[meta-ti] omap3evm: bitbake x-load fails

[Joe Keene]

When I try the command: "bitbake x-load", it will almost finish executing
the RunQueue tasks when it fails around 97% progress. I believe these are
the trouble lines:

>From what I understand, it means that the cross-compiler fails to find the
gcc library. How can I help it find the gcc library? Is the sysroot
variable hard-coded? The Log is pretty big, so I'm just going to post the
part that I think is relevant. If you want the full log let me know!

-VirtualBox:/poky/build$ bitbake x-load
Loading cache: 100%
|###############################################################################|
Time: 0:00:01
Loaded 2738 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION           = "1.39.1"
BUILD_SYS            = "x86_64-linux"
NATIVELSBSTRING      = "universal"
TARGET_SYS           = "arm-poky-linux-gnueabi"
MACHINE              = "omap3evm"
DISTRO               = "poky"
DISTRO_VERSION       = "2.5+snapshot-20180829"
TUNE_FEATURES        = "arm armv7a vfp thumb neon callconvention-hard"
TARGET_FPU           = "hard"
meta
meta-poky
meta-yocto-bsp       = "master:87d3a9685dd9613e4f6718031d4ebd9344b01c47"
meta-ti              = "master:b987670824163d9aaf45af5661dc916515ec5fea"
meta                 = "master:853e0499be449c71378c087e08b1926be8e2ac87"

Initialising tasks: 100%
|##########################################################################|
Time: 0:00:00
Sstate summary: Wanted 60 Found 0 Missed 60 Current 15 (0% match, 20%
complete)
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
WARNING: glibc-2.28-r0 do_package: glibc-extra-nss-2.26 was registered as
shlib provider for libnss_db.so.2, changing it to libnss-db-2.28 because it
was built later
ERROR: x-load-1_1.5.1-r3 do_compile: oe_runmake failed
ERROR: x-load-1_1.5.1-r3 do_compile: Function failed: do_compile (log file
is located at
/poky/build/tmp/work/omap3evm-poky-linux-gnueabi/x-load/1_1.5.1-r3/temp/log.do_compile.25161)
ERROR: Logfile of failure stored in:
/poky/build/tmp/work/omap3evm-poky-linux-gnueabi/x-load/1_1.5.1-r3/temp/log.do_compile.25161
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make CROSS_COMPILE=arm-poky-linux-gnueabi- CONFIG_HEADER= distclean
| find
/poky/build/tmp/work/omap3evm-poky-linux-gnueabi/x-load/1_1.5.1-r3/git
-type f \
|     \( -name 'core' -o -name '*.bak' -o -name '*~' \
|     -o -name '*.o'  -o -name '*.a'  \) -print \
|     | xargs rm -f
...
(removed a bunch of lines)
...
| make[1]: Leaving directory
'/poky/build/tmp/work/omap3evm-poky-linux-gnueabi/x-load/1_1.5.1-r3/git/lib'
| UNDEF_SYM=`arm-poky-linux-gnueabi-objdump -x board/omap3evm/libomap3evm.a
common/libcommon.a cpu/omap3/libomap3.a disk/libdisk.a drivers/libdrivers.a
fs/fat/libfat.a lib/libarm.a |sed  -n -e
's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
|     cd
/poky/build/tmp/work/omap3evm-poky-linux-gnueabi/x-load/1_1.5.1-r3/git &&
arm-poky-linux-gnueabi-ld -Bstatic -T
/poky/build/tmp/work/omap3evm-poky-linux-gnueabi/x-load/1_1.5.1-r3/git/board/omap3evm/x-load.lds
-Ttext 0x40200800  $UNDEF_SYM cpu/omap3/start.o \
|         --start-group board/omap3evm/libomap3evm.a common/libcommon.a
cpu/omap3/libomap3.a disk/libdisk.a drivers/libdrivers.a fs/fat/libfat.a
lib/libarm.a --end-group -L . -lgcc \
|         -Map x-load.map -o x-load
| arm-poky-linux-gnueabi-ld: cannot find -lgcc
| ERROR: oe_runmake failed
| Makefile:163: recipe for target 'x-load' failed
| make: *** [x-load] Error 1
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at
/poky/build/tmp/work/omap3evm-poky-linux-gnueabi/x-load/1_1.5.1-r3/temp/log.do_compile.25161)
ERROR: Task (/poky/meta-ti/recipes-bsp/x-load/x-load_git.bb:do_compile)
failed with exit code '1'
NOTE: Tasks Summary: Attempted 431 tasks of which 125 didn't need to be
rerun and 1 failed.

Summary: 1 task failed:
  /poky/meta-ti/recipes-bsp/x-load/x-load_git.bb:do_compile
Summary: There was 1 WARNING message shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.


I'm fairly new to Embedded Linux and the Yocto Project, so I fear I might
be missing something very basic. I'd be happy to provide any additional
information.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-ti/attachments/20180829/6c57cf14/attachment.html>