[meta-intel] Apollo Lake Yocto BSP

[Mohammad, Jamal M]

Thanks both of you.. I am now trying the intel website link.. I tried the default master branch of meta-intel with master branch of poky.. Core-image-minimal target was working fine.. But when I booted using core-image-sato target, Yocto Splash screen was displayed and the screen went blank.. What does this mean...

-----Original Message-----
From: Tan, Jui Nee [mailto:jui.nee.tan at intel.com] 
Sent: Friday, March 23, 2018 8:17 AM
To: Stephano Cetola <stephano.cetola at linux.intel.com>; Mohammad, Jamal M <MohammadJamal.Mohiuddin at ncr.com>
Cc: meta-intel at yoctoproject.org
Subject: RE: [meta-intel] Apollo Lake Yocto BSP

Hi,



Alternatively, you can refer to this link: https://urldefense.proofpoint.com/v2/url?u=https-3A__www.yoctoproject.org_bsps_jethro203-2Dleaf-2Dhill_&d=DwIGaQ&c=gJN2jf8AyP5Q6Np0yWY19w&r=4h__2a8-7N65qoDnmtsyGh_QYq3kPCn-Loy2L0LHnCs&m=MdWAB4reZSNS7PHk74O08IadCyL8SMfJ6BHORLUNf-A&s=ETjROtUwhwzvGw3-iARW7k4XX01FFTdRd_v9ixkaGJY&e= to get Apollo Lake-i Yocto Project BSP and build the image.



Thanks,

Juinee



> -----Original Message-----