[meta-xilinx] uboot CONFIG_SYS_SDRAM_SIZE allocation error
Mike Looijmans
mike.looijmans at topic.nl
Thu Dec 1 00:16:39 PST 2016
The RAM config in current u-boot is taken from the devicetree. Modify the
"memory" node.
You should make a "reserved" RAM region instead of reducing the size.
On 01-12-16 08:39, Arno Steffens wrote:
> I switched from an older yocto u-boot (2015.01) to recent one (2016.01). Now I can't boot anymore:
>
> Zynq> boot
> QSPI: Kernel/Devicetree - NFS: rootfs
> SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB
> device 0 offset 0x4b0000, size 0x10000
> SF: 65536 bytes @ 0x4b0000 Read: OK
> device 0 offset 0x4c0000, size 0x380000
> SF: 3670016 bytes @ 0x4c0000 Read: OK
> ## Booting kernel from Legacy Image at 02080000 ...
> Image Name: Linux-4.4.0-xilinx
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 3513736 Bytes = 3.4 MiB
> Load Address: 00008000
> Entry Point: 00008000
> Verifying Checksum ... OK
> ## Flattened Device Tree blob at 02000000
> Booting using the fdt blob at 0x2000000
> Loading Kernel Image ... OK
> ERROR: Failed to allocate 0x82a5 bytes below 0x0.
> device tree - allocation error
> FDT creation failed! hanging...### ERROR ### Please RESET the board ###
>
> --------
> My guess for reason of that is following, but I can't solve it.
>
> My board (based on MicroZed) has 512MB Ram, but 16MB are used for FPGA.
>
> I managed that before with
> #ifndef __CONFIG_ZYNQ_MICROZED_H
> #define __CONFIG_ZYNQ_MICROZED_H
>
> -#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024)
> +#define CONFIG_SYS_SDRAM_SIZE (496 * 1024 * 1024)
>
> In newer Uboot I can't find this definition not in that way. Nevertheless I added this line.
> (If not, that my last message is "Starting kernel ...")
>
> Although digging around, I couldn't find how nowadays this is handled. This seems memory size is not board-specific anymore. How it is handled?
>
> Thanks
>
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: mike.looijmans at topicproducts.com
Website: www.topicproducts.com
Please consider the environment before printing this e-mail
More information about the meta-xilinx
mailing list