[meta-ti] which kernel for pandaboard?
Enrico
ebutera at users.sourceforge.net
Wed Nov 21 04:58:37 PST 2012
On Tue, Nov 20, 2012 at 3:02 PM, Cliff Brake <cliff.brake at gmail.com> wrote:
> Enrico sent me a uImage which I tried and it does the same thing:
>
> ....
> [ 0.000000] OMAP4430 ES2.0
> ....
> [ 2.950775] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok
> [ 2.958465] u32 classifier
> [ 2.961364] Actions configured
> [ 2.965332] TCP: cubic registered
> [ 2.969390] NET: Registered protocol family 10
> [ 2.974975] NET: Registered protocol family 17
> [ 2.979858] lib80211: common routines for IEEE802.11 drivers
> [ 2.986053] Registering the dns_resolver key type
> [ 2.991271] VFP support v0.3: implementor 41 architecture 3 part 30
> variant 9 rev 1
> [ 2.999572] ThumbEE CPU extension supported.
> [ 3.004211] Registering SWP/SWPB emulation handler
>
> (stops here)
>
> As mentioned before, mainline kernels boot fine on this board, so it
> appears the meta-ti kernel has problems with at least some non-ES
> Panda boards.
>
> Enrico, can you send me a complete boot log from your system? Perhaps
> if I can see which drivers are being initialized after the above
> message, then we can more easily narrow it down.
>
> Also, do you have the display working on your system? If so, did you
> have to add any special kernel command line args to select the display
> format, etc?
Attached a boot log with hdmi monitor connected, as you can see i use
no kernel args for display but i get a working 1080p console (i didn't
test X).
Enrico
-------------- next part --------------
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.11 (enrico at enrico-kubuntu) (gcc version 4.7.2 (GCC) ) #2 SMP PREEMPT Sun Oct 14 01:42:30 CEST 2012
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: OMAP4 Panda board
[ 0.000000] cma: CMA: reserved 8 MiB at 98800000
[ 0.000000] cma: CMA: reserved 112 MiB at 99000000
[ 0.000000] cma: CMA: reserved 32 MiB at ad800000
[ 0.000000] cma: CMA: reserved 16 MiB at ac000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] omap2_set_globals_tap
[ 0.000000] OMAP4: Map 0xad600000 to 0xfe600000 for dram barrier
[ 0.000000] omap2_set_globals_tap
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1328000 s11712 r8192 d12864 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259584
[ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 726MB 296MB = 1022MB total
[ 0.000000] Memory: 851616k/851616k available, 196960k reserved, 270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc088de20 (8728 kB)
[ 0.000000] .init : 0xc088e000 - 0xc08f0dc0 ( 396 kB)
[ 0.000000] .data : 0xc08f2000 - 0xc0975d68 ( 528 kB)
[ 0.000000] .bss : 0xc0975d8c - 0xc0b1e704 (1699 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:538
[ 0.000000] omap_sr_disable: omap_sr struct for sr_wakeup not found
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000183] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488)
[ 0.070373] pid_max: default: 32768 minimum: 301
[ 0.070648] Security Framework initialized
[ 0.070678] AppArmor: AppArmor initialized
[ 0.070983] Mount-cache hash table entries: 512
[ 0.072479] Initializing cgroup subsys cpuacct
[ 0.072509] Initializing cgroup subsys memory
[ 0.072570] Initializing cgroup subsys devices
[ 0.072570] Initializing cgroup subsys freezer
[ 0.072601] Initializing cgroup subsys net_cls
[ 0.072631] Initializing cgroup subsys blkio
[ 0.072662] Initializing cgroup subsys perf_event
[ 0.072814] CPU: Testing write buffer coherency: ok
[ 0.072906] ftrace: allocating 23312 entries in 69 pages
[ 0.142211] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.142486] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.142608] Setting up static identity map for 0x805c11c8 - 0x805c1220
[ 0.142639] L310 cache controller enabled
[ 0.142639] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
[ 0.142669] omap_sar_ram_init
[ 0.142944] generating sar_ram layout...
[ 0.143096] sar ram layout created
[ 0.220977] CPU1: Booted secondary processor
[ 0.290924] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.290985] CPU1: Unknown IPI message 0x1
[ 0.291015] Brought up 2 CPUs
[ 0.291015] SMP: Total of 2 processors activated (2792.83 BogoMIPS).
