QUOTEARG): Add.
-+ (jm_PREREQ_ADDEXT): Add, with definition.
-+ (jm_PREREQ_DIRNAME, jm_PREREQ_ERROR, jm_PREREQ_MEMCHR,
-+ jm_PREREQ_QUOTEARG): Remove.
-+ (AC_REPLACE_FUNCS): Remove memchr, rename, rmdir).
-+ (jm_FUNC_GLIBC_UNLOCKED_IO, jm_AC_DOS): Add.
-+ (jm_CHECK_TYPE_STRUCT_DIRENT_D_INO): Do not call directly.
-+ (AC_OUTPUT): Use new style, with AC_CONFIG_FILES.
-+
-+ Update to current CVS gnulib.
-+
-+ * exitfail.c, exitfail.h, patchlevel.h, rename.c, m4/c-bs-a.m4,
-+ m4/jm-glibc-io.m4, m4/prereq.m4: Remove.
-+ * m4/backupfile.m4, m4/dirname.m4, m4/dos.m4, m4/getopt.m4,
-+ m4/memchr.m4, m4/onceonly.m4, m4/quote.m4, m4/quotearg.m4,
-+ m4/rmdir.m4, m4/unlocked-io.m4, m4/xalloc.m4: New files.
-+ * Makefile.in (LIBSRCS): Move error.c here from SRCS.
-+ Remove rename.c.
-+ (OBJS): Remove error.$(OBJEXT).
-+ (HDRS): Remove exitfail.h, patchlevel.h.
-+ (ACINCLUDE_INPUTS): Remove c-bs-a.m4, jm-glibc-io.m4, prereq.m4.
-+ Add backupfile.m4, dirname.m4, dos.m4, getopt.m4, memchr.m4,
-+ onceonly.m4, quote.m4, quotearg.m4, rmdir.m4, unlocked-io.m4,
-+ xalloc.m4.
-+ (patchlevel.h): Remove. All uses removed.
-+ (argmatch.$(OBJEXT), error.$(OBJEXT), quotesys.$(OBJEXT)),
-+ xmalloc.$(OBJEXT)): Depend on gettext.h.
-+ (dirname.$(OBJEXT), quote.$(OBJEXT), strncasecmp.$(OBJEXT)): New rules.
-+ (patch.$(OBJEXT), xmalloc.$(OBJEXT)): Remove exitfail.h.
-+ (rename.$(OBJEXT)): Remove.
-+ (version.$(OBJEXT)): Remove util.h.
-+ (xmalloc.$(OBJEXT)): Add error.h.
-+
-+2002-11-23 Paul Eggert <eggert at twinsun.com>
-+
-+ * patch.c (main): Don't check for zero-sized file after 'ed'
-+ when skipping patch. From Michael Fedrowitz.
-+
-+2002-06-03 Paul Eggert <eggert at twinsun.com>
-+
-+ * configure.ac (AC_OUTPUT): Use new form, with AC_CONFIG_FILES,
-+ instead of obsolescent form. Patch from Art Haas.
-+
-+ * pch.c (intuit_diff_type): Do not warn about trailing white space
-+ after Prereq: word. Bug reported by Mike Castle.
-+
-+2002-06-02 Paul Eggert <eggert at twinsun.com>
-+
-+ * NEWS, configure.ac (AC_INIT): Version 2.5.8 released.
-+
-+ * README: POSIX.2 -> POSIX.
-+ * inp.c (report_revision): Don't modify 'revision', since
-+ it gets freed later. Bug reported by Mike Castle.
-+
-+2002-05-30 Paul Eggert <eggert at twinsun.com>
-+
-+ * NEWS, configure.ac (AC_INIT): Version 2.5.7 released.
-+
-+ * Makefile.in (MISC): Remove README-alpha.
-+ (patchlevel.h): Depend on configure, not configure.ac.
-+
-+ * INSTALL: Upgrade to Autoconf 2.53 version.
-+
-+2002-05-28 Paul Eggert <eggert at twinsun.com>
-+
-+ * patch.c (end_defined, apply_hunk): Output #endif without
-+ the comment, as POSIX 1003.1-2001 requires.
-+
-+ * pch.c (there_is_another_patch): Flush stderr after perror.
-+
-+ * NEWS, configure.ac (AC_INIT): Version 2.5.6 released.
-+
-+ * strcasecmp.c, strncasecmp.c: New files, taken from fileutils.
-+ * config.guess, config.sub: Remove.
-+ * Makefile.in (LIBSRCS): Add strcasecmp.c, strncasecmp.c.
-+ (MISC): Remove config.guess, config.sub.
-+
-+ The code already assumes C89 or better, so remove K&R stuff.
-+ * common.h (volatile): Remove.
-+ (GENERIC_OBJECT): Remove; all uses changed to 'void'.
-+ (PARAMS): Remove; all uses changed to prototypes.
-+ * configure.ac (AC_PROG_CC_STDC): Add.
-+ * util.c (vararg_start): Remove. All uses changed to va_start.
-+ Always include <stdarg.h>.
-+
-+ * configure.ac (AC_CANONICAL_HOST): Remove.
-+ (AC_REPLACE_FUNCS): Add strncasecmp.
-+ (AC_CHECK_DECLS): Add mktemp.
-+
-+ * patch.c (main): Remove useless prototype decl.
-+ (mktemp): Don't declare if HAVE_DECL_MKTEMP || defined mktemp.
-+ (make_temp): Now accepts char, not int.
-+
-+2002-05-26 Paul Eggert <eggert at twinsun.com>
-+
-+ * patch.c (not_defined): Prepend newline. All uses changed.
-+ (apply_hunk): Fix bug: -D was outputting #ifdef when it should
-+ have been outputting #ifndef. Bug report and partial fix by
-+ Jason Short.
-+
-+ * pch.c (intuit_diff_type): When reading an ed diff, don't use
-+ indent and trailing-CR-ness of "." line; instead, use that of the
-+ command. Bug reported by Anthony Towns; partial fix by Michael
-+ Fedrowitz.
-+ (intuit_diff_type): If the index line exists, don't report a
-+ missing header. Fix by Chip Salzenberg.
-+
-+2002-05-26 Alessandro Rubini <rubini at gnu.org>
-+
-+ * patch.c (locate_hunk): Fixed updating of last_offset.
-+
-+2002-05-25 Paul Eggert <eggert at twinsun.com>
-+
-+ * NEWS, README: Diffutils doc is up to date now.
-+ Bug reporting address is now <bug-patch at gnu.org>.
-+ * README: Describe '--disable-largefile'.
-+
-+ * NEWS-alpha, dirname.c, dirname.h, exitfail.c, exitfail.h,
-+ quote.c, quote.h, unlocked-io.h: New files, taken from diffutils
-+ and fileutils.
-+
-+ * argmatch.c: [STDC_HEADERS]: Include stdlib.h, for 'exit'.
-+
-+ * addext.c, argmatch.c, argmatch.h, backupfile.c, basename.c:
-+ Update from diffutils and fileutils.
-+
-+ * ansi2knr.1, ansi2knr.c: Remove.
-+
-+ * common.h: HAVE_SETMODE && O_BINARY -> HAVE_SETMODE_DOS.
-+ * patch.c (usage): Likewise.
-+ * pch.c (open_patch_file): Likewise.
-+
-+ * configure.ac: Renamed from configure.in. Add copyright notice.
-+ (AC_PREREQ): Bump to 2.53.
-+ (AC_INIT): Use 2.5x style.
-+ (AC_CONFIG_SRCDIR): Add.
-+ (PACKAGE, VERSION): Remove.
-+ (AC_C_PROTOTYPES): Use this instead of AM_C_PROTOTYPES.
-+ (jm_CHECK_TYPE_STRUCT_UTIMBUF): Use this instead of jm_STRUCT_UTIMBUF.
-+ (jm_PREREQ_ADDEXT, jm_PREREQ_DIRNAME, jm_PREREQ_ERROR,
-+ jm_PREREQ_MEMCHR, jm_PREREQ_QUOTEARG): Add.
-+ (AC_CHECK_DECLS): Add free, getenv, malloc.
-+ (AC_CHECK_FUNCS): Remove setmode.
-+ (AC_FUNC_SETMODE_DOS): Add.
-+ (jm_CHECK_TYPE_STRUCT_DIRENT_D_INO): Use this instead of
-+ jm_STRUCT_DIRENT_D_INO.
-+
-+ * Makefile.in (OBJEXT): New var.
-+ (PACKAGE_NAME): Renamed from PACKAGE. All uses changed.
-+ (PACKAGE_VERSION): Renamed from VERSION. All uses changed.
-+ (U): Remove. All uses of "$U.o" changed to ".$(OBJEXT)".
-+ (LIBSRCS): REmove getopt.c getopt1.c. Add mkdir.c, rmdir.c.
-+ (SRCS): Add dirname.c, exitfail.c, getopt.c, getopt1.c, quote.c.
-+ Remove mkdir.c.
-+ (OBJS): Keep in sync with SRCS.
-+ (HDRS): Remove basename.h.
-+ Add dirname.h, exitfail.h, quote.h, unlocked-io.h.
-+ (MISC, configure, config.hin, patchlevel.h):
-+ configure.ac renamed from configure.in.
-+ (MISC): Add README-alpha. Remove ansi2knr.1, ansi2knr.c.
-+ (.c.$(OBJEXT)): Renamed from .c.o.
-+ (ACINCLUDE_INPUTS): Add c-bs-a.m4, error.m4, jm-glibc-io.m4,
-+ mbstate_t.m4, mkdir.m4, mbrtowc.m4, prereq.m4, setmode.m4.
-+ Remove ccstdc.m4, inttypes_h.m4, largefile.m4, protos.m4.
-+ (mostlyclean): Don't clean ansi2knr.
-+ (ansi2knr.o, ansi2knr): Remove.
-+ Redo dependencies.
-+
-+ * patch.c: Include <exitfail.h>.
-+ (main): Initialize exit_failure.
-+
-+ * patch.man: Update copyright notice.
-+
-+ * pch.c, util.c: Include <dirname.h>, not <basename.h>.
-+
-+ * version.c (copyright_string): Update copyright notice.
-+
-+2002-02-17 Paul Eggert <eggert at twinsun.com>
-+
-+ * partime.c (parse_pattern_letter): Don't overrun buffer if it
-+ contains only alphanumerics. Bug reported by Winni
-+ <Winni470 at gmx.net>.
-+
-+2001-07-28 Paul Eggert <eggert at sic.twinsun.com>
-+
-+ * util.c (fetchname), NEWS:
-+ Allow file names with internal spaces, so long as they
-+ don't contain tabs.
-+
-+ * pch.c (intuit_diff_type): Do not allow Prereq with multiple words.
-+
-+ * configure.in (AC_PREREQ): Bump to 2.50.
-+ (AC_CHECK_FUNCS): Remove fseeko.
-+ (AC_FUNC_FSEEKO): Add.
-+ * Makefile.in (ACINCLUDE_INPUTS):
-+ Remove largefile.m4; no longer needed with Autoconf 2.50.
-+
-+2001-02-07 "Tony E. Bennett" <tbennett at nvidia.com>
-+
-+ * util.c (PERFORCE_CO): New var.
-+ (version_controller): Support Perforce.
-+ * patch.man: Document this.
-+
-+2000-06-30 Paul Eggert <eggert at sic.twinsun.com>
-+
-+ * patch.man: Ignore comment lines.
-+
-+ * NEWS, pch.c: Ignore lines beginning with "#".
-+
-+1999-10-24 Paul Eggert <eggert at twinsun.com>
-+
-+ * pch.c (another_hunk): Report a fatal error if a regular
-+ context hunk's pattern has a different number of unchanged
-+ lines than the replacement.
-+
-+1999-10-18 Paul Eggert <eggert at twinsun.com>
-+
-+ * patch.c (main): If we skipped an ed patch, exit with nonzero status.
-+
-+1999-10-17 Paul Eggert <eggert at twinsun.com>
-+
-+ * patch.c (main): Apply do_ed_script even if dry_run, because
-+ we need to make progress on the patch file.
-+ * pch.c (do_ed_script): If skip_rest_of_patch is nonzero,
-+ gobble up the patch without any other side effect.
-+
-+1999-10-12 Paul Eggert <eggert at twinsun.com>
-+
-+ * NEWS, README: New bug reporting address.
-+ * NEWS: Report change in 2.5.4 that we forgot to document.
-+ * README: Document `configure --disable-largefile'.
-+
-+ * basename.c, COPYING, getopt.c, getopt.h, getopt1.c, m4/largefile.m4:
-+ Update to latest version.
-+ * Makefile.in (basename$U.o): Depend on basename.h.
-+ (config.hin): Depend on $(srcdir)/aclocal.m4.
-+
-+ * ansi2knr.c, maketime.c, mkinstalldirs, partime.c: Fix $Id.
-+
-+ FreeBSD has an unrelated setmode function; work around this.
-+ * common.h (binary_transput): Don't declare unless O_BINARY.
-+ * patch.c (option_help, get_some_switches):
-+ Don't use setmode unless O_BINARY.
-+ * pch.c (open_patch_file): Don't invoke setmode unless O_BINARY.
-+
-+ Fix incompatiblities with error.c.
-+ * common.h (program_name): Now XTERN char *, for compatibility
-+ with error.c. All uses changed.
-+ (PROGRAM_NAME): New macro.
-+ (PARAMS): Use ANSI C version only if defined PROTOTYPES
-+ || (defined __STDC__ && __STDC__), for compatibilty with error.c.
-+ * util.c (vararg_start): Likewise.
-+ * patch.c (program_name): Remove.
-+ (main): Initialize program_name.
-+ * version.c (version): Print PROGRAM_NAME, not program_name.
-+
-+ Accommodate mingw32 port, which has one-argument mkdir (yuck!)
-+ and no geteuid.
-+ * m4/mkdir.m4: New file.
-+ * Makefile.in (ACINCLUDE_INPUTS): Add $(M4DIR)/mkdir.m4.
-+ * configure.in (AC_CHECK_FUNCS): Add geteuid, getuid.
-+ (PATCH_FUNC_MKDIR_TAKES_ONE_ARG): Add.
-+ * common.h (mkdir): Define if mkdir takes one arg.
-+ (geteuid): New macro, if not already defined.
-+
-+1999-10-11 Christopher R. Gabriel <cgabriel at tin.it>
-+
-+ * patch.c (option_help): Updated bug report address
-+ * configure.in (VERSION): Version 2.5.5 released.
-+
-+1999-09-01 Paul Eggert <eggert at twinsun.com>
-+
-+ * patch.c (main): Default simple_backup_suffix to ".orig".
-+
-+1999-10-08 Paul Eggert <eggert at twinsun.com>
-+
-+ * patch.man: Make it clear that `patch -o F' should not be
-+ used if F is one of the files to be patched.
-+
- 1999-08-30 Paul Eggert <eggert at twinsun.com>
-
- Version 2.5.4 fixes a few minor bugs, converts C sources to
-@@ -1910,9 +2266,26 @@
-
- 1984-11-09 Larry Wall <sdcrdcf!lwall>
- * patch.c: Initial revision
--
--Local Variables:
--mode: indented-text
--left-margin: 8
--version-control: never
--end:
-+
-+
-+Copyright (C) 1984, 1985, 1986, 1987, 1988 Larry Wall.
-+
-+Copyright (C) 1989, 1990, 1991, 1992, 1993, 1997, 1998, 1999, 2000, 2001,
-+2002 Free Software Foundation, Inc.
-+
-+This file is part of GNU Patch.
-+
-+This program is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+This program is distributed in the hope that they will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with this program; see the file COPYING. If not, write to
-+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA.
-diff -urNd -urNd patch-2.5.4/common.h patch-2.5.9/common.h
---- patch-2.5.4/common.h 1999-08-30 02:20:08.000000000 -0400
-+++ patch-2.5.9/common.h 2003-05-19 02:57:36.000000000 -0400
-@@ -1,9 +1,11 @@
- /* common definitions for `patch' */
-
--/* $Id: common.h,v 1.20 1999/08/30 06:20:08 eggert Exp $ */
-+/* $Id: common.h,v 1.34 2003/05/19 06:57:36 eggert Exp $ */
-
--/* Copyright 1986, 1988 Larry Wall
-- Copyright 1990, 1991-1993, 1997-1998, 1999 Free Software Foundation, Inc.
-+/* Copyright (C) 1986, 1988 Larry Wall
-+
-+ Copyright (C) 1990, 1991, 1992, 1993, 1997, 1998, 1999, 2002, 2003
-+ Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -24,17 +26,10 @@
- #define DEBUGGING 1
- #endif
-
--/* We must define `volatile' and `const' first (the latter inside config.h),
-- so that they're used consistently in all system includes. */
--#ifndef __STDC__
--# ifndef volatile
--# define volatile
--# endif
--#endif
--
- #include <config.h>
-
- #include <assert.h>
-+#include <stdbool.h>
- #include <stdio.h>
- #include <sys/types.h>
- #include <time.h>
-@@ -73,6 +68,9 @@
- #ifndef S_IRUSR
- #define S_IRUSR (S_IROTH << 6)
- #endif
-+#ifdef MKDIR_TAKES_ONE_ARG
-+# define mkdir(name, mode) ((mkdir) (name))
-+#endif
-
- #if HAVE_LIMITS_H
- # include <limits.h>
-@@ -123,27 +121,6 @@
- #endif
-
-
--#ifndef FILESYSTEM_PREFIX_LEN
--#define FILESYSTEM_PREFIX_LEN(f) 0
--#endif
--
--#ifndef ISSLASH
--#define ISSLASH(c) ((c) == '/')
--#endif
--
--
--/* constants */
--
--/* AIX predefines these. */
--#ifdef TRUE
--#undef TRUE
--#endif
--#ifdef FALSE
--#undef FALSE
--#endif
--#define TRUE 1
--#define FALSE 0
--
- /* handy definitions */
-
- #define strEQ(s1,s2) (!strcmp(s1, s2))
-@@ -151,12 +128,11 @@
-
- /* typedefs */
-
--typedef int bool; /* must promote to itself */
- typedef off_t LINENUM; /* must be signed */
-
- /* globals */
-
--extern char const program_name[];
-+XTERN char *program_name; /* The name this program was run with. */
-
- XTERN char *buf; /* general purpose buffer */
- XTERN size_t bufsize; /* allocated size of buf */
-@@ -190,14 +166,14 @@
- XTERN bool force;
- XTERN bool batch;
- XTERN bool noreverse;
--XTERN int reverse;
-+XTERN bool reverse;
- XTERN enum { DEFAULT_VERBOSITY, SILENT, VERBOSE } verbosity;
- XTERN bool skip_rest_of_patch;
- XTERN int strippath;
- XTERN bool canonicalize;
- XTERN int patch_get;
--XTERN int set_time;
--XTERN int set_utc;
-+XTERN bool set_time;
-+XTERN bool set_utc;
-
- enum diff
- {
-@@ -213,25 +189,11 @@
-
- XTERN char *revision; /* prerequisite revision, if any */
-
--#ifdef __STDC__
--# define GENERIC_OBJECT void
--#else
--# define GENERIC_OBJECT char
--#endif
--
- #if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 6) || __STRICT_ANSI__
- # define __attribute__(x)
- #endif
-
--#ifndef PARAMS
--# ifdef __STDC__
--# define PARAMS(args) args
--# else
--# define PARAMS(args) ()
--# endif
--#endif
--
--void fatal_exit PARAMS ((int)) __attribute__ ((noreturn));
-+void fatal_exit (int) __attribute__ ((noreturn));
-
- #include <errno.h>
- #if !STDC_HEADERS && !defined errno
-@@ -244,7 +206,7 @@
- # if !HAVE_MEMCHR
- # define memcmp(s1, s2, n) bcmp (s1, s2, n)
- # define memcpy(d, s, n) bcopy (s, d, n)
--GENERIC_OBJECT *memchr ();
-+void *memchr ();
- # endif
- #endif
-
-@@ -252,8 +214,8 @@
- # include <stdlib.h>
- #else
- char *getenv ();
--GENERIC_OBJECT *malloc ();
--GENERIC_OBJECT *realloc ();
-+void *malloc ();
-+void *realloc ();
- #endif
-
- #if HAVE_UNISTD_H
-@@ -284,6 +246,13 @@
- # define file_seek fseek
- # define file_tell ftell
- #endif
-+#if ! (HAVE_GETEUID || defined geteuid)
-+# if ! (HAVE_GETUID || defined getuid)
-+# define geteuid() (-1)
-+# else
-+# define geteuid() getuid ()
-+# endif
-+#endif
-
- #if HAVE_FCNTL_H
- # include <fcntl.h>
-@@ -313,7 +282,7 @@
- #define O_TRUNC 0
- #endif
-
--#if HAVE_SETMODE
-+#if HAVE_SETMODE_DOS
- XTERN int binary_transput; /* O_BINARY if binary i/o is desired */
- #else
- # define binary_transput 0
-diff -urNd -urNd patch-2.5.4/config.guess patch-2.5.9/config.guess
---- patch-2.5.4/config.guess 1999-08-05 08:55:17.000000000 -0400
-+++ patch-2.5.9/config.guess 1969-12-31 19:00:00.000000000 -0500
-@@ -1,1088 +0,0 @@
--#! /bin/sh
--# Attempt to guess a canonical system name.
--# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
--# Free Software Foundation, Inc.
--#
--# This file is free software; you can redistribute it and/or modify it
--# under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful, but
--# WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
--# General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--#
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# Written by Per Bothner <bothner at cygnus.com>.
--# The master version of this file is at the FSF in /home/gd/gnu/lib.
--# Please send patches to <autoconf-patches at gnu.org>.
--#
--# This script attempts to guess a canonical system name similar to
--# config.sub. If it succeeds, it prints the system name on stdout, and
--# exits with 0. Otherwise, it exits with 1.
--#
--# The plan is that this can be called by configure scripts if you
--# don't specify an explicit system type (host/target name).
--#
--# Only a few systems have been added to this list; please add others
--# (but try to keep the structure clean).
--#
--
--# Use $HOST_CC if defined. $CC may point to a cross-compiler
--if test x"$CC_FOR_BUILD" = x; then
-- if test x"$HOST_CC" != x; then
-- CC_FOR_BUILD="$HOST_CC"
-- else
-- if test x"$CC" != x; then
-- CC_FOR_BUILD="$CC"
-- else
-- CC_FOR_BUILD=cc
-- fi
-- fi
--fi
--
--
--# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
--# (ghazi at noc.rutgers.edu 8/24/94.)
--if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-- PATH=$PATH:/.attbin ; export PATH
--fi
--
--UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
--UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
--UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
--UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
--
--dummy=dummy-$$
--trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
--
--# Note: order is significant - the case branches are not exclusive.
--
--case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-- alpha:OSF1:*:*)
-- if test $UNAME_RELEASE = "V4.0"; then
-- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-- fi
-- # A Vn.n version is a released version.
-- # A Tn.n version is a released field test version.
-- # A Xn.n version is an unreleased experimental baselevel.
-- # 1.2 uses "1.2" for uname -r.
-- cat <<EOF >$dummy.s
-- .globl main
-- .ent main
--main:
-- .frame \$30,0,\$26,0
-- .prologue 0
-- .long 0x47e03d80 # implver $0
-- lda \$2,259
-- .long 0x47e20c21 # amask $2,$1
-- srl \$1,8,\$2
-- sll \$2,2,\$2
-- sll \$0,3,\$0
-- addl \$1,\$0,\$0
-- addl \$2,\$0,\$0
-- ret \$31,(\$26),1
-- .end main
--EOF
-- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
-- if test "$?" = 0 ; then
-- ./$dummy
-- case "$?" in
-- 7)
-- UNAME_MACHINE="alpha"
-- ;;
-- 15)
-- UNAME_MACHINE="alphaev5"
-- ;;
-- 14)
-- UNAME_MACHINE="alphaev56"
-- ;;
-- 10)
-- UNAME_MACHINE="alphapca56"
-- ;;
-- 16)
-- UNAME_MACHINE="alphaev6"
-- ;;
-- esac
-- fi
-- rm -f $dummy.s $dummy
-- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-- exit 0 ;;
-- Alpha\ *:Windows_NT*:*)
-- # How do we know it's Interix rather than the generic POSIX subsystem?
-- # Should we change UNAME_MACHINE based on the output of uname instead
-- # of the specific Alpha model?
-- echo alpha-pc-interix
-- exit 0 ;;
-- 21064:Windows_NT:50:3)
-- echo alpha-dec-winnt3.5
-- exit 0 ;;
-- Amiga*:UNIX_System_V:4.0:*)
-- echo m68k-cbm-sysv4
-- exit 0;;
-- amiga:NetBSD:*:*)
-- echo m68k-cbm-netbsd${UNAME_RELEASE}
-- exit 0 ;;
-- amiga:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- *:[Aa]miga[Oo][Ss]:*:*)
-- echo ${UNAME_MACHINE}-unknown-amigaos
-- exit 0 ;;
-- arc64:OpenBSD:*:*)
-- echo mips64el-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- arc:OpenBSD:*:*)
-- echo mipsel-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- hkmips:OpenBSD:*:*)
-- echo mips-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- pmax:OpenBSD:*:*)
-- echo mipsel-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- sgi:OpenBSD:*:*)
-- echo mips-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- wgrisc:OpenBSD:*:*)
-- echo mipsel-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-- echo arm-acorn-riscix${UNAME_RELEASE}
-- exit 0;;
-- arm32:NetBSD:*:*)
-- echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-- exit 0 ;;
-- SR2?01:HI-UX/MPP:*:*)
-- echo hppa1.1-hitachi-hiuxmpp
-- exit 0;;
-- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-- # akee at wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-- if test "`(/bin/universe) 2>/dev/null`" = att ; then
-- echo pyramid-pyramid-sysv3
-- else
-- echo pyramid-pyramid-bsd
-- fi
-- exit 0 ;;
-- NILE*:*:*:dcosx)
-- echo pyramid-pyramid-svr4
-- exit 0 ;;
-- sun4H:SunOS:5.*:*)
-- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-- exit 0 ;;
-- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-- exit 0 ;;
-- i86pc:SunOS:5.*:*)
-- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-- exit 0 ;;
-- sun4*:SunOS:6*:*)
-- # According to config.sub, this is the proper way to canonicalize
-- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
-- # it's likely to be more like Solaris than SunOS4.
-- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-- exit 0 ;;
-- sun4*:SunOS:*:*)
-- case "`/usr/bin/arch -k`" in
-- Series*|S4*)
-- UNAME_RELEASE=`uname -v`
-- ;;
-- esac
-- # Japanese Language versions have a version number like `4.1.3-JL'.
-- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-- exit 0 ;;
-- sun3*:SunOS:*:*)
-- echo m68k-sun-sunos${UNAME_RELEASE}
-- exit 0 ;;
-- sun*:*:4.2BSD:*)
-- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-- case "`/bin/arch`" in
-- sun3)
-- echo m68k-sun-sunos${UNAME_RELEASE}
-- ;;
-- sun4)
-- echo sparc-sun-sunos${UNAME_RELEASE}
-- ;;
-- esac
-- exit 0 ;;
-- aushp:SunOS:*:*)
-- echo sparc-auspex-sunos${UNAME_RELEASE}
-- exit 0 ;;
-- atari*:NetBSD:*:*)
-- echo m68k-atari-netbsd${UNAME_RELEASE}
-- exit 0 ;;
-- atari*:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- # The situation for MiNT is a little confusing. The machine name
-- # can be virtually everything (everything which is not
-- # "atarist" or "atariste" at least should have a processor
-- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
-- # to the lowercase version "mint" (or "freemint"). Finally
-- # the system name "TOS" denotes a system which is actually not
-- # MiNT. But MiNT is downward compatible to TOS, so this should
-- # be no problem.
-- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-- echo m68k-atari-mint${UNAME_RELEASE}
-- exit 0 ;;
-- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-- echo m68k-atari-mint${UNAME_RELEASE}
-- exit 0 ;;
-- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-- echo m68k-atari-mint${UNAME_RELEASE}
-- exit 0 ;;
-- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-- echo m68k-milan-mint${UNAME_RELEASE}
-- exit 0 ;;
-- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-- echo m68k-hades-mint${UNAME_RELEASE}
-- exit 0 ;;
-- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-- echo m68k-unknown-mint${UNAME_RELEASE}
-- exit 0 ;;
-- sun3*:NetBSD:*:*)
-- echo m68k-sun-netbsd${UNAME_RELEASE}
-- exit 0 ;;
-- sun3*:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- mac68k:NetBSD:*:*)
-- echo m68k-apple-netbsd${UNAME_RELEASE}
-- exit 0 ;;
-- mac68k:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- mvme68k:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- mvme88k:OpenBSD:*:*)
-- echo m88k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- powerpc:machten:*:*)
-- echo powerpc-apple-machten${UNAME_RELEASE}
-- exit 0 ;;
-- macppc:NetBSD:*:*)
-- echo powerpc-apple-netbsd${UNAME_RELEASE}
-- exit 0 ;;
-- RISC*:Mach:*:*)
-- echo mips-dec-mach_bsd4.3
-- exit 0 ;;
-- RISC*:ULTRIX:*:*)
-- echo mips-dec-ultrix${UNAME_RELEASE}
-- exit 0 ;;
-- VAX*:ULTRIX*:*:*)
-- echo vax-dec-ultrix${UNAME_RELEASE}
-- exit 0 ;;
-- 2020:CLIX:*:* | 2430:CLIX:*:*)
-- echo clipper-intergraph-clix${UNAME_RELEASE}
-- exit 0 ;;
-- mips:*:*:UMIPS | mips:*:*:RISCos)
-- sed 's/^ //' << EOF >$dummy.c
--#ifdef __cplusplus
-- int main (int argc, char *argv[]) {
--#else
-- int main (argc, argv) int argc; char *argv[]; {
--#endif
-- #if defined (host_mips) && defined (MIPSEB)
-- #if defined (SYSTYPE_SYSV)
-- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-- #endif
-- #if defined (SYSTYPE_SVR4)
-- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-- #endif
-- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-- #endif
-- #endif
-- exit (-1);
-- }
--EOF
-- $CC_FOR_BUILD $dummy.c -o $dummy \
-- && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-- && rm $dummy.c $dummy && exit 0
-- rm -f $dummy.c $dummy
-- echo mips-mips-riscos${UNAME_RELEASE}
-- exit 0 ;;
-- Night_Hawk:Power_UNIX:*:*)
-- echo powerpc-harris-powerunix
-- exit 0 ;;
-- m88k:CX/UX:7*:*)
-- echo m88k-harris-cxux7
-- exit 0 ;;
-- m88k:*:4*:R4*)
-- echo m88k-motorola-sysv4
-- exit 0 ;;
-- m88k:*:3*:R3*)
-- echo m88k-motorola-sysv3
-- exit 0 ;;
-- AViiON:dgux:*:*)
-- # DG/UX returns AViiON for all architectures
-- UNAME_PROCESSOR=`/usr/bin/uname -p`
-- if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
-- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
-- -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
-- echo m88k-dg-dgux${UNAME_RELEASE}
-- else
-- echo m88k-dg-dguxbcs${UNAME_RELEASE}
-- fi
-- else echo i586-dg-dgux${UNAME_RELEASE}
-- fi
-- exit 0 ;;
-- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
-- echo m88k-dolphin-sysv3
-- exit 0 ;;
-- M88*:*:R3*:*)
-- # Delta 88k system running SVR3
-- echo m88k-motorola-sysv3
-- exit 0 ;;
-- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-- echo m88k-tektronix-sysv3
-- exit 0 ;;
-- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-- echo m68k-tektronix-bsd
-- exit 0 ;;
-- *:IRIX*:*:*)
-- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-- exit 0 ;;
-- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
-- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
-- i?86:AIX:*:*)
-- echo i386-ibm-aix
-- exit 0 ;;
-- *:AIX:2:3)
-- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-- sed 's/^ //' << EOF >$dummy.c
-- #include <sys/systemcfg.h>
--
-- main()
-- {
-- if (!__power_pc())
-- exit(1);
-- puts("powerpc-ibm-aix3.2.5");
-- exit(0);
-- }
--EOF
-- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
-- rm -f $dummy.c $dummy
-- echo rs6000-ibm-aix3.2.5
-- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-- echo rs6000-ibm-aix3.2.4
-- else
-- echo rs6000-ibm-aix3.2
-- fi
-- exit 0 ;;
-- *:AIX:*:4)
-- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
-- if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
-- IBM_ARCH=rs6000
-- else
-- IBM_ARCH=powerpc
-- fi
-- if [ -x /usr/bin/oslevel ] ; then
-- IBM_REV=`/usr/bin/oslevel`
-- else
-- IBM_REV=4.${UNAME_RELEASE}
-- fi
-- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-- exit 0 ;;
-- *:AIX:*:*)
-- echo rs6000-ibm-aix
-- exit 0 ;;
-- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-- echo romp-ibm-bsd4.4
-- exit 0 ;;
-- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and
-- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
-- exit 0 ;; # report: romp-ibm BSD 4.3
-- *:BOSX:*:*)
-- echo rs6000-bull-bosx
-- exit 0 ;;
-- DPX/2?00:B.O.S.:*:*)
-- echo m68k-bull-sysv3
-- exit 0 ;;
-- 9000/[34]??:4.3bsd:1.*:*)
-- echo m68k-hp-bsd
-- exit 0 ;;
-- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-- echo m68k-hp-bsd4.4
-- exit 0 ;;
-- 9000/[34678]??:HP-UX:*:*)
-- case "${UNAME_MACHINE}" in
-- 9000/31? ) HP_ARCH=m68000 ;;
-- 9000/[34]?? ) HP_ARCH=m68k ;;
-- 9000/[678][0-9][0-9])
-- sed 's/^ //' << EOF >$dummy.c
-- #include <stdlib.h>
-- #include <unistd.h>
--
-- int main ()
-- {
-- #if defined(_SC_KERNEL_BITS)
-- long bits = sysconf(_SC_KERNEL_BITS);
-- #endif
-- long cpu = sysconf (_SC_CPU_VERSION);
--
-- switch (cpu)
-- {
-- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-- case CPU_PA_RISC2_0:
-- #if defined(_SC_KERNEL_BITS)
-- switch (bits)
-- {
-- case 64: puts ("hppa2.0w"); break;
-- case 32: puts ("hppa2.0n"); break;
-- default: puts ("hppa2.0"); break;
-- } break;
-- #else /* !defined(_SC_KERNEL_BITS) */
-- puts ("hppa2.0"); break;
-- #endif
-- default: puts ("hppa1.0"); break;
-- }
-- exit (0);
-- }
--EOF
-- ($CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
-- rm -f $dummy.c $dummy
-- esac
-- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-- exit 0 ;;
-- 3050*:HI-UX:*:*)
-- sed 's/^ //' << EOF >$dummy.c
-- #include <unistd.h>
-- int
-- main ()
-- {
-- long cpu = sysconf (_SC_CPU_VERSION);
-- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
-- results, however. */
-- if (CPU_IS_PA_RISC (cpu))
-- {
-- switch (cpu)
-- {
-- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-- default: puts ("hppa-hitachi-hiuxwe2"); break;
-- }
-- }
-- else if (CPU_IS_HP_MC68K (cpu))
-- puts ("m68k-hitachi-hiuxwe2");
-- else puts ("unknown-hitachi-hiuxwe2");
-- exit (0);
-- }
--EOF
-- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
-- rm -f $dummy.c $dummy
-- echo unknown-hitachi-hiuxwe2
-- exit 0 ;;
-- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-- echo hppa1.1-hp-bsd
-- exit 0 ;;
-- 9000/8??:4.3bsd:*:*)
-- echo hppa1.0-hp-bsd
-- exit 0 ;;
-- *9??*:MPE/iX:*:*)
-- echo hppa1.0-hp-mpeix
-- exit 0 ;;
-- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-- echo hppa1.1-hp-osf
-- exit 0 ;;
-- hp8??:OSF1:*:*)
-- echo hppa1.0-hp-osf
-- exit 0 ;;
-- i?86:OSF1:*:*)
-- if [ -x /usr/sbin/sysversion ] ; then
-- echo ${UNAME_MACHINE}-unknown-osf1mk
-- else
-- echo ${UNAME_MACHINE}-unknown-osf1
-- fi
-- exit 0 ;;
-- parisc*:Lites*:*:*)
-- echo hppa1.1-hp-lites
-- exit 0 ;;
-- hppa*:OpenBSD:*:*)
-- echo hppa-unknown-openbsd
-- exit 0 ;;
-- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-- echo c1-convex-bsd
-- exit 0 ;;
-- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-- if getsysinfo -f scalar_acc
-- then echo c32-convex-bsd
-- else echo c2-convex-bsd
-- fi
-- exit 0 ;;
-- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-- echo c34-convex-bsd
-- exit 0 ;;
-- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-- echo c38-convex-bsd
-- exit 0 ;;
-- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-- echo c4-convex-bsd
-- exit 0 ;;
-- CRAY*X-MP:*:*:*)
-- echo xmp-cray-unicos
-- exit 0 ;;
-- CRAY*Y-MP:*:*:*)
-- echo ymp-cray-unicos${UNAME_RELEASE}
-- exit 0 ;;
-- CRAY*[A-Z]90:*:*:*)
-- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
-- exit 0 ;;
-- CRAY*TS:*:*:*)
-- echo t90-cray-unicos${UNAME_RELEASE}
-- exit 0 ;;
-- CRAY*T3E:*:*:*)
-- echo alpha-cray-unicosmk${UNAME_RELEASE}
-- exit 0 ;;
-- CRAY-2:*:*:*)
-- echo cray2-cray-unicos
-- exit 0 ;;
-- F300:UNIX_System_V:*:*)
-- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-- echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-- exit 0 ;;
-- F301:UNIX_System_V:*:*)
-- echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
-- exit 0 ;;
-- hp3[0-9][05]:NetBSD:*:*)
-- echo m68k-hp-netbsd${UNAME_RELEASE}
-- exit 0 ;;
-- hp300:OpenBSD:*:*)
-- echo m68k-unknown-openbsd${UNAME_RELEASE}
-- exit 0 ;;
-- i?86:BSD/386:*:* | i?86:BSD/OS:*:*)
-- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-- exit 0 ;;
-- sparc*:BSD/OS:*:*)
-- echo sparc-unknown-bsdi${UNAME_RELEASE}
-- exit 0 ;;
-- *:BSD/OS:*:*)
-- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-- exit 0 ;;
-- *:FreeBSD:*:*)
-- if test -x /usr/bin/objformat; then
-- if test "elf" = "`/usr/bin/objformat`"; then
-- echo ${UNAME_MACHINE}-unknown-freebsdelf`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'`
-- exit 0
-- fi
-- fi
-- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-- exit 0 ;;
-- *:NetBSD:*:*)
-- echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-- exit 0 ;;
-- *:OpenBSD:*:*)
-- echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-- exit 0 ;;
-- i*:CYGWIN*:*)
-- echo ${UNAME_MACHINE}-pc-cygwin
-- exit 0 ;;
-- i*:MINGW*:*)
-- echo ${UNAME_MACHINE}-pc-mingw32
-- exit 0 ;;
-- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-- # How do we know it's Interix rather than the generic POSIX subsystem?
-- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-- # UNAME_MACHINE based on the output of uname instead of i386?
-- echo i386-pc-interix
-- exit 0 ;;
-- i*:UWIN*:*)
-- echo ${UNAME_MACHINE}-pc-uwin
-- exit 0 ;;
-- p*:CYGWIN*:*)
-- echo powerpcle-unknown-cygwin
-- exit 0 ;;
-- prep*:SunOS:5.*:*)
-- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-- exit 0 ;;
-- *:GNU:*:*)
-- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-- exit 0 ;;
-- *:Linux:*:*)
-- # uname on the ARM produces all sorts of strangeness, and we need to
-- # filter it out.
-- case "$UNAME_MACHINE" in
-- armv*) UNAME_MACHINE=$UNAME_MACHINE ;;
-- arm* | sa110*) UNAME_MACHINE="arm" ;;
-- esac
--
-- # The BFD linker knows what the default object file format is, so
-- # first see if it will tell us. cd to the root directory to prevent
-- # problems with other programs or directories called `ld' in the path.
-- ld_help_string=`cd /; ld --help 2>&1`
-- ld_supported_emulations=`echo $ld_help_string \
-- | sed -ne '/supported emulations:/!d
-- s/[ ][ ]*/ /g
-- s/.*supported emulations: *//
-- s/ .*//
-- p'`
-- case "$ld_supported_emulations" in
-- *ia64) echo "${UNAME_MACHINE}-unknown-linux" ; exit 0 ;;
-- i?86linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 ;;
-- i?86coff) echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 ;;
-- sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
-- armlinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
-- m68klinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
-- elf32ppc | elf32ppclinux)
-- # Determine Lib Version
-- cat >$dummy.c <<EOF
--#include <features.h>
--#if defined(__GLIBC__)
--extern char __libc_version[];
--extern char __libc_release[];
--#endif
--main(argc, argv)
-- int argc;
-- char *argv[];
--{
--#if defined(__GLIBC__)
-- printf("%s %s\n", __libc_version, __libc_release);
--#else
-- printf("unkown\n");
--#endif
-- return 0;
--}
--EOF
-- LIBC=""
-- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
-- if test "$?" = 0 ; then
-- ./$dummy | grep 1\.99 > /dev/null
-- if test "$?" = 0 ; then
-- LIBC="libc1"
-- fi
-- fi
-- rm -f $dummy.c $dummy
-- echo powerpc-unknown-linux-gnu${LIBC} ; exit 0 ;;
-- esac
--
-- if test "${UNAME_MACHINE}" = "alpha" ; then
-- sed 's/^ //' <<EOF >$dummy.s
-- .globl main
-- .ent main
-- main:
-- .frame \$30,0,\$26,0
-- .prologue 0
-- .long 0x47e03d80 # implver $0
-- lda \$2,259
-- .long 0x47e20c21 # amask $2,$1
-- srl \$1,8,\$2
-- sll \$2,2,\$2
-- sll \$0,3,\$0
-- addl \$1,\$0,\$0
-- addl \$2,\$0,\$0
-- ret \$31,(\$26),1
-- .end main
--EOF
-- LIBC=""
-- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
-- if test "$?" = 0 ; then
-- ./$dummy
-- case "$?" in
-- 7)
-- UNAME_MACHINE="alpha"
-- ;;
-- 15)
-- UNAME_MACHINE="alphaev5"
-- ;;
-- 14)
-- UNAME_MACHINE="alphaev56"
-- ;;
-- 10)
-- UNAME_MACHINE="alphapca56"
-- ;;
-- 16)
-- UNAME_MACHINE="alphaev6"
-- ;;
-- esac
--
-- objdump --private-headers $dummy | \
-- grep ld.so.1 > /dev/null
-- if test "$?" = 0 ; then
-- LIBC="libc1"
-- fi
-- fi
-- rm -f $dummy.s $dummy
-- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
-- elif test "${UNAME_MACHINE}" = "mips" ; then
-- cat >$dummy.c <<EOF
--#ifdef __cplusplus
-- int main (int argc, char *argv[]) {
--#else
-- int main (argc, argv) int argc; char *argv[]; {
--#endif
--#ifdef __MIPSEB__
-- printf ("%s-unknown-linux-gnu\n", argv[1]);
--#endif
--#ifdef __MIPSEL__
-- printf ("%sel-unknown-linux-gnu\n", argv[1]);
--#endif
-- return 0;
--}
--EOF
-- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
-- rm -f $dummy.c $dummy
-- else
-- # Either a pre-BFD a.out linker (linux-gnuoldld)
-- # or one that does not give us useful --help.
-- # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
-- # If ld does not provide *any* "supported emulations:"
-- # that means it is gnuoldld.
-- echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
-- test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
--
-- case "${UNAME_MACHINE}" in
-- i?86)
-- VENDOR=pc;
-- ;;
-- *)
-- VENDOR=unknown;
-- ;;
-- esac
-- # Determine whether the default compiler is a.out or elf
-- cat >$dummy.c <<EOF
--#include <features.h>
--#ifdef __cplusplus
-- int main (int argc, char *argv[]) {
--#else
-- int main (argc, argv) int argc; char *argv[]; {
--#endif
--#ifdef __ELF__
--# ifdef __GLIBC__
--# if __GLIBC__ >= 2
-- printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
--# else
-- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
--# endif
--# else
-- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
--# endif
--#else
-- printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
--#endif
-- return 0;
--}
--EOF
-- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
-- rm -f $dummy.c $dummy
-- fi ;;
--# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
--# are messed up and put the nodename in both sysname and nodename.
-- i?86:DYNIX/ptx:4*:*)
-- echo i386-sequent-sysv4
-- exit 0 ;;
-- i?86:UNIX_SV:4.2MP:2.*)
-- # Unixware is an offshoot of SVR4, but it has its own version
-- # number series starting with 2...
-- # I am not positive that other SVR4 systems won't match this,
-- # I just have to hope. -- rms.
-- # Use sysv4.2uw... so that sysv4* matches it.
-- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-- exit 0 ;;
-- i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
-- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-- echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
-- else
-- echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
-- fi
-- exit 0 ;;
-- i?86:*:5:7*)
-- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
-- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
-- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) && UNAME_MACHINE=i586
-- (/bin/uname -X|egrep '^Machine.*Pent.*II' >/dev/null) && UNAME_MACHINE=i686
-- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) && UNAME_MACHINE=i585
-- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}${UNAME_VERSION}-sysv${UNAME_RELEASE}
-- exit 0 ;;
-- i?86:*:3.2:*)
-- if test -f /usr/options/cb.name; then
-- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-- elif /bin/uname -X 2>/dev/null >/dev/null ; then
-- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
-- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
-- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
-- && UNAME_MACHINE=i586
-- (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
-- && UNAME_MACHINE=i686
-- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
-- && UNAME_MACHINE=i686
-- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-- else
-- echo ${UNAME_MACHINE}-pc-sysv32
-- fi
-- exit 0 ;;
-- pc:*:*:*)
-- # uname -m prints for DJGPP always 'pc', but it prints nothing about
-- # the processor, so we play safe by assuming i386.
-- echo i386-pc-msdosdjgpp
-- exit 0 ;;
-- Intel:Mach:3*:*)
-- echo i386-pc-mach3
-- exit 0 ;;
-- paragon:*:*:*)
-- echo i860-intel-osf1
-- exit 0 ;;
-- i860:*:4.*:*) # i860-SVR4
-- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-- else # Add other i860-SVR4 vendors below as they are discovered.
-- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
-- fi
-- exit 0 ;;
-- mini*:CTIX:SYS*5:*)
-- # "miniframe"
-- echo m68010-convergent-sysv
-- exit 0 ;;
-- M68*:*:R3V[567]*:*)
-- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-- 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
-- OS_REL=''
-- test -r /etc/.relid \
-- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
-- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
-- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-- && echo i486-ncr-sysv4 && exit 0 ;;
-- m68*:LynxOS:2.*:*)
-- echo m68k-unknown-lynxos${UNAME_RELEASE}
-- exit 0 ;;
-- mc68030:UNIX_System_V:4.*:*)
-- echo m68k-atari-sysv4
-- exit 0 ;;
-- i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
-- echo i386-unknown-lynxos${UNAME_RELEASE}
-- exit 0 ;;
-- TSUNAMI:LynxOS:2.*:*)
-- echo sparc-unknown-lynxos${UNAME_RELEASE}
-- exit 0 ;;
-- rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
-- echo rs6000-unknown-lynxos${UNAME_RELEASE}
-- exit 0 ;;
-- SM[BE]S:UNIX_SV:*:*)
-- echo mips-dde-sysv${UNAME_RELEASE}
-- exit 0 ;;
-- RM*:ReliantUNIX-*:*:*)
-- echo mips-sni-sysv4
-- exit 0 ;;
-- RM*:SINIX-*:*:*)
-- echo mips-sni-sysv4
-- exit 0 ;;
-- *:SINIX-*:*:*)
-- if uname -p 2>/dev/null >/dev/null ; then
-- UNAME_MACHINE=`(uname -p) 2>/dev/null`
-- echo ${UNAME_MACHINE}-sni-sysv4
-- else
-- echo ns32k-sni-sysv
-- fi
-- exit 0 ;;
-- PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-- # says <Richard.M.Bartel at ccMail.Census.GOV>
-- echo i586-unisys-sysv4
-- exit 0 ;;
-- *:UNIX_System_V:4*:FTX*)
-- # From Gerald Hewes <hewes at openmarket.com>.
-- # How about differentiating between stratus architectures? -djm
-- echo hppa1.1-stratus-sysv4
-- exit 0 ;;
-- *:*:*:FTX*)
-- # From seanf at swdc.stratus.com.
-- echo i860-stratus-sysv4
-- exit 0 ;;
-- mc68*:A/UX:*:*)
-- echo m68k-apple-aux${UNAME_RELEASE}
-- exit 0 ;;
-- news*:NEWS-OS:*:6*)
-- echo mips-sony-newsos6
-- exit 0 ;;
-- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-- if [ -d /usr/nec ]; then
-- echo mips-nec-sysv${UNAME_RELEASE}
-- else
-- echo mips-unknown-sysv${UNAME_RELEASE}
-- fi
-- exit 0 ;;
-- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
-- echo powerpc-be-beos
-- exit 0 ;;
-- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
-- echo powerpc-apple-beos
-- exit 0 ;;
-- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
-- echo i586-pc-beos
-- exit 0 ;;
-- SX-4:SUPER-UX:*:*)
-- echo sx4-nec-superux${UNAME_RELEASE}
-- exit 0 ;;
-- SX-5:SUPER-UX:*:*)
-- echo sx5-nec-superux${UNAME_RELEASE}
-- exit 0 ;;
-- Power*:Rhapsody:*:*)
-- echo powerpc-apple-rhapsody${UNAME_RELEASE}
-- exit 0 ;;
-- *:Rhapsody:*:*)
-- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-- exit 0 ;;
--esac
--
--#echo '(No uname command or uname output not recognized.)' 1>&2
--#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
--
--cat >$dummy.c <<EOF
--#ifdef _SEQUENT_
--# include <sys/types.h>
--# include <sys/utsname.h>
--#endif
--main ()
--{
--#if defined (sony)
--#if defined (MIPSEB)
-- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
-- I don't know.... */
-- printf ("mips-sony-bsd\n"); exit (0);
--#else
--#include <sys/param.h>
-- printf ("m68k-sony-newsos%s\n",
--#ifdef NEWSOS4
-- "4"
--#else
-- ""
--#endif
-- ); exit (0);
--#endif
--#endif
--
--#if defined (__arm) && defined (__acorn) && defined (__unix)
-- printf ("arm-acorn-riscix"); exit (0);
--#endif
--
--#if defined (hp300) && !defined (hpux)
-- printf ("m68k-hp-bsd\n"); exit (0);
--#endif
--
--#if defined (NeXT)
--#if !defined (__ARCHITECTURE__)
--#define __ARCHITECTURE__ "m68k"
--#endif
-- int version;
-- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-- if (version < 4)
-- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-- else
-- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-- exit (0);
--#endif
--
--#if defined (MULTIMAX) || defined (n16)
--#if defined (UMAXV)
-- printf ("ns32k-encore-sysv\n"); exit (0);
--#else
--#if defined (CMU)
-- printf ("ns32k-encore-mach\n"); exit (0);
--#else
-- printf ("ns32k-encore-bsd\n"); exit (0);
--#endif
--#endif
--#endif
--
--#if defined (__386BSD__)
-- printf ("i386-pc-bsd\n"); exit (0);
--#endif
--
--#if defined (sequent)
--#if defined (i386)
-- printf ("i386-sequent-dynix\n"); exit (0);
--#endif
--#if defined (ns32000)
-- printf ("ns32k-sequent-dynix\n"); exit (0);
--#endif
--#endif
--
--#if defined (_SEQUENT_)
-- struct utsname un;
--
-- uname(&un);
--
-- if (strncmp(un.version, "V2", 2) == 0) {
-- printf ("i386-sequent-ptx2\n"); exit (0);
-- }
-- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-- printf ("i386-sequent-ptx1\n"); exit (0);
-- }
-- printf ("i386-sequent-ptx\n"); exit (0);
--
--#endif
--
--#if defined (vax)
--#if !defined (ultrix)
-- printf ("vax-dec-bsd\n"); exit (0);
--#else
-- printf ("vax-dec-ultrix\n"); exit (0);
--#endif
--#endif
--
--#if defined (alliant) && defined (i860)
-- printf ("i860-alliant-bsd\n"); exit (0);
--#endif
--
-- exit (1);
--}
--EOF
--
--$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
--rm -f $dummy.c $dummy
--
--# Apollos put the system type in the environment.
--
--test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
--
--# Convex versions that predate uname can use getsysinfo(1)
--
--if [ -x /usr/convex/getsysinfo ]
--then
-- case `getsysinfo -f cpu_type` in
-- c1*)
-- echo c1-convex-bsd
-- exit 0 ;;
-- c2*)
-- if getsysinfo -f scalar_acc
-- then echo c32-convex-bsd
-- else echo c2-convex-bsd
-- fi
-- exit 0 ;;
-- c34*)
-- echo c34-convex-bsd
-- exit 0 ;;
-- c38*)
-- echo c38-convex-bsd
-- exit 0 ;;
-- c4*)
-- echo c4-convex-bsd
-- exit 0 ;;
-- esac
--fi
--
--#echo '(Unable to guess system type)' 1>&2
--
--exit 1
-diff -urNd -urNd patch-2.5.4/config.hin patch-2.5.9/config.hin
---- patch-2.5.4/config.hin 1999-08-30 02:53:17.000000000 -0400
-+++ patch-2.5.9/config.hin 2003-05-19 02:50:40.000000000 -0400
-@@ -1,169 +1,365 @@
--/* config.hin. Generated automatically from configure.in by autoheader. */
-+/* config.hin. Generated from configure.ac by autoheader. */
-
--/* Define if on AIX 3.
-- System headers sometimes define this.
-- We just want to avoid a redefinition error message. */
--#ifndef _ALL_SOURCE
--#undef _ALL_SOURCE
-+/* Define to 1 if the `closedir' function returns void instead of `int'. */
-+#undef CLOSEDIR_VOID
-+
-+/* Define if there is a member named d_ino in the struct describing directory
-+ headers. */
-+#undef D_INO_IN_DIRENT
-+
-+/* Define on systems for which file names may have a so-called `drive letter'
-+ prefix, define this to compute the length of that prefix, including the
-+ colon. */
-+#undef FILESYSTEM_ACCEPTS_DRIVE_LETTER_PREFIX
-+
-+/* Define if the backslash character may also serve as a file name component
-+ separator. */
-+#undef FILESYSTEM_BACKSLASH_IS_FILE_NAME_SEPARATOR
-+
-+#if FILESYSTEM_ACCEPTS_DRIVE_LETTER_PREFIX
-+# define FILESYSTEM_PREFIX_LEN(Filename) \
-+ ((Filename)[0] && (Filename)[1] == ':' ? 2 : 0)
-+#else
-+# define FILESYSTEM_PREFIX_LEN(Filename) 0
- #endif
-
--/* Define if the closedir function returns void instead of int. */
--#undef CLOSEDIR_VOID
-+/* Define to 1 if you have the <bp-sym.h> header file. */
-+#undef HAVE_BP_SYM_H
-
--/* Define to empty if the keyword does not work. */
--#undef const
-+/* Define to 1 if you have the declaration of `clearerr_unlocked', and to 0 if
-+ you don't. */
-+#undef HAVE_DECL_CLEARERR_UNLOCKED
-
--/* Define if you don't have vprintf but do have _doprnt. */
--#undef HAVE_DOPRNT
-+/* Define to 1 if you have the declaration of `feof_unlocked', and to 0 if you
-+ don't. */
-+#undef HAVE_DECL_FEOF_UNLOCKED
-
--/* Define if you support file names longer than 14 characters. */
--#undef HAVE_LONG_FILE_NAMES
-+/* Define to 1 if you have the declaration of `ferror_unlocked', and to 0 if
-+ you don't. */
-+#undef HAVE_DECL_FERROR_UNLOCKED
-
--/* Define if you have the vprintf function. */
--#undef HAVE_VPRINTF
-+/* Define to 1 if you have the declaration of `fflush_unlocked', and to 0 if
-+ you don't. */
-+#undef HAVE_DECL_FFLUSH_UNLOCKED
-
--/* Define if on MINIX. */
--#undef _MINIX
-+/* Define to 1 if you have the declaration of `fgets_unlocked', and to 0 if
-+ you don't. */
-+#undef HAVE_DECL_FGETS_UNLOCKED
-
--/* Define to `int' if <sys/types.h> doesn't define. */
--#undef mode_t
-+/* Define to 1 if you have the declaration of `fputc_unlocked', and to 0 if
-+ you don't. */
-+#undef HAVE_DECL_FPUTC_UNLOCKED
-
--/* Define to `long' if <sys/types.h> doesn't define. */
--#undef off_t
-+/* Define to 1 if you have the declaration of `fputs_unlocked', and to 0 if
-+ you don't. */
-+#undef HAVE_DECL_FPUTS_UNLOCKED
-
--/* Define to `int' if <sys/types.h> doesn't define. */
--#undef pid_t
-+/* Define to 1 if you have the declaration of `fread_unlocked', and to 0 if
-+ you don't. */
-+#undef HAVE_DECL_FREAD_UNLOCKED
-
--/* Define if the system does not provide POSIX.1 features except
-- with this defined. */
--#undef _POSIX_1_SOURCE
-+/* Define to 1 if you have the declaration of `free', and to 0 if you don't.
-+ */
-+#undef HAVE_DECL_FREE
-
--/* Define if you need to in order for stat and other things to work. */
--#undef _POSIX_SOURCE
-+/* Define to 1 if you have the declaration of `fwrite_unlocked', and to 0 if
-+ you don't. */
-+#undef HAVE_DECL_FWRITE_UNLOCKED
-
--/* Define as the return type of signal handlers (int or void). */
--#undef RETSIGTYPE
-+/* Define to 1 if you have the declaration of `getchar_unlocked', and to 0 if
-+ you don't. */
-+#undef HAVE_DECL_GETCHAR_UNLOCKED
-
--/* Define to `unsigned' if <sys/types.h> doesn't define. */
--#undef size_t
-+/* Define to 1 if you have the declaration of `getc_unlocked', and to 0 if you
-+ don't. */
-+#undef HAVE_DECL_GETC_UNLOCKED
-
--/* Define if you have the ANSI C header files. */
--#undef STDC_HEADERS
-+/* Define to 1 if you have the declaration of `getenv', and to 0 if you don't.
-+ */
-+#undef HAVE_DECL_GETENV
-
--/* Define if you can safely include both <sys/time.h> and <time.h>. */
--#undef TIME_WITH_SYS_TIME
-+/* Define to 1 if you have the declaration of `malloc', and to 0 if you don't.
-+ */
-+#undef HAVE_DECL_MALLOC
-
--/* Define if you have the _doprintf function. */
--#undef HAVE__DOPRINTF
-+/* Define to 1 if you have the declaration of `mktemp', and to 0 if you don't.
-+ */
-+#undef HAVE_DECL_MKTEMP
-
--/* Define if you have the fseeko function. */
-+/* Define to 1 if you have the declaration of `putchar_unlocked', and to 0 if
-+ you don't. */
-+#undef HAVE_DECL_PUTCHAR_UNLOCKED
-+
-+/* Define to 1 if you have the declaration of `putc_unlocked', and to 0 if you
-+ don't. */
-+#undef HAVE_DECL_PUTC_UNLOCKED
-+
-+/* Define to 1 if you have the declaration of `strerror', and to 0 if you
-+ don't. */
-+#undef HAVE_DECL_STRERROR
-+
-+/* Define to 1 if you have the declaration of `strerror_r', and to 0 if you
-+ don't. */
-+#undef HAVE_DECL_STRERROR_R
-+
-+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
-+ */
-+#undef HAVE_DIRENT_H
-+
-+/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */
-+#undef HAVE_DOPRNT
-+
-+/* Define to 1 if you have the <fcntl.h> header file. */
-+#undef HAVE_FCNTL_H
-+
-+/* Define to 1 if fseeko (and presumably ftello) exists and is declared. */
- #undef HAVE_FSEEKO
-
--/* Define if you have the isascii function. */
-+/* Define to 1 if you have the `geteuid' function. */
-+#undef HAVE_GETEUID
-+
-+/* Define to 1 if you have the `getuid' function. */
-+#undef HAVE_GETUID
-+
-+/* Define to 1 if you have the <inttypes.h> header file. */
-+#undef HAVE_INTTYPES_H
-+
-+/* Define to 1 if you have the `isascii' function. */
- #undef HAVE_ISASCII
-
--/* Define if you have the memchr function. */
-+/* Define to 1 if you have the `iswprint' function. */
-+#undef HAVE_ISWPRINT
-+
-+/* Define to 1 if you have the <limits.h> header file. */
-+#undef HAVE_LIMITS_H
-+
-+/* Define to 1 if you support file names longer than 14 characters. */
-+#undef HAVE_LONG_FILE_NAMES
-+
-+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
-+ to 0 otherwise. */
-+#undef HAVE_MALLOC
-+
-+/* Define to 1 if mbrtowc and mbstate_t are properly declared. */
-+#undef HAVE_MBRTOWC
-+
-+/* Define to 1 if you have the `mbsinit' function. */
-+#undef HAVE_MBSINIT
-+
-+/* Define to 1 if <wchar.h> declares mbstate_t. */
-+#undef HAVE_MBSTATE_T
-+
-+/* Define to 1 if you have the `memchr' function. */
- #undef HAVE_MEMCHR
-
--/* Define if you have the memcmp function. */
-+/* Define to 1 if you have the `memcmp' function. */
- #undef HAVE_MEMCMP
-
--/* Define if you have the mkdir function. */
-+/* Define to 1 if you have the <memory.h> header file. */
-+#undef HAVE_MEMORY_H
-+
-+/* Define to 1 if you have the `mkdir' function. */
- #undef HAVE_MKDIR
-
--/* Define if you have the mktemp function. */
-+/* Define to 1 if you have the `mktemp' function. */
- #undef HAVE_MKTEMP
-
--/* Define if you have the pathconf function. */
-+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
-+#undef HAVE_NDIR_H
-+
-+/* Define to 1 if you have the `pathconf' function. */
- #undef HAVE_PATHCONF
-
--/* Define if you have the raise function. */
-+/* Define to 1 if you have the `raise' function. */
- #undef HAVE_RAISE
-
--/* Define if you have the rename function. */
--#undef HAVE_RENAME
-+/* Define to 1 if your system has a GNU libc compatible `realloc' function,
-+ and to 0 otherwise. */
-+#undef HAVE_REALLOC
-
--/* Define if you have the rmdir function. */
-+/* Define to 1 if you have the `rmdir' function. */
- #undef HAVE_RMDIR
-
--/* Define if you have the setmode function. */
--#undef HAVE_SETMODE
-+/* Define to 1 if you have the DOS-style `setmode' function. */
-+#undef HAVE_SETMODE_DOS
-
--/* Define if you have the sigaction function. */
-+/* Define to 1 if you have the `sigaction' function. */
- #undef HAVE_SIGACTION
-
--/* Define if you have the sigprocmask function. */
-+/* Define to 1 if you have the `sigprocmask' function. */
- #undef HAVE_SIGPROCMASK
-
--/* Define if you have the sigsetmask function. */
-+/* Define to 1 if you have the `sigsetmask' function. */
- #undef HAVE_SIGSETMASK
-
--/* Define if you have the strerror function. */
--#undef HAVE_STRERROR
-+/* Define to 1 if stdbool.h conforms to C99. */
-+#undef HAVE_STDBOOL_H
-
--/* Define if you have the <dirent.h> header file. */
--#undef HAVE_DIRENT_H
-+/* Define to 1 if you have the <stddef.h> header file. */
-+#undef HAVE_STDDEF_H
-
--/* Define if you have the <fcntl.h> header file. */
--#undef HAVE_FCNTL_H
-+/* Define to 1 if you have the <stdint.h> header file. */
-+#undef HAVE_STDINT_H
-
--/* Define if you have the <limits.h> header file. */
--#undef HAVE_LIMITS_H
-+/* Define to 1 if you have the <stdlib.h> header file. */
-+#undef HAVE_STDLIB_H
-
--/* Define if you have the <ndir.h> header file. */
--#undef HAVE_NDIR_H
-+/* Define to 1 if you have the `strerror' function. */
-+#undef HAVE_STRERROR
-
--/* Define if you have the <string.h> header file. */
-+/* Define to 1 if you have the `strerror_r' function. */
-+#undef HAVE_STRERROR_R
-+
-+/* Define to 1 if you have the <strings.h> header file. */
-+#undef HAVE_STRINGS_H
-+
-+/* Define to 1 if you have the <string.h> header file. */
- #undef HAVE_STRING_H
-
--/* Define if you have the <sys/dir.h> header file. */
-+/* Define to 1 if you have the `strncasecmp' function. */
-+#undef HAVE_STRNCASECMP
-+
-+/* Define if struct utimbuf is declared -- usually in <utime.h>. Some systems
-+ have utime.h but don't declare the struct anywhere. */
-+#undef HAVE_STRUCT_UTIMBUF
-+
-+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
-+ */
- #undef HAVE_SYS_DIR_H
-
--/* Define if you have the <sys/ndir.h> header file. */
-+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
-+ */
- #undef HAVE_SYS_NDIR_H
-
--/* Define if you have the <unistd.h> header file. */
-+/* Define to 1 if you have the <sys/stat.h> header file. */
-+#undef HAVE_SYS_STAT_H
-+
-+/* Define to 1 if you have the <sys/time.h> header file. */
-+#undef HAVE_SYS_TIME_H
-+
-+/* Define to 1 if you have the <sys/types.h> header file. */
-+#undef HAVE_SYS_TYPES_H
-+
-+/* Define to 1 if you have the <unistd.h> header file. */
- #undef HAVE_UNISTD_H
-
--/* Define if you have the <utime.h> header file. */
-+/* Define to 1 if you have the <utime.h> header file. */
- #undef HAVE_UTIME_H
-
--/* Define if you have the <varargs.h> header file. */
-+/* Define to 1 if you have the <varargs.h> header file. */
- #undef HAVE_VARARGS_H
-
-+/* Define to 1 if you have the `vprintf' function. */
-+#undef HAVE_VPRINTF
-+
-+/* Define to 1 if you have the <wchar.h> header file. */
-+#undef HAVE_WCHAR_H
-+
-+/* Define to 1 if you have the <wctype.h> header file. */
-+#undef HAVE_WCTYPE_H
-+
-+/* Define to 1 if the system has the type `_Bool'. */
-+#undef HAVE__BOOL
-+
-+/* Define to 1 if you have the `_doprintf' function. */
-+#undef HAVE__DOPRINTF
-+
-+#if FILESYSTEM_BACKSLASH_IS_FILE_NAME_SEPARATOR
-+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
-+#else
-+# define ISSLASH(C) ((C) == '/')
-+#endif
-+
-+/* Define if mkdir takes only one argument. */
-+#undef MKDIR_TAKES_ONE_ARG
-+
-+/* Define to the address where bug reports for this package should be sent. */
-+#undef PACKAGE_BUGREPORT
-+
-+/* Define to the full name of this package. */
-+#undef PACKAGE_NAME
-+
-+/* Define to the full name and version of this package. */
-+#undef PACKAGE_STRING
-+
-+/* Define to the one symbol short name of this package. */
-+#undef PACKAGE_TARNAME
-+
-+/* Define to the version of this package. */
-+#undef PACKAGE_VERSION
-+
-+/* Define to 1 if the C compiler supports function prototypes. */
-+#undef PROTOTYPES
-+
-+/* Define as the return type of signal handlers (`int' or `void'). */
-+#undef RETSIGTYPE
-+
-+/* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
-+#undef STAT_MACROS_BROKEN
-+
-+/* Define to 1 if you have the ANSI C header files. */
-+#undef STDC_HEADERS
-+
-+/* Define to 1 if strerror_r returns char *. */
-+#undef STRERROR_R_CHAR_P
-+
-+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-+#undef TIME_WITH_SYS_TIME
-+
-+/* Define to 1 if on AIX 3.
-+ System headers sometimes define this.
-+ We just want to avoid a redefinition error message. */
-+#ifndef _ALL_SOURCE
-+# undef _ALL_SOURCE
-+#endif
-+
- /* Number of bits in a file offset, on hosts where this is settable. */
- #undef _FILE_OFFSET_BITS
-
--/* Define to make fseeko etc. visible, on some hosts. */
-+/* Enable GNU extensions on systems that have them. */
-+#ifndef _GNU_SOURCE
-+# undef _GNU_SOURCE
-+#endif
-+
-+/* Define to 1 to make fseeko visible on some hosts (e.g. glibc 2.2). */
- #undef _LARGEFILE_SOURCE
-
- /* Define for large files, on AIX-style hosts. */
- #undef _LARGE_FILES
-
--/* Define if compiler has function prototypes */
--#undef PROTOTYPES
-+/* Define to 1 if on MINIX. */
-+#undef _MINIX
-
--/* Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
-- and declares uintmax_t. */
--#undef HAVE_INTTYPES_H
-+/* Define to 2 if the system does not provide POSIX.1 features except with
-+ this defined. */
-+#undef _POSIX_1_SOURCE
-
--/* Define if struct utimbuf is declared -- usually in <utime.h>.
