[meta-xilinx] Problem with generating uImage via meta-xilinx
avallash
avallash at o2.pl
Fri Jul 10 03:26:07 PDT 2015
Hi,
I am trying to run linux on zc706 xilinx dev board and I get this error
while u-boot tries to boot uImage:
Board: Xilinx Zynq
I2C: ready
DRAM: ECC disabled 1 GiB
MMC: zynq_sdhci: 0
SF: Detected S25FL128S_64K with page size 512 Bytes, erase size 128 KiB,
total 32 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Board: Xilinx Zynq
Net: Gem.e000b000
Hit any key to stop autoboot: 0
Copying Linux from QSPI flash to RAM...
SF: Detected S25FL128S_64K with page size 512 Bytes, erase size 128 KiB,
total 32 MiB
SF: 5242880 bytes @ 0x100000 Read: OK
SF: 131072 bytes @ 0x600000 Read: OK
Copying ramdisk...
SF: 6160384 bytes @ 0x620000 Read: OK
Wrong Image Format for bootm command
ERROR: can't get kernel image!
zynq-uboot> <INTERRUPT>
zynq-uboot>
I am using fsbl from petalinux, u-boot from meta-xilinx (u-boot-xlnx) and
building core-image-minimal and core-image-minimal-initramfs
yocto version poky-dizzy-12.0.2
I think uImage header is correct:
00000000 27 05 19 56 AA D0 FC AC 55 9B EB 70 00 30 46 E8
'..V....U..p.0F.
00000010 00 00 80 00 00 00 80 00 92 CC BB 0D 05 02 02 00
................
00000020 4C 69 6E 75 78 2D 33 2E 31 34 2E 32 2D 78 69 6C
Linux-3.14.2-xil
00000030 69 6E 78 00 00 00 00 00 00 00 00 00 00 00 00 00
inx.............
What am I missing? Can someone point me to materials that can help me fix
this issue? Was this problem addressed in the past?
printenv:
zynq-uboot> printenv
baudrate=115200
bitstream_image=system.bit.bin
boot_image=BOOT.bin
boot_size=0xF00000
bootcmd=run $modeboot
bootdelay=3
bootenv=uEnv.txt
devicetree_image=devicetree.dtb
devicetree_load_address=0x2000000
devicetree_size=0x20000
dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0
dfu_mmc_info=set dfu_alt_info ${kernel_image} fat 0 1\\;${devicetree_image}
fat 0 1\\;${ramdisk_image} fat 0 1
dfu_ram=run dfu_ram_info && dfu 0 ram 0
dfu_ram_info=set dfu_alt_info ${kernel_image} ram 0x3000000
0x500000\\;${devicetree_image} ram 0x2A00000 0x20000\\;${ramdisk_image} ram
0x2000000 0x600000
ethact=Gem.e000b000
ethaddr=00:0a:35:00:01:22
fdt_high=0x20000000
importbootenv=echo Importing environment from SD ...; env import -t
${loadbootenv_addr} $filesize
initrd_high=0x20000000
ipaddr=10.10.70.102
jtagboot=echo TFTPing Linux to RAM... && tftpboot ${kernel_load_address}
${kernel_image} && tftpboot ${devicetree_load_address} ${devicetree_image}
&& tftpboot ${ramdisk_load_address} ${ramdisk_image} && bootm
${kernel_load_addres
s} ${ramdisk_load_address} ${devicetree_load_address}
kernel_image=uImage
kernel_load_address=0x2080000
kernel_size=0x500000
loadbit_addr=0x100000
loadbootenv=load mmc 0 ${loadbootenv_addr} ${bootenv}
loadbootenv_addr=0x2000000
mmc_loadbit=echo Loading bitstream from SD/MMC/eMMC to RAM.. && mmcinfo &&
load mmc 0 ${loadbit_addr} ${bitstream_image} && fpga load 0
${loadbit_addr} ${filesize}
modeboot=qspiboot
nandboot=echo Copying Linux from NAND flash to RAM... && nand read
${kernel_load_address} 0x100000 ${kernel_size} && nand read
${devicetree_load_address} 0x600000 ${devicetree_size} && echo Copying
ramdisk... && nand read ${ramdis
