[meta-virtualization] Error: kernel-module-xen-acpi-processor not found in the base feeds

[Rob Dobson]

Hi all,

I'm new to OpenEmbedded and I've been trying to use the meta-virtualization layer in order to build a small Xen guest VM.

The target I am building for is 'xen-guest-image-minimal',  however I am hitting a failure complete 'do_rootfs':

       Error: kernel-module-xen-acpi-processor not found in the base feeds (genericx86 core2 i686 i586 i486 i386 x86 noarch any all).

Can anyone see what I'm doing wrong here?

Thanks very much.

Rob

>>>>>> BUILD CONFIG >>>>>>>
Build Configuration:
BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-12.04"
TARGET_SYS        = "i586-poky-linux"
MACHINE           = "genericx86"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5"
TUNE_FEATURES     = "m32 core2"
TARGET_FPU        = ""
meta              
meta-yocto        
meta-yocto-bsp    = "master:64f0a0bc408d8e32d5e795aeb9fffee0539f5e22"
meta-oe           
meta-networking   = "master:b2c0f57f01ee8286c55259c8e0215a7c901699fc"
meta-virtualization = "master:61f1cd9c44f2bf1cb6b3605d2587baf9f439db9a"

>>>>>> MACHINE >>>>>>>
MACHINE ?= "genericx86"

>>>>>> FAILURE MESSAGE >>>>>>>
DEBUG: Executing python function rootfs_process_ignore
DEBUG: Python function rootfs_process_ignore finished
DEBUG: Executing python function rootfs_runtime_mapping
DEBUG: Python function rootfs_runtime_mapping finished
DEBUG: Executing shell function do_rootfs
Note: configuring RPM platform settings
Note: configuring RPM system provides
Note: configuring RPM DB settings
Note: configuring Smart settings

Note: adding Smart channel genericx86 (55)

Note: adding Smart channel core2 (50)

Note: adding Smart channel i586 (40)

Note: adding Smart channel all (10)

Note: configuring RPM cross-install scriptlet_wrapper

Updating cache...               ######################################## [100%]

Saving cache...

Error: kernel-module-xen-acpi-processor not found in the base feeds (genericx86 core2 i686 i586 i486 i386 x86 noarch any all).
WARNING: exit code 1 from a shell command.
ERROR: Function failed: do_rootfs (log file is located at /local/files/yocto/poky-dora-10.0.0/build/tmp/work/genericx86-poky-linux/xen-guest-image-minimal/1.0-r0/temp/log.do_rootfs.21957)

>>>>>> BBLAYERS >>>>>>
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "6"

BBPATH = "${TOPDIR}"
BBFILES ?= ""

BBLAYERS ?= " \
  /local/files/yocto/poky-dora-10.0.0/meta \
  /local/files/yocto/poky-dora-10.0.0/meta-yocto \
  /local/files/yocto/poky-dora-10.0.0/meta-yocto-bsp \
  /local/files/yocto/poky-dora-10.0.0/meta-oe/meta-oe \
  /local/files/yocto/poky-dora-10.0.0/meta-oe/meta-networking \
  /local/files/yocto/poky-dora-10.0.0/meta-virtualization \
  "
BBLAYERS_NON_REMOVABLE ?= " \
  /local/files/yocto/poky-dora-10.0.0/meta \
  /local/files/yocto/poky-dora-10.0.0/meta-yocto \
  "

>>>>>> meta-oe/conf/layer.conf >>>>>>
Updated priority:
       BBFILE_PRIORITY_openembedded-layer = "4"