-- Some systems have utime.h but don't declare the struct anywhere. */
--#undef HAVE_STRUCT_UTIMBUF
-+/* Define to 1 if you need to in order for `stat' and other things to work. */
-+#undef _POSIX_SOURCE
-
--/* Define if the malloc check has been performed. */
--#undef HAVE_DONE_WORKING_MALLOC_CHECK
-+/* Define like PROTOTYPES; this can be used by system headers. */
-+#undef __PROTOTYPES
-+
-+/* Define to empty if `const' does not conform to ANSI C. */
-+#undef const
-
- /* Define to rpl_malloc if the replacement function should be used. */
- #undef malloc
-
--/* Define if the realloc check has been performed. */
--#undef HAVE_DONE_WORKING_REALLOC_CHECK
-+/* Define to a type if <wchar.h> does not define. */
-+#undef mbstate_t
-+
-+/* Define to `int' if <sys/types.h> does not define. */
-+#undef mode_t
-+
-+/* Define to `long' if <sys/types.h> does not define. */
-+#undef off_t
-+
-+/* Define to `int' if <sys/types.h> does not define. */
-+#undef pid_t
-
- /* Define to rpl_realloc if the replacement function should be used. */
- #undef realloc
-
--/* Define if there is a member named d_ino in the struct describing
-- directory headers. */
--#undef D_INO_IN_DIRENT
--
-+/* Define to `unsigned' if <sys/types.h> does not define. */
-+#undef size_t
-diff -urNd -urNd patch-2.5.4/config.sub patch-2.5.9/config.sub
---- patch-2.5.4/config.sub 1999-08-05 08:55:20.000000000 -0400
-+++ patch-2.5.9/config.sub 1969-12-31 19:00:00.000000000 -0500
-@@ -1,1220 +0,0 @@
--#! /bin/sh
--# Configuration validation subroutine script, version 1.1.
--# Copyright (C) 1991, 92-97, 1998, 1999 Free Software Foundation, Inc.
--# This file is (in principle) common to ALL GNU software.
--# The presence of a machine in this file suggests that SOME GNU software
--# can handle that machine. It does not imply ALL GNU software can.
--#
--# This file is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2 of the License, or
--# (at your option) any later version.
--#
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--#
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330,
--# Boston, MA 02111-1307, USA.
--
--# As a special exception to the GNU General Public License, if you
--# distribute this file as part of a program that contains a
--# configuration script generated by Autoconf, you may include it under
--# the same distribution terms that you use for the rest of that program.
--
--# Configuration subroutine to validate and canonicalize a configuration type.
--# Supply the specified configuration type as an argument.
--# If it is invalid, we print an error message on stderr and exit with code 1.
--# Otherwise, we print the canonical config type on stdout and succeed.
--
--# This file is supposed to be the same for all GNU packages
--# and recognize all the CPU types, system types and aliases
--# that are meaningful with *any* GNU software.
--# Each package is responsible for reporting which valid configurations
--# it does not support. The user should be able to distinguish
--# a failure to support a valid configuration from a meaningless
--# configuration.
--
--# The goal of this file is to map all the various variations of a given
--# machine specification into a single specification in the form:
--# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
--# or in some cases, the newer four-part form:
--# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
--# It is wrong to echo any other type of specification.
--
--if [ x$1 = x ]
--then
-- echo Configuration name missing. 1>&2
-- echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
-- echo "or $0 ALIAS" 1>&2
-- echo where ALIAS is a recognized configuration type. 1>&2
-- exit 1
--fi
--
--# First pass through any local machine types.
--case $1 in
-- *local*)
-- echo $1
-- exit 0
-- ;;
-- *)
-- ;;
--esac
--
--# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
--# Here we must recognize all the valid KERNEL-OS combinations.
--maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
--case $maybe_os in
-- linux-gnu*)
-- os=-$maybe_os
-- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-- ;;
-- *)
-- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-- if [ $basic_machine != $1 ]
-- then os=`echo $1 | sed 's/.*-/-/'`
-- else os=; fi
-- ;;
--esac
--
--### Let's recognize common machines as not being operating systems so
--### that things like config.sub decstation-3100 work. We also
--### recognize some manufacturers as not being operating systems, so we
--### can provide default operating systems below.
--case $os in
-- -sun*os*)
-- # Prevent following clause from handling this invalid input.
-- ;;
-- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-- -apple)
-- os=
-- basic_machine=$1
-- ;;
-- -sim | -cisco | -oki | -wec | -winbond)
-- os=
-- basic_machine=$1
-- ;;
-- -scout)
-- ;;
-- -wrs)
-- os=-vxworks
-- basic_machine=$1
-- ;;
-- -hiux*)
-- os=-hiuxwe2
-- ;;
-- -sco5)
-- os=-sco3.2v5
-- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-- ;;
-- -sco4)
-- os=-sco3.2v4
-- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-- ;;
-- -sco3.2.[4-9]*)
-- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-- ;;
-- -sco3.2v[4-9]*)
-- # Don't forget version if it is 3.2v4 or newer.
-- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-- ;;
-- -sco*)
-- os=-sco3.2v2
-- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-- ;;
-- -udk*)
-- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-- ;;
-- -isc)
-- os=-isc2.2
-- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-- ;;
-- -clix*)
-- basic_machine=clipper-intergraph
-- ;;
-- -isc*)
-- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-- ;;
-- -lynx*)
-- os=-lynxos
-- ;;
-- -ptx*)
-- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-- ;;
-- -windowsnt*)
-- os=`echo $os | sed -e 's/windowsnt/winnt/'`
-- ;;
-- -psos*)
-- os=-psos
-- ;;
-- -mint | -mint[0-9]*)
-- basic_machine=m68k-atari
-- os=-mint
-- ;;
--esac
--
--# Decode aliases for certain CPU-COMPANY combinations.
--case $basic_machine in
-- # Recognize the basic CPU types without company name.
-- # Some are omitted here because they have special meanings below.
-- tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
-- | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
-- | 580 | i960 | h8300 \
-- | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
-- | alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \
-- | we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
-- | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
-- | mips64orion | mips64orionel | mipstx39 | mipstx39el \
-- | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
-- | mips64vr5000 | miprs64vr5000el | mcore \
-- | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
-- | thumb | d10v)
-- basic_machine=$basic_machine-unknown
-- ;;
-- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65)
-- ;;
--
-- # We use `pc' rather than `unknown'
-- # because (1) that's what they normally are, and
-- # (2) the word "unknown" tends to confuse beginning users.
-- i[34567]86)
-- basic_machine=$basic_machine-pc
-- ;;
-- # Object if more than one company name word.
-- *-*-*)
-- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-- exit 1
-- ;;
-- # Recognize the basic CPU types with company name.
-- # FIXME: clean up the formatting here.
-- vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
-- | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
-- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
-- | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
-- | xmp-* | ymp-* \
-- | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \
-- | alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67]-* \
-- | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
-- | clipper-* | orion-* \
-- | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
-- | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
-- | mips64el-* | mips64orion-* | mips64orionel-* \
-- | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
-- | mipstx39-* | mipstx39el-* | mcore-* \
-- | f301-* | armv*-* | t3e-* \
-- | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
-- | thumb-* | v850-* | d30v-* | tic30-* | c30-* )
-- ;;
-- # Recognize the various machine names and aliases which stand
-- # for a CPU type and a company and sometimes even an OS.
-- 386bsd)
-- basic_machine=i386-unknown
-- os=-bsd
-- ;;
-- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-- basic_machine=m68000-att
-- ;;
-- 3b*)
-- basic_machine=we32k-att
-- ;;
-- a29khif)
-- basic_machine=a29k-amd
-- os=-udi
-- ;;
-- adobe68k)
-- basic_machine=m68010-adobe
-- os=-scout
-- ;;
-- alliant | fx80)
-- basic_machine=fx80-alliant
-- ;;
-- altos | altos3068)
-- basic_machine=m68k-altos
-- ;;
-- am29k)
-- basic_machine=a29k-none
-- os=-bsd
-- ;;
-- amdahl)
-- basic_machine=580-amdahl
-- os=-sysv
-- ;;
-- amiga | amiga-*)
-- basic_machine=m68k-cbm
-- ;;
-- amigaos | amigados)
-- basic_machine=m68k-cbm
-- os=-amigaos
-- ;;
-- amigaunix | amix)
-- basic_machine=m68k-cbm
-- os=-sysv4
-- ;;
-- apollo68)
-- basic_machine=m68k-apollo
-- os=-sysv
-- ;;
-- apollo68bsd)
-- basic_machine=m68k-apollo
-- os=-bsd
-- ;;
-- aux)
-- basic_machine=m68k-apple
-- os=-aux
-- ;;
-- balance)
-- basic_machine=ns32k-sequent
-- os=-dynix
-- ;;
-- convex-c1)
-- basic_machine=c1-convex
-- os=-bsd
-- ;;
-- convex-c2)
-- basic_machine=c2-convex
-- os=-bsd
-- ;;
-- convex-c32)
-- basic_machine=c32-convex
-- os=-bsd
-- ;;
-- convex-c34)
-- basic_machine=c34-convex
-- os=-bsd
-- ;;
-- convex-c38)
-- basic_machine=c38-convex
-- os=-bsd
-- ;;
-- cray | ymp)
-- basic_machine=ymp-cray
-- os=-unicos
-- ;;
-- cray2)
-- basic_machine=cray2-cray
-- os=-unicos
-- ;;
-- [ctj]90-cray)
-- basic_machine=c90-cray
-- os=-unicos
-- ;;
-- crds | unos)
-- basic_machine=m68k-crds
-- ;;
-- da30 | da30-*)
-- basic_machine=m68k-da30
-- ;;
-- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-- basic_machine=mips-dec
-- ;;
-- delta | 3300 | motorola-3300 | motorola-delta \
-- | 3300-motorola | delta-motorola)
-- basic_machine=m68k-motorola
-- ;;
-- delta88)
-- basic_machine=m88k-motorola
-- os=-sysv3
-- ;;
-- dpx20 | dpx20-*)
-- basic_machine=rs6000-bull
-- os=-bosx
-- ;;
-- dpx2* | dpx2*-bull)
-- basic_machine=m68k-bull
-- os=-sysv3
-- ;;
-- ebmon29k)
-- basic_machine=a29k-amd
-- os=-ebmon
-- ;;
-- elxsi)
-- basic_machine=elxsi-elxsi
-- os=-bsd
-- ;;
-- encore | umax | mmax)
-- basic_machine=ns32k-encore
-- ;;
-- es1800 | OSE68k | ose68k | ose | OSE)
-- basic_machine=m68k-ericsson
-- os=-ose
-- ;;
-- fx2800)
-- basic_machine=i860-alliant
-- ;;
-- genix)
-- basic_machine=ns32k-ns
-- ;;
-- gmicro)
-- basic_machine=tron-gmicro
-- os=-sysv
-- ;;
-- h3050r* | hiux*)
-- basic_machine=hppa1.1-hitachi
-- os=-hiuxwe2
-- ;;
-- h8300hms)
-- basic_machine=h8300-hitachi
-- os=-hms
-- ;;
-- h8300xray)
-- basic_machine=h8300-hitachi
-- os=-xray
-- ;;
-- h8500hms)
-- basic_machine=h8500-hitachi
-- os=-hms
-- ;;
-- harris)
-- basic_machine=m88k-harris
-- os=-sysv3
-- ;;
-- hp300-*)
-- basic_machine=m68k-hp
-- ;;
-- hp300bsd)
-- basic_machine=m68k-hp
-- os=-bsd
-- ;;
-- hp300hpux)
-- basic_machine=m68k-hp
-- os=-hpux
-- ;;
-- hp3k9[0-9][0-9] | hp9[0-9][0-9])
-- basic_machine=hppa1.0-hp
-- ;;
-- hp9k2[0-9][0-9] | hp9k31[0-9])
-- basic_machine=m68000-hp
-- ;;
-- hp9k3[2-9][0-9])
-- basic_machine=m68k-hp
-- ;;
-- hp9k6[0-9][0-9] | hp6[0-9][0-9])
-- basic_machine=hppa1.0-hp
-- ;;
-- hp9k7[0-79][0-9] | hp7[0-79][0-9])
-- basic_machine=hppa1.1-hp
-- ;;
-- hp9k78[0-9] | hp78[0-9])
-- # FIXME: really hppa2.0-hp
-- basic_machine=hppa1.1-hp
-- ;;
-- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-- # FIXME: really hppa2.0-hp
-- basic_machine=hppa1.1-hp
-- ;;
-- hp9k8[0-9][13679] | hp8[0-9][13679])
-- basic_machine=hppa1.1-hp
-- ;;
-- hp9k8[0-9][0-9] | hp8[0-9][0-9])
-- basic_machine=hppa1.0-hp
-- ;;
-- hppa-next)
-- os=-nextstep3
-- ;;
-- hppaosf)
-- basic_machine=hppa1.1-hp
-- os=-osf
-- ;;
-- hppro)
-- basic_machine=hppa1.1-hp
-- os=-proelf
-- ;;
-- i370-ibm* | ibm*)
-- basic_machine=i370-ibm
-- os=-mvs
-- ;;
--# I'm not sure what "Sysv32" means. Should this be sysv3.2?
-- i[34567]86v32)
-- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-- os=-sysv32
-- ;;
-- i[34567]86v4*)
-- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-- os=-sysv4
-- ;;
-- i[34567]86v)
-- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-- os=-sysv
-- ;;
-- i[34567]86sol2)
-- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-- os=-solaris2
-- ;;
-- i386mach)
-- basic_machine=i386-mach
-- os=-mach
-- ;;
-- i386-vsta | vsta)
-- basic_machine=i386-unknown
-- os=-vsta
-- ;;
-- i386-go32 | go32)
-- basic_machine=i386-unknown
-- os=-go32
-- ;;
-- i386-mingw32 | mingw32)
-- basic_machine=i386-unknown
-- os=-mingw32
-- ;;
-- iris | iris4d)
-- basic_machine=mips-sgi
-- case $os in
-- -irix*)
-- ;;
-- *)
-- os=-irix4
-- ;;
-- esac
-- ;;
-- isi68 | isi)
-- basic_machine=m68k-isi
-- os=-sysv
-- ;;
-- m88k-omron*)
-- basic_machine=m88k-omron
-- ;;
-- magnum | m3230)
-- basic_machine=mips-mips
-- os=-sysv
-- ;;
-- merlin)
-- basic_machine=ns32k-utek
-- os=-sysv
-- ;;
-- miniframe)
-- basic_machine=m68000-convergent
-- ;;
-- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-- basic_machine=m68k-atari
-- os=-mint
-- ;;
-- mipsel*-linux*)
-- basic_machine=mipsel-unknown
-- os=-linux-gnu
-- ;;
-- mips*-linux*)
-- basic_machine=mips-unknown
-- os=-linux-gnu
-- ;;
-- mips3*-*)
-- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-- ;;
-- mips3*)
-- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-- ;;
-- monitor)
-- basic_machine=m68k-rom68k
-- os=-coff
-- ;;
-- msdos)
-- basic_machine=i386-unknown
-- os=-msdos
-- ;;
-- ncr3000)
-- basic_machine=i486-ncr
-- os=-sysv4
-- ;;
-- netbsd386)
-- basic_machine=i386-unknown
-- os=-netbsd
-- ;;
-- netwinder)
-- basic_machine=armv4l-corel
-- os=-linux
-- ;;
-- news | news700 | news800 | news900)
-- basic_machine=m68k-sony
-- os=-newsos
-- ;;
-- news1000)
-- basic_machine=m68030-sony
-- os=-newsos
-- ;;
-- news-3600 | risc-news)
-- basic_machine=mips-sony
-- os=-newsos
-- ;;
-- necv70)
-- basic_machine=v70-nec
-- os=-sysv
-- ;;
-- next | m*-next )
-- basic_machine=m68k-next
-- case $os in
-- -nextstep* )
-- ;;
-- -ns2*)
-- os=-nextstep2
-- ;;
-- *)
-- os=-nextstep3
-- ;;
-- esac
-- ;;
-- nh3000)
-- basic_machine=m68k-harris
-- os=-cxux
-- ;;
-- nh[45]000)
-- basic_machine=m88k-harris
-- os=-cxux
-- ;;
-- nindy960)
-- basic_machine=i960-intel
-- os=-nindy
-- ;;
-- mon960)
-- basic_machine=i960-intel
-- os=-mon960
-- ;;
-- np1)
-- basic_machine=np1-gould
-- ;;
-- op50n-* | op60c-*)
-- basic_machine=hppa1.1-oki
-- os=-proelf
-- ;;
-- OSE68000 | ose68000)
-- basic_machine=m68000-ericsson
-- os=-ose
-- ;;
-- os68k)
-- basic_machine=m68k-none
-- os=-os68k
-- ;;
-- pa-hitachi)
-- basic_machine=hppa1.1-hitachi
-- os=-hiuxwe2
-- ;;
-- paragon)
-- basic_machine=i860-intel
-- os=-osf
-- ;;
-- pbd)
-- basic_machine=sparc-tti
-- ;;
-- pbb)
-- basic_machine=m68k-tti
-- ;;
-- pc532 | pc532-*)
-- basic_machine=ns32k-pc532
-- ;;
-- pentium | p5 | k5 | k6 | nexen)
-- basic_machine=i586-pc
-- ;;
-- pentiumpro | p6 | 6x86)
-- basic_machine=i686-pc
-- ;;
-- pentiumii | pentium2)
-- basic_machine=i786-pc
-- ;;
-- pentium-* | p5-* | k5-* | k6-* | nexen-*)
-- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-- ;;
-- pentiumpro-* | p6-* | 6x86-*)
-- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-- ;;
-- pentiumii-* | pentium2-*)
-- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-- ;;
-- pn)
-- basic_machine=pn-gould
-- ;;
-- power) basic_machine=rs6000-ibm
-- ;;
-- ppc) basic_machine=powerpc-unknown
-- ;;
-- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-- ;;
-- ppcle | powerpclittle | ppc-le | powerpc-little)
-- basic_machine=powerpcle-unknown
-- ;;
-- ppcle-* | powerpclittle-*)
-- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-- ;;
-- ps2)
-- basic_machine=i386-ibm
-- ;;
-- rom68k)
-- basic_machine=m68k-rom68k
-- os=-coff
-- ;;
-- rm[46]00)
-- basic_machine=mips-siemens
-- ;;
-- rtpc | rtpc-*)
-- basic_machine=romp-ibm
-- ;;
-- sa29200)
-- basic_machine=a29k-amd
-- os=-udi
-- ;;
-- sequent)
-- basic_machine=i386-sequent
-- ;;
-- sh)
-- basic_machine=sh-hitachi
-- os=-hms
-- ;;
-- sparclite-wrs)
-- basic_machine=sparclite-wrs
-- os=-vxworks
-- ;;
-- sps7)
-- basic_machine=m68k-bull
-- os=-sysv2
-- ;;
-- spur)
-- basic_machine=spur-unknown
-- ;;
-- st2000)
-- basic_machine=m68k-tandem
-- ;;
-- stratus)
-- basic_machine=i860-stratus
-- os=-sysv4
-- ;;
-- sun2)
-- basic_machine=m68000-sun
-- ;;
-- sun2os3)
-- basic_machine=m68000-sun
-- os=-sunos3
-- ;;
-- sun2os4)
-- basic_machine=m68000-sun
-- os=-sunos4
-- ;;
-- sun3os3)
-- basic_machine=m68k-sun
-- os=-sunos3
-- ;;
-- sun3os4)
-- basic_machine=m68k-sun
-- os=-sunos4
-- ;;
-- sun4os3)
-- basic_machine=sparc-sun
-- os=-sunos3
-- ;;
-- sun4os4)
-- basic_machine=sparc-sun
-- os=-sunos4
-- ;;
-- sun4sol2)
-- basic_machine=sparc-sun
-- os=-solaris2
-- ;;
-- sun3 | sun3-*)
-- basic_machine=m68k-sun
-- ;;
-- sun4)
-- basic_machine=sparc-sun
-- ;;
-- sun386 | sun386i | roadrunner)
-- basic_machine=i386-sun
-- ;;
-- symmetry)
-- basic_machine=i386-sequent
-- os=-dynix
-- ;;
-- t3e)
-- basic_machine=t3e-cray
-- os=-unicos
-- ;;
-- tx39)
-- basic_machine=mipstx39-unknown
-- ;;
-- tx39el)
-- basic_machine=mipstx39el-unknown
-- ;;
-- tower | tower-32)
-- basic_machine=m68k-ncr
-- ;;
-- udi29k)
-- basic_machine=a29k-amd
-- os=-udi
-- ;;
-- ultra3)
-- basic_machine=a29k-nyu
-- os=-sym1
-- ;;
-- v810 | necv810)
-- basic_machine=v810-nec
-- os=-none
-- ;;
-- vaxv)
-- basic_machine=vax-dec
-- os=-sysv
-- ;;
-- vms)
-- basic_machine=vax-dec
-- os=-vms
-- ;;
-- vpp*|vx|vx-*)
-- basic_machine=f301-fujitsu
-- ;;
-- vxworks960)
-- basic_machine=i960-wrs
-- os=-vxworks
-- ;;
-- vxworks68)
-- basic_machine=m68k-wrs
-- os=-vxworks
-- ;;
-- vxworks29k)
-- basic_machine=a29k-wrs
-- os=-vxworks
-- ;;
-- w65*)
-- basic_machine=w65-wdc
-- os=-none
-- ;;
-- w89k-*)
-- basic_machine=hppa1.1-winbond
-- os=-proelf
-- ;;
-- xmp)
-- basic_machine=xmp-cray
-- os=-unicos
-- ;;
-- xps | xps100)
-- basic_machine=xps100-honeywell
-- ;;
-- z8k-*-coff)
-- basic_machine=z8k-unknown
-- os=-sim
-- ;;
-- none)
-- basic_machine=none-none
-- os=-none
-- ;;
--
--# Here we handle the default manufacturer of certain CPU types. It is in
--# some cases the only manufacturer, in others, it is the most popular.
-- w89k)
-- basic_machine=hppa1.1-winbond
-- ;;
-- op50n)
-- basic_machine=hppa1.1-oki
-- ;;
-- op60c)
-- basic_machine=hppa1.1-oki
-- ;;
-- mips)
-- if [ x$os = x-linux-gnu ]; then
-- basic_machine=mips-unknown
-- else
-- basic_machine=mips-mips
-- fi
-- ;;
-- romp)
-- basic_machine=romp-ibm
-- ;;
-- rs6000)
-- basic_machine=rs6000-ibm
-- ;;
-- vax)
-- basic_machine=vax-dec
-- ;;
-- pdp11)
-- basic_machine=pdp11-dec
-- ;;
-- we32k)
-- basic_machine=we32k-att
-- ;;
-- sparc | sparcv9)
-- basic_machine=sparc-sun
-- ;;
-- cydra)
-- basic_machine=cydra-cydrome
-- ;;
-- orion)
-- basic_machine=orion-highlevel
-- ;;
-- orion105)
-- basic_machine=clipper-highlevel
-- ;;
-- mac | mpw | mac-mpw)
-- basic_machine=m68k-apple
-- ;;
-- pmac | pmac-mpw)
-- basic_machine=powerpc-apple
-- ;;
-- c4x*)
-- basic_machine=c4x-none
-- os=-coff
-- ;;
-- *)
-- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-- exit 1
-- ;;
--esac
--
--# Here we canonicalize certain aliases for manufacturers.
--case $basic_machine in
-- *-digital*)
-- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-- ;;
-- *-commodore*)
-- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-- ;;
-- *)
-- ;;
--esac
--
--# Decode manufacturer-specific aliases for certain operating systems.
--
--if [ x"$os" != x"" ]
--then
--case $os in
-- # First match some system type aliases
-- # that might get confused with valid system types.
-- # -solaris* is a basic system type, with this one exception.
-- -solaris1 | -solaris1.*)
-- os=`echo $os | sed -e 's|solaris1|sunos4|'`
-- ;;
-- -solaris)
-- os=-solaris2
-- ;;
-- -svr4*)
-- os=-sysv4
-- ;;
-- -unixware*)
-- os=-sysv4.2uw
-- ;;
-- -gnu/linux*)
-- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-- ;;
-- # First accept the basic system types.
-- # The portable systems comes first.
-- # Each alternative MUST END IN A *, to match a version number.
-- # -sysv* is not here because it comes later, after sysvr4.
-- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-- | -aos* \
-- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
-- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
-- | -interix* | -uwin* | -rhapsody* | -openstep* | -oskit*)
-- # Remember, each alternative MUST END IN *, to match a version number.
-- ;;
-- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
-- | -macos* | -mpw* | -magic* | -mon960* | -lnews*)
-- ;;
-- -mac*)
-- os=`echo $os | sed -e 's|mac|macos|'`
-- ;;
-- -linux*)
-- os=`echo $os | sed -e 's|linux|linux-gnu|'`
-- ;;
-- -sunos5*)
-- os=`echo $os | sed -e 's|sunos5|solaris2|'`
-- ;;
-- -sunos6*)
-- os=`echo $os | sed -e 's|sunos6|solaris3|'`
-- ;;
-- -osfrose*)
-- os=-osfrose
-- ;;
-- -osf*)
-- os=-osf
-- ;;
-- -utek*)
-- os=-bsd
-- ;;
-- -dynix*)
-- os=-bsd
-- ;;
-- -acis*)
-- os=-aos
-- ;;
-- -386bsd)
-- os=-bsd
-- ;;
-- -ctix* | -uts*)
-- os=-sysv
-- ;;
-- -ns2 )
-- os=-nextstep2
-- ;;
-- # Preserve the version number of sinix5.
-- -sinix5.*)
-- os=`echo $os | sed -e 's|sinix|sysv|'`
-- ;;
-- -sinix*)
-- os=-sysv4
-- ;;
-- -triton*)
-- os=-sysv3
-- ;;
-- -oss*)
-- os=-sysv3
-- ;;
-- -svr4)
-- os=-sysv4
-- ;;
-- -svr3)
-- os=-sysv3
-- ;;
-- -sysvr4)
-- os=-sysv4
-- ;;
-- # This must come after -sysvr4.
-- -sysv*)
-- ;;
-- -ose*)
-- os=-ose
-- ;;
-- -es1800*)
-- os=-ose
-- ;;
-- -xenix)
-- os=-xenix
-- ;;
-- -*mint | -*MiNT)
-- os=-mint
-- ;;
-- -none)
-- ;;
-- *)
-- # Get rid of the `-' at the beginning of $os.
-- os=`echo $os | sed 's/[^-]*-//'`
-- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-- exit 1
-- ;;
--esac
--else
--
--# Here we handle the default operating systems that come with various machines.
--# The value should be what the vendor currently ships out the door with their
--# machine or put another way, the most popular os provided with the machine.
--
--# Note that if you're going to try to match "-MANUFACTURER" here (say,
--# "-sun"), then you have to tell the case statement up towards the top
--# that MANUFACTURER isn't an operating system. Otherwise, code above
--# will signal an error saying that MANUFACTURER isn't an operating
--# system, and we'll never get to this point.
--
--case $basic_machine in
-- *-acorn)
-- os=-riscix1.2
-- ;;
-- arm*-corel)
-- os=-linux
-- ;;
-- arm*-semi)
-- os=-aout
-- ;;
-- pdp11-*)
-- os=-none
-- ;;
-- *-dec | vax-*)
-- os=-ultrix4.2
-- ;;
-- m68*-apollo)
-- os=-domain
-- ;;
-- i386-sun)
-- os=-sunos4.0.2
-- ;;
-- m68000-sun)
-- os=-sunos3
-- # This also exists in the configure program, but was not the
-- # default.
-- # os=-sunos4
-- ;;
-- m68*-cisco)
-- os=-aout
-- ;;
-- mips*-cisco)
-- os=-elf
-- ;;
-- mips*-*)
-- os=-elf
-- ;;
-- *-tti) # must be before sparc entry or we get the wrong os.
-- os=-sysv3
-- ;;
-- sparc-* | *-sun)
-- os=-sunos4.1.1
-- ;;
-- *-be)
-- os=-beos
-- ;;
-- *-ibm)
-- os=-aix
-- ;;
-- *-wec)
-- os=-proelf
-- ;;
-- *-winbond)
-- os=-proelf
-- ;;
-- *-oki)
-- os=-proelf
-- ;;
-- *-hp)
-- os=-hpux
-- ;;
-- *-hitachi)
-- os=-hiux
-- ;;
-- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-- os=-sysv
-- ;;
-- *-cbm)
-- os=-amigaos
-- ;;
-- *-dg)
-- os=-dgux
-- ;;
-- *-dolphin)
-- os=-sysv3
-- ;;
-- m68k-ccur)
-- os=-rtu
-- ;;
-- m88k-omron*)
-- os=-luna
-- ;;
-- *-next )
-- os=-nextstep
-- ;;
-- *-sequent)
-- os=-ptx
-- ;;
-- *-crds)
-- os=-unos
-- ;;
-- *-ns)
-- os=-genix
-- ;;
-- i370-*)
-- os=-mvs
-- ;;
-- *-next)
-- os=-nextstep3
-- ;;
-- *-gould)
-- os=-sysv
-- ;;
-- *-highlevel)
-- os=-bsd
-- ;;
-- *-encore)
-- os=-bsd
-- ;;
-- *-sgi)
-- os=-irix
-- ;;
-- *-siemens)
-- os=-sysv4
-- ;;
-- *-masscomp)
-- os=-rtu
-- ;;
-- f301-fujitsu)
-- os=-uxpv
-- ;;
-- *-rom68k)
-- os=-coff
-- ;;
-- *-*bug)
-- os=-coff
-- ;;
-- *-apple)
-- os=-macos
-- ;;
-- *-atari*)
-- os=-mint
-- ;;
-- *)
-- os=-none
-- ;;
--esac
--fi
--
--# Here we handle the case where we know the os, and the CPU type, but not the
--# manufacturer. We pick the logical manufacturer.
--vendor=unknown
--case $basic_machine in
-- *-unknown)
-- case $os in
-- -riscix*)
-- vendor=acorn
-- ;;
-- -sunos*)
-- vendor=sun
-- ;;
-- -aix*)
-- vendor=ibm
-- ;;
-- -beos*)
-- vendor=be
-- ;;
-- -hpux*)
-- vendor=hp
-- ;;
-- -mpeix*)
-- vendor=hp
-- ;;
-- -hiux*)
-- vendor=hitachi
-- ;;
-- -unos*)
-- vendor=crds
-- ;;
-- -dgux*)
-- vendor=dg
-- ;;
-- -luna*)
-- vendor=omron
-- ;;
-- -genix*)
-- vendor=ns
-- ;;
-- -mvs*)
-- vendor=ibm
-- ;;
-- -ptx*)
-- vendor=sequent
-- ;;
-- -vxsim* | -vxworks*)
-- vendor=wrs
-- ;;
-- -aux*)
-- vendor=apple
-- ;;
-- -hms*)
-- vendor=hitachi
-- ;;
-- -mpw* | -macos*)
-- vendor=apple
-- ;;
-- -*mint | -*MiNT)
-- vendor=atari
-- ;;
-- esac
-- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-- ;;
--esac
--
--echo $basic_machine$os
-diff -urNd -urNd patch-2.5.4/configure patch-2.5.9/configure
---- patch-2.5.4/configure 1999-08-30 02:44:34.000000000 -0400
-+++ patch-2.5.9/configure 2003-05-19 02:50:21.000000000 -0400
-@@ -1,28 +1,326 @@
- #! /bin/sh
--
- # Guess values for system-dependent variables and create Makefiles.
--# Generated automatically using autoconf version 2.13
--# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-+# Generated by GNU Autoconf 2.57 for patch 2.5.9.
- #
-+# Report bugs to <bug-patch at gnu.org>.
-+#
-+# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-+# Free Software Foundation, Inc.
- # This configure script is free software; the Free Software Foundation
- # gives unlimited permission to copy, distribute and modify it.
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-
--# Defaults:
--ac_help=
-+# Be Bourne compatible
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-+ set -o posix
-+fi
-+
-+# Support unset when possible.
-+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+$as_unset ENV MAIL MAILPATH
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
-+do
-+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ $as_unset $as_var
-+ fi
-+done
-+
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-+
-+
-+# Name of the executable.
-+as_me=`$as_basename "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)$' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-+ /^X\/\(\/\/\)$/{ s//\1/; q; }
-+ /^X\/\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+
-+
-+# PATH needs CR, and LINENO needs CR and PATH.
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
-+fi
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" || {
-+ # Find who we are. Look in the path if we contain no path at all
-+ # relative or not.
-+ case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+
-+ ;;
-+ esac
-+ # We did not find ourselves, most probably we were run as `sh COMMAND'
-+ # in which case we are not to be found in the path.
-+ if test "x$as_myself" = x; then
-+ as_myself=$0
-+ fi
-+ if test ! -f "$as_myself"; then
-+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-+ { (exit 1); exit 1; }; }
-+ fi
-+ case $CONFIG_SHELL in
-+ '')
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for as_base in sh bash ksh sh5; do
-+ case $as_dir in
-+ /*)
-+ if ("$as_dir/$as_base" -c '
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-+ CONFIG_SHELL=$as_dir/$as_base
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-+ fi;;
-+ esac
-+ done
-+done
-+;;
-+ esac
-+
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line before each line; the second 'sed' does the real
-+ # work. The second script uses 'N' to pair each line-number line
-+ # with the numbered line, and appends trailing '-' during
-+ # substitution so that $LINENO is not a special case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-+ sed '=' <$as_myself |
-+ sed '
-+ N
-+ s,$,-,
-+ : loop
-+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ t loop
-+ s,-$,,
-+ s,^['$as_cr_digits']*\n,,
-+ ' >$as_me.lineno &&
-+ chmod +x $as_me.lineno ||
-+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensible to this).
-+ . ./$as_me.lineno
-+ # Exit status is that of the last command.
-+ exit
-+}
-+
-+
-+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-+ *c*,-n*) ECHO_N= ECHO_C='
-+' ECHO_T=' ' ;;
-+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ # We could just check for DJGPP; but this test a) works b) is more generic
-+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-+ if test -f conf$$.exe; then
-+ # Don't use ln at all; we don't have any links
-+ as_ln_s='cp -p'
-+ else
-+ as_ln_s='ln -s'
-+ fi
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+else
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.file
-+
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
-+else
-+ as_mkdir_p=false
-+fi
-+
-+as_executable_p="test -f"
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.
-+as_nl='
-+'
-+IFS=" $as_nl"
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+
-+# Name of the host.
-+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-+# so uname gets run too.
-+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-+
-+exec 6>&1
-+
-+#
-+# Initializations.
-+#
- ac_default_prefix=/usr/local
--# Any additions from configure.in:
--ac_help="$ac_help
-- --disable-largefile omit support for large files"
-+ac_config_libobj_dir=.
-+cross_compiling=no
-+subdirs=
-+MFLAGS=
-+MAKEFLAGS=
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+
-+# Maximum number of lines to put in a shell here document.
-+# This variable seems obsolete. It should probably be removed, and
-+# only ac_max_sed_lines should be used.
-+: ${ac_max_here_lines=38}
-+
-+# Identity of this package.
-+PACKAGE_NAME='patch'
-+PACKAGE_TARNAME='patch'
-+PACKAGE_VERSION='2.5.9'
-+PACKAGE_STRING='patch 2.5.9'
-+PACKAGE_BUGREPORT='bug-patch at gnu.org'
-+
-+ac_unique_file="patch.c"
-+# Factoring default headers for most tests.
-+ac_includes_default="\
-+#include <stdio.h>
-+#if HAVE_SYS_TYPES_H
-+# include <sys/types.h>
-+#endif
-+#if HAVE_SYS_STAT_H
-+# include <sys/stat.h>
-+#endif
-+#if STDC_HEADERS
-+# include <stdlib.h>
-+# include <stddef.h>
-+#else
-+# if HAVE_STDLIB_H
-+# include <stdlib.h>
-+# endif
-+#endif
-+#if HAVE_STRING_H
-+# if !STDC_HEADERS && HAVE_MEMORY_H
-+# include <memory.h>
-+# endif
-+# include <string.h>
-+#endif
-+#if HAVE_STRINGS_H
-+# include <strings.h>
-+#endif
-+#if HAVE_INTTYPES_H
-+# include <inttypes.h>
-+#else
-+# if HAVE_STDINT_H
-+# include <stdint.h>
-+# endif
-+#endif
-+#if HAVE_UNISTD_H
-+# include <unistd.h>
-+#endif"
-+
-+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA SET_MAKE ed_PROGRAM EGREP STDBOOL_H HAVE__BOOL LIBOBJS LTLIBOBJS'
-+ac_subst_files=''
-
- # Initialize some variables set by options.
-+ac_init_help=
-+ac_init_version=false
- # The variables have the same names as the options, with
- # dashes changed to underlines.
--build=NONE
--cache_file=./config.cache
-+cache_file=/dev/null
- exec_prefix=NONE
--host=NONE
- no_create=
--nonopt=NONE
- no_recursion=
- prefix=NONE
- program_prefix=NONE
-@@ -31,10 +329,15 @@
- silent=
- site=
- srcdir=
--target=NONE
- verbose=
- x_includes=NONE
- x_libraries=NONE
-+
-+# Installation directory options.
-+# These are left unexpanded so users can "make install exec_prefix=/foo"
-+# and all the variables that are supposed to be based on exec_prefix
-+# by default will actually change.
-+# Use braces instead of parens because sh, perl, etc. also accept them.
- bindir='${exec_prefix}/bin'
- sbindir='${exec_prefix}/sbin'
- libexecdir='${exec_prefix}/libexec'
-@@ -48,17 +351,9 @@
- infodir='${prefix}/info'
- mandir='${prefix}/man'
-
--# Initialize some other variables.
--subdirs=
--MFLAGS= MAKEFLAGS=
--SHELL=${CONFIG_SHELL-/bin/sh}
--# Maximum number of lines to put in a shell here document.
--ac_max_here_lines=12
--
- ac_prev=
- for ac_option
- do
--
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
-@@ -66,59 +361,59 @@
- continue
- fi
-
-- case "$ac_option" in
-- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-- *) ac_optarg= ;;
-- esac
-+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
-- case "$ac_option" in
-+ case $ac_option in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-- bindir="$ac_optarg" ;;
-+ bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
-- ac_prev=build ;;
-+ ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-- build="$ac_optarg" ;;
-+ build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-- cache_file="$ac_optarg" ;;
-+ cache_file=$ac_optarg ;;
-+
-+ --config-cache | -C)
-+ cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
-- datadir="$ac_optarg" ;;
-+ datadir=$ac_optarg ;;
-
- -disable-* | --disable-*)
-- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-- fi
-- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-- eval "enable_${ac_feature}=no" ;;
-+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-+ eval "enable_$ac_feature=no" ;;
-
- -enable-* | --enable-*)
-- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-- fi
-- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-- case "$ac_option" in
-- *=*) ;;
-+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-+ case $ac_option in
-+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
-- eval "enable_${ac_feature}='$ac_optarg'" ;;
-+ eval "enable_$ac_feature='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-@@ -127,95 +422,47 @@
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
-- exec_prefix="$ac_optarg" ;;
-+ exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
-- -help | --help | --hel | --he)
-- # Omit some internal or obsolete options to make the list less imposing.
-- # This message is too long to be a string in the A/UX 3.1 sh.
-- cat << EOF
--Usage: configure [options] [host]
--Options: [defaults in brackets after descriptions]
--Configuration:
-- --cache-file=FILE cache test results in FILE
-- --help print this message
-- --no-create do not create output files
-- --quiet, --silent do not print \`checking...' messages
-- --version print the version of autoconf that created configure
--Directory and file names:
-- --prefix=PREFIX install architecture-independent files in PREFIX
-- [$ac_default_prefix]
-- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-- [same as prefix]
-- --bindir=DIR user executables in DIR [EPREFIX/bin]
-- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
-- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
-- --datadir=DIR read-only architecture-independent data in DIR
-- [PREFIX/share]
-- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
-- --sharedstatedir=DIR modifiable architecture-independent data in DIR
-- [PREFIX/com]
-- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
-- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
-- --includedir=DIR C header files in DIR [PREFIX/include]
-- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
-- --infodir=DIR info documentation in DIR [PREFIX/info]
-- --mandir=DIR man documentation in DIR [PREFIX/man]
-- --srcdir=DIR find the sources in DIR [configure dir or ..]
-- --program-prefix=PREFIX prepend PREFIX to installed program names
-- --program-suffix=SUFFIX append SUFFIX to installed program names
-- --program-transform-name=PROGRAM
-- run sed PROGRAM on installed program names
--EOF
-- cat << EOF
--Host type:
-- --build=BUILD configure for building on BUILD [BUILD=HOST]
-- --host=HOST configure for HOST [guessed]
-- --target=TARGET configure for TARGET [TARGET=HOST]
--Features and packages:
-- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
-- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
-- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
-- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
-- --x-includes=DIR X include files are in DIR
-- --x-libraries=DIR X library files are in DIR
--EOF
-- if test -n "$ac_help"; then
-- echo "--enable and --with options recognized:$ac_help"
-- fi
-- exit 0 ;;
-+ -help | --help | --hel | --he | -h)
-+ ac_init_help=long ;;
-+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-+ ac_init_help=recursive ;;
-+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-+ ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
-- ac_prev=host ;;
-+ ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
-- host="$ac_optarg" ;;
-+ host_alias=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
-- includedir="$ac_optarg" ;;
-+ includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-- infodir="$ac_optarg" ;;
-+ infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
-- libdir="$ac_optarg" ;;
-+ libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
-- libexecdir="$ac_optarg" ;;
-+ libexecdir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
-@@ -224,19 +471,19 @@
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-- localstatedir="$ac_optarg" ;;
-+ localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-- mandir="$ac_optarg" ;;
-+ mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-- | --no-cr | --no-c)
-+ | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-@@ -250,26 +497,26 @@
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-- oldincludedir="$ac_optarg" ;;
-+ oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-- prefix="$ac_optarg" ;;
-+ prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-- program_prefix="$ac_optarg" ;;
-+ program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-- program_suffix="$ac_optarg" ;;
-+ program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
-@@ -286,7 +533,7 @@
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
-- program_transform_name="$ac_optarg" ;;
-+ program_transform_name=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
-@@ -296,7 +543,7 @@
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
-- sbindir="$ac_optarg" ;;
-+ sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-@@ -307,58 +554,57 @@
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
-- sharedstatedir="$ac_optarg" ;;
-+ sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
-- site="$ac_optarg" ;;
-+ site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-- srcdir="$ac_optarg" ;;
-+ srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-- sysconfdir="$ac_optarg" ;;
-+ sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
-- ac_prev=target ;;
-+ ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-- target="$ac_optarg" ;;
-+ target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
-- -version | --version | --versio | --versi | --vers)
-- echo "configure generated by autoconf version 2.13"
-- exit 0 ;;
-+ -version | --version | --versio | --versi | --vers | -V)
-+ ac_init_version=: ;;
-
- -with-* | --with-*)
-- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-- fi
-+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- case "$ac_option" in
-- *=*) ;;
-+ case $ac_option in
-+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
-- eval "with_${ac_package}='$ac_optarg'" ;;
-+ eval "with_$ac_package='$ac_optarg'" ;;
-
- -without-* | --without-*)
-- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-- fi
-- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- eval "with_${ac_package}=no" ;;
-+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_package=`echo $ac_package | sed 's/-/_/g'`
-+ eval "with_$ac_package=no" ;;
-
- --x)
- # Obsolete; use --with-x.
-@@ -369,99 +615,110 @@
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-- x_includes="$ac_optarg" ;;
-+ x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-- x_libraries="$ac_optarg" ;;
-+ x_libraries=$ac_optarg ;;
-
-- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-+ -*) { echo "$as_me: error: unrecognized option: $ac_option
-+Try \`$0 --help' for more information." >&2
-+ { (exit 1); exit 1; }; }
- ;;
-
-+ *=*)
-+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-+ # Reject names that are not valid shell variable names.
-+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-+ { (exit 1); exit 1; }; }
-+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-+ eval "$ac_envvar='$ac_optarg'"
-+ export $ac_envvar ;;
-+
- *)
-- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-- echo "configure: warning: $ac_option: invalid host type" 1>&2
-- fi
-- if test "x$nonopt" != xNONE; then
-- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-- fi
-- nonopt="$ac_option"
-+ # FIXME: should be removed in autoconf 3.0.
-+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
- done
-
- if test -n "$ac_prev"; then
-- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
--fi
--
--trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
--
--# File descriptor usage:
--# 0 standard input
--# 1 file creation
--# 2 errors and warnings
--# 3 some systems may open it to /dev/tty
--# 4 used on the Kubota Titan
--# 6 checking for... messages and results
--# 5 compiler messages saved in config.log
--if test "$silent" = yes; then
-- exec 6>/dev/null
--else
-- exec 6>&1
-+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-+ { echo "$as_me: error: missing argument to $ac_option" >&2
-+ { (exit 1); exit 1; }; }
- fi
--exec 5>./config.log
-
--echo "\
--This file contains any messages produced by compilers while
--running configure, to aid debugging if configure makes a mistake.
--" 1>&5
-+# Be sure to have absolute paths.
-+for ac_var in exec_prefix prefix
-+do
-+ eval ac_val=$`echo $ac_var`
-+ case $ac_val in
-+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; };;
-+ esac
-+done
-
--# Strip out --no-create and --no-recursion so they do not pile up.
--# Also quote any args containing shell metacharacters.
--ac_configure_args=
--for ac_arg
-+# Be sure to have absolute paths.
-+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-+ localstatedir libdir includedir oldincludedir infodir mandir
- do
-- case "$ac_arg" in
-- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-- | --no-cr | --no-c) ;;
-- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-+ eval ac_val=$`echo $ac_var`
-+ case $ac_val in
-+ [\\/$]* | ?:[\\/]* ) ;;
-+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; };;
- esac
- done
-
--# NLS nuisances.
--# Only set these to C if already set. These must not be set unconditionally
--# because not all systems understand e.g. LANG=C (notably SCO).
--# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
--# Non-C LC_CTYPE values break the ctype check.
--if test "${LANG+set}" = set; then LANG=C; export LANG; fi
--if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
--if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
--if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
-+# There might be people who depend on the old broken behavior: `$host'
-+# used to hold the argument of --host etc.
-+# FIXME: To remove some day.
-+build=$build_alias
-+host=$host_alias
-+target=$target_alias
-
--# confdefs.h avoids OS command line length limits that DEFS can exceed.
--rm -rf conftest* confdefs.h
--# AIX cpp loses on an empty file, so make sure it contains at least a newline.
--echo > confdefs.h
-+# FIXME: To remove some day.
-+if test "x$host_alias" != x; then
-+ if test "x$build_alias" = x; then
-+ cross_compiling=maybe
-+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-+ If a cross compiler is detected then cross compile mode will be used." >&2
-+ elif test "x$build_alias" != "x$host_alias"; then
-+ cross_compiling=yes
-+ fi
-+fi
-+
-+ac_tool_prefix=
-+test -n "$host_alias" && ac_tool_prefix=$host_alias-
-+
-+test "$silent" = yes && exec 6>/dev/null
-
--# A filename unique to this package, relative to the directory that
--# configure is in, which we can look for to find out if srcdir is correct.
--ac_unique_file=patch.c
-
- # Find the source files, if location was not specified.
- if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
-- ac_prog=$0
-- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-+ ac_confdir=`(dirname "$0") 2>/dev/null ||
-+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$0" : 'X\(//\)[^/]' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$0" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
-@@ -471,13 +728,437 @@
- fi
- if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
-- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-+ { (exit 1); exit 1; }; }
- else
-- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+ { (exit 1); exit 1; }; }
- fi
- fi
--srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-+ { (exit 1); exit 1; }; }
-+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-+ac_env_build_alias_set=${build_alias+set}
-+ac_env_build_alias_value=$build_alias
-+ac_cv_env_build_alias_set=${build_alias+set}
-+ac_cv_env_build_alias_value=$build_alias
-+ac_env_host_alias_set=${host_alias+set}
-+ac_env_host_alias_value=$host_alias
-+ac_cv_env_host_alias_set=${host_alias+set}
-+ac_cv_env_host_alias_value=$host_alias
-+ac_env_target_alias_set=${target_alias+set}
-+ac_env_target_alias_value=$target_alias
-+ac_cv_env_target_alias_set=${target_alias+set}
-+ac_cv_env_target_alias_value=$target_alias
-+ac_env_CC_set=${CC+set}
-+ac_env_CC_value=$CC
-+ac_cv_env_CC_set=${CC+set}
-+ac_cv_env_CC_value=$CC
-+ac_env_CFLAGS_set=${CFLAGS+set}
-+ac_env_CFLAGS_value=$CFLAGS
-+ac_cv_env_CFLAGS_set=${CFLAGS+set}
-+ac_cv_env_CFLAGS_value=$CFLAGS
-+ac_env_LDFLAGS_set=${LDFLAGS+set}
-+ac_env_LDFLAGS_value=$LDFLAGS
-+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-+ac_cv_env_LDFLAGS_value=$LDFLAGS
-+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-+ac_env_CPPFLAGS_value=$CPPFLAGS
-+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-+ac_env_CPP_set=${CPP+set}
-+ac_env_CPP_value=$CPP
-+ac_cv_env_CPP_set=${CPP+set}
-+ac_cv_env_CPP_value=$CPP
-+
-+#
-+# Report the --help message.
-+#
-+if test "$ac_init_help" = "long"; then
-+ # Omit some internal or obsolete options to make the list less imposing.
-+ # This message is too long to be a string in the A/UX 3.1 sh.
-+ cat <<_ACEOF
-+\`configure' configures patch 2.5.9 to adapt to many kinds of systems.
-+
-+Usage: $0 [OPTION]... [VAR=VALUE]...
-+
-+To assign environment variables (e.g., CC, CFLAGS...), specify them as
-+VAR=VALUE. See below for descriptions of some of the useful variables.
-+
-+Defaults for the options are specified in brackets.
-+
-+Configuration:
-+ -h, --help display this help and exit
-+ --help=short display options specific to this package
-+ --help=recursive display the short help of all the included packages
-+ -V, --version display version information and exit
-+ -q, --quiet, --silent do not print \`checking...' messages
-+ --cache-file=FILE cache test results in FILE [disabled]
-+ -C, --config-cache alias for \`--cache-file=config.cache'
-+ -n, --no-create do not create output files
-+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
-+
-+_ACEOF
-+
-+ cat <<_ACEOF
-+Installation directories:
-+ --prefix=PREFIX install architecture-independent files in PREFIX
-+ [$ac_default_prefix]
-+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-+ [PREFIX]
-+
-+By default, \`make install' will install all the files in
-+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-+for instance \`--prefix=\$HOME'.
-+
-+For better control, use the options below.
-+
-+Fine tuning of the installation directories:
-+ --bindir=DIR user executables [EPREFIX/bin]
-+ --sbindir=DIR system admin executables [EPREFIX/sbin]
-+ --libexecdir=DIR program executables [EPREFIX/libexec]
-+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
-+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
-+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
-+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
-+ --libdir=DIR object code libraries [EPREFIX/lib]
-+ --includedir=DIR C header files [PREFIX/include]
-+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
-+ --infodir=DIR info documentation [PREFIX/info]
-+ --mandir=DIR man documentation [PREFIX/man]
-+_ACEOF
-+
-+ cat <<\_ACEOF
-+
-+Program names:
-+ --program-prefix=PREFIX prepend PREFIX to installed program names
-+ --program-suffix=SUFFIX append SUFFIX to installed program names
-+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-+_ACEOF
-+fi
-+
-+if test -n "$ac_init_help"; then
-+ case $ac_init_help in
-+ short | recursive ) echo "Configuration of patch 2.5.9:";;
-+ esac
-+ cat <<\_ACEOF
-+
-+Optional Features:
-+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
-+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
-+ --disable-largefile omit support for large files
-+
-+Some influential environment variables:
-+ CC C compiler command
-+ CFLAGS C compiler flags
-+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
-+ nonstandard directory <lib dir>
-+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
-+ headers in a nonstandard directory <include dir>
-+ CPP C preprocessor
-+
-+Use these variables to override the choices made by `configure' or to help
-+it to find libraries and programs with nonstandard names/locations.
-+
-+Report bugs to <bug-patch at gnu.org>.
-+_ACEOF
-+fi
-+
-+if test "$ac_init_help" = "recursive"; then
-+ # If there are subdirs, report their specific --help.
-+ ac_popdir=`pwd`
-+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-+ test -d $ac_dir || continue
-+ ac_builddir=.
-+
-+if test "$ac_dir" != .; then
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A "../" for each directory in $ac_dir_suffix.
-+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-+else
-+ ac_dir_suffix= ac_top_builddir=
-+fi
-+
-+case $srcdir in
-+ .) # No --srcdir option. We are building in place.
-+ ac_srcdir=.
-+ if test -z "$ac_top_builddir"; then
-+ ac_top_srcdir=.
-+ else
-+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-+ fi ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir ;;
-+ *) # Relative path.
-+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+esac
-+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-+# absolute.
-+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
-+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-+
-+ cd $ac_dir
-+ # Check for guested configure; otherwise get Cygnus style configure.
-+ if test -f $ac_srcdir/configure.gnu; then
-+ echo
-+ $SHELL $ac_srcdir/configure.gnu --help=recursive
-+ elif test -f $ac_srcdir/configure; then
-+ echo
-+ $SHELL $ac_srcdir/configure --help=recursive
-+ elif test -f $ac_srcdir/configure.ac ||
-+ test -f $ac_srcdir/configure.in; then
-+ echo
-+ $ac_configure --help
-+ else
-+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-+ fi
-+ cd $ac_popdir
-+ done
-+fi
-+
-+test -n "$ac_init_help" && exit 0
-+if $ac_init_version; then
-+ cat <<\_ACEOF
-+patch configure 2.5.9
-+generated by GNU Autoconf 2.57
-+
-+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-+Free Software Foundation, Inc.
-+This configure script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it.
-+_ACEOF
-+ exit 0
-+fi
-+exec 5>config.log
-+cat >&5 <<_ACEOF
-+This file contains any messages produced by compilers while
-+running configure, to aid debugging if configure makes a mistake.
-+
-+It was created by patch $as_me 2.5.9, which was
-+generated by GNU Autoconf 2.57. Invocation command line was
-+
-+ $ $0 $@
-+
-+_ACEOF
-+{
-+cat <<_ASUNAME
-+## --------- ##
-+## Platform. ##
-+## --------- ##
-+
-+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-+uname -m = `(uname -m) 2>/dev/null || echo unknown`
-+uname -r = `(uname -r) 2>/dev/null || echo unknown`
-+uname -s = `(uname -s) 2>/dev/null || echo unknown`
-+uname -v = `(uname -v) 2>/dev/null || echo unknown`
-+
-+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-+
-+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-+
-+_ASUNAME
-+
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ echo "PATH: $as_dir"
-+done
-+
-+} >&5
-+
-+cat >&5 <<_ACEOF
-+
-+
-+## ----------- ##
-+## Core tests. ##
-+## ----------- ##
-+
-+_ACEOF
-+
-+
-+# Keep a trace of the command line.
-+# Strip out --no-create and --no-recursion so they do not pile up.
-+# Strip out --silent because we don't want to record it for future runs.
-+# Also quote any args containing shell meta-characters.
-+# Make two passes to allow for proper duplicate-argument suppression.
-+ac_configure_args=
-+ac_configure_args0=
-+ac_configure_args1=
-+ac_sep=
-+ac_must_keep_next=false
-+for ac_pass in 1 2
-+do
-+ for ac_arg
-+ do
-+ case $ac_arg in
-+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil)
-+ continue ;;
-+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ esac
-+ case $ac_pass in
-+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-+ 2)
-+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-+ if test $ac_must_keep_next = true; then
-+ ac_must_keep_next=false # Got value, back to normal.
-+ else
-+ case $ac_arg in
-+ *=* | --config-cache | -C | -disable-* | --disable-* \
-+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-+ | -with-* | --with-* | -without-* | --without-* | --x)
-+ case "$ac_configure_args0 " in
-+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-+ esac
-+ ;;
-+ -* ) ac_must_keep_next=true ;;
-+ esac
-+ fi
-+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-+ # Get rid of the leading space.
-+ ac_sep=" "
-+ ;;
-+ esac
-+ done
-+done
-+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-+
-+# When interrupted or exit'd, cleanup temporary files, and complete
-+# config.log. We remove comments because anyway the quotes in there
-+# would cause problems or look ugly.
-+# WARNING: Be sure not to use single quotes in there, as some shells,
-+# such as our DU 5.0 friend, will then `close' the trap.
-+trap 'exit_status=$?
-+ # Save into config.log some information that might help in debugging.
-+ {
-+ echo
-+
-+ cat <<\_ASBOX
-+## ---------------- ##
-+## Cache variables. ##
-+## ---------------- ##
-+_ASBOX
-+ echo
-+ # The following way of writing the cache mishandles newlines in values,
-+{
-+ (set) 2>&1 |
-+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-+ *ac_space=\ *)
-+ sed -n \
-+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-+ ;;
-+ *)
-+ sed -n \
-+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ ;;
-+ esac;
-+}
-+ echo
-+
-+ cat <<\_ASBOX
-+## ----------------- ##
-+## Output variables. ##
-+## ----------------- ##
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_vars
-+ do
-+ eval ac_val=$`echo $ac_var`
-+ echo "$ac_var='"'"'$ac_val'"'"'"
-+ done | sort
-+ echo
-+
-+ if test -n "$ac_subst_files"; then
-+ cat <<\_ASBOX
-+## ------------- ##
-+## Output files. ##
-+## ------------- ##
-+_ASBOX
-+ echo
-+ for ac_var in $ac_subst_files
-+ do
-+ eval ac_val=$`echo $ac_var`
-+ echo "$ac_var='"'"'$ac_val'"'"'"
-+ done | sort
-+ echo
-+ fi
-+
-+ if test -s confdefs.h; then
-+ cat <<\_ASBOX
-+## ----------- ##
-+## confdefs.h. ##
-+## ----------- ##
-+_ASBOX
-+ echo
-+ sed "/^$/d" confdefs.h | sort
-+ echo
-+ fi
-+ test "$ac_signal" != 0 &&
-+ echo "$as_me: caught signal $ac_signal"
-+ echo "$as_me: exit $exit_status"
-+ } >&5
-+ rm -f core core.* *.core &&
-+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-+ exit $exit_status
-+ ' 0
-+for ac_signal in 1 2 13 15; do
-+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-+done
-+ac_signal=0
-+
-+# confdefs.h avoids OS command line length limits that DEFS can exceed.
-+rm -rf conftest* confdefs.h
-+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-+echo >confdefs.h
-+
-+# Predefined preprocessor variables.
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_NAME "$PACKAGE_NAME"
-+_ACEOF
-
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_VERSION "$PACKAGE_VERSION"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_STRING "$PACKAGE_STRING"
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-+_ACEOF
-+
-+
-+# Let the site file select an alternate cache file if it wants to.
- # Prefer explicitly selected file to automatically selected ones.
- if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
-@@ -488,321 +1169,767 @@
- fi
- for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
-- echo "loading site script $ac_site_file"
-+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-+echo "$as_me: loading site script $ac_site_file" >&6;}
-+ sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
- done
-
- if test -r "$cache_file"; then
-- echo "loading cache $cache_file"
-- . $cache_file
-+ # Some versions of bash will fail to source /dev/null (special
-+ # files actually), so we avoid doing that.
-+ if test -f "$cache_file"; then
-+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-+echo "$as_me: loading cache $cache_file" >&6;}
-+ case $cache_file in
-+ [\\/]* | ?:[\\/]* ) . $cache_file;;
-+ *) . ./$cache_file;;
-+ esac
-+ fi
- else
-- echo "creating cache $cache_file"
-- > $cache_file
-+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-+echo "$as_me: creating cache $cache_file" >&6;}
-+ >$cache_file
-+fi
-+
-+# Check that the precious variables saved in the cache have kept the same
-+# value.
-+ac_cache_corrupted=false
-+for ac_var in `(set) 2>&1 |
-+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
-+ eval ac_new_set=\$ac_env_${ac_var}_set
-+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-+ eval ac_new_val="\$ac_env_${ac_var}_value"
-+ case $ac_old_set,$ac_new_set in
-+ set,)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,set)
-+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-+ ac_cache_corrupted=: ;;
-+ ,);;
-+ *)
-+ if test "x$ac_old_val" != "x$ac_new_val"; then
-+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-+echo "$as_me: former value: $ac_old_val" >&2;}
-+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-+echo "$as_me: current value: $ac_new_val" >&2;}
-+ ac_cache_corrupted=:
-+ fi;;
-+ esac
-+ # Pass precious variables to config.status.
-+ if test "$ac_new_set" = set; then
-+ case $ac_new_val in
-+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *) ac_arg=$ac_var=$ac_new_val ;;
-+ esac
-+ case " $ac_configure_args " in
-+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
-+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-+ esac
-+ fi
-+done
-+if $ac_cache_corrupted; then
-+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-
- ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
--ac_exeext=
--ac_objext=o
--if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-- # Stardent Vistra SVR4 grep lacks -e, says ghazi at caip.rutgers.edu.
-- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-- ac_n= ac_c='
--' ac_t=' '
-- else
-- ac_n=-n ac_c= ac_t=
-- fi
--else
-- ac_n= ac_c='\c' ac_t=
--fi
-
-
-
--if test "$program_transform_name" = s,x,x,; then
-- program_transform_name=
--else
-- # Double any \ or $. echo might interpret backslashes.
-- cat <<\EOF_SED > conftestsed
--s,\\,\\\\,g; s,\$,$$,g
--EOF_SED
-- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-- rm -f conftestsed
--fi
--test "$program_prefix" != NONE &&
-- program_transform_name="s,^,${program_prefix},; $program_transform_name"
--# Use a double $ so make ignores it.
--test "$program_suffix" != NONE &&
-- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
--# sed with no file args requires a program.
--test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
--ac_aux_dir=
--for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-- if test -f $ac_dir/install-sh; then
-- ac_aux_dir=$ac_dir
-- ac_install_sh="$ac_aux_dir/install-sh -c"
-- break
-- elif test -f $ac_dir/install.sh; then
-- ac_aux_dir=$ac_dir
-- ac_install_sh="$ac_aux_dir/install.sh -c"
-- break
-- fi
--done
--if test -z "$ac_aux_dir"; then
-- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
--fi
--ac_config_guess=$ac_aux_dir/config.guess
--ac_config_sub=$ac_aux_dir/config.sub
--ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
--# Make sure we can run config.sub.
--if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
--else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
--fi
-
--echo $ac_n "checking host system type""... $ac_c" 1>&6
--echo "configure:573: checking host system type" >&5
-
--host_alias=$host
--case "$host_alias" in
--NONE)
-- case $nonopt in
-- NONE)
-- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-- fi ;;
-- *) host_alias=$nonopt ;;
-- esac ;;
--esac
-
--host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
--host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
--echo "$ac_t""$host" 1>&6
-
-
--PACKAGE=patch
--VERSION=2.5.4
-
-
-
--# Extract the first word of "gcc", so it can be a program name with args.
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+ ac_config_headers="$ac_config_headers config.h:config.hin"
-+
-+test "$program_prefix" != NONE &&
-+ program_transform_name="s,^,$program_prefix,;$program_transform_name"
-+# Use a double $ so make ignores it.
-+test "$program_suffix" != NONE &&
-+ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-+# Double any \ or $. echo might interpret backslashes.
-+# By default was `s,x,x', remove it if useless.
-+cat <<\_ACEOF >conftest.sed
-+s/[\\$]/&&/g;s/;s,x,x,$//
-+_ACEOF
-+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-+rm conftest.sed
-+
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}gcc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$CC"; then
-+ ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+CC=$ac_cv_prog_CC
-+if test -n "$CC"; then
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
-+ # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:602: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="gcc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ CC=$ac_ct_CC
-+else
-+ CC="$ac_cv_prog_CC"
-+fi
-+
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}cc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_CC="gcc"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="${ac_tool_prefix}cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-+fi
-+if test -z "$ac_cv_prog_CC"; then
-+ ac_ct_CC=$CC
-+ # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+ CC=$ac_ct_CC
-+else
-+ CC="$ac_cv_prog_CC"
-+fi
-+
-+fi
- if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:632: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_prog_rejected=no
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-- ac_prog_rejected=yes
-- continue
-- fi
-- ac_cv_prog_CC="cc"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-+ ac_prog_rejected=yes
-+ continue
-+ fi
-+ ac_cv_prog_CC="cc"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
-- if test $# -gt 0; then
-+ if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
-- set dummy "$ac_dir/$ac_word" "$@"
-- shift
-- ac_cv_prog_CC="$@"
-+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
- fi
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-- if test -z "$CC"; then
-- case "`uname -s`" in
-- *win32* | *WIN32*)
-- # Extract the first word of "cl", so it can be a program name with args.
--set dummy cl; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:683: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+if test -z "$CC"; then
-+ if test -n "$ac_tool_prefix"; then
-+ for ac_prog in cl
-+ do
-+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_CC="cl"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- fi
- fi
--CC="$ac_cv_prog_CC"
-+CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$ac_t""$CC" 1>&6
-+ echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-- ;;
-- esac
-+
-+ test -n "$CC" && break
-+ done
-+fi
-+if test -z "$CC"; then
-+ ac_ct_CC=$CC
-+ for ac_prog in cl
-+do
-+ # Extract the first word of "$ac_prog", so it can be a program name with args.
-+set dummy $ac_prog; ac_word=$2
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test -n "$ac_ct_CC"; then
-+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-+else
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_prog_ac_ct_CC="$ac_prog"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
- fi
-- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-+done
-+done
-+
-+fi
-+fi
-+ac_ct_CC=$ac_cv_prog_ac_ct_CC
-+if test -n "$ac_ct_CC"; then
-+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6
-+else
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
--echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
--echo "configure:715: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-+ test -n "$ac_ct_CC" && break
-+done
-
--ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
-+ CC=$ac_ct_CC
-+fi
-
--cat > conftest.$ac_ext << EOF
-+fi
-
--#line 726 "configure"
--#include "confdefs.h"
-
--main(){return(0);}
--EOF
--if { (eval echo configure:731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- ac_cv_prog_cc_works=yes
-- # If we can't run a trivial program, we are probably using a cross compiler.
-- if (./conftest; exit) 2>/dev/null; then
-- ac_cv_prog_cc_cross=no
-+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: no acceptable C compiler found in \$PATH
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+# Provide some information about the compiler.
-+echo "$as_me:$LINENO:" \
-+ "checking for C compiler version" >&5
-+ac_compiler=`set X $ac_compile; echo $2`
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-+ (eval $ac_compiler --version </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-+ (eval $ac_compiler -v </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-+ (eval $ac_compiler -V </dev/null >&5) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files a.out a.exe b.out"
-+# Try to create an executable without -o first, disregard a.out.
-+# It will help us diagnose broken compilers, and finding out an intuition
-+# of exeext.
-+echo "$as_me:$LINENO: checking for C compiler default output" >&5
-+echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
-+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-+ (eval $ac_link_default) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # Find the output, starting from the most likely. This scheme is
-+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-+# resort.
-+
-+# Be careful to initialize this variable, since it used to be cached.
-+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-+ac_cv_exeext=
-+# b.out is created by i960 compilers.
-+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-+do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-+ ;;
-+ conftest.$ac_ext )
-+ # This is the source file.
-+ ;;
-+ [ab].out )
-+ # We found the default executable, but exeext='' is most
-+ # certainly right.
-+ break;;
-+ *.* )
-+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ # FIXME: I believe we export ac_cv_exeext for Libtool,
-+ # but it would be cool to find out if it's true. Does anybody
-+ # maintain Libtool? --akim.
-+ export ac_cv_exeext
-+ break;;
-+ * )
-+ break;;
-+ esac
-+done
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C compiler cannot create executables
-+See \`config.log' for more details." >&2;}
-+ { (exit 77); exit 77; }; }
-+fi
-+
-+ac_exeext=$ac_cv_exeext
-+echo "$as_me:$LINENO: result: $ac_file" >&5
-+echo "${ECHO_T}$ac_file" >&6
-+
-+# Check the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-+# If not cross compiling, check that we can run a simple program.
-+if test "$cross_compiling" != yes; then
-+ if { ac_try='./$ac_file'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ cross_compiling=no
- else
-- ac_cv_prog_cc_cross=yes
-+ if test "$cross_compiling" = maybe; then
-+ cross_compiling=yes
-+ else
-+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot run C compiled programs.
-+If you meant to cross compile, use \`--host'.
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
- fi
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- ac_cv_prog_cc_works=no
- fi
--rm -fr conftest*
--ac_ext=c
--# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
--ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
--cross_compiling=$ac_cv_prog_cc_cross
-+echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-
--echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
--if test $ac_cv_prog_cc_works = no; then
-- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-+rm -f a.out a.exe conftest$ac_cv_exeext b.out
-+ac_clean_files=$ac_clean_files_save
-+# Check the compiler produces executables we can run. If not, either
-+# the compiler is broken, or we cross compile.
-+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-+echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+echo "${ECHO_T}$cross_compiling" >&6
-+
-+echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
-+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-+# work properly (i.e., refer to `conftest.exe'), while it won't with
-+# `rm'.
