[meta-ti] [PATCH] ti-ipc-rtos: Update to include examples and documentation with the package

Stiffler, Jacob j-stiffler at ti.com
Fri May 13 12:12:30 PDT 2016



> -----Original Message-----
> From: meta-ti-bounces at yoctoproject.org [mailto:meta-ti-
> bounces at yoctoproject.org] On Behalf Of Dmytriyenko, Denys
> Sent: Friday, May 13, 2016 2:57 PM
> To: Nelson, Sam
> Cc: meta-ti at yoctoproject.org
> Subject: Re: [meta-ti] [PATCH] ti-ipc-rtos: Update to include examples and
> documentation with the package
> 
> Sam,
> 
> Is this v2? You didn't specify changes since v1, so I would have to dig out
> the previous submission and check that past comments were addressed.
> 
> Jake,
> 
> Do you have any comments here?
> 
> 
> On Wed, May 11, 2016 at 02:00:39PM -0400, Sam Nelson wrote:
> > Updated to new version 3.42.01.03
> > Added procedures and source urls for adding examples and
> documentation
> > into src package.
> > Added dependency on doxygen for document creation
> > Added big endian c66 targets
> > Updated uniform formatting
> >
> > Signed-off-by: Sam Nelson <sam.nelson at ti.com>
> > ---
> >  recipes-ti/ipc/ti-ipc-rtos_git.bb | 119
> ++++++++++++++++++++++++++++++++------
> >  recipes-ti/ipc/ti-ipc.inc         |   6 +-
> >  2 files changed, 104 insertions(+), 21 deletions(-)
> >
> > diff --git a/recipes-ti/ipc/ti-ipc-rtos_git.bb b/recipes-ti/ipc/ti-ipc-
> rtos_git.bb
> > index 4c0fc74..8fb448f 100644
> > --- a/recipes-ti/ipc/ti-ipc-rtos_git.bb
> > +++ b/recipes-ti/ipc/ti-ipc-rtos_git.bb
> > @@ -2,9 +2,44 @@ require recipes-ti/includes/ti-paths.inc
> >  require recipes-ti/includes/ti-staging.inc
> >  require ti-ipc.inc
> >
> > -PR = "${INC_PR}.4"
> > +TI_IPC_EXAMPLES_GIT_URI = "git://git.ti.com/ipc/ipc-examples.git"
> > +TI_IPC_EXAMPLES_DEST_SUFFIX = "git/ipc-examples"
> > +TI_IPC_EXAMPLES_GIT_PROTOCOL = "git"
> > +TI_IPC_EXAMPLES_GIT_BRANCH = "master"
> > +TI_IPC_EXAMPLES_NAME = "ipc-examples"
> >
> > -DEPENDS = "ti-xdctools ti-sysbios"
> > +SRC_URI += "${TI_IPC_EXAMPLES_GIT_URI};\
> > +destsuffix=${TI_IPC_EXAMPLES_DEST_SUFFIX};\
> > +protocol=${TI_IPC_EXAMPLES_GIT_PROTOCOL};\
> > +branch=${TI_IPC_EXAMPLES_GIT_BRANCH};\
> > +name=${TI_IPC_EXAMPLES_NAME}"
> > +
> > +TI_IPC_METADATA_GIT_URI = "git://git.ti.com/ipc/ipc-metadata.git"
> > +TI_IPC_METADATA_DEST_SUFFIX = "git/ipc-metadata"
> > +TI_IPC_METADATA_GIT_PROTOCOL = "git"
> > +TI_IPC_METADATA_GIT_BRANCH = "master"
> > +TI_IPC_METADATA_NAME = "ipc-metadata"
> > +
> > +SRC_URI += "${TI_IPC_METADATA_GIT_URI};\
> > +destsuffix=${TI_IPC_METADATA_DEST_SUFFIX};\
> > +protocol=${TI_IPC_METADATA_GIT_PROTOCOL};\
> > +branch=${TI_IPC_METADATA_GIT_BRANCH};\
> > +name=${TI_IPC_METADATA_NAME}"
> > +
> > +# Corresponds to tag: 3.42.01.03
> > +SRCREV_ipc-examples = "bd4f28bd46467553e6610629ff13b4b5b3ba3af0"
> > +
> > +# Corresponds to tag: 3.42.01.03
> > +SRCREV_ipc-metadata = "4d01fe4a7c41d2ce76a62b4325e66753d59b298c"
> > +
> > +SRCREV_FORMAT = "ipc-metadata_ipc-examples"

I'm not sure about this SRCREV_FORMAT. Should it also contain the main ipc git SRCREV? And is this needed if SRCPV is not in the PV?