[ 0.291992] devtmpfs: initialized
[ 0.297698] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297760] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297790] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297821] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297851] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297882] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297912] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.297943] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297973] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298004] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.298034] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298095] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.298156] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298187] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298217] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298278] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298309] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298370] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298400] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299285] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.299316] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.299468] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.299499] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.299560] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.302276] omap_hwmod: mcpdm: _wait_target_ready error: -16
[ 0.302276] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.302307] omap_hwmod: mcpdm: cannot be enabled (3)
[ 0.302612] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.302642] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.302673] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.302734] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.303955] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.304504] dummy:
[ 0.313415] NET: Registered protocol family 16
[ 0.316986] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.317291] GPMC revision 6.0
[ 0.319183] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.319274] OMAP GPIO hardware version 0.1
[ 0.319458] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.319732] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.320007] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.320251] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[ 0.320526] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[ 0.321594] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.322692] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.324493] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts
[ 0.324523] omap_hwmod_mux_init: Could not allocate device mux entry
[ 0.328277] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.328308] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.331176] Updated GPU clock source to be dpll_per_m7x2_ck
[ 0.333038] omap-mcbsp.1: alias pad_fck already exists
[ 0.333251] omap-mcbsp.2: alias pad_fck already exists
[ 0.333465] omap-mcbsp.3: alias pad_fck already exists
[ 0.333679] omap-mcbsp.4: alias pad_fck already exists
[ 0.333862] omap4plus_scm.0: alias fck already exists
[ 0.334716] OMAP DMA hardware revision 0.0
[ 0.335235] emif emif.1: Device configured with addr = f0e00000 and IRQ142
[ 0.335510] emif emif.2: Device configured with addr = f1000000 and IRQ143
[ 0.343566] bio: create slab <bio-0> at 0
[ 0.344360] vwl1271: 1800 mV
[ 0.344543] vhub: 3300 mV
[ 0.344757] hsusb0: 3300 mV
[ 0.344757] hsusb0: supplied by vhub
[ 0.346710] SCSI subsystem initialized
[ 0.347076] omap2_mcspi omap2_mcspi.1: master is unqueued, this is deprecated
[ 0.347412] omap2_mcspi omap2_mcspi.2: master is unqueued, this is deprecated
[ 0.347717] omap2_mcspi omap2_mcspi.3: master is unqueued, this is deprecated
[ 0.348022] omap2_mcspi omap2_mcspi.4: master is unqueued, this is deprecated
[ 0.348358] usbcore: registered new interface driver usbfs
[ 0.348449] usbcore: registered new interface driver hub
[ 0.348602] usbcore: registered new device driver usb
[ 0.349090] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
[ 0.349609] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 0.350189] twl 1-0048: PIH (irq 39) chaining IRQs 416..436
[ 0.350677] VUSB: 3300 mV normal standby
[ 0.353851] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[ 0.354675] V1V8: 1800 mV normal standby
[ 0.355041] V2V1: 2100 mV normal standby
[ 0.355682] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
[ 0.356689] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[ 0.357452] VCXIO: 1800 mV normal standby
[ 0.357482] VCXIO: supplied by V2V1
[ 0.358459] VDAC: 1800 mV normal standby
[ 0.358489] VDAC: supplied by V2V1
[ 0.359344] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[ 0.359985] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
[ 0.360778] CLK32KG:
[ 0.361053] VANA: 2100 mV normal standby
[ 0.361450] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
[ 0.361724] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
[ 0.362091] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
[ 0.362365] Linux media interface: v0.10
[ 0.362426] Linux video capture interface: v2.00
[ 0.362915] omap-iommu omap-iommu.0: dsp registered
[ 0.362976] omap-iommu omap-iommu.1: ipu registered
[ 0.363159] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.363739] NetLabel: Initializing
[ 0.363739] NetLabel: domain hash size = 128
[ 0.363769] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.363830] NetLabel: unlabeled traffic allowed by default
[ 0.364379] Switching to clocksource 32k_counter
[ 0.384429] FS-Cache: Loaded
[ 0.384643] AppArmor: AppArmor Filesystem Enabled
[ 0.398590] NET: Registered protocol family 2
[ 0.398895] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.399566] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.401733] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.403350] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.403350] TCP: reno registered
[ 0.403381] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.403411] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.403839] NET: Registered protocol family 1