-+for ac_file in conftest.exe conftest conftest.*; do
-+ test -f "$ac_file" || continue
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ export ac_cv_exeext
-+ break;;
-+ * ) break;;
-+ esac
-+done
-+else
-+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
- fi
--echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
--echo "configure:757: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
--echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
--cross_compiling=$ac_cv_prog_cc_cross
-
--echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
--echo "configure:762: checking whether we are using GNU C" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+rm -f conftest$ac_cv_exeext
-+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+echo "${ECHO_T}$ac_cv_exeext" >&6
-+
-+rm -f conftest.$ac_ext
-+EXEEXT=$ac_cv_exeext
-+ac_exeext=$EXEEXT
-+echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-+if test "${ac_cv_objext+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.c <<EOF
--#ifdef __GNUC__
-- yes;
--#endif
--EOF
--if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:771: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-- ac_cv_prog_gcc=yes
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.o conftest.obj
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-+ break;;
-+ esac
-+done
- else
-- ac_cv_prog_gcc=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: cannot compute suffix of object files: cannot compile
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-+
-+rm -f conftest.$ac_cv_objext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+echo "${ECHO_T}$ac_cv_objext" >&6
-+OBJEXT=$ac_cv_objext
-+ac_objext=$OBJEXT
-+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-+if test "${ac_cv_c_compiler_gnu+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-+int
-+main ()
-+{
-+#ifndef __GNUC__
-+ choke me
-+#endif
-
--if test $ac_cv_prog_gcc = yes; then
-- GCC=yes
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_compiler_gnu=yes
- else
-- GCC=
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_compiler_gnu=no
- fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
--ac_test_CFLAGS="${CFLAGS+set}"
--ac_save_CFLAGS="$CFLAGS"
--CFLAGS=
--echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
--echo "configure:790: checking whether ${CC-cc} accepts -g" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-+GCC=`test $ac_compiler_gnu = yes && echo yes`
-+ac_test_CFLAGS=${CFLAGS+set}
-+ac_save_CFLAGS=$CFLAGS
-+CFLAGS="-g"
-+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-+if test "${ac_cv_prog_cc_g+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- echo 'void f(){}' > conftest.c
--if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
- else
-- ac_cv_prog_cc_g=no
--fi
--rm -f conftest*
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ac_cv_prog_cc_g=no
- fi
--
--echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
- if test "$ac_test_CFLAGS" = set; then
-- CFLAGS="$ac_save_CFLAGS"
-+ CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
-@@ -816,86 +1943,482 @@
- CFLAGS=
- fi
- fi
-+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-+if test "${ac_cv_prog_cc_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_prog_cc_stdc=no
-+ac_save_CC=$CC
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdarg.h>
-+#include <stdio.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-+struct buf { int x; };
-+FILE * (*rcsopen) (struct buf *, struct stat *, int);
-+static char *e (p, i)
-+ char **p;
-+ int i;
-+{
-+ return p[i];
-+}
-+static char *f (char * (*g) (char **, int), char **p, ...)
-+{
-+ char *s;
-+ va_list v;
-+ va_start (v,p);
-+ s = g (p, va_arg (v,int));
-+ va_end (v);
-+ return s;
-+}
-+int test (int i, double x);
-+struct s1 {int (*f) (int a);};
-+struct s2 {int (*f) (double a);};
-+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-+int argc;
-+char **argv;
-+int
-+main ()
-+{
-+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+# Don't try gcc -ansi; that turns off useful extensions and
-+# breaks some systems' header files.
-+# AIX -qlanglvl=ansi
-+# Ultrix and OSF/1 -std1
-+# HP-UX 10.20 and later -Ae
-+# HP-UX older versions -Aa -D_HPUX_SOURCE
-+# SVR4 -Xc -D__EXTENSIONS__
-+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+do
-+ CC="$ac_save_CC $ac_arg"
-+ rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_prog_cc_stdc=$ac_arg
-+break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
--echo "configure:822: checking how to run the C preprocessor" >&5
-+fi
-+rm -f conftest.$ac_objext
-+done
-+rm -f conftest.$ac_ext conftest.$ac_objext
-+CC=$ac_save_CC
-+
-+fi
-+
-+case "x$ac_cv_prog_cc_stdc" in
-+ x|xno)
-+ echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6 ;;
-+ *)
-+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-+ CC="$CC $ac_cv_prog_cc_stdc" ;;
-+esac
-+
-+# Some people use a C++ compiler to compile C. Since we use `exit',
-+# in C++ we need to declare it. In case someone uses the same compiler
-+# for both compiling C and C++ we need to have the C++ compiler decide
-+# the declaration of exit, since it's the most demanding environment.
-+cat >conftest.$ac_ext <<_ACEOF
-+#ifndef __cplusplus
-+ choke me
-+#endif
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ for ac_declaration in \
-+ ''\
-+ '#include <stdlib.h>' \
-+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
-+ 'extern "C" void std::exit (int); using std::exit;' \
-+ 'extern "C" void exit (int) throw ();' \
-+ 'extern "C" void exit (int);' \
-+ 'void exit (int);'
-+do
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+$ac_declaration
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+continue
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_declaration
-+int
-+main ()
-+{
-+exit (42);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+done
-+rm -f conftest*
-+if test -n "$ac_declaration"; then
-+ echo '#ifdef __cplusplus' >>confdefs.h
-+ echo $ac_declaration >>confdefs.h
-+ echo '#endif' >>confdefs.h
-+fi
-+
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
- # On Suns, sometimes $CPP names a directory.
- if test -n "$CPP" && test -d "$CPP"; then
- CPP=
- fi
- if test -z "$CPP"; then
--if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ if test "${ac_cv_prog_CPP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- # This must be in double quotes, not single quotes, because CPP may get
-- # substituted into the Makefile and "${CC-cc}" will confuse make.
-- CPP="${CC-cc} -E"
-+ # Double quotes because CPP needs to be expanded
-+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-+ do
-+ ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
-- # not just through cpp.
-- cat > conftest.$ac_ext <<EOF
--#line 837 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:843: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- :
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+ Syntax error
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP="${CC-cc} -E -traditional-cpp"
-- cat > conftest.$ac_ext <<EOF
--#line 854 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:860: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
- :
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP="${CC-cc} -nologo -E"
-- cat > conftest.$ac_ext <<EOF
--#line 871 "configure"
--#include "confdefs.h"
--#include <assert.h>
--Syntax Error
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:877: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- :
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether non-existent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- CPP=/lib/cpp
-+ ac_cpp_err=yes
- fi
--rm -f conftest*
-+if test -z "$ac_cpp_err"; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
- fi
--rm -f conftest*
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ break
- fi
--rm -f conftest*
-- ac_cv_prog_CPP="$CPP"
-+
-+ done
-+ ac_cv_prog_CPP=$CPP
-+
- fi
-- CPP="$ac_cv_prog_CPP"
-+ CPP=$ac_cv_prog_CPP
- else
-- ac_cv_prog_CPP="$CPP"
-+ ac_cv_prog_CPP=$CPP
- fi
--echo "$ac_t""$CPP" 1>&6
-+echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6
-+ac_preproc_ok=false
-+for ac_c_preproc_warn_flag in '' yes
-+do
-+ # Use a header file that comes with gcc, so configuring glibc
-+ # with a fresh cross-compiler works.
-+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ # <limits.h> exists even on freestanding compilers.
-+ # On the NeXT, cc -E runs the code through the compiler's parser,
-+ # not just through cpp. "Syntax error" is here to catch this case.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+ Syntax error
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Broken: fails on valid input.
-+continue
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+ # OK, works on sane cases. Now check whether non-existent headers
-+ # can be detected and how.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ac_nonexistent.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ # Broken: success on invalid input.
-+continue
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ # Passes both tests.
-+ac_preproc_ok=:
-+break
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+
-+done
-+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-+rm -f conftest.err conftest.$ac_ext
-+if $ac_preproc_ok; then
-+ :
-+else
-+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&5
-+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-+See \`config.log' for more details." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-+
-+ac_aux_dir=
-+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-+ if test -f $ac_dir/install-sh; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/install-sh -c"
-+ break
-+ elif test -f $ac_dir/install.sh; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/install.sh -c"
-+ break
-+ elif test -f $ac_dir/shtool; then
-+ ac_aux_dir=$ac_dir
-+ ac_install_sh="$ac_aux_dir/shtool install -c"
-+ break
-+ fi
-+done
-+if test -z "$ac_aux_dir"; then
-+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
- # Find a good install program. We prefer a C program (faster),
- # so one script is as good as another. But avoid the broken or
-@@ -904,87 +2427,102 @@
- # SunOS /usr/etc/install
- # IRIX /sbin/install
- # AIX /bin/install
-+# AmigaOS /C/install, which installs bootblocks on floppy discs
- # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
- # AFS /usr/afsws/bin/install, which mishandles nonexistent args
- # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
- # ./install, which can be erroneously created by make from ./install.sh.
--echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
--echo "configure:913: checking for a BSD compatible install" >&5
-+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
- if test -z "$INSTALL"; then
--if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test "${ac_cv_path_install+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
-- for ac_dir in $PATH; do
-- # Account for people who put trailing slashes in PATH elements.
-- case "$ac_dir/" in
-- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-- *)
-- # OSF1 and SCO ODT 3.0 have their own names for install.
-- # Don't use installbsd from OSF since it installs stuff as root
-- # by default.
-- for ac_prog in ginstall scoinst install; do
-- if test -f $ac_dir/$ac_prog; then
-- if test $ac_prog = install &&
-- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-- # AIX install. It has an incompatible calling convention.
-- :
-- else
-- ac_cv_path_install="$ac_dir/$ac_prog -c"
-- break 2
-- fi
-- fi
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ # Account for people who put trailing slashes in PATH elements.
-+case $as_dir/ in
-+ ./ | .// | /cC/* | \
-+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-+ /usr/ucb/* ) ;;
-+ *)
-+ # OSF1 and SCO ODT 3.0 have their own names for install.
-+ # Don't use installbsd from OSF since it installs stuff as root
-+ # by default.
-+ for ac_prog in ginstall scoinst install; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-+ if test $ac_prog = install &&
-+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # AIX install. It has an incompatible calling convention.
-+ :
-+ elif test $ac_prog = install &&
-+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-+ # program-specific install script used by HP pwplus--don't use.
-+ :
-+ else
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
-+ fi
-+ fi
- done
-- ;;
-- esac
-- done
-- IFS="$ac_save_IFS"
-+ done
-+ ;;
-+esac
-+done
-+
-
- fi
- if test "${ac_cv_path_install+set}" = set; then
-- INSTALL="$ac_cv_path_install"
-+ INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
-- INSTALL="$ac_install_sh"
-+ INSTALL=$ac_install_sh
- fi
- fi
--echo "$ac_t""$INSTALL" 1>&6
-+echo "$as_me:$LINENO: result: $INSTALL" >&5
-+echo "${ECHO_T}$INSTALL" >&6
-
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
- # It thinks the first close brace ends the variable substitution.
- test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
--test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
- test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
--echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
--echo "configure:966: checking whether ${MAKE-make} sets \${MAKE}" >&5
--set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
-+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftestmake <<\EOF
-+ cat >conftest.make <<\_ACEOF
- all:
-- @echo 'ac_maketemp="${MAKE}"'
--EOF
-+ @echo 'ac_maketemp="$(MAKE)"'
-+_ACEOF
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
--eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
- if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
- else
- eval ac_cv_prog_make_${ac_make}_set=no
- fi
--rm -f conftestmake
-+rm -f conftest.make
- fi
- if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
- SET_MAKE=
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- SET_MAKE="MAKE=${MAKE-make}"
- fi
-
-@@ -992,625 +2530,1355 @@
- # because <errno.h> reserves symbols starting with `E'.
- # Extract the first word of "ed", so it can be a program name with args.
- set dummy ed; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:997: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_path_ed_PROGRAM'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+if test "${ac_cv_path_ed_PROGRAM+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- case "$ed_PROGRAM" in
-- /*)
-+ case $ed_PROGRAM in
-+ [\\/]* | ?:[\\/]*)
- ac_cv_path_ed_PROGRAM="$ed_PROGRAM" # Let the user override the test with a path.
- ;;
-- ?:/*)
-- ac_cv_path_ed_PROGRAM="$ed_PROGRAM" # Let the user override the test with a dos path.
-- ;;
- *)
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_path_ed_PROGRAM="$ac_dir/$ac_word"
-- break
-- fi
-- done
-- IFS="$ac_save_ifs"
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ ac_cv_path_ed_PROGRAM="$as_dir/$ac_word$ac_exec_ext"
-+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+
- test -z "$ac_cv_path_ed_PROGRAM" && ac_cv_path_ed_PROGRAM="ed"
- ;;
- esac
- fi
--ed_PROGRAM="$ac_cv_path_ed_PROGRAM"
-+ed_PROGRAM=$ac_cv_path_ed_PROGRAM
-+
- if test -n "$ed_PROGRAM"; then
-- echo "$ac_t""$ed_PROGRAM" 1>&6
-+ echo "$as_me:$LINENO: result: $ed_PROGRAM" >&5
-+echo "${ECHO_T}$ed_PROGRAM" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-
-
--echo $ac_n "checking build system type""... $ac_c" 1>&6
--echo "configure:1032: checking build system type" >&5
-
--build_alias=$build
--case "$build_alias" in
--NONE)
-- case $nonopt in
-- NONE) build_alias=$host_alias ;;
-- *) build_alias=$nonopt ;;
-- esac ;;
--esac
-+cat >>confdefs.h <<\_ACEOF
-+#define _GNU_SOURCE 1
-+_ACEOF
-
--build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
--build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
--echo "$ac_t""$build" 1>&6
-
--if test $host != $build; then
-- ac_tool_prefix=${host_alias}-
--else
-- ac_tool_prefix=
--fi
-
-
-- # Check whether --enable-largefile or --disable-largefile was given.
--if test "${enable_largefile+set}" = set; then
-- enableval="$enable_largefile"
-- :
--fi
--
-- if test "$enable_largefile" != no; then
-- # Extract the first word of "${ac_tool_prefix}getconf", so it can be a program name with args.
--set dummy ${ac_tool_prefix}getconf; ac_word=$2
--echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
--echo "configure:1066: checking for $ac_word" >&5
--if eval "test \"`echo '$''{'ac_cv_prog_GETCONF'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- if test -n "$GETCONF"; then
-- ac_cv_prog_GETCONF="$GETCONF" # Let the user override the test.
-+echo "$as_me:$LINENO: checking for egrep" >&5
-+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-+if test "${ac_cv_prog_egrep+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-- ac_dummy="$PATH"
-- for ac_dir in $ac_dummy; do
-- test -z "$ac_dir" && ac_dir=.
-- if test -f $ac_dir/$ac_word; then
-- ac_cv_prog_GETCONF="${ac_tool_prefix}getconf"
-- break
-+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-+ then ac_cv_prog_egrep='grep -E'
-+ else ac_cv_prog_egrep='egrep'
- fi
-- done
-- IFS="$ac_save_ifs"
-- test -z "$ac_cv_prog_GETCONF" && ac_cv_prog_GETCONF="getconf"
- fi
--fi
--GETCONF="$ac_cv_prog_GETCONF"
--if test -n "$GETCONF"; then
-- echo "$ac_t""$GETCONF" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
-+ EGREP=$ac_cv_prog_egrep
-+
-+
-+
-+echo "$as_me:$LINENO: checking for AIX" >&5
-+echo $ECHO_N "checking for AIX... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#ifdef _AIX
-+ yes
-+#endif
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "yes" >/dev/null 2>&1; then
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+cat >>confdefs.h <<\_ACEOF
-+#define _ALL_SOURCE 1
-+_ACEOF
-+
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
- fi
-+rm -f conftest*
-
-
-+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-+if test "${ac_cv_header_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+#include <stdarg.h>
-+#include <string.h>
-+#include <float.h>
-
-- echo $ac_n "checking for CFLAGS value to request large file support""... $ac_c" 1>&6
--echo "configure:1096: checking for CFLAGS value to request large file support" >&5
--if eval "test \"`echo '$''{'ac_cv_sys_largefile_CFLAGS'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_header_stdc=yes
- else
-- ac_cv_sys_largefile_CFLAGS=`($GETCONF LFS_CFLAGS) 2>/dev/null` || {
-- ac_cv_sys_largefile_CFLAGS=no
-- case "$host_os" in
-- # IRIX 6.2 and later require cc -n32.
-- irix6.[2-9]* | irix6.1[0-9]* | irix[7-9].* | irix[1-9][0-9]*)
-- if test "$GCC" != yes; then
-- ac_cv_sys_largefile_CFLAGS=-n32
-- fi
-- ac_save_CC="$CC"
-- CC="$CC $ac_cv_sys_largefile_CFLAGS"
-- cat > conftest.$ac_ext <<EOF
--#line 1111 "configure"
--#include "confdefs.h"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--int main() {
-+ac_cv_header_stdc=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-
--; return 0; }
--EOF
--if { (eval echo configure:1118: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-+if test $ac_cv_header_stdc = yes; then
-+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <string.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "memchr" >/dev/null 2>&1; then
- :
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_sys_largefile_CFLAGS=no
-+ ac_cv_header_stdc=no
- fi
- rm -f conftest*
-- CC="$ac_save_CC"
-- esac
-- }
-+
- fi
-
--echo "$ac_t""$ac_cv_sys_largefile_CFLAGS" 1>&6
-- echo $ac_n "checking for LDFLAGS value to request large file support""... $ac_c" 1>&6
--echo "configure:1134: checking for LDFLAGS value to request large file support" >&5
--if eval "test \"`echo '$''{'ac_cv_sys_largefile_LDFLAGS'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+if test $ac_cv_header_stdc = yes; then
-+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdlib.h>
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "free" >/dev/null 2>&1; then
-+ :
- else
-- ac_cv_sys_largefile_LDFLAGS=`($GETCONF LFS_LDFLAGS) 2>/dev/null` || {
-- ac_cv_sys_largefile_LDFLAGS=no
--
-- }
-+ ac_cv_header_stdc=no
- fi
-+rm -f conftest*
-
--echo "$ac_t""$ac_cv_sys_largefile_LDFLAGS" 1>&6
-- echo $ac_n "checking for LIBS value to request large file support""... $ac_c" 1>&6
--echo "configure:1146: checking for LIBS value to request large file support" >&5
--if eval "test \"`echo '$''{'ac_cv_sys_largefile_LIBS'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- ac_cv_sys_largefile_LIBS=`($GETCONF LFS_LIBS) 2>/dev/null` || {
-- ac_cv_sys_largefile_LIBS=no
--
-- }
- fi
-
--echo "$ac_t""$ac_cv_sys_largefile_LIBS" 1>&6
-+if test $ac_cv_header_stdc = yes; then
-+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-+ if test "$cross_compiling" = yes; then
-+ :
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <ctype.h>
-+#if ((' ' & 0x0FF) == 0x020)
-+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-+#else
-+# define ISLOWER(c) \
-+ (('a' <= (c) && (c) <= 'i') \
-+ || ('j' <= (c) && (c) <= 'r') \
-+ || ('s' <= (c) && (c) <= 'z'))
-+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-+#endif
-
-- for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-- case "$ac_flag" in
-- no) ;;
-- -D_FILE_OFFSET_BITS=*) ;;
-- -D_LARGEFILE_SOURCE | -D_LARGEFILE_SOURCE=*) ;;
-- -D_LARGE_FILES | -D_LARGE_FILES=*) ;;
-- -D?* | -I?*)
-- case "$ac_flag" in
-- no) ;;
-- ?*)
-- case "$CPPFLAGS" in
-- '') CPPFLAGS="$ac_flag" ;;
-- *) CPPFLAGS=$CPPFLAGS' '"$ac_flag" ;;
-- esac ;;
-- esac ;;
-- *)
-- case "$ac_flag" in
-- no) ;;
-- ?*)
-- case "$CFLAGS" in
-- '') CFLAGS="$ac_flag" ;;
-- *) CFLAGS=$CFLAGS' '"$ac_flag" ;;
-- esac ;;
-- esac ;;
-- esac
-- done
-- case "$ac_cv_sys_largefile_LDFLAGS" in
-- no) ;;
-- ?*)
-- case "$LDFLAGS" in
-- '') LDFLAGS="$ac_cv_sys_largefile_LDFLAGS" ;;
-- *) LDFLAGS=$LDFLAGS' '"$ac_cv_sys_largefile_LDFLAGS" ;;
-- esac ;;
-- esac
-- case "$ac_cv_sys_largefile_LIBS" in
-- no) ;;
-- ?*)
-- case "$LIBS" in
-- '') LIBS="$ac_cv_sys_largefile_LIBS" ;;
-- *) LIBS=$LIBS' '"$ac_cv_sys_largefile_LIBS" ;;
-- esac ;;
-- esac
-- echo $ac_n "checking for _FILE_OFFSET_BITS""... $ac_c" 1>&6
--echo "configure:1201: checking for _FILE_OFFSET_BITS" >&5
--if eval "test \"`echo '$''{'ac_cv_sys_file_offset_bits'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-+int
-+main ()
-+{
-+ int i;
-+ for (i = 0; i < 256; i++)
-+ if (XOR (islower (i), ISLOWER (i))
-+ || toupper (i) != TOUPPER (i))
-+ exit(2);
-+ exit (0);
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
- else
-- ac_cv_sys_file_offset_bits=no
-- case "$host_os" in
-- # HP-UX 10.20 and later
-- hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-- ac_cv_sys_file_offset_bits=64 ;;
-- esac
-- for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-- case "$ac_flag" in
-- -D_FILE_OFFSET_BITS)
-- ac_cv_sys_file_offset_bits=1 ;;
-- -D_FILE_OFFSET_BITS=*)
-- ac_cv_sys_file_offset_bits=`expr " $ac_flag" : '[^=]*=\(.*\)'` ;;
-- esac
-- done
--
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_header_stdc=no
- fi
-+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+fi
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6
-+if test $ac_cv_header_stdc = yes; then
-
--echo "$ac_t""$ac_cv_sys_file_offset_bits" 1>&6
-- if test "$ac_cv_sys_file_offset_bits" != no; then
-- cat >> confdefs.h <<EOF
--#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
--EOF
-+cat >>confdefs.h <<\_ACEOF
-+#define STDC_HEADERS 1
-+_ACEOF
-
-- fi
-- echo $ac_n "checking for _LARGEFILE_SOURCE""... $ac_c" 1>&6
--echo "configure:1230: checking for _LARGEFILE_SOURCE" >&5
--if eval "test \"`echo '$''{'ac_cv_sys_largefile_source'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- ac_cv_sys_largefile_source=no
-- case "$host_os" in
-- # HP-UX 10.20 and later
-- hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-- ac_cv_sys_largefile_source=1 ;;
-- esac
-- for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-- case "$ac_flag" in
-- -D_LARGEFILE_SOURCE)
-- ac_cv_sys_largefile_source=1 ;;
-- -D_LARGEFILE_SOURCE=*)
-- ac_cv_sys_largefile_source=`expr " $ac_flag" : '[^=]*=\(.*\)'` ;;
-- esac
-- done
--
- fi
-
--echo "$ac_t""$ac_cv_sys_largefile_source" 1>&6
-- if test "$ac_cv_sys_largefile_source" != no; then
-- cat >> confdefs.h <<EOF
--#define _LARGEFILE_SOURCE $ac_cv_sys_largefile_source
--EOF
-+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-+
-
-- fi
-- echo $ac_n "checking for _LARGE_FILES""... $ac_c" 1>&6
--echo "configure:1259: checking for _LARGE_FILES" >&5
--if eval "test \"`echo '$''{'ac_cv_sys_large_files'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- ac_cv_sys_large_files=no
-- case "$host_os" in
-- # AIX 4.2 and later
-- aix4.[2-9]* | aix4.1[0-9]* | aix[5-9].* | aix[1-9][0-9]*)
-- ac_cv_sys_large_files=1 ;;
-- esac
-- for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-- case "$ac_flag" in
-- -D_LARGE_FILES)
-- ac_cv_sys_large_files=1 ;;
-- -D_LARGE_FILES=*)
-- ac_cv_sys_large_files=`expr " $ac_flag" : '[^=]*=\(.*\)'` ;;
-- esac
-- done
--
--fi
-
--echo "$ac_t""$ac_cv_sys_large_files" 1>&6
-- if test "$ac_cv_sys_large_files" != no; then
-- cat >> confdefs.h <<EOF
--#define _LARGE_FILES $ac_cv_sys_large_files
--EOF
-
-- fi
-- fi
--
-
--echo $ac_n "checking for AIX""... $ac_c" 1>&6
--echo "configure:1291: checking for AIX" >&5
--cat > conftest.$ac_ext <<EOF
--#line 1293 "configure"
--#include "confdefs.h"
--#ifdef _AIX
-- yes
--#endif
-
--EOF
--if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "yes" >/dev/null 2>&1; then
-- rm -rf conftest*
-- echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF
--#define _ALL_SOURCE 1
--EOF
-
-+
-+
-+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-+ inttypes.h stdint.h unistd.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- rm -rf conftest*
-- echo "$ac_t""no" 1>&6
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_Header=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_Header=no"
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-
-+fi
-
--ac_safe=`echo "minix/config.h" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6
--echo "configure:1316: checking for minix/config.h" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+done
-+
-+
-+if test "${ac_cv_header_minix_config_h+set}" = set; then
-+ echo "$as_me:$LINENO: checking for minix/config.h" >&5
-+echo $ECHO_N "checking for minix/config.h... $ECHO_C" >&6
-+if test "${ac_cv_header_minix_config_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
-+echo "${ECHO_T}$ac_cv_header_minix_config_h" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1321 "configure"
--#include "confdefs.h"
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking minix/config.h usability" >&5
-+echo $ECHO_N "checking minix/config.h usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
- #include <minix/config.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1326: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking minix/config.h presence" >&5
-+echo $ECHO_N "checking minix/config.h presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <minix/config.h>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: minix/config.h: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: minix/config.h: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: minix/config.h: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: minix/config.h: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: minix/config.h: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: minix/config.h: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for minix/config.h" >&5
-+echo $ECHO_N "checking for minix/config.h... $ECHO_C" >&6
-+if test "${ac_cv_header_minix_config_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_header_minix_config_h=$ac_header_preproc
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
-+echo "${ECHO_T}$ac_cv_header_minix_config_h" >&6
-+
-+fi
-+if test $ac_cv_header_minix_config_h = yes; then
- MINIX=yes
- else
-- echo "$ac_t""no" 1>&6
--MINIX=
-+ MINIX=
- fi
-
-+
- if test "$MINIX" = yes; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define _POSIX_SOURCE 1
--EOF
-+_ACEOF
-
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define _POSIX_1_SOURCE 2
--EOF
-+_ACEOF
-
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define _MINIX 1
--EOF
-+_ACEOF
-
- fi
-
--echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
--echo "configure:1364: checking for POSIXized ISC" >&5
--if test -d /etc/conf/kconfig.d &&
-- grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
--then
-- echo "$ac_t""yes" 1>&6
-- ISC=yes # If later tests want to check for ISC.
-- cat >> confdefs.h <<\EOF
--#define _POSIX_SOURCE 1
--EOF
-
-- if test "$GCC" = yes; then
-- CC="$CC -posix"
-- else
-- CC="$CC -Xp"
-- fi
-+echo "$as_me:$LINENO: checking for library containing strerror" >&5
-+echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6
-+if test "${ac_cv_search_strerror+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- echo "$ac_t""no" 1>&6
-- ISC=
--fi
-+ ac_func_search_save_LIBS=$LIBS
-+ac_cv_search_strerror=no
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
--echo "configure:1385: checking for Cygwin environment" >&5
--if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char strerror ();
-+int
-+main ()
-+{
-+strerror ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_search_strerror="none required"
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1390 "configure"
--#include "confdefs.h"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--int main() {
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+if test "$ac_cv_search_strerror" = no; then
-+ for ac_lib in cposix; do
-+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--#ifndef __CYGWIN__
--#define __CYGWIN__ __CYGWIN32__
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
- #endif
--return __CYGWIN__;
--; return 0; }
--EOF
--if { (eval echo configure:1401: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- ac_cv_cygwin=yes
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char strerror ();
-+int
-+main ()
-+{
-+strerror ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_search_strerror="-l$ac_lib"
-+break
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_cygwin=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+ done
- fi
-+LIBS=$ac_func_search_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5
-+echo "${ECHO_T}$ac_cv_search_strerror" >&6
-+if test "$ac_cv_search_strerror" != no; then
-+ test "$ac_cv_search_strerror" = "none required" || LIBS="$ac_cv_search_strerror $LIBS"
-
--echo "$ac_t""$ac_cv_cygwin" 1>&6
--CYGWIN=
--test "$ac_cv_cygwin" = yes && CYGWIN=yes
--echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
--echo "configure:1418: checking for mingw32 environment" >&5
--if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+
-+# Check whether --enable-largefile or --disable-largefile was given.
-+if test "${enable_largefile+set}" = set; then
-+ enableval="$enable_largefile"
-+
-+fi;
-+if test "$enable_largefile" != no; then
-+
-+ echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5
-+echo $ECHO_N "checking for special C compiler options needed for large files... $ECHO_C" >&6
-+if test "${ac_cv_sys_largefile_CC+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1423 "configure"
--#include "confdefs.h"
-+ ac_cv_sys_largefile_CC=no
-+ if test "$GCC" != yes; then
-+ ac_save_CC=$CC
-+ while :; do
-+ # IRIX 6.2 and later do not support large files by default,
-+ # so use the C compiler's -n32 option if that helps.
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <sys/types.h>
-+ /* Check that off_t can represent 2**63 - 1 correctly.
-+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
-+ since some C++ compilers masquerading as C compilers
-+ incorrectly reject 9223372036854775807. */
-+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-+ && LARGE_OFF_T % 2147483647 == 1)
-+ ? 1 : -1];
-+int
-+main ()
-+{
-
--int main() {
--return __MINGW32__;
--; return 0; }
--EOF
--if { (eval echo configure:1430: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- ac_cv_mingw32=yes
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+ rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ break
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_mingw32=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.$ac_objext
-+ CC="$CC -n32"
-+ rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_sys_largefile_CC=' -n32'; break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.$ac_objext
-+ break
-+ done
-+ CC=$ac_save_CC
-+ rm -f conftest.$ac_ext
-+ fi
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5
-+echo "${ECHO_T}$ac_cv_sys_largefile_CC" >&6
-+ if test "$ac_cv_sys_largefile_CC" != no; then
-+ CC=$CC$ac_cv_sys_largefile_CC
-+ fi
-+
-+ echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5
-+echo $ECHO_N "checking for _FILE_OFFSET_BITS value needed for large files... $ECHO_C" >&6
-+if test "${ac_cv_sys_file_offset_bits+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ while :; do
-+ ac_cv_sys_file_offset_bits=no
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <sys/types.h>
-+ /* Check that off_t can represent 2**63 - 1 correctly.
-+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
-+ since some C++ compilers masquerading as C compilers
-+ incorrectly reject 9223372036854775807. */
-+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-+ && LARGE_OFF_T % 2147483647 == 1)
-+ ? 1 : -1];
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#define _FILE_OFFSET_BITS 64
-+#include <sys/types.h>
-+ /* Check that off_t can represent 2**63 - 1 correctly.
-+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
-+ since some C++ compilers masquerading as C compilers
-+ incorrectly reject 9223372036854775807. */
-+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-+ && LARGE_OFF_T % 2147483647 == 1)
-+ ? 1 : -1];
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_sys_file_offset_bits=64; break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ break
-+done
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5
-+echo "${ECHO_T}$ac_cv_sys_file_offset_bits" >&6
-+if test "$ac_cv_sys_file_offset_bits" != no; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
-+_ACEOF
-+
- fi
- rm -f conftest*
-+ echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5
-+echo $ECHO_N "checking for _LARGE_FILES value needed for large files... $ECHO_C" >&6
-+if test "${ac_cv_sys_large_files+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ while :; do
-+ ac_cv_sys_large_files=no
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <sys/types.h>
-+ /* Check that off_t can represent 2**63 - 1 correctly.
-+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
-+ since some C++ compilers masquerading as C compilers
-+ incorrectly reject 9223372036854775807. */
-+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-+ && LARGE_OFF_T % 2147483647 == 1)
-+ ? 1 : -1];
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#define _LARGE_FILES 1
-+#include <sys/types.h>
-+ /* Check that off_t can represent 2**63 - 1 correctly.
-+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
-+ since some C++ compilers masquerading as C compilers
-+ incorrectly reject 9223372036854775807. */
-+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
-+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
-+ && LARGE_OFF_T % 2147483647 == 1)
-+ ? 1 : -1];
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_sys_large_files=1; break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ break
-+done
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5
-+echo "${ECHO_T}$ac_cv_sys_large_files" >&6
-+if test "$ac_cv_sys_large_files" != no; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define _LARGE_FILES $ac_cv_sys_large_files
-+_ACEOF
-+
-+fi
- rm -f conftest*
- fi
-
--echo "$ac_t""$ac_cv_mingw32" 1>&6
--MINGW32=
--test "$ac_cv_mingw32" = yes && MINGW32=yes
-
-
--echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
--echo "configure:1449: checking for executable suffix" >&5
--if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for function prototypes" >&5
-+echo $ECHO_N "checking for function prototypes... $ECHO_C" >&6
-+if test "$ac_cv_prog_cc_stdc" != no; then
-+ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define PROTOTYPES 1
-+_ACEOF
-+
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define __PROTOTYPES 1
-+_ACEOF
-+
- else
-- if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-- ac_cv_exeext=.exe
-+ echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6
-+fi
-+
-+echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
-+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
-+if test "${ac_cv_c_const+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- rm -f conftest*
-- echo 'int main () { return 0; }' > conftest.$ac_ext
-- ac_cv_exeext=
-- if { (eval echo configure:1459: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-- for file in conftest.*; do
-- case $file in
-- *.c | *.o | *.obj) ;;
-- *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-- esac
-- done
-- else
-- { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-- fi
-- rm -f conftest*
-- test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+/* FIXME: Include the comments suggested by Paul. */
-+#ifndef __cplusplus
-+ /* Ultrix mips cc rejects this. */
-+ typedef int charset[2];
-+ const charset x;
-+ /* SunOS 4.1.1 cc rejects this. */
-+ char const *const *ccp;
-+ char **p;
-+ /* NEC SVR4.0.2 mips cc rejects this. */
-+ struct point {int x, y;};
-+ static struct point const zero = {0,0};
-+ /* AIX XL C 1.02.0.0 rejects this.
-+ It does not let you subtract one const X* pointer from another in
-+ an arm of an if-expression whose if-part is not a constant
-+ expression */
-+ const char *g = "string";
-+ ccp = &g + (g ? g-g : 0);
-+ /* HPUX 7.0 cc rejects these. */
-+ ++ccp;
-+ p = (char**) ccp;
-+ ccp = (char const *const *) p;
-+ { /* SCO 3.2v4 cc rejects this. */
-+ char *t;
-+ char const *s = 0 ? (char *) 0 : (char const *) 0;
-+
-+ *t++ = 0;
-+ }
-+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
-+ int x[] = {25, 17};
-+ const int *foo = &x[0];
-+ ++foo;
-+ }
-+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-+ typedef const int *iptr;
-+ iptr p = 0;
-+ ++p;
-+ }
-+ { /* AIX XL C 1.02.0.0 rejects this saying
-+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-+ struct s { int j; const int *ap[3]; };
-+ struct s *b; b->j = 5;
-+ }
-+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-+ const int foo = 10;
-+ }
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_c_const=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_c_const=no
- fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
-+echo "${ECHO_T}$ac_cv_c_const" >&6
-+if test $ac_cv_c_const = no; then
-
--EXEEXT=""
--test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
--echo "$ac_t""${ac_cv_exeext}" 1>&6
--ac_exeext=$EXEEXT
-+cat >>confdefs.h <<\_ACEOF
-+#define const
-+_ACEOF
-
-+fi
-
-
-
-
--echo $ac_n "checking for ${CC-cc} option to accept ANSI C""... $ac_c" 1>&6
--echo "configure:1484: checking for ${CC-cc} option to accept ANSI C" >&5
--if eval "test \"`echo '$''{'am_cv_prog_cc_stdc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+
-+
-+ac_header_dirent=no
-+for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
-+ as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5
-+echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- am_cv_prog_cc_stdc=no
--ac_save_CC="$CC"
--# Don't try gcc -ansi; that turns off useful extensions and
--# breaks some systems' header files.
--# AIX -qlanglvl=ansi
--# Ultrix and OSF/1 -std1
--# HP-UX -Aa -D_HPUX_SOURCE
--# SVR4 -Xc -D__EXTENSIONS__
--for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
--do
-- CC="$ac_save_CC $ac_arg"
-- cat > conftest.$ac_ext <<EOF
--#line 1500 "configure"
--#include "confdefs.h"
--#include <stdarg.h>
--#include <stdio.h>
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <sys/types.h>
--#include <sys/stat.h>
--/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
--struct buf { int x; };
--FILE * (*rcsopen) (struct buf *, struct stat *, int);
--static char *e (p, i)
-- char **p;
-- int i;
-+#include <$ac_hdr>
-+
-+int
-+main ()
- {
-- return p[i];
-+if ((DIR *) 0)
-+return 0;
-+ ;
-+ return 0;
- }
--static char *f (char * (*g) (char **, int), char **p, ...)
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_Header=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_Header=no"
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
-+_ACEOF
-+
-+ac_header_dirent=$ac_hdr; break
-+fi
-+
-+done
-+# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
-+if test $ac_header_dirent = dirent.h; then
-+ echo "$as_me:$LINENO: checking for library containing opendir" >&5
-+echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6
-+if test "${ac_cv_search_opendir+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_func_search_save_LIBS=$LIBS
-+ac_cv_search_opendir=no
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char opendir ();
-+int
-+main ()
- {
-- char *s;
-- va_list v;
-- va_start (v,p);
-- s = g (p, va_arg (v,int));
-- va_end (v);
-- return s;
-+opendir ();
-+ ;
-+ return 0;
- }
--int test (int i, double x);
--struct s1 {int (*f) (int a);};
--struct s2 {int (*f) (double a);};
--int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
--int argc;
--char **argv;
--
--int main() {
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_search_opendir="none required"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+if test "$ac_cv_search_opendir" = no; then
-+ for ac_lib in dir; do
-+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
--; return 0; }
--EOF
--if { (eval echo configure:1537: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- am_cv_prog_cc_stdc="$ac_arg"; break
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char opendir ();
-+int
-+main ()
-+{
-+opendir ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_search_opendir="-l$ac_lib"
-+break
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--rm -f conftest*
--done
--CC="$ac_save_CC"
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+ done
-+fi
-+LIBS=$ac_func_search_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-+echo "${ECHO_T}$ac_cv_search_opendir" >&6
-+if test "$ac_cv_search_opendir" != no; then
-+ test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS"
-
- fi
-
--if test -z "$am_cv_prog_cc_stdc"; then
-- echo "$ac_t""none needed" 1>&6
- else
-- echo "$ac_t""$am_cv_prog_cc_stdc" 1>&6
-+ echo "$as_me:$LINENO: checking for library containing opendir" >&5
-+echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6
-+if test "${ac_cv_search_opendir+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_func_search_save_LIBS=$LIBS
-+ac_cv_search_opendir=no
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char opendir ();
-+int
-+main ()
-+{
-+opendir ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_search_opendir="none required"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
--case "x$am_cv_prog_cc_stdc" in
-- x|xno) ;;
-- *) CC="$CC $am_cv_prog_cc_stdc" ;;
--esac
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+if test "$ac_cv_search_opendir" = no; then
-+ for ac_lib in x; do
-+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char opendir ();
-+int
-+main ()
-+{
-+opendir ();
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_search_opendir="-l$ac_lib"
-+break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+ done
-+fi
-+LIBS=$ac_func_search_save_LIBS
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-+echo "${ECHO_T}$ac_cv_search_opendir" >&6
-+if test "$ac_cv_search_opendir" != no; then
-+ test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS"
-
--echo $ac_n "checking for function prototypes""... $ac_c" 1>&6
--echo "configure:1563: checking for function prototypes" >&5
--if test "$am_cv_prog_cc_stdc" != no; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
--#define PROTOTYPES 1
--EOF
-+fi
-
-- U= ANSI2KNR=
--else
-- echo "$ac_t""no" 1>&6
-- U=_ ANSI2KNR=./ansi2knr
-- # Ensure some checks needed by ansi2knr itself.
-- echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
--echo "configure:1576: checking for ANSI C header files" >&5
--if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+
-+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-+if test "${ac_cv_header_stdc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1581 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <stdlib.h>
- #include <stdarg.h>
- #include <string.h>
- #include <float.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1589: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_header_stdc=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_header_stdc=no
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
-
- if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
--cat > conftest.$ac_ext <<EOF
--#line 1606 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <string.h>
--EOF
-+
-+_ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "memchr" >/dev/null 2>&1; then
-+ $EGREP "memchr" >/dev/null 2>&1; then
- :
- else
-- rm -rf conftest*
- ac_cv_header_stdc=no
- fi
- rm -f conftest*
-@@ -1619,16 +3887,20 @@
-
- if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
--cat > conftest.$ac_ext <<EOF
--#line 1624 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <stdlib.h>
--EOF
-+
-+_ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "free" >/dev/null 2>&1; then
-+ $EGREP "free" >/dev/null 2>&1; then
- :
- else
-- rm -rf conftest*
- ac_cv_header_stdc=no
- fi
- rm -f conftest*
-@@ -1637,1179 +3909,6855 @@
-
- if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
--if test "$cross_compiling" = yes; then
-+ if test "$cross_compiling" = yes; then
- :
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1645 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <ctype.h>
--#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
--#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
--#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
--int main () { int i; for (i = 0; i < 256; i++)
--if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
--exit (0); }
-+#if ((' ' & 0x0FF) == 0x020)
-+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-+#else
-+# define ISLOWER(c) \
-+ (('a' <= (c) && (c) <= 'i') \
-+ || ('j' <= (c) && (c) <= 'r') \
-+ || ('s' <= (c) && (c) <= 'z'))
-+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-+#endif
-
--EOF
--if { (eval echo configure:1656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-+int
-+main ()
-+{
-+ int i;
-+ for (i = 0; i < 256; i++)
-+ if (XOR (islower (i), ISLOWER (i))
-+ || toupper (i) != TOUPPER (i))
-+ exit(2);
-+ exit (0);
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- :
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- ac_cv_header_stdc=no
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_header_stdc=no
- fi
--rm -fr conftest*
-+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
- fi
- fi
--
--echo "$ac_t""$ac_cv_header_stdc" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6
- if test $ac_cv_header_stdc = yes; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define STDC_HEADERS 1
--EOF
-+_ACEOF
-
- fi
-
-- for ac_hdr in string.h
-+
-+
-+
-+
-+
-+
-+for ac_header in fcntl.h limits.h string.h unistd.h utime.h varargs.h
- do
--ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:1683: checking for $ac_hdr" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1688 "configure"
--#include "confdefs.h"
--#include <$ac_hdr>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1693: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_hdr 1
--EOF
--
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
- fi
-+
- done
-
-+
-+echo "$as_me:$LINENO: checking for mode_t" >&5
-+echo $ECHO_N "checking for mode_t... $ECHO_C" >&6
-+if test "${ac_cv_type_mode_t+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+if ((mode_t *) 0)
-+ return 0;
-+if (sizeof (mode_t))
-+ return 0;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_type_mode_t=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_type_mode_t=no
- fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_type_mode_t" >&5
-+echo "${ECHO_T}$ac_cv_type_mode_t" >&6
-+if test $ac_cv_type_mode_t = yes; then
-+ :
-+else
-
--echo $ac_n "checking for working const""... $ac_c" 1>&6
--echo "configure:1722: checking for working const" >&5
--if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+cat >>confdefs.h <<_ACEOF
-+#define mode_t int
-+_ACEOF
-+
-+fi
-+
-+echo "$as_me:$LINENO: checking for off_t" >&5
-+echo $ECHO_N "checking for off_t... $ECHO_C" >&6
-+if test "${ac_cv_type_off_t+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1727 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+if ((off_t *) 0)
-+ return 0;
-+if (sizeof (off_t))
-+ return 0;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_type_off_t=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--int main() {
-+ac_cv_type_off_t=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5
-+echo "${ECHO_T}$ac_cv_type_off_t" >&6
-+if test $ac_cv_type_off_t = yes; then
-+ :
-+else
-
--/* Ultrix mips cc rejects this. */
--typedef int charset[2]; const charset x;
--/* SunOS 4.1.1 cc rejects this. */
--char const *const *ccp;
--char **p;
--/* NEC SVR4.0.2 mips cc rejects this. */
--struct point {int x, y;};
--static struct point const zero = {0,0};
--/* AIX XL C 1.02.0.0 rejects this.
-- It does not let you subtract one const X* pointer from another in an arm
-- of an if-expression whose if-part is not a constant expression */
--const char *g = "string";
--ccp = &g + (g ? g-g : 0);
--/* HPUX 7.0 cc rejects these. */
--++ccp;
--p = (char**) ccp;
--ccp = (char const *const *) p;
--{ /* SCO 3.2v4 cc rejects this. */
-- char *t;
-- char const *s = 0 ? (char *) 0 : (char const *) 0;
-+cat >>confdefs.h <<_ACEOF
-+#define off_t long
-+_ACEOF
-
-- *t++ = 0;
-+fi
-+
-+echo "$as_me:$LINENO: checking for pid_t" >&5
-+echo $ECHO_N "checking for pid_t... $ECHO_C" >&6
-+if test "${ac_cv_type_pid_t+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+if ((pid_t *) 0)
-+ return 0;
-+if (sizeof (pid_t))
-+ return 0;
-+ ;
-+ return 0;
- }
--{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
-- int x[] = {25, 17};
-- const int *foo = &x[0];
-- ++foo;
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_type_pid_t=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_type_pid_t=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5
-+echo "${ECHO_T}$ac_cv_type_pid_t" >&6
-+if test $ac_cv_type_pid_t = yes; then
-+ :
-+else
-+
-+cat >>confdefs.h <<_ACEOF
-+#define pid_t int
-+_ACEOF
-+
-+fi
-+
-+echo "$as_me:$LINENO: checking return type of signal handlers" >&5
-+echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6
-+if test "${ac_cv_type_signal+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <sys/types.h>
-+#include <signal.h>
-+#ifdef signal
-+# undef signal
-+#endif
-+#ifdef __cplusplus
-+extern "C" void (*signal (int, void (*)(int)))(int);
-+#else
-+void (*signal ()) ();
-+#endif
-+
-+int
-+main ()
-+{
-+int i;
-+ ;
-+ return 0;
- }
--{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-- typedef const int *iptr;
-- iptr p = 0;
-- ++p;
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_type_signal=void
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_type_signal=int
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5
-+echo "${ECHO_T}$ac_cv_type_signal" >&6
-+
-+cat >>confdefs.h <<_ACEOF
-+#define RETSIGTYPE $ac_cv_type_signal
-+_ACEOF
-+
-+
-+echo "$as_me:$LINENO: checking for size_t" >&5
-+echo $ECHO_N "checking for size_t... $ECHO_C" >&6
-+if test "${ac_cv_type_size_t+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+if ((size_t *) 0)
-+ return 0;
-+if (sizeof (size_t))
-+ return 0;
-+ ;
-+ return 0;
- }
--{ /* AIX XL C 1.02.0.0 rejects this saying
-- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-- struct s { int j; const int *ap[3]; };
-- struct s *b; b->j = 5;
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_type_size_t=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_type_size_t=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
-+echo "${ECHO_T}$ac_cv_type_size_t" >&6
-+if test $ac_cv_type_size_t = yes; then
-+ :
-+else
-+
-+cat >>confdefs.h <<_ACEOF
-+#define size_t unsigned
-+_ACEOF
-+
-+fi
-+
-+echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5
-+echo $ECHO_N "checking for stdbool.h that conforms to C99... $ECHO_C" >&6
-+if test "${ac_cv_header_stdbool_h+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+ #include <stdbool.h>
-+ #ifndef bool
-+ "error: bool is not defined"
-+ #endif
-+ #ifndef false
-+ "error: false is not defined"
-+ #endif
-+ #if false
-+ "error: false is not 0"
-+ #endif
-+ #ifndef true
-+ "error: false is not defined"
-+ #endif
-+ #if true != 1
-+ "error: true is not 1"
-+ #endif
-+ #ifndef __bool_true_false_are_defined
-+ "error: __bool_true_false_are_defined is not defined"
-+ #endif
-+
-+ struct s { _Bool s: 1; _Bool t; } s;
-+
-+ char a[true == 1 ? 1 : -1];
-+ char b[false == 0 ? 1 : -1];
-+ char c[__bool_true_false_are_defined == 1 ? 1 : -1];
-+ char d[(bool) -0.5 == true ? 1 : -1];
-+ bool e = &s;
-+ char f[(_Bool) -0.0 == false ? 1 : -1];
-+ char g[true];
-+ char h[sizeof (_Bool)];
-+ char i[sizeof s.t];
-+
-+int
-+main ()
-+{
-+ return !a + !b + !c + !d + !e + !f + !g + !h + !i;
-+ ;
-+ return 0;
- }
--{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-- const int foo = 10;
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_header_stdbool_h=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_header_stdbool_h=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5
-+echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6
-+ echo "$as_me:$LINENO: checking for _Bool" >&5
-+echo $ECHO_N "checking for _Bool... $ECHO_C" >&6
-+if test "${ac_cv_type__Bool+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+if ((_Bool *) 0)
-+ return 0;
-+if (sizeof (_Bool))
-+ return 0;
-+ ;
-+ return 0;
- }
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_type__Bool=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--; return 0; }
--EOF
--if { (eval echo configure:1776: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- ac_cv_c_const=yes
-+ac_cv_type__Bool=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5
-+echo "${ECHO_T}$ac_cv_type__Bool" >&6
-+if test $ac_cv_type__Bool = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE__BOOL 1
-+_ACEOF
-+
-+
-+fi
-+
-+ if test $ac_cv_header_stdbool_h = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_STDBOOL_H 1
-+_ACEOF
-+
-+ fi
-+
-+
-+
-+ # Define two additional variables used in the Makefile substitution.
-+
-+ if test "$ac_cv_header_stdbool_h" = yes; then
-+ STDBOOL_H=''
-+ else
-+ STDBOOL_H='stdbool.h'
-+ fi
-+
-+
-+ if test "$ac_cv_type__Bool" = yes; then
-+ HAVE__BOOL=1
-+ else
-+ HAVE__BOOL=0
-+ fi
-+
-+
-+
-+
-+for ac_header in sys/time.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_c_const=no
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
- fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--echo "$ac_t""$ac_cv_c_const" 1>&6
--if test $ac_cv_c_const = no; then
-- cat >> confdefs.h <<\EOF
--#define const
--EOF
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-
- fi
-
-+done
-
--ac_header_dirent=no
--for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
-+
-+
-+
-+for ac_header in utime.h
- do
--ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
--echo "configure:1802: checking for $ac_hdr that defines DIR" >&5
--if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1807 "configure"
--#include "confdefs.h"
--#include <sys/types.h>
--#include <$ac_hdr>
--int main() {
--DIR *dirp = 0;
--; return 0; }
--EOF
--if { (eval echo configure:1815: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- eval "ac_cv_header_dirent_$ac_safe=yes"
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_dirent_$ac_safe=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
- fi
--if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_hdr 1
--EOF
-- ac_header_dirent=$ac_hdr; break
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
- fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
- done
--# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
--if test $ac_header_dirent = dirent.h; then
--echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
--echo "configure:1840: checking for opendir in -ldir" >&5
--ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+
-+echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
-+echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6
-+if test "${ac_cv_header_time+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_save_LIBS="$LIBS"
--LIBS="-ldir $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 1848 "configure"
--#include "confdefs.h"
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char opendir();
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <sys/types.h>
-+#include <sys/time.h>
-+#include <time.h>
-
--int main() {
--opendir()
--; return 0; }
--EOF
--if { (eval echo configure:1859: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
-+int
-+main ()
-+{
-+if ((struct tm *) 0)
-+return 0;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_header_time=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_header_time=no
- fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
-+echo "${ECHO_T}$ac_cv_header_time" >&6
-+if test $ac_cv_header_time = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define TIME_WITH_SYS_TIME 1
-+_ACEOF
-
- fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- LIBS="$LIBS -ldir"
-+
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking for struct utimbuf" >&5
-+echo $ECHO_N "checking for struct utimbuf... $ECHO_C" >&6
-+if test "${fu_cv_sys_struct_utimbuf+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+#ifdef TIME_WITH_SYS_TIME
-+# include <sys/time.h>
-+# include <time.h>
-+#else
-+# ifdef HAVE_SYS_TIME_H
-+# include <sys/time.h>
-+# else
-+# include <time.h>
-+# endif
-+#endif
-+#ifdef HAVE_UTIME_H
-+# include <utime.h>
-+#endif
-+
-+int
-+main ()
-+{
-+static struct utimbuf x; x.actime = x.modtime;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ fu_cv_sys_struct_utimbuf=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fu_cv_sys_struct_utimbuf=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+
- fi
-+echo "$as_me:$LINENO: result: $fu_cv_sys_struct_utimbuf" >&5
-+echo "${ECHO_T}$fu_cv_sys_struct_utimbuf" >&6
-
-+ if test $fu_cv_sys_struct_utimbuf = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_STRUCT_UTIMBUF 1
-+_ACEOF
-+
-+ fi
-+
-+
-+echo "$as_me:$LINENO: checking whether closedir returns void" >&5
-+echo $ECHO_N "checking whether closedir returns void... $ECHO_C" >&6
-+if test "${ac_cv_func_closedir_void+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
--echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
--echo "configure:1881: checking for opendir in -lx" >&5
--ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
--if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ if test "$cross_compiling" = yes; then
-+ ac_cv_func_closedir_void=yes
- else
-- ac_save_LIBS="$LIBS"
--LIBS="-lx $LIBS"
--cat > conftest.$ac_ext <<EOF
--#line 1889 "configure"
--#include "confdefs.h"
--/* Override any gcc2 internal prototype to avoid an error. */
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char opendir();
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header_dirent>
-+#ifndef __cplusplus
-+int closedir ();
-+#endif
-
--int main() {
--opendir()
--; return 0; }
--EOF
--if { (eval echo configure:1900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=yes"
-+int
-+main ()
-+{
-+exit (closedir (opendir (".")) != 0);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_closedir_void=no
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_lib_$ac_lib_var=no"
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_func_closedir_void=yes
- fi
--rm -f conftest*
--LIBS="$ac_save_LIBS"
-+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_closedir_void" >&5
-+echo "${ECHO_T}$ac_cv_func_closedir_void" >&6
-+if test $ac_cv_func_closedir_void = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define CLOSEDIR_VOID 1
-+_ACEOF
-
- fi
--if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- LIBS="$LIBS -lx"
-+
-+
-+
-+for ac_header in limits.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
- fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ ac_header_preproc=no
- fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-
--echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
--echo "configure:1923: checking for ANSI C header files" >&5
--if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1928 "configure"
--#include "confdefs.h"
--#include <stdlib.h>
--#include <stdarg.h>
--#include <string.h>
--#include <float.h>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:1936: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- ac_cv_header_stdc=yes
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+
-+for ac_header in stdlib.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_header_stdc=no
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-
--if test $ac_cv_header_stdc = yes; then
-- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
--cat > conftest.$ac_ext <<EOF
--#line 1953 "configure"
--#include "confdefs.h"
--#include <string.h>
--EOF
--if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "memchr" >/dev/null 2>&1; then
-- :
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- rm -rf conftest*
-- ac_cv_header_stdc=no
-+ ac_cpp_err=yes
- fi
--rm -f conftest*
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ ac_header_preproc=no
- fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-
--if test $ac_cv_header_stdc = yes; then
-- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
--cat > conftest.$ac_ext <<EOF
--#line 1971 "configure"
--#include "confdefs.h"
--#include <stdlib.h>
--EOF
--if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "free" >/dev/null 2>&1; then
-- :
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- rm -rf conftest*
-- ac_cv_header_stdc=no
-+ eval "$as_ac_Header=$ac_header_preproc"
- fi
--rm -f conftest*
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
- fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-
--if test $ac_cv_header_stdc = yes; then
-- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
--if test "$cross_compiling" = yes; then
-- :
-+fi
-+
-+done
-+
-+
-+
-+
-+for ac_header in string.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 1992 "configure"
--#include "confdefs.h"
--#include <ctype.h>
--#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
--#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
--#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
--int main () { int i; for (i = 0; i < 256; i++)
--if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
--exit (0); }
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--EOF
--if { (eval echo configure:2003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-- :
-+ac_header_compiler=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- ac_cv_header_stdc=no
-+ ac_cpp_err=yes
- fi
--rm -fr conftest*
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
- fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
- fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
- fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-
--echo "$ac_t""$ac_cv_header_stdc" 1>&6
--if test $ac_cv_header_stdc = yes; then
-- cat >> confdefs.h <<\EOF
--#define STDC_HEADERS 1
--EOF
-
-+ echo "$as_me:$LINENO: checking whether getenv is declared" >&5
-+echo $ECHO_N "checking whether getenv is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_getenv+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef getenv
-+ char *p = (char *) getenv;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_getenv=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_getenv=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_getenv" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_getenv" >&6
-+if test $ac_cv_have_decl_getenv = yes; then
-
--for ac_hdr in fcntl.h limits.h string.h unistd.h utime.h varargs.h
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_GETENV 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_GETENV 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether malloc is declared" >&5
-+echo $ECHO_N "checking whether malloc is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_malloc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef malloc
-+ char *p = (char *) malloc;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_malloc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_malloc=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_malloc" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_malloc" >&6
-+if test $ac_cv_have_decl_malloc = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_MALLOC 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_MALLOC 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether system is Windows or MSDOS" >&5
-+echo $ECHO_N "checking whether system is Windows or MSDOS... $ECHO_C" >&6
-+if test "${ac_cv_win_or_dos+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+#if !defined _WIN32 && !defined __WIN32__ && !defined __MSDOS__
-+neither MSDOS nor Windows
-+#endif
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_win_or_dos=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_win_or_dos=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_win_or_dos" >&5
-+echo "${ECHO_T}$ac_cv_win_or_dos" >&6
-+
-+ if test x"$ac_cv_win_or_dos" = xyes; then
-+ ac_fs_accepts_drive_letter_prefix=1
-+ ac_fs_backslash_is_file_name_separator=1
-+ else
-+ ac_fs_accepts_drive_letter_prefix=0
-+ ac_fs_backslash_is_file_name_separator=0
-+ fi
-+
-+
-+
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define FILESYSTEM_ACCEPTS_DRIVE_LETTER_PREFIX $ac_fs_accepts_drive_letter_prefix
-+_ACEOF
-+
-+
-+
-+
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define FILESYSTEM_BACKSLASH_IS_FILE_NAME_SEPARATOR $ac_fs_backslash_is_file_name_separator
-+_ACEOF
-+
-+
-+
-+
-+for ac_header in unistd.h
- do
--ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:2030: checking for $ac_hdr" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2035 "configure"
--#include "confdefs.h"
--#include <$ac_hdr>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:2040: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_hdr 1
--EOF
--
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
- else
-- echo "$ac_t""no" 1>&6
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
- fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
- done
-
-
-- echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
--echo "configure:2068: checking for inttypes.h" >&5
--if eval "test \"`echo '$''{'jm_ac_cv_header_inttypes_h'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking for d_ino member in directory struct" >&5
-+echo $ECHO_N "checking for d_ino member in directory struct... $ECHO_C" >&6
-+if test "${jm_cv_struct_dirent_d_ino+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2073 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
- #include <sys/types.h>
--#include <inttypes.h>
--int main() {
--uintmax_t i = (uintmax_t) -1;
--; return 0; }
--EOF
--if { (eval echo configure:2081: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- jm_ac_cv_header_inttypes_h=yes
-+#ifdef HAVE_DIRENT_H
-+# include <dirent.h>
-+#else /* not HAVE_DIRENT_H */
-+# define dirent direct
-+# ifdef HAVE_SYS_NDIR_H
-+# include <sys/ndir.h>
-+# endif /* HAVE_SYS_NDIR_H */
-+# ifdef HAVE_SYS_DIR_H
-+# include <sys/dir.h>
-+# endif /* HAVE_SYS_DIR_H */
-+# ifdef HAVE_NDIR_H
-+# include <ndir.h>
-+# endif /* HAVE_NDIR_H */
-+#endif /* HAVE_DIRENT_H */
-+
-+int
-+main ()
-+{
-+struct dirent dp; dp.d_ino = 0;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ jm_cv_struct_dirent_d_ino=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- jm_ac_cv_header_inttypes_h=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+jm_cv_struct_dirent_d_ino=no
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+
-+
- fi
-+echo "$as_me:$LINENO: result: $jm_cv_struct_dirent_d_ino" >&5
-+echo "${ECHO_T}$jm_cv_struct_dirent_d_ino" >&6
-+ if test $jm_cv_struct_dirent_d_ino = yes; then
-
--echo "$ac_t""$jm_ac_cv_header_inttypes_h" 1>&6
-- if test $jm_ac_cv_header_inttypes_h = yes; then
-- cat >> confdefs.h <<EOF
--#define HAVE_INTTYPES_H 1
--EOF
-+cat >>confdefs.h <<\_ACEOF
-+#define D_INO_IN_DIRENT 1
-+_ACEOF
-
-+ fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking for long file names" >&5
-+echo $ECHO_N "checking for long file names... $ECHO_C" >&6
-+if test "${ac_cv_sys_long_file_names+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_cv_sys_long_file_names=yes
-+# Test for long file names in all the places we know might matter:
-+# . the current directory, where building will happen
-+# $prefix/lib where we will be installing things
-+# $exec_prefix/lib likewise
-+# eval it to expand exec_prefix.
-+# $TMPDIR if set, where it might want to write temporary files
-+# if $TMPDIR is not set:
-+# /tmp where it might want to write temporary files
-+# /var/tmp likewise
-+# /usr/tmp likewise
-+if test -n "$TMPDIR" && test -d "$TMPDIR" && test -w "$TMPDIR"; then
-+ ac_tmpdirs=$TMPDIR
-+else
-+ ac_tmpdirs='/tmp /var/tmp /usr/tmp'
-+fi
-+for ac_dir in . $ac_tmpdirs `eval echo $prefix/lib $exec_prefix/lib` ; do
-+ test -d $ac_dir || continue
-+ test -w $ac_dir || continue # It is less confusing to not echo anything here.
-+ ac_xdir=$ac_dir/cf$$
-+ (umask 077 && mkdir $ac_xdir 2>/dev/null) || continue
-+ ac_tf1=$ac_xdir/conftest9012345
-+ ac_tf2=$ac_xdir/conftest9012346
-+ (echo 1 >$ac_tf1) 2>/dev/null
-+ (echo 2 >$ac_tf2) 2>/dev/null
-+ ac_val=`cat $ac_tf1 2>/dev/null`
-+ if test ! -f $ac_tf1 || test "$ac_val" != 1; then
-+ ac_cv_sys_long_file_names=no
-+ rm -rf $ac_xdir 2>/dev/null
-+ break
- fi
-+ rm -rf $ac_xdir 2>/dev/null
-+done
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_sys_long_file_names" >&5
-+echo "${ECHO_T}$ac_cv_sys_long_file_names" >&6
-+if test $ac_cv_sys_long_file_names = yes; then
-
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_LONG_FILE_NAMES 1
-+_ACEOF
-
--echo $ac_n "checking for mode_t""... $ac_c" 1>&6
--echo "configure:2103: checking for mode_t" >&5
--if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_func in pathconf
-+do
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2108 "configure"
--#include "confdefs.h"
--#include <sys/types.h>
--#if STDC_HEADERS
--#include <stdlib.h>
--#include <stddef.h>
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
- #endif
--EOF
--if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "(^|[^a-zA-Z_0-9])mode_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-- rm -rf conftest*
-- ac_cv_type_mode_t=yes
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
- else
-- rm -rf conftest*
-- ac_cv_type_mode_t=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
- fi
--echo "$ac_t""$ac_cv_type_mode_t" 1>&6
--if test $ac_cv_type_mode_t = no; then
-- cat >> confdefs.h <<\EOF
--#define mode_t int
--EOF
-+done
-+
-+
-+
-+
-+
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-
-+for ac_func in vprintf
-+do
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
- fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
--echo $ac_n "checking for off_t""... $ac_c" 1>&6
--echo "configure:2136: checking for off_t" >&5
--if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+echo "$as_me:$LINENO: checking for _doprnt" >&5
-+echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6
-+if test "${ac_cv_func__doprnt+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2141 "configure"
--#include "confdefs.h"
--#include <sys/types.h>
--#if STDC_HEADERS
--#include <stdlib.h>
--#include <stddef.h>
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char _doprnt (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
- #endif
--EOF
--if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-- rm -rf conftest*
-- ac_cv_type_off_t=yes
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char _doprnt ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub__doprnt) || defined (__stub____doprnt)
-+choke me
-+#else
-+char (*f) () = _doprnt;
-+#endif
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+int
-+main ()
-+{
-+return f != _doprnt;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func__doprnt=yes
- else
-- rm -rf conftest*
-- ac_cv_type_off_t=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func__doprnt=no
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5
-+echo "${ECHO_T}$ac_cv_func__doprnt" >&6
-+if test $ac_cv_func__doprnt = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_DOPRNT 1
-+_ACEOF
-
- fi
--echo "$ac_t""$ac_cv_type_off_t" 1>&6
--if test $ac_cv_type_off_t = no; then
-- cat >> confdefs.h <<\EOF
--#define off_t long
--EOF
-
- fi
-+done
-
--echo $ac_n "checking for pid_t""... $ac_c" 1>&6
--echo "configure:2169: checking for pid_t" >&5
--if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+
-+ echo "$as_me:$LINENO: checking for error_at_line" >&5
-+echo $ECHO_N "checking for error_at_line... $ECHO_C" >&6
-+if test "${ac_cv_lib_error_at_line+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2174 "configure"
--#include "confdefs.h"
--#include <sys/types.h>
--#if STDC_HEADERS
--#include <stdlib.h>
--#include <stddef.h>
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+error_at_line (0, 0, "", 0, "");
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_lib_error_at_line=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_lib_error_at_line=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_lib_error_at_line" >&5
-+echo "${ECHO_T}$ac_cv_lib_error_at_line" >&6
-+if test $ac_cv_lib_error_at_line = no; then
-+ LIBOBJS="$LIBOBJS error.$ac_objext"
-+fi
-+
-+
-+
-+
-+
-+for ac_func in strerror
-+do
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
- #endif
--EOF
--if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-- rm -rf conftest*
-- ac_cv_type_pid_t=yes
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
- else
-- rm -rf conftest*
-- ac_cv_type_pid_t=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
- fi
--echo "$ac_t""$ac_cv_type_pid_t" 1>&6
--if test $ac_cv_type_pid_t = no; then
-- cat >> confdefs.h <<\EOF
--#define pid_t int
--EOF
-+done
-
-+ echo "$as_me:$LINENO: checking whether strerror is declared" >&5
-+echo $ECHO_N "checking whether strerror is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_strerror+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef strerror
-+ char *p = (char *) strerror;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_strerror=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_strerror=no
- fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_strerror" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_strerror" >&6
-+if test $ac_cv_have_decl_strerror = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_STRERROR 1
-+_ACEOF
-+
-
--echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
--echo "configure:2202: checking return type of signal handlers" >&5
--if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2207 "configure"
--#include "confdefs.h"
--#include <sys/types.h>
--#include <signal.h>
--#ifdef signal
--#undef signal
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_STRERROR 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+ echo "$as_me:$LINENO: checking whether strerror_r is declared" >&5
-+echo $ECHO_N "checking whether strerror_r is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_strerror_r+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef strerror_r
-+ char *p = (char *) strerror_r;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_strerror_r=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_strerror_r=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_strerror_r" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_strerror_r" >&6
-+if test $ac_cv_have_decl_strerror_r = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_STRERROR_R 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_STRERROR_R 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+for ac_func in strerror_r
-+do
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
- #endif
-+/* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
--extern "C" void (*signal (int, void (*)(int)))(int);
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
- #else
--void (*signal ()) ();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--int main() {
--int i;
--; return 0; }
--EOF
--if { (eval echo configure:2224: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- ac_cv_type_signal=void
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_type_signal=int
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
--echo "$ac_t""$ac_cv_type_signal" 1>&6
--cat >> confdefs.h <<EOF
--#define RETSIGTYPE $ac_cv_type_signal
--EOF
-+fi
-+done
-+
-+echo "$as_me:$LINENO: checking whether strerror_r returns char *" >&5
-+echo $ECHO_N "checking whether strerror_r returns char *... $ECHO_C" >&6
-+if test "${ac_cv_func_strerror_r_char_p+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+
-+ ac_cv_func_strerror_r_char_p=no
-+ if test $ac_cv_have_decl_strerror_r = yes; then
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-
-+ char buf[100];
-+ char x = *strerror_r (0, buf, sizeof buf);
-+ char *p = strerror_r (0, buf, sizeof buf);
-
--echo $ac_n "checking for size_t""... $ac_c" 1>&6
--echo "configure:2243: checking for size_t" >&5
--if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_strerror_r_char_p=yes
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2248 "configure"
--#include "confdefs.h"
--#include <sys/types.h>
--#if STDC_HEADERS
--#include <stdlib.h>
--#include <stddef.h>
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ else
-+ # strerror_r is not declared. Choose between
-+ # systems that have relatively inaccessible declarations for the
-+ # function. BeOS and DEC UNIX 4.0 fall in this category, but the
-+ # former has a strerror_r that returns char*, while the latter
-+ # has a strerror_r that returns `int'.
-+ # This test should segfault on the DEC system.