k_load_address} 0x620000 ${ramdisk_size} && bootm ${kernel_load_address}
${ramdisk_load_address} ${devicetree_load_address}
norboot=echo Copying Linux from NOR flash to RAM... && cp.b 0xE2100000
${kernel_load_address} ${kernel_size} && cp.b 0xE2600000
${devicetree_load_address} ${devicetree_size} && echo Copying ramdisk... &&
cp.b 0xE2620000 ${ramdisk_
load_address} ${ramdisk_size} && bootm ${kernel_load_address}
${ramdisk_load_address} ${devicetree_load_address}
preboot=if test $modeboot = sdboot && env run sd_uEnvtxt_existence_test;
then if env run loadbootenv; then env run importbootenv; fi; fi;
qspiboot=echo Copying Linux from QSPI flash to RAM... && sf probe 0 0 0 &&
sf read ${kernel_load_address} 0x100000 ${kernel_size} && sf read
${devicetree_load_address} 0x600000 ${devicetree_size} && echo Copying
ramdisk... && sf r
ead ${ramdisk_load_address} 0x620000 ${ramdisk_size} && bootm
${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}
ramdisk_image=uramdisk.image.gz
ramdisk_load_address=0x4000000
ramdisk_size=0x5E0000
rsa_jtagboot=echo TFTPing Image to RAM... && tftpboot 0x100000
${boot_image} && zynqrsa 0x100000 && bootm ${kernel_load_address}
${ramdisk_load_address} ${devicetree_load_address}
rsa_nandboot=echo Copying Image from NAND flash to RAM... && nand read
0x100000 0x0 ${boot_size} && zynqrsa 0x100000 && bootm
${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}
rsa_norboot=echo Copying Image from NOR flash to RAM... && cp.b 0xE2100000
0x100000 ${boot_size} && zynqrsa 0x100000 && bootm ${kernel_load_address}
${ramdisk_load_address} ${devicetree_load_address}
rsa_qspiboot=echo Copying Image from QSPI flash to RAM... && sf probe 0 0 0
&& sf read 0x100000 0x0 ${boot_size} && zynqrsa 0x100000 && bootm
${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}
rsa_sdboot=echo Copying Image from SD to RAM... && load mmc 0 0x100000
${boot_image} && zynqrsa 0x100000 && bootm ${kernel_load_address}
${ramdisk_load_address} ${devicetree_load_address}
sd_uEnvtxt_existence_test=test -e mmc 0 /uEnv.txt
sdboot=if mmcinfo; then run uenvboot; echo Copying Linux from SD to RAM...
&& load mmc 0 ${kernel_load_address} ${kernel_image} && load mmc 0
${devicetree_load_address} ${devicetree_image} && load mmc 0
${ramdisk_load_address} ${r
amdisk_image} && bootm ${kernel_load_address} ${ramdisk_load_address}
${devicetree_load_address}; fi
serverip=10.10.70.101
stderr=serial
stdin=serial
stdout=serial
thor_mmc=run dfu_mmc_info && thordown 0 mmc 0
thor_ram=run dfu_ram_info && thordown 0 ram 0
uenvboot=if run loadbootenv; then echo Loaded environment from ${bootenv};
run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...;
run uenvcmd; fi
usbboot=if usb start; then run uenvboot; echo Copying Linux from USB to
RAM... && load usb 0 ${kernel_load_address} ${kernel_image} && load usb 0
${devicetree_load_address} ${devicetree_image} && load usb 0
${ramdisk_load_address}
${ramdisk_image} && bootm ${kernel_load_address} ${ramdisk_load_address}
${devicetree_load_address}; fi
Environment size: 4831/131068 bytes
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20150710/86d6dd08/attachment.html>
More information about the meta-xilinx
mailing list