[ 0.403991] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2
[ 0.755706] omap-rproc.1: alias fck already exists
[ 0.756530] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.756652] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.756744] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.756835] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.757934] audit: initializing netlink socket (disabled)
[ 0.757995] type=2000 audit(0.718:1): initialized
[ 0.866363] highmem bounce pool size: 64 pages
[ 0.873992] VFS: Disk quotas dquot_6.5.2
[ 0.874359] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.877777] fuse init (API version 7.18)
[ 0.878204] msgmni has been set to 1471
[ 0.880126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.880279] io scheduler noop registered
[ 0.880310] io scheduler deadline registered
[ 0.880340] io scheduler cfq registered (default)
[ 0.881164] OMAP DSS rev 4.0
[ 0.910400] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.911773] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 0.912200] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.912628] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 2.098022] console [ttyO2] enabled
[ 2.102172] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 2.110534] [drm] Initialized drm 1.1.0 20060810
[ 2.124542] brd: module loaded
[ 2.132110] loop: module loaded
[ 2.135559] (stk) :sysfs entries created
[ 2.139801] (stk) : debugfs entries created
[ 2.149658] Fixed MDIO Bus: probed
[ 2.153533] tun: Universal TUN/TAP device driver, 1.6
[ 2.158905] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 2.165954] PPP generic driver version 2.4.2
[ 2.170837] usbcore: registered new interface driver smsc95xx
[ 2.177276] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.325042] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.331359] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.340179] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[ 2.356658] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.362976] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.370269] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.377990] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.383666] usb usb1: Manufacturer: Linux 3.4.11 ehci_hcd
[ 2.389465] usb usb1: SerialNumber: ehci-omap.0
[ 2.394989] hub 1-0:1.0: USB hub found
[ 2.399047] hub 1-0:1.0: 3 ports detected
[ 2.434814] Initializing USB Mass Storage driver...
[ 2.440124] usbcore: registered new interface driver usb-storage
[ 2.446563] USB Mass Storage support registered.
[ 2.451629] usbcore: registered new interface driver libusual
[ 2.457763] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.666046] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
[ 2.675231] mousedev: PS/2 mouse device common for all mice
[ 2.682312] twl_rtc twl_rtc: Power up reset detected.
[ 2.688751] twl_rtc twl_rtc: Enabling TWL-RTC
[ 2.696777] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 2.703552] i2c /dev entries driver
[ 2.709320] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 2.717224] device-mapper: uevent: version 1.0.3
[ 2.722503] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
[ 2.731597] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 2.741394] omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator
[ 2.858612] omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator
[ 2.888336] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 2.895416] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.903778] hub 1-1:1.0: USB hub found
[ 2.907928] hub 1-1:1.0: 5 ports detected
[ 2.975402] thermal_governor_dev_register:Adding omap_ongpu_governor governor
[ 2.983062] thermal_get_slope:Getting slope is not supported for domain gpu
[ 2.990539] thermal_get_offset:Getting offset is not supported for domain gpu
[ 2.998504] stm_fw: vendor driver stm_ti1.0 registered
[ 3.006469] omap_pcm_dummy() init
[ 3.010375] OMAP4/5 SoC init
[ 3.013519] omap_pcm_dummy() init
[ 3.017120] omap_mcpdm_dummy() init
[ 3.025360] aess aess: ABE Firmware version 9560
[ 3.032775] omap_sr_disable: omap_sr struct for sr_iva not found
[ 3.068511] omap_sr_disable: omap_sr struct for sr_iva not found
[ 3.079254] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[ 3.087188] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[ 3.096557] asoc: snd-soc-dummy-dai <-> Voice mapping ok
[ 3.104217] asoc: snd-soc-dummy-dai <-> Tones mapping ok
[ 3.111602] asoc: snd-soc-dummy-dai <-> Vibra mapping ok
[ 3.117828] asoc: snd-soc-dummy-dai <-> MODEM mapping ok
[ 3.124145] asoc: snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok
[ 3.131134] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
[ 3.140686] asoc: twl6040-legacy <-> mcpdm-legacy mapping ok
[ 3.147613] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[ 3.153472] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[ 3.159362] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[ 3.164855] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 3.173797] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[ 3.179595] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok
[ 3.186004] mmc0: new high speed SDHC card at address e624
[ 3.192291] mmcblk0: mmc0:e624 SD08G 7.40 GiB
[ 3.192504] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok
[ 3.192871] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
[ 3.193176] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
[ 3.194427] input: PandaES Headset Jack as /devices/platform/omap-abe-twl6040/sound/card0/input0
[ 3.216308] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[ 3.233581] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok
[ 3.240447] mmcblk0: p1 p2
[ 3.241333] u32 classifier
[ 3.241363] Actions configured
[ 3.241729] TCP: cubic registered
[ 3.242279] NET: Registered protocol family 10
[ 3.243072] NET: Registered protocol family 17
[ 3.243255] lib80211: common routines for IEEE802.11 drivers
[ 3.243438] Registering the dns_resolver key type
[ 3.273681] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 3.281951] ThumbEE CPU extension supported.