-+ if test "$cross_compiling" = yes; then
-+ :
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+ extern char *strerror_r ();
-+int
-+main ()
-+{
-+char buf[100];
-+ char x = *strerror_r (0, buf, sizeof buf);
-+ exit (!isalpha (x));
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_strerror_r_char_p=yes
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+fi
-+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+ fi
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_strerror_r_char_p" >&5
-+echo "${ECHO_T}$ac_cv_func_strerror_r_char_p" >&6
-+if test $ac_cv_func_strerror_r_char_p = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define STRERROR_R_CHAR_P 1
-+_ACEOF
-+
-+fi
-+
-+
-+
-+
-+
-+for ac_func in memchr
-+do
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
- #endif
--EOF
--if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-- egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-- rm -rf conftest*
-- ac_cv_type_size_t=yes
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
- else
-- rm -rf conftest*
-- ac_cv_type_size_t=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
-+else
-+ LIBOBJS="$LIBOBJS $ac_func.$ac_objext"
- fi
--echo "$ac_t""$ac_cv_type_size_t" 1>&6
--if test $ac_cv_type_size_t = no; then
-- cat >> confdefs.h <<\EOF
--#define size_t unsigned
--EOF
-+done
-+
-+
-+ if test $ac_cv_func_memchr = no; then
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_header in bp-sym.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+ac_header_compiler=no
- fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-
--echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
--echo "configure:2276: checking whether time.h and sys/time.h may both be included" >&5
--if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2281 "configure"
--#include "confdefs.h"
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+ fi
-+
-+echo "$as_me:$LINENO: checking whether stat file-mode macros are broken" >&5
-+echo $ECHO_N "checking whether stat file-mode macros are broken... $ECHO_C" >&6
-+if test "${ac_cv_header_stat_broken+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- #include <sys/types.h>
--#include <sys/time.h>
--#include <time.h>
--int main() {
--struct tm *tp;
--; return 0; }
--EOF
--if { (eval echo configure:2290: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- ac_cv_header_time=yes
-+#include <sys/stat.h>
-+
-+#if defined(S_ISBLK) && defined(S_IFDIR)
-+# if S_ISBLK (S_IFDIR)
-+You lose.
-+# endif
-+#endif
-+
-+#if defined(S_ISBLK) && defined(S_IFCHR)
-+# if S_ISBLK (S_IFCHR)
-+You lose.
-+# endif
-+#endif
-+
-+#if defined(S_ISLNK) && defined(S_IFREG)
-+# if S_ISLNK (S_IFREG)
-+You lose.
-+# endif
-+#endif
-+
-+#if defined(S_ISSOCK) && defined(S_IFREG)
-+# if S_ISSOCK (S_IFREG)
-+You lose.
-+# endif
-+#endif
-+
-+_ACEOF
-+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-+ $EGREP "You lose" >/dev/null 2>&1; then
-+ ac_cv_header_stat_broken=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- ac_cv_header_time=no
-+ ac_cv_header_stat_broken=no
- fi
- rm -f conftest*
-+
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_header_stat_broken" >&5
-+echo "${ECHO_T}$ac_cv_header_stat_broken" >&6
-+if test $ac_cv_header_stat_broken = yes; then
-
--echo "$ac_t""$ac_cv_header_time" 1>&6
--if test $ac_cv_header_time = yes; then
-- cat >> confdefs.h <<\EOF
--#define TIME_WITH_SYS_TIME 1
--EOF
-+cat >>confdefs.h <<\_ACEOF
-+#define STAT_MACROS_BROKEN 1
-+_ACEOF
-
- fi
-
-
-- for ac_hdr in utime.h
-+
-+for ac_func in rmdir
- do
--ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
--echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
--echo "configure:2315: checking for $ac_hdr" >&5
--if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2320 "configure"
--#include "confdefs.h"
--#include <$ac_hdr>
--EOF
--ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
--{ (eval echo configure:2325: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
--ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
--if test -z "$ac_err"; then
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=yes"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
- else
-- echo "$ac_err" >&5
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_header_$ac_safe=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
- fi
--if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_hdr 1
--EOF
--
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-+
- else
-- echo "$ac_t""no" 1>&6
-+ LIBOBJS="$LIBOBJS $ac_func.$ac_objext"
- fi
- done
-
--
-- echo $ac_n "checking for struct utimbuf""... $ac_c" 1>&6
--echo "configure:2353: checking for struct utimbuf" >&5
--if eval "test \"`echo '$''{'fu_cv_sys_struct_utimbuf'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+ if test $ac_cv_func_rmdir = no; then
-+
-+
-+ :
-+
-+ fi
-+
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-+
-+for ac_header in stdlib.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2358 "configure"
--#include "confdefs.h"
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
--#ifdef TIME_WITH_SYS_TIME
--# include <sys/time.h>
--# include <time.h>
-+ac_header_compiler=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5
-+echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6
-+if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$cross_compiling" = yes; then
-+ ac_cv_func_malloc_0_nonnull=no
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#if STDC_HEADERS || HAVE_STDLIB_H
-+# include <stdlib.h>
- #else
--# ifdef HAVE_SYS_TIME_H
--# include <sys/time.h>
--# else
--# include <time.h>
--# endif
-+char *malloc ();
- #endif
--#ifdef HAVE_UTIME_H
--# include <utime.h>
-+
-+int
-+main ()
-+{
-+exit (malloc (0) ? 0 : 1);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_malloc_0_nonnull=yes
-+else
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_func_malloc_0_nonnull=no
-+fi
-+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5
-+echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6
-+if test $ac_cv_func_malloc_0_nonnull = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_MALLOC 1
-+_ACEOF
-+
-+else
-+ cat >>confdefs.h <<\_ACEOF
-+#define HAVE_MALLOC 0
-+_ACEOF
-+
-+ LIBOBJS="$LIBOBJS malloc.$ac_objext"
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define malloc rpl_malloc
-+_ACEOF
-+
-+fi
-+
-+
-+
-+
-+
-+ if test X"$ac_cv_func_malloc_0_nonnull" = Xno || test X"$ac_cv_func_malloc_works" = Xno; then
-+
-+ :
-+
-+ fi
-+
-+
-+for ac_header in stdlib.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+echo "$as_me:$LINENO: checking for GNU libc compatible realloc" >&5
-+echo $ECHO_N "checking for GNU libc compatible realloc... $ECHO_C" >&6
-+if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if test "$cross_compiling" = yes; then
-+ ac_cv_func_realloc_0_nonnull=no
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#if STDC_HEADERS || HAVE_STDLIB_H
-+# include <stdlib.h>
-+#else
-+char *realloc ();
- #endif
--
--int main() {
--static struct utimbuf x; x.actime = x.modtime;
--; return 0; }
--EOF
--if { (eval echo configure:2379: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-- rm -rf conftest*
-- fu_cv_sys_struct_utimbuf=yes
-+
-+int
-+main ()
-+{
-+exit (realloc (0, 0) ? 0 : 1);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_realloc_0_nonnull=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- fu_cv_sys_struct_utimbuf=no
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_func_realloc_0_nonnull=no
- fi
--rm -f conftest*
--
-+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+fi
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_realloc_0_nonnull" >&5
-+echo "${ECHO_T}$ac_cv_func_realloc_0_nonnull" >&6
-+if test $ac_cv_func_realloc_0_nonnull = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_REALLOC 1
-+_ACEOF
-+
-+else
-+ cat >>confdefs.h <<\_ACEOF
-+#define HAVE_REALLOC 0
-+_ACEOF
-+
-+ LIBOBJS="$LIBOBJS realloc.$ac_objext"
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define realloc rpl_realloc
-+_ACEOF
-+
- fi
-
--echo "$ac_t""$fu_cv_sys_struct_utimbuf" 1>&6
-
-- if test $fu_cv_sys_struct_utimbuf = yes; then
-- cat >> confdefs.h <<EOF
--#define HAVE_STRUCT_UTIMBUF 1
--EOF
-+
-+
-+
-+ if test X"$ac_cv_func_realloc_0_nonnull" = Xno || test X"$ac_cv_func_realloc_works" = Xno; then
-+
-+ :
-
- fi
-
-
--echo $ac_n "checking for getopt_long""... $ac_c" 1>&6
--echo "configure:2403: checking for getopt_long" >&5
--if eval "test \"`echo '$''{'ac_cv_func_getopt_long'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+
-+
-+
-+
-+
-+for ac_header in stddef.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2408 "configure"
--#include "confdefs.h"
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_header in wchar.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+
-+for ac_header in wctype.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+else
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+
-+
-+
-+for ac_func in iswprint
-+do
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char getopt_long(); below. */
--#include <assert.h>
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char getopt_long();
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
-+#endif
-
--int main() {
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+eval "$as_ac_var=no"
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+done
-+
-+
-+
-+
-+for ac_func in mbsinit
-+do
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
--#if defined (__stub_getopt_long) || defined (__stub___getopt_long)
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--getopt_long();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:2431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_getopt_long=yes"
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_getopt_long=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+done
-+
-+
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-+
-+
-
--if eval "test \"`echo '$ac_cv_func_'getopt_long`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
- :
-+
-+
-+
-+
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking for mbstate_t" >&5
-+echo $ECHO_N "checking for mbstate_t... $ECHO_C" >&6
-+if test "${ac_cv_type_mbstate_t+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- echo "$ac_t""no" 1>&6
--LIBOBJS="$LIBOBJS getopt1\$U.o getopt\$U.o"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+# include <wchar.h>
-+int
-+main ()
-+{
-+mbstate_t x; return sizeof x;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_type_mbstate_t=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_type_mbstate_t=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_type_mbstate_t" >&5
-+echo "${ECHO_T}$ac_cv_type_mbstate_t" >&6
-+ if test $ac_cv_type_mbstate_t = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_MBSTATE_T 1
-+_ACEOF
-
-+ else
-
--for ac_func in _doprintf isascii fseeko memcmp mktemp \
-- pathconf raise setmode sigaction sigprocmask sigsetmask strerror
-+cat >>confdefs.h <<\_ACEOF
-+#define mbstate_t int
-+_ACEOF
-+
-+ fi
-+
-+ echo "$as_me:$LINENO: checking whether mbrtowc and mbstate_t are properly declared" >&5
-+echo $ECHO_N "checking whether mbrtowc and mbstate_t are properly declared... $ECHO_C" >&6
-+if test "${jm_cv_func_mbrtowc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <wchar.h>
-+int
-+main ()
-+{
-+mbstate_t state; return ! (sizeof state && mbrtowc);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ jm_cv_func_mbrtowc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+jm_cv_func_mbrtowc=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $jm_cv_func_mbrtowc" >&5
-+echo "${ECHO_T}$jm_cv_func_mbrtowc" >&6
-+ if test $jm_cv_func_mbrtowc = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_MBRTOWC 1
-+_ACEOF
-+
-+ fi
-+
-+
-+
-+
-+
-+
-+
-+for ac_func in pathconf
- do
--echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:2456: checking for $ac_func" >&5
--if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2461 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func(); below. */
--#include <assert.h>
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func();
--
--int main() {
--
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--$ac_func();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:2484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=yes"
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
--if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_func 1
--EOF
--
-+fi
-+done
-+
-+
-+
-+
-+for ac_header in limits.h string.h unistd.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
- fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
- done
-
--for ac_func in memchr mkdir rename rmdir
-+
-+
-+echo "$as_me:$LINENO: checking whether free is declared" >&5
-+echo $ECHO_N "checking whether free is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_free+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef free
-+ char *p = (char *) free;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_free=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_free=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_free" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_free" >&6
-+if test $ac_cv_have_decl_free = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FREE 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FREE 0
-+_ACEOF
-+
-+
-+fi
-+echo "$as_me:$LINENO: checking whether getenv is declared" >&5
-+echo $ECHO_N "checking whether getenv is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_getenv+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef getenv
-+ char *p = (char *) getenv;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_getenv=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_getenv=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_getenv" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_getenv" >&6
-+if test $ac_cv_have_decl_getenv = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_GETENV 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_GETENV 0
-+_ACEOF
-+
-+
-+fi
-+echo "$as_me:$LINENO: checking whether malloc is declared" >&5
-+echo $ECHO_N "checking whether malloc is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_malloc+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef malloc
-+ char *p = (char *) malloc;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_malloc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_malloc=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_malloc" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_malloc" >&6
-+if test $ac_cv_have_decl_malloc = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_MALLOC 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_MALLOC 0
-+_ACEOF
-+
-+
-+fi
-+echo "$as_me:$LINENO: checking whether mktemp is declared" >&5
-+echo $ECHO_N "checking whether mktemp is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_mktemp+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef mktemp
-+ char *p = (char *) mktemp;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_mktemp=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_mktemp=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_mktemp" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_mktemp" >&6
-+if test $ac_cv_have_decl_mktemp = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_MKTEMP 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_MKTEMP 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+for ac_func in _doprintf geteuid getuid isascii memcmp mktemp \
-+ pathconf raise sigaction sigprocmask sigsetmask strerror
- do
--echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
--echo "configure:2511: checking for $ac_func" >&5
--if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2516 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char $ac_func(); below. */
--#include <assert.h>
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char $ac_func();
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
-+#endif
-
--int main() {
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+eval "$as_ac_var=no"
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+done
-+
-+
-+
-+for ac_func in mkdir strncasecmp
-+do
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--$ac_func();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:2539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=yes"
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_$ac_func=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
--if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-- cat >> confdefs.h <<EOF
--#define $ac_tr_func 1
--EOF
--
- else
-- echo "$ac_t""no" 1>&6
--LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}"
-+ LIBOBJS="$LIBOBJS $ac_func.$ac_objext"
- fi
- done
-
-
-+echo "$as_me:$LINENO: checking for _LARGEFILE_SOURCE value needed for large files" >&5
-+echo $ECHO_N "checking for _LARGEFILE_SOURCE value needed for large files... $ECHO_C" >&6
-+if test "${ac_cv_sys_largefile_source+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ while :; do
-+ ac_cv_sys_largefile_source=no
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdio.h>
-+int
-+main ()
-+{
-+return !fseeko;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-- cat >> confdefs.h <<EOF
--#define HAVE_DONE_WORKING_MALLOC_CHECK 1
--EOF
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#define _LARGEFILE_SOURCE 1
-+#include <stdio.h>
-+int
-+main ()
-+{
-+return !fseeko;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_sys_largefile_source=1; break
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ break
-+done
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_source" >&5
-+echo "${ECHO_T}$ac_cv_sys_largefile_source" >&6
-+if test "$ac_cv_sys_largefile_source" != no; then
-
-- echo $ac_n "checking for working malloc""... $ac_c" 1>&6
--echo "configure:2572: checking for working malloc" >&5
--if eval "test \"`echo '$''{'jm_cv_func_working_malloc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+cat >>confdefs.h <<_ACEOF
-+#define _LARGEFILE_SOURCE $ac_cv_sys_largefile_source
-+_ACEOF
-+
-+fi
-+rm -f conftest*
-+
-+# We used to try defining _XOPEN_SOURCE=500 too, to work around a bug
-+# in glibc 2.1.3, but that breaks too many other things.
-+# If you want fseeko and ftello with glibc, upgrade to a fixed glibc.
-+echo "$as_me:$LINENO: checking for fseeko" >&5
-+echo $ECHO_N "checking for fseeko... $ECHO_C" >&6
-+if test "${ac_cv_func_fseeko+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- if test "$cross_compiling" = yes; then
-- jm_cv_func_working_malloc=no
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <stdio.h>
-+int
-+main ()
-+{
-+return fseeko && fseeko (stdin, 0, 0);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_fseeko=yes
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2580 "configure"
--#include "confdefs.h"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-- char *malloc ();
-- int
-- main ()
-- {
-- exit (malloc (0) ? 0 : 1);
-- }
--
--EOF
--if { (eval echo configure:2591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-- jm_cv_func_working_malloc=yes
-+ac_cv_func_fseeko=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_fseeko" >&5
-+echo "${ECHO_T}$ac_cv_func_fseeko" >&6
-+if test $ac_cv_func_fseeko = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_FSEEKO 1
-+_ACEOF
-+
-+fi
-+
-+
-+ echo "$as_me:$LINENO: checking whether clearerr_unlocked is declared" >&5
-+echo $ECHO_N "checking whether clearerr_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_clearerr_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- jm_cv_func_working_malloc=no
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef clearerr_unlocked
-+ char *p = (char *) clearerr_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_clearerr_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_clearerr_unlocked=no
- fi
--rm -fr conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_clearerr_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_clearerr_unlocked" >&6
-+if test $ac_cv_have_decl_clearerr_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_CLEARERR_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_CLEARERR_UNLOCKED 0
-+_ACEOF
-+
-
--
- fi
-
--echo "$ac_t""$jm_cv_func_working_malloc" 1>&6
-- if test $jm_cv_func_working_malloc = no; then
--
-- LIBOBJS="$LIBOBJS malloc.$ac_objext"
-- cat >> confdefs.h <<EOF
--#define malloc rpl_malloc
--EOF
-
-- fi
-
-
-- cat >> confdefs.h <<EOF
--#define HAVE_DONE_WORKING_REALLOC_CHECK 1
--EOF
-+ echo "$as_me:$LINENO: checking whether feof_unlocked is declared" >&5
-+echo $ECHO_N "checking whether feof_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_feof_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef feof_unlocked
-+ char *p = (char *) feof_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_feof_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_feof_unlocked=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_feof_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_feof_unlocked" >&6
-+if test $ac_cv_have_decl_feof_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FEOF_UNLOCKED 1
-+_ACEOF
-
-
-- echo $ac_n "checking for working realloc""... $ac_c" 1>&6
--echo "configure:2623: checking for working realloc" >&5
--if eval "test \"`echo '$''{'jm_cv_func_working_realloc'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
- else
-- if test "$cross_compiling" = yes; then
-- jm_cv_func_working_realloc=no
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FEOF_UNLOCKED 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether ferror_unlocked is declared" >&5
-+echo $ECHO_N "checking whether ferror_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_ferror_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2631 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef ferror_unlocked
-+ char *p = (char *) ferror_unlocked;
-+#endif
-
-- char *realloc ();
-- int
-- main ()
-- {
-- exit (realloc (0, 0) ? 0 : 1);
-- }
--
--EOF
--if { (eval echo configure:2642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-- jm_cv_func_working_realloc=yes
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_ferror_unlocked=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- jm_cv_func_working_realloc=no
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_ferror_unlocked=no
- fi
--rm -fr conftest*
-+rm -f conftest.$ac_objext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_ferror_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_ferror_unlocked" >&6
-+if test $ac_cv_have_decl_ferror_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FERROR_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FERROR_UNLOCKED 0
-+_ACEOF
-+
-
--
- fi
-
--echo "$ac_t""$jm_cv_func_working_realloc" 1>&6
-- if test $jm_cv_func_working_realloc = no; then
--
-- LIBOBJS="$LIBOBJS realloc.$ac_objext"
-- cat >> confdefs.h <<EOF
--#define realloc rpl_realloc
--EOF
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether fflush_unlocked is declared" >&5
-+echo $ECHO_N "checking whether fflush_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_fflush_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef fflush_unlocked
-+ char *p = (char *) fflush_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_fflush_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_fflush_unlocked=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_fflush_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_fflush_unlocked" >&6
-+if test $ac_cv_have_decl_fflush_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FFLUSH_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FFLUSH_UNLOCKED 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether fgets_unlocked is declared" >&5
-+echo $ECHO_N "checking whether fgets_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_fgets_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef fgets_unlocked
-+ char *p = (char *) fgets_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_fgets_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_fgets_unlocked=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_fgets_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_fgets_unlocked" >&6
-+if test $ac_cv_have_decl_fgets_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FGETS_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FGETS_UNLOCKED 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether fputc_unlocked is declared" >&5
-+echo $ECHO_N "checking whether fputc_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_fputc_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef fputc_unlocked
-+ char *p = (char *) fputc_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_fputc_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_fputc_unlocked=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_fputc_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_fputc_unlocked" >&6
-+if test $ac_cv_have_decl_fputc_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FPUTC_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FPUTC_UNLOCKED 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether fputs_unlocked is declared" >&5
-+echo $ECHO_N "checking whether fputs_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_fputs_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef fputs_unlocked
-+ char *p = (char *) fputs_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_fputs_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_fputs_unlocked=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_fputs_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_fputs_unlocked" >&6
-+if test $ac_cv_have_decl_fputs_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FPUTS_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FPUTS_UNLOCKED 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether fread_unlocked is declared" >&5
-+echo $ECHO_N "checking whether fread_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_fread_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef fread_unlocked
-+ char *p = (char *) fread_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_fread_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_fread_unlocked=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_fread_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_fread_unlocked" >&6
-+if test $ac_cv_have_decl_fread_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FREAD_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FREAD_UNLOCKED 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether fwrite_unlocked is declared" >&5
-+echo $ECHO_N "checking whether fwrite_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_fwrite_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef fwrite_unlocked
-+ char *p = (char *) fwrite_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_fwrite_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_fwrite_unlocked=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_fwrite_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_fwrite_unlocked" >&6
-+if test $ac_cv_have_decl_fwrite_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FWRITE_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_FWRITE_UNLOCKED 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether getc_unlocked is declared" >&5
-+echo $ECHO_N "checking whether getc_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_getc_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef getc_unlocked
-+ char *p = (char *) getc_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_getc_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_getc_unlocked=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_getc_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_getc_unlocked" >&6
-+if test $ac_cv_have_decl_getc_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_GETC_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_GETC_UNLOCKED 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether getchar_unlocked is declared" >&5
-+echo $ECHO_N "checking whether getchar_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_getchar_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef getchar_unlocked
-+ char *p = (char *) getchar_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_getchar_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_getchar_unlocked=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_getchar_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_getchar_unlocked" >&6
-+if test $ac_cv_have_decl_getchar_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_GETCHAR_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_GETCHAR_UNLOCKED 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether putc_unlocked is declared" >&5
-+echo $ECHO_N "checking whether putc_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_putc_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef putc_unlocked
-+ char *p = (char *) putc_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_putc_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_putc_unlocked=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_putc_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_putc_unlocked" >&6
-+if test $ac_cv_have_decl_putc_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_PUTC_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_PUTC_UNLOCKED 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether putchar_unlocked is declared" >&5
-+echo $ECHO_N "checking whether putchar_unlocked is declared... $ECHO_C" >&6
-+if test "${ac_cv_have_decl_putchar_unlocked+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+int
-+main ()
-+{
-+#ifndef putchar_unlocked
-+ char *p = (char *) putchar_unlocked;
-+#endif
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_have_decl_putchar_unlocked=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_have_decl_putchar_unlocked=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_have_decl_putchar_unlocked" >&5
-+echo "${ECHO_T}$ac_cv_have_decl_putchar_unlocked" >&6
-+if test $ac_cv_have_decl_putchar_unlocked = yes; then
-+
-+cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_PUTCHAR_UNLOCKED 1
-+_ACEOF
-+
-+
-+else
-+ cat >>confdefs.h <<_ACEOF
-+#define HAVE_DECL_PUTCHAR_UNLOCKED 0
-+_ACEOF
-+
-+
-+fi
-+
-+
-+
-+
-+
-+
-+
-+ :
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+ if test X"$ac_cv_func_malloc_0_nonnull" = Xno || test X"$ac_cv_func_malloc_works" = Xno; then
-+
-+ :
-
- fi
-
--echo $ac_n "checking whether closedir returns void""... $ac_c" 1>&6
--echo "configure:2668: checking whether closedir returns void" >&5
--if eval "test \"`echo '$''{'ac_cv_func_closedir_void'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+
-+ if test X"$ac_cv_func_realloc_0_nonnull" = Xno || test X"$ac_cv_func_realloc_works" = Xno; then
-+
-+ :
-+
-+ fi
-+
-+echo "$as_me:$LINENO: checking whether closedir returns void" >&5
-+echo $ECHO_N "checking whether closedir returns void... $ECHO_C" >&6
-+if test "${ac_cv_func_closedir_void+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- if test "$cross_compiling" = yes; then
- ac_cv_func_closedir_void=yes
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2676 "configure"
--#include "confdefs.h"
--#include <sys/types.h>
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
- #include <$ac_header_dirent>
--int closedir(); main() { exit(closedir(opendir(".")) != 0); }
--EOF
--if { (eval echo configure:2682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
--then
-+#ifndef __cplusplus
-+int closedir ();
-+#endif
-+
-+int
-+main ()
-+{
-+exit (closedir (opendir (".")) != 0);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
- ac_cv_func_closedir_void=no
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -fr conftest*
-- ac_cv_func_closedir_void=yes
-+ echo "$as_me: program exited with status $ac_status" >&5
-+echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+( exit $ac_status )
-+ac_cv_func_closedir_void=yes
- fi
--rm -fr conftest*
-+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
--
- fi
--
--echo "$ac_t""$ac_cv_func_closedir_void" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_func_closedir_void" >&5
-+echo "${ECHO_T}$ac_cv_func_closedir_void" >&6
- if test $ac_cv_func_closedir_void = yes; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define CLOSEDIR_VOID 1
--EOF
-+_ACEOF
-
- fi
-
--echo $ac_n "checking for vprintf""... $ac_c" 1>&6
--echo "configure:2705: checking for vprintf" >&5
--if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+
-+
-+for ac_header in fcntl.h unistd.h
-+do
-+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2710 "configure"
--#include "confdefs.h"
-+ # Is the header compilable?
-+echo "$as_me:$LINENO: checking $ac_header usability" >&5
-+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+$ac_includes_default
-+#include <$ac_header>
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_header_compiler=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_header_compiler=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+# Is the header present?
-+echo "$as_me:$LINENO: checking $ac_header presence" >&5
-+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <$ac_header>
-+_ACEOF
-+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+ ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } >/dev/null; then
-+ if test -s conftest.err; then
-+ ac_cpp_err=$ac_c_preproc_warn_flag
-+ else
-+ ac_cpp_err=
-+ fi
-+else
-+ ac_cpp_err=yes
-+fi
-+if test -z "$ac_cpp_err"; then
-+ ac_header_preproc=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_header_preproc=no
-+fi
-+rm -f conftest.err conftest.$ac_ext
-+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6
-+
-+# So? What about this header?
-+case $ac_header_compiler:$ac_header_preproc in
-+ yes:no )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+ no:yes )
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
-+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-+ (
-+ cat <<\_ASBOX
-+## ------------------------------------ ##
-+## Report this to bug-autoconf at gnu.org. ##
-+## ------------------------------------ ##
-+_ASBOX
-+ ) |
-+ sed "s/^/$as_me: WARNING: /" >&2
-+ ;;
-+esac
-+echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ eval "$as_ac_Header=$ac_header_preproc"
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+
-+fi
-+if test `eval echo '${'$as_ac_Header'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-+_ACEOF
-+
-+fi
-+
-+done
-+
-+ echo "$as_me:$LINENO: checking for DOS-style setmode" >&5
-+echo $ECHO_N "checking for DOS-style setmode... $ECHO_C" >&6
-+if test "${ac_cv_func_setmode_dos+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+#include <io.h>
-+ #if HAVE_FCNTL_H
-+ # include <fcntl.h>
-+ #endif
-+ #if HAVE_UNISTD_H
-+ # include <unistd.h>
-+ #endif
-+int
-+main ()
-+{
-+int ret = setmode && setmode (1, O_BINARY);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func_setmode_dos=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func_setmode_dos=no
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_func_setmode_dos" >&5
-+echo "${ECHO_T}$ac_cv_func_setmode_dos" >&6
-+ if test $ac_cv_func_setmode_dos = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_SETMODE_DOS 1
-+_ACEOF
-+
-+ fi
-+
-+for ac_func in vprintf
-+do
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char vprintf(); below. */
--#include <assert.h>
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char vprintf();
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
-+/* The GNU C library defines this for functions which it implements
-+ to always fail with ENOSYS. Some functions are actually named
-+ something starting with __ and the normal name is an alias. */
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-+choke me
-+#else
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
-+#endif
-
--int main() {
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-
-+eval "$as_ac_var=no"
-+fi
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
-+fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-+
-+echo "$as_me:$LINENO: checking for _doprnt" >&5
-+echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6
-+if test "${ac_cv_func__doprnt+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+/* System header to define __stub macros and hopefully few prototypes,
-+ which can conflict with char _doprnt (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
-+/* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
-+/* We use char because int might match the return type of a gcc2
-+ builtin and then its argument prototype would still apply. */
-+char _doprnt ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
--#if defined (__stub_vprintf) || defined (__stub___vprintf)
-+#if defined (__stub__doprnt) || defined (__stub____doprnt)
- choke me
- #else
--vprintf();
-+char (*f) () = _doprnt;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:2733: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func_vprintf=yes"
-+int
-+main ()
-+{
-+return f != _doprnt;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_func__doprnt=yes
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func_vprintf=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_func__doprnt=no
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5
-+echo "${ECHO_T}$ac_cv_func__doprnt" >&6
-+if test $ac_cv_func__doprnt = yes; then
-
--if eval "test \"`echo '$ac_cv_func_'vprintf`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
--#define HAVE_VPRINTF 1
--EOF
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_DOPRNT 1
-+_ACEOF
-
--else
-- echo "$ac_t""no" 1>&6
- fi
-
--if test "$ac_cv_func_vprintf" != yes; then
--echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
--echo "configure:2757: checking for _doprnt" >&5
--if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+done
-+
-+
-+
-+for ac_func in mkdir
-+do
-+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-+echo "$as_me:$LINENO: checking for $ac_func" >&5
-+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-+if eval "test \"\${$as_ac_var+set}\" = set"; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat > conftest.$ac_ext <<EOF
--#line 2762 "configure"
--#include "confdefs.h"
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
- /* System header to define __stub macros and hopefully few prototypes,
-- which can conflict with char _doprnt(); below. */
--#include <assert.h>
-+ which can conflict with char $ac_func (); below.
-+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-+ <limits.h> exists even on freestanding compilers. */
-+#ifdef __STDC__
-+# include <limits.h>
-+#else
-+# include <assert.h>
-+#endif
- /* Override any gcc2 internal prototype to avoid an error. */
-+#ifdef __cplusplus
-+extern "C"
-+{
-+#endif
- /* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
--char _doprnt();
--
--int main() {
--
-+ builtin and then its argument prototype would still apply. */
-+char $ac_func ();
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
--#if defined (__stub__doprnt) || defined (__stub____doprnt)
-+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
- choke me
- #else
--_doprnt();
-+char (*f) () = $ac_func;
-+#endif
-+#ifdef __cplusplus
-+}
- #endif
-
--; return 0; }
--EOF
--if { (eval echo configure:2785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- eval "ac_cv_func__doprnt=yes"
-+int
-+main ()
-+{
-+return f != $ac_func;
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext conftest$ac_exeext
-+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-+ (eval $ac_link) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest$ac_exeext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ eval "$as_ac_var=yes"
- else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- eval "ac_cv_func__doprnt=no"
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+eval "$as_ac_var=no"
- fi
--rm -f conftest*
-+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
- fi
-+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-+if test `eval echo '${'$as_ac_var'}'` = yes; then
-+ cat >>confdefs.h <<_ACEOF
-+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-+_ACEOF
-
--if eval "test \"`echo '$ac_cv_func_'_doprnt`\" = yes"; then
-- echo "$ac_t""yes" 1>&6
-- cat >> confdefs.h <<\EOF
--#define HAVE_DOPRNT 1
--EOF
-+fi
-+done
-
-+ echo "$as_me:$LINENO: checking whether mkdir takes only one argument" >&5
-+echo $ECHO_N "checking whether mkdir takes only one argument... $ECHO_C" >&6
-+if test "${patch_cv_mkdir_takes_one_arg+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- echo "$ac_t""no" 1>&6
-+ patch_cv_mkdir_takes_one_arg=no
-+ if test $ac_cv_func_mkdir = yes; then
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+
-+int
-+main ()
-+{
-+mkdir (".", 0);
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+
-+int
-+main ()
-+{
-+mkdir (".");
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ patch_cv_mkdir_takes_one_arg=yes
-+
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
- fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-
- fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+ fi
-
-
--echo $ac_n "checking for long file names""... $ac_c" 1>&6
--echo "configure:2811: checking for long file names" >&5
--if eval "test \"`echo '$''{'ac_cv_sys_long_file_names'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
-+fi
-+echo "$as_me:$LINENO: result: $patch_cv_mkdir_takes_one_arg" >&5
-+echo "${ECHO_T}$patch_cv_mkdir_takes_one_arg" >&6
-+ if test $patch_cv_mkdir_takes_one_arg = yes; then
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define MKDIR_TAKES_ONE_ARG 1
-+_ACEOF
-+
-+ fi
-+
-+
-+
-+
-+ echo "$as_me:$LINENO: checking whether system is Windows or MSDOS" >&5
-+echo $ECHO_N "checking whether system is Windows or MSDOS... $ECHO_C" >&6
-+if test "${ac_cv_win_or_dos+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+
-+ cat >conftest.$ac_ext <<_ACEOF
-+#line $LINENO "configure"
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+#if !defined _WIN32 && !defined __WIN32__ && !defined __MSDOS__
-+neither MSDOS nor Windows
-+#endif
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-+ (eval $ac_compile) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); } &&
-+ { ac_try='test -s conftest.$ac_objext'
-+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-+ (eval $ac_try) 2>&5
-+ ac_status=$?
-+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; }; then
-+ ac_cv_win_or_dos=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ac_cv_win_or_dos=no
-+fi
-+rm -f conftest.$ac_objext conftest.$ac_ext
-+
-+fi
-+echo "$as_me:$LINENO: result: $ac_cv_win_or_dos" >&5
-+echo "${ECHO_T}$ac_cv_win_or_dos" >&6
-+
-+ if test x"$ac_cv_win_or_dos" = xyes; then
-+ ac_fs_accepts_drive_letter_prefix=1
-+ ac_fs_backslash_is_file_name_separator=1
-+ else
-+ ac_fs_accepts_drive_letter_prefix=0
-+ ac_fs_backslash_is_file_name_separator=0
-+ fi
-+
-+
-+
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define FILESYSTEM_ACCEPTS_DRIVE_LETTER_PREFIX $ac_fs_accepts_drive_letter_prefix
-+_ACEOF
-+
-+
-+
-+
-+
-+
-+cat >>confdefs.h <<_ACEOF
-+#define FILESYSTEM_BACKSLASH_IS_FILE_NAME_SEPARATOR $ac_fs_backslash_is_file_name_separator
-+_ACEOF
-+
-+
-+echo "$as_me:$LINENO: checking for long file names" >&5
-+echo $ECHO_N "checking for long file names... $ECHO_C" >&6
-+if test "${ac_cv_sys_long_file_names+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- ac_cv_sys_long_file_names=yes
- # Test for long file names in all the places we know might matter:
-@@ -2823,459 +10771,1123 @@
- # /var/tmp likewise
- # /usr/tmp likewise
- if test -n "$TMPDIR" && test -d "$TMPDIR" && test -w "$TMPDIR"; then
-- ac_tmpdirs="$TMPDIR"
-+ ac_tmpdirs=$TMPDIR
- else
- ac_tmpdirs='/tmp /var/tmp /usr/tmp'
- fi
- for ac_dir in . $ac_tmpdirs `eval echo $prefix/lib $exec_prefix/lib` ; do
- test -d $ac_dir || continue
- test -w $ac_dir || continue # It is less confusing to not echo anything here.
-- (echo 1 > $ac_dir/conftest9012345) 2>/dev/null
-- (echo 2 > $ac_dir/conftest9012346) 2>/dev/null
-- val=`cat $ac_dir/conftest9012345 2>/dev/null`
-- if test ! -f $ac_dir/conftest9012345 || test "$val" != 1; then
-+ ac_xdir=$ac_dir/cf$$
-+ (umask 077 && mkdir $ac_xdir 2>/dev/null) || continue
-+ ac_tf1=$ac_xdir/conftest9012345
-+ ac_tf2=$ac_xdir/conftest9012346
-+ (echo 1 >$ac_tf1) 2>/dev/null
-+ (echo 2 >$ac_tf2) 2>/dev/null
-+ ac_val=`cat $ac_tf1 2>/dev/null`
-+ if test ! -f $ac_tf1 || test "$ac_val" != 1; then
- ac_cv_sys_long_file_names=no
-- rm -f $ac_dir/conftest9012345 $ac_dir/conftest9012346 2>/dev/null
-+ rm -rf $ac_xdir 2>/dev/null
- break
- fi
-- rm -f $ac_dir/conftest9012345 $ac_dir/conftest9012346 2>/dev/null
-+ rm -rf $ac_xdir 2>/dev/null
- done
- fi
--
--echo "$ac_t""$ac_cv_sys_long_file_names" 1>&6
-+echo "$as_me:$LINENO: result: $ac_cv_sys_long_file_names" >&5
-+echo "${ECHO_T}$ac_cv_sys_long_file_names" >&6
- if test $ac_cv_sys_long_file_names = yes; then
-- cat >> confdefs.h <<\EOF
-+
-+cat >>confdefs.h <<\_ACEOF
- #define HAVE_LONG_FILE_NAMES 1
--EOF
-+_ACEOF
-
- fi
-
-- echo $ac_n "checking for d_ino member in directory struct""... $ac_c" 1>&6
--echo "configure:2855: checking for d_ino member in directory struct" >&5
--if eval "test \"`echo '$''{'jm_cv_struct_dirent_d_ino'+set}'`\" = set"; then
-- echo $ac_n "(cached) $ac_c" 1>&6
--else
-- cat > conftest.$ac_ext <<EOF
--#line 2860 "configure"
--#include "confdefs.h"
--
--#include <sys/types.h>
--#ifdef HAVE_DIRENT_H
--# include <dirent.h>
--#else /* not HAVE_DIRENT_H */
--# define dirent direct
--# ifdef HAVE_SYS_NDIR_H
--# include <sys/ndir.h>
--# endif /* HAVE_SYS_NDIR_H */
--# ifdef HAVE_SYS_DIR_H
--# include <sys/dir.h>
--# endif /* HAVE_SYS_DIR_H */
--# ifdef HAVE_NDIR_H
--# include <ndir.h>
--# endif /* HAVE_NDIR_H */
--#endif /* HAVE_DIRENT_H */
--
--int main() {
--struct dirent dp; dp.d_ino = 0;
--; return 0; }
--EOF
--if { (eval echo configure:2883: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-- rm -rf conftest*
-- jm_cv_struct_dirent_d_ino=yes
--else
-- echo "configure: failed program was:" >&5
-- cat conftest.$ac_ext >&5
-- rm -rf conftest*
-- jm_cv_struct_dirent_d_ino=no
--fi
--rm -f conftest*
--
--
--fi
--
--echo "$ac_t""$jm_cv_struct_dirent_d_ino" 1>&6
-- if test $jm_cv_struct_dirent_d_ino = yes; then
-- cat >> confdefs.h <<\EOF
--#define D_INO_IN_DIRENT 1
--EOF
--
-- fi
--
-
-+ ac_config_files="$ac_config_files Makefile"
-
--trap '' 1 2 15
--cat > confcache <<\EOF
-+cat >confcache <<\_ACEOF
- # This file is a shell script that caches the results of configure
- # tests run on this system so they can be shared between configure
--# scripts and configure runs. It is not useful on other systems.
--# If it contains results you don't want to keep, you may remove or edit it.
-+# scripts and configure runs, see configure's option --config-cache.
-+# It is not useful on other systems. If it contains results you don't
-+# want to keep, you may remove or edit it.
- #
--# By default, configure uses ./config.cache as the cache file,
--# creating it if it does not exist already. You can give configure
--# the --cache-file=FILE option to use a different cache file; that is
--# what configure does when it calls configure scripts in
--# subdirectories, so they share the cache.
--# Giving --cache-file=/dev/null disables caching, for debugging configure.
--# config.status only pays attention to the cache file if you give it the
--# --recheck option to rerun configure.
-+# config.status only pays attention to the cache file if you give it
-+# the --recheck option to rerun configure.
- #
--EOF
-+# `ac_cv_env_foo' variables (set or unset) will be overridden when
-+# loading this file, other *unset* `ac_cv_foo' will be assigned the
-+# following values.
-+
-+_ACEOF
-+
- # The following way of writing the cache mishandles newlines in values,
- # but we know of no workaround that is simple, portable, and efficient.
- # So, don't put newlines in cache variables' values.
- # Ultrix sh set writes to stderr and can't be redirected directly,
- # and sets the high bit in the cache file unless we assign to the vars.
--(set) 2>&1 |
-- case `(ac_space=' '; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-- # `set' does not quote correctly, so add quotes (double-quote substitution
-- # turns \\\\ into \\, and sed turns \\ into \).
-- sed -n \
-- -e "s/'/'\\\\''/g" \
-- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-- ;;
-- *)
-- # `set' quotes correctly as required by POSIX, so do not add quotes.
-- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-- ;;
-- esac >> confcache
--if cmp -s $cache_file confcache; then
-- :
--else
-+{
-+ (set) 2>&1 |
-+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
-+ *ac_space=\ *)
-+ # `set' does not quote correctly, so add quotes (double-quote
-+ # substitution turns \\\\ into \\, and sed turns \\ into \).
-+ sed -n \
-+ "s/'/'\\\\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-+ ;;
-+ *)
-+ # `set' quotes correctly as required by POSIX, so do not add quotes.
-+ sed -n \
-+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ ;;
-+ esac;
-+} |
-+ sed '
-+ t clear
-+ : clear
-+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-+ t end
-+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+ : end' >>confcache
-+if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
-- echo "updating cache $cache_file"
-- cat confcache > $cache_file
-+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-+ cat confcache >$cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
- fi
- rm -f confcache
-
--trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
--
- test "x$prefix" = xNONE && prefix=$ac_default_prefix
- # Let make expand exec_prefix.
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
--# Any assignment to VPATH causes Sun make to only execute
--# the first set of double-colon rules, so remove it if not needed.
--# If there is a colon in the path, we need to keep it.
-+# VPATH may cause trouble with some makes, so we remove $(srcdir),
-+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
- if test "x$srcdir" = x.; then
-- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
-+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
-+s/:*\$(srcdir):*/:/;
-+s/:*\${srcdir}:*/:/;
-+s/:*@srcdir@:*/:/;
-+s/^\([^=]*=[ ]*\):*/\1/;
-+s/:*$//;
-+s/^[^=]*=[ ]*$//;
-+}'
- fi
-
--trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
--
- DEFS=-DHAVE_CONFIG_H
-
--# Without the "./", some shells look in PATH for config.status.
--: ${CONFIG_STATUS=./config.status}
-+ac_libobjs=
-+ac_ltlibobjs=
-+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-+ # 1. Remove the extension, and $U if already installed.
-+ ac_i=`echo "$ac_i" |
-+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-+ # 2. Add them.
-+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-+done
-+LIBOBJS=$ac_libobjs
-
--echo creating $CONFIG_STATUS
--rm -f $CONFIG_STATUS
--cat > $CONFIG_STATUS <<EOF
--#! /bin/sh
--# Generated automatically by configure.
-+LTLIBOBJS=$ac_ltlibobjs
-+
-+
-+
-+: ${CONFIG_STATUS=./config.status}
-+ac_clean_files_save=$ac_clean_files
-+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-+echo "$as_me: creating $CONFIG_STATUS" >&6;}
-+cat >$CONFIG_STATUS <<_ACEOF
-+#! $SHELL
-+# Generated by $as_me.
- # Run this file to recreate the current configuration.
--# This directory was configured as follows,
--# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
--#
--# $0 $ac_configure_args
--#
- # Compiler output produced by configure, useful for debugging
--# configure, is in ./config.log if it exists.
-+# configure, is in config.log if it exists.
-
--ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
--for ac_option
-+debug=false
-+ac_cs_recheck=false
-+ac_cs_silent=false
-+SHELL=\${CONFIG_SHELL-$SHELL}
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+## --------------------- ##
-+## M4sh Initialization. ##
-+## --------------------- ##
-+
-+# Be Bourne compatible
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-+ set -o posix
-+fi
-+
-+# Support unset when possible.
-+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
-+ as_unset=unset
-+else
-+ as_unset=false
-+fi
-+
-+
-+# Work around bugs in pre-3.0 UWIN ksh.
-+$as_unset ENV MAIL MAILPATH
-+PS1='$ '
-+PS2='> '
-+PS4='+ '
-+
-+# NLS nuisances.
-+for as_var in \
-+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-+ LC_TELEPHONE LC_TIME
- do
-- case "\$ac_option" in
-- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-- echo "$CONFIG_STATUS generated by autoconf version 2.13"
-- exit 0 ;;
-- -help | --help | --hel | --he | --h)
-- echo "\$ac_cs_usage"; exit 0 ;;
-- *) echo "\$ac_cs_usage"; exit 1 ;;
-- esac
-+ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
-+ eval $as_var=C; export $as_var
-+ else
-+ $as_unset $as_var
-+ fi
- done
-
--ac_given_srcdir=$srcdir
--ac_given_INSTALL="$INSTALL"
-+# Required to use basename.
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-
--trap 'rm -fr `echo "Makefile config.h:config.hin" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
--EOF
--cat >> $CONFIG_STATUS <<EOF
-+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+ as_basename=basename
-+else
-+ as_basename=false
-+fi
-
--# Protect against being on the right side of a sed subst in config.status.
--sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
-- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
--$ac_vpsub
--$extrasub
--s%@SHELL@%$SHELL%g
--s%@CFLAGS@%$CFLAGS%g
--s%@CPPFLAGS@%$CPPFLAGS%g
--s%@CXXFLAGS@%$CXXFLAGS%g
--s%@FFLAGS@%$FFLAGS%g
--s%@DEFS@%$DEFS%g
--s%@LDFLAGS@%$LDFLAGS%g
--s%@LIBS@%$LIBS%g
--s%@exec_prefix@%$exec_prefix%g
--s%@prefix@%$prefix%g
--s%@program_transform_name@%$program_transform_name%g
--s%@bindir@%$bindir%g
--s%@sbindir@%$sbindir%g
--s%@libexecdir@%$libexecdir%g
--s%@datadir@%$datadir%g
--s%@sysconfdir@%$sysconfdir%g
--s%@sharedstatedir@%$sharedstatedir%g
--s%@localstatedir@%$localstatedir%g
--s%@libdir@%$libdir%g
--s%@includedir@%$includedir%g
--s%@oldincludedir@%$oldincludedir%g
--s%@infodir@%$infodir%g
--s%@mandir@%$mandir%g
--s%@host@%$host%g
--s%@host_alias@%$host_alias%g
--s%@host_cpu@%$host_cpu%g
--s%@host_vendor@%$host_vendor%g
--s%@host_os@%$host_os%g
--s%@PACKAGE@%$PACKAGE%g
--s%@VERSION@%$VERSION%g
--s%@CC@%$CC%g
--s%@CPP@%$CPP%g
--s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
--s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
--s%@INSTALL_DATA@%$INSTALL_DATA%g
--s%@SET_MAKE@%$SET_MAKE%g
--s%@ed_PROGRAM@%$ed_PROGRAM%g
--s%@build@%$build%g
--s%@build_alias@%$build_alias%g
--s%@build_cpu@%$build_cpu%g
--s%@build_vendor@%$build_vendor%g
--s%@build_os@%$build_os%g
--s%@GETCONF@%$GETCONF%g
--s%@EXEEXT@%$EXEEXT%g
--s%@U@%$U%g
--s%@ANSI2KNR@%$ANSI2KNR%g
--s%@LIBOBJS@%$LIBOBJS%g
-
--CEOF
--EOF
-+# Name of the executable.
-+as_me=`$as_basename "$0" ||
-+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-+ X"$0" : 'X\(//\)$' \| \
-+ X"$0" : 'X\(/\)$' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X/"$0" |
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-+ /^X\/\(\/\/\)$/{ s//\1/; q; }
-+ /^X\/\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-
--cat >> $CONFIG_STATUS <<\EOF
-
--# Split the substitutions into bite-sized pieces for seds with
--# small command number limits, like on Digital OSF/1 and HP-UX.
--ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
--ac_file=1 # Number of current file.
--ac_beg=1 # First line for current file.
--ac_end=$ac_max_sed_cmds # Line after last line for current file.
--ac_more_lines=:
--ac_sed_cmds=""
--while $ac_more_lines; do
-- if test $ac_beg -gt 1; then
-- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-+# PATH needs CR, and LINENO needs CR and PATH.
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
- else
-- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-+ PATH_SEPARATOR=:
- fi
-- if test ! -s conftest.s$ac_file; then
-- ac_more_lines=false
-- rm -f conftest.s$ac_file
-+ rm -f conf$$.sh
-+fi
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" || {
-+ # Find who we are. Look in the path if we contain no path at all
-+ # relative or not.
-+ case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+
-+ ;;
-+ esac
-+ # We did not find ourselves, most probably we were run as `sh COMMAND'
-+ # in which case we are not to be found in the path.
-+ if test "x$as_myself" = x; then
-+ as_myself=$0
-+ fi
-+ if test ! -f "$as_myself"; then
-+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi
-+ case $CONFIG_SHELL in
-+ '')
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for as_base in sh bash ksh sh5; do
-+ case $as_dir in
-+ /*)
-+ if ("$as_dir/$as_base" -c '
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-+ CONFIG_SHELL=$as_dir/$as_base
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-+ fi;;
-+ esac
-+ done
-+done
-+;;
-+ esac
-+
-+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-+ # uniformly replaced by the line number. The first 'sed' inserts a
-+ # line-number line before each line; the second 'sed' does the real
-+ # work. The second script uses 'N' to pair each line-number line
-+ # with the numbered line, and appends trailing '-' during
-+ # substitution so that $LINENO is not a special case at line end.
-+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-+ sed '=' <$as_myself |
-+ sed '
-+ N
-+ s,$,-,
-+ : loop
-+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ t loop
-+ s,-$,,
-+ s,^['$as_cr_digits']*\n,,
-+ ' >$as_me.lineno &&
-+ chmod +x $as_me.lineno ||
-+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-+ # Don't try to exec as it changes $[0], causing all sort of problems
-+ # (the dirname of $[0] is not the place where we might find the
-+ # original and so on. Autoconf is especially sensible to this).
-+ . ./$as_me.lineno
-+ # Exit status is that of the last command.
-+ exit
-+}
-+
-+
-+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-+ *c*,-n*) ECHO_N= ECHO_C='
-+' ECHO_T=' ' ;;
-+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+esac
-+
-+if expr a : '\(a\)' >/dev/null 2>&1; then
-+ as_expr=expr
-+else
-+ as_expr=false
-+fi
-+
-+rm -f conf$$ conf$$.exe conf$$.file
-+echo >conf$$.file
-+if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ # We could just check for DJGPP; but this test a) works b) is more generic
-+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-+ if test -f conf$$.exe; then
-+ # Don't use ln at all; we don't have any links
-+ as_ln_s='cp -p'
- else
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds="sed -f conftest.s$ac_file"
-- else
-- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-- fi
-- ac_file=`expr $ac_file + 1`
-- ac_beg=$ac_end
-- ac_end=`expr $ac_end + $ac_max_sed_cmds`
-+ as_ln_s='ln -s'
- fi
-+elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+else
-+ as_ln_s='cp -p'
-+fi
-+rm -f conf$$ conf$$.exe conf$$.file
-+
-+if mkdir -p . 2>/dev/null; then
-+ as_mkdir_p=:
-+else
-+ as_mkdir_p=false
-+fi
-+
-+as_executable_p="test -f"
-+
-+# Sed expression to map a string onto a valid CPP name.
-+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-+
-+# Sed expression to map a string onto a valid variable name.
-+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-+
-+
-+# IFS
-+# We need space, tab and new line, in precisely that order.
-+as_nl='
-+'
-+IFS=" $as_nl"
-+
-+# CDPATH.
-+$as_unset CDPATH
-+
-+exec 6>&1
-+
-+# Open the log real soon, to keep \$[0] and so on meaningful, and to
-+# report actual input values of CONFIG_FILES etc. instead of their
-+# values after options handling. Logging --version etc. is OK.
-+exec 5>>config.log
-+{
-+ echo
-+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-+## Running $as_me. ##
-+_ASBOX
-+} >&5
-+cat >&5 <<_CSEOF
-+
-+This file was extended by patch $as_me 2.5.9, which was
-+generated by GNU Autoconf 2.57. Invocation command line was
-+
-+ CONFIG_FILES = $CONFIG_FILES
-+ CONFIG_HEADERS = $CONFIG_HEADERS
-+ CONFIG_LINKS = $CONFIG_LINKS
-+ CONFIG_COMMANDS = $CONFIG_COMMANDS
-+ $ $0 $@
-+
-+_CSEOF
-+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-+echo >&5
-+_ACEOF
-+
-+# Files that config.status was made for.
-+if test -n "$ac_config_files"; then
-+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-+fi
-+
-+if test -n "$ac_config_headers"; then
-+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-+fi
-+
-+if test -n "$ac_config_links"; then
-+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-+fi
-+
-+if test -n "$ac_config_commands"; then
-+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-+fi
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+ac_cs_usage="\
-+\`$as_me' instantiates files from templates according to the
-+current configuration.
-+
-+Usage: $0 [OPTIONS] [FILE]...
-+
-+ -h, --help print this help, then exit
-+ -V, --version print version number, then exit
-+ -q, --quiet do not print progress messages
-+ -d, --debug don't remove temporary files
-+ --recheck update $as_me by reconfiguring in the same conditions
-+ --file=FILE[:TEMPLATE]
-+ instantiate the configuration file FILE
-+ --header=FILE[:TEMPLATE]
-+ instantiate the configuration header FILE
-+
-+Configuration files:
-+$config_files
-+
-+Configuration headers:
-+$config_headers
-+
-+Report bugs to <bug-autoconf at gnu.org>."
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ac_cs_version="\\
-+patch config.status 2.5.9
-+configured by $0, generated by GNU Autoconf 2.57,
-+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-+
-+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-+Free Software Foundation, Inc.
-+This config.status script is free software; the Free Software Foundation
-+gives unlimited permission to copy, distribute and modify it."
-+srcdir=$srcdir
-+INSTALL="$INSTALL"
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If no file are specified by the user, then we need to provide default
-+# value. By we need to know if files were specified by the user.
-+ac_need_defaults=:
-+while test $# != 0
-+do
-+ case $1 in
-+ --*=*)
-+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
-+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-+ ac_shift=:
-+ ;;
-+ -*)
-+ ac_option=$1
-+ ac_optarg=$2
-+ ac_shift=shift
-+ ;;
-+ *) # This is not an option, so the user has probably given explicit
-+ # arguments.
-+ ac_option=$1
-+ ac_need_defaults=false;;
-+ esac
-+
-+ case $ac_option in
-+ # Handling of the options.
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-+ ac_cs_recheck=: ;;
-+ --version | --vers* | -V )
-+ echo "$ac_cs_version"; exit 0 ;;
-+ --he | --h)
-+ # Conflict between --help and --header
-+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
-+Try \`$0 --help' for more information." >&5
-+echo "$as_me: error: ambiguous option: $1
-+Try \`$0 --help' for more information." >&2;}
-+ { (exit 1); exit 1; }; };;
-+ --help | --hel | -h )
-+ echo "$ac_cs_usage"; exit 0 ;;
-+ --debug | --d* | -d )
-+ debug=: ;;
-+ --file | --fil | --fi | --f )
-+ $ac_shift
-+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-+ ac_need_defaults=false;;
-+ --header | --heade | --head | --hea )
-+ $ac_shift
-+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-+ ac_need_defaults=false;;
-+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
-+ ac_cs_silent=: ;;
-+
-+ # This is an error.
-+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&5
-+echo "$as_me: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&2;}
-+ { (exit 1); exit 1; }; } ;;
-+
-+ *) ac_config_targets="$ac_config_targets $1" ;;
-+
-+ esac
-+ shift
- done
--if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds=cat
-+
-+ac_configure_extra_args=
-+
-+if $ac_cs_silent; then
-+ exec 6>/dev/null
-+ ac_configure_extra_args="$ac_configure_extra_args --silent"
- fi
--EOF
-
--cat >> $CONFIG_STATUS <<EOF
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+if \$ac_cs_recheck; then
-+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+fi
-
--CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
--EOF
--cat >> $CONFIG_STATUS <<\EOF
--for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case "$ac_file" in
-- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-- *) ac_file_in="${ac_file}.in" ;;
-+_ACEOF
-+
-+
-+
-+
-+
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+for ac_config_target in $ac_config_targets
-+do
-+ case "$ac_config_target" in
-+ # Handling of arguments.
-+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-+ "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.hin" ;;
-+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-+ { (exit 1); exit 1; }; };;
- esac
-+done
-
-- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-+# If the user did not use the arguments to specify the items to instantiate,
-+# then the envvar interface is used. Set only those that are not.
-+# We use the long form for the default assignment because of an extremely
-+# bizarre bug on SunOS 4.1.3.
-+if $ac_need_defaults; then
-+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-+fi
-
-- # Remove last slash and all that follows it. Not all systems have dirname.
-- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-- # The file is in a subdirectory.
-- test ! -d "$ac_dir" && mkdir "$ac_dir"
-- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-- else
-- ac_dir_suffix= ac_dots=
-+# Have a temporary directory for convenience. Make it in the build tree
-+# simply because there is no reason to put it here, and in addition,
-+# creating and moving files from /tmp can sometimes cause problems.
-+# Create a temporary directory, and hook for its removal unless debugging.
-+$debug ||
-+{
-+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-+ trap '{ (exit 1); exit 1; }' 1 2 13 15
-+}
-+
-+# Create a (secure) tmp directory for tmp files.
-+
-+{
-+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-+ test -n "$tmp" && test -d "$tmp"
-+} ||
-+{
-+ tmp=./confstat$$-$RANDOM
-+ (umask 077 && mkdir $tmp)
-+} ||
-+{
-+ echo "$me: cannot create a temporary directory in ." >&2
-+ { (exit 1); exit 1; }
-+}
-+
-+_ACEOF
-+
-+cat >>$CONFIG_STATUS <<_ACEOF
-+
-+#
-+# CONFIG_FILES section.
-+#
-+
-+# No need to generate the scripts if there are no CONFIG_FILES.
-+# This happens for instance when ./config.status config.h
-+if test -n "\$CONFIG_FILES"; then
-+ # Protect against being on the right side of a sed subst in config.status.
-+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-+s, at SHELL@,$SHELL,;t t
-+s, at PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-+s, at PACKAGE_NAME@,$PACKAGE_NAME,;t t
-+s, at PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-+s, at PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-+s, at PACKAGE_STRING@,$PACKAGE_STRING,;t t
-+s, at PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-+s, at exec_prefix@,$exec_prefix,;t t
-+s, at prefix@,$prefix,;t t
-+s, at program_transform_name@,$program_transform_name,;t t
-+s, at bindir@,$bindir,;t t
-+s, at sbindir@,$sbindir,;t t
-+s, at libexecdir@,$libexecdir,;t t
-+s, at datadir@,$datadir,;t t
-+s, at sysconfdir@,$sysconfdir,;t t
-+s, at sharedstatedir@,$sharedstatedir,;t t
-+s, at localstatedir@,$localstatedir,;t t
-+s, at libdir@,$libdir,;t t
-+s, at includedir@,$includedir,;t t
-+s, at oldincludedir@,$oldincludedir,;t t
-+s, at infodir@,$infodir,;t t
-+s, at mandir@,$mandir,;t t
-+s, at build_alias@,$build_alias,;t t
-+s, at host_alias@,$host_alias,;t t
-+s, at target_alias@,$target_alias,;t t
-+s, at DEFS@,$DEFS,;t t
-+s, at ECHO_C@,$ECHO_C,;t t
-+s, at ECHO_N@,$ECHO_N,;t t
-+s, at ECHO_T@,$ECHO_T,;t t
-+s, at LIBS@,$LIBS,;t t
-+s, at CC@,$CC,;t t
-+s, at CFLAGS@,$CFLAGS,;t t
-+s, at LDFLAGS@,$LDFLAGS,;t t
-+s, at CPPFLAGS@,$CPPFLAGS,;t t
-+s, at ac_ct_CC@,$ac_ct_CC,;t t
-+s, at EXEEXT@,$EXEEXT,;t t
-+s, at OBJEXT@,$OBJEXT,;t t
-+s, at CPP@,$CPP,;t t
-+s, at INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-+s, at INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-+s, at INSTALL_DATA@,$INSTALL_DATA,;t t
-+s, at SET_MAKE@,$SET_MAKE,;t t
-+s, at ed_PROGRAM@,$ed_PROGRAM,;t t
-+s, at EGREP@,$EGREP,;t t
-+s, at STDBOOL_H@,$STDBOOL_H,;t t
-+s, at HAVE__BOOL@,$HAVE__BOOL,;t t
-+s, at LIBOBJS@,$LIBOBJS,;t t
-+s, at LTLIBOBJS@,$LTLIBOBJS,;t t
-+CEOF
-+
-+_ACEOF
-+
-+ cat >>$CONFIG_STATUS <<\_ACEOF
-+ # Split the substitutions into bite-sized pieces for seds with
-+ # small command number limits, like on Digital OSF/1 and HP-UX.
-+ ac_max_sed_lines=48
-+ ac_sed_frag=1 # Number of current file.
-+ ac_beg=1 # First line for current file.
-+ ac_end=$ac_max_sed_lines # Line after last line for current file.
-+ ac_more_lines=:
-+ ac_sed_cmds=
-+ while $ac_more_lines; do
-+ if test $ac_beg -gt 1; then
-+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-+ else
-+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-+ fi
-+ if test ! -s $tmp/subs.frag; then
-+ ac_more_lines=false
-+ else
-+ # The purpose of the label and of the branching condition is to
-+ # speed up the sed processing (if there are no `@' at all, there
-+ # is no need to browse any of the substitutions).
-+ # These are the two extra sed commands mentioned above.
-+ (echo ':t
-+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-+ if test -z "$ac_sed_cmds"; then
-+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-+ else
-+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-+ fi
-+ ac_sed_frag=`expr $ac_sed_frag + 1`
-+ ac_beg=$ac_end
-+ ac_end=`expr $ac_end + $ac_max_sed_lines`
-+ fi
-+ done
-+ if test -z "$ac_sed_cmds"; then
-+ ac_sed_cmds=cat
- fi
-+fi # test -n "$CONFIG_FILES"
-
-- case "$ac_given_srcdir" in
-- .) srcdir=.
-- if test -z "$ac_dots"; then top_srcdir=.
-- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-- *) # Relative path.
-- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-- top_srcdir="$ac_dots$ac_given_srcdir" ;;
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-+ case $ac_file in
-+ - | *:- | *:-:* ) # input from stdin
-+ cat >$tmp/stdin
-+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ * ) ac_file_in=$ac_file.in ;;
- esac
-
-- case "$ac_given_INSTALL" in
-- [/$]*) INSTALL="$ac_given_INSTALL" ;;
-- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-- esac
-+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_file" : 'X\(//\)[^/]' \| \
-+ X"$ac_file" : 'X\(//\)$' \| \
-+ X"$ac_file" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$ac_file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ { if $as_mkdir_p; then
-+ mkdir -p "$ac_dir"
-+ else
-+ as_dir="$ac_dir"
-+ as_dirs=
-+ while test ! -d "$as_dir"; do
-+ as_dirs="$as_dir $as_dirs"
-+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ done
-+ test ! -n "$as_dirs" || mkdir $as_dirs
-+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ { (exit 1); exit 1; }; }; }
-
-- echo creating "$ac_file"
-- rm -f "$ac_file"
-- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-- case "$ac_file" in
-- *Makefile*) ac_comsub="1i\\
--# $configure_input" ;;
-- *) ac_comsub= ;;
-+ ac_builddir=.
-+
-+if test "$ac_dir" != .; then
-+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ # A "../" for each directory in $ac_dir_suffix.
-+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-+else
-+ ac_dir_suffix= ac_top_builddir=
-+fi
-+
-+case $srcdir in
-+ .) # No --srcdir option. We are building in place.
-+ ac_srcdir=.
-+ if test -z "$ac_top_builddir"; then
-+ ac_top_srcdir=.
-+ else
-+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-+ fi ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_srcdir=$srcdir$ac_dir_suffix;
-+ ac_top_srcdir=$srcdir ;;
-+ *) # Relative path.
-+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
-+esac
-+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-+# absolute.
-+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
-+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-+
-+
-+ case $INSTALL in
-+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
-- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-- sed -e "$ac_comsub
--s%@configure_input@%$configure_input%g
--s%@srcdir@%$srcdir%g
--s%@top_srcdir@%$top_srcdir%g
--s%@INSTALL@%$INSTALL%g
--" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
--fi; done
--rm -f conftest.s*
-+ if test x"$ac_file" != x-; then
-+ { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+ rm -f "$ac_file"
-+ fi
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ if test x"$ac_file" = x-; then
-+ configure_input=
-+ else
-+ configure_input="$ac_file. "
-+ fi
-+ configure_input=$configure_input"Generated from `echo $ac_file_in |
-+ sed 's,.*/,,'` by configure."
-+
-+ # First look for the input files in the build tree, otherwise in the
-+ # src tree.
-+ ac_file_inputs=`IFS=:
-+ for f in $ac_file_in; do
-+ case $f in
-+ -) echo $tmp/stdin ;;
-+ [\\/$]*)
-+ # Absolute (can't be DOS-style, as IFS=:)
-+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ echo $f;;
-+ *) # Relative
-+ if test -f "$f"; then
-+ # Build tree
-+ echo $f
-+ elif test -f "$srcdir/$f"; then
-+ # Source tree
-+ echo $srcdir/$f
-+ else
-+ # /dev/null tree
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi;;
-+ esac
-+ done` || { (exit 1); exit 1; }
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+ sed "$ac_vpsub
-+$extrasub
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+:t
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-+s, at configure_input@,$configure_input,;t t
-+s, at srcdir@,$ac_srcdir,;t t
-+s, at abs_srcdir@,$ac_abs_srcdir,;t t
-+s, at top_srcdir@,$ac_top_srcdir,;t t
-+s, at abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-+s, at builddir@,$ac_builddir,;t t
-+s, at abs_builddir@,$ac_abs_builddir,;t t
-+s, at top_builddir@,$ac_top_builddir,;t t
-+s, at abs_top_builddir@,$ac_abs_top_builddir,;t t
-+s, at INSTALL@,$ac_INSTALL,;t t
-+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-+ rm -f $tmp/stdin
-+ if test x"$ac_file" != x-; then
-+ mv $tmp/out $ac_file
-+ else
-+ cat $tmp/out
-+ rm -f $tmp/out
-+ fi
-+
-+done
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+#
-+# CONFIG_HEADER section.
-+#
-
- # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
- # NAME is the cpp macro being defined and VALUE is the value it is being given.
- #
- # ac_d sets the value in "#define NAME VALUE" lines.
--ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
--ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
--ac_dC='\3'
--ac_dD='%g'
--# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
--ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
--ac_uB='\([ ]\)%\1#\2define\3'
-+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-+ac_dB='[ ].*$,\1#\2'
-+ac_dC=' '
-+ac_dD=',;t'
-+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-+ac_uB='$,\1#\2define\3'
- ac_uC=' '
--ac_uD='\4%g'
--# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
--ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
--ac_eB='$%\1#\2define\3'
--ac_eC=' '
--ac_eD='%g'
-+ac_uD=',;t'
-
--if test "${CONFIG_HEADERS+set}" != set; then
--EOF
--cat >> $CONFIG_STATUS <<EOF
-- CONFIG_HEADERS="config.h:config.hin"
--EOF
--cat >> $CONFIG_STATUS <<\EOF
--fi
--for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case "$ac_file" in
-- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-- *) ac_file_in="${ac_file}.in" ;;
-+ case $ac_file in
-+ - | *:- | *:-:* ) # input from stdin
-+ cat >$tmp/stdin
-+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-+ * ) ac_file_in=$ac_file.in ;;
- esac
-
-- echo creating $ac_file
-+ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-
-- rm -f conftest.frag conftest.in conftest.out
-- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-- cat $ac_file_inputs > conftest.in
-+ # First look for the input files in the build tree, otherwise in the
-+ # src tree.
-+ ac_file_inputs=`IFS=:
-+ for f in $ac_file_in; do
-+ case $f in
-+ -) echo $tmp/stdin ;;
-+ [\\/$]*)
-+ # Absolute (can't be DOS-style, as IFS=:)
-+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ echo $f;;
-+ *) # Relative
-+ if test -f "$f"; then
-+ # Build tree
-+ echo $f
-+ elif test -f "$srcdir/$f"; then
-+ # Source tree
-+ echo $srcdir/$f
-+ else
-+ # /dev/null tree
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-+echo "$as_me: error: cannot find input file: $f" >&2;}
-+ { (exit 1); exit 1; }; }
-+ fi;;
-+ esac
-+ done` || { (exit 1); exit 1; }
-+ # Remove the trailing spaces.
-+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
-
--EOF
-+_ACEOF
-
--# Transform confdefs.h into a sed script conftest.vals that substitutes
--# the proper values into config.h.in to produce config.h. And first:
--# Protect against being on the right side of a sed subst in config.status.
--# Protect against being in an unquoted here document in config.status.
--rm -f conftest.vals
--cat > conftest.hdr <<\EOF
--s/[\\&%]/\\&/g
--s%[\\$`]%\\&%g
--s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
--s%ac_d%ac_u%gp
--s%ac_u%ac_e%gp
--EOF
--sed -n -f conftest.hdr confdefs.h > conftest.vals
--rm -f conftest.hdr
-+# Transform confdefs.h into two sed scripts, `conftest.defines' and
-+# `conftest.undefs', that substitutes the proper values into
-+# config.h.in to produce config.h. The first handles `#define'
-+# templates, and the second `#undef' templates.
