[meta-ti] oe_runmake failed issue for 2.6.32 kernel

Denys Dmytriyenko denys at ti.com
Thu Jun 27 07:15:36 PDT 2013


On Wed, Jun 26, 2013 at 09:28:38AM +0530, Sudhangathan B S wrote:
> On my way to install 2.6.32 kernel for the Beagle board image. I need this
> kernel to work with the leopard imaging/aptina camera module/sensors. I'm
> encountering this "oe_runmake failed" issue. I have strong feeling it is
> Yocto or the meta-ti layers, which is not set properly. On the web i got
> related issues, but they are too old, and were related to OE.
> 
> I'm using danny branch. I had downloaded meta-ti, openembedded-core, and
> meta-oe as .zip files meant for danny branch. Thanks to Denys D at ti for
> help. I integrated meta-ti with yocto, and also built the image with the
> default 3.2 kernel, and further with 2.6.37 kernel too, successfully.
> 
> I have also included partial terminal output below.!
> 
> These are a few lines from
> /home/asahota/danny-try/danny-8.0/meta-ti/conf/machine/beagleboard.conf
> *******START
> #@TYPE: Machine
> #@NAME: Beagleboard machine
> #@DESCRIPTION: Machine configuration for the http://beagleboard.org/ board
> 
> require conf/machine/include/omap3.inc
> 
> # Only has DVI connector for external screen
> GUI_MACHINE_CLASS = "bigscreen"
> 
> #PREFERRED_PROVIDER_virtual/kernel = "linux-mainline"
> PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"                <----
> change
> PREFERRED_VERSION_linux-omap-psp = "2.6.32"
> PREFERRED_PROVIDER_virtual/bootloader = "u-boot-beagleboard"
> PREFERRED_PROVIDER_u-boot = "u-boot-beagleboard"
> 
> IMAGE_FSTYPES += "tar.gz ubi"
> EXTRA_IMAGECMD_jffs2 = "-lnp"
> 
> SERIAL_CONSOLE = "115200 ttyO2"
> 
> UBOOT_MACHINE = "omap3_beagle_config"
> *******END
> 
> 
> These are the FIRST few lines of my terminal output, for the command
> bitbake core-image-sato
> *******START
> WARNING: Host distribution "Ubuntu 12.04.2 LTS" has not been validated with
> this version of the build system; you may possibly experience unexpected
> failures. It is recommended that you use a tested distribution.
> Loading cache: 100%
> |###################################################################################################################################|
> ETA:  00:00:00
> Loaded 1210 entries from dependency cache.
> 
> Build Configuration:
> BB_VERSION        = "1.16.0"
> TARGET_ARCH       = "arm"
> TARGET_OS         = "linux-gnueabi"
> MACHINE           = "beagleboard"
> DISTRO            = "poky"
> DISTRO_VERSION    = "1.3"
> TUNE_FEATURES     = "armv7a vfp neon cortexa8"
> TARGET_FPU        = "vfp-neon"
> meta
> meta-yocto
> meta-ti
> meta-yocto-bsp    = "<unknown>:<unknown>"
> 
> NOTE: Resolving any missing task queue dependencies
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> *******END
> 
> 
> These are the LAST few lines of my terminal output, for the command bitbake
> -vvv core-image-sato
> *******START
> | include/linux/pagemap.h: In function 'fault_in_pages_readable':
> | include/linux/pagemap.h:413:16: warning: variable 'c' set but not used
> [-Wunused-but-set-variable]
>  |   LD      fs/ubifs/ubifs.o
> |   LD      fs/ubifs/built-in.o
> |   LD      fs/built-in.o
> | ERROR: oe_runmake failed
> | ERROR: Function failed: do_compileconfigs (see
> /home/asahota/danny-try/danny-8.0/build/tmp/work/beagleboard-poky-linux-gnueabi/linux-omap-psp-2.6.32-r0/temp/log.do_compileconfigs.28440
> for further information)

That is not enough backlog to see the error. You should scroll back until you 
see the error message.


> ERROR: Task 805
> (/home/asahota/danny-try/danny-8.0/meta-ti/recipes-kernel/linux/
> linux-omap-psp_2.6.32.bb, do_compileconfigs) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 5104 tasks of which 5097 didn't need to be
> rerun and 1 failed.
> No currently running tasks (5104 of 5135)
> 
> Summary: 1 task failed:
>   /home/asahota/danny-try/danny-8.0/meta-ti/recipes-kernel/linux/
> linux-omap-psp_2.6.32.bb, do_compileconfigs
> Summary: There was 1 WARNING message shown.
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> *****END
> 
> I spent a lot of time tracing the error in the YP folders and files. It was
> somewhere near kernel_do_configure. But I couldn't get where "oe_runmake"
> is. Couldn't continue debugging.
> 
> ---------------------------------
> Sudhangathan BS
> Ph:(+91) 9731-905-205
> ---------------------------------

> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti




More information about the meta-ti mailing list