[ 3.286529] Registering SWP/SWPB emulation handler
[ 3.296691] omap_sr_disable: omap_sr struct for sr_mpu not found
[ 3.303405] omap_sr_disable: omap_sr struct for sr_core not found
[ 3.310485] Power Management for TI OMAP4XX/OMAP5XXX devices.
[ 3.316741] hwmod gpmc not found
[ 3.320281] sr_init: No PMIC hook to init smartreflex
[ 3.325805] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[ 3.334075] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[ 3.342559] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
[ 3.350799] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.358276] SmartReflex class 1.5 driver: initialized (86400000ms)
[ 3.364868] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.377227] clock: disabling unused clocks to save power
[ 3.383758] registered taskstats version 1
[ 3.388305] smsc95xx v1.0.4
[ 3.391296] do_calibrate: mpu: Calibration complete: Voltage Nominal=1380000Calib=1210000 margin=0
[ 3.401184] do_calibrate: iva: Calibration complete: Voltage Nominal=1140000Calib=974860 margin=0
[ 3.410858] do_calibrate: core: Calibration complete: Voltage Nominal=1127000Calib=1038160 margin=13000
[ 3.422546] VANA: incomplete constraints, leaving on
[ 3.428924] VDAC: incomplete constraints, leaving on
[ 3.434844] VUSB: incomplete constraints, leaving on
[ 3.440917] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.454833] dmm dmm: initialized all PAT entries
[ 3.501831] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 2e:60:29:85:46:01
[ 3.518524] mmc1: card claims to support voltages below the defined range. These will be ignored.
[ 3.525360] [drm] Enabling DMM ywrap scrolling
[ 3.542358] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 3.543334] mmc1: new SDIO card at address 0001
[ 3.575683] Console: switching to colour frame buffer device 240x67
[ 3.614807] fb0: omapdrm frame buffer device
[ 3.619293] drm: registered panic notifier
[ 3.623596] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.630554] [drm] No driver support for vblank timestamp query.
[ 3.636779] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0
[ 3.643188] ALSA device list:
[ 3.646362] #0: PandaES
[ 3.649108] #1: OMAPHDMI
[ 3.672424] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.680999] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 3.697906] devtmpfs: mounted
[ 3.701293] Freeing init memory: 392K
[ 3.705505] Write protecting the kernel text section c0008000 - c0809000
[ 4.419250] systemd[1]: systemd 189 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ; angstrom)
Welcome to The Ångström Distribution!
[ 4.534912] systemd[1]: Inserted module 'autofs4'
[ 4.541381] systemd[1]: Set hostname to <pandaboard>.
[ 4.706848] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 4.729522] systemd[1]: Found ordering cycle on basic.target/start
[ 4.736053] systemd[1]: Walked on cycle path to sockets.target/start
[ 4.742736] systemd[1]: Walked on cycle path to dbus.socket/start
[ 4.749145] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.755859] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.762908] systemd[1]: Walked on cycle path to basic.target/start
[ 4.769409] systemd[1]: Breaking ordering cycle by deleting job dbus.socket/start
[ 4.777282] systemd[1]: Found ordering cycle on basic.target/start
[ 4.783782] systemd[1]: Walked on cycle path to sockets.target/start
[ 4.790588] systemd[1]: Walked on cycle path to dropbear.socket/start
[ 4.797363] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.804107] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.811157] systemd[1]: Walked on cycle path to basic.target/start
[ 4.817657] systemd[1]: Breaking ordering cycle by deleting job dropbear.socket/start
[ 4.825897] systemd[1]: Found ordering cycle on basic.target/start
[ 4.832397] systemd[1]: Walked on cycle path to sockets.target/start
[ 4.839080] systemd[1]: Walked on cycle path to avahi-daemon.socket/start
[ 4.846221] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.852905] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.859954] systemd[1]: Walked on cycle path to basic.target/start
[ 4.866455] systemd[1]: Breaking ordering cycle by deleting job avahi-daemon.socket/start
[ 4.875061] systemd[1]: Found ordering cycle on basic.target/start
[ 4.881652] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.888366] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.895385] systemd[1]: Walked on cycle path to basic.target/start
[ 4.901916] systemd[1]: Breaking ordering cycle by deleting job alsa-state.service/start
Expecting device dev-ttyO2.device...
[ OK ] Reached target Remote File Systems.
[ OK ] Listening on Syslog Socket.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Reached target Swap.
[ OK ] Listening on Journal Socket.
Starting LSB: The RPC portmapper...
[ OK ] Reached target Syslog.
[ OK ] Reached target Sockets.
Starting File System Check on Root Device...
Starting Load Kernel Modules...
Starting udev Kernel Device Manager...
Mounting Debug File System...
Starting Journal Service...
[ OK ] Started Journal Service.
Starting Apply Kernel Variables...
Starting udev Coldplug all Devices...
Mounting POSIX Message Queue File System...
[ OK ] Started LSB: The RPC portmapper.
[ OK ] Reached target RPC Port Mapper.
[ OK ] Mounted POSIX Message Queue F[ 5.354888] systemd-udevd[91]: starting version 189
ile System.
[ OK ] Mounted Debug File System.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started udev Kernel Device Manager.
[ 5.500183] Bluetooth: Core ver 2.16
[ 5.504119] NET: Registered protocol family 31
[ 5.508911] Bluetooth: HCI device and connection manager initialized
[ 5.516357] Bluetooth: HCI socket layer initialized
[ 5.523223] Bluetooth: L2CAP socket layer initialized
[ 5.528625] Bluetooth: SCO socket layer initialized
[ 5.566162] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ OK ] Started udev Coldplug all Devices.
[ 5.586212] systemd-journald[93]: Fixed max_use=50.0M max_size=6.2M min_size=64.0K keep_free=25.0M
[ 5.596649] systemd-journald[93]: Reserving 11384 entries in hash table.
[ 5.607116] systemd-journald[93]: Vacuuming...
[ 5.828857] NET: Registered protocol family 23
[ 5.890350] IrCOMM protocol (Dag Brattli)
systemd-fsck[87]: GEEXBOX: clean, 24090/481440 files, 639951/1923840 blocks
[ 5.993164] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 6.058441] Bluetooth: RFCOMM TTY layer initialized
[ 6.063903] Bluetooth: RFCOMM socket layer initialized
[ 6.069396] Bluetooth: RFCOMM ver 1.11
[ OK ] Started File System Check on Root Device.
[ OK ] Started Load Kernel Modules.
Mounting FUSE Control File System...
Starting Remount Root and Kernel File Systems...
[ OK ] Mounted FUSE Control File System.
[ OK ] Reached target Sound Card.
[ OK ] Found device /dev/ttyO2.
[ 6.469757] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Reached target Local File Systems (Pre).
Mounting /tmp...
Starting Load Random Seed...
[ OK ] Mounted /tmp.
[ OK ] Reached target Local File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting Recreate Volatile Files and Directories...
[ OK ] Started Load Random Seed.
[ OK ] Started Recreate Volatile Files and Directories.
[ OK ] Reached target System Initialization.
Starting Restore Sound Card State...
[ OK ] Reached target Basic System.
Starting LSB: Advanced Power Management daemon...
Starting Timestamping service...
[ OK ] Started Timestamping service.
Starting Kernel Logging Service...
[ OK ] Started Kernel Logging Service.
Starting System Logging Service...
[ OK ] Started System Logging Service.
Starting Enrico service...
[ 7.054748] cfg80211: Calling CRDA to update world regulatory domain
[ OK ] Started Restore Sound Card State.
[ OK ] Started LSB: Advanced Power Management daemon.
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
Starting Permit User Sessions...
[ OK ] Started Permit User Sessions.
Starting Serial Getty on ttyO2...
OK ] Started Serial Getty on ttyO2.
[ 7.732177] systemd-journald[93]: Received SIGUSR1
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ 7.842926] systemd-journald[93]: Fixed max_use=739.6M max_size=92.4M min_size=64.0K keep_free=369.8M
[ 7.902801] systemd-journald[93]: Flushing to /var...
.---O---.
| | .-. o o
| | |-----.-----.-----.| | .----..-----.-----.
| | | __ | ---'| '--.| .-'| | |
| | | | | |--- || --'| | | ' | | | |
'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
-' |
'---'
The Angstrom Distribution pandaboard ttyO2
Angstrom v2012.09 - Kernel 3.4.11
pandaboard login:
More information about the meta-ti
mailing list