-+# And first: Protect against being on the right side of a sed subst in
-+# config.status. Protect against being in an unquoted here document
-+# in config.status.
-+rm -f conftest.defines conftest.undefs
-+# Using a here document instead of a string reduces the quoting nightmare.
-+# Putting comments in sed scripts is not portable.
-+#
-+# `end' is used to avoid that the second main sed command (meant for
-+# 0-ary CPP macros) applies to n-ary macro definitions.
-+# See the Autoconf documentation for `clear'.
-+cat >confdef2sed.sed <<\_ACEOF
-+s/[\\&,]/\\&/g
-+s,[\\$`],\\&,g
-+t clear
-+: clear
-+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-+t end
-+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-+: end
-+_ACEOF
-+# If some macros were called several times there might be several times
-+# the same #defines, which is useless. Nevertheless, we may not want to
-+# sort them, since we want the *last* AC-DEFINE to be honored.
-+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-+rm -f confdef2sed.sed
-
- # This sed command replaces #undef with comments. This is necessary, for
- # example, in the case of _POSIX_SOURCE, which is predefined and required
- # on some systems where configure will not decide to define it.
--cat >> conftest.vals <<\EOF
--s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
--EOF
-+cat >>conftest.undefs <<\_ACEOF
-+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-+_ACEOF
-
--# Break up conftest.vals because some shells have a limit on
--# the size of here documents, and old seds have small limits too.
-+# Break up conftest.defines because some shells have a limit on the size
-+# of here documents, and old seds have small limits too (100 cmds).
-+echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-+echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-+echo ' :' >>$CONFIG_STATUS
-+rm -f conftest.tail
-+while grep . conftest.defines >/dev/null
-+do
-+ # Write a limited-size here document to $tmp/defines.sed.
-+ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-+ # Speed up: don't consider the non `#define' lines.
-+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
-+ # Work around the forget-to-reset-the-flag bug.
-+ echo 't clr' >>$CONFIG_STATUS
-+ echo ': clr' >>$CONFIG_STATUS
-+ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
-+ echo 'CEOF
-+ sed -f $tmp/defines.sed $tmp/in >$tmp/out
-+ rm -f $tmp/in
-+ mv $tmp/out $tmp/in
-+' >>$CONFIG_STATUS
-+ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-+ rm -f conftest.defines
-+ mv conftest.tail conftest.defines
-+done
-+rm -f conftest.defines
-+echo ' fi # grep' >>$CONFIG_STATUS
-+echo >>$CONFIG_STATUS
-
-+# Break up conftest.undefs because some shells have a limit on the size
-+# of here documents, and old seds have small limits too (100 cmds).
-+echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
- rm -f conftest.tail
--while :
-+while grep . conftest.undefs >/dev/null
- do
-- ac_lines=`grep -c . conftest.vals`
-- # grep -c gives empty output for an empty file on some AIX systems.
-- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-- # Write a limited-size here document to conftest.frag.
-- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-+ # Write a limited-size here document to $tmp/undefs.sed.
-+ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-+ # Speed up: don't consider the non `#undef'
-+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
-+ # Work around the forget-to-reset-the-flag bug.
-+ echo 't clr' >>$CONFIG_STATUS
-+ echo ': clr' >>$CONFIG_STATUS
-+ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
- echo 'CEOF
-- sed -f conftest.frag conftest.in > conftest.out
-- rm -f conftest.in
-- mv conftest.out conftest.in
--' >> $CONFIG_STATUS
-- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-- rm -f conftest.vals
-- mv conftest.tail conftest.vals
-+ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-+ rm -f $tmp/in
-+ mv $tmp/out $tmp/in
-+' >>$CONFIG_STATUS
-+ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-+ rm -f conftest.undefs
-+ mv conftest.tail conftest.undefs
- done
--rm -f conftest.vals
-+rm -f conftest.undefs
-
--cat >> $CONFIG_STATUS <<\EOF
-- rm -f conftest.frag conftest.h
-- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
-- cat conftest.in >> conftest.h
-- rm -f conftest.in
-- if cmp -s $ac_file conftest.h 2>/dev/null; then
-- echo "$ac_file is unchanged"
-- rm -f conftest.h
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ if test x"$ac_file" = x-; then
-+ echo "/* Generated by configure. */" >$tmp/config.h
- else
-- # Remove last slash and all that follows it. Not all systems have dirname.
-- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-- # The file is in a subdirectory.
-- test ! -d "$ac_dir" && mkdir "$ac_dir"
-- fi
-- rm -f $ac_file
-- mv conftest.h $ac_file
-+ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
- fi
--fi; done
-+ cat $tmp/in >>$tmp/config.h
-+ rm -f $tmp/in
-+ if test x"$ac_file" != x-; then
-+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-+echo "$as_me: $ac_file is unchanged" >&6;}
-+ else
-+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_file" : 'X\(//\)[^/]' \| \
-+ X"$ac_file" : 'X\(//\)$' \| \
-+ X"$ac_file" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$ac_file" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ { if $as_mkdir_p; then
-+ mkdir -p "$ac_dir"
-+ else
-+ as_dir="$ac_dir"
-+ as_dirs=
-+ while test ! -d "$as_dir"; do
-+ as_dirs="$as_dir $as_dirs"
-+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_dir" : 'X\(//\)[^/]' \| \
-+ X"$as_dir" : 'X\(//\)$' \| \
-+ X"$as_dir" : 'X\(/\)' \| \
-+ . : '\(.\)' 2>/dev/null ||
-+echo X"$as_dir" |
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-+ /^X\(\/\/\)$/{ s//\1/; q; }
-+ /^X\(\/\).*/{ s//\1/; q; }
-+ s/.*/./; q'`
-+ done
-+ test ! -n "$as_dirs" || mkdir $as_dirs
-+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ { (exit 1); exit 1; }; }; }
-
--EOF
--cat >> $CONFIG_STATUS <<EOF
-+ rm -f $ac_file
-+ mv $tmp/config.h $ac_file
-+ fi
-+ else
-+ cat $tmp/config.h
-+ rm -f $tmp/config.h
-+ fi
-+done
-+_ACEOF
-
--EOF
--cat >> $CONFIG_STATUS <<\EOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-
--exit 0
--EOF
-+{ (exit 0); exit 0; }
-+_ACEOF
- chmod +x $CONFIG_STATUS
--rm -fr confdefs* $ac_clean_files
--test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-+ac_clean_files=$ac_clean_files_save
-+
-+
-+# configure is writing to config.log, and then calls config.status.
-+# config.status does its own redirection, appending to config.log.
-+# Unfortunately, on DOS this fails, as config.log is still kept open
-+# by configure, so config.status won't be able to write to it; its
-+# output is simply discarded. So we exec the FD to /dev/null,
-+# effectively closing config.log, so it can be properly (re)opened and
-+# appended to by config.status. When coming back to configure, we
-+# need to make the FD available again.
-+if test "$no_create" != yes; then
-+ ac_cs_success=:
-+ ac_config_status_args=
-+ test "$silent" = yes &&
-+ ac_config_status_args="$ac_config_status_args --quiet"
-+ exec 5>/dev/null
-+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-+ exec 5>>config.log
-+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-+ # would make configure fail if this is the last instruction.
-+ $ac_cs_success || { (exit 1); exit 1; }
-+fi
-
-diff -urNd -urNd patch-2.5.4/configure.ac patch-2.5.9/configure.ac
---- patch-2.5.4/configure.ac 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/configure.ac 2003-05-19 02:44:57.000000000 -0400
-@@ -0,0 +1,95 @@
-+# Configure `patch'.
-+
-+# Copyright (C) 1993, 1997, 1998, 1999, 2002, 2003 Free Software
-+# Foundation, Inc.
-+
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+# 02111-1307, USA.
-+
-+AC_PREREQ(2.57)
-+AC_INIT(patch, 2.5.9, bug-patch at gnu.org)
-+AC_CONFIG_SRCDIR(patch.c)
-+AC_CONFIG_HEADER(config.h:config.hin)
-+AC_ARG_PROGRAM
-+
-+AC_PROG_CC
-+AC_PROG_CPP
-+AC_PROG_INSTALL
-+AC_PROG_MAKE_SET
-+# Use ed_PROGRAM, not ED_PROGRAM,
-+# because <errno.h> reserves symbols starting with `E'.
-+AC_PATH_PROG(ed_PROGRAM, ed, ed)
-+
-+AC_GNU_SOURCE
-+AC_AIX
-+AC_MINIX
-+AC_PROG_CC_STDC
-+AC_ISC_POSIX
-+AC_SYS_LARGEFILE
-+AC_EXEEXT
-+
-+AC_C_PROTOTYPES
-+AC_C_CONST
-+
-+AC_HEADER_DIRENT
-+AC_HEADER_STDC
-+AC_CHECK_HEADERS(fcntl.h limits.h string.h unistd.h utime.h varargs.h)
-+
-+AC_TYPE_MODE_T
-+AC_TYPE_OFF_T
-+AC_TYPE_PID_T
-+AC_TYPE_SIGNAL
-+AC_TYPE_SIZE_T
-+AM_STDBOOL_H
-+jm_CHECK_TYPE_STRUCT_UTIMBUF
-+
-+gl_BACKUPFILE
-+gl_DIRNAME
-+gl_ERROR
-+gl_FUNC_MEMCHR
-+gl_FUNC_RMDIR
-+gl_GETOPT
-+gl_PREREQ_XMALLOC
-+gl_QUOTE
-+gl_QUOTEARG
-+
-+dnl This should be in gnulib, but isn't for some reason.
-+AC_DEFUN([jm_PREREQ_ADDEXT],
-+[
-+ dnl For addext.c.
-+ AC_REQUIRE([AC_SYS_LONG_FILE_NAMES])
-+ AC_CHECK_FUNCS(pathconf)
-+ AC_CHECK_HEADERS(limits.h string.h unistd.h)
-+])
-+jm_PREREQ_ADDEXT
-+
-+AC_CHECK_DECLS([free, getenv, malloc, mktemp])
-+AC_CHECK_FUNCS(_doprintf geteuid getuid isascii memcmp mktemp \
-+ pathconf raise sigaction sigprocmask sigsetmask strerror)
-+AC_REPLACE_FUNCS(mkdir strncasecmp)
-+AC_FUNC_FSEEKO
-+jm_FUNC_GLIBC_UNLOCKED_IO
-+jm_FUNC_MALLOC
-+jm_FUNC_REALLOC
-+AC_FUNC_CLOSEDIR_VOID
-+AC_FUNC_SETMODE_DOS
-+AC_FUNC_VPRINTF
-+PATCH_FUNC_MKDIR_TAKES_ONE_ARG
-+
-+jm_AC_DOS
-+AC_SYS_LONG_FILE_NAMES
-+
-+AC_CONFIG_FILES([Makefile])
-+AC_OUTPUT
-diff -urNd -urNd patch-2.5.4/configure.in patch-2.5.9/configure.in
---- patch-2.5.4/configure.in 1999-08-30 02:20:08.000000000 -0400
-+++ patch-2.5.9/configure.in 1969-12-31 19:00:00.000000000 -0500
-@@ -1,59 +0,0 @@
--# Configure `patch'.
--# Copyright 1993, 1997-1998, 1999 Free Software Foundation, Inc.
--dnl Process this file with autoconf to produce a configure script.
--
--AC_PREREQ(2.12)
--AC_INIT(patch.c)
--AC_CONFIG_HEADER(config.h:config.hin)
--AC_ARG_PROGRAM
--AC_CANONICAL_HOST
--
--PACKAGE=patch
--VERSION=2.5.4
--AC_SUBST(PACKAGE)
--AC_SUBST(VERSION)
--
--AC_PROG_CC
--AC_PROG_CPP
--AC_PROG_INSTALL
--AC_PROG_MAKE_SET
--# Use ed_PROGRAM, not ED_PROGRAM,
--# because <errno.h> reserves symbols starting with `E'.
--AC_PATH_PROG(ed_PROGRAM, ed, ed)
--
--AC_SYS_LARGEFILE
--
--AC_AIX
--AC_MINIX
--AC_ISC_POSIX
--AC_EXEEXT
--
--AM_C_PROTOTYPES
--AC_C_CONST
--
--AC_HEADER_DIRENT
--AC_HEADER_STDC
--AC_CHECK_HEADERS(fcntl.h limits.h string.h unistd.h utime.h varargs.h)
--jm_AC_HEADER_INTTYPES_H
--
--AC_TYPE_MODE_T
--AC_TYPE_OFF_T
--AC_TYPE_PID_T
--AC_TYPE_SIGNAL
--AC_TYPE_SIZE_T
--jm_STRUCT_UTIMBUF
--
--AC_CHECK_FUNC(getopt_long, , [LIBOBJS="$LIBOBJS getopt1\$U.o getopt\$U.o"])
--AC_SUBST(LIBOBJS)
--AC_CHECK_FUNCS(_doprintf isascii fseeko memcmp mktemp \
-- pathconf raise setmode sigaction sigprocmask sigsetmask strerror)
--AC_REPLACE_FUNCS(memchr mkdir rename rmdir)
--jm_FUNC_MALLOC
--jm_FUNC_REALLOC
--AC_FUNC_CLOSEDIR_VOID
--AC_FUNC_VPRINTF
--
--AC_SYS_LONG_FILE_NAMES
--jm_STRUCT_DIRENT_D_INO
--
--AC_OUTPUT(Makefile)
-diff -urNd -urNd patch-2.5.4/COPYING patch-2.5.9/COPYING
---- patch-2.5.4/COPYING 1998-02-28 20:21:09.000000000 -0500
-+++ patch-2.5.9/COPYING 1999-02-10 00:47:30.000000000 -0500
-@@ -2,7 +2,7 @@
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-@@ -291,7 +291,7 @@
- the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
-- Copyright (C) 19yy <name of author>
-+ Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -313,7 +313,7 @@
- If the program is interactive, make it output a short notice like this
- when it starts in an interactive mode:
-
-- Gnomovision version 69, Copyright (C) 19yy name of author
-+ Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-diff -urNd -urNd patch-2.5.4/debian.patch patch-2.5.9/debian.patch
-diff -urNd -urNd patch-2.5.4/dirname.c patch-2.5.9/dirname.c
---- patch-2.5.4/dirname.c 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/dirname.c 2003-04-05 01:49:44.000000000 -0500
-@@ -0,0 +1,121 @@
-+/* dirname.c -- return all but the last element in a path
-+ Copyright 1990, 1998, 2000, 2001, 2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software Foundation,
-+ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+#if HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#if STDC_HEADERS || HAVE_STRING_H
-+# include <string.h>
-+#endif
-+
-+#include "dirname.h"
-+#include "xalloc.h"
-+
-+/* Return the length of `dirname (PATH)', or zero if PATH is
-+ in the working directory. Works properly even if
-+ there are trailing slashes (by effectively ignoring them). */
-+size_t
-+dir_len (char const *path)
-+{
-+ size_t prefix_length = FILESYSTEM_PREFIX_LEN (path);
-+ size_t length;
-+
-+ /* Strip the basename and any redundant slashes before it. */
-+ for (length = base_name (path) - path; prefix_length < length; length--)
-+ if (! ISSLASH (path[length - 1]))
-+ return length;
-+
-+ /* But don't strip the only slash from "/". */
-+ return prefix_length + ISSLASH (path[prefix_length]);
-+}
-+
-+/* Return the leading directories part of PATH,
-+ allocated with xmalloc.
-+ Works properly even if there are trailing slashes
-+ (by effectively ignoring them). */
-+
-+char *
-+dir_name (char const *path)
-+{
-+ size_t length = dir_len (path);
-+ int append_dot = (length == FILESYSTEM_PREFIX_LEN (path));
-+ char *newpath = xmalloc (length + append_dot + 1);
-+ memcpy (newpath, path, length);
-+ if (append_dot)
-+ newpath[length++] = '.';
-+ newpath[length] = 0;
-+ return newpath;
-+}
-+
-+#ifdef TEST_DIRNAME
-+/*
-+
-+Run the test like this (expect no output):
-+ gcc -DHAVE_CONFIG_H -DTEST_DIRNAME -I.. -O -Wall \
-+ basename.c dirname.c xmalloc.c error.c
-+ sed -n '/^BEGIN-DATA$/,/^END-DATA$/p' dirname.c|grep -v DATA|./a.out
-+
-+If it's been built on a DOS or Windows platforms, run another test like
-+this (again, expect no output):
-+ sed -n '/^BEGIN-DOS-DATA$/,/^END-DOS-DATA$/p' dirname.c|grep -v DATA|./a.out
-+
-+BEGIN-DATA
-+foo//// .
-+bar/foo//// bar
-+foo/ .
-+/ /
-+. .
-+a .
-+END-DATA
-+
-+BEGIN-DOS-DATA
-+c:///// c:/
-+c:/ c:/
-+c:/. c:/
-+c:foo c:.
-+c:foo/bar c:foo
-+END-DOS-DATA
-+
-+*/
-+
-+# define MAX_BUFF_LEN 1024
-+# include <stdio.h>
-+
-+char *program_name;
-+
-+int
-+main (int argc, char *argv[])
-+{
-+ char buff[MAX_BUFF_LEN + 1];
-+
-+ program_name = argv[0];
-+
-+ buff[MAX_BUFF_LEN] = 0;
-+ while (fgets (buff, MAX_BUFF_LEN, stdin) && buff[0])
-+ {
-+ char path[MAX_BUFF_LEN];
-+ char expected_result[MAX_BUFF_LEN];
-+ char const *result;
-+ sscanf (buff, "%s %s", path, expected_result);
-+ result = dir_name (path);
-+ if (strcmp (result, expected_result))
-+ printf ("%s: got %s, expected %s\n", path, result, expected_result);
-+ }
-+ return 0;
-+}
-+#endif
-diff -urNd -urNd patch-2.5.4/dirname.h patch-2.5.9/dirname.h
---- patch-2.5.4/dirname.h 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/dirname.h 2001-05-12 11:46:36.000000000 -0400
-@@ -0,0 +1,47 @@
-+/* Copyright (C) 1998, 2001 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software Foundation,
-+ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+#ifndef DIRNAME_H_
-+# define DIRNAME_H_ 1
-+
-+# ifndef PARAMS
-+# if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-+# define PARAMS(Args) Args
-+# else
-+# define PARAMS(Args) ()
-+# endif
-+# endif
-+
-+# ifndef DIRECTORY_SEPARATOR
-+# define DIRECTORY_SEPARATOR '/'
-+# endif
-+
-+# ifndef ISSLASH
-+# define ISSLASH(C) ((C) == DIRECTORY_SEPARATOR)
-+# endif
-+
-+# ifndef FILESYSTEM_PREFIX_LEN
-+# define FILESYSTEM_PREFIX_LEN(Filename) 0
-+# endif
-+
-+char *base_name PARAMS ((char const *path));
-+char *dir_name PARAMS ((char const *path));
-+size_t base_len PARAMS ((char const *path));
-+size_t dir_len PARAMS ((char const *path));
-+
-+int strip_trailing_slashes PARAMS ((char *path));
-+
-+#endif /* not DIRNAME_H_ */
-diff -urNd -urNd patch-2.5.4/error.c patch-2.5.9/error.c
---- patch-2.5.4/error.c 1998-11-15 12:35:34.000000000 -0500
-+++ patch-2.5.9/error.c 2002-12-06 03:08:13.000000000 -0500
-@@ -1,23 +1,18 @@
- /* Error handler for noninteractive utilities
-- Copyright (C) 1990,91,92,93,94,95,96,97,98 Free Software Foundation, Inc.
--
-- This file is part of the GNU C Library. Its master source is NOT part of
-- the C library, however. The master source lives in /gd/gnu/lib.
--
-- The GNU C Library is free software; you can redistribute it and/or
-- modify it under the terms of the GNU Library General Public License as
-- published by the Free Software Foundation; either version 2 of the
-- License, or (at your option) any later version.
-+ Copyright (C) 1990-1998, 2000, 2001, 2002 Free Software Foundation, Inc.
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-
-- The GNU C Library is distributed in the hope that it will be useful,
-+ This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-- Library General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-
-- You should have received a copy of the GNU Library General Public
-- License along with the GNU C Library; see the file COPYING.LIB. If not,
-- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-- Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation,
-+ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
- /* Written by David MacKenzie <djm at gnu.ai.mit.edu>. */
-
-@@ -27,6 +22,17 @@
-
- #include <stdio.h>
-
-+#ifdef _LIBC
-+# include <libintl.h>
-+#else
-+# include "gettext.h"
-+#endif
-+
-+#ifdef _LIBC
-+# include <wchar.h>
-+# define mbsrtowcs __mbsrtowcs
-+#endif
-+
- #if HAVE_VPRINTF || HAVE_DOPRNT || _LIBC
- # if __STDC__
- # include <stdarg.h>
-@@ -49,6 +55,10 @@
-
- #include "error.h"
-
-+#if !_LIBC
-+# include "unlocked-io.h"
-+#endif
-+
- #ifndef _
- # define _(String) String
- #endif
-@@ -70,29 +80,52 @@
-
- # define program_name program_invocation_name
- # include <errno.h>
-+# include <libio/libioP.h>
-
- /* In GNU libc we want do not want to use the common name `error' directly.
- Instead make it a weak alias. */
-+extern void __error (int status, int errnum, const char *message, ...)
-+ __attribute__ ((__format__ (__printf__, 3, 4)));
-+extern void __error_at_line (int status, int errnum, const char *file_name,
-+ unsigned int line_number, const char *message,
-+ ...)
-+ __attribute__ ((__format__ (__printf__, 5, 6)));;
- # define error __error
- # define error_at_line __error_at_line
-
-+# ifdef USE_IN_LIBIO
-+# include <libio/iolibio.h>
-+# define fflush(s) INTUSE(_IO_fflush) (s)
-+# undef putc
-+# define putc(c, fp) INTUSE(_IO_putc) (c, fp)
-+# endif
-+
- #else /* not _LIBC */
-
-+# if !HAVE_DECL_STRERROR_R && STRERROR_R_CHAR_P
-+# ifndef HAVE_DECL_STRERROR_R
-+"this configure-time declaration test was not run"
-+# endif
-+char *strerror_r ();
-+# endif
-+
- /* The calling program should define program_name and set it to the
- name of the executing program. */
- extern char *program_name;
-
--# ifdef HAVE_STRERROR_R
-+# if HAVE_STRERROR_R || defined strerror_r
- # define __strerror_r strerror_r
- # else
- # if HAVE_STRERROR
--# ifndef strerror /* On some systems, strerror is a macro */
-+# ifndef HAVE_DECL_STRERROR
-+"this configure-time declaration test was not run"
-+# endif
-+# if !HAVE_DECL_STRERROR
- char *strerror ();
- # endif
- # else
- static char *
--private_strerror (errnum)
-- int errnum;
-+private_strerror (int errnum)
- {
- extern char *sys_errlist[];
- extern int sys_nerr;
-@@ -103,15 +136,118 @@
- }
- # define strerror private_strerror
- # endif /* HAVE_STRERROR */
--# endif /* HAVE_STRERROR_R */
-+# endif /* HAVE_STRERROR_R || defined strerror_r */
- #endif /* not _LIBC */
-
-+static void
-+print_errno_message (int errnum)
-+{
-+ char const *s;
-+
-+#if defined HAVE_STRERROR_R || _LIBC
-+ char errbuf[1024];
-+# if STRERROR_R_CHAR_P || _LIBC
-+ s = __strerror_r (errnum, errbuf, sizeof errbuf);
-+# else
-+ if (__strerror_r (errnum, errbuf, sizeof errbuf) == 0)
-+ s = errbuf;
-+ else
-+ s = 0;
-+# endif
-+#else
-+ s = strerror (errnum);
-+#endif
-+
-+#if !_LIBC
-+ if (! s)
-+ s = _("Unknown system error");
-+#endif
-+
-+#if _LIBC && USE_IN_LIBIO
-+ if (_IO_fwide (stderr, 0) > 0)
-+ {
-+ __fwprintf (stderr, L": %s", s);
-+ return;
-+ }
-+#endif
-+
-+ fprintf (stderr, ": %s", s);
-+}
-+
-+#ifdef VA_START
-+static void
-+error_tail (int status, int errnum, const char *message, va_list args)
-+{
-+# if HAVE_VPRINTF || _LIBC
-+# if _LIBC && USE_IN_LIBIO
-+ if (_IO_fwide (stderr, 0) > 0)
-+ {
-+# define ALLOCA_LIMIT 2000
-+ size_t len = strlen (message) + 1;
-+ wchar_t *wmessage = NULL;
-+ mbstate_t st;
-+ size_t res;
-+ const char *tmp;
-+
-+ do
-+ {
-+ if (len < ALLOCA_LIMIT)
-+ wmessage = (wchar_t *) alloca (len * sizeof (wchar_t));
-+ else
-+ {
-+ if (wmessage != NULL && len / 2 < ALLOCA_LIMIT)
-+ wmessage = NULL;
-+
-+ wmessage = (wchar_t *) realloc (wmessage,
-+ len * sizeof (wchar_t));
-+
-+ if (wmessage == NULL)
-+ {
-+ fputws_unlocked (L"out of memory\n", stderr);
-+ return;
-+ }
-+ }
-+
-+ memset (&st, '\0', sizeof (st));
-+ tmp =message;
-+ }
-+ while ((res = mbsrtowcs (wmessage, &tmp, len, &st)) == len);
-+
-+ if (res == (size_t) -1)
-+ /* The string cannot be converted. */
-+ wmessage = (wchar_t *) L"???";
-+
-+ __vfwprintf (stderr, wmessage, args);
-+ }
-+ else
-+# endif
-+ vfprintf (stderr, message, args);
-+# else
-+ _doprnt (message, args, stderr);
-+# endif
-+ va_end (args);
-+
-+ ++error_message_count;
-+ if (errnum)
-+ print_errno_message (errnum);
-+# if _LIBC && USE_IN_LIBIO
-+ if (_IO_fwide (stderr, 0) > 0)
-+ putwc (L'\n', stderr);
-+ else
-+# endif
-+ putc ('\n', stderr);
-+ fflush (stderr);
-+ if (status)
-+ exit (status);
-+}
-+#endif
-+
-+
- /* Print the program name and error message MESSAGE, which is a printf-style
- format string with optional args.
- If ERRNUM is nonzero, print its corresponding system error message.
- Exit with status STATUS if it is nonzero. */
- /* VARARGS */
--
- void
- #if defined VA_START && __STDC__
- error (int status, int errnum, const char *message, ...)
-@@ -127,43 +263,48 @@
- va_list args;
- #endif
-
-+ fflush (stdout);
-+#ifdef _LIBC
-+# ifdef USE_IN_LIBIO
-+ _IO_flockfile (stderr);
-+# else
-+ __flockfile (stderr);
-+# endif
-+#endif
- if (error_print_progname)
- (*error_print_progname) ();
- else
- {
-- fflush (stdout);
-- fprintf (stderr, "%s: ", program_name);
-+#if _LIBC && USE_IN_LIBIO
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s: ", program_name);
-+ else
-+#endif
-+ fprintf (stderr, "%s: ", program_name);
- }
-
- #ifdef VA_START
- VA_START (args, message);
--# if HAVE_VPRINTF || _LIBC
-- vfprintf (stderr, message, args);
--# else
-- _doprnt (message, args, stderr);
--# endif
-- va_end (args);
-+ error_tail (status, errnum, message, args);
- #else
- fprintf (stderr, message, a1, a2, a3, a4, a5, a6, a7, a8);
--#endif
-
- ++error_message_count;
- if (errnum)
-- {
--#if defined HAVE_STRERROR_R || defined _LIBC
-- char errbuf[1024];
-- /* Don't use __strerror_r's return value because on some systems
-- (at least DEC UNIX 4.0[A-D]) strerror_r returns `int'. */
-- __strerror_r (errnum, errbuf, sizeof errbuf);
-- fprintf (stderr, ": %s", errbuf);
--#else
-- fprintf (stderr, ": %s", strerror (errnum));
--#endif
-- }
-+ print_errno_message (errnum);
- putc ('\n', stderr);
- fflush (stderr);
- if (status)
- exit (status);
-+#endif
-+
-+#ifdef _LIBC
-+# ifdef USE_IN_LIBIO
-+ _IO_funlockfile (stderr);
-+# else
-+ __funlockfile (stderr);
-+# endif
-+#endif
- }
-
- /* Sometimes we want to have at most one error per line. This
-@@ -193,8 +334,9 @@
- static const char *old_file_name;
- static unsigned int old_line_number;
-
-- if (old_line_number == line_number &&
-- (file_name == old_file_name || !strcmp (old_file_name, file_name)))
-+ if (old_line_number == line_number
-+ && (file_name == old_file_name
-+ || strcmp (old_file_name, file_name) == 0))
- /* Simply return and print nothing. */
- return;
-
-@@ -202,43 +344,58 @@
- old_line_number = line_number;
- }
-
-+ fflush (stdout);
-+#ifdef _LIBC
-+# ifdef USE_IN_LIBIO
-+ _IO_flockfile (stderr);
-+# else
-+ __flockfile (stderr);
-+# endif
-+#endif
- if (error_print_progname)
- (*error_print_progname) ();
- else
- {
-- fflush (stdout);
-- fprintf (stderr, "%s:", program_name);
-+#if _LIBC && USE_IN_LIBIO
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s: ", program_name);
-+ else
-+#endif
-+ fprintf (stderr, "%s:", program_name);
- }
-
- if (file_name != NULL)
-- fprintf (stderr, "%s:%d: ", file_name, line_number);
-+ {
-+#if _LIBC && USE_IN_LIBIO
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s:%d: ", file_name, line_number);
-+ else
-+#endif
-+ fprintf (stderr, "%s:%d: ", file_name, line_number);
-+ }
-
- #ifdef VA_START
- VA_START (args, message);
--# if HAVE_VPRINTF || _LIBC
-- vfprintf (stderr, message, args);
--# else
-- _doprnt (message, args, stderr);
--# endif
-- va_end (args);
-+ error_tail (status, errnum, message, args);
- #else
- fprintf (stderr, message, a1, a2, a3, a4, a5, a6, a7, a8);
--#endif
-
- ++error_message_count;
- if (errnum)
-- {
--#if defined HAVE_STRERROR_R || defined _LIBC
-- char errbuf[1024];
-- fprintf (stderr, ": %s", __strerror_r (errnum, errbuf, sizeof errbuf));
--#else
-- fprintf (stderr, ": %s", strerror (errnum));
--#endif
-- }
-+ print_errno_message (errnum);
- putc ('\n', stderr);
- fflush (stderr);
- if (status)
- exit (status);
-+#endif
-+
-+#ifdef _LIBC
-+# ifdef USE_IN_LIBIO
-+ _IO_funlockfile (stderr);
-+# else
-+ __funlockfile (stderr);
-+# endif
-+#endif
- }
-
- #ifdef _LIBC
-diff -urNd -urNd patch-2.5.4/error.h patch-2.5.9/error.h
---- patch-2.5.4/error.h 1997-06-21 00:29:28.000000000 -0400
-+++ patch-2.5.9/error.h 2001-08-23 13:25:08.000000000 -0400
-@@ -25,7 +25,7 @@
-
- #ifndef __attribute__
- /* This feature is available in gcc versions 2.5 and later. */
--# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 5) || __STRICT_ANSI__
-+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 5)
- # define __attribute__(Spec) /* empty */
- # endif
- /* The __-protected variants of `format' and `printf' attributes
-diff -urNd -urNd patch-2.5.4/getopt1.c patch-2.5.9/getopt1.c
---- patch-2.5.4/getopt1.c 1999-01-13 00:36:45.000000000 -0500
-+++ patch-2.5.9/getopt1.c 2002-11-24 19:17:33.000000000 -0500
-@@ -3,26 +3,29 @@
- Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
-- The GNU C Library is free software; you can redistribute it and/or
-- modify it under the terms of the GNU Library General Public License as
-- published by the Free Software Foundation; either version 2 of the
-- License, or (at your option) any later version.
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-
-- The GNU C Library is distributed in the hope that it will be useful,
-+ This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-- Library General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-
-- You should have received a copy of the GNU Library General Public
-- License along with the GNU C Library; see the file COPYING.LIB. If not,
-- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-- Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation,
-+ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
- #ifdef HAVE_CONFIG_H
- #include <config.h>
- #endif
-
--#include "getopt.h"
-+#ifdef _LIBC
-+# include <getopt.h>
-+#else
-+# include "getopt.h"
-+#endif
-
- #if !defined __STDC__ || !__STDC__
- /* This is a separate conditional since some stdc systems
-@@ -90,6 +93,10 @@
- return _getopt_internal (argc, argv, options, long_options, opt_index, 1);
- }
-
-+# ifdef _LIBC
-+libc_hidden_def (getopt_long)
-+libc_hidden_def (getopt_long_only)
-+# endif
-
- #endif /* Not ELIDE_CODE. */
-
-diff -urNd -urNd patch-2.5.4/getopt.c patch-2.5.9/getopt.c
---- patch-2.5.4/getopt.c 1999-01-13 00:36:45.000000000 -0500
-+++ patch-2.5.9/getopt.c 2002-11-24 19:17:33.000000000 -0500
-@@ -2,24 +2,23 @@
- NOTE: getopt is now part of the C library, so if you don't know what
- "Keep this file name-space clean" means, talk to drepper at gnu.org
- before changing it!
--
-- Copyright (C) 1987, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98
-+ Copyright (C) 1987,88,89,90,91,92,93,94,95,96,98,99,2000,2001,2002
- Free Software Foundation, Inc.
-+ This file is part of the GNU C Library.
-
-- The GNU C Library is free software; you can redistribute it and/or
-- modify it under the terms of the GNU Library General Public License as
-- published by the Free Software Foundation; either version 2 of the
-- License, or (at your option) any later version.
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-
-- The GNU C Library is distributed in the hope that it will be useful,
-+ This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-- Library General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-
-- You should have received a copy of the GNU Library General Public
-- License along with the GNU C Library; see the file COPYING.LIB. If not,
-- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-- Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation,
-+ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
- /* This tells Alpha OSF/1 not to define a getopt prototype in <stdio.h>.
- Ditto for AIX 3.2 and <stdlib.h>. */
-@@ -76,15 +75,20 @@
- # endif
- #endif
-
--#ifndef _
--/* This is for other GNU distributions with internationalized messages.
-- When compiling libc, the _ macro is predefined. */
--# ifdef HAVE_LIBINTL_H
--# include <libintl.h>
--# define _(msgid) gettext (msgid)
--# else
--# define _(msgid) (msgid)
--# endif
-+#ifdef _LIBC
-+# include <libintl.h>
-+#else
-+/* This is for other GNU distributions with internationalized messages. */
-+# include "gettext.h"
-+#endif
-+#define _(msgid) gettext (msgid)
-+
-+#if defined _LIBC && defined USE_IN_LIBIO
-+# include <wchar.h>
-+#endif
-+
-+#ifndef attribute_hidden
-+# define attribute_hidden
- #endif
-
- /* This version of `getopt' appears to the caller like standard Unix `getopt'
-@@ -109,7 +113,7 @@
- Also, when `ordering' is RETURN_IN_ORDER,
- each non-option ARGV-element is returned here. */
-
--char *optarg = NULL;
-+char *optarg;
-
- /* Index in ARGV of the next element to be scanned.
- This is used for communication to and from the caller
-@@ -130,7 +134,7 @@
- causes problems with re-calling getopt as programs generally don't
- know that. */
-
--int __getopt_initialized = 0;
-+int __getopt_initialized attribute_hidden;
-
- /* The next char to be scanned in the option-element
- in which the last option character we returned was found.
-@@ -249,41 +253,34 @@
- static int last_nonopt;
-
- #ifdef _LIBC
-+/* Stored original parameters.
-+ XXX This is no good solution. We should rather copy the args so
-+ that we can compare them later. But we must not use malloc(3). */
-+extern int __libc_argc;
-+extern char **__libc_argv;
-+
- /* Bash 2.0 gives us an environment variable containing flags
- indicating ARGV elements that should not be considered arguments. */
-
-+# ifdef USE_NONOPTION_FLAGS
- /* Defined in getopt_init.c */
- extern char *__getopt_nonoption_flags;
-
- static int nonoption_flags_max_len;
- static int nonoption_flags_len;
-+# endif
-
--static int original_argc;
--static char *const *original_argv;
--
--/* Make sure the environment variable bash 2.0 puts in the environment
-- is valid for the getopt call we must make sure that the ARGV passed
-- to getopt is that one passed to the process. */
--static void
--__attribute__ ((unused))
--store_args_and_env (int argc, char *const *argv)
--{
-- /* XXX This is no good solution. We should rather copy the args so
-- that we can compare them later. But we must not use malloc(3). */
-- original_argc = argc;
-- original_argv = argv;
--}
--# ifdef text_set_element
--text_set_element (__libc_subinit, store_args_and_env);
--# endif /* text_set_element */
--
--# define SWAP_FLAGS(ch1, ch2) \
-+# ifdef USE_NONOPTION_FLAGS
-+# define SWAP_FLAGS(ch1, ch2) \
- if (nonoption_flags_len > 0) \
- { \
- char __tmp = __getopt_nonoption_flags[ch1]; \
- __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2]; \
- __getopt_nonoption_flags[ch2] = __tmp; \
- }
-+# else
-+# define SWAP_FLAGS(ch1, ch2)
-+# endif
- #else /* !_LIBC */
- # define SWAP_FLAGS(ch1, ch2)
- #endif /* _LIBC */
-@@ -315,7 +312,7 @@
- It leaves the longer segment in the right place overall,
- but it consists of two parts that need to be swapped next. */
-
--#ifdef _LIBC
-+#if defined _LIBC && defined USE_NONOPTION_FLAGS
- /* First make sure the handling of the `__getopt_nonoption_flags'
- string can work normally. Our top argument must be in the range
- of the string. */
-@@ -419,9 +416,9 @@
- else
- ordering = PERMUTE;
-
--#ifdef _LIBC
-+#if defined _LIBC && defined USE_NONOPTION_FLAGS
- if (posixly_correct == NULL
-- && argc == original_argc && argv == original_argv)
-+ && argc == __libc_argc && argv == __libc_argv)
- {
- if (nonoption_flags_max_len == 0)
- {
-@@ -517,6 +514,13 @@
- int *longind;
- int long_only;
- {
-+ int print_errors = opterr;
-+ if (optstring[0] == ':')
-+ print_errors = 0;
-+
-+ if (argc < 1)
-+ return -1;
-+
- optarg = NULL;
-
- if (optind == 0 || !__getopt_initialized)
-@@ -531,7 +535,7 @@
- Either it does not have option syntax, or there is an environment flag
- from the shell indicating it is not an option. The later information
- is only used when the used in the GNU libc. */
--#ifdef _LIBC
-+#if defined _LIBC && defined USE_NONOPTION_FLAGS
- # define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0' \
- || (optind < nonoption_flags_len \
- && __getopt_nonoption_flags[optind] == '1'))
-@@ -666,16 +670,37 @@
- pfound = p;
- indfound = option_index;
- }
-- else
-+ else if (long_only
-+ || pfound->has_arg != p->has_arg
-+ || pfound->flag != p->flag
-+ || pfound->val != p->val)
- /* Second or later nonexact match found. */
- ambig = 1;
- }
-
- if (ambig && !exact)
- {
-- if (opterr)
-- fprintf (stderr, _("%s: option `%s' is ambiguous\n"),
-- argv[0], argv[optind]);
-+ if (print_errors)
-+ {
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ char *buf;
-+
-+ if (__asprintf (&buf, _("%s: option `%s' is ambiguous\n"),
-+ argv[0], argv[optind]) >= 0)
-+ {
-+
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s", buf);
-+ else
-+ fputs (buf, stderr);
-+
-+ free (buf);
-+ }
-+#else
-+ fprintf (stderr, _("%s: option `%s' is ambiguous\n"),
-+ argv[0], argv[optind]);
-+#endif
-+ }
- nextchar += strlen (nextchar);
- optind++;
- optopt = 0;
-@@ -694,18 +719,52 @@
- optarg = nameend + 1;
- else
- {
-- if (opterr)
-+ if (print_errors)
- {
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ char *buf;
-+ int n;
-+#endif
-+
- if (argv[optind - 1][1] == '-')
-- /* --option */
-- fprintf (stderr,
-- _("%s: option `--%s' doesn't allow an argument\n"),
-- argv[0], pfound->name);
-+ {
-+ /* --option */
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ n = __asprintf (&buf, _("\
-+%s: option `--%s' doesn't allow an argument\n"),
-+ argv[0], pfound->name);
-+#else
-+ fprintf (stderr, _("\
-+%s: option `--%s' doesn't allow an argument\n"),
-+ argv[0], pfound->name);
-+#endif
-+ }
- else
-- /* +option or -option */
-- fprintf (stderr,
-- _("%s: option `%c%s' doesn't allow an argument\n"),
-- argv[0], argv[optind - 1][0], pfound->name);
-+ {
-+ /* +option or -option */
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ n = __asprintf (&buf, _("\
-+%s: option `%c%s' doesn't allow an argument\n"),
-+ argv[0], argv[optind - 1][0],
-+ pfound->name);
-+#else
-+ fprintf (stderr, _("\
-+%s: option `%c%s' doesn't allow an argument\n"),
-+ argv[0], argv[optind - 1][0], pfound->name);
-+#endif
-+ }
-+
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ if (n >= 0)
-+ {
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s", buf);
-+ else
-+ fputs (buf, stderr);
-+
-+ free (buf);
-+ }
-+#endif
- }
-
- nextchar += strlen (nextchar);
-@@ -720,10 +779,28 @@
- optarg = argv[optind++];
- else
- {
-- if (opterr)
-- fprintf (stderr,
-- _("%s: option `%s' requires an argument\n"),
-- argv[0], argv[optind - 1]);
-+ if (print_errors)
-+ {
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ char *buf;
-+
-+ if (__asprintf (&buf, _("\
-+%s: option `%s' requires an argument\n"),
-+ argv[0], argv[optind - 1]) >= 0)
-+ {
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s", buf);
-+ else
-+ fputs (buf, stderr);
-+
-+ free (buf);
-+ }
-+#else
-+ fprintf (stderr,
-+ _("%s: option `%s' requires an argument\n"),
-+ argv[0], argv[optind - 1]);
-+#endif
-+ }
- nextchar += strlen (nextchar);
- optopt = pfound->val;
- return optstring[0] == ':' ? ':' : '?';
-@@ -747,16 +824,47 @@
- if (!long_only || argv[optind][1] == '-'
- || my_index (optstring, *nextchar) == NULL)
- {
-- if (opterr)
-+ if (print_errors)
- {
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ char *buf;
-+ int n;
-+#endif
-+
- if (argv[optind][1] == '-')
-- /* --option */
-- fprintf (stderr, _("%s: unrecognized option `--%s'\n"),
-- argv[0], nextchar);
-+ {
-+ /* --option */
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ n = __asprintf (&buf, _("%s: unrecognized option `--%s'\n"),
-+ argv[0], nextchar);
-+#else
-+ fprintf (stderr, _("%s: unrecognized option `--%s'\n"),
-+ argv[0], nextchar);
-+#endif
-+ }
- else
-- /* +option or -option */
-- fprintf (stderr, _("%s: unrecognized option `%c%s'\n"),
-- argv[0], argv[optind][0], nextchar);
-+ {
-+ /* +option or -option */
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ n = __asprintf (&buf, _("%s: unrecognized option `%c%s'\n"),
-+ argv[0], argv[optind][0], nextchar);
-+#else
-+ fprintf (stderr, _("%s: unrecognized option `%c%s'\n"),
-+ argv[0], argv[optind][0], nextchar);
-+#endif
-+ }
-+
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ if (n >= 0)
-+ {
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s", buf);
-+ else
-+ fputs (buf, stderr);
-+
-+ free (buf);
-+ }
-+#endif
- }
- nextchar = (char *) "";
- optind++;
-@@ -777,15 +885,44 @@
-
- if (temp == NULL || c == ':')
- {
-- if (opterr)
-+ if (print_errors)
- {
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ char *buf;
-+ int n;
-+#endif
-+
- if (posixly_correct)
-- /* 1003.2 specifies the format of this message. */
-- fprintf (stderr, _("%s: illegal option -- %c\n"),
-- argv[0], c);
-+ {
-+ /* 1003.2 specifies the format of this message. */
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ n = __asprintf (&buf, _("%s: illegal option -- %c\n"),
-+ argv[0], c);
-+#else
-+ fprintf (stderr, _("%s: illegal option -- %c\n"), argv[0], c);
-+#endif
-+ }
- else
-- fprintf (stderr, _("%s: invalid option -- %c\n"),
-- argv[0], c);
-+ {
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ n = __asprintf (&buf, _("%s: invalid option -- %c\n"),
-+ argv[0], c);
-+#else
-+ fprintf (stderr, _("%s: invalid option -- %c\n"), argv[0], c);
-+#endif
-+ }
-+
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ if (n >= 0)
-+ {
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s", buf);
-+ else
-+ fputs (buf, stderr);
-+
-+ free (buf);
-+ }
-+#endif
- }
- optopt = c;
- return '?';
-@@ -811,11 +948,27 @@
- }
- else if (optind == argc)
- {
-- if (opterr)
-+ if (print_errors)
- {
- /* 1003.2 specifies the format of this message. */
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ char *buf;
-+
-+ if (__asprintf (&buf,
-+ _("%s: option requires an argument -- %c\n"),
-+ argv[0], c) >= 0)
-+ {
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s", buf);
-+ else
-+ fputs (buf, stderr);
-+
-+ free (buf);
-+ }
-+#else
- fprintf (stderr, _("%s: option requires an argument -- %c\n"),
- argv[0], c);
-+#endif
- }
- optopt = c;
- if (optstring[0] == ':')
-@@ -860,9 +1013,26 @@
- }
- if (ambig && !exact)
- {
-- if (opterr)
-- fprintf (stderr, _("%s: option `-W %s' is ambiguous\n"),
-- argv[0], argv[optind]);
-+ if (print_errors)
-+ {
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ char *buf;
-+
-+ if (__asprintf (&buf, _("%s: option `-W %s' is ambiguous\n"),
-+ argv[0], argv[optind]) >= 0)
-+ {
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s", buf);
-+ else
-+ fputs (buf, stderr);
-+
-+ free (buf);
-+ }
-+#else
-+ fprintf (stderr, _("%s: option `-W %s' is ambiguous\n"),
-+ argv[0], argv[optind]);
-+#endif
-+ }
- nextchar += strlen (nextchar);
- optind++;
- return '?';
-@@ -878,10 +1048,28 @@
- optarg = nameend + 1;
- else
- {
-- if (opterr)
-- fprintf (stderr, _("\
-+ if (print_errors)
-+ {
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ char *buf;
-+
-+ if (__asprintf (&buf, _("\
- %s: option `-W %s' doesn't allow an argument\n"),
-- argv[0], pfound->name);
-+ argv[0], pfound->name) >= 0)
-+ {
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s", buf);
-+ else
-+ fputs (buf, stderr);
-+
-+ free (buf);
-+ }
-+#else
-+ fprintf (stderr, _("\
-+%s: option `-W %s' doesn't allow an argument\n"),
-+ argv[0], pfound->name);
-+#endif
-+ }
-
- nextchar += strlen (nextchar);
- return '?';
-@@ -893,10 +1081,28 @@
- optarg = argv[optind++];
- else
- {
-- if (opterr)
-- fprintf (stderr,
-- _("%s: option `%s' requires an argument\n"),
-- argv[0], argv[optind - 1]);
-+ if (print_errors)
-+ {
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ char *buf;
-+
-+ if (__asprintf (&buf, _("\
-+%s: option `%s' requires an argument\n"),
-+ argv[0], argv[optind - 1]) >= 0)
-+ {
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s", buf);
-+ else
-+ fputs (buf, stderr);
-+
-+ free (buf);
-+ }
-+#else
-+ fprintf (stderr,
-+ _("%s: option `%s' requires an argument\n"),
-+ argv[0], argv[optind - 1]);
-+#endif
-+ }
- nextchar += strlen (nextchar);
- return optstring[0] == ':' ? ':' : '?';
- }
-@@ -940,12 +1146,28 @@
- }
- else if (optind == argc)
- {
-- if (opterr)
-+ if (print_errors)
- {
- /* 1003.2 specifies the format of this message. */
-+#if defined _LIBC && defined USE_IN_LIBIO
-+ char *buf;
-+
-+ if (__asprintf (&buf, _("\
-+%s: option requires an argument -- %c\n"),
-+ argv[0], c) >= 0)
-+ {
-+ if (_IO_fwide (stderr, 0) > 0)
-+ __fwprintf (stderr, L"%s", buf);
-+ else
-+ fputs (buf, stderr);
-+
-+ free (buf);
-+ }
-+#else
- fprintf (stderr,
-- _("%s: option requires an argument -- %c\n"),
-- argv[0], c);
-+ _("%s: option requires an argument -- %c\n"),
-+ argv[0], c);
-+#endif
- }
- optopt = c;
- if (optstring[0] == ':')
-diff -urNd -urNd patch-2.5.4/getopt.h patch-2.5.9/getopt.h
---- patch-2.5.4/getopt.h 1999-01-13 00:36:45.000000000 -0500
-+++ patch-2.5.9/getopt.h 2002-11-24 19:17:33.000000000 -0500
-@@ -1,21 +1,20 @@
- /* Declarations for getopt.
-- Copyright (C) 1989,90,91,92,93,94,96,97,98 Free Software Foundation, Inc.
-+ Copyright (C) 1989-1994, 1996-1999, 2001 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
-- The GNU C Library is free software; you can redistribute it and/or
-- modify it under the terms of the GNU Library General Public License as
-- published by the Free Software Foundation; either version 2 of the
-- License, or (at your option) any later version.
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-
-- The GNU C Library is distributed in the hope that it will be useful,
-+ This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-- Library General Public License for more details.
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-
-- You should have received a copy of the GNU Library General Public
-- License along with the GNU C Library; see the file COPYING.LIB. If not,
-- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-- Boston, MA 02111-1307, USA. */
-+ You should have received a copy of the GNU General Public License along
-+ with this program; if not, write to the Free Software Foundation,
-+ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
- #ifndef _GETOPT_H
-
-@@ -23,6 +22,17 @@
- # define _GETOPT_H 1
- #endif
-
-+/* If __GNU_LIBRARY__ is not already defined, either we are being used
-+ standalone, or this is the first header included in the source file.
-+ If we are being used with glibc, we need to include <features.h>, but
-+ that does not exist if we are standalone. So: if __GNU_LIBRARY__ is
-+ not defined, include <ctype.h>, which will pull in <features.h> for us
-+ if it's from glibc. (Why ctype.h? It's guaranteed to exist and it
-+ doesn't flood the namespace with stuff the way some other headers do.) */
-+#if !defined __GNU_LIBRARY__
-+# include <ctype.h>
-+#endif
-+
- #ifdef __cplusplus
- extern "C" {
- #endif
-@@ -82,7 +92,7 @@
-
- struct option
- {
--# if defined __STDC__ && __STDC__
-+# if (defined __STDC__ && __STDC__) || defined __cplusplus
- const char *name;
- # else
- char *name;
-@@ -126,25 +136,26 @@
- arguments to the option '\0'. This behavior is specific to the GNU
- `getopt'. */
-
--#if defined __STDC__ && __STDC__
-+#if (defined __STDC__ && __STDC__) || defined __cplusplus
- # ifdef __GNU_LIBRARY__
- /* Many other libraries have conflicting prototypes for getopt, with
- differences in the consts, in stdlib.h. To avoid compilation
- errors, only prototype getopt for the GNU C library. */
--extern int getopt (int __argc, char *const *__argv, const char *__shortopts);
-+extern int getopt (int ___argc, char *const *___argv, const char *__shortopts);
- # else /* not __GNU_LIBRARY__ */
- extern int getopt ();
- # endif /* __GNU_LIBRARY__ */
-
- # ifndef __need_getopt
--extern int getopt_long (int __argc, char *const *__argv, const char *__shortopts,
-+extern int getopt_long (int ___argc, char *const *___argv,
-+ const char *__shortopts,
- const struct option *__longopts, int *__longind);
--extern int getopt_long_only (int __argc, char *const *__argv,
-+extern int getopt_long_only (int ___argc, char *const *___argv,
- const char *__shortopts,
- const struct option *__longopts, int *__longind);
-
- /* Internal only. Users should not call this directly. */
--extern int _getopt_internal (int __argc, char *const *__argv,
-+extern int _getopt_internal (int ___argc, char *const *___argv,
- const char *__shortopts,
- const struct option *__longopts, int *__longind,
- int __long_only);
-diff -urNd -urNd patch-2.5.4/gettext.h patch-2.5.9/gettext.h
---- patch-2.5.4/gettext.h 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/gettext.h 2002-05-10 07:20:06.000000000 -0400
-@@ -0,0 +1,69 @@
-+/* Convenience header for conditional use of GNU <libintl.h>.
-+ Copyright (C) 1995-1998, 2000-2002 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+#ifndef _LIBGETTEXT_H
-+#define _LIBGETTEXT_H 1
-+
-+/* NLS can be disabled through the configure --disable-nls option. */
-+#if ENABLE_NLS
-+
-+/* Get declarations of GNU message catalog functions. */
-+# include <libintl.h>
-+
-+#else
-+
-+/* Solaris /usr/include/locale.h includes /usr/include/libintl.h, which
-+ chokes if dcgettext is defined as a macro. So include it now, to make
-+ later inclusions of <locale.h> a NOP. We don't include <libintl.h>
-+ as well because people using "gettext.h" will not include <libintl.h>,
-+ and also including <libintl.h> would fail on SunOS 4, whereas <locale.h>
-+ is OK. */
-+#if defined(__sun)
-+# include <locale.h>
-+#endif
-+
-+/* Disabled NLS.
-+ The casts to 'const char *' serve the purpose of producing warnings
-+ for invalid uses of the value returned from these functions.
-+ On pre-ANSI systems without 'const', the config.h file is supposed to
-+ contain "#define const". */
-+# define gettext(Msgid) ((const char *) (Msgid))
-+# define dgettext(Domainname, Msgid) ((const char *) (Msgid))
-+# define dcgettext(Domainname, Msgid, Category) ((const char *) (Msgid))
-+# define ngettext(Msgid1, Msgid2, N) \
-+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
-+# define dngettext(Domainname, Msgid1, Msgid2, N) \
-+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
-+# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \
-+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
-+# define textdomain(Domainname) ((const char *) (Domainname))
-+# define bindtextdomain(Domainname, Dirname) ((const char *) (Dirname))
-+# define bind_textdomain_codeset(Domainname, Codeset) ((const char *) (Codeset))
-+
-+#endif
-+
-+/* A pseudo function call that serves as a marker for the automated
-+ extraction of messages, but does not call gettext(). The run-time
-+ translation is done at a different place in the code.
-+ The argument, String, should be a literal string. Concatenated strings
-+ and other string expressions won't work.
-+ The macro's expansion is not parenthesized, so that it is suitable as
-+ initializer for static 'char[]' or 'const char[]' variables. */
-+#define gettext_noop(String) String
-+
-+#endif /* _LIBGETTEXT_H */
-diff -urNd -urNd patch-2.5.4/inp.c patch-2.5.9/inp.c
---- patch-2.5.4/inp.c 1999-08-30 02:20:08.000000000 -0400
-+++ patch-2.5.9/inp.c 2003-05-20 09:58:02.000000000 -0400
-@@ -1,9 +1,10 @@
- /* inputting files to be patched */
-
--/* $Id: inp.c,v 1.21 1999/08/30 06:20:08 eggert Exp $ */
-+/* $Id: inp.c,v 1.25 2003/05/20 13:58:02 eggert Exp $ */
-
--/* Copyright 1986, 1988 Larry Wall
-- Copyright 1991, 1992-1993, 1997-1998, 1999 Free Software Foundation, Inc.
-+/* Copyright (C) 1986, 1988 Larry Wall
-+ Copyright (C) 1991, 1992, 1993, 1997, 1998, 1999, 2002, 2003 Free
-+ Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -47,10 +48,10 @@
- static size_t tireclen; /* length of records in tmp file */
- static size_t last_line_size; /* size of last input line */
-
--static bool plan_a PARAMS ((char const *));/* yield FALSE if memory runs out */
--static void plan_b PARAMS ((char const *));
--static void report_revision PARAMS ((int));
--static void too_many_lines PARAMS ((char const *)) __attribute__((noreturn));
-+static bool plan_a (char const *); /* yield false if memory runs out */
-+static void plan_b (char const *);
-+static void report_revision (bool);
-+static void too_many_lines (char const *) __attribute__((noreturn));
-
- /* New patch--prepare to edit another file. */
-
-@@ -102,28 +103,28 @@
- /* Report whether a desired revision was found. */
-
- static void
--report_revision (int found_revision)
-+report_revision (bool found_revision)
- {
-- revision = quotearg (revision);
-+ char const *rev = quotearg (revision);
-
- if (found_revision)
- {
- if (verbosity == VERBOSE)
-- say ("Good. This file appears to be the %s version.\n", revision);
-+ say ("Good. This file appears to be the %s version.\n", rev);
- }
- else if (force)
- {
- if (verbosity != SILENT)
- say ("Warning: this file doesn't appear to be the %s version -- patching anyway.\n",
-- revision);
-+ rev);
- }
- else if (batch)
- fatal ("This file doesn't appear to be the %s version -- aborting.",
-- revision);
-+ rev);
- else
- {
- ask ("This file doesn't appear to be the %s version -- patch anyway? [n] ",
-- revision);
-+ rev);
- if (*buf != 'y')
- fatal ("aborted");
- }
-@@ -140,7 +141,7 @@
- void
- get_input_file (char const *filename, char const *outname)
- {
-- int elsewhere = strcmp (filename, outname);
-+ bool elsewhere = strcmp (filename, outname) != 0;
- char const *cs;
- char *diffbuf;
- char *getbuf;
-@@ -228,7 +229,7 @@
- or if storage isn't available. */
- if (! (size == instat.st_size
- && (buffer = malloc (size ? size : (size_t) 1))))
-- return FALSE;
-+ return false;
-
- /* Read the input file, but don't bother reading it if it's empty.
- When creating files, the files do not actually exist. */
-@@ -254,7 +255,7 @@
- /* Perhaps size is too large for this host. */
- close (ifd);
- free (buffer);
-- return FALSE;
-+ return false;
- }
- buffered += n;
- }
-@@ -274,7 +275,7 @@
- && (ptr = (char const **) malloc ((size_t) iline * sizeof *ptr))))
- {
- free (buffer);
-- return FALSE;
-+ return false;
- }
- iline = 0;
- for (s = buffer; ; s++)
-@@ -291,7 +292,7 @@
- {
- char const *rev = revision;
- int rev0 = rev[0];
-- int found_revision = 0;
-+ bool found_revision = false;
- size_t revlen = strlen (rev);
-
- if (revlen <= size)
-@@ -303,7 +304,7 @@
- && (s == buffer || ISSPACE ((unsigned char) s[-1]))
- && (s + 1 == limrev || ISSPACE ((unsigned char) s[revlen])))
- {
-- found_revision = 1;
-+ found_revision = true;
- break;
- }
- }
-@@ -314,7 +315,7 @@
- /* Plan A will work. */
- i_buffer = buffer;
- i_ptr = ptr;
-- return TRUE;
-+ return true;
- }
-
- /* Keep (virtually) nothing in memory. */
-@@ -326,7 +327,7 @@
- register int c;
- register size_t len;
- register size_t maxlen;
-- register int found_revision;
-+ register bool found_revision;
- register size_t i;
- register char const *rev;
- register size_t revlen;
-@@ -426,7 +427,7 @@
- WHICHBUF is ignored when the file is in memory. */
-
- char const *
--ifetch (LINENUM line, int whichbuf, size_t *psize)
-+ifetch (LINENUM line, bool whichbuf, size_t *psize)
- {
- register char const *q;
- register char const *p;
-@@ -444,9 +445,9 @@
- LINENUM baseline = line - offline;
-
- if (tiline[0] == baseline)
-- whichbuf = 0;
-+ whichbuf = false;
- else if (tiline[1] == baseline)
-- whichbuf = 1;
-+ whichbuf = true;
- else {
- tiline[whichbuf] = baseline;
- if (lseek (tifd, (off_t) (baseline/lines_per_buf * tibufsize),
-diff -urNd -urNd patch-2.5.4/inp.h patch-2.5.9/inp.h
---- patch-2.5.4/inp.h 1997-04-06 21:07:00.000000000 -0400
-+++ patch-2.5.9/inp.h 2003-05-20 10:05:22.000000000 -0400
-@@ -1,10 +1,29 @@
- /* inputting files to be patched */
-
--/* $Id: inp.h,v 1.4 1997/04/07 01:07:00 eggert Exp $ */
-+/* $Id: inp.h,v 1.7 2003/05/20 14:05:22 eggert Exp $ */
-+
-+/* Copyright (C) 1986, 1988 Larry Wall
-+ Copyright (C) 1991, 1992, 1993, 1997, 1998, 1999, 2002, 2003
-+ Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; see the file COPYING.
-+ If not, write to the Free Software Foundation,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
- XTERN LINENUM input_lines; /* how long is input file in lines */
-
--char const *ifetch PARAMS ((LINENUM, int, size_t *));
--void get_input_file PARAMS ((char const *, char const *));
--void re_input PARAMS ((void));
--void scan_input PARAMS ((char *));
-+char const *ifetch (LINENUM, bool, size_t *);
-+void get_input_file (char const *, char const *);
-+void re_input (void);
-+void scan_input (char *);
-diff -urNd -urNd patch-2.5.4/INSTALL patch-2.5.9/INSTALL
---- patch-2.5.4/INSTALL 1997-06-23 07:40:27.000000000 -0400
-+++ patch-2.5.9/INSTALL 2002-03-08 07:48:54.000000000 -0500
-@@ -1,3 +1,9 @@
-+Copyright 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-+Foundation, Inc.
-+
-+ This file is free documentation; the Free Software Foundation gives
-+unlimited permission to copy, distribute and modify it.
-+
- Basic Installation
- ==================
-
-@@ -8,20 +14,27 @@
- those values to create a `Makefile' in each directory of the package.
- It may also create one or more `.h' files containing system-dependent
- definitions. Finally, it creates a shell script `config.status' that
--you can run in the future to recreate the current configuration, a file
--`config.cache' that saves the results of its tests to speed up
--reconfiguring, and a file `config.log' containing compiler output
--(useful mainly for debugging `configure').
-+you can run in the future to recreate the current configuration, and a
-+file `config.log' containing compiler output (useful mainly for
-+debugging `configure').
-+
-+ It can also use an optional file (typically called `config.cache'
-+and enabled with `--cache-file=config.cache' or simply `-C') that saves
-+the results of its tests to speed up reconfiguring. (Caching is
-+disabled by default to prevent problems with accidental use of stale
-+cache files.)
-
- If you need to do unusual things to compile the package, please try
- to figure out how `configure' could check whether to do them, and mail
- diffs or instructions to the address given in the `README' so they can
--be considered for the next release. If at some point `config.cache'
--contains results you don't want to keep, you may remove or edit it.
-+be considered for the next release. If you are using the cache, and at
-+some point `config.cache' contains results you don't want to keep, you
-+may remove or edit it.
-
-- The file `configure.in' is used to create `configure' by a program
--called `autoconf'. You only need `configure.in' if you want to change
--it or regenerate `configure' using a newer version of `autoconf'.
-+ The file `configure.ac' (or `configure.in') is used to create
-+`configure' by a program called `autoconf'. You only need
-+`configure.ac' if you want to change it or regenerate `configure' using
-+a newer version of `autoconf'.
-
- The simplest way to compile this package is:
-
-@@ -55,14 +68,15 @@
- =====================
-
- Some systems require unusual options for compilation or linking that
--the `configure' script does not know about. You can give `configure'
--initial values for variables by setting them in the environment. Using
--a Bourne-compatible shell, you can do that on the command line like
--this:
-- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-+the `configure' script does not know about. Run `./configure --help'
-+for details on some of the pertinent environment variables.
-
--Or on systems that have the `env' program, you can do it like this:
-- env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-+ You can give `configure' initial values for variables by setting
-+them in the environment. You can do that on the command line like this:
-+
-+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-+
-+ *Note Defining Variables::, for more details.
-
- Compiling For Multiple Architectures
- ====================================
-@@ -75,11 +89,11 @@
- the `configure' script. `configure' automatically checks for the
- source code in the directory that `configure' is in and in `..'.
-
-- If you have to use a `make' that does not supports the `VPATH'
--variable, you have to compile the package for one architecture at a time
--in the source code directory. After you have installed the package for
--one architecture, use `make distclean' before reconfiguring for another
--architecture.
-+ If you have to use a `make' that does not support the `VPATH'
-+variable, you have to compile the package for one architecture at a
-+time in the source code directory. After you have installed the
-+package for one architecture, use `make distclean' before reconfiguring
-+for another architecture.
-
- Installation Names
- ==================
-@@ -122,22 +136,32 @@
- Specifying the System Type
- ==========================
-
-- There may be some features `configure' can not figure out
--automatically, but needs to determine by the type of host the package
--will run on. Usually `configure' can figure that out, but if it prints
--a message saying it can not guess the host type, give it the
--`--host=TYPE' option. TYPE can either be a short name for the system
--type, such as `sun4', or a canonical name with three fields:
-+ There may be some features `configure' cannot figure out
-+automatically, but needs to determine by the type of machine the package
-+will run on. Usually, assuming the package is built to be run on the
-+_same_ architectures, `configure' can figure that out, but if it prints
-+a message saying it cannot guess the machine type, give it the
-+`--build=TYPE' option. TYPE can either be a short name for the system
-+type, such as `sun4', or a canonical name which has the form:
-+
- CPU-COMPANY-SYSTEM
-
--See the file `config.sub' for the possible values of each field. If
-+where SYSTEM can have one of these forms:
-+
-+ OS KERNEL-OS
-+
-+ See the file `config.sub' for the possible values of each field. If
- `config.sub' isn't included in this package, then this package doesn't
--need to know the host type.
-+need to know the machine type.
-
-- If you are building compiler tools for cross-compiling, you can also
-+ If you are _building_ compiler tools for cross-compiling, you should
- use the `--target=TYPE' option to select the type of system they will
--produce code for and the `--build=TYPE' option to select the type of
--system on which you are compiling the package.
-+produce code for.
-+
-+ If you want to _use_ a cross compiler, that generates code for a
-+platform different from the build platform, you should specify the
-+"host" platform (i.e., that on which the generated programs will
-+eventually be run) with `--host=TYPE'.
-
- Sharing Defaults
- ================
-@@ -150,20 +174,44 @@
- `CONFIG_SITE' environment variable to the location of the site script.
- A warning: not all `configure' scripts look for a site script.
-
--Operation Controls
-+Defining Variables
- ==================
-
-+ Variables not defined in a site shell script can be set in the
-+environment passed to `configure'. However, some packages may run
-+configure again during the build, and the customized values of these
-+variables may be lost. In order to avoid this problem, you should set
-+them in the `configure' command line, using `VAR=value'. For example:
-+
-+ ./configure CC=/usr/local2/bin/gcc
-+
-+will cause the specified gcc to be used as the C compiler (unless it is
-+overridden in the site shell script).
-+
-+`configure' Invocation
-+======================
-+
- `configure' recognizes the following options to control how it
- operates.
-
--`--cache-file=FILE'
-- Use and save the results of the tests in FILE instead of
-- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
-- debugging `configure'.
--
- `--help'
-+`-h'
- Print a summary of the options to `configure', and exit.
-
-+`--version'
-+`-V'
-+ Print the version of Autoconf used to generate the `configure'
-+ script, and exit.
-+
-+`--cache-file=FILE'
-+ Enable the cache: use and save the results of the tests in FILE,
-+ traditionally `config.cache'. FILE defaults to `/dev/null' to
-+ disable caching.
-+
-+`--config-cache'
-+`-C'
-+ Alias for `--cache-file=config.cache'.
-+
- `--quiet'
- `--silent'
- `-q'
-@@ -175,8 +223,6 @@
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
--`--version'
-- Print the version of Autoconf used to generate the `configure'
-- script, and exit.
-+`configure' also accepts some other, not widely useful, options. Run
-+`configure --help' for more details.
-
--`configure' also accepts some other, not widely useful, options.
-diff -urNd -urNd patch-2.5.4/install-sh patch-2.5.9/install-sh
---- patch-2.5.4/install-sh 1999-03-02 08:44:48.000000000 -0500
-+++ patch-2.5.9/install-sh 2003-05-09 13:22:21.000000000 -0400
-@@ -1,19 +1,37 @@
- #!/bin/sh
- #
- # install - install a program, script, or datafile
--# This comes from X11R5 (mit/util/scripts/install.sh).
- #
--# Copyright 1991 by the Massachusetts Institute of Technology
-+# This originates from X11R5 (mit/util/scripts/install.sh), which was
-+# later released in X11R6 (xc/config/util/install.sh) with the
-+# following copyright and license.
- #
--# Permission to use, copy, modify, distribute, and sell this software and its
--# documentation for any purpose is hereby granted without fee, provided that
--# the above copyright notice appear in all copies and that both that
--# copyright notice and this permission notice appear in supporting
--# documentation, and that the name of M.I.T. not be used in advertising or
--# publicity pertaining to distribution of the software without specific,
--# written prior permission. M.I.T. makes no representations about the
--# suitability of this software for any purpose. It is provided "as is"
--# without express or implied warranty.