> > +
> > +S_ipc-examples = "${WORKDIR}/git/ipc-examples"
> > +S_ipc-metadata = "${WORKDIR}/git/ipc-metadata"
> > +
> > +PR = "${INC_PR}.0"
> > +
> > +DEPENDS = "ti-xdctools ti-sysbios doxygen-native"
> >  DEPENDS_append_keystone = " ti-cgt6x-native \
> >                              gcc-arm-none-eabi-native \
> >  "
> > @@ -12,6 +47,8 @@ DEPENDS_append_omap-a15 = " ti-cgt6x-native \
> >                              ti-ccsv6-native \
> >                              gcc-arm-none-eabi-native \
> >  "
> > +DEPENDS_append_c66x = " ti-cgt6x-native \
> > +"

These c66x machines have not yet been accepted into meta-ti.

> >
> >  PACKAGES =+ "${PN}-fw"
> >  FILES_${PN}-fw = "${base_libdir}/firmware/*"
> > @@ -26,6 +63,7 @@ IPC_TARGETS = ""
> >  IPC_TARGETS_omap-a15 = "\
> >      gnu.targets.arm.A15F="${GCC_ARM_NONE_TOOLCHAIN}" \
> >      ti.targets.elf.C66="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x" \
> > +
> ti.targets.elf.C66_big_endian="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-
> c6x" \
> >      ti.targets.arm.elf.M4="${M4_TOOLCHAIN_INSTALL_DIR}" \
> >      ti.targets.arm.elf.M4F="${M4_TOOLCHAIN_INSTALL_DIR}" \
> >  "
> > @@ -33,18 +71,66 @@ IPC_TARGETS_omap-a15 = "\
> >  IPC_TARGETS_keystone = " \
> >      gnu.targets.arm.A15F="${GCC_ARM_NONE_TOOLCHAIN}" \
> >      ti.targets.elf.C66="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x" \
> > +
> ti.targets.elf.C66_big_endian="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-
> c6x" \
> > +"
> > +
> > +IPC_TARGETS_c66x = " \
> > +    ti.targets.elf.C66="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x" \
> > +
> ti.targets.elf.C66_big_endian="${STAGING_DIR_NATIVE}/usr/share/ti/cgt-
> c6x" \
> >  "
> >
> >  EXTRA_OEMAKE = "\
> >      PLATFORM=${PLATFORM} \
> >      XDC_INSTALL_DIR="${XDC_INSTALL_DIR}" \
> >      BIOS_INSTALL_DIR="${SYSBIOS_INSTALL_DIR}" \
> > -    ${IPC_TARGETS} -f ipc-bios.mak\
> > +    ${IPC_TARGETS} \
> >  "
> >
> > +RELEASE_TYPE = "GA"
> > +RELEASE_SUFFIX = ""
> > +
> > +SRCIPK_SRC_DIR = "${D}${IPC_INSTALL_DIR_RECIPE}"
> > +SRCIPK_INSTALL_DIR = "ipc_${@'${PV}'.replace('.',
> '_')}${RELEASE_SUFFIX}"

This already specified in meta-arago's arago-source-ipk.conf?

