[meta-xilinx] u-boot fpga command silently fails on zcu102 SD boot

[Luca Ceresoli]

Hi Manjukumar,

On 24/04/19 18:26, Manjukumar Harthikote Matha wrote:
> 
> 
>> -----Original Message-----
>> From: Luca Ceresoli [mailto:luca at lucaceresoli.net]
>> Sent: Wednesday, April 24, 2019 8:53 AM
>> To: Monaghan, Michael L. (GSFC-5870) <michael.l.monaghan at nasa.gov>;
>> meta-xilinx at yoctoproject.org
>> Cc: Andreas Galauner <andreas at galauner.de>; Manjukumar Harthikote Matha
>> <MANJUKUM at xilinx.com>; Mounika Akula <makula at xlnx.xilinx.com>
>> Subject: Re: [meta-xilinx] u-boot fpga command silently fails on zcu102 SD boot
>>
>> Hi Michael,
>>
>> On 24/04/19 01:51, Monaghan, Michael L. (GSFC-5870) wrote:
>>> Hello all,
>>>
>>> When booting from SD on the zcu102, the u-boot `fpga` command appears
>> silently fails to configure the PL. The done led does not illuminate and the
>> command returns 1.
>>
>> PMUFW version? 2018.3?
>>
>> Since 2018.3, the build instructions for pmu firmware are broken. The
>> copy_bsp.sh script does not copy the FPGA loading files, which results is a
>> successful build of a PMUFW *without* the FPGA loading feature.
>>
>> Andreas reported the problem and sent a patch to fix it:
>> https://lists.yoctoproject.org/pipermail/meta-xilinx/2019-January/004184.html
>>
>> The patch is in meta-xilinx master, but has not been backported to thud, so you
>> should try that.
>>
> 
> I have backported to thud 

Thanks, tested and working here.

>> Manjukumar, Mounika, this issue is still hurting people. I'd like to renew my
>> appeal to really fix it:https://lists.yoctoproject.org/pipermail/meta-xilinx/2019-
>> January/004190.html
>>
> 
> Will follow up and keep you posted

Thanks, I appreciate that.

-- 
Luca