[meta-virtualization] Booting ZCU102 SD image on QEMU

[Pello Heriz]

Hi,

I'm trying to launch QEMU from my SD card but I'm having some problems.

I have followed the instructions that appears on page 37 in the next link:
https://japan.xilinx.com/support/documentation/sw_manuals_j/xilinx2016_2/ug1169-zynqmp-qemu.pdf

All the process was fine until arriving into step number 4. When I tried to
boot QEMU from the SD card, I can see in the terminal that the machine that
I'm trying to use is not supported. Here is the report:

pello at pello-VirtualBox:/opt/yocto_GE/yocto_master/poky/build$
qemu-system-aarch64 -M arm-generic-fdt -nographic -device
loader,file=/opt/yocto_GE/yocto_master/poky/build/tmp/deploy/images/zcu102-zynqmp/fsbl.elf,cpu=0
-dtb
/opt/yocto_GE/yocto_master/poky/build/tmp/deploy/images/zcu102-zynqmp/Image--4.6-xilinx-v2016.4+git0+2762bc9163-r0-zynqmp-zcu102-revB-20170306094246.dtb
-device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 -drive
file=/media/pello/5A08-C4B7/zynqmp_master.img,if=sd,format=raw,index=0-boot
mode=3
qemu-system-aarch64: -drive
file=/media/pello/5A08-C4B7/zynqmp_master.img,if=sd,format=raw,index=0-boot:
unsupported machine type
Use -machine help to list supported machines
pello at pello-VirtualBox:/opt/yocto_GE/yocto_master/poky/build$

What can I do?

Thanks,
Pello
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-virtualization/attachments/20170314/c581ab1f/attachment.html>