> > +
> >  do_compile() {
> > -  oe_runmake clean
> > -  oe_runmake all
> > +  oe_runmake -f ipc-bios.mak clean
> > +  oe_runmake -f ipc-bios.mak release
> > +
> > +  cd ${S_ipc-metadata}
> > +  oe_runmake .all-files IPC_INSTALL_DIR="${S}" \
> > +    BUILD_HOST_OS="linux" \
> > +    RELEASE_TYPE="${RELEASE_TYPE}"
> > +
> > +  cd ${S_ipc-examples}/src
> > +  oe_runmake .examples \
> > +    IPCTOOLS="${S_ipc-metadata}/src/etc"
> > +
> > +  if [  "${PLATFORM}" != "UNKNOWN" ]; then
> > +    oe_runmake extract HOSTOS="bios" IPC_INSTALL_DIR="${S}"
> > +    oe_runmake extract HOSTOS="linux" IPC_INSTALL_DIR="${S}"
> > +
> > +    if [ ! -z ${ALT_PLATFORM} ]; then
> > +      oe_runmake extract PLATFORM=${ALT_PLATFORM} HOSTOS="bios"
> IPC_INSTALL_DIR="${S}"
> > +      oe_runmake extract PLATFORM=${ALT_PLATFORM} HOSTOS="linux"
> IPC_INSTALL_DIR="${S}"
> > +    fi
> > +  fi
> > +
> > +  IPC_VERSION=`echo ${PV}${RELEASE_SUFFIX} | sed -e 's|\.|_|g'`
> > +  # Copy docs and other meta files
> > +  install -d ${D}${IPC_INSTALL_DIR_RECIPE}
> > +  cp -pPrf  ${S_ipc-metadata}/exports/ipc_${IPC_VERSION}/* -d
> ${D}${IPC_INSTALL_DIR_RECIPE}
> > +
> > +  # Copy example folders corresponding to the platforms
> > +  if [  "${PLATFORM}" != "UNKNOWN" ]; then
> > +    install -d ${D}${IPC_INSTALL_DIR_RECIPE}/examples
> > +    cp -pPf ${S_ipc-examples}/src/examples/*.*
> ${D}${IPC_INSTALL_DIR_RECIPE}/examples/
> > +    cp -pPf ${S_ipc-examples}/src/examples/makefile
> ${D}${IPC_INSTALL_DIR_RECIPE}/examples/
> > +    cp -pPrf ${S_ipc-examples}/src/examples/${PLATFORM}*
> ${D}${IPC_INSTALL_DIR_RECIPE}/examples/
> > +    if [ ! -z ${ALT_PLATFORM} ]; then
> > +      cp -pPrf ${S_ipc-examples}/src/examples/${ALT_PLATFORM}*
> ${D}${IPC_INSTALL_DIR_RECIPE}/examples/
> > +    fi
> > +    find ${D}${IPC_INSTALL_DIR_RECIPE}/examples/ -name "*zip" -type f |
> xargs -I {} rm {}
> > +  fi

Why do all of this installation in the do_compile stage? Should it be in do_install?