-+# Copyright (C) 1994 X Consortium
-+#
-+# Permission is hereby granted, free of charge, to any person obtaining a copy
-+# of this software and associated documentation files (the "Software"), to
-+# deal in the Software without restriction, including without limitation the
-+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-+# sell copies of the Software, and to permit persons to whom the Software is
-+# furnished to do so, subject to the following conditions:
-+#
-+# The above copyright notice and this permission notice shall be included in
-+# all copies or substantial portions of the Software.
-+#
-+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-+#
-+# Except as contained in this notice, the name of the X Consortium shall not
-+# be used in advertising or otherwise to promote the sale, use or other deal-
-+# ings in this Software without prior written authorization from the X Consor-
-+# tium.
-+#
-+#
-+# FSF changes to this file are in the public domain.
- #
- # Calling this script install-sh is preferred over install.sh, to prevent
- # `make' implicit rules from creating a file called install from it
-@@ -56,7 +74,7 @@
-
- while [ x"$1" != x ]; do
- case $1 in
-- -c) instcmd="$cpprog"
-+ -c) instcmd=$cpprog
- shift
- continue;;
-
-@@ -79,7 +97,7 @@
- shift
- continue;;
-
-- -s) stripcmd="$stripprog"
-+ -s) stripcmd=$stripprog
- shift
- continue;;
-
-@@ -106,17 +124,17 @@
-
- if [ x"$src" = x ]
- then
-- echo "install: no input file specified"
-+ echo "$0: no input file specified" >&2
- exit 1
- else
-- true
-+ :
- fi
-
- if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
--
-- if [ -d $dst ]; then
-+
-+ if [ -d "$dst" ]; then
- instcmd=:
- chmodcmd=""
- else
-@@ -125,38 +143,38 @@
- else
-
- # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
--# might cause directories to be created, which would be especially bad
-+# might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
-
-- if [ -f $src -o -d $src ]
-+ if [ -f "$src" ] || [ -d "$src" ]
- then
-- true
-+ :
- else
-- echo "install: $src does not exist"
-+ echo "$0: $src does not exist" >&2
- exit 1
- fi
--
-+
- if [ x"$dst" = x ]
- then
-- echo "install: no destination specified"
-+ echo "$0: no destination specified" >&2
- exit 1
- else
-- true
-+ :
- fi
-
- # If destination is a directory, append the input filename; if your system
- # does not like double slashes in filenames, you may need to add some logic
-
-- if [ -d $dst ]
-+ if [ -d "$dst" ]
- then
-- dst="$dst"/`basename $src`
-+ dst=$dst/`basename "$src"`
- else
-- true
-+ :
- fi
- fi
-
- ## this sed command emulates the dirname command
--dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
- # Make sure that the destination directory exists.
- # this part is taken from Noah Friedman's mkinstalldirs script
-@@ -165,69 +183,73 @@
- if [ ! -d "$dstdir" ]; then
- defaultIFS='
- '
--IFS="${IFS-${defaultIFS}}"
-+IFS="${IFS-$defaultIFS}"
-
--oIFS="${IFS}"
-+oIFS=$IFS
- # Some sh's can't handle IFS=/ for some reason.
- IFS='%'
--set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
--IFS="${oIFS}"
-+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-+IFS=$oIFS
-
- pathcomp=''
-
- while [ $# -ne 0 ] ; do
-- pathcomp="${pathcomp}${1}"
-+ pathcomp=$pathcomp$1
- shift
-
-- if [ ! -d "${pathcomp}" ] ;
-+ if [ ! -d "$pathcomp" ] ;
- then
-- $mkdirprog "${pathcomp}"
-+ $mkdirprog "$pathcomp"
- else
-- true
-+ :
- fi
-
-- pathcomp="${pathcomp}/"
-+ pathcomp=$pathcomp/
- done
- fi
-
- if [ x"$dir_arg" != x ]
- then
-- $doit $instcmd $dst &&
-+ $doit $instcmd "$dst" &&
-
-- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
-+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
-+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
-+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
- else
-
- # If we're going to rename the final executable, determine the name now.
-
-- if [ x"$transformarg" = x ]
-+ if [ x"$transformarg" = x ]
- then
-- dstfile=`basename $dst`
-+ dstfile=`basename "$dst"`
- else
-- dstfile=`basename $dst $transformbasename |
-+ dstfile=`basename "$dst" $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
- # don't allow the sed command to completely eliminate the filename
-
-- if [ x"$dstfile" = x ]
-+ if [ x"$dstfile" = x ]
- then
-- dstfile=`basename $dst`
-+ dstfile=`basename "$dst"`
- else
-- true
-+ :
- fi
-
--# Make a temp file name in the proper directory.
-+# Make a couple of temp file names in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-+ rmtmp=$dstdir/#rm.$$#
-
--# Move or copy the file name to the temp name
-+# Trap to clean up temp files at exit.
-
-- $doit $instcmd $src $dsttmp &&
-+ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-+ trap '(exit $?); exit' 1 2 13 15
-
-- trap "rm -f ${dsttmp}" 0 &&
-+# Move or copy the file name to the temp name
-+
-+ $doit $instcmd "$src" "$dsttmp" &&
-
- # and set any options; do chmod last to preserve setuid bits
-
-@@ -235,17 +257,38 @@
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $instcmd $src $dsttmp" command.
-
-- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
-+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
-+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
-+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
-+
-+# Now remove or move aside any old file at destination location. We try this
-+# two ways since rm can't unlink itself on some systems and the destination
-+# file might be busy for other reasons. In this case, the final cleanup
-+# might fail but the new file should still install successfully.
-+
-+{
-+ if [ -f "$dstdir/$dstfile" ]
-+ then
-+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
-+ $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
-+ {
-+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-+ (exit 1); exit
-+ }
-+ else
-+ :
-+ fi
-+} &&
-
- # Now rename the file to the real destination.
-
-- $doit $rmcmd -f $dstdir/$dstfile &&
-- $doit $mvcmd $dsttmp $dstdir/$dstfile
-+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-
- fi &&
-
-+# The final little trick to "correctly" pass the exit status to the exit trap.
-
--exit 0
-+{
-+ (exit 0); exit
-+}
-diff -urNd -urNd patch-2.5.4/m4/backupfile.m4 patch-2.5.9/m4/backupfile.m4
---- patch-2.5.4/m4/backupfile.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/backupfile.m4 2002-12-31 08:42:06.000000000 -0500
-@@ -0,0 +1,23 @@
-+# backupfile.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_BACKUPFILE],
-+[
-+ dnl Prerequisites of lib/backupfile.c.
-+ AC_REQUIRE([AC_HEADER_DIRENT])
-+ AC_REQUIRE([AC_FUNC_CLOSEDIR_VOID])
-+ AC_CHECK_HEADERS_ONCE(limits.h stdlib.h string.h)
-+ AC_CHECK_DECLS_ONCE(getenv malloc)
-+ jm_CHECK_TYPE_STRUCT_DIRENT_D_INO
-+
-+ dnl Prerequisites of lib/addext.c.
-+ AC_REQUIRE([jm_AC_DOS])
-+ AC_SYS_LONG_FILE_NAMES
-+ AC_CHECK_HEADERS_ONCE(limits.h string.h unistd.h)
-+ AC_CHECK_FUNCS(pathconf)
-+])
-diff -urNd -urNd patch-2.5.4/m4/ccstdc.m4 patch-2.5.9/m4/ccstdc.m4
---- patch-2.5.4/m4/ccstdc.m4 1999-06-16 07:11:07.000000000 -0400
-+++ patch-2.5.9/m4/ccstdc.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,95 +0,0 @@
--# The following is taken from automake 1.4,
--# except that it prefers the compiler option -Ae to "-Aa -D_HPUX_SOURCE"
--# because only the former supports 64-bit integral types on HP-UX 10.20.
--
--## ----------------------------------------- ##
--## ANSIfy the C compiler whenever possible. ##
--## From Franc,ois Pinard ##
--## ----------------------------------------- ##
--
--# serial 2
--
--# @defmac AC_PROG_CC_STDC
--# @maindex PROG_CC_STDC
--# @ovindex CC
--# If the C compiler in not in ANSI C mode by default, try to add an option
--# to output variable @code{CC} to make it so. This macro tries various
--# options that select ANSI C on some system or another. It considers the
--# compiler to be in ANSI C mode if it handles function prototypes correctly.
--#
--# If you use this macro, you should check after calling it whether the C
--# compiler has been set to accept ANSI C; if not, the shell variable
--# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source
--# code in ANSI C, you can make an un-ANSIfied copy of it by using the
--# program @code{ansi2knr}, which comes with Ghostscript.
--# @end defmac
--
--AC_DEFUN(AM_PROG_CC_STDC,
--[AC_REQUIRE([AC_PROG_CC])
--AC_BEFORE([$0], [AC_C_INLINE])
--AC_BEFORE([$0], [AC_C_CONST])
--dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require
--dnl a magic option to avoid problems with ANSI preprocessor commands
--dnl like #elif.
--dnl FIXME: can't do this because then AC_AIX won't work due to a
--dnl circular dependency.
--dnl AC_BEFORE([$0], [AC_PROG_CPP])
--AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
--AC_CACHE_VAL(am_cv_prog_cc_stdc,
--[am_cv_prog_cc_stdc=no
--ac_save_CC="$CC"
--# Don't try gcc -ansi; that turns off useful extensions and
--# breaks some systems' header files.
--# AIX -qlanglvl=ansi
--# Ultrix and OSF/1 -std1
--# HP-UX -Aa -D_HPUX_SOURCE
--# SVR4 -Xc -D__EXTENSIONS__
--for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
--do
-- CC="$ac_save_CC $ac_arg"
-- AC_TRY_COMPILE(
--[#include <stdarg.h>
--#include <stdio.h>
--#include <sys/types.h>
--#include <sys/stat.h>
--/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
--struct buf { int x; };
--FILE * (*rcsopen) (struct buf *, struct stat *, int);
--static char *e (p, i)
-- char **p;
-- int i;
--{
-- return p[i];
--}
--static char *f (char * (*g) (char **, int), char **p, ...)
--{
-- char *s;
-- va_list v;
-- va_start (v,p);
-- s = g (p, va_arg (v,int));
-- va_end (v);
-- return s;
--}
--int test (int i, double x);
--struct s1 {int (*f) (int a);};
--struct s2 {int (*f) (double a);};
--int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
--int argc;
--char **argv;
--], [
--return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
--],
--[am_cv_prog_cc_stdc="$ac_arg"; break])
--done
--CC="$ac_save_CC"
--])
--if test -z "$am_cv_prog_cc_stdc"; then
-- AC_MSG_RESULT([none needed])
--else
-- AC_MSG_RESULT($am_cv_prog_cc_stdc)
--fi
--case "x$am_cv_prog_cc_stdc" in
-- x|xno) ;;
-- *) CC="$CC $am_cv_prog_cc_stdc" ;;
--esac
--])
-diff -urNd -urNd patch-2.5.4/m4/d-ino.m4 patch-2.5.9/m4/d-ino.m4
---- patch-2.5.4/m4/d-ino.m4 1999-01-26 23:51:43.000000000 -0500
-+++ patch-2.5.9/m4/d-ino.m4 2002-12-31 08:43:06.000000000 -0500
-@@ -1,11 +1,11 @@
--#serial 2
-+#serial 5
-
- dnl From Jim Meyering.
- dnl
- dnl Check whether struct dirent has a member named d_ino.
- dnl
-
--AC_DEFUN(jm_STRUCT_DIRENT_D_INO,
-+AC_DEFUN([jm_CHECK_TYPE_STRUCT_DIRENT_D_INO],
- [AC_REQUIRE([AC_HEADER_DIRENT])dnl
- AC_CACHE_CHECK([for d_ino member in directory struct],
- jm_cv_struct_dirent_d_ino,
-@@ -35,8 +35,8 @@
- )
- if test $jm_cv_struct_dirent_d_ino = yes; then
- AC_DEFINE(D_INO_IN_DIRENT, 1,
-- [Define if there is a member named d_ino in the struct describing
-- directory headers.])
-+ [Define if there is a member named d_ino in the struct describing
-+ directory headers.])
- fi
- ]
- )
-diff -urNd -urNd patch-2.5.4/m4/dirname.m4 patch-2.5.9/m4/dirname.m4
---- patch-2.5.4/m4/dirname.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/dirname.m4 2002-12-31 08:42:06.000000000 -0500
-@@ -0,0 +1,25 @@
-+# dirname.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_DIRNAME],
-+[
-+ dnl Prerequisites of lib/dirname.h.
-+ AC_REQUIRE([jm_AC_DOS])
-+
-+ dnl Prerequisites of lib/dirname.c.
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_CHECK_HEADERS_ONCE(string.h)
-+
-+ dnl Prerequisites of lib/basename.c.
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_CHECK_HEADERS_ONCE(string.h)
-+
-+ dnl Prerequisites of lib/stripslash.c.
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_CHECK_HEADERS_ONCE(string.h)
-+])
-diff -urNd -urNd patch-2.5.4/m4/dos.m4 patch-2.5.9/m4/dos.m4
---- patch-2.5.4/m4/dos.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/dos.m4 2001-08-12 09:26:00.000000000 -0400
-@@ -0,0 +1,53 @@
-+#serial 5
-+
-+# Define some macros required for proper operation of code in lib/*.c
-+# on MSDOS/Windows systems.
-+
-+# From Jim Meyering.
-+
-+AC_DEFUN([jm_AC_DOS],
-+ [
-+ AC_CACHE_CHECK([whether system is Windows or MSDOS], [ac_cv_win_or_dos],
-+ [
-+ AC_TRY_COMPILE([],
-+ [#if !defined _WIN32 && !defined __WIN32__ && !defined __MSDOS__
-+neither MSDOS nor Windows
-+#endif],
-+ [ac_cv_win_or_dos=yes],
-+ [ac_cv_win_or_dos=no])
-+ ])
-+
-+ if test x"$ac_cv_win_or_dos" = xyes; then
-+ ac_fs_accepts_drive_letter_prefix=1
-+ ac_fs_backslash_is_file_name_separator=1
-+ else
-+ ac_fs_accepts_drive_letter_prefix=0
-+ ac_fs_backslash_is_file_name_separator=0
-+ fi
-+
-+ AH_VERBATIM(FILESYSTEM_PREFIX_LEN,
-+ [#if FILESYSTEM_ACCEPTS_DRIVE_LETTER_PREFIX
-+# define FILESYSTEM_PREFIX_LEN(Filename) \
-+ ((Filename)[0] && (Filename)[1] == ':' ? 2 : 0)
-+#else
-+# define FILESYSTEM_PREFIX_LEN(Filename) 0
-+#endif])
-+
-+ AC_DEFINE_UNQUOTED([FILESYSTEM_ACCEPTS_DRIVE_LETTER_PREFIX],
-+ $ac_fs_accepts_drive_letter_prefix,
-+ [Define on systems for which file names may have a so-called
-+ `drive letter' prefix, define this to compute the length of that
-+ prefix, including the colon.])
-+
-+ AH_VERBATIM(ISSLASH,
-+ [#if FILESYSTEM_BACKSLASH_IS_FILE_NAME_SEPARATOR
-+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
-+#else
-+# define ISSLASH(C) ((C) == '/')
-+#endif])
-+
-+ AC_DEFINE_UNQUOTED([FILESYSTEM_BACKSLASH_IS_FILE_NAME_SEPARATOR],
-+ $ac_fs_backslash_is_file_name_separator,
-+ [Define if the backslash character may also serve as a file name
-+ component separator.])
-+ ])
-diff -urNd -urNd patch-2.5.4/m4/error.m4 patch-2.5.9/m4/error.m4
---- patch-2.5.4/m4/error.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/error.m4 2003-04-21 23:28:22.000000000 -0400
-@@ -0,0 +1,18 @@
-+#serial 7
-+
-+AC_DEFUN([gl_ERROR],
-+[
-+ AC_FUNC_ERROR_AT_LINE
-+ dnl Note: AC_FUNC_ERROR_AT_LINE does AC_LIBSOURCES([error.h, error.c]).
-+ jm_PREREQ_ERROR
-+])
-+
-+# Prerequisites of lib/error.c.
-+AC_DEFUN([jm_PREREQ_ERROR],
-+[
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_REQUIRE([AC_FUNC_VPRINTF])
-+ AC_CHECK_FUNCS(strerror)
-+ AC_CHECK_DECLS([strerror])
-+ AC_FUNC_STRERROR_R
-+])
-diff -urNd -urNd patch-2.5.4/m4/getopt.m4 patch-2.5.9/m4/getopt.m4
---- patch-2.5.4/m4/getopt.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/getopt.m4 2002-12-31 08:42:06.000000000 -0500
-@@ -0,0 +1,13 @@
-+# getopt.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_GETOPT],
-+[
-+ dnl Prerequisites of lib/getopt.c.
-+ AC_CHECK_HEADERS_ONCE(string.h)
-+])
-diff -urNd -urNd patch-2.5.4/m4/inttypes_h.m4 patch-2.5.9/m4/inttypes_h.m4
---- patch-2.5.4/m4/inttypes_h.m4 1999-01-10 17:47:01.000000000 -0500
-+++ patch-2.5.9/m4/inttypes_h.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,22 +0,0 @@
--#serial 3
--
--dnl From Paul Eggert.
--
--# Define HAVE_INTTYPES_H if <inttypes.h> exists,
--# doesn't clash with <sys/types.h>, and declares uintmax_t.
--
--AC_DEFUN(jm_AC_HEADER_INTTYPES_H,
--[
-- AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
-- [AC_TRY_COMPILE(
-- [#include <sys/types.h>
--#include <inttypes.h>],
-- [uintmax_t i = (uintmax_t) -1;],
-- jm_ac_cv_header_inttypes_h=yes,
-- jm_ac_cv_header_inttypes_h=no)])
-- if test $jm_ac_cv_header_inttypes_h = yes; then
-- AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1,
--[Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
-- and declares uintmax_t. ])
-- fi
--])
-diff -urNd -urNd patch-2.5.4/m4/largefile.m4 patch-2.5.9/m4/largefile.m4
---- patch-2.5.4/m4/largefile.m4 1999-08-17 15:56:44.000000000 -0400
-+++ patch-2.5.9/m4/largefile.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,115 +0,0 @@
--#serial 5
--
--dnl By default, many hosts won't let programs access large files;
--dnl one must use special compiler options to get large-file access to work.
--dnl For more details about this brain damage please see:
--dnl http://www.sas.com/standards/large.file/x_open.20Mar96.html
--
--dnl Written by Paul Eggert <eggert at twinsun.com>.
--
--dnl Internal subroutine of AC_SYS_LARGEFILE.
--dnl AC_SYS_LARGEFILE_FLAGS(FLAGSNAME)
--AC_DEFUN(AC_SYS_LARGEFILE_FLAGS,
-- [AC_CACHE_CHECK([for $1 value to request large file support],
-- ac_cv_sys_largefile_$1,
-- [ac_cv_sys_largefile_$1=`($GETCONF LFS_$1) 2>/dev/null` || {
-- ac_cv_sys_largefile_$1=no
-- ifelse($1, CFLAGS,
-- [case "$host_os" in
-- # IRIX 6.2 and later require cc -n32.
--changequote(, )dnl
-- irix6.[2-9]* | irix6.1[0-9]* | irix[7-9].* | irix[1-9][0-9]*)
--changequote([, ])dnl
-- if test "$GCC" != yes; then
-- ac_cv_sys_largefile_CFLAGS=-n32
-- fi
-- ac_save_CC="$CC"
-- CC="$CC $ac_cv_sys_largefile_CFLAGS"
-- AC_TRY_LINK(, , , ac_cv_sys_largefile_CFLAGS=no)
-- CC="$ac_save_CC"
-- esac])
-- }])])
--
--dnl Internal subroutine of AC_SYS_LARGEFILE.
--dnl AC_SYS_LARGEFILE_SPACE_APPEND(VAR, VAL)
--AC_DEFUN(AC_SYS_LARGEFILE_SPACE_APPEND,
-- [case $2 in
-- no) ;;
-- ?*)
-- case "[$]$1" in
-- '') $1=$2 ;;
-- *) $1=[$]$1' '$2 ;;
-- esac ;;
-- esac])
--
--dnl Internal subroutine of AC_SYS_LARGEFILE.
--dnl AC_SYS_LARGEFILE_MACRO_VALUE(C-MACRO, CACHE-VAR, COMMENT, CODE-TO-SET-DEFAULT)
--AC_DEFUN(AC_SYS_LARGEFILE_MACRO_VALUE,
-- [AC_CACHE_CHECK([for $1], $2,
-- [$2=no
--changequote(, )dnl
-- $4
-- for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-- case "$ac_flag" in
-- -D$1)
-- $2=1 ;;
-- -D$1=*)
-- $2=`expr " $ac_flag" : '[^=]*=\(.*\)'` ;;
-- esac
-- done
--changequote([, ])dnl
-- ])
-- if test "[$]$2" != no; then
-- AC_DEFINE_UNQUOTED([$1], [$]$2, [$3])
-- fi])
--
--AC_DEFUN(AC_SYS_LARGEFILE,
-- [AC_REQUIRE([AC_CANONICAL_HOST])
-- AC_ARG_ENABLE(largefile,
-- [ --disable-largefile omit support for large files])
-- if test "$enable_largefile" != no; then
-- AC_CHECK_TOOL(GETCONF, getconf)
-- AC_SYS_LARGEFILE_FLAGS(CFLAGS)
-- AC_SYS_LARGEFILE_FLAGS(LDFLAGS)
-- AC_SYS_LARGEFILE_FLAGS(LIBS)
--
-- for ac_flag in $ac_cv_sys_largefile_CFLAGS no; do
-- case "$ac_flag" in
-- no) ;;
-- -D_FILE_OFFSET_BITS=*) ;;
-- -D_LARGEFILE_SOURCE | -D_LARGEFILE_SOURCE=*) ;;
-- -D_LARGE_FILES | -D_LARGE_FILES=*) ;;
-- -D?* | -I?*)
-- AC_SYS_LARGEFILE_SPACE_APPEND(CPPFLAGS, "$ac_flag") ;;
-- *)
-- AC_SYS_LARGEFILE_SPACE_APPEND(CFLAGS, "$ac_flag") ;;
-- esac
-- done
-- AC_SYS_LARGEFILE_SPACE_APPEND(LDFLAGS, "$ac_cv_sys_largefile_LDFLAGS")
-- AC_SYS_LARGEFILE_SPACE_APPEND(LIBS, "$ac_cv_sys_largefile_LIBS")
-- AC_SYS_LARGEFILE_MACRO_VALUE(_FILE_OFFSET_BITS,
-- ac_cv_sys_file_offset_bits,
-- [Number of bits in a file offset, on hosts where this is settable.],
-- [case "$host_os" in
-- # HP-UX 10.20 and later
-- hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-- ac_cv_sys_file_offset_bits=64 ;;
-- esac])
-- AC_SYS_LARGEFILE_MACRO_VALUE(_LARGEFILE_SOURCE,
-- ac_cv_sys_largefile_source,
-- [Define to make fseeko etc. visible, on some hosts.],
-- [case "$host_os" in
-- # HP-UX 10.20 and later
-- hpux10.[2-9][0-9]* | hpux1[1-9]* | hpux[2-9][0-9]*)
-- ac_cv_sys_largefile_source=1 ;;
-- esac])
-- AC_SYS_LARGEFILE_MACRO_VALUE(_LARGE_FILES,
-- ac_cv_sys_large_files,
-- [Define for large files, on AIX-style hosts.],
-- [case "$host_os" in
-- # AIX 4.2 and later
-- aix4.[2-9]* | aix4.1[0-9]* | aix[5-9].* | aix[1-9][0-9]*)
-- ac_cv_sys_large_files=1 ;;
-- esac])
-- fi
-- ])
-diff -urNd -urNd patch-2.5.4/m4/malloc.m4 patch-2.5.9/m4/malloc.m4
---- patch-2.5.4/m4/malloc.m4 1999-02-07 00:35:28.000000000 -0500
-+++ patch-2.5.9/m4/malloc.m4 2002-12-31 08:43:06.000000000 -0500
-@@ -1,35 +1,25 @@
--#serial 3
-+# malloc.m4 serial 7
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-
- dnl From Jim Meyering.
- dnl Determine whether malloc accepts 0 as its argument.
- dnl If it doesn't, arrange to use the replacement function.
--dnl
-
--AC_DEFUN(jm_FUNC_MALLOC,
-+AC_DEFUN([jm_FUNC_MALLOC],
- [
-- dnl xmalloc.c requires that this symbol be defined so it doesn't
-- dnl mistakenly use a broken malloc -- as it might if this test were omitted.
-- AC_DEFINE_UNQUOTED(HAVE_DONE_WORKING_MALLOC_CHECK, 1,
-- [Define if the malloc check has been performed. ])
--
-- AC_CACHE_CHECK([for working malloc], jm_cv_func_working_malloc,
-- [AC_TRY_RUN([
-- char *malloc ();
-- int
-- main ()
-- {
-- exit (malloc (0) ? 0 : 1);
-- }
-- ],
-- jm_cv_func_working_malloc=yes,
-- jm_cv_func_working_malloc=no,
-- dnl When crosscompiling, assume malloc is broken.
-- jm_cv_func_working_malloc=no)
-- ])
-- if test $jm_cv_func_working_malloc = no; then
-- AC_SUBST(LIBOBJS)
-- LIBOBJS="$LIBOBJS malloc.$ac_objext"
-- AC_DEFINE_UNQUOTED(malloc, rpl_malloc,
-- [Define to rpl_malloc if the replacement function should be used.])
-+ AC_REQUIRE([AC_FUNC_MALLOC])
-+ dnl autoconf < 2.57 used the symbol ac_cv_func_malloc_works.
-+ if test X"$ac_cv_func_malloc_0_nonnull" = Xno || test X"$ac_cv_func_malloc_works" = Xno; then
-+ gl_PREREQ_MALLOC
- fi
- ])
-+
-+# Prerequisites of lib/malloc.c.
-+AC_DEFUN([gl_PREREQ_MALLOC], [
-+ :
-+])
-diff -urNd -urNd patch-2.5.4/m4/mbrtowc.m4 patch-2.5.9/m4/mbrtowc.m4
---- patch-2.5.4/m4/mbrtowc.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/mbrtowc.m4 2002-12-31 08:43:06.000000000 -0500
-@@ -0,0 +1,27 @@
-+# mbrtowc.m4 serial 5
-+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl From Paul Eggert
-+
-+dnl This file can be removed, and jm_FUNC_MBRTOWC replaced with
-+dnl AC_FUNC_MBRTOWC, when autoconf 2.57 can be assumed everywhere.
-+
-+AC_DEFUN([jm_FUNC_MBRTOWC],
-+[
-+ AC_CACHE_CHECK([whether mbrtowc and mbstate_t are properly declared],
-+ jm_cv_func_mbrtowc,
-+ [AC_TRY_LINK(
-+ [#include <wchar.h>],
-+ [mbstate_t state; return ! (sizeof state && mbrtowc);],
-+ jm_cv_func_mbrtowc=yes,
-+ jm_cv_func_mbrtowc=no)])
-+ if test $jm_cv_func_mbrtowc = yes; then
-+ AC_DEFINE(HAVE_MBRTOWC, 1,
-+ [Define to 1 if mbrtowc and mbstate_t are properly declared.])
-+ fi
-+])
-diff -urNd -urNd patch-2.5.4/m4/mbstate_t.m4 patch-2.5.9/m4/mbstate_t.m4
---- patch-2.5.4/m4/mbstate_t.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/mbstate_t.m4 2002-06-21 13:38:30.000000000 -0400
-@@ -0,0 +1,32 @@
-+# mbstate_t.m4 serial 9
-+dnl Copyright (C) 2000, 2001, 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+# From Paul Eggert.
-+
-+# BeOS 5 has <wchar.h> but does not define mbstate_t,
-+# so you can't declare an object of that type.
-+# Check for this incompatibility with Standard C.
-+
-+# AC_TYPE_MBSTATE_T
-+# -----------------
-+AC_DEFUN([AC_TYPE_MBSTATE_T],
-+ [AC_CACHE_CHECK([for mbstate_t], ac_cv_type_mbstate_t,
-+ [AC_COMPILE_IFELSE(
-+ [AC_LANG_PROGRAM(
-+ [AC_INCLUDES_DEFAULT
-+# include <wchar.h>],
-+ [mbstate_t x; return sizeof x;])],
-+ [ac_cv_type_mbstate_t=yes],
-+ [ac_cv_type_mbstate_t=no])])
-+ if test $ac_cv_type_mbstate_t = yes; then
-+ AC_DEFINE([HAVE_MBSTATE_T], 1,
-+ [Define to 1 if <wchar.h> declares mbstate_t.])
-+ else
-+ AC_DEFINE([mbstate_t], int,
-+ [Define to a type if <wchar.h> does not define.])
-+ fi])
-diff -urNd -urNd patch-2.5.4/m4/memchr.m4 patch-2.5.9/m4/memchr.m4
---- patch-2.5.4/m4/memchr.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/memchr.m4 2002-12-31 08:42:07.000000000 -0500
-@@ -0,0 +1,21 @@
-+# memchr.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_FUNC_MEMCHR],
-+[
-+ AC_REPLACE_FUNCS(memchr)
-+ if test $ac_cv_func_memchr = no; then
-+ jm_PREREQ_MEMCHR
-+ fi
-+])
-+
-+# Prerequisites of lib/memchr.c.
-+AC_DEFUN([jm_PREREQ_MEMCHR], [
-+ AC_CHECK_HEADERS_ONCE(limits.h stdlib.h)
-+ AC_CHECK_HEADERS(bp-sym.h)
-+])
-diff -urNd -urNd patch-2.5.4/m4/mkdir.m4 patch-2.5.9/m4/mkdir.m4
---- patch-2.5.4/m4/mkdir.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/mkdir.m4 2002-05-24 14:47:37.000000000 -0400
-@@ -0,0 +1,34 @@
-+#serial 1
-+
-+dnl From Mumit Khan and Paul Eggert
-+dnl Determine whether mkdir accepts only one argument instead of the usual two.
-+
-+AC_DEFUN([PATCH_FUNC_MKDIR_TAKES_ONE_ARG],
-+ [AC_CHECK_FUNCS(mkdir)
-+ AC_CACHE_CHECK([whether mkdir takes only one argument],
-+ patch_cv_mkdir_takes_one_arg,
-+ [patch_cv_mkdir_takes_one_arg=no
-+ if test $ac_cv_func_mkdir = yes; then
-+ AC_TRY_COMPILE([
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+ ],
-+ [mkdir (".", 0);],
-+ ,
-+ [AC_TRY_COMPILE([
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+ ],
-+ [mkdir (".");],
-+ patch_cv_mkdir_takes_one_arg=yes
-+ )]
-+ )
-+ fi
-+ ]
-+ )
-+ if test $patch_cv_mkdir_takes_one_arg = yes; then
-+ AC_DEFINE([MKDIR_TAKES_ONE_ARG], 1,
-+ [Define if mkdir takes only one argument.])
-+ fi
-+ ]
-+)
-diff -urNd -urNd patch-2.5.4/m4/onceonly.m4 patch-2.5.9/m4/onceonly.m4
---- patch-2.5.4/m4/onceonly.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/onceonly.m4 2003-03-18 05:08:34.000000000 -0500
-@@ -0,0 +1,63 @@
-+# onceonly.m4 serial 3
-+dnl Copyright (C) 2002, 2003 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+dnl This file defines some "once only" variants of standard autoconf macros.
-+dnl AC_CHECK_HEADERS_ONCE like AC_CHECK_HEADERS
-+dnl AC_CHECK_FUNCS_ONCE like AC_CHECK_FUNCS
-+dnl AC_CHECK_DECLS_ONCE like AC_CHECK_DECLS
-+dnl AC_REQUIRE([AC_HEADER_STDC]) like AC_HEADER_STDC
-+dnl The advantage is that the check for each of the headers/functions/decls
-+dnl will be put only once into the 'configure' file. It keeps the size of
-+dnl the 'configure' file down, and avoids redundant output when 'configure'
-+dnl is run.
-+dnl The drawback is that the checks cannot be conditionalized. If you write
-+dnl if some_condition; then gl_CHECK_HEADERS(stdlib.h); fi
-+dnl inside an AC_DEFUNed function, the gl_CHECK_HEADERS macro call expands to
-+dnl empty, and the check will be inserted before the body of the AC_DEFUNed
-+dnl function.
-+
-+dnl Autoconf version 2.57 or newer is recommended.
-+AC_PREREQ(2.54)
-+
-+# AC_CHECK_HEADERS_ONCE(HEADER1 HEADER2 ...) is a once-only variant of
-+# AC_CHECK_HEADERS(HEADER1 HEADER2 ...).
-+AC_DEFUN([AC_CHECK_HEADERS_ONCE], [
-+ :
-+ AC_FOREACH([gl_HEADER_NAME], [$1], [
-+ AC_DEFUN([gl_CHECK_HEADER_]m4_quote(translit(m4_defn([gl_HEADER_NAME]),
-+ [-./], [___])), [
-+ AC_CHECK_HEADERS(gl_HEADER_NAME)
-+ ])
-+ AC_REQUIRE([gl_CHECK_HEADER_]m4_quote(translit(gl_HEADER_NAME,
-+ [-./], [___])))
-+ ])
-+])
-+
-+# AC_CHECK_FUNCS_ONCE(FUNC1 FUNC2 ...) is a once-only variant of
-+# AC_CHECK_FUNCS(FUNC1 FUNC2 ...).
-+AC_DEFUN([AC_CHECK_FUNCS_ONCE], [
-+ :
-+ AC_FOREACH([gl_FUNC_NAME], [$1], [
-+ AC_DEFUN([gl_CHECK_FUNC_]m4_defn([gl_FUNC_NAME]), [
-+ AC_CHECK_FUNCS(m4_defn([gl_FUNC_NAME]))
-+ ])
-+ AC_REQUIRE([gl_CHECK_FUNC_]m4_defn([gl_FUNC_NAME]))
-+ ])
-+])
-+
-+# AC_CHECK_DECLS_ONCE(DECL1 DECL2 ...) is a once-only variant of
-+# AC_CHECK_DECLS(DECL1, DECL2, ...).
-+AC_DEFUN([AC_CHECK_DECLS_ONCE], [
-+ :
-+ AC_FOREACH([gl_DECL_NAME], [$1], [
-+ AC_DEFUN([gl_CHECK_DECL_]m4_defn([gl_DECL_NAME]), [
-+ AC_CHECK_DECLS(m4_defn([gl_DECL_NAME]))
-+ ])
-+ AC_REQUIRE([gl_CHECK_DECL_]m4_defn([gl_DECL_NAME]))
-+ ])
-+])
-diff -urNd -urNd patch-2.5.4/m4/protos.m4 patch-2.5.9/m4/protos.m4
---- patch-2.5.4/m4/protos.m4 1998-10-05 00:29:36.000000000 -0400
-+++ patch-2.5.9/m4/protos.m4 1969-12-31 19:00:00.000000000 -0500
-@@ -1,25 +0,0 @@
--## ------------------------------- ##
--## Check for function prototypes. ##
--## From Franc,ois Pinard ##
--## ------------------------------- ##
--
--# serial 1
--
--AC_DEFUN(AM_C_PROTOTYPES,
--[AC_REQUIRE([AM_PROG_CC_STDC])
--AC_REQUIRE([AC_PROG_CPP])
--AC_MSG_CHECKING([for function prototypes])
--if test "$am_cv_prog_cc_stdc" != no; then
-- AC_MSG_RESULT(yes)
-- AC_DEFINE(PROTOTYPES,1,[Define if compiler has function prototypes])
-- U= ANSI2KNR=
--else
-- AC_MSG_RESULT(no)
-- U=_ ANSI2KNR=./ansi2knr
-- # Ensure some checks needed by ansi2knr itself.
-- AC_HEADER_STDC
-- AC_CHECK_HEADERS(string.h)
--fi
--AC_SUBST(U)dnl
--AC_SUBST(ANSI2KNR)dnl
--])
-diff -urNd -urNd patch-2.5.4/m4/quotearg.m4 patch-2.5.9/m4/quotearg.m4
---- patch-2.5.4/m4/quotearg.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/quotearg.m4 2002-12-31 08:42:07.000000000 -0500
-@@ -0,0 +1,16 @@
-+# quotearg.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_QUOTEARG],
-+[
-+ dnl Prerequisites of lib/quotearg.c.
-+ AC_CHECK_HEADERS_ONCE(wchar.h wctype.h)
-+ AC_CHECK_FUNCS_ONCE(iswprint mbsinit)
-+ AC_TYPE_MBSTATE_T
-+ jm_FUNC_MBRTOWC
-+])
-diff -urNd -urNd patch-2.5.4/m4/quote.m4 patch-2.5.9/m4/quote.m4
---- patch-2.5.4/m4/quote.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/quote.m4 2002-12-31 08:42:07.000000000 -0500
-@@ -0,0 +1,13 @@
-+# quote.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_QUOTE],
-+[
-+ dnl Prerequisites of lib/quote.c.
-+ AC_CHECK_HEADERS_ONCE(stddef.h)
-+])
-diff -urNd -urNd patch-2.5.4/m4/realloc.m4 patch-2.5.9/m4/realloc.m4
---- patch-2.5.4/m4/realloc.m4 1999-02-07 00:36:21.000000000 -0500
-+++ patch-2.5.9/m4/realloc.m4 2002-12-31 08:43:06.000000000 -0500
-@@ -1,35 +1,25 @@
--#serial 3
-+# realloc.m4 serial 7
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-
- dnl From Jim Meyering.
- dnl Determine whether realloc works when both arguments are 0.
- dnl If it doesn't, arrange to use the replacement function.
--dnl
-
--AC_DEFUN(jm_FUNC_REALLOC,
-+AC_DEFUN([jm_FUNC_REALLOC],
- [
-- dnl xmalloc.c requires that this symbol be defined so it doesn't
-- dnl mistakenly use a broken realloc -- as it might if this test were omitted.
-- AC_DEFINE_UNQUOTED(HAVE_DONE_WORKING_REALLOC_CHECK, 1,
-- [Define if the realloc check has been performed. ])
--
-- AC_CACHE_CHECK([for working realloc], jm_cv_func_working_realloc,
-- [AC_TRY_RUN([
-- char *realloc ();
-- int
-- main ()
-- {
-- exit (realloc (0, 0) ? 0 : 1);
-- }
-- ],
-- jm_cv_func_working_realloc=yes,
-- jm_cv_func_working_realloc=no,
-- dnl When crosscompiling, assume realloc is broken.
-- jm_cv_func_working_realloc=no)
-- ])
-- if test $jm_cv_func_working_realloc = no; then
-- AC_SUBST(LIBOBJS)
-- LIBOBJS="$LIBOBJS realloc.$ac_objext"
-- AC_DEFINE_UNQUOTED(realloc, rpl_realloc,
-- [Define to rpl_realloc if the replacement function should be used.])
-+ AC_REQUIRE([AC_FUNC_REALLOC])
-+ dnl autoconf < 2.57 used the symbol ac_cv_func_realloc_works.
-+ if test X"$ac_cv_func_realloc_0_nonnull" = Xno || test X"$ac_cv_func_realloc_works" = Xno; then
-+ gl_PREREQ_REALLOC
- fi
- ])
-+
-+# Prerequisites of lib/realloc.c.
-+AC_DEFUN([gl_PREREQ_REALLOC], [
-+ :
-+])
-diff -urNd -urNd patch-2.5.4/m4/rmdir.m4 patch-2.5.9/m4/rmdir.m4
---- patch-2.5.4/m4/rmdir.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/rmdir.m4 2002-12-31 08:42:07.000000000 -0500
-@@ -0,0 +1,22 @@
-+# rmdir.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_FUNC_RMDIR],
-+[
-+ AC_REPLACE_FUNCS(rmdir)
-+ if test $ac_cv_func_rmdir = no; then
-+ gl_PREREQ_RMDIR
-+ fi
-+])
-+
-+# Prerequisites of lib/rmdir.c.
-+AC_DEFUN([gl_PREREQ_RMDIR], [
-+ AC_REQUIRE([AC_HEADER_STAT])
-+ :
-+])
-+
-diff -urNd -urNd patch-2.5.4/m4/setmode.m4 patch-2.5.9/m4/setmode.m4
---- patch-2.5.4/m4/setmode.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/setmode.m4 2002-02-27 23:22:13.000000000 -0500
-@@ -0,0 +1,38 @@
-+# Check for setmode, DOS style.
-+
-+# Copyright (C) 2001, 2002 Free Software Foundation, Inc.
-+
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+# 02111-1307, USA.
-+
-+AC_DEFUN([AC_FUNC_SETMODE_DOS],
-+ [AC_CHECK_HEADERS(fcntl.h unistd.h)
-+ AC_CACHE_CHECK([for DOS-style setmode],
-+ [ac_cv_func_setmode_dos],
-+ [AC_TRY_LINK(
-+ [#include <io.h>
-+ #if HAVE_FCNTL_H
-+ # include <fcntl.h>
-+ #endif
-+ #if HAVE_UNISTD_H
-+ # include <unistd.h>
-+ #endif],
-+ [int ret = setmode && setmode (1, O_BINARY);],
-+ [ac_cv_func_setmode_dos=yes],
-+ [ac_cv_func_setmode_dos=no])])
-+ if test $ac_cv_func_setmode_dos = yes; then
-+ AC_DEFINE(HAVE_SETMODE_DOS, 1,
-+ [Define to 1 if you have the DOS-style `setmode' function.])
-+ fi])
-diff -urNd -urNd patch-2.5.4/m4/stdbool.m4 patch-2.5.9/m4/stdbool.m4
---- patch-2.5.4/m4/stdbool.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/stdbool.m4 2003-01-09 08:35:14.000000000 -0500
-@@ -0,0 +1,89 @@
-+# Check for stdbool.h that conforms to C99.
-+
-+# Copyright (C) 2002-2003 Free Software Foundation, Inc.
-+
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+# 02111-1307, USA.
-+
-+# Prepare for substituting <stdbool.h> if it is not supported.
-+
-+AC_DEFUN([AM_STDBOOL_H],
-+[
-+ AC_REQUIRE([AC_HEADER_STDBOOL])
-+
-+ # Define two additional variables used in the Makefile substitution.
-+
-+ if test "$ac_cv_header_stdbool_h" = yes; then
-+ STDBOOL_H=''
-+ else
-+ STDBOOL_H='stdbool.h'
-+ fi
-+ AC_SUBST([STDBOOL_H])
-+
-+ if test "$ac_cv_type__Bool" = yes; then
-+ HAVE__BOOL=1
-+ else
-+ HAVE__BOOL=0
-+ fi
-+ AC_SUBST([HAVE__BOOL])
-+])
-+
-+# This macro is only needed in autoconf <= 2.54. Newer versions of autoconf
-+# have this macro built-in.
-+
-+AC_DEFUN([AC_HEADER_STDBOOL],
-+ [AC_CACHE_CHECK([for stdbool.h that conforms to C99],
-+ [ac_cv_header_stdbool_h],
-+ [AC_TRY_COMPILE(
-+ [
-+ #include <stdbool.h>
-+ #ifndef bool
-+ "error: bool is not defined"
-+ #endif
-+ #ifndef false
-+ "error: false is not defined"
-+ #endif
-+ #if false
-+ "error: false is not 0"
-+ #endif
-+ #ifndef true
-+ "error: false is not defined"
-+ #endif
-+ #if true != 1
-+ "error: true is not 1"
-+ #endif
-+ #ifndef __bool_true_false_are_defined
-+ "error: __bool_true_false_are_defined is not defined"
-+ #endif
-+
-+ struct s { _Bool s: 1; _Bool t; } s;
-+
-+ char a[true == 1 ? 1 : -1];
-+ char b[false == 0 ? 1 : -1];
-+ char c[__bool_true_false_are_defined == 1 ? 1 : -1];
-+ char d[(bool) -0.5 == true ? 1 : -1];
-+ bool e = &s;
-+ char f[(_Bool) -0.0 == false ? 1 : -1];
-+ char g[true];
-+ char h[sizeof (_Bool)];
-+ char i[sizeof s.t];
-+ ],
-+ [ return !a + !b + !c + !d + !e + !f + !g + !h + !i; ],
-+ [ac_cv_header_stdbool_h=yes],
-+ [ac_cv_header_stdbool_h=no])])
-+ AC_CHECK_TYPES([_Bool])
-+ if test $ac_cv_header_stdbool_h = yes; then
-+ AC_DEFINE(HAVE_STDBOOL_H, 1, [Define to 1 if stdbool.h conforms to C99.])
-+ fi])
-diff -urNd -urNd patch-2.5.4/m4/unlocked-io.m4 patch-2.5.9/m4/unlocked-io.m4
---- patch-2.5.4/m4/unlocked-io.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/unlocked-io.m4 2002-12-31 08:42:07.000000000 -0500
-@@ -0,0 +1,22 @@
-+#serial 7 -*- autoconf -*-
-+
-+dnl From Jim Meyering.
-+dnl
-+dnl See if the glibc *_unlocked I/O macros or functions are available.
-+dnl Use only those *_unlocked macros or functions that are declared
-+dnl (because some of them were declared in Solaris 2.5.1 but were removed
-+dnl in Solaris 2.6, whereas we want binaries built on Solaris 2.5.1 to run
-+dnl on Solaris 2.6).
-+
-+AC_DEFUN([jm_FUNC_GLIBC_UNLOCKED_IO],
-+[
-+ dnl Persuade glibc <stdio.h> to declare fgets_unlocked(), fputs_unlocked()
-+ dnl etc.
-+ AC_REQUIRE([AC_GNU_SOURCE])
-+
-+ AC_CHECK_DECLS_ONCE(
-+ [clearerr_unlocked feof_unlocked ferror_unlocked
-+ fflush_unlocked fgets_unlocked fputc_unlocked fputs_unlocked
-+ fread_unlocked fwrite_unlocked getc_unlocked
-+ getchar_unlocked putc_unlocked putchar_unlocked])
-+])
-diff -urNd -urNd patch-2.5.4/m4/utimbuf.m4 patch-2.5.9/m4/utimbuf.m4
---- patch-2.5.4/m4/utimbuf.m4 1999-01-10 17:51:01.000000000 -0500
-+++ patch-2.5.9/m4/utimbuf.m4 2002-12-31 08:43:06.000000000 -0500
-@@ -1,4 +1,4 @@
--#serial 2
-+#serial 5
-
- dnl From Jim Meyering
-
-@@ -6,9 +6,9 @@
- dnl usually in <utime.h>.
- dnl Some systems have utime.h but don't declare the struct anywhere.
-
--AC_DEFUN(jm_STRUCT_UTIMBUF,
-+AC_DEFUN([jm_CHECK_TYPE_STRUCT_UTIMBUF],
- [
-- AC_CHECK_HEADERS(utime.h)
-+ AC_CHECK_HEADERS_ONCE(sys/time.h utime.h)
- AC_REQUIRE([AC_HEADER_TIME])
- AC_CACHE_CHECK([for struct utimbuf], fu_cv_sys_struct_utimbuf,
- [AC_TRY_COMPILE(
-@@ -33,8 +33,8 @@
- ])
-
- if test $fu_cv_sys_struct_utimbuf = yes; then
-- AC_DEFINE_UNQUOTED(HAVE_STRUCT_UTIMBUF, 1,
--[Define if struct utimbuf is declared -- usually in <utime.h>.
-- Some systems have utime.h but don't declare the struct anywhere. ])
-+ AC_DEFINE(HAVE_STRUCT_UTIMBUF, 1,
-+ [Define if struct utimbuf is declared -- usually in <utime.h>.
-+ Some systems have utime.h but don't declare the struct anywhere. ])
- fi
- ])
-diff -urNd -urNd patch-2.5.4/m4/xalloc.m4 patch-2.5.9/m4/xalloc.m4
---- patch-2.5.4/m4/xalloc.m4 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/m4/xalloc.m4 2002-12-31 08:42:07.000000000 -0500
-@@ -0,0 +1,26 @@
-+# xalloc.m4 serial 1
-+dnl Copyright (C) 2002 Free Software Foundation, Inc.
-+dnl This file is free software, distributed under the terms of the GNU
-+dnl General Public License. As a special exception to the GNU General
-+dnl Public License, this file may be distributed as part of a program
-+dnl that contains a configuration script generated by Autoconf, under
-+dnl the same distribution terms as the rest of that program.
-+
-+AC_DEFUN([gl_XALLOC],
-+[
-+ gl_PREREQ_XMALLOC
-+ gl_PREREQ_XSTRDUP
-+])
-+
-+# Prerequisites of lib/xmalloc.c.
-+AC_DEFUN([gl_PREREQ_XMALLOC], [
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_REQUIRE([jm_FUNC_MALLOC])
-+ AC_REQUIRE([jm_FUNC_REALLOC])
-+])
-+
-+# Prerequisites of lib/xstrdup.c.
-+AC_DEFUN([gl_PREREQ_XSTRDUP], [
-+ AC_REQUIRE([AC_HEADER_STDC])
-+ AC_CHECK_HEADERS_ONCE(string.h)
-+])
-diff -urNd -urNd patch-2.5.4/Makefile.in patch-2.5.9/Makefile.in
---- patch-2.5.4/Makefile.in 1999-08-30 02:37:54.000000000 -0400
-+++ patch-2.5.9/Makefile.in 2003-05-20 12:15:48.000000000 -0400
-@@ -1,5 +1,7 @@
- # Makefile for GNU patch.
--# Copyright 1993, 1997-1998, 1999 Free Software Foundation, Inc.
-+
-+# Copyright (C) 1993, 1997, 1998, 1999, 2001, 2002, 2003 Free Software
-+# Foundation, Inc.
-
- # This program is free software; you can redistribute it and/or modify
- # it under the terms of the GNU General Public License as published by
-@@ -37,9 +39,9 @@
- LDFLAGS = @LDFLAGS@
- LIBOBJS = @LIBOBJS@
- LIBS = @LIBS@
--PACKAGE = @PACKAGE@
--U = @U@
--VERSION = @VERSION@
-+OBJEXT = @OBJEXT@
-+PACKAGE_NAME = @PACKAGE_NAME@
-+PACKAGE_VERSION = @PACKAGE_VERSION@
-
- prefix = @prefix@
- exec_prefix = @exec_prefix@
-@@ -59,20 +61,33 @@
-
- SHELL = /bin/sh
-
--LIBSRCS = getopt.c getopt1.c malloc.c memchr.c realloc.c rename.c
--SRCS = addext.c argmatch.c backupfile.c basename.c error.c inp.c maketime.c \
-- mkdir.c partime.c patch.c pch.c quotearg.c quotesys.c \
-- rmdir.c util.c version.c xmalloc.c $(LIBSRCS)
--OBJS = addext$U.o argmatch$U.o backupfile$U.o basename$U.o error$U.o inp$U.o \
-- maketime.o partime.o patch$U.o pch$U.o quotearg$U.o quotesys.o \
-- util$U.o version$U.o xmalloc$U.o $(LIBOBJS)
--HDRS = argmatch.h backupfile.h basename.h common.h error.h getopt.h \
-- inp.h maketime.h partime.h patchlevel.h pch.h quotearg.h quotesys.h \
-- util.h version.h xalloc.h
-+LIBSRCS = error.c malloc.c memchr.c mkdir.c \
-+ realloc.c rmdir.c strcasecmp.c strncasecmp.c
-+SRCS = $(LIBSRCS) \
-+ addext.c argmatch.c backupfile.c \
-+ basename.c dirname.c \
-+ getopt.c getopt1.c inp.c \
-+ maketime.c partime.c \
-+ patch.c pch.c \
-+ quote.c quotearg.c quotesys.c \
-+ util.c version.c xmalloc.c
-+OBJS = $(LIBOBJS) \
-+ addext.$(OBJEXT) argmatch.$(OBJEXT) backupfile.$(OBJEXT) \
-+ basename.$(OBJEXT) dirname.$(OBJEXT) \
-+ getopt.$(OBJEXT) getopt1.$(OBJEXT) inp.$(OBJEXT) \
-+ maketime.$(OBJEXT) partime.$(OBJEXT) \
-+ patch.$(OBJEXT) pch.$(OBJEXT) \
-+ quote.$(OBJEXT) quotearg.$(OBJEXT) quotesys.$(OBJEXT) \
-+ util.$(OBJEXT) version.$(OBJEXT) xmalloc.$(OBJEXT)
-+HDRS = argmatch.h backupfile.h common.h dirname.h \
-+ error.h getopt.h gettext.h \
-+ inp.h maketime.h partime.h pch.h \
-+ quote.h quotearg.h quotesys.h \
-+ unlocked-io.h util.h version.h xalloc.h
- MISC = AUTHORS COPYING ChangeLog INSTALL Makefile.in NEWS README \
-- aclocal.m4 ansi2knr.1 ansi2knr.c \
-- config.guess config.hin config.sub configure configure.in \
-- install-sh mkinstalldirs patch.man
-+ aclocal.m4 \
-+ config.hin configure configure.ac \
-+ install-sh mkinstalldirs patch.man stdbool.h.in
- DISTFILES = $(MISC) $(SRCS) $(HDRS)
- DISTFILES_M4 = $(ACINCLUDE_INPUTS)
- DISTFILES_PC = pc/chdirsaf.c
-@@ -90,7 +105,7 @@
- COMPILE = $(CC) -c $(CPPFLAGS) $(DEFS) -Ded_PROGRAM=\"$(ed_PROGRAM)\" \
- -I. -I$(srcdir) $(CFLAGS)
-
--.c.o:
-+.c.$(OBJEXT):
- $(COMPILE) $<
-
- patch$(EXEEXT): $(OBJS)
-@@ -114,27 +129,46 @@
- $(SHELL) $(CONFIG_STATUS)
- config.status: configure
- $(SHELL) $(CONFIG_STATUS) --recheck
--configure: configure.in $(srcdir)/aclocal.m4
-+configure: configure.ac $(srcdir)/aclocal.m4
- cd $(srcdir) && autoconf
--config.hin: configure.in
-+config.hin: configure.ac $(srcdir)/aclocal.m4
- cd $(srcdir) && rm -f config.hin && autoheader
-+stdbool.h: stdbool.h.in
-+ sed -e 's/@''HAVE__BOOL''@/@HAVE__BOOL@/g' \
-+ <$(srcdir)/stdbool.h.in >stdbool.h
-
- M4DIR = $(srcdir)/m4
--ACINCLUDE_INPUTS = $(M4DIR)/ccstdc.m4 $(M4DIR)/d-ino.m4 \
-- $(M4DIR)/inttypes_h.m4 $(M4DIR)/largefile.m4 $(M4DIR)/malloc.m4 \
-- $(M4DIR)/protos.m4 $(M4DIR)/realloc.m4 $(M4DIR)/utimbuf.m4
-+ACINCLUDE_INPUTS = \
-+ $(M4DIR)/backupfile.m4 \
-+ $(M4DIR)/d-ino.m4 \
-+ $(M4DIR)/dirname.m4 \
-+ $(M4DIR)/dos.m4 \
-+ $(M4DIR)/error.m4 \
-+ $(M4DIR)/getopt.m4 \
-+ $(M4DIR)/malloc.m4 \
-+ $(M4DIR)/mbrtowc.m4 \
-+ $(M4DIR)/mbstate_t.m4 \
-+ $(M4DIR)/memchr.m4 \
-+ $(M4DIR)/mkdir.m4 \
-+ $(M4DIR)/onceonly.m4 \
-+ $(M4DIR)/quote.m4 \
-+ $(M4DIR)/quotearg.m4 \
-+ $(M4DIR)/realloc.m4 \
-+ $(M4DIR)/rmdir.m4 \
-+ $(M4DIR)/setmode.m4 \
-+ $(M4DIR)/stdbool.m4 \
-+ $(M4DIR)/unlocked-io.m4 \
-+ $(M4DIR)/utimbuf.m4 \
-+ $(M4DIR)/xalloc.m4
-
- $(srcdir)/aclocal.m4: $(ACINCLUDE_INPUTS)
- cat $(ACINCLUDE_INPUTS) >$(srcdir)/aclocal.m4
-
--patchlevel.h: configure.in
-- echo '#define PATCH_VERSION "$(VERSION)"' >patchlevel.h
--
--TAGS: $(HDRS) patchlevel.h $(SRCS)
-- etags $(HDRS) patchlevel.h $(SRCS)
-+TAGS: $(HDRS) $(SRCS)
-+ etags $(HDRS) $(SRCS)
-
- mostlyclean::
-- rm -f ansi2knr core* *core *.o *_.c
-+ rm -f core* *core *.$(OBJEXT) *_.c stdbool.h
-
- clean:: mostlyclean
- rm -f patch$(EXEEXT)
-@@ -148,7 +182,7 @@
- $(MAKE) distclean
- rm -f TAGS
-
--PV = $(PACKAGE)-$(VERSION)
-+PV = $(PACKAGE_NAME)-$(PACKAGE_VERSION)
-
- dist:: $(DISTFILES) $(DISTFILES_M4) $(DISTFILES_PC) $(DISTFILES_PC_DJGPP)
- rm -rf $(PV)
-@@ -160,31 +194,28 @@
- tar -chf - $(PV) | gzip -9 >$(PV).tar.gz
- rm -rf $(PV)
-
--ansi2knr.o: config.h
--ansi2knr: ansi2knr.o
-- $(CC) -o $@ $(CFLAGS) $(LDFLAGS) ansi2knr.o $(LIBS)
--addext_.c argmatch_.c backupfile_.c basename_.c error_.c \
--getopt_.c getopt1_.c inp_.c malloc_.c mkdir_.c patch_.c pch_.c quotearg_.c \
--rename_.c util_.c version_.c xmalloc_.c: ansi2knr
--.SUFFIXES: _.c
--.c_.c:
-- ./ansi2knr $< $@
--
- $(OBJS): config.h
--addext$U.o: backupfile.h
--argmatch$U.o: argmatch.h error.h quotearg.h
--backupfile$U.o: argmatch.h backupfile.h
--error$U.o: error.h
--getopt$U.o getopt1$U.o: getopt.h
--inp$U.o: backupfile.h common.h inp.h pch.h quotearg.h util.h xalloc.h
--maketime.o: maketime.h partime.h
--partime.o: partime.h
--patch$U.o: argmatch.h backupfile.h common.h getopt.h inp.h \
-+COMMON = common.h @STDBOOL_H@
-+addext.$(OBJEXT): backupfile.h dirname.h
-+argmatch.$(OBJEXT): argmatch.h gettext.h error.h \
-+ quote.h quotearg.h unlocked-io.h
-+backupfile.$(OBJEXT): argmatch.h backupfile.h dirname.h
-+basename.$(OBJEXT): dirname.h
-+dirname.$(OBJEXT): dirname.h xalloc.h
-+error.$(OBJEXT): error.h gettext.h unlocked-io.h
-+getopt.$(OBJEXT) getopt1.$(OBJEXT): getopt.h
-+inp.$(OBJEXT): backupfile.h $(COMMON) inp.h pch.h quotearg.h util.h xalloc.h
-+maketime.$(OBJEXT): maketime.h partime.h
-+mkdir.$(OBJEXT): dirname.h xalloc.h
-+partime.$(OBJEXT): partime.h
-+patch.$(OBJEXT): argmatch.h backupfile.h $(COMMON) getopt.h inp.h \
- pch.h quotearg.h util.h version.h xalloc.h
--pch$U.o: backupfile.h basename.h common.h inp.h pch.h quotearg.h util.h
--quotearg$U.o: quotearg.h xalloc.h
--quotesys.o: quotesys.h
--util$U.o: backupfile.h basename.h common.h maketime.h \
-+pch.$(OBJEXT): backupfile.h $(COMMON) dirname.h inp.h pch.h quotearg.h util.h
-+quote.$(OBJECT): quote.h quotearg.h
-+quotearg.$(OBJEXT): gettext.h quotearg.h xalloc.h
-+quotesys.$(OBJEXT): quotesys.h
-+strncasecmp.$(OBJEXT): strcasecmp.c
-+util.$(OBJEXT): backupfile.h $(COMMON) dirname.h maketime.h \
- partime.h quotearg.h quotesys.h util.h version.h xalloc.h
--version$U.o: common.h patchlevel.h util.h version.h
--xmalloc$U.o: xalloc.h
-+version.$(OBJEXT): $(COMMON) version.h
-+xmalloc.$(OBJEXT): error.h gettext.h xalloc.h
-diff -urNd -urNd patch-2.5.4/memchr.c patch-2.5.9/memchr.c
---- patch-2.5.4/memchr.c 1999-07-10 12:44:10.000000000 -0400
-+++ patch-2.5.9/memchr.c 2000-10-28 04:22:11.000000000 -0400
-@@ -1,4 +1,4 @@
--/* Copyright (C) 1991, 1993, 1997, 1999 Free Software Foundation, Inc.
-+/* Copyright (C) 1991,93,96,97,99,2000 Free Software Foundation, Inc.
- Based on strlen implementation by Torbjorn Granlund (tege at sics.se),
- with help from Dan Sahlin (dan at sics.se) and
- commentary by Jim Blandy (jimb at ai.mit.edu);
-@@ -34,11 +34,18 @@
- # define __ptr_t char *
- #endif /* C++ or ANSI C. */
-
--#if defined (_LIBC)
-+#if defined _LIBC
- # include <string.h>
-+# include <memcopy.h>
-+#else
-+# define reg_char char
- #endif
-
--#if defined (HAVE_LIMITS_H) || defined (_LIBC)
-+#if HAVE_STDLIB_H || defined _LIBC
-+# include <stdlib.h>
-+#endif
-+
-+#if HAVE_LIMITS_H || defined _LIBC
- # include <limits.h>
- #endif
-
-@@ -49,21 +56,28 @@
- #endif
-
- #include <sys/types.h>
-+#if HAVE_BP_SYM_H || defined _LIBC
-+# include <bp-sym.h>
-+#else
-+# define BP_SYM(sym) sym
-+#endif
-
-+#undef memchr
-+#undef __memchr
-
- /* Search no more than N bytes of S for C. */
--
- __ptr_t
--memchr (s, c, n)
-+__memchr (s, c_in, n)
- const __ptr_t s;
-- int c;
-+ int c_in;
- size_t n;
- {
- const unsigned char *char_ptr;
- const unsigned long int *longword_ptr;
- unsigned long int longword, magic_bits, charmask;
-+ unsigned reg_char c;
-
-- c = (unsigned char) c;
-+ c = (unsigned char) c_in;
-
- /* Handle the first few characters by reading one character at a time.
- Do this until CHAR_PTR is aligned on a longword boundary. */
-@@ -197,3 +211,6 @@
-
- return 0;
- }
-+#ifdef weak_alias
-+weak_alias (__memchr, BP_SYM (memchr))
-+#endif
-diff -urNd -urNd patch-2.5.4/mkdir.c patch-2.5.9/mkdir.c
---- patch-2.5.4/mkdir.c 1999-04-26 08:16:14.000000000 -0400
-+++ patch-2.5.9/mkdir.c 2001-09-16 08:42:14.000000000 -0400
-@@ -1,5 +1,6 @@
--/* BSD compatible make directory function for System V
-- Copyright (C) 1988, 1990, 1998 Free Software Foundation, Inc.
-+/* On some systems, mkdir ("foo/", 0700) fails because of the trailing
-+ slash. On those systems, this wrapper removes the trailing slash.
-+ Copyright (C) 2001 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -15,94 +16,61 @@
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
--#if HAVE_CONFIG_H
--# include <config.h>
--#endif
-+/* written by Jim Meyering */
-+
-+#include <config.h>
-+
-+/* Disable the definition of mkdir to rpl_mkdir (from config.h) in this
-+ file. Otherwise, we'd get conflicting prototypes for rpl_mkdir on
-+ most systems. */
-+#undef mkdir
-
- #include <sys/types.h>
- #include <sys/stat.h>
--#include <errno.h>
--#ifndef errno
--extern int errno;
-+#include <stdio.h>
-+#if HAVE_STDLIB_H
-+# include <stdlib.h>
- #endif
-
--#if STAT_MACROS_BROKEN
--# undef S_ISDIR
-+#if HAVE_STRING_H
-+# include <string.h>
-+#else
-+# include <strings.h>
- #endif
-
--#if !defined(S_ISDIR) && defined(S_IFDIR)
--# define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
--#endif
-+#include "dirname.h"
-+#include "xalloc.h"
-
--#ifndef S_IRWXU
--# define S_IRWXU 0700
--#endif
--#ifndef S_IRWXG
--# define S_IRWXG 0070
-+#ifndef HAVE_DECL_FREE
-+"this configure-time declaration test was not run"
- #endif
--#ifndef S_IRWXO
--# define S_IRWXO 0007
-+#if !HAVE_DECL_FREE
-+void free ();
- #endif
-
--/* mkdir adapted from GNU tar. */
--
--/* Make directory DPATH, with permission mode DMODE.
--
-- Written by Robert Rother, Mariah Corporation, August 1985
-- (sdcsvax!rmr or rmr at uscd). If you want it, it's yours.
--
-- Severely hacked over by John Gilmore to make a 4.2BSD compatible
-- subroutine. 11Mar86; hoptoad!gnu
--
-- Modified by rmtodd at uokmax 6-28-87 -- when making an already existing dir,
-- subroutine didn't return EEXIST. It does now. */
-+/* This function is required at least for NetBSD 1.5.2. */
-
- int
--mkdir (const char *dpath, mode_t dmode)
-+rpl_mkdir (char const *dir, mode_t mode)
- {
-- pid_t cpid;
-- mode_t mode;
-- int status;
-- struct stat statbuf;
-+ int ret_val;
-+ char *tmp_dir;
-+ size_t len = strlen (dir);
-
-- if (stat (dpath, &statbuf) == 0)
-+ if (len && dir[len - 1] == '/')
- {
-- errno = EEXIST; /* stat worked, so it already exists. */
-- return -1;
-+ tmp_dir = xstrdup (dir);
-+ strip_trailing_slashes (tmp_dir);
- }
--
-- /* If stat fails for a reason other than non-existence, return error. */
-- if (errno != ENOENT)
-- return -1;
--
-- cpid = fork ();
-- switch (cpid)
-+ else
- {
-- case -1: /* Cannot fork. */
-- return -1; /* errno is already set. */
-+ tmp_dir = (char *) dir;
-+ }
-
-- case 0: /* Child process. */
-- /* Cheap hack to set mode of new directory. Since this child
-- process is going away anyway, we zap its umask.
-- This won't suffice to set SUID, SGID, etc. on this
-- directory, so the parent process calls chmod afterward. */
-- mode = umask (0); /* Get current umask. */
-- /* Set for mkdir. */
-- umask (mode | ((S_IRWXU | S_IRWXG | S_IRWXO) & ~dmode));
-- execl ("/bin/mkdir", "mkdir", dpath, (char *) 0);
-- _exit (1);
-+ ret_val = mkdir (tmp_dir, mode);
-
-- default: /* Parent process. */
-- /* Wait for kid to finish. */
-- while (wait (&status) != cpid)
-- /* Do nothing. */ ;
-+ if (tmp_dir != dir)
-+ free (tmp_dir);
-
-- if (status)
-- {
-- /* /bin/mkdir failed. */
-- errno = EIO;
-- return -1;
-- }
-- return chmod (dpath, dmode);
-- }
-+ return ret_val;
- }
-diff -urNd -urNd patch-2.5.4/mkinstalldirs patch-2.5.9/mkinstalldirs
---- patch-2.5.4/mkinstalldirs 1999-01-05 08:29:06.000000000 -0500
-+++ patch-2.5.9/mkinstalldirs 2002-09-02 11:10:52.000000000 -0400
-@@ -4,9 +4,53 @@
- # Created: 1993-05-16
- # Public domain
-
--# $Id: mkinstalldirs,v 1.12.2.1 1998/12/26 17:32:14 bje Exp $
--
- errstatus=0
-+dirmode=""
-+
-+usage="\
-+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-+
-+# process command line arguments
-+while test $# -gt 0 ; do
-+ case "${1}" in
-+ -h | --help | --h* ) # -h for help
-+ echo "${usage}" 1>&2; exit 0 ;;
-+ -m ) # -m PERM arg
-+ shift
-+ test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
-+ dirmode="${1}"
-+ shift ;;
-+ -- ) shift; break ;; # stop option processing
-+ -* ) echo "${usage}" 1>&2; exit 1 ;; # unknown option
-+ * ) break ;; # first non-opt arg
-+ esac
-+done
-+
-+for file
-+do
-+ if test -d "$file"; then
-+ shift
-+ else
-+ break
-+ fi
-+done
-+
-+case $# in
-+0) exit 0 ;;
-+esac
-+
-+case $dirmode in
-+'')
-+ if mkdir -p -- . 2>/dev/null; then
-+ echo "mkdir -p -- $*"
-+ exec mkdir -p -- "$@"
-+ fi ;;
-+*)
-+ if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
-+ echo "mkdir -m $dirmode -p -- $*"
-+ exec mkdir -m "$dirmode" -p -- "$@"
-+ fi ;;
-+esac
-
- for file
- do
-@@ -22,13 +66,24 @@
- esac
-
- if test ! -d "$pathcomp"; then
-- echo "mkdir $pathcomp"
-+ echo "mkdir $pathcomp"
-
-- mkdir "$pathcomp" || lasterr=$?
