[meta-ti] [PATCH] wic: wks and source plugin for creating SD card images
Denys Dmytriyenko
denys at ti.com
Fri Jul 18 08:52:51 PDT 2014
On Fri, Jul 18, 2014 at 03:46:35PM +0200, Maciej Borzecki wrote:
> Commit 2b524321a25c35c5f987b8331e41b49d3b2e2d2b removed bbclass for
> building SD card images in favor of using wic. This commit adds a mic
> source plugin that prepares a useable boot partition as part of wic's
> image creation process. The plugin defines a new source type -
> beaglebonebootimg, similarly to the existing bootimg-{efi,pcbios} in
> current poky tree.
>
> An example *.wks for setting up the partitions is provided as well.
> Usage:
>
> wic create beaglebonesdimage -e core-image-minimal
Not bad! The code looks rather clean.
Is --ondisk in .wks being locked to a specific SD card device?
And in general - this can be extended and re-used for other platforms in
meta-ti, not just BeagleBone.
> Signed-off-by: Maciej Borzecki <maciej.borzecki at open-rnd.pl>
> Signed-off-by: Maciek Borzecki <maciek.borzecki at gmail.com>
> ---
> scripts/lib/image/canned-wks/beaglebonesdimage.wks | 5 +
> .../lib/mic/plugins/source/beaglebonebootimg.py | 109 +++++++++++++++++++++
> 2 files changed, 114 insertions(+)
> create mode 100644 scripts/lib/image/canned-wks/beaglebonesdimage.wks
> create mode 100644 scripts/lib/mic/plugins/source/beaglebonebootimg.py
>
> diff --git a/scripts/lib/image/canned-wks/beaglebonesdimage.wks b/scripts/lib/image/canned-wks/beaglebonesdimage.wks
> new file mode 100644
> index 0000000..efd302d
> --- /dev/null
> +++ b/scripts/lib/image/canned-wks/beaglebonesdimage.wks
> @@ -0,0 +1,5 @@
> +# short-description: Create SD card image for BeagleBone
> +# long-description: Creates a partitioned SD card image for use with BeagleBone
> +
> +part /boot --source beaglebonebootimg --ondisk mmcblk0 --fstype=vfat --label boot --active --align 1024 --size 10
> +part / --source rootfs --ondisk mmcblk0 --fstype=ext3 --label root --align 1024
> diff --git a/scripts/lib/mic/plugins/source/beaglebonebootimg.py b/scripts/lib/mic/plugins/source/beaglebonebootimg.py
> new file mode 100644
> index 0000000..969632b
> --- /dev/null
> +++ b/scripts/lib/mic/plugins/source/beaglebonebootimg.py
> @@ -0,0 +1,109 @@
> +# ex:ts=4:sw=4:sts=4:et
> +# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
> +#
> +# This program is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License version 2 as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License along
> +# with this program; if not, write to the Free Software Foundation, Inc.,
> +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> +#
> +# DESCRIPTION
> +# This implements the 'beaglebonebootimg' source plugin class for 'wic'
> +#
> +# AUTHORS
> +# Maciej Borzecki <maciej.borzecki (at] open-rnd.pl>
> +#
> +
> +import os
> +import shutil
> +import re
> +import tempfile
> +
> +from mic import kickstart, chroot, msger
> +from mic.utils import misc, fs_related, errors, runner, cmdln
> +from mic.conf import configmgr
> +from mic.plugin import pluginmgr
> +from mic.utils.partitionedfs import PartitionedMount
> +import mic.imager.direct as direct
> +from mic.pluginbase import SourcePlugin
> +from mic.utils.oe.misc import *
> +from mic.imager.direct import DirectImageCreator
> +
> +class BootimgPcbiosPlugin(SourcePlugin):
> + name = 'beaglebonebootimg'
> +
> + @classmethod
> + def do_install_disk(self, disk, disk_name, cr, workdir, oe_builddir,
> + bootimg_dir, kernel_dir, native_sysroot):
> + """
> + Called after all partitions have been prepared and assembled into a
> + disk image. Do nothing.
> + """
> + pass
> +
> + @classmethod
> + def do_configure_partition(self, part, cr, cr_workdir, oe_builddir,
> + bootimg_dir, kernel_dir, native_sysroot):
> + """
> + Called before do_prepare_partition(). Possibly prepare
> + configuration files of some sort.
> +
> + """
> + pass
> +
> + @classmethod
> + def do_prepare_partition(self, part, cr, cr_workdir, oe_builddir, bootimg_dir,
> + kernel_dir, rootfs_dir, native_sysroot):
> + """
> + Called to do the actual content population for a partition i.e. it
> + 'prepares' the partition to be incorporated into the image.
> + In this case, does the following:
> + - sets up a vfat partition
> + - copies u-boot
> + - copies MLO
> + """
> + hdddir = "%s/boot" % cr_workdir
> + rm_cmd = "rm -rf %s" % cr_workdir
> + exec_cmd(rm_cmd)
> +
> + install_cmd = "install -d %s" % hdddir
> + tmp = exec_cmd(install_cmd)
> +
> + img_deploy_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
> +
> + mlo_img = "MLO"
> + mlo_src_path = os.path.join(img_deploy_dir, mlo_img)
> +
> + uboot_img = "u-boot.img"
> + uboot_src_path = os.path.join(img_deploy_dir, uboot_img)
> +
> + for entry in [(mlo_src_path, "MLO"), (uboot_src_path, "u-boot.img")]:
> + file_src, file_dst = entry
> + print '-- install %s as %s' % (file_src, file_dst)
> + install_cmd = "install -m 0644 %s %s" \
> + % (file_src, os.path.join(hdddir, file_dst))
> + tmp = exec_cmd(install_cmd)
> +
> + if part.get_size() == 0:
> + msger.error('Boot partition may not be 0 in size')
> +
> + du_cmd = "du -bks %s" % hdddir
> + rc, out = exec_cmd(du_cmd)
> + blocks = int(out.split()[0])
> +
> + extra_blocks = part.get_extra_block_count(blocks)
> + if extra_blocks == 0:
> + msger.error('Not enough space in boot parition')
> +
> + part.prepare_empty_partition(cr_workdir, oe_builddir, native_sysroot)
> +
> + mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (part.source_file, hdddir)
> + exec_native_cmd(mcopy_cmd, native_sysroot)
> +
> --
> 1.9.0
>
> --
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
More information about the meta-ti
mailing list