> >  }
> >
> >  do_compile_append() {
> > @@ -52,25 +138,22 @@ do_compile_append() {
> >  }
> >
> >  do_install() {
> > -    install -d ${D}${IPC_INSTALL_DIR_RECIPE}
> > -    cp -pPrf ${S}/* ${D}${IPC_INSTALL_DIR_RECIPE}
> > -
> > -    install -d ${D}${base_libdir}/firmware/ipc
> > -    cp -pPrf ${S}/packages/ti/ipc/tests/bin/*
> ${D}${base_libdir}/firmware/ipc
> > +  install -d ${D}${base_libdir}/firmware/ipc
> > +  cp -pPrf ${S}/packages/ti/ipc/tests/bin/*
> ${D}${base_libdir}/firmware/ipc
> >  }
> >
> >  ALTERNATIVE_PRIORITY = "5"
> >
> >  pkg_postinst_${PN}-fw_omap-a15 () {
> > -	update-alternatives --install /lib/firmware/dra7-dsp1-fw.xe66 dra7-
> dsp1-fw.xe66
> ipc/ti_platforms_evmDRA7XX_dsp1/test_omx_dsp1_vayu.xe66
> ${ALTERNATIVE_PRIORITY}
> > -	update-alternatives --install /lib/firmware/dra7-dsp2-fw.xe66 dra7-
> dsp2-fw.xe66
> ipc/ti_platforms_evmDRA7XX_dsp2/test_omx_dsp2_vayu.xe66
> ${ALTERNATIVE_PRIORITY}
> > -	update-alternatives --install /lib/firmware/dra7-ipu1-fw.xem4 dra7-
> ipu1-fw.xem4
> ipc/ti_platforms_evmDRA7XX_ipu1/test_omx_ipu1_vayu.xem4
> ${ALTERNATIVE_PRIORITY}
> > -	update-alternatives --install /lib/firmware/dra7-ipu2-fw.xem4 dra7-
> ipu2-fw.xem4
> ipc/ti_platforms_evmDRA7XX_ipu2/test_omx_ipu2_vayu.xem4
> ${ALTERNATIVE_PRIORITY}
> > +  update-alternatives --install /lib/firmware/dra7-dsp1-fw.xe66 dra7-
> dsp1-fw.xe66
> ipc/ti_platforms_evmDRA7XX_dsp1/test_omx_dsp1_vayu.xe66
> ${ALTERNATIVE_PRIORITY}
> > +  update-alternatives --install /lib/firmware/dra7-dsp2-fw.xe66 dra7-
> dsp2-fw.xe66
> ipc/ti_platforms_evmDRA7XX_dsp2/test_omx_dsp2_vayu.xe66
> ${ALTERNATIVE_PRIORITY}
> > +  update-alternatives --install /lib/firmware/dra7-ipu1-fw.xem4 dra7-
> ipu1-fw.xem4
> ipc/ti_platforms_evmDRA7XX_ipu1/test_omx_ipu1_vayu.xem4
> ${ALTERNATIVE_PRIORITY}
> > +  update-alternatives --install /lib/firmware/dra7-ipu2-fw.xem4 dra7-
> ipu2-fw.xem4
> ipc/ti_platforms_evmDRA7XX_ipu2/test_omx_ipu2_vayu.xem4
> ${ALTERNATIVE_PRIORITY}
> >  }
> >
> >  pkg_postrm_${PN}-fw_omap-a15 () {
> > -	update-alternatives --remove dra7-dsp1-fw.xe66
> ipc/ti_platforms_evmDRA7XX_dsp1/test_omx_dsp1_vayu.xe66
> > -	update-alternatives --remove dra7-dsp2-fw.xe66
> ipc/ti_platforms_evmDRA7XX_dsp2/test_omx_dsp2_vayu.xe66
> > -	update-alternatives --remove dra7-ipu1-fw.xem4
> ipc/ti_platforms_evmDRA7XX_ipu1/test_omx_ipu1_vayu.xem4
> > -	update-alternatives --remove dra7-ipu2-fw.xem4
> ipc/ti_platforms_evmDRA7XX_ipu2/test_omx_ipu2_vayu.xem4
> > +  update-alternatives --remove dra7-dsp1-fw.xe66
> ipc/ti_platforms_evmDRA7XX_dsp1/test_omx_dsp1_vayu.xe66
> > +  update-alternatives --remove dra7-dsp2-fw.xe66
> ipc/ti_platforms_evmDRA7XX_dsp2/test_omx_dsp2_vayu.xe66
> > +  update-alternatives --remove dra7-ipu1-fw.xem4
> ipc/ti_platforms_evmDRA7XX_ipu1/test_omx_ipu1_vayu.xem4
> > +  update-alternatives --remove dra7-ipu2-fw.xem4
> ipc/ti_platforms_evmDRA7XX_ipu2/test_omx_ipu2_vayu.xem4
> >  }
> > diff --git a/recipes-ti/ipc/ti-ipc.inc b/recipes-ti/ipc/ti-ipc.inc
> > index 69127aa..9c5dfed 100644
> > --- a/recipes-ti/ipc/ti-ipc.inc
> > +++ b/recipes-ti/ipc/ti-ipc.inc
> > @@ -8,15 +8,15 @@ TI_IPC_GIT_URI = "git://git.ti.com/ipc/ipcdev.git"
> >  TI_IPC_GIT_PROTOCOL = "git"
> >  TI_IPC_GIT_BRANCH = "3.42"
> >
> > -#Corresponds to 3.42.00.02
> > -TI_IPC_SRCREV = "a520969994378fb2629d7dfc25f306c3a711b5bc"
> > +#Corresponds to 3.42.01.03
> > +TI_IPC_SRCREV = "dc6c5082f478225b7fbce4216173e6c5b36100b4"
> >
> >  BRANCH = "${TI_IPC_GIT_BRANCH}"
> >  SRC_URI =
> "${TI_IPC_GIT_URI};protocol=${TI_IPC_GIT_PROTOCOL};branch=${BRANCH}"
> >  SRCREV = "${TI_IPC_SRCREV}"
> >
> >  S = "${WORKDIR}/git"
> > -PV = "3.42.00.02"
> > +PV = "3.42.01.03"
> >  INC_PR = "r0"
> >
> >  PACKAGE_ARCH = "${MACHINE_ARCH}"
> > --
> > 1.9.1
> >
> > --
> > _______________________________________________
> > meta-ti mailing list
> > meta-ti at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-ti
> --
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti


More information about the meta-ti mailing list