-+ mkdir "$pathcomp" || lasterr=$?
-
-- if test ! -d "$pathcomp"; then
-- errstatus=$lasterr
-- fi
-+ if test ! -d "$pathcomp"; then
-+ errstatus=$lasterr
-+ else
-+ if test ! -z "$dirmode"; then
-+ echo "chmod $dirmode $pathcomp"
-+
-+ lasterr=""
-+ chmod "$dirmode" "$pathcomp" || lasterr=$?
-+
-+ if test ! -z "$lasterr"; then
-+ errstatus=$lasterr
-+ fi
-+ fi
-+ fi
- fi
-
- pathcomp="$pathcomp/"
-@@ -37,4 +92,8 @@
-
- exit $errstatus
-
-+# Local Variables:
-+# mode: shell-script
-+# sh-indentation: 3
-+# End:
- # mkinstalldirs ends here
-diff -urNd -urNd patch-2.5.4/NEWS patch-2.5.9/NEWS
---- patch-2.5.4/NEWS 1998-03-20 21:51:32.000000000 -0500
-+++ patch-2.5.9/NEWS 2003-05-18 04:40:54.000000000 -0400
-@@ -1,9 +1,23 @@
--Known problems:
-+Changes in versions 2.5.8 and 2.5.9: bug fixes only.
-
--* The diffutils 2.7 documentation for `patch' is obsolete; this should be
-- fixed in diffutils 2.8. Until then, see `patch --help' or `man patch'.
--
--Changes since version 2.5:
-+Changes in version 2.5.7:
-+
-+* patch -D now outputs preprocessor lines without comments, as required
-+ by POSIX 1003.1-2001.
-+
-+Changes in version 2.5.6:
-+
-+* File names in context patches may now contain spaces, so long
-+ as the context patch headers use a tab to separate the file name
-+ from the time stamp.
-+* Perforce is now supported.
-+* Patch lines beginning with "#" are comments and are ignored.
-+
-+Changes in version 2.5.5:
-+
-+* The bug reporting address is now <bug-patch at gnu.org>.
-+
-+Changes in version 2.5.4:
-
- * A security hole has been closed.
- It involved race conditions with temporary files.
-@@ -19,6 +33,9 @@
- * `patch' now ignores trailing carriage returns in lines of context diffs
- if the context diff headers end in carriage return.
-
-+* `patch' now ignores context diff header file names that have fewer slashes
-+ than the count specified by the -p or --strip option.
-+
- * New options:
- --posix
- --quoting-style=WORD
-@@ -196,3 +213,25 @@
- being patched.
- * Print the system error message when system calls fail.
- * Fixed various bugs and portability problems.
-+
-+
-+
-+Copyright (C) 1992, 1993, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-+Free Software Foundation, Inc.
-+
-+This file is part of GNU Patch.
-+
-+This program is free software; you can redistribute it and/or modify
-+it under the terms of the GNU General Public License as published by
-+the Free Software Foundation; either version 2, or (at your option)
-+any later version.
-+
-+This program is distributed in the hope that they will be useful,
-+but WITHOUT ANY WARRANTY; without even the implied warranty of
-+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+GNU General Public License for more details.
-+
-+You should have received a copy of the GNU General Public License
-+along with this program; see the file COPYING. If not, write to
-+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-+Boston, MA 02111-1307, USA.
-diff -urNd -urNd patch-2.5.4/partime.c patch-2.5.9/partime.c
---- patch-2.5.4/partime.c 1998-03-15 10:48:53.000000000 -0500
-+++ patch-2.5.9/partime.c 2002-02-18 02:42:58.000000000 -0500
-@@ -1,6 +1,6 @@
- /* Parse a string, yielding a struct partime that describes it. */
-
--/* Copyright 1993, 1994, 1995, 1997 Paul Eggert
-+/* Copyright (C) 1993, 1994, 1995, 1997, 2002 Paul Eggert
- Distributed under license by the Free Software Foundation, Inc.
-
- This file is part of RCS.
-@@ -75,7 +75,7 @@
- #include <partime.h>
-
- char const partime_id[] =
-- "$Id: partime.c,v 5.18 1998/03/15 15:48:53 eggert Exp $";
-+ "$Id: partime.c,v 1.2 2002/02/18 07:42:58 eggert Exp $";
-
-
- /* Lookup tables for names of months, weekdays, time zones. */
-@@ -791,7 +791,7 @@
- return 0;
- if (negative)
- n = -n;
-- while (!ISALNUM ((unsigned char) *s))
-+ while (! ISALNUM ((unsigned char) *s) && *s)
- s++;
- i = lookup (s, relative_units);
- if (!TM_DEFINED (i))
-diff -urNd -urNd patch-2.5.4/patch.c patch-2.5.9/patch.c
---- patch-2.5.4/patch.c 1999-08-30 02:20:08.000000000 -0400
-+++ patch-2.5.9/patch.c 2003-05-20 09:55:03.000000000 -0400
-@@ -1,9 +1,11 @@
- /* patch - a program to apply diffs to original files */
-
--/* $Id: patch.c,v 1.28 1999/08/30 06:20:08 eggert Exp $ */
-+/* $Id: patch.c,v 1.44 2003/05/20 13:55:03 eggert Exp $ */
-
--/* Copyright 1984, 1985-1987, 1988 Larry Wall
-- Copyright 1989, 1990-1993, 1997-1998, 1999 Free Software Foundation, Inc.
-+/* Copyright (C) 1984, 1985, 1986, 1987, 1988 Larry Wall
-+
-+ Copyright (C) 1989, 1990, 1991, 1992, 1993, 1997, 1998, 1999, 2002,
-+ 2003 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -50,47 +52,47 @@
- struct outstate
- {
- FILE *ofp;
-- int after_newline;
-- int zero_output;
-+ bool after_newline;
-+ bool zero_output;
- };
-
- /* procedures */
-
--static FILE *create_output_file PARAMS ((char const *, int));
--static LINENUM locate_hunk PARAMS ((LINENUM));
--static bool apply_hunk PARAMS ((struct outstate *, LINENUM));
--static bool copy_till PARAMS ((struct outstate *, LINENUM));
--static bool patch_match PARAMS ((LINENUM, LINENUM, LINENUM, LINENUM));
--static bool similar PARAMS ((char const *, size_t, char const *, size_t));
--static bool spew_output PARAMS ((struct outstate *));
--static char const *make_temp PARAMS ((int));
--static int numeric_string PARAMS ((char const *, int, char const *));
--static void abort_hunk PARAMS ((void));
--static void cleanup PARAMS ((void));
--static void get_some_switches PARAMS ((void));
--static void init_output PARAMS ((char const *, int, struct outstate *));
--static void init_reject PARAMS ((void));
--static void reinitialize_almost_everything PARAMS ((void));
--static void remove_if_needed PARAMS ((char const *, int volatile *));
--static void usage PARAMS ((FILE *, int)) __attribute__((noreturn));
-+static FILE *create_output_file (char const *, int);
-+static LINENUM locate_hunk (LINENUM);
-+static bool apply_hunk (struct outstate *, LINENUM);
-+static bool copy_till (struct outstate *, LINENUM);
-+static bool patch_match (LINENUM, LINENUM, LINENUM, LINENUM);
-+static bool similar (char const *, size_t, char const *, size_t);
-+static bool spew_output (struct outstate *);
-+static char const *make_temp (char);
-+static int numeric_string (char const *, bool, char const *);
-+static void abort_hunk (void);
-+static void cleanup (void);
-+static void get_some_switches (void);
-+static void init_output (char const *, int, struct outstate *);
-+static void init_reject (void);
-+static void reinitialize_almost_everything (void);
-+static void remove_if_needed (char const *, int volatile *);
-+static void usage (FILE *, int) __attribute__((noreturn));
-
--static int make_backups;
--static int backup_if_mismatch;
-+static bool make_backups;
-+static bool backup_if_mismatch;
- static char const *version_control;
- static char const *version_control_context;
--static int remove_empty_files;
-+static bool remove_empty_files;
-
--/* TRUE if -R was specified on command line. */
--static int reverse_flag_specified;
-+/* true if -R was specified on command line. */
-+static bool reverse_flag_specified;
-
- /* how many input lines have been irretractably output */
- static LINENUM last_frozen_line;
-
- static char const *do_defines; /* symbol to patch using ifdef, ifndef, etc. */
- static char const if_defined[] = "\n#ifdef %s\n";
--static char const not_defined[] = "#ifndef %s\n";
-+static char const not_defined[] = "\n#ifndef %s\n";
- static char const else_defined[] = "\n#else\n";
--static char const end_defined[] = "\n#endif /* %s */\n";
-+static char const end_defined[] = "\n#endif\n";
-
- static int Argc;
- static char * const *Argv;
-@@ -107,20 +109,18 @@
-
- static char serrbuf[BUFSIZ];
-
--char const program_name[] = "patch";
--
- /* Apply a set of diffs as appropriate. */
-
--int main PARAMS ((int, char **));
--
- int
- main (int argc, char **argv)
- {
- char const *val;
-- bool somefailed = FALSE;
-+ bool somefailed = false;
- struct outstate outstate;
- char numbuf[LINENUM_LENGTH_BOUND + 1];
-
-+ xalloc_exit_failure = 2;
-+ program_name = argv[0];
- init_time ();
-
- setbuf(stderr, serrbuf);
-@@ -141,12 +141,11 @@
- posixly_correct = getenv ("POSIXLY_CORRECT") != 0;
- backup_if_mismatch = ! posixly_correct;
- patch_get = ((val = getenv ("PATCH_GET"))
-- ? numeric_string (val, 1, "PATCH_GET value")
-+ ? numeric_string (val, true, "PATCH_GET value")
- : posixly_correct - 1);
-
- val = getenv ("SIMPLE_BACKUP_SUFFIX");
-- if (val && *val)
-- simple_backup_suffix = val;
-+ simple_backup_suffix = val && *val ? val : ".orig";
-
- if ((version_control = getenv ("PATCH_VERSION_CONTROL")))
- version_control_context = "$PATCH_VERSION_CONTROL";
-@@ -171,7 +170,7 @@
- init_output (outfile, 0, &outstate);
-
- /* Make sure we clean up in case of disaster. */
-- set_signals(0);
-+ set_signals (false);
-
- for (
- open_patch_file (patchname);
-@@ -180,28 +179,26 @@
- ) { /* for each patch in patch file */
- int hunk = 0;
- int failed = 0;
-- int mismatch = 0;
-+ bool mismatch = false;
- char *outname = outfile ? outfile : inname;
-
- if (!skip_rest_of_patch)
- get_input_file (inname, outname);
-
- if (diff_type == ED_DIFF) {
-- outstate.zero_output = 0;
-- if (! dry_run)
-+ outstate.zero_output = false;
-+ somefailed |= skip_rest_of_patch;
-+ do_ed_script (outstate.ofp);
-+ if (! dry_run && ! outfile && ! skip_rest_of_patch)
- {
-- do_ed_script (outstate.ofp);
-- if (! outfile)
-- {
-- struct stat statbuf;
-- if (stat (TMPOUTNAME, &statbuf) != 0)
-- pfatal ("%s", TMPOUTNAME);
-- outstate.zero_output = statbuf.st_size == 0;
-- }
-+ struct stat statbuf;
-+ if (stat (TMPOUTNAME, &statbuf) != 0)
-+ pfatal ("%s", TMPOUTNAME);
-+ outstate.zero_output = statbuf.st_size == 0;
- }
- } else {
- int got_hunk;
-- int apply_anyway = 0;
-+ bool apply_anyway = false;
-
- /* initialize the patched file */
- if (! skip_rest_of_patch && ! outfile)
-@@ -236,7 +233,7 @@
- do {
- where = locate_hunk(fuzz);
- if (! where || fuzz || last_offset)
-- mismatch = 1;
-+ mismatch = true;
- if (hunk == 1 && ! where && ! (force | apply_anyway)
- && reverse == reverse_flag_specified) {
- /* dwim for reversed patch? */
-@@ -253,7 +250,7 @@
- (reverse
- ? "Unreversed"
- : "Reversed (or previously applied)"))))
-- reverse ^= 1;
-+ reverse = ! reverse;
- else
- {
- /* Put it back to normal. */
-@@ -261,7 +258,7 @@
- fatal ("lost hunk on alloc error!");
- if (where)
- {
-- apply_anyway = 1;
-+ apply_anyway = true;
- fuzz--; /* Undo `++fuzz' below. */
- where = 0;
- }
-@@ -344,7 +341,7 @@
- if (! spew_output (&outstate))
- {
- say ("Skipping patch.\n");
-- skip_rest_of_patch = TRUE;
-+ skip_rest_of_patch = true;
- }
- }
- }
-@@ -354,7 +351,7 @@
- if (! skip_rest_of_patch && ! outfile) {
- if (outstate.zero_output
- && (remove_empty_files
-- || (pch_says_nonexistent (reverse ^ 1) == 2
-+ || (pch_says_nonexistent (! reverse) == 2
- && ! posixly_correct)))
- {
- if (verbosity == VERBOSE)
-@@ -371,9 +368,9 @@
- else
- {
- if (! outstate.zero_output
-- && pch_says_nonexistent (reverse ^ 1))
-+ && pch_says_nonexistent (! reverse))
- {
-- mismatch = 1;
-+ mismatch = true;
- if (verbosity != SILENT)
- say ("File %s is not empty after patch, as expected\n",
- quotearg (outname));
-@@ -389,7 +386,7 @@
- || (backup_if_mismatch && (mismatch | failed))));
-
- if ((set_time | set_utc)
-- && (t = pch_timestamp (reverse ^ 1)) != (time_t) -1)
-+ && (t = pch_timestamp (! reverse)) != (time_t) -1)
- {
- struct utimbuf utimbuf;
- utimbuf.actime = utimbuf.modtime = t;
-@@ -418,7 +415,7 @@
- if (fclose (rejfp) != 0)
- write_fatal ();
- if (failed) {
-- somefailed = TRUE;
-+ somefailed = true;
- say ("%d out of %d hunk%s %s", failed, hunk, "s" + (hunk == 1),
- skip_rest_of_patch ? "ignored" : "FAILED");
- if (outname) {
-@@ -432,7 +429,7 @@
- if (! dry_run)
- {
- move_file (TMPREJNAME, &TMPREJNAME_needs_removal,
-- rej, instat.st_mode, FALSE);
-+ rej, instat.st_mode, false);
- if (! inerrno
- && (chmod (rej, (instat.st_mode
- & ~(S_IXUSR|S_IXGRP|S_IXOTH)))
-@@ -446,7 +443,7 @@
- say ("\n");
- }
- }
-- set_signals (1);
-+ set_signals (true);
- }
- if (outstate.ofp && (ferror (outstate.ofp) || fclose (outstate.ofp) != 0))
- write_fatal ();
-@@ -482,7 +479,7 @@
- }
-
- reverse = reverse_flag_specified;
-- skip_rest_of_patch = FALSE;
-+ skip_rest_of_patch = false;
- }
-
- static char const shortopts[] = "bB:cd:D:eEfF:g:i:lnNo:p:r:RstTuvV:x:Y:z:Z";
-@@ -585,7 +582,7 @@
- " --posix Conform to the POSIX standard.",
- "",
- " -d DIR --directory=DIR Change the working directory to DIR first.",
--#if HAVE_SETMODE
-+#if HAVE_SETMODE_DOS
- " --binary Read and write data in binary mode.",
- #else
- " --binary Read and write data in binary mode (no effect on this platform).",
-@@ -594,7 +591,7 @@
- " -v --version Output version info.",
- " --help Output this help.",
- "",
--"Report bugs to <bug-gnu-utils at gnu.org>.",
-+"Report bugs to <" PACKAGE_BUGREPORT ">.",
- 0
- };
-
-@@ -635,7 +632,7 @@
- != -1) {
- switch (optc) {
- case 'b':
-- make_backups = 1;
-+ make_backups = true;
- /* Special hack for backward compatibility with CVS 1.9.
- If the last 4 args are `-b SUFFIX ORIGFILE PATCHFILE',
- treat `-b' as if it were `-b -z'. */
-@@ -671,28 +668,28 @@
- diff_type = ED_DIFF;
- break;
- case 'E':
-- remove_empty_files = TRUE;
-+ remove_empty_files = true;
- break;
- case 'f':
-- force = TRUE;
-+ force = true;
- break;
- case 'F':
-- maxfuzz = numeric_string (optarg, 0, "fuzz factor");
-+ maxfuzz = numeric_string (optarg, false, "fuzz factor");
- break;
- case 'g':
-- patch_get = numeric_string (optarg, 1, "get option value");
-+ patch_get = numeric_string (optarg, true, "get option value");
- break;
- case 'i':
- patchname = savestr (optarg);
- break;
- case 'l':
-- canonicalize = TRUE;
-+ canonicalize = true;
- break;
- case 'n':
- diff_type = NORMAL_DIFF;
- break;
- case 'N':
-- noreverse = TRUE;
-+ noreverse = true;
- break;
- case 'o':
- if (strcmp (optarg, "-") == 0)
-@@ -700,23 +697,23 @@
- outfile = savestr (optarg);
- break;
- case 'p':
-- strippath = numeric_string (optarg, 0, "strip count");
-+ strippath = numeric_string (optarg, false, "strip count");
- break;
- case 'r':
- rejname = savestr (optarg);
- break;
- case 'R':
-- reverse = 1;
-- reverse_flag_specified = 1;
-+ reverse = true;
-+ reverse_flag_specified = true;
- break;
- case 's':
- verbosity = SILENT;
- break;
- case 't':
-- batch = TRUE;
-+ batch = true;
- break;
- case 'T':
-- set_time = 1;
-+ set_time = true;
- break;
- case 'u':
- diff_type = UNI_DIFF;
-@@ -731,7 +728,7 @@
- break;
- #if DEBUGGING
- case 'x':
-- debug = numeric_string (optarg, 1, "debugging option");
-+ debug = numeric_string (optarg, true, "debugging option");
- break;
- #endif
- case 'Y':
-@@ -746,29 +743,29 @@
- simple_backup_suffix = savestr (optarg);
- break;
- case 'Z':
-- set_utc = 1;
-+ set_utc = true;
- break;
- case CHAR_MAX + 1:
-- dry_run = TRUE;
-+ dry_run = true;
- break;
- case CHAR_MAX + 2:
- verbosity = VERBOSE;
- break;
- case CHAR_MAX + 3:
--#if HAVE_SETMODE
-+#if HAVE_SETMODE_DOS
- binary_transput = O_BINARY;
- #endif
- break;
- case CHAR_MAX + 4:
- usage (stdout, 0);
- case CHAR_MAX + 5:
-- backup_if_mismatch = 1;
-+ backup_if_mismatch = true;
- break;
- case CHAR_MAX + 6:
-- backup_if_mismatch = 0;
-+ backup_if_mismatch = false;
- break;
- case CHAR_MAX + 7:
-- posixly_correct = 1;
-+ posixly_correct = true;
- break;
- case CHAR_MAX + 8:
- {
-@@ -810,7 +807,7 @@
- returning the result. */
- static int
- numeric_string (char const *string,
-- int negative_allowed,
-+ bool negative_allowed,
- char const *argtype_msgid)
- {
- int value = 0;
-@@ -884,7 +881,7 @@
- && offset <= max_pos_offset
- && patch_match (first_guess, offset, (LINENUM) 0, suffix_fuzz))
- {
-- last_offset = offset;
-+ last_offset += offset;
- return first_guess + offset;
- }
- else
-@@ -898,7 +895,7 @@
- if (offset <= max_neg_offset
- && patch_match (first_guess, -offset, prefix_fuzz, (LINENUM) 0))
- {
-- last_offset = - offset;
-+ last_offset -= offset;
- return first_guess - offset;
- }
- else
-@@ -913,8 +910,8 @@
- if (debug & 1)
- say ("Offset changing from %s to %s\n",
- format_linenum (numbuf0, last_offset),
-- format_linenum (numbuf1, offset));
-- last_offset = offset;
-+ format_linenum (numbuf1, last_offset + offset));
-+ last_offset += offset;
- return first_guess+offset;
- }
- if (0 < offset && offset <= max_neg_offset
-@@ -922,8 +919,8 @@
- if (debug & 1)
- say ("Offset changing from %s to %s\n",
- format_linenum (numbuf0, last_offset),
-- format_linenum (numbuf1, -offset));
-- last_offset = -offset;
-+ format_linenum (numbuf1, last_offset - offset));
-+ last_offset -= offset;
- return first_guess-offset;
- }
- }
-@@ -1009,10 +1006,10 @@
- if (pch_char(old) == '-') {
- assert (outstate->after_newline);
- if (! copy_till (outstate, where + old - 1))
-- return FALSE;
-+ return false;
- if (R_do_defines) {
- if (def_state == OUTSIDE) {
-- fprintf (fp, outstate->after_newline + if_defined,
-+ fprintf (fp, outstate->after_newline + not_defined,
- R_do_defines);
- def_state = IN_IFNDEF;
- }
-@@ -1023,7 +1020,7 @@
- if (ferror (fp))
- write_fatal ();
- outstate->after_newline = pch_write_line (old, fp);
-- outstate->zero_output = 0;
-+ outstate->zero_output = false;
- }
- last_frozen_line++;
- old++;
-@@ -1033,7 +1030,7 @@
- }
- else if (pch_char(new) == '+') {
- if (! copy_till (outstate, where + old - 1))
-- return FALSE;
-+ return false;
- if (R_do_defines) {
- if (def_state == IN_IFNDEF) {
- fprintf (fp, outstate->after_newline + else_defined);
-@@ -1048,7 +1045,7 @@
- write_fatal ();
- }
- outstate->after_newline = pch_write_line (new, fp);
-- outstate->zero_output = 0;
-+ outstate->zero_output = false;
- new++;
- }
- else if (pch_char(new) != pch_char(old)) {
-@@ -1064,10 +1061,10 @@
- else if (pch_char(new) == '!') {
- assert (outstate->after_newline);
- if (! copy_till (outstate, where + old - 1))
-- return FALSE;
-+ return false;
- assert (outstate->after_newline);
- if (R_do_defines) {
-- fprintf (fp, not_defined, R_do_defines);
-+ fprintf (fp, 1 + not_defined, R_do_defines);
- if (ferror (fp))
- write_fatal ();
- def_state = IN_IFNDEF;
-@@ -1096,25 +1093,24 @@
- new++;
- }
- while (pch_char (new) == '!');
-- outstate->zero_output = 0;
-+ outstate->zero_output = false;
- }
- else {
- assert(pch_char(new) == ' ');
- old++;
- new++;
- if (R_do_defines && def_state != OUTSIDE) {
-- fprintf (fp, outstate->after_newline + end_defined,
-- R_do_defines);
-+ fprintf (fp, outstate->after_newline + end_defined);
- if (ferror (fp))
- write_fatal ();
-- outstate->after_newline = 1;
-+ outstate->after_newline = true;
- def_state = OUTSIDE;
- }
- }
- }
- if (new <= pat_end && pch_char(new) == '+') {
- if (! copy_till (outstate, where + old - 1))
-- return FALSE;
-+ return false;
- if (R_do_defines) {
- if (def_state == OUTSIDE) {
- fprintf (fp, outstate->after_newline + if_defined,
-@@ -1127,7 +1123,7 @@
- }
- if (ferror (fp))
- write_fatal ();
-- outstate->zero_output = 0;
-+ outstate->zero_output = false;
- }
-
- do
-@@ -1135,18 +1131,18 @@
- if (! outstate->after_newline && putc ('\n', fp) == EOF)
- write_fatal ();
- outstate->after_newline = pch_write_line (new, fp);
-- outstate->zero_output = 0;
-+ outstate->zero_output = false;
- new++;
- }
- while (new <= pat_end && pch_char (new) == '+');
- }
- if (R_do_defines && def_state != OUTSIDE) {
-- fprintf (fp, outstate->after_newline + end_defined, R_do_defines);
-+ fprintf (fp, outstate->after_newline + end_defined);
- if (ferror (fp))
- write_fatal ();
-- outstate->after_newline = 1;
-+ outstate->after_newline = true;
- }
-- return TRUE;
-+ return true;
- }
-
- /* Create an output file. */
-@@ -1168,8 +1164,8 @@
- init_output (char const *name, int open_flags, struct outstate *outstate)
- {
- outstate->ofp = name ? create_output_file (name, open_flags) : (FILE *) 0;
-- outstate->after_newline = 1;
-- outstate->zero_output = 1;
-+ outstate->after_newline = true;
-+ outstate->zero_output = true;
- }
-
- /* Open a file to put hunks we can't locate. */
-@@ -1195,22 +1191,22 @@
- if (R_last_frozen_line > lastline)
- {
- say ("misordered hunks! output would be garbled\n");
-- return FALSE;
-+ return false;
- }
- while (R_last_frozen_line < lastline)
- {
-- s = ifetch (++R_last_frozen_line, 0, &size);
-+ s = ifetch (++R_last_frozen_line, false, &size);
- if (size)
- {
- if ((! outstate->after_newline && putc ('\n', fp) == EOF)
- || ! fwrite (s, sizeof *s, size, fp))
- write_fatal ();
- outstate->after_newline = s[size - 1] == '\n';
-- outstate->zero_output = 0;
-+ outstate->zero_output = false;
- }
- }
- last_frozen_line = R_last_frozen_line;
-- return TRUE;
-+ return true;
- }
-
- /* Finish copying the input file to the output file. */
-@@ -1229,7 +1225,7 @@
-
- if (last_frozen_line < input_lines)
- if (! copy_till (outstate, input_lines))
-- return FALSE;
-+ return false;
-
- if (outstate->ofp && ! outfile)
- {
-@@ -1238,7 +1234,7 @@
- outstate->ofp = 0;
- }
-
-- return TRUE;
-+ return true;
- }
-
- /* Does the patch pattern match at line base+offset? */
-@@ -1259,13 +1255,13 @@
- if (!similar(p, size,
- pfetch(pline),
- pch_line_len(pline) ))
-- return FALSE;
-+ return false;
- }
- else if (size != pch_line_len (pline)
- || memcmp (p, pfetch (pline), size) != 0)
-- return FALSE;
-+ return false;
- }
-- return TRUE;
-+ return true;
- }
-
- /* Do two lines match with canonicalized white space? */
-@@ -1287,7 +1283,7 @@
- if (alen)
- {
- if (!(*a == ' ' || *a == '\t'))
-- return FALSE;
-+ return false;
- do a++, alen--;
- while (alen && (*a == ' ' || *a == '\t'));
- }
-@@ -1295,7 +1291,7 @@
- return alen == blen;
- }
- else if (!alen || *a++ != *b++)
-- return FALSE;
-+ return false;
- else
- alen--, blen--;
- }
-@@ -1303,8 +1299,8 @@
-
- /* Make a temporary file. */
-
--#if HAVE_MKTEMP
--char *mktemp PARAMS ((char *));
-+#if HAVE_MKTEMP && ! HAVE_DECL_MKTEMP && ! defined mktemp
-+char *mktemp (char *);
- #endif
-
- #ifndef TMPDIR
-@@ -1312,7 +1308,7 @@
- #endif
-
- static char const *
--make_temp (int letter)
-+make_temp (char letter)
- {
- char *r;
- #if HAVE_MKTEMP
-@@ -1322,7 +1318,14 @@
- if (!tmpdir) tmpdir = TMPDIR;
- r = xmalloc (strlen (tmpdir) + 10);
- sprintf (r, "%s/p%cXXXXXX", tmpdir, letter);
-+
-+ /* It is OK to use mktemp here, since the rest of the code always
-+ opens temp files with O_EXCL. It might be better to use mkstemp
-+ to avoid some DoS problems, but simply substituting mkstemp for
-+ mktemp here will not fix the DoS problems; a more extensive
-+ change would be needed. */
- mktemp (r);
-+
- if (!*r)
- pfatal ("mktemp");
- #else
-diff -urNd -urNd patch-2.5.4/patchlevel.h patch-2.5.9/patchlevel.h
---- patch-2.5.4/patchlevel.h 1999-08-30 02:48:14.000000000 -0400
-+++ patch-2.5.9/patchlevel.h 1969-12-31 19:00:00.000000000 -0500
-@@ -1 +0,0 @@
--#define PATCH_VERSION "2.5.4"
-diff -urNd -urNd patch-2.5.4/patch.man patch-2.5.9/patch.man
---- patch-2.5.4/patch.man 1998-03-21 10:48:43.000000000 -0500
-+++ patch-2.5.9/patch.man 2002-05-25 06:36:44.000000000 -0400
-@@ -2,7 +2,7 @@
- .de Id
- .ds Dt \\$4
- ..
--.Id $Id: patch.man,v 1.26 1998/03/21 15:48:43 eggert Exp $
-+.Id $Id: patch.man,v 1.31 2002/05/25 10:36:44 eggert Exp $
- .ds = \-\^\-
- .de Sp
- .if t .sp .3
-@@ -70,6 +70,10 @@
- or is encapsulated one or more times by prepending
- "\fB\- \fP" to lines starting with "\fB\-\fP" as specified by Internet RFC 934,
- this is taken into account.
-+After removing indenting or encapsulation,
-+lines beginning with
-+.B #
-+are ignored, as they are considered to be comments.
- .PP
- With context diffs, and to a lesser extent with normal diffs,
- .B patch
-@@ -185,19 +189,19 @@
- .B " \(bu"
- If
- .B patch
--is not ignoring \s-1RCS\s0, ClearCase, and \s-1SCCS\s0 (see the
-+is not ignoring \s-1RCS\s0, ClearCase, Perforce, and \s-1SCCS\s0 (see the
- .BI "\-g\ " num
- or
- .BI \*=get= num
- option), and no named files exist
--but an \s-1RCS\s0, ClearCase, or \s-1SCCS\s0 master is found,
-+but an \s-1RCS\s0, ClearCase, Perforce, or \s-1SCCS\s0 master is found,
- .B patch
- selects the first named file
--with an \s-1RCS\s0, ClearCase, or \s-1SCCS\s0 master.
-+with an \s-1RCS\s0, ClearCase, Perforce, or \s-1SCCS\s0 master.
- .TP
- .B " \(bu"
- If no named files exist,
--no \s-1RCS\s0, ClearCase, or \s-1SCCS\s0 master was found,
-+no \s-1RCS\s0, ClearCase, Perforce, or \s-1SCCS\s0 master was found,
- some names are given,
- .B patch
- is not conforming to \s-1POSIX\s0,
-@@ -362,14 +366,14 @@
- .BR patch 's
- actions when a file is under \s-1RCS\s0 or \s-1SCCS\s0 control,
- and does not exist or is read-only and matches the default version,
--or when a file is under ClearCase control and does not exist.
-+or when a file is under ClearCase or Perforce control and does not exist.
- If
- .I num
- is positive,
- .B patch
- gets (or checks out) the file from the revision control system; if zero,
- .B patch
--ignores \s-1RCS\s0, ClearCase, and \s-1SCCS\s0
-+ignores \s-1RCS\s0, ClearCase, Perforce, and \s-1SCCS\s0
- and does not get the file; and if negative,
- .B patch
- asks the user whether to get the file.
-@@ -411,6 +415,9 @@
- Send output to
- .I outfile
- instead of patching files in place.
-+Do not use this option if
-+.I outfile
-+is one of the files to be patched.
- .TP
- \fB\-p\fP\fInum\fP or \fB\*=strip\fP\fB=\fP\fInum\fP
- Strip the smallest prefix containing
-@@ -458,7 +465,8 @@
- Do not remove files that are empty after patching.
- .TP
- .B " \(bu"
--Do not ask whether to get files from \s-1RCS\s0, ClearCase, or \s-1SCCS\s0.
-+Do not ask whether to get files from \s-1RCS\s0, ClearCase, Perforce,
-+or \s-1SCCS\s0.
- .TP
- .B " \(bu"
- Require that all options precede the files in the command line.
-@@ -715,7 +723,8 @@
- .B PATCH_GET
- This specifies whether
- .B patch
--gets missing or read-only files from \s-1RCS\s0, ClearCase, or \s-1SCCS\s0
-+gets missing or read-only files from \s-1RCS\s0, ClearCase, Perforce,
-+or \s-1SCCS\s0
- by default; see the
- .B \-g
- or
-@@ -1097,7 +1106,7 @@
- .fi
- .SH BUGS
- Please report bugs via email to
--.BR <bug-gnu-utils at gnu.org> .
-+.BR <bug-patch at gnu.org> .
- .PP
- .B patch
- could be smarter about partial matches, excessively deviant offsets and
-@@ -1115,13 +1124,15 @@
- This could be construed as a feature.
- .SH COPYING
- Copyright
--.if t \(co
-+.ie t \(co
-+.el (C)
- 1984, 1985, 1986, 1988 Larry Wall.
- .br
- Copyright
--.if t \(co
--1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
--Free Software Foundation, Inc.
-+.ie t \(co
-+.el (C)
-+1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-+2000, 2001, 2002 Free Software Foundation, Inc.
- .PP
- Permission is granted to make and distribute verbatim copies of
- this manual provided the copyright notice and this permission notice
-diff -urNd -urNd patch-2.5.4/pch.c patch-2.5.9/pch.c
---- patch-2.5.4/pch.c 1999-08-30 02:20:08.000000000 -0400
-+++ patch-2.5.9/pch.c 2003-05-20 10:03:17.000000000 -0400
-@@ -1,9 +1,11 @@
- /* reading patches */
-
--/* $Id: pch.c,v 1.29 1999/08/30 06:20:08 eggert Exp $ */
-+/* $Id: pch.c,v 1.44 2003/05/20 14:03:17 eggert Exp $ */
-
--/* Copyright 1986, 1987, 1988 Larry Wall
-- Copyright 1990, 1991-1993, 1997-1998, 1999 Free Software Foundation, Inc.
-+/* Copyright (C) 1986, 1987, 1988 Larry Wall
-+
-+ Copyright (C) 1990, 1991, 1992, 1993, 1997, 1998, 1999, 2000, 2001,
-+ 2002, 2003 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -23,7 +25,7 @@
- #define XTERN extern
- #include <common.h>
- #include <backupfile.h>
--#include <basename.h>
-+#include <dirname.h>
- #include <inp.h>
- #include <quotearg.h>
- #include <util.h>
-@@ -57,7 +59,8 @@
- static char *p_Char; /* +, -, and ! */
- static LINENUM hunkmax = INITHUNKMAX; /* size of above arrays */
- static int p_indent; /* indent to patch */
--static int p_strip_trailing_cr; /* nonzero if stripping trailing \r */
-+static bool p_strip_trailing_cr; /* true if stripping trailing \r */
-+static bool p_pass_comments_through; /* true if not ignoring # lines */
- static file_offset p_base; /* where to intuit this time */
- static LINENUM p_bline; /* line # of p_base */
- static file_offset p_start; /* where intuit found a patch */
-@@ -68,17 +71,18 @@
-
- enum nametype { OLD, NEW, INDEX, NONE };
-
--static char *scan_linenum PARAMS ((char *, LINENUM *));
--static enum diff intuit_diff_type PARAMS ((void));
--static enum nametype best_name PARAMS ((char * const *, int const *));
--static int prefix_components PARAMS ((char *, int));
--static size_t pget_line PARAMS ((int, int, int));
--static size_t get_line PARAMS ((void));
--static bool incomplete_line PARAMS ((void));
--static bool grow_hunkmax PARAMS ((void));
--static void malformed PARAMS ((void)) __attribute__ ((noreturn));
--static void next_intuit_at PARAMS ((file_offset, LINENUM));
--static void skip_to PARAMS ((file_offset, LINENUM));
-+static char *scan_linenum (char *, LINENUM *);
-+static enum diff intuit_diff_type (void);
-+static enum nametype best_name (char * const *, int const *);
-+static int prefix_components (char *, bool);
-+static size_t pget_line (int, int, bool, bool);
-+static size_t get_line (void);
-+static bool incomplete_line (void);
-+static bool grow_hunkmax (void);
-+static void malformed (void) __attribute__ ((noreturn));
-+static void next_intuit_at (file_offset, LINENUM);
-+static void skip_to (file_offset, LINENUM);
-+static char get_ed_command_letter (char const *);
-
- /* Prepare to look for the next patch in the patch file. */
-
-@@ -92,7 +96,7 @@
- p_end = -1;
- p_max = 0;
- p_indent = 0;
-- p_strip_trailing_cr = 0;
-+ p_strip_trailing_cr = false;
- }
-
- /* Open the patch file at the beginning of time. */
-@@ -105,7 +109,7 @@
- if (!filename || !*filename || strEQ (filename, "-"))
- {
- file_offset stdin_pos;
--#if HAVE_SETMODE
-+#if HAVE_SETMODE_DOS
- if (binary_transput)
- {
- if (isatty (STDIN_FILENO))
-@@ -181,14 +185,14 @@
- if ((p_line = (char **) realloc (p_line, hunkmax * sizeof (*p_line)))
- && (p_len = (size_t *) realloc (p_len, hunkmax * sizeof (*p_len)))
- && (p_Char = realloc (p_Char, hunkmax * sizeof (*p_Char))))
-- return TRUE;
-+ return true;
- if (!using_plan_a)
- memory_fatal ();
- /* Don't free previous values of p_line etc.,
- since some broken implementations free them for us.
- Whatever is null will be allocated again from within plan_a (),
- of all places. */
-- return FALSE;
-+ return false;
- }
-
- /* True if the remainder of the patch file contains a diff of some sort. */
-@@ -199,7 +203,7 @@
- if (p_base != 0 && p_base >= p_filesize) {
- if (verbosity == VERBOSE)
- say ("done\n");
-- return FALSE;
-+ return false;
- }
- if (verbosity == VERBOSE)
- say ("Hmm...");
-@@ -211,13 +215,13 @@
- : " I can't seem to find a patch in there anywhere.\n");
- if (! p_base && p_filesize)
- fatal ("Only garbage was found in the patch input.");
-- return FALSE;
-+ return false;
- }
- if (skip_rest_of_patch)
- {
- Fseek (pfp, p_start, SEEK_SET);
- p_input_line = p_sline - 1;
-- return TRUE;
-+ return true;
- }
- if (verbosity == VERBOSE)
- say (" %sooks like %s to me...\n",
-@@ -239,18 +243,19 @@
- char numbuf[LINENUM_LENGTH_BOUND + 1];
- say ("can't find file to patch at input line %s\n",
- format_linenum (numbuf, p_sline));
-- say (strippath == -1
-- ? "Perhaps you should have used the -p or --strip option?\n"
-- : "Perhaps you used the wrong -p or --strip option?\n");
-+ if (diff_type != ED_DIFF)
-+ say (strippath == -1
-+ ? "Perhaps you should have used the -p or --strip option?\n"
-+ : "Perhaps you used the wrong -p or --strip option?\n");
- }
- }
-
- skip_to(p_start,p_sline);
- while (!inname) {
-- if (force || batch) {
-+ if (force | batch) {
- say ("No file to patch. Skipping patch.\n");
-- skip_rest_of_patch = TRUE;
-- return TRUE;
-+ skip_rest_of_patch = true;
-+ return true;
- }
- ask ("File to patch: ");
- inname = fetchname (buf, 0, (time_t *) 0);
-@@ -264,6 +269,7 @@
- else
- {
- perror (inname);
-+ fflush (stderr);
- free (inname);
- inname = 0;
- }
-@@ -273,12 +279,12 @@
- if (*buf != 'n') {
- if (verbosity != SILENT)
- say ("Skipping patch.\n");
-- skip_rest_of_patch = TRUE;
-- return TRUE;
-+ skip_rest_of_patch = true;
-+ return true;
- }
- }
- }
-- return TRUE;
-+ return true;
- }
-
- /* Determine what kind of diff is in the remaining part of the patch file. */
-@@ -288,9 +294,10 @@
- {
- register file_offset this_line = 0;
- register file_offset first_command_line = -1;
-+ char first_ed_command_letter = 0;
- LINENUM fcl_line = 0; /* Pacify `gcc -W'. */
-- register bool this_is_a_command = FALSE;
-- register bool stars_this_line = FALSE;
-+ register bool this_is_a_command = false;
-+ register bool stars_this_line = false;
- enum nametype i;
- char *name[3];
- struct stat st[3];
-@@ -314,15 +321,16 @@
- register bool last_line_was_command = this_is_a_command;
- register bool stars_last_line = stars_this_line;
- register int indent = 0;
-- int strip_trailing_cr;
-+ char ed_command_letter;
-+ bool strip_trailing_cr;
- size_t chars_read;
-
- this_line = file_tell (pfp);
-- chars_read = pget_line (0, 0, 0);
-+ chars_read = pget_line (0, 0, false, false);
- if (chars_read == (size_t) -1)
- memory_fatal ();
- if (! chars_read) {
-- if (first_command_line >= 0) {
-+ if (first_ed_command_letter) {
- /* nothing but deletes!? */
- p_start = first_command_line;
- p_sline = fcl_line;
-@@ -346,8 +354,11 @@
- continue;
- this_is_a_command = (ISDIGIT (*s) &&
- (*t == 'd' || *t == 'c' || *t == 'a') );
-- if (first_command_line < 0 && this_is_a_command) {
-+ if (first_command_line < 0
-+ && ((ed_command_letter = get_ed_command_letter (s))
-+ || this_is_a_command)) {
- first_command_line = this_line;
-+ first_ed_command_letter = ed_command_letter;
- fcl_line = p_input_line;
- p_indent = indent; /* assume this for now */
- p_strip_trailing_cr = strip_trailing_cr;
-@@ -363,8 +374,20 @@
- for (t = s + 7; ISSPACE ((unsigned char) *t); t++)
- continue;
- revision = t;
-- for (t = revision; *t && !ISSPACE ((unsigned char) *t); t++)
-- continue;
-+ for (t = revision; *t; t++)
-+ if (ISSPACE ((unsigned char) *t))
-+ {
-+ char const *u;
-+ for (u = t + 1; ISSPACE ((unsigned char) *u); u++)
-+ continue;
-+ if (*u)
-+ {
-+ char numbuf[LINENUM_LENGTH_BOUND + 1];
-+ say ("Prereq: with multiple words at line %s of patch\n",
-+ format_linenum (numbuf, this_line));
-+ }
-+ break;
-+ }
- if (t == revision)
- revision = 0;
- else {
-@@ -391,8 +414,6 @@
- if ((diff_type == NO_DIFF || diff_type == ED_DIFF) &&
- first_command_line >= 0 &&
- strEQ(s, ".\n") ) {
-- p_indent = indent;
-- p_strip_trailing_cr = strip_trailing_cr;
- p_start = first_command_line;
- p_sline = fcl_line;
- retval = ED_DIFF;
-@@ -419,12 +440,12 @@
- if (s[0] == '+' && s[1] == '0' && !ISDIGIT (s[2]))
- p_says_nonexistent[NEW] = 1 + ! p_timestamp[NEW];
- p_indent = indent;
-- p_strip_trailing_cr = strip_trailing_cr;
- p_start = this_line;
- p_sline = p_input_line;
- retval = UNI_DIFF;
- if (! ((name[OLD] || ! p_timestamp[OLD])
-- && (name[NEW] || ! p_timestamp[NEW])))
-+ && (name[NEW] || ! p_timestamp[NEW]))
-+ && ! name[INDEX])
- {
- char numbuf[LINENUM_LENGTH_BOUND + 1];
- say ("missing header for unified diff at line %s of patch\n",
-@@ -457,14 +478,15 @@
- LINENUM saved_p_bline = p_bline;
- Fseek (pfp, previous_line, SEEK_SET);
- p_input_line -= 2;
-- if (another_hunk (retval, 0)
-+ if (another_hunk (retval, false)
- && ! p_repl_lines && p_newfirst == 1)
- p_says_nonexistent[NEW] = 1 + ! p_timestamp[NEW];
- next_intuit_at (saved_p_base, saved_p_bline);
- }
-
- if (! ((name[OLD] || ! p_timestamp[OLD])
-- && (name[NEW] || ! p_timestamp[NEW])))
-+ && (name[NEW] || ! p_timestamp[NEW]))
-+ && ! name[INDEX])
- {
- char numbuf[LINENUM_LENGTH_BOUND + 1];
- say ("missing header for context diff at line %s of patch\n",
-@@ -487,7 +509,7 @@
- scan_exit:
-
- /* To intuit `inname', the name of the file to patch,
-- use the algorithm specified by POSIX 1003.2b/D11 section 5.22.7.2
-+ use the algorithm specified by POSIX 1003.1-2001 XCU lines 25680-26599
- (with some modifications if posixly_correct is zero):
-
- - Take the old and new names from the context header if present,
-@@ -542,7 +564,7 @@
-
- if (! posixly_correct)
- {
-- int is_empty;
-+ bool is_empty;
-
- i = best_name (name, stat_errno);
-
-@@ -556,7 +578,8 @@
- char const *cs;
- char *getbuf;
- char *diffbuf;
-- int readonly = outfile && strcmp (outfile, name[i]) != 0;
-+ bool readonly = (outfile
-+ && strcmp (outfile, name[i]) != 0);
-
- if (nope == NONE || strcmp (name[nope], name[i]) != 0)
- {
-@@ -566,7 +589,7 @@
- version_controlled[i] = !! cs;
- if (cs)
- {
-- if (version_get (name[i], cs, 0, readonly,
-+ if (version_get (name[i], cs, false, readonly,
- getbuf, &st[i]))
- stat_errno[i] = 0;
- else
-@@ -589,7 +612,8 @@
- if ((! is_empty) < p_says_nonexistent[reverse ^ is_empty])
- {
- assert (i0 != NONE);
-- if (ok_to_reverse
-+ reverse ^=
-+ ok_to_reverse
- ("The next patch%s would %s the file %s,\nwhich %s!",
- reverse ? ", when reversed," : "",
- (i == NONE ? "delete"
-@@ -598,8 +622,7 @@
- quotearg (name[i == NONE || st[i].st_size == 0 ? i0 : i]),
- (i == NONE ? "does not exist"
- : st[i].st_size == 0 ? "is already empty"
-- : "already exists")))
-- reverse ^= 1;
-+ : "already exists"));
- }
-
- if (i == NONE && p_says_nonexistent[reverse])
-@@ -611,8 +634,8 @@
- for (i = OLD; i <= INDEX; i++)
- if (name[i])
- {
-- newdirs[i] = (prefix_components (name[i], 0)
-- - prefix_components (name[i], 1));
-+ newdirs[i] = (prefix_components (name[i], false)
-+ - prefix_components (name[i], true));
- if (newdirs[i] < newdirs_min)
- newdirs_min = newdirs[i];
- }
-@@ -645,9 +668,9 @@
- }
-
- /* Count the path name components in FILENAME's prefix.
-- If CHECKDIRS is nonzero, count only existing directories. */
-+ If CHECKDIRS is true, count only existing directories. */
- static int
--prefix_components (char *filename, int checkdirs)
-+prefix_components (char *filename, bool checkdirs)
- {
- int count = 0;
- struct stat stat_buf;
-@@ -691,7 +714,7 @@
- if (name[i] && !ignore[i])
- {
- /* Take the names with the fewest prefix components. */
-- components[i] = prefix_components (name[i], 0);
-+ components[i] = prefix_components (name[i], false);
- if (components_min < components[i])
- continue;
- components_min = components[i];
-@@ -779,7 +802,7 @@
- {
- char *s;
- LINENUM n = 0;
-- int overflow = 0;
-+ bool overflow = false;
- char numbuf[LINENUM_LENGTH_BOUND + 1];
-
- for (s = s0; ISDIGIT (*s); s++)
-@@ -788,11 +811,11 @@
- overflow |= new_n / 10 != n;
- n = new_n;
- }
--
-+
- if (s == s0)
- fatal ("missing line number at line %s: %s",
- format_linenum (numbuf, p_input_line), buf);
--
-+
- if (overflow)
- fatal ("line number %.*s is too large at line %s: %s",
- (int) (s - s0), s0, format_linenum (numbuf, p_input_line), buf);
-@@ -805,7 +828,7 @@
- 0 if not; -1 if ran out of memory. */
-
- int
--another_hunk (enum diff difftype, int rev)
-+another_hunk (enum diff difftype, bool rev)
- {
- register char *s;
- register LINENUM context = 0;
-@@ -833,10 +856,11 @@
- register LINENUM fillcnt = 0; /* #lines of missing ptrn or repl */
- register LINENUM fillsrc; /* index of first line to copy */
- register LINENUM filldst; /* index of first missing line */
-- bool ptrn_spaces_eaten = FALSE; /* ptrn was slightly misformed */
-- bool some_context = FALSE; /* (perhaps internal) context seen */
-- register bool repl_could_be_missing = TRUE;
-- bool repl_missing = FALSE; /* we are now backtracking */
-+ bool ptrn_spaces_eaten = false; /* ptrn was slightly misformed */
-+ bool some_context = false; /* (perhaps internal) context seen */
-+ register bool repl_could_be_missing = true;
-+ bool ptrn_missing = false; /* The pattern was missing. */
-+ bool repl_missing = false; /* Likewise for replacement. */
- file_offset repl_backtrack_position = 0;
- /* file pos of first repl line */
- LINENUM repl_patch_line; /* input line number for same */
-@@ -844,8 +868,8 @@
- LINENUM ptrn_prefix_context = -1; /* lines in pattern prefix context */
- LINENUM ptrn_suffix_context = -1; /* lines in pattern suffix context */
- LINENUM repl_prefix_context = -1; /* lines in replac. prefix context */
-- register LINENUM ptrn_copiable = 0;
-- /* # of copiable lines in ptrn */
-+ LINENUM ptrn_copiable = 0; /* # of copiable lines in ptrn */
-+ LINENUM repl_copiable = 0; /* Likewise for replacement. */
-
- /* Pacify `gcc -Wall'. */
- fillsrc = filldst = repl_patch_line = repl_context = 0;
-@@ -864,7 +888,7 @@
- return -1;
- if (!chars_read) {
- if (repl_beginning && repl_could_be_missing) {
-- repl_missing = TRUE;
-+ repl_missing = true;
- goto hunk_done;
- }
- if (p_max - p_end < 4) {
-@@ -887,7 +911,7 @@
- case '*':
- if (strnEQ(buf, "********", 8)) {
- if (repl_beginning && repl_could_be_missing) {
-- repl_missing = TRUE;
-+ repl_missing = true;
- goto hunk_done;
- }
- else
-@@ -896,7 +920,7 @@
- }
- if (p_end != 0) {
- if (repl_beginning && repl_could_be_missing) {
-- repl_missing = TRUE;
-+ repl_missing = true;
- goto hunk_done;
- }
- fatal ("unexpected `***' at line %s: %s",
-@@ -945,6 +969,7 @@
- {
- /* `Old' lines were omitted. Set up to fill
- them in from `new' context lines. */
-+ ptrn_missing = true;
- p_end = p_ptrn_lines + 1;
- ptrn_prefix_context = ptrn_suffix_context = -1;
- fillsrc = p_end + 1;
-@@ -965,7 +990,7 @@
- p_hunk_beg + repl_beginning));
- else
- {
-- repl_missing = TRUE;
-+ repl_missing = true;
- goto hunk_done;
- }
- }
-@@ -1009,11 +1034,11 @@
- && (p_prefix_context != 0
- || context != 0
- || p_repl_lines != 1))
-- repl_could_be_missing = FALSE;
-+ repl_could_be_missing = false;
- context = 0;
- break;
- case '+': case '!':
-- repl_could_be_missing = FALSE;
-+ repl_could_be_missing = false;
- change_line:
- s = buf + 1;
- chars_read--;
-@@ -1025,7 +1050,7 @@
- s++;
- chars_read--;
- } else if (repl_beginning && repl_could_be_missing) {
-- repl_missing = TRUE;
-+ repl_missing = true;
- goto hunk_done;
- }
- if (! repl_beginning)
-@@ -1057,7 +1082,7 @@
- }
- if (repl_beginning && repl_could_be_missing &&
- (!ptrn_spaces_eaten || difftype == NEW_CONTEXT_DIFF) ) {
-- repl_missing = TRUE;
-+ repl_missing = true;
- goto hunk_done;
- }
- chars_read -=
-@@ -1071,9 +1096,11 @@
- }
- if (p_end != p_ptrn_lines + 1) {
- ptrn_spaces_eaten |= (repl_beginning != 0);
-- some_context = TRUE;
-+ some_context = true;
- context++;
-- if (!repl_beginning)
-+ if (repl_beginning)
-+ repl_copiable++;
-+ else
- ptrn_copiable++;
- p_Char[p_end] = ' ';
- }
-@@ -1089,12 +1116,14 @@
- s++;
- chars_read--;
- } else if (repl_beginning && repl_could_be_missing) {
-- repl_missing = TRUE;
-+ repl_missing = true;
- goto hunk_done;
- }
-- some_context = TRUE;
-+ some_context = true;
- context++;
-- if (!repl_beginning)
-+ if (repl_beginning)
-+ repl_copiable++;
-+ else
- ptrn_copiable++;
- chars_read -=
- (1 < chars_read
-@@ -1108,7 +1137,7 @@
- break;
- default:
- if (repl_beginning && repl_could_be_missing) {
-- repl_missing = TRUE;
-+ repl_missing = true;
- goto hunk_done;
- }
- malformed ();
-@@ -1136,6 +1165,9 @@
- fillcnt = p_repl_lines;
- p_end = p_max;
- }
-+ else if (! ptrn_missing && ptrn_copiable != repl_copiable)
-+ fatal ("context mangled in hunk at line %s",
-+ format_linenum (numbuf0, p_hunk_beg));
- else if (!some_context && fillcnt == 1) {
- /* the first hunk was a null hunk with no context */
- /* and we were expecting one line -- fix it up. */
-@@ -1499,94 +1531,104 @@
- static size_t
- get_line (void)
- {
-- return pget_line (p_indent, p_rfc934_nesting, p_strip_trailing_cr);
-+ return pget_line (p_indent, p_rfc934_nesting, p_strip_trailing_cr,
-+ p_pass_comments_through);
- }
-
- /* Input a line from the patch file, worrying about indentation.
- Strip up to INDENT characters' worth of leading indentation.
- Then remove up to RFC934_NESTING instances of leading "- ".
-- If STRIP_TRAILING_CR is nonzero, remove any trailing carriage-return.
-+ If STRIP_TRAILING_CR is true, remove any trailing carriage-return.
-+ Unless PASS_COMMENTS_THROUGH is true, ignore any resulting lines
-+ that begin with '#'; they're comments.
- Ignore any partial lines at end of input, but warn about them.
- Succeed if a line was read; it is terminated by "\n\0" for convenience.
- Return the number of characters read, including '\n' but not '\0'.
- Return -1 if we ran out of memory. */
-
- static size_t
--pget_line (int indent, int rfc934_nesting, int strip_trailing_cr)
-+pget_line (int indent, int rfc934_nesting, bool strip_trailing_cr,
-+ bool pass_comments_through)
- {
- register FILE *fp = pfp;
- register int c;
-- register int i = 0;
-+ register int i;
- register char *b;
- register size_t s;
-
-- for (;;)
-+ do
- {
-- c = getc (fp);
-- if (c == EOF)
-+ i = 0;
-+ for (;;)
- {
-- if (ferror (fp))
-- read_fatal ();
-- return 0;
-+ c = getc (fp);
-+ if (c == EOF)
-+ {
-+ if (ferror (fp))
-+ read_fatal ();
-+ return 0;
-+ }
-+ if (indent <= i)
-+ break;
-+ if (c == ' ' || c == 'X')
-+ i++;
-+ else if (c == '\t')
-+ i = (i + 8) & ~7;
-+ else
-+ break;
- }
-- if (indent <= i)
-- break;
-- if (c == ' ' || c == 'X')
-- i++;
-- else if (c == '\t')
-- i = (i + 8) & ~7;
-- else
-- break;
-- }
-
-- i = 0;
-- b = buf;
-+ i = 0;
-+ b = buf;
-
-- while (c == '-' && 0 <= --rfc934_nesting)
-- {
-- c = getc (fp);
-- if (c == EOF)
-- goto patch_ends_in_middle_of_line;
-- if (c != ' ')
-+ while (c == '-' && 0 <= --rfc934_nesting)
- {
-- i = 1;
-- b[0] = '-';
-- break;
-+ c = getc (fp);
-+ if (c == EOF)
-+ goto patch_ends_in_middle_of_line;
-+ if (c != ' ')
-+ {
-+ i = 1;
-+ b[0] = '-';
-+ break;
-+ }
-+ c = getc (fp);
-+ if (c == EOF)
-+ goto patch_ends_in_middle_of_line;
- }
-- c = getc (fp);
-- if (c == EOF)
-- goto patch_ends_in_middle_of_line;
-- }
-
-- s = bufsize;
-+ s = bufsize;
-
-- for (;;)
-- {
-- if (i == s - 1)
-+ for (;;)
- {
-- s *= 2;
-- b = realloc (b, s);
-- if (!b)
-+ if (i == s - 1)
- {
-- if (!using_plan_a)
-- memory_fatal ();
-- return (size_t) -1;
-+ s *= 2;
-+ b = realloc (b, s);
-+ if (!b)
-+ {
-+ if (!using_plan_a)
-+ memory_fatal ();
-+ return (size_t) -1;
-+ }
-+ buf = b;
-+ bufsize = s;
- }
-- buf = b;
-- bufsize = s;
-+ b[i++] = c;
-+ if (c == '\n')
-+ break;
-+ c = getc (fp);
-+ if (c == EOF)
-+ goto patch_ends_in_middle_of_line;
- }
-- b[i++] = c;
-- if (c == '\n')
-- break;
-- c = getc (fp);
-- if (c == EOF)
-- goto patch_ends_in_middle_of_line;
-+
-+ p_input_line++;
- }
-+ while (*b == '#' && !pass_comments_through);
-
- if (strip_trailing_cr && 2 <= i && b[i - 2] == '\r')
- b[i-- - 2] = '\n';
- b[i] = '\0';
-- p_input_line++;
- return i;
-
- patch_ends_in_middle_of_line:
-@@ -1607,13 +1649,13 @@
- {
- while ((c = getc (fp)) != '\n' && c != EOF)
- continue;
-- return TRUE;
-+ return true;
- }
- else
- {
- /* We don't trust ungetc. */
- Fseek (pfp, line_beginning, SEEK_SET);
-- return FALSE;
-+ return false;
- }
- }
-
-@@ -1627,7 +1669,7 @@
- char *tp_char; /* +, -, and ! */
- register LINENUM i;
- register LINENUM n;
-- bool blankline = FALSE;
-+ bool blankline = false;
- register char *s;
-
- i = p_first;
-@@ -1653,14 +1695,14 @@
- if (p_Char)
- free (p_Char);
- p_Char = tp_char;
-- return FALSE; /* not enough memory to swap hunk! */
-+ return false; /* not enough memory to swap hunk! */
- }
-
- /* now turn the new into the old */
-
- i = p_ptrn_lines + 1;
- if (tp_char[i] == '\n') { /* account for possible blank line */
-- blankline = TRUE;
-+ blankline = true;
- i++;
- }
- if (p_efake >= 0) { /* fix non-freeable ptr range */
-@@ -1715,23 +1757,23 @@
- free (tp_len);
- if (tp_char)
- free (tp_char);
-- return TRUE;
-+ return true;
- }
-
--/* Return whether file WHICH (0 = old, 1 = new) appears to nonexistent.
-+/* Return whether file WHICH (false = old, true = new) appears to nonexistent.
- Return 1 for empty, 2 for nonexistent. */
-
--bool
--pch_says_nonexistent (int which)
-+int
-+pch_says_nonexistent (bool which)
- {
- return p_says_nonexistent[which];
- }
-
--/* Return timestamp of patch header for file WHICH (0 = old, 1 = new),
-+/* Return timestamp of patch header for file WHICH (false = old, true = new),
- or -1 if there was no timestamp or an error in the timestamp. */
-
- time_t
--pch_timestamp (int which)
-+pch_timestamp (bool which)
- {
- return p_timestamp[which];
- }
-@@ -1835,6 +1877,60 @@
- return p_hunk_beg;
- }
-
-+/* Is the newline-terminated line a valid `ed' command for patch
-+ input? If so, return the command character; if not, return 0.
-+ This accepts accepts just a subset of the valid commands, but it's
-+ good enough in practice. */
-+
-+static char
-+get_ed_command_letter (char const *line)
-+{
-+ char const *p = line;
-+ char letter;
-+ bool pair = false;
-+ if (! ISDIGIT (*p))
-+ return 0;
-+ while (ISDIGIT (*++p))
-+ continue;
-+ if (*p == ',')
-+ {
-+ if (! ISDIGIT (*++p))
-+ return 0;
-+ while (ISDIGIT (*++p))
-+ continue;
-+ pair = true;
-+ }
-+ letter = *p++;
-+
-+ switch (letter)
-+ {
-+ case 'a':
-+ case 'i':
-+ if (pair)
-+ return 0;
-+ break;
-+
-+ case 'c':
-+ case 'd':
-+ break;
-+
-+ case 's':
-+ if (strncmp (p, "/.//", 4) != 0)
-+ return 0;
-+ p += 4;
-+ break;
-+
-+ default:
-+ return 0;
-+ }
-+
-+ while (*p == ' ' || *p == '\t')
-+ p++;
-+ if (*p == '\n')
-+ return letter;
-+ return 0;
-+}
-+
- /* Apply an ed script by feeding ed itself. */
-
- void
-@@ -1842,13 +1938,11 @@
- {
- static char const ed_program[] = ed_PROGRAM;
-
-- register char *t;
- register file_offset beginning_of_this_line;
-- register bool this_line_is_command = FALSE;
- register FILE *pipefp = 0;
- register size_t chars_read;
-
-- if (!skip_rest_of_patch) {
-+ if (! dry_run && ! skip_rest_of_patch) {
- int exclusive = TMPOUTNAME_needs_removal ? 0 : O_EXCL;
- assert (! inerrno);
- TMPOUTNAME_needs_removal = 1;
-@@ -1861,21 +1955,20 @@
- pfatal ("Can't open pipe to %s", quotearg (buf));
- }
- for (;;) {
-+ char ed_command_letter;
- beginning_of_this_line = file_tell (pfp);
- chars_read = get_line ();
- if (! chars_read) {
- next_intuit_at(beginning_of_this_line,p_input_line);
- break;
- }
-- for (t = buf; ISDIGIT (*t) || *t == ','; t++)
-- continue;
-- this_line_is_command = (ISDIGIT (*buf) &&
-- (*t == 'd' || *t == 'c' || *t == 'a' || *t == 'i' || *t == 's') );
-- if (this_line_is_command) {
-+ ed_command_letter = get_ed_command_letter (buf);
-+ if (ed_command_letter) {
- if (pipefp)
- if (! fwrite (buf, sizeof *buf, chars_read, pipefp))
- write_fatal ();
-- if (*t != 'd' && *t != 's') {
-+ if (ed_command_letter != 'd' && ed_command_letter != 's') {
-+ p_pass_comments_through = true;
- while ((chars_read = get_line ()) != 0) {
- if (pipefp)
- if (! fwrite (buf, sizeof *buf, chars_read, pipefp))
-@@ -1883,6 +1976,7 @@
- if (chars_read == 2 && strEQ (buf, ".\n"))
- break;
- }
-+ p_pass_comments_through = false;
- }
- }
- else {
-diff -urNd -urNd patch-2.5.4/pch.h patch-2.5.9/pch.h
---- patch-2.5.4/pch.h 1997-06-13 02:28:37.000000000 -0400
-+++ patch-2.5.9/pch.h 2003-05-20 09:56:02.000000000 -0400
-@@ -1,25 +1,45 @@
- /* reading patches */
-
--/* $Id: pch.h,v 1.8 1997/06/13 06:28:37 eggert Exp $ */
-+/* $Id: pch.h,v 1.11 2003/05/20 13:56:03 eggert Exp $ */
-
--LINENUM pch_end PARAMS ((void));
--LINENUM pch_first PARAMS ((void));
--LINENUM pch_hunk_beg PARAMS ((void));
--LINENUM pch_newfirst PARAMS ((void));
--LINENUM pch_prefix_context PARAMS ((void));
--LINENUM pch_ptrn_lines PARAMS ((void));
--LINENUM pch_repl_lines PARAMS ((void));
--LINENUM pch_suffix_context PARAMS ((void));
--bool pch_swap PARAMS ((void));
--bool pch_write_line PARAMS ((LINENUM, FILE *));
--bool there_is_another_patch PARAMS ((void));
--char *pfetch PARAMS ((LINENUM));
--char pch_char PARAMS ((LINENUM));
--int another_hunk PARAMS ((enum diff, int));
--int pch_says_nonexistent PARAMS ((int));
--size_t pch_line_len PARAMS ((LINENUM));
--time_t pch_timestamp PARAMS ((int));
--void do_ed_script PARAMS ((FILE *));
--void open_patch_file PARAMS ((char const *));
--void re_patch PARAMS ((void));
--void set_hunkmax PARAMS ((void));
-+/* Copyright (C) 1986, 1987, 1988 Larry Wall
-+
-+ Copyright (C) 1990, 1991, 1992, 1993, 1997, 1998, 1999, 2000, 2001,
-+ 2002, 2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; see the file COPYING.
-+ If not, write to the Free Software Foundation,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+LINENUM pch_end (void);
-+LINENUM pch_first (void);
-+LINENUM pch_hunk_beg (void);
-+LINENUM pch_newfirst (void);
-+LINENUM pch_prefix_context (void);
-+LINENUM pch_ptrn_lines (void);
-+LINENUM pch_repl_lines (void);
-+LINENUM pch_suffix_context (void);
-+bool pch_swap (void);
-+bool pch_write_line (LINENUM, FILE *);
-+bool there_is_another_patch (void);
-+char *pfetch (LINENUM);
-+char pch_char (LINENUM);
-+int another_hunk (enum diff, bool);
-+int pch_says_nonexistent (bool);
-+size_t pch_line_len (LINENUM);
-+time_t pch_timestamp (bool);
-+void do_ed_script (FILE *);
-+void open_patch_file (char const *);
-+void re_patch (void);
-+void set_hunkmax (void);
-diff -urNd -urNd patch-2.5.4/quotearg.c patch-2.5.9/quotearg.c
---- patch-2.5.4/quotearg.c 1999-08-23 05:55:55.000000000 -0400
-+++ patch-2.5.9/quotearg.c 2002-11-23 01:45:49.000000000 -0500
-@@ -1,5 +1,5 @@
- /* quotearg.c - quote arguments for output
-- Copyright (C) 1998, 1999 Free Software Foundation, Inc.
-+ Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -17,51 +17,59 @@
-
- /* Written by Paul Eggert <eggert at twinsun.com> */
-
--/* FIXME: Multibyte characters are not supported yet. */
--
- #if HAVE_CONFIG_H
- # include <config.h>
- #endif
-
--#include <sys/types.h>
--#include <quotearg.h>
--#include <xalloc.h>
-+#include "quotearg.h"
-+
-+#include "xalloc.h"
-
- #include <ctype.h>
--#if defined (STDC_HEADERS) || (!defined (isascii) && !defined (HAVE_ISASCII))
--# define ISASCII(c) 1
--#else
--# define ISASCII(c) isascii (c)
--#endif
--#ifdef isgraph
--# define ISGRAPH(c) (ISASCII (c) && isgraph (c))
--#else
--# define ISGRAPH(c) (ISASCII (c) && isprint (c) && !isspace (c))
--#endif
-+#include <errno.h>
-+#include <limits.h>
-+#include <stdlib.h>
-+#include <string.h>
-
--#if ENABLE_NLS
--# include <libintl.h>
--# define _(text) gettext (text)
--#else
--# define _(text) text
--#endif
-+#include "gettext.h"
-+#define _(msgid) gettext (msgid)
-+#define N_(msgid) msgid
-
--#if HAVE_LIMITS_H
--# include <limits.h>
-+#if HAVE_WCHAR_H
-+
-+/* BSD/OS 4.1 wchar.h requires FILE and struct tm to be declared. */
-+# include <stdio.h>
-+# include <time.h>
-+
-+# include <wchar.h>
- #endif
--#ifndef CHAR_BIT
--# define CHAR_BIT 8
-+
-+#if !HAVE_MBRTOWC
-+/* Disable multibyte processing entirely. Since MB_CUR_MAX is 1, the
-+ other macros are defined only for documentation and to satisfy C
-+ syntax. */
-+# undef MB_CUR_MAX
-+# define MB_CUR_MAX 1
-+# define mbrtowc(pwc, s, n, ps) ((*(pwc) = *(s)) != 0)
-+# define iswprint(wc) isprint ((unsigned char) (wc))
-+# undef HAVE_MBSINIT
- #endif
--#ifndef UCHAR_MAX
--# define UCHAR_MAX ((unsigned char) -1)
-+
-+#if !defined mbsinit && !HAVE_MBSINIT
-+# define mbsinit(ps) 1
- #endif
-
--#if HAVE_STDLIB_H
--# include <stdlib.h>
-+#ifndef iswprint
-+# if HAVE_WCTYPE_H
-+# include <wctype.h>
-+# endif
-+# if !defined iswprint && !HAVE_ISWPRINT
-+# define iswprint(wc) 1
-+# endif
- #endif
-
--#if HAVE_STRING_H
--# include <string.h>
-+#ifndef SIZE_MAX
-+# define SIZE_MAX ((size_t) -1)
- #endif
-
- #define INT_BITS (sizeof (int) * CHAR_BIT)
-@@ -73,8 +81,7 @@
-
- /* Quote the characters indicated by this bit vector even if the
- quoting style would not normally require them to be quoted. */
-- int quote_these_too[((UCHAR_MAX + 1) / INT_BITS
-- + ((UCHAR_MAX + 1) % INT_BITS != 0))];
-+ int quote_these_too[(UCHAR_MAX / INT_BITS) + 1];
- };
-
- /* Names of quoting styles. */
-@@ -86,6 +93,7 @@
- "c",
- "escape",
- "locale",
-+ "clocale",
- 0
- };
-
-@@ -97,7 +105,8 @@
- shell_always_quoting_style,
- c_quoting_style,
- escape_quoting_style,
-- locale_quoting_style
-+ locale_quoting_style,
-+ clocale_quoting_style
- };
-
- /* The default quoting options. */
-@@ -109,9 +118,10 @@
- struct quoting_options *
- clone_quoting_options (struct quoting_options *o)
- {
-- struct quoting_options *p
-- = (struct quoting_options *) xmalloc (sizeof (struct quoting_options));
-+ int e = errno;
-+ struct quoting_options *p = xmalloc (sizeof *p);
- *p = *(o ? o : &default_quoting_options);
-+ errno = e;
- return p;
- }
-
-@@ -146,77 +156,92 @@
- return r;
- }
-
-+/* MSGID approximates a quotation mark. Return its translation if it
-+ has one; otherwise, return either it or "\"", depending on S. */
-+static char const *
-+gettext_quote (char const *msgid, enum quoting_style s)
-+{
-+ char const *translation = _(msgid);
-+ if (translation == msgid && s == clocale_quoting_style)
-+ translation = "\"";
-+ return translation;
-+}
-+
- /* Place into buffer BUFFER (of size BUFFERSIZE) a quoted version of
-- argument ARG (of size ARGSIZE), using O to control quoting.
