[meta-ti] Getting Started with meta-ti "rocko" and beaglebone black (BBB)

[Denys Dmytriyenko]

Check if your rootfs contains zImage and DTBs in /boot as well as modules in 
/lib/modules - I don't believe "minimal" image handles those automatically.

Alternatively, don't use "minimal" image, but rather "base" or a more 
specialized image.

-- 
Denys


On Wed, Aug 22, 2018 at 11:18:49AM -0700, Leo Meza wrote:
> I'm learning yocto and was able to easily boot my BBB with a
> core-image-minimal system using the meta-yocto-bsp layer. However, when I
> removed that layer and tried with meta-ti, I just see this on the Putty
> serial console, it repeats over an over:
> 
> U-Boot SPL 2018.01-g6d540394a4 (Aug 22 2018 - 16:33:01)
> Trying to boot from MMC1
> *** Warning - bad CRC, using default environment
> 
> I'm copying MLO, zImage, u-boot.img, and am335x-boneblack.dtb to the BOOT
> (1st) partition of my uSD card. Then extracting
> core-image-minimal-beaglebone.tar.xz -C to the ROOT (2nd) partition of my
> uSD card. This works fine when using meta-yocto-bsp, but not with meta-ti.
> So, if anyone can help me understand what the different steps are between
> using the two different layers, I'd greatly appreciate it. Spent several
> days trying to figure this out so far.
> 
> Thanks in advance,
> Leo

> -- 
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti