[meta-intel] GPIO functionality for Intel E3845 CPU (valley-island, bay-trail)

[Henrik Haugaard Jensen]

Thanks,
I tried the PINCTRL configs, but /sys/class/gpio/ and /sys/kernel/debug/gpio does still not get populated.

A bit of printk debugging show that ”byt_gpio_init” is called but “byt_pinctrl_probe” is not.

Any ideas?

Regards,
Henrik

From: Tan, Jui Nee <jui.nee.tan at intel.com>
Sent: Wednesday, 17 October 2018 03.11
To: Henrik Haugaard Jensen <hhj at trackman.com>; meta-intel at yoctoproject.org
Subject: RE: [meta-intel] GPIO functionality for Intel E3845 CPU (valley-island, bay-trail)

You should be able to see the gpiochips available in /sys/class/gpio/gpiochip* and “byt_gpio_init” is also being called with the following kernel configurations enabled:

CONFIG_PINCTRL=y
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_INTEL=y

Thanks,
Juinee

From: meta-intel-bounces at yoctoproject.org<mailto:meta-intel-bounces at yoctoproject.org> [mailto:meta-intel-bounces at yoctoproject.org] On Behalf Of Henrik Haugaard Jensen
Sent: Wednesday, October 10, 2018 10:28 PM
To: meta-intel at yoctoproject.org<mailto:meta-intel at yoctoproject.org>
Subject: [meta-intel] GPIO functionality for Intel E3845 CPU (valley-island, bay-trail)

We have successfully used meta-intel jethro branch for our device based on an intel E3845 CPU.

Now we need to upgrade to a newer Linux kernel to get full camera/video/media support. But when building new BSP with sumo or rocko branches it turn out that pinctrl/GPIO system is not working neither with linux-intel 4.9 or 4.14.

Baytrail pin-controller support and GPIO support seems to be configured for the kernel out of the box, but after booting “/sys/kernel/debug/gpio” is empty and the pin-controller gpio-chip’s is not showing in “/sys/class/gpio”.

Doing initcall debugging shows that “bxt_pinctrl_init” (Broxton ) is called and not “byt_gpio_init” (Baytrail) - I have tried, but not been able, to find out why.

I have tried both vanilla meta-intel sumo BSP and  “ROCKO 2.4 – BAY TRAIL BSP” (meta-intel branch 8.1-rocko-2.4.2) – what is going wrong?

Also I have the impression that since linux 4.8 the “/sys/class/gpio” user interface is obsolete and apparently replaced by /dev/gpioxxx pin devices and a new gpiolib userspace tool for this has been provided. Has this new GPIO interface made its way into meta-intel?

Regards,
Henrik Haugaard Jensen
TrackMan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-intel/attachments/20181017/dc62620e/attachment.html>