-- If O is null, use the default.
-+ argument ARG (of size ARGSIZE), using QUOTING_STYLE and the
-+ non-quoting-style part of O to control quoting.
- Terminate the output with a null character, and return the written
- size of the output, not counting the terminating null.
- If BUFFERSIZE is too small to store the output string, return the
- value that would have been returned had BUFFERSIZE been large enough.
-- If ARGSIZE is -1, use the string length of the argument for ARGSIZE. */
--size_t
--quotearg_buffer (char *buffer, size_t buffersize,
-- char const *arg, size_t argsize,
-- struct quoting_options const *o)
-+ If ARGSIZE is -1, use the string length of the argument for ARGSIZE.
-+
-+ This function acts like quotearg_buffer (BUFFER, BUFFERSIZE, ARG,
-+ ARGSIZE, O), except it uses QUOTING_STYLE instead of the quoting
-+ style specified by O, and O may not be null. */
-+
-+static size_t
-+quotearg_buffer_restyled (char *buffer, size_t buffersize,
-+ char const *arg, size_t argsize,
-+ enum quoting_style quoting_style,
-+ struct quoting_options const *o)
- {
-- unsigned char c;
- size_t i;
- size_t len = 0;
-- char const *quote_string;
-- size_t quote_string_len;
-- struct quoting_options const *p = o ? o : &default_quoting_options;
-- enum quoting_style quoting_style = p->style;
-+ char const *quote_string = 0;
-+ size_t quote_string_len = 0;
-+ int backslash_escapes = 0;
-+ int unibyte_locale = MB_CUR_MAX == 1;
-+
- #define STORE(c) \
- do \
- { \
- if (len < buffersize) \
- buffer[len] = (c); \
-- len++; \
-+ len++; \
- } \
- while (0)
-
- switch (quoting_style)
- {
-- case shell_quoting_style:
-- if (! (argsize == (size_t) -1 ? arg[0] == '\0' : argsize == 0))
-- {
-- switch (arg[0])
-- {
-- case '#': case '~':
-- break;
--
-- default:
-- for (i = 0; ; i++)
-- {
-- if (argsize == (size_t) -1 ? arg[i] == '\0' : i == argsize)
-- goto done;
-+ case c_quoting_style:
-+ STORE ('"');
-+ backslash_escapes = 1;
-+ quote_string = "\"";
-+ quote_string_len = 1;
-+ break;
-
-- c = arg[i];
-+ case escape_quoting_style:
-+ backslash_escapes = 1;
-+ break;
-
-- switch (c)
-- {
-- case '\t': case '\n': case ' ':
-- case '!': /* special in csh */
-- case '"': case '$': case '&': case '\'':
-- case '(': case ')': case '*': case ';':
-- case '<': case '>': case '?': case '[': case '\\':
-- case '^': /* special in old /bin/sh, e.g. SunOS 4.1.4 */
-- case '`': case '|':
-- goto needs_quoting;
-- }
-+ case locale_quoting_style:
-+ case clocale_quoting_style:
-+ {
-+ /* Get translations for open and closing quotation marks.
-
-- if (p->quote_these_too[c / INT_BITS] & (1 << (c % INT_BITS)))
-- goto needs_quoting;
-+ The message catalog should translate "`" to a left
-+ quotation mark suitable for the locale, and similarly for
-+ "'". If the catalog has no translation,
-+ locale_quoting_style quotes `like this', and
-+ clocale_quoting_style quotes "like this".
-
-- STORE (c);
-- }
-- needs_quoting:;
-+ For example, an American English Unicode locale should
-+ translate "`" to U+201C (LEFT DOUBLE QUOTATION MARK), and
-+ should translate "'" to U+201D (RIGHT DOUBLE QUOTATION
-+ MARK). A British English Unicode locale should instead
-+ translate these to U+2018 (LEFT SINGLE QUOTATION MARK) and
-+ U+2019 (RIGHT SINGLE QUOTATION MARK), respectively. */
-
-- len = 0;
-- break;
-- }
-- }
-- /* Fall through. */
-+ char const *left = gettext_quote (N_("`"), quoting_style);
-+ char const *right = gettext_quote (N_("'"), quoting_style);
-+ for (quote_string = left; *quote_string; quote_string++)
-+ STORE (*quote_string);
-+ backslash_escapes = 1;
-+ quote_string = right;
-+ quote_string_len = strlen (quote_string);
-+ }
-+ break;
-
- case shell_always_quoting_style:
- STORE ('\'');
-@@ -224,84 +249,225 @@
- quote_string_len = 1;
- break;
-
-- case c_quoting_style:
-- STORE ('"');
-- quote_string = "\"";
-- quote_string_len = 1;
-- break;
--
-- case locale_quoting_style:
-- for (quote_string = _("`"); *quote_string; quote_string++)
-- STORE (*quote_string);
-- quote_string = _("'");
-- quote_string_len = strlen (quote_string);
-- break;
--
- default:
-- quote_string = 0;
-- quote_string_len = 0;
- break;
- }
-
-- for (i = 0; ! (argsize == (size_t) -1 ? arg[i] == '\0' : i == argsize); i++)
-+ for (i = 0; ! (argsize == SIZE_MAX ? arg[i] == '\0' : i == argsize); i++)
- {
-- c = arg[i];
-+ unsigned char c;
-+ unsigned char esc;
-
-- switch (quoting_style)
-+ if (backslash_escapes
-+ && quote_string_len
-+ && i + quote_string_len <= argsize
-+ && memcmp (arg + i, quote_string, quote_string_len) == 0)
-+ STORE ('\\');
-+
-+ c = arg[i];
-+ switch (c)
- {
-- case literal_quoting_style:
-+ case '\0':
-+ if (backslash_escapes)
-+ {
-+ STORE ('\\');
-+ STORE ('0');
-+ STORE ('0');
-+ c = '0';
-+ }
- break;
-
-- case shell_quoting_style:
-- case shell_always_quoting_style:
-- if (c == '\'')
-+ case '?':
-+ switch (quoting_style)
- {
-- STORE ('\'');
-- STORE ('\\');
-- STORE ('\'');
-+ case shell_quoting_style:
-+ goto use_shell_always_quoting_style;
-+
-+ case c_quoting_style:
-+ if (i + 2 < argsize && arg[i + 1] == '?')
-+ switch (arg[i + 2])
-+ {
-+ case '!': case '\'':
-+ case '(': case ')': case '-': case '/':
-+ case '<': case '=': case '>':
-+ /* Escape the second '?' in what would otherwise be
-+ a trigraph. */
-+ c = arg[i + 2];
-+ i += 2;
-+ STORE ('?');
-+ STORE ('\\');
-+ STORE ('?');
-+ break;
-+ }
-+ break;
-+
-+ default:
-+ break;
- }
- break;
-
-- case c_quoting_style:
-- case escape_quoting_style:
-- case locale_quoting_style:
-- switch (c)
-+ case '\a': esc = 'a'; goto c_escape;
-+ case '\b': esc = 'b'; goto c_escape;
-+ case '\f': esc = 'f'; goto c_escape;
-+ case '\n': esc = 'n'; goto c_and_shell_escape;
-+ case '\r': esc = 'r'; goto c_and_shell_escape;
-+ case '\t': esc = 't'; goto c_and_shell_escape;
-+ case '\v': esc = 'v'; goto c_escape;
-+ case '\\': esc = c; goto c_and_shell_escape;
-+
-+ c_and_shell_escape:
-+ if (quoting_style == shell_quoting_style)
-+ goto use_shell_always_quoting_style;
-+ c_escape:
-+ if (backslash_escapes)
- {
-- case '?': /* Do not generate trigraphs. */
-- case '\\': goto store_escape;
-- /* Not all C compilers know what \a means. */
-- case 7 : c = 'a'; goto store_escape;
-- case '\b': c = 'b'; goto store_escape;
-- case '\f': c = 'f'; goto store_escape;
-- case '\n': c = 'n'; goto store_escape;
-- case '\r': c = 'r'; goto store_escape;
-- case '\t': c = 't'; goto store_escape;
-- case '\v': c = 'v'; goto store_escape;
-+ c = esc;
-+ goto store_escape;
-+ }
-+ break;
-
-- case ' ': break;
-+ case '#': case '~':
-+ if (i != 0)
-+ break;
-+ /* Fall through. */
-+ case ' ':
-+ case '!': /* special in bash */
-+ case '"': case '$': case '&':
-+ case '(': case ')': case '*': case ';':
-+ case '<': case '>': case '[':
-+ case '^': /* special in old /bin/sh, e.g. SunOS 4.1.4 */
-+ case '`': case '|':
-+ /* A shell special character. In theory, '$' and '`' could
-+ be the first bytes of multibyte characters, which means
-+ we should check them with mbrtowc, but in practice this
-+ doesn't happen so it's not worth worrying about. */
-+ if (quoting_style == shell_quoting_style)
-+ goto use_shell_always_quoting_style;
-+ break;
-+
-+ case '\'':
-+ switch (quoting_style)
-+ {
-+ case shell_quoting_style:
-+ goto use_shell_always_quoting_style;
-+
-+ case shell_always_quoting_style:
-+ STORE ('\'');
-+ STORE ('\\');
-+ STORE ('\'');
-+ break;
-
- default:
-- if (quote_string_len
-- && strncmp (arg + i, quote_string, quote_string_len) == 0)
-- goto store_escape;
-- if (!ISGRAPH (c))
-- {
-- STORE ('\\');
-- STORE ('0' + (c >> 6));
-- STORE ('0' + ((c >> 3) & 7));
-- c = '0' + (c & 7);
-- goto store_c;
-- }
- break;
- }
-+ break;
-
-- if (! (p->quote_these_too[c / INT_BITS] & (1 << (c % INT_BITS))))
-- goto store_c;
-+ case '%': case '+': case ',': case '-': case '.': case '/':
-+ case '0': case '1': case '2': case '3': case '4': case '5':
-+ case '6': case '7': case '8': case '9': case ':': case '=':
-+ case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
-+ case 'G': case 'H': case 'I': case 'J': case 'K': case 'L':
-+ case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R':
-+ case 'S': case 'T': case 'U': case 'V': case 'W': case 'X':
-+ case 'Y': case 'Z': case ']': case '_': case 'a': case 'b':
-+ case 'c': case 'd': case 'e': case 'f': case 'g': case 'h':
-+ case 'i': case 'j': case 'k': case 'l': case 'm': case 'n':
-+ case 'o': case 'p': case 'q': case 'r': case 's': case 't':
-+ case 'u': case 'v': case 'w': case 'x': case 'y': case 'z':
-+ case '{': case '}':
-+ /* These characters don't cause problems, no matter what the
-+ quoting style is. They cannot start multibyte sequences. */
-+ break;
-
-- store_escape:
-- STORE ('\\');
-+ default:
-+ /* If we have a multibyte sequence, copy it until we reach
-+ its end, find an error, or come back to the initial shift
-+ state. For C-like styles, if the sequence has
-+ unprintable characters, escape the whole sequence, since
-+ we can't easily escape single characters within it. */
-+ {
-+ /* Length of multibyte sequence found so far. */
-+ size_t m;
-+
-+ int printable;
-+
-+ if (unibyte_locale)
-+ {
-+ m = 1;
-+ printable = isprint (c);
-+ }
-+ else
-+ {
-+ mbstate_t mbstate;
-+ memset (&mbstate, 0, sizeof mbstate);
-+
-+ m = 0;
-+ printable = 1;
-+ if (argsize == SIZE_MAX)
-+ argsize = strlen (arg);
-+
-+ do
-+ {
-+ wchar_t w;
-+ size_t bytes = mbrtowc (&w, &arg[i + m],
-+ argsize - (i + m), &mbstate);
-+ if (bytes == 0)
-+ break;
-+ else if (bytes == (size_t) -1)
-+ {
-+ printable = 0;
-+ break;
-+ }
-+ else if (bytes == (size_t) -2)
-+ {
-+ printable = 0;
-+ while (i + m < argsize && arg[i + m])
-+ m++;
-+ break;
-+ }
-+ else
-+ {
-+ if (! iswprint (w))
-+ printable = 0;
-+ m += bytes;
-+ }
-+ }
-+ while (! mbsinit (&mbstate));
-+ }
-+
-+ if (1 < m || (backslash_escapes && ! printable))
-+ {
-+ /* Output a multibyte sequence, or an escaped
-+ unprintable unibyte character. */
-+ size_t ilim = i + m;
-+
-+ for (;;)
-+ {
-+ if (backslash_escapes && ! printable)
-+ {
-+ STORE ('\\');
-+ STORE ('0' + (c >> 6));
-+ STORE ('0' + ((c >> 3) & 7));
-+ c = '0' + (c & 7);
-+ }
-+ if (ilim <= i + 1)
-+ break;
-+ STORE (c);
-+ c = arg[++i];
-+ }
-+
-+ goto store_c;
-+ }
-+ }
- }
-
-+ if (! (backslash_escapes
-+ && o->quote_these_too[c / INT_BITS] & (1 << (c % INT_BITS))))
-+ goto store_c;
-+
-+ store_escape:
-+ STORE ('\\');
-+
- store_c:
- STORE (c);
- }
-@@ -310,60 +476,105 @@
- for (; *quote_string; quote_string++)
- STORE (*quote_string);
-
-- done:
- if (len < buffersize)
- buffer[len] = '\0';
- return len;
-+
-+ use_shell_always_quoting_style:
-+ return quotearg_buffer_restyled (buffer, buffersize, arg, argsize,
-+ shell_always_quoting_style, o);
- }
-
--/* Use storage slot N to return a quoted version of the string ARG.
-+/* Place into buffer BUFFER (of size BUFFERSIZE) a quoted version of
-+ argument ARG (of size ARGSIZE), using O to control quoting.
-+ If O is null, use the default.
-+ Terminate the output with a null character, and return the written
-+ size of the output, not counting the terminating null.
-+ If BUFFERSIZE is too small to store the output string, return the
-+ value that would have been returned had BUFFERSIZE been large enough.
-+ If ARGSIZE is -1, use the string length of the argument for ARGSIZE. */
-+size_t
-+quotearg_buffer (char *buffer, size_t buffersize,
-+ char const *arg, size_t argsize,
-+ struct quoting_options const *o)
-+{
-+ struct quoting_options const *p = o ? o : &default_quoting_options;
-+ int e = errno;
-+ size_t r = quotearg_buffer_restyled (buffer, buffersize, arg, argsize,
-+ p->style, p);
-+ errno = e;
-+ return r;
-+}
-+
-+/* Use storage slot N to return a quoted version of argument ARG.
-+ ARG is of size ARGSIZE, but if that is -1, ARG is a null-terminated string.
- OPTIONS specifies the quoting options.
- The returned value points to static storage that can be
- reused by the next call to this function with the same value of N.
-- N must be nonnegative. N is deliberately declared with type `int'
-+ N must be nonnegative. N is deliberately declared with type "int"
- to allow for future extensions (using negative values). */
- static char *
--quotearg_n_options (int n, char const *arg,
-+quotearg_n_options (int n, char const *arg, size_t argsize,
- struct quoting_options const *options)
- {
-- static unsigned int nslots;
-- static struct slotvec
-+ int e = errno;
-+
-+ /* Preallocate a slot 0 buffer, so that the caller can always quote
-+ one small component of a "memory exhausted" message in slot 0. */
-+ static char slot0[256];
-+ static unsigned int nslots = 1;
-+ unsigned int n0 = n;
-+ struct slotvec
- {
- size_t size;
- char *val;
-- } *slotvec;
-+ };
-+ static struct slotvec slotvec0 = {sizeof slot0, slot0};
-+ static struct slotvec *slotvec = &slotvec0;
-
-- if (nslots <= n)
-+ if (n < 0)
-+ abort ();
-+
-+ if (nslots <= n0)
- {
-- int n1 = n + 1;
-- size_t s = n1 * sizeof (struct slotvec);
-- if (! (0 < n1 && n1 == s / sizeof (struct slotvec)))
-- abort ();
-- slotvec = (struct slotvec *) xrealloc (slotvec, s);
-- memset (slotvec + nslots, 0, (n1 - nslots) * sizeof (struct slotvec));
-- nslots = n;
-+ unsigned int n1 = n0 + 1;
-+ size_t s = n1 * sizeof *slotvec;
-+
-+ if (SIZE_MAX / UINT_MAX <= sizeof *slotvec
-+ && n1 != s / sizeof *slotvec)
-+ xalloc_die ();
-+
-+ if (slotvec == &slotvec0)
-+ {
-+ slotvec = xmalloc (sizeof *slotvec);
-+ *slotvec = slotvec0;
-+ }
-+ slotvec = xrealloc (slotvec, s);
-+ memset (slotvec + nslots, 0, (n1 - nslots) * sizeof *slotvec);
-+ nslots = n1;
- }
-
- {
- size_t size = slotvec[n].size;
- char *val = slotvec[n].val;
-- size_t qsize = quotearg_buffer (val, size, arg, (size_t) -1, options);
-+ size_t qsize = quotearg_buffer (val, size, arg, argsize, options);
-
- if (size <= qsize)
- {
- slotvec[n].size = size = qsize + 1;
-- slotvec[n].val = val = xrealloc (val, size);
-- quotearg_buffer (val, size, arg, (size_t) -1, options);
-+ slotvec[n].val = val = xrealloc (val == slot0 ? 0 : val, size);
-+ quotearg_buffer (val, size, arg, argsize, options);
- }
-
-+ errno = e;
- return val;
- }
- }
-
- char *
--quotearg_n (unsigned int n, char const *arg)
-+quotearg_n (int n, char const *arg)
- {
-- return quotearg_n_options (n, arg, &default_quoting_options);
-+ return quotearg_n_options (n, arg, SIZE_MAX, &default_quoting_options);
- }
-
- char *
-@@ -372,13 +583,29 @@
- return quotearg_n (0, arg);
- }
-
--char *
--quotearg_n_style (unsigned int n, enum quoting_style s, char const *arg)
-+/* Return quoting options for STYLE, with no extra quoting. */
-+static struct quoting_options
-+quoting_options_from_style (enum quoting_style style)
- {
- struct quoting_options o;
-- o.style = s;
-+ o.style = style;
- memset (o.quote_these_too, 0, sizeof o.quote_these_too);
-- return quotearg_n_options (n, arg, &o);
-+ return o;
-+}
-+
-+char *
-+quotearg_n_style (int n, enum quoting_style s, char const *arg)
-+{
-+ struct quoting_options const o = quoting_options_from_style (s);
-+ return quotearg_n_options (n, arg, SIZE_MAX, &o);
-+}
-+
-+char *
-+quotearg_n_style_mem (int n, enum quoting_style s,
-+ char const *arg, size_t argsize)
-+{
-+ struct quoting_options const o = quoting_options_from_style (s);
-+ return quotearg_n_options (n, arg, argsize, &o);
- }
-
- char *
-@@ -393,7 +620,7 @@
- struct quoting_options options;
- options = default_quoting_options;
- set_char_quoting (&options, ch, 1);
-- return quotearg_n_options (0, arg, &options);
-+ return quotearg_n_options (0, arg, SIZE_MAX, &options);
- }
-
- char *
-diff -urNd -urNd patch-2.5.4/quotearg.h patch-2.5.9/quotearg.h
---- patch-2.5.4/quotearg.h 1999-08-09 19:09:13.000000000 -0400
-+++ patch-2.5.9/quotearg.h 2002-11-23 01:45:22.000000000 -0500
-@@ -1,5 +1,7 @@
- /* quotearg.h - quote arguments for output
-- Copyright (C) 1998, 1999 Free Software Foundation, Inc.
-+
-+ Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software
-+ Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -17,6 +19,11 @@
-
- /* Written by Paul Eggert <eggert at twinsun.com> */
-
-+#ifndef QUOTEARG_H_
-+# define QUOTEARG_H_ 1
-+
-+# include <stddef.h>
-+
- /* Basic quoting styles. */
- enum quoting_style
- {
-@@ -25,13 +32,14 @@
- shell_always_quoting_style, /* --quoting-style=shell-always */
- c_quoting_style, /* --quoting-style=c */
- escape_quoting_style, /* --quoting-style=escape */
-- locale_quoting_style /* --quoting-style=locale */
-+ locale_quoting_style, /* --quoting-style=locale */
-+ clocale_quoting_style /* --quoting-style=clocale */
- };
-
- /* For now, --quoting-style=literal is the default, but this may change. */
--#ifndef DEFAULT_QUOTING_STYLE
--# define DEFAULT_QUOTING_STYLE literal_quoting_style
--#endif
-+# ifndef DEFAULT_QUOTING_STYLE
-+# define DEFAULT_QUOTING_STYLE literal_quoting_style
-+# endif
-
- /* Names of quoting styles and their corresponding values. */
- extern char const *const quoting_style_args[];
-@@ -39,37 +47,27 @@
-
- struct quoting_options;
-
--#ifndef PARAMS
--# if defined PROTOTYPES || defined __STDC__
--# define PARAMS(Args) Args
--# else
--# define PARAMS(Args) ()
--# endif
--#endif
--
- /* The functions listed below set and use a hidden variable
- that contains the default quoting style options. */
-
- /* Allocate a new set of quoting options, with contents initially identical
- to O if O is not null, or to the default if O is null.
- It is the caller's responsibility to free the result. */
--struct quoting_options *clone_quoting_options
-- PARAMS ((struct quoting_options *o));
-+struct quoting_options *clone_quoting_options (struct quoting_options *o);
-
- /* Get the value of O's quoting style. If O is null, use the default. */
--enum quoting_style get_quoting_style PARAMS ((struct quoting_options *o));
-+enum quoting_style get_quoting_style (struct quoting_options *o);
-
- /* In O (or in the default if O is null),
- set the value of the quoting style to S. */
--void set_quoting_style PARAMS ((struct quoting_options *o,
-- enum quoting_style s));
-+void set_quoting_style (struct quoting_options *o, enum quoting_style s);
-
- /* In O (or in the default if O is null),
- set the value of the quoting options for character C to I.
- Return the old value. Currently, the only values defined for I are
- 0 (the default) and 1 (which means to quote the character even if
- it would not otherwise be quoted). */
--int set_char_quoting PARAMS ((struct quoting_options *o, char c, int i));
-+int set_char_quoting (struct quoting_options *o, char c, int i);
-
- /* Place into buffer BUFFER (of size BUFFERSIZE) a quoted version of
- argument ARG (of size ARGSIZE), using O to control quoting.
-@@ -79,31 +77,38 @@
- If BUFFERSIZE is too small to store the output string, return the
- value that would have been returned had BUFFERSIZE been large enough.
- If ARGSIZE is -1, use the string length of the argument for ARGSIZE. */
--size_t quotearg_buffer PARAMS ((char *buffer, size_t buffersize,
-- char const *arg, size_t argsize,
-- struct quoting_options const *o));
-+size_t quotearg_buffer (char *buffer, size_t buffersize,
-+ char const *arg, size_t argsize,
-+ struct quoting_options const *o);
-
- /* Use storage slot N to return a quoted version of the string ARG.
- Use the default quoting options.
- The returned value points to static storage that can be
- reused by the next call to this function with the same value of N.
- N must be nonnegative. */
--char *quotearg_n PARAMS ((unsigned int n, char const *arg));
-+char *quotearg_n (int n, char const *arg);
-
- /* Equivalent to quotearg_n (0, ARG). */
--char *quotearg PARAMS ((char const *arg));
-+char *quotearg (char const *arg);
-
- /* Use style S and storage slot N to return a quoted version of the string ARG.
- This is like quotearg_n (N, ARG), except that it uses S with no other
- options to specify the quoting method. */
--char *quotearg_n_style PARAMS ((unsigned int n, enum quoting_style s,
-- char const *arg));
-+char *quotearg_n_style (int n, enum quoting_style s, char const *arg);
-+
-+/* Use style S and storage slot N to return a quoted version of the
-+ argument ARG of size ARGSIZE. This is like quotearg_n_style
-+ (N, S, ARG), except it can quote null bytes. */
-+char *quotearg_n_style_mem (int n, enum quoting_style s,
-+ char const *arg, size_t argsize);
-
- /* Equivalent to quotearg_n_style (0, S, ARG). */
--char *quotearg_style PARAMS ((enum quoting_style s, char const *arg));
-+char *quotearg_style (enum quoting_style s, char const *arg);
-
- /* Like quotearg (ARG), except also quote any instances of CH. */
--char *quotearg_char PARAMS ((char const *arg, char ch));
-+char *quotearg_char (char const *arg, char ch);
-
- /* Equivalent to quotearg_char (ARG, ':'). */
--char *quotearg_colon PARAMS ((char const *arg));
-+char *quotearg_colon (char const *arg);
-+
-+#endif /* !QUOTEARG_H_ */
-diff -urNd -urNd patch-2.5.4/quote.c patch-2.5.9/quote.c
---- patch-2.5.4/quote.c 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/quote.c 2003-03-18 03:50:56.000000000 -0500
-@@ -0,0 +1,45 @@
-+/* quote.c - quote arguments for output
-+ Copyright (C) 1998, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software Foundation,
-+ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+/* Written by Paul Eggert <eggert at twinsun.com> */
-+
-+#if HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#if HAVE_STDDEF_H
-+# include <stddef.h> /* For the definition of size_t on windows w/MSVC. */
-+#endif
-+#include <sys/types.h>
-+#include "quotearg.h"
-+#include "quote.h"
-+
-+/* Return an unambiguous printable representation of NAME,
-+ allocated in slot N, suitable for diagnostics. */
-+char const *
-+quote_n (int n, char const *name)
-+{
-+ return quotearg_n_style (n, locale_quoting_style, name);
-+}
-+
-+/* Return an unambiguous printable representation of NAME,
-+ suitable for diagnostics. */
-+char const *
-+quote (char const *name)
-+{
-+ return quote_n (0, name);
-+}
-diff -urNd -urNd patch-2.5.4/quote.h patch-2.5.9/quote.h
---- patch-2.5.4/quote.h 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/quote.h 2002-11-23 02:23:50.000000000 -0500
-@@ -0,0 +1,28 @@
-+/* quote.h - prototypes for quote.c
-+ Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software Foundation,
-+ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+
-+#ifndef PARAMS
-+# if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-+# define PARAMS(Args) Args
-+# else
-+# define PARAMS(Args) ()
-+# endif
-+#endif
-+
-+char const *quote_n PARAMS ((int n, char const *name));
-+char const *quote PARAMS ((char const *name));
-diff -urNd -urNd patch-2.5.4/README patch-2.5.9/README
---- patch-2.5.4/README 1997-05-26 01:34:43.000000000 -0400
-+++ patch-2.5.9/README 2002-06-03 00:51:09.000000000 -0400
-@@ -5,16 +5,16 @@
- * making GNU Emacs-style backup files
- * improved interaction with RCS and SCCS
- * the GNU conventions for option parsing and configuring and compilation.
-- * better POSIX.2 compliance
-+ * better POSIX compliance
- They also fix some bugs. See the NEWS and ChangeLog files for details.
-
- Tutorial-style documentation for patch is included in the GNU
--diffutils package. Unfortunately, the diffutils 2.7 documentation
--for `patch' is obsolete; this should be fixed in diffutils 2.8.
--In the mean time, see `patch --help', or consult the man page
--in this distribution.
-+Diffutils package; get GNU Diffutils 2.8 or later for up-to-date
-+documentation for patch.
-
- For GNU and Unix build and installation instructions, see the file INSTALL.
-+Use `configure --disable-largefile' to disable large file support;
-+this is reportedly necessary on Red Hat GNU/Linux 6.0 to avoid a C library bug.
- For MS-DOS using DJGPP tools, see the file pc/djgpp/README.
- For other systems, copy config.hin to config.h and change
- #undef statements in it to #define as appropriate for your system,
-@@ -22,7 +22,7 @@
- enclosed in @ signs as appropriate for your system.
-
- Please send bug reports for this version of patch to
--bug-gnu-utils at prep.ai.mit.edu.
-+<bug-patch at gnu.org>.
-
- The Free Software Foundation is distributing this version of patch
- independently because as of this writing, Larry Wall has not released a
-@@ -33,8 +33,10 @@
-
- ------
-
--Copyright 1984, 1985, 1986, 1987, 1988 Larry Wall
--Copyright 1989, 1990, 1991, 1992, 1993, 1997 Free Software Foundation, Inc.
-+Copyright (C) 1984, 1985, 1986, 1987, 1988 Larry Wall
-+
-+Copyright (C) 1989, 1990, 1991, 1992, 1993, 1997, 1999, 2002 Free
-+Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-diff -urNd -urNd patch-2.5.4/rename.c patch-2.5.9/rename.c
---- patch-2.5.4/rename.c 1999-03-29 18:56:19.000000000 -0500
-+++ patch-2.5.9/rename.c 1969-12-31 19:00:00.000000000 -0500
-@@ -1,113 +0,0 @@
--/* BSD compatible rename and directory rename function for System V.
-- Copyright (C) 1988, 1990 Free Software Foundation, Inc.
--
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2, or (at your option)
-- any later version.
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
--
--#if HAVE_CONFIG_H
--# include <config.h>
--#endif
--
--#include <sys/types.h>
--#include <sys/stat.h>
--#include <errno.h>
--#ifndef errno
--extern int errno;
--#endif
--
--#if STAT_MACROS_BROKEN
--# undef S_ISDIR
--#endif
--
--#if !defined(S_ISDIR) && defined(S_IFDIR)
--# define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
--#endif
--
--/* Rename file FROM to file TO.
-- Return 0 if successful, -1 if not. */
--
--int
--rename (char *from, char *to)
--{
-- struct stat from_stats, to_stats;
--
-- if (stat (from, &from_stats))
-- return -1;
--
-- /* Be careful not to unlink `from' if it happens to be equal to `to' or
-- (on filesystems that silently truncate filenames after 14 characters)
-- if `from' and `to' share the significant characters. */
-- if (stat (to, &to_stats))
-- {
-- if (errno != ENOENT)
-- return -1;
-- }
-- else
-- {
-- if ((from_stats.st_dev == to_stats.st_dev)
-- && (from_stats.st_ino == to_stats.st_ino))
-- /* `from' and `to' designate the same file on that filesystem. */
-- return 0;
--
-- if (unlink (to) && errno != ENOENT)
-- return -1;
-- }
--
--#ifdef MVDIR
--
--/* If MVDIR is defined, it should be the full filename of a setuid root
-- program able to link and unlink directories. If MVDIR is not defined,
-- then the capability of renaming directories may be missing. */
--
-- if (S_ISDIR (from_stats.st_mode))
-- {
-- /* Need a setuid root process to link and unlink directories. */
-- int status;
-- pid_t pid = fork ();
-- switch (pid)
-- {
-- case -1: /* Error. */
-- return -1; /* errno already set */
--
-- case 0: /* Child. */
-- execl (MVDIR, "mvdir", from, to, (char *) 0);
-- _exit (1);
--
-- default: /* Parent. */
-- while (wait (&status) != pid)
-- /* Do nothing. */ ;
--
-- if (status)
-- {
-- /* MVDIR failed. */
-- errno = EIO;
-- return -1;
-- }
-- }
-- }
-- else
--
--#endif /* MVDIR */
--
-- {
-- if (link (from, to))
-- return -1;
-- if (unlink (from) && errno != ENOENT)
-- {
-- unlink (to);
-- return -1;
-- }
-- }
-- return 0;
--}
-diff -urNd -urNd patch-2.5.4/stdbool.h.in patch-2.5.9/stdbool.h.in
---- patch-2.5.4/stdbool.h.in 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/stdbool.h.in 2003-01-09 08:35:14.000000000 -0500
-@@ -0,0 +1,47 @@
-+/* Copyright (C) 2001-2002 Free Software Foundation, Inc.
-+ Written by Bruno Haible <haible at clisp.cons.org>, 2001.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software Foundation,
-+ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+#ifndef _STDBOOL_H
-+#define _STDBOOL_H
-+
-+/* ISO C 99 <stdbool.h> for platforms that lack it. */
-+
-+/* 7.16. Boolean type and values */
-+
-+/* BeOS <sys/socket.h> already #defines false 0, true 1. We use the same
-+ definitions below, but temporarily we have to #undef them. */
-+#ifdef __BEOS__
-+# undef false
-+# undef true
-+#endif
-+
-+/* For the sake of symbolic names in gdb, define _Bool as an enum type. */
-+#ifndef __cplusplus
-+# if !@HAVE__BOOL@
-+typedef enum { false = 0, true = 1 } _Bool;
-+# endif
-+#else
-+typedef bool _Bool;
-+#endif
-+#define bool _Bool
-+
-+/* The other macros must be usable in preprocessor directives. */
-+#define false 0
-+#define true 1
-+#define __bool_true_false_are_defined 1
-+
-+#endif /* _STDBOOL_H */
-diff -urNd -urNd patch-2.5.4/strcasecmp.c patch-2.5.9/strcasecmp.c
---- patch-2.5.4/strcasecmp.c 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/strcasecmp.c 2000-08-07 11:48:18.000000000 -0400
-@@ -0,0 +1,66 @@
-+/* strcasecmp.c -- case insensitive string comparator
-+ Copyright (C) 1998, 1999 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software Foundation,
-+ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-+
-+#if HAVE_CONFIG_H
-+# include <config.h>
-+#endif
-+
-+#ifdef LENGTH_LIMIT
-+# define STRXCASECMP_FUNCTION strncasecmp
-+# define STRXCASECMP_DECLARE_N , size_t n
-+# define LENGTH_LIMIT_EXPR(Expr) Expr
-+#else
-+# define STRXCASECMP_FUNCTION strcasecmp
-+# define STRXCASECMP_DECLARE_N /* empty */
-+# define LENGTH_LIMIT_EXPR(Expr) 0
-+#endif
-+
-+#include <sys/types.h>
-+#include <ctype.h>
-+
-+#define TOLOWER(Ch) (isupper (Ch) ? tolower (Ch) : (Ch))
-+
-+/* Compare {{no more than N characters of }}strings S1 and S2,
-+ ignoring case, returning less than, equal to or
-+ greater than zero if S1 is lexicographically less
-+ than, equal to or greater than S2. */
-+
-+int
-+STRXCASECMP_FUNCTION (const char *s1, const char *s2 STRXCASECMP_DECLARE_N)
-+{
-+ register const unsigned char *p1 = (const unsigned char *) s1;
-+ register const unsigned char *p2 = (const unsigned char *) s2;
-+ unsigned char c1, c2;
-+
-+ if (p1 == p2 || LENGTH_LIMIT_EXPR (n == 0))
-+ return 0;
-+
-+ do
-+ {
-+ c1 = TOLOWER (*p1);
-+ c2 = TOLOWER (*p2);
-+
-+ if (LENGTH_LIMIT_EXPR (--n == 0) || c1 == '\0')
-+ break;
-+
-+ ++p1;
-+ ++p2;
-+ }
-+ while (c1 == c2);
-+
-+ return c1 - c2;
-+}
-diff -urNd -urNd patch-2.5.4/strncasecmp.c patch-2.5.9/strncasecmp.c
---- patch-2.5.4/strncasecmp.c 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/strncasecmp.c 1999-01-02 10:55:44.000000000 -0500
-@@ -0,0 +1,2 @@
-+#define LENGTH_LIMIT
-+#include "strcasecmp.c"
-diff -urNd -urNd patch-2.5.4/unlocked-io.h patch-2.5.9/unlocked-io.h
---- patch-2.5.4/unlocked-io.h 1969-12-31 19:00:00.000000000 -0500
-+++ patch-2.5.9/unlocked-io.h 2002-12-04 15:51:07.000000000 -0500
-@@ -0,0 +1,90 @@
-+/* Prefer faster, non-thread-safe stdio functions if available.
-+
-+ Copyright (C) 2001, 2002 Free Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify it
-+ under the terms of the GNU Library General Public License as published
-+ by the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Library General Public License for more details.
-+
-+ You should have received a copy of the GNU Library General Public
-+ License along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-+ USA. */
-+
-+/* Written by Jim Meyering. */
-+
-+#ifndef UNLOCKED_IO_H
-+# define UNLOCKED_IO_H 1
-+
-+# ifndef USE_UNLOCKED_IO
-+# define USE_UNLOCKED_IO 1
-+# endif
-+
-+# if USE_UNLOCKED_IO
-+
-+/* These are wrappers for functions/macros from GNU libc.
-+ The standard I/O functions are thread-safe. These *_unlocked ones are
-+ more efficient but not thread-safe. That they're not thread-safe is
-+ fine since all of the applications in this package are single threaded. */
-+
-+# if HAVE_DECL_CLEARERR_UNLOCKED
-+# undef clearerr
-+# define clearerr(x) clearerr_unlocked (x)
-+# endif
-+# if HAVE_DECL_FEOF_UNLOCKED
-+# undef feof
-+# define feof(x) feof_unlocked (x)
-+# endif
-+# if HAVE_DECL_FERROR_UNLOCKED
-+# undef ferror
-+# define ferror(x) ferror_unlocked (x)
-+# endif
-+# if HAVE_DECL_FFLUSH_UNLOCKED
-+# undef fflush
-+# define fflush(x) fflush_unlocked (x)
-+# endif
-+# if HAVE_DECL_FGETS_UNLOCKED
-+# undef fgets
-+# define fgets(x,y,z) fgets_unlocked (x,y,z)
-+# endif
-+# if HAVE_DECL_FPUTC_UNLOCKED
-+# undef fputc
-+# define fputc(x,y) fputc_unlocked (x,y)
-+# endif
-+# if HAVE_DECL_FPUTS_UNLOCKED
-+# undef fputs
-+# define fputs(x,y) fputs_unlocked (x,y)
-+# endif
-+# if HAVE_DECL_FREAD_UNLOCKED
-+# undef fread
-+# define fread(w,x,y,z) fread_unlocked (w,x,y,z)
-+# endif
-+# if HAVE_DECL_FWRITE_UNLOCKED
-+# undef fwrite
-+# define fwrite(w,x,y,z) fwrite_unlocked (w,x,y,z)
-+# endif
-+# if HAVE_DECL_GETC_UNLOCKED
-+# undef getc
-+# define getc(x) getc_unlocked (x)
-+# endif
-+# if HAVE_DECL_GETCHAR_UNLOCKED
-+# undef getchar
-+# define getchar() getchar_unlocked ()
-+# endif
-+# if HAVE_DECL_PUTC_UNLOCKED
-+# undef putc
-+# define putc(x,y) putc_unlocked (x,y)
-+# endif
-+# if HAVE_DECL_PUTCHAR_UNLOCKED
-+# undef putchar
-+# define putchar(x) putchar_unlocked (x)
-+# endif
-+
-+# endif /* USE_UNLOCKED_IO */
-+#endif /* UNLOCKED_IO_H */
-diff -urNd -urNd patch-2.5.4/util.c patch-2.5.9/util.c
---- patch-2.5.4/util.c 1999-08-30 02:20:08.000000000 -0400
-+++ patch-2.5.9/util.c 2003-05-20 10:04:53.000000000 -0400
-@@ -1,9 +1,11 @@
- /* utility functions for `patch' */
-
--/* $Id: util.c,v 1.27 1999/08/30 06:20:08 eggert Exp $ */
-+/* $Id: util.c,v 1.36 2003/05/20 14:04:53 eggert Exp $ */
-
--/* Copyright 1986 Larry Wall
-- Copyright 1992, 1993, 1997-1998, 1999 Free Software Foundation, Inc.
-+/* Copyright (C) 1986 Larry Wall
-+
-+ Copyright (C) 1992, 1993, 1997, 1998, 1999, 2001, 2002, 2003 Free
-+ Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -23,7 +25,7 @@
- #define XTERN extern
- #include <common.h>
- #include <backupfile.h>
--#include <basename.h>
-+#include <dirname.h>
- #include <quotearg.h>
- #include <quotesys.h>
- #include <version.h>
-@@ -43,23 +45,9 @@
- # define raise(sig) kill (getpid (), sig)
- #endif
-
--#ifdef __STDC__
--# include <stdarg.h>
--# define vararg_start va_start
--#else
--# define vararg_start(ap,p) va_start (ap)
--# if HAVE_VARARGS_H
--# include <varargs.h>
--# else
-- typedef char *va_list;
--# define va_dcl int va_alist;
--# define va_start(ap) ((ap) = (va_list) &va_alist)
--# define va_arg(ap, t) (((t *) ((ap) += sizeof (t))) [-1])
--# define va_end(ap)
--# endif
--#endif
-+#include <stdarg.h>
-
--static void makedirs PARAMS ((char *));
-+static void makedirs (char *);
-
- /* Move a file FROM (where *FROM_NEEDS_REMOVAL is nonzero if FROM
- needs removal when cleaning up at the end of execution)
-@@ -67,11 +55,11 @@
- If we must create TO, use MODE to create it.
- If FROM is null, remove TO (ignoring FROMSTAT).
- FROM_NEEDS_REMOVAL must be nonnull if FROM is nonnull.
-- Back up TO if BACKUP is nonzero. */
-+ Back up TO if BACKUP is true. */
-
- void
- move_file (char const *from, int volatile *from_needs_removal,
-- char *to, mode_t mode, int backup)
-+ char *to, mode_t mode, bool backup)
- {
- struct stat to_st;
- int to_errno = ! backup ? -1 : stat (to, &to_st) == 0 ? 0 : errno;
-@@ -152,11 +140,9 @@
- say ("Renaming file %s to %s\n",
- quotearg_n (0, from), quotearg_n (1, to));
-
-- if (rename (from, to) == 0)
-- *from_needs_removal = 0;
-- else
-+ if (rename (from, to) != 0)
- {
-- int to_dir_known_to_exist = 0;
-+ bool to_dir_known_to_exist = false;
-
- if (errno == ENOENT
- && (to_errno == -1 || to_errno == ENOENT))
-@@ -164,10 +150,7 @@
- makedirs (to);
- to_dir_known_to_exist = 1;
- if (rename (from, to) == 0)
-- {
-- *from_needs_removal = 0;
-- return;
-- }
-+ goto rename_succeeded;
- }
-
- if (errno == EXDEV)
-@@ -175,7 +158,7 @@
- if (! backup)
- {
- if (unlink (to) == 0)
-- to_dir_known_to_exist = 1;
-+ to_dir_known_to_exist = true;
- else if (errno != ENOENT)
- pfatal ("Can't remove file %s", quotearg (to));
- }
-@@ -188,6 +171,14 @@
- pfatal ("Can't rename file %s to %s",
- quotearg_n (0, from), quotearg_n (1, to));
- }
-+
-+ rename_succeeded:
-+ /* Do not clear *FROM_NEEDS_REMOVAL if it's possible that the
-+ rename returned zero because FROM and TO are hard links to
-+ the same file. */
-+ if (0 < to_errno
-+ || (to_errno == 0 && to_st.st_nlink <= 1))
-+ *from_needs_removal = 0;
- }
- else if (! backup)
- {
-@@ -255,23 +246,27 @@
-
- static char const CLEARTOOL_CO[] = "cleartool co -unr -nc ";
-
-+static char const PERFORCE_CO[] = "p4 edit ";
-+
- /* Return "RCS" if FILENAME is controlled by RCS,
- "SCCS" if it is controlled by SCCS,
-- "ClearCase" if it is controlled by Clearcase, and 0 otherwise.
-- READONLY is nonzero if we desire only readonly access to FILENAME.
-+ "ClearCase" if it is controlled by Clearcase,
-+ "Perforce" if it is controlled by Perforce,
-+ and 0 otherwise.
-+ READONLY is true if we desire only readonly access to FILENAME.
- FILESTAT describes FILENAME's status or is 0 if FILENAME does not exist.
- If successful and if GETBUF is nonzero, set *GETBUF to a command
- that gets the file; similarly for DIFFBUF and a command to diff the file
- (but set *DIFFBUF to 0 if the diff operation is meaningless).
- *GETBUF and *DIFFBUF must be freed by the caller. */
- char const *
--version_controller (char const *filename, int readonly,
-+version_controller (char const *filename, bool readonly,
- struct stat const *filestat, char **getbuf, char **diffbuf)
- {
- struct stat cstat;
- char const *filebase = base_name (filename);
- char const *dotslash = *filename == '-' ? "./" : "";
-- size_t dir_len = filebase - filename;
-+ size_t dirlen = filebase - filename;
- size_t filenamelen = strlen (filename);
- size_t maxfixlen = sizeof "SCCS/" - 1 + sizeof SCCSPREFIX - 1;
- size_t maxtrysize = filenamelen + maxfixlen + 1;
-@@ -285,8 +280,8 @@
-
- strcpy (trybuf, filename);
-
--#define try1(f,a1) (sprintf (trybuf + dir_len, f, a1), stat (trybuf, &cstat) == 0)
--#define try2(f,a1,a2) (sprintf (trybuf + dir_len, f, a1,a2), stat (trybuf, &cstat) == 0)
-+#define try1(f,a1) (sprintf (trybuf + dirlen, f, a1), stat (trybuf, &cstat) == 0)
-+#define try2(f,a1,a2) (sprintf (trybuf + dirlen, f, a1,a2), stat (trybuf, &cstat) == 0)
-
- /* Check that RCS file is not working file.
- Some hosts don't report file name length errors. */
-@@ -362,6 +357,23 @@
- *diffbuf = 0;
-
- r = "ClearCase";
-+ }
-+ else if (!readonly && filestat &&
-+ (getenv("P4PORT") || getenv("P4USER") || getenv("P4CONFIG")))
-+ {
-+ if (getbuf)
-+ {
-+ char *p = *getbuf = xmalloc (maxgetsize);
-+ strcpy (p, PERFORCE_CO);
-+ p += sizeof PERFORCE_CO - 1;
-+ p += quote_system_arg (p, filename);
-+ *p = '\0';
-+ }
-+
-+ if (diffbuf)
-+ *diffbuf = 0;
-+
-+ r = "Perforce";
- }
-
- free (trybuf);
-@@ -369,12 +381,12 @@
- }
-
- /* Get FILENAME from version control system CS. The file already exists if
-- EXISTS is nonzero. Only readonly access is needed if READONLY is nonzero.
-+ EXISTS. Only readonly access is needed if READONLY.
- Use the command GETBUF to actually get the named file.
- Store the resulting file status into *FILESTAT.
-- Return nonzero if successful. */
--int
--version_get (char const *filename, char const *cs, int exists, int readonly,
-+ Return true if successful. */
-+bool
-+version_get (char const *filename, char const *cs, bool exists, bool readonly,
- char const *getbuf, struct stat *filestat)
- {
- if (patch_get < 0)
-@@ -460,7 +472,7 @@
- *--p = '0' + (int) (n % 10);
- while ((n /= 10) != 0);
- }
--
-+
- return p;
- }
-
-@@ -490,7 +502,7 @@
- {
- va_list args;
- fprintf (stderr, "%s: **** ", program_name);
-- vararg_start (args, format);
-+ va_start (args, format);
- vfprintf (stderr, format, args);
- va_end (args);
- putc ('\n', stderr);
-@@ -524,7 +536,7 @@
- int errnum = errno;
- va_list args;
- fprintf (stderr, "%s: **** ", program_name);
-- vararg_start (args, format);
-+ va_start (args, format);
- vfprintf (stderr, format, args);
- va_end (args);
- fflush (stderr); /* perror bypasses stdio on some hosts. */
-@@ -540,7 +552,7 @@
- say (char const *format, ...)
- {
- va_list args;
-- vararg_start (args, format);
-+ va_start (args, format);
- vfprintf (stdout, format, args);
- va_end (args);
- fflush (stdout);
-@@ -555,7 +567,7 @@
- int r;
- va_list args;
-
-- vararg_start (args, format);
-+ va_start (args, format);
- vfprintf (stdout, format, args);
- va_end (args);
- fflush (stdout);
-@@ -566,7 +578,8 @@
- since it's unlikely that stdout will be seen by the tty user.
- The isatty test also works around a bug in GNU Emacs 19.34 under Linux
- which makes a call-process `patch' hang when it reads from /dev/tty.
-- POSIX.2 requires that we read /dev/tty, though. */
-+ POSIX.1-2001 XCU line 26599 requires that we read /dev/tty,
-+ though. */
- ttyfd = (posixly_correct || isatty (STDOUT_FILENO)
- ? open (TTY_DEVICE, O_RDONLY)
- : -1);
-@@ -607,15 +620,15 @@
-
- /* Return nonzero if it OK to reverse a patch. */
-
--int
-+bool
- ok_to_reverse (char const *format, ...)
- {
-- int r = 0;
-+ bool r = false;
-
- if (noreverse || ! (force && verbosity == SILENT))
- {
- va_list args;
-- vararg_start (args, format);
-+ va_start (args, format);
- vfprintf (stdout, format, args);
- va_end (args);
- }
-@@ -623,19 +636,17 @@
- if (noreverse)
- {
- printf (" Skipping patch.\n");
-- skip_rest_of_patch = TRUE;
-- r = 0;
-+ skip_rest_of_patch = true;
- }
- else if (force)
- {
- if (verbosity != SILENT)
- printf (" Applying it anyway.\n");
-- r = 0;
- }
- else if (batch)
- {
- say (reverse ? " Ignoring -R.\n" : " Assuming -R.\n");
-- r = 1;
-+ r = true;
- }
- else
- {
-@@ -648,7 +659,7 @@
- {
- if (verbosity != SILENT)
- say ("Skipping patch.\n");
-- skip_rest_of_patch = TRUE;
-+ skip_rest_of_patch = true;
- }
- }
- }
-@@ -711,7 +722,7 @@
- static sigset_t signals_to_block;
-
- #if ! HAVE_SIGACTION
--static RETSIGTYPE fatal_exit_handler PARAMS ((int)) __attribute__ ((noreturn));
-+static RETSIGTYPE fatal_exit_handler (int) __attribute__ ((noreturn));
- static RETSIGTYPE
- fatal_exit_handler (int sig)
- {
-@@ -721,7 +732,7 @@
- #endif
-
- void
--set_signals (int reset)
-+set_signals (bool reset)
- {
- int i;
- #if HAVE_SIGACTION
-@@ -743,7 +754,7 @@
- sigemptyset (&signals_to_block);
- for (i = 0; i < NUM_SIGS; i++)
- {
-- int ignoring_signal;
-+ bool ignoring_signal;
- #if HAVE_SIGACTION
- if (sigaction (sigs[i], (struct sigaction *) 0, &initial_act) != 0)
- continue;
-@@ -939,7 +950,13 @@
- }
- else if (ISSPACE ((unsigned char) *t))
- {
-+ /* Allow file names with internal spaces,
-+ but only if a tab separates the file name from the date. */
- char const *u = t;
-+ while (*u != '\t' && ISSPACE ((unsigned char) u[1]))
-+ u++;
-+ if (*u != '\t' && strchr (u + 1, '\t'))
-+ continue;
-
- if (set_time | set_utc)
- stamp = str2time (&u, initial_time,
-diff -urNd -urNd patch-2.5.4/util.h patch-2.5.9/util.h
---- patch-2.5.4/util.h 1999-08-30 02:20:08.000000000 -0400
-+++ patch-2.5.9/util.h 2003-05-20 09:56:48.000000000 -0400
-@@ -1,6 +1,26 @@
- /* utility functions for `patch' */
-
--/* $Id: util.h,v 1.17 1999/08/30 06:20:08 eggert Exp $ */
-+/* $Id: util.h,v 1.20 2003/05/20 13:56:48 eggert Exp $ */
-+
-+/* Copyright (C) 1986 Larry Wall
-+
-+ Copyright (C) 1992, 1993, 1997, 1998, 1999, 2001, 2002, 2003 Free
-+ Software Foundation, Inc.
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2, or (at your option)
-+ any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; see the file COPYING.
-+ If not, write to the Free Software Foundation,
-+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
- /* An upper bound on the print length of a signed decimal line number.
- Add one for the sign. */
-@@ -8,32 +28,32 @@
-
- XTERN enum backup_type backup_type;
-
--int ok_to_reverse PARAMS ((char const *, ...)) __attribute__ ((format (printf, 1, 2)));
--void ask PARAMS ((char const *, ...)) __attribute__ ((format (printf, 1, 2)));
--void say PARAMS ((char const *, ...)) __attribute__ ((format (printf, 1, 2)));
-+bool ok_to_reverse (char const *, ...) __attribute__ ((format (printf, 1, 2)));
-+void ask (char const *, ...) __attribute__ ((format (printf, 1, 2)));
-+void say (char const *, ...) __attribute__ ((format (printf, 1, 2)));
-
--void fatal PARAMS ((char const *, ...))
-+void fatal (char const *, ...)
- __attribute__ ((noreturn, format (printf, 1, 2)));
--void pfatal PARAMS ((char const *, ...))
-+void pfatal (char const *, ...)
- __attribute__ ((noreturn, format (printf, 1, 2)));
-
--char *fetchname PARAMS ((char *, int, time_t *));
--char *savebuf PARAMS ((char const *, size_t));
--char *savestr PARAMS ((char const *));
--char const *version_controller PARAMS ((char const *, int, struct stat const *, char **, char **));
--int version_get PARAMS ((char const *, char const *, int, int, char const *, struct stat *));
--int create_file PARAMS ((char const *, int, mode_t));
--int systemic PARAMS ((char const *));
--char *format_linenum PARAMS ((char[LINENUM_LENGTH_BOUND + 1], LINENUM));
--void Fseek PARAMS ((FILE *, file_offset, int));
--void copy_file PARAMS ((char const *, char const *, int, mode_t));
--void exit_with_signal PARAMS ((int)) __attribute__ ((noreturn));
--void ignore_signals PARAMS ((void));
--void init_time PARAMS ((void));
--void memory_fatal PARAMS ((void)) __attribute__ ((noreturn));
--void move_file PARAMS ((char const *, int volatile *, char *, mode_t, int));
--void read_fatal PARAMS ((void)) __attribute__ ((noreturn));
--void remove_prefix PARAMS ((char *, size_t));
--void removedirs PARAMS ((char *));
--void set_signals PARAMS ((int));
--void write_fatal PARAMS ((void)) __attribute__ ((noreturn));
-+char *fetchname (char *, int, time_t *);
-+char *savebuf (char const *, size_t);
-+char *savestr (char const *);
-+char const *version_controller (char const *, bool, struct stat const *, char **, char **);
-+bool version_get (char const *, char const *, bool, bool, char const *, struct stat *);
-+int create_file (char const *, int, mode_t);
-+int systemic (char const *);
-+char *format_linenum (char[LINENUM_LENGTH_BOUND + 1], LINENUM);
-+void Fseek (FILE *, file_offset, int);
-+void copy_file (char const *, char const *, int, mode_t);
-+void exit_with_signal (int) __attribute__ ((noreturn));
-+void ignore_signals (void);
-+void init_time (void);
-+void memory_fatal (void) __attribute__ ((noreturn));
-+void move_file (char const *, int volatile *, char *, mode_t, bool);
-+void read_fatal (void) __attribute__ ((noreturn));
-+void remove_prefix (char *, size_t);
-+void removedirs (char *);
-+void set_signals (bool);
-+void write_fatal (void) __attribute__ ((noreturn));
-diff -urNd -urNd patch-2.5.4/version.c patch-2.5.9/version.c
---- patch-2.5.4/version.c 1999-08-30 02:20:08.000000000 -0400
-+++ patch-2.5.9/version.c 2003-05-18 04:25:17.000000000 -0400
-@@ -1,17 +1,16 @@
- /* Print the version number. */
-
--/* $Id: version.c,v 1.7 1999/08/30 06:20:08 eggert Exp $ */
-+/* $Id: version.c,v 1.13 2003/05/18 08:25:17 eggert Exp $ */
-
- #define XTERN extern
- #include <common.h>
- #undef XTERN
- #define XTERN
--#include <patchlevel.h>
- #include <version.h>
-
- static char const copyright_string[] = "\
--Copyright 1984-1988 Larry Wall\n\
--Copyright 1989-1999 Free Software Foundation, Inc.";
-+Copyright (C) 1988 Larry Wall\n\
-+Copyright (C) 2003 Free Software Foundation, Inc.";
-
- static char const free_software_msgid[] = "\
- This program comes with NO WARRANTY, to the extent permitted by law.\n\
-@@ -25,6 +24,6 @@
- void
- version (void)
- {
-- printf ("%s %s\n%s\n\n%s\n\n%s\n", program_name, PATCH_VERSION,
-+ printf ("%s %s\n%s\n\n%s\n\n%s\n", PACKAGE_NAME, PACKAGE_VERSION,
- copyright_string, free_software_msgid, authorship_msgid);
- }
-diff -urNd -urNd patch-2.5.4/version.h patch-2.5.9/version.h
---- patch-2.5.4/version.h 1997-04-06 21:07:00.000000000 -0400
-+++ patch-2.5.9/version.h 2002-05-28 03:24:05.000000000 -0400
-@@ -1,5 +1,5 @@
- /* Print the version number. */
-
--/* $Id: version.h,v 1.3 1997/04/07 01:07:00 eggert Exp $ */
-+/* $Id: version.h,v 1.5 2002/05/28 07:24:05 eggert Exp $ */
-
--void version PARAMS ((void));
-+void version (void);
-diff -urNd -urNd patch-2.5.4/xalloc.h patch-2.5.9/xalloc.h
---- patch-2.5.4/xalloc.h 1999-01-01 12:36:43.000000000 -0500
-+++ patch-2.5.9/xalloc.h 2000-10-31 02:09:56.000000000 -0500
-@@ -1,5 +1,5 @@
- /* xalloc.h -- malloc with out-of-memory checking
-- Copyright (C) 1990-1998, 1999 Free Software Foundation, Inc.
-+ Copyright (C) 1990-1998, 1999, 2000 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -26,6 +26,16 @@
- # endif
- # endif
-
-+# ifndef __attribute__
-+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) || __STRICT_ANSI__
-+# define __attribute__(x)
-+# endif
-+# endif
-+
-+# ifndef ATTRIBUTE_NORETURN
-+# define ATTRIBUTE_NORETURN __attribute__ ((__noreturn__))
-+# endif
-+
- /* Exit value when the requested amount of memory is not available.
- It is initialized to EXIT_FAILURE, but the caller may set it to
- some other value. */
-@@ -33,20 +43,45 @@
-
- /* If this pointer is non-zero, run the specified function upon each
- allocation failure. It is initialized to zero. */
--extern void (*xalloc_fail_func) ();
-+extern void (*xalloc_fail_func) PARAMS ((void));
-
- /* If XALLOC_FAIL_FUNC is undefined or a function that returns, this
-- message must be non-NULL. It is translated via gettext.
-- The default value is "Memory exhausted". */
--extern char *const xalloc_msg_memory_exhausted;
-+ message is output. It is translated via gettext.
-+ Its value is "memory exhausted". */
-+extern char const xalloc_msg_memory_exhausted[];
-+
-+/* This function is always triggered when memory is exhausted. It is
-+ in charge of honoring the three previous items. This is the
-+ function to call when one wants the program to die because of a
-+ memory allocation failure. */
-+extern void xalloc_die PARAMS ((void)) ATTRIBUTE_NORETURN;
-
- void *xmalloc PARAMS ((size_t n));
- void *xcalloc PARAMS ((size_t n, size_t s));
- void *xrealloc PARAMS ((void *p, size_t n));
-+char *xstrdup PARAMS ((const char *str));
-+
-+# define XMALLOC(Type, N_items) ((Type *) xmalloc (sizeof (Type) * (N_items)))
-+# define XCALLOC(Type, N_items) ((Type *) xcalloc (sizeof (Type), (N_items)))
-+# define XREALLOC(Ptr, Type, N_items) \
-+ ((Type *) xrealloc ((void *) (Ptr), sizeof (Type) * (N_items)))
-+
-+/* Declare and alloc memory for VAR of type TYPE. */
-+# define NEW(Type, Var) Type *(Var) = XMALLOC (Type, 1)
-+
-+/* Free VAR only if non NULL. */
-+# define XFREE(Var) \
-+ do { \
-+ if (Var) \
-+ free (Var); \
-+ } while (0)
-+
-+/* Return a pointer to a malloc'ed copy of the array SRC of NUM elements. */
-+# define CCLONE(Src, Num) \
-+ (memcpy (xmalloc (sizeof (*Src) * (Num)), (Src), sizeof (*Src) * (Num)))
-+
-+/* Return a malloc'ed copy of SRC. */
-+# define CLONE(Src) CCLONE (Src, 1)
-
--# define XMALLOC(Type, N_bytes) ((Type *) xmalloc (sizeof (Type) * (N_bytes)))
--# define XCALLOC(Type, N_bytes) ((Type *) xcalloc (sizeof (Type), (N_bytes)))
--# define XREALLOC(Ptr, Type, N_bytes) \
-- ((Type *) xrealloc ((void *) (Ptr), sizeof (Type) * (N_bytes)))
-
- #endif /* !XALLOC_H_ */
-diff -urNd -urNd patch-2.5.4/xmalloc.c patch-2.5.9/xmalloc.c
---- patch-2.5.4/xmalloc.c 1999-04-18 22:43:16.000000000 -0400
-+++ patch-2.5.9/xmalloc.c 2002-11-21 14:16:29.000000000 -0500
-@@ -1,5 +1,5 @@
- /* xmalloc.c -- malloc with out of memory checking
-- Copyright (C) 1990-1997, 98, 99 Free Software Foundation, Inc.
-+ Copyright (C) 1990-1999, 2000, 2002 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
-@@ -30,14 +30,9 @@
- void free ();
- #endif
-
--#if ENABLE_NLS
--# include <libintl.h>
--# define _(Text) gettext (Text)
--#else
--# define textdomain(Domain)
--# define _(Text) Text
--#endif
--#define N_(Text) Text
-+#include "gettext.h"
-+#define _(msgid) gettext (msgid)
-+#define N_(msgid) msgid
-
- #include "error.h"
- #include "xalloc.h"
-@@ -46,12 +41,14 @@
- # define EXIT_FAILURE 1
- #endif
-
--#ifndef HAVE_DONE_WORKING_MALLOC_CHECK
--you must run the autoconf test for a properly working malloc -- see malloc.m4
-+/* The following tests require AC_PREREQ(2.54). */
-+
-+#ifndef HAVE_MALLOC
-+"you must run the autoconf test for a GNU libc compatible malloc"
- #endif
-
--#ifndef HAVE_DONE_WORKING_REALLOC_CHECK
--you must run the autoconf test for a properly working realloc -- see realloc.m4
-+#ifndef HAVE_REALLOC
-+"you must run the autoconf test for a GNU libc compatible realloc"
- #endif
-
- /* Exit value when the requested amount of memory is not available.
-@@ -59,18 +56,22 @@
- int xalloc_exit_failure = EXIT_FAILURE;
-
- /* If non NULL, call this function when memory is exhausted. */
--void (*xalloc_fail_func) () = 0;
-+void (*xalloc_fail_func) PARAMS ((void)) = 0;
-
- /* If XALLOC_FAIL_FUNC is NULL, or does return, display this message
- before exiting when memory is exhausted. Goes through gettext. */
--char *const xalloc_msg_memory_exhausted = N_("Memory exhausted");
-+char const xalloc_msg_memory_exhausted[] = N_("memory exhausted");
-
--static void
--xalloc_fail (void)
-+void
-+xalloc_die (void)
- {
- if (xalloc_fail_func)
- (*xalloc_fail_func) ();
- error (xalloc_exit_failure, 0, "%s", _(xalloc_msg_memory_exhausted));
-+ /* The `noreturn' cannot be given to error, since it may return if
-+ its first argument is 0. To help compilers understand the
-+ xalloc_die does terminate, call exit. */
-+ exit (EXIT_FAILURE);
- }
-
- /* Allocate N bytes of memory dynamically, with error checking. */
-@@ -82,20 +83,19 @@
-
- p = malloc (n);
- if (p == 0)
-- xalloc_fail ();
-+ xalloc_die ();
- return p;
- }
-
- /* Change the size of an allocated block of memory P to N bytes,
-- with error checking.
-- If P is NULL, run xmalloc. */
-+ with error checking. */
-
- void *
- xrealloc (void *p, size_t n)
- {
- p = realloc (p, n);
- if (p == 0)
-- xalloc_fail ();
-+ xalloc_die ();
- return p;
- }
-
-@@ -108,6 +108,6 @@
-
- p = calloc (n, s);
- if (p == 0)
-- xalloc_fail ();
-+ xalloc_die ();
- return p;
- }
diff --git a/meta/recipes-devtools/patch/patch.inc b/meta/recipes-devtools/patch/patch.inc
index 4ce5170..d9769d0 100644
--- a/meta/recipes-devtools/patch/patch.inc
+++ b/meta/recipes-devtools/patch/patch.inc
@@ -1,7 +1,6 @@
DESCRIPTION = "patch takes a patch file containing a difference listing \
produced by the diff program and applies those differences to one or more \
original files, producing patched versions."
-LICENSE = "GPL"
PRIORITY = "standard"
SECTION = "utils"
diff --git a/meta/recipes-devtools/patch/patch-2.5.9/debian.patch b/meta/recipes-devtools/patch/patch/debian.patch
similarity index 100%
rename from meta/recipes-devtools/patch/patch-2.5.9/debian.patch
rename to meta/recipes-devtools/patch/patch/debian.patch
diff --git a/meta/recipes-devtools/patch/patch-2.5.9/global-reject-file.diff b/meta/recipes-devtools/patch/patch/global-reject-file.diff
similarity index 100%
rename from meta/recipes-devtools/patch/patch-2.5.9/global-reject-file.diff
rename to meta/recipes-devtools/patch/patch/global-reject-file.diff
diff --git a/meta/recipes-devtools/patch/patch-2.5.9/install.patch b/meta/recipes-devtools/patch/patch/install.patch
similarity index 100%
rename from meta/recipes-devtools/patch/patch-2.5.9/install.patch
rename to meta/recipes-devtools/patch/patch/install.patch
diff --git a/meta/recipes-devtools/patch/patch-2.5.9/unified-reject-files.diff b/meta/recipes-devtools/patch/patch/unified-reject-files.diff
similarity index 100%
rename from meta/recipes-devtools/patch/patch-2.5.9/unified-reject-files.diff
rename to meta/recipes-devtools/patch/patch/unified-reject-files.diff
diff --git a/meta/recipes-devtools/patch/patch_2.5.9.bb b/meta/recipes-devtools/patch/patch_2.5.9.bb
index 4b4511f..285b42a 100644
--- a/meta/recipes-devtools/patch/patch_2.5.9.bb
+++ b/meta/recipes-devtools/patch/patch_2.5.9.bb
@@ -1,13 +1,12 @@
require patch.inc
+LICENSE = "GPLv2"
-SRC_URI = "${GNU_MIRROR}/patch/patch-2.5.4.tar.gz \
- file://2.5.9.patch;patch=1 \
- file://debian.patch;patch=1 \
+SRC_URI += " file://debian.patch;patch=1 \
file://install.patch;patch=1 \
file://unified-reject-files.diff;patch=1 \
file://global-reject-file.diff;patch=1 "
+PR = "r2"
-SRC_URI[md5sum] = "ee5ae84d115f051d87fcaaef3b4ae782"
-SRC_URI[sha256sum] = "dd2fc5a745bfca5450d13d7032fdc47ab102514aae3efb3fe334a6eff87df799"
-S = "${WORKDIR}/patch-2.5.4"
-PR = "r2"
\ No newline at end of file
+LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
+SRC_URI[md5sum] = "dacfb618082f8d3a2194601193cf8716"
+SRC_URI[sha256sum] = "ecb5c6469d732bcf01d6ec1afe9e64f1668caba5bfdb103c28d7f537ba3cdb8a"
--
1.7.2.2
More information about the poky
mailing list