[meta-ti] install cannot stat u-boot.img (Pyro)

[Denys Dmytriyenko]

Do you use meta-ti layer?


On Sat, Jun 24, 2017 at 02:50:32AM +0000, Kenny Koller wrote:
> Hi,
> 
> I'm using 2.3 to build the minimal Beaglebone Black images.
> 
> I issue the following and get the error below. Is the warning regarding a
> missing bootloader config the issue?
> 
> Thanks,
> 
> Kenny
> 
> $ bitbake core-image-minimal
> 
> | INFO: Creating image(s)...
> |
> | WARNING: bootloader config not specified, using defaults
> |
> | ERROR: _exec_cmd: install -m 0644 -D
> /home/ubuntu/yocto/poky/build/tmp/deploy/images/beaglebone/u-boot.img
> /home/ubuntu/yocto/poky/build/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/deploy-core-image-minimal-image-complete/core-image-minimal-beaglebone-20170624014756/tmp.wic.khxryxga/boot/u-boot.img
> returned '1' instead of 0
> | output: install: cannot stat
> '/home/ubuntu/yocto/poky/build/tmp/deploy/images/beaglebone/u-boot.img': No
> such file or directory
> |
> | WARNING: exit code 1 from a shell command.
> | ERROR: Function failed: do_image_wic (log file is located at
> /home/ubuntu/yocto/poky/build/tmp/work/beaglebone-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_image_wic.12719)
> ERROR: Task
> (/home/ubuntu/yocto/poky/meta/recipes-core/images/core-image-minimal.bb:do_image_wic)
> failed with exit code '1'
> NOTE: Tasks Summary: Attempted 2263 tasks of which 2252 didn't need to be
> rerun and 1 failed.
> 
> Summary: 1 task failed:
>   /home/ubuntu/yocto/poky/meta/recipes-core/images/core-image-minimal.bb:
> do_image_wic
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.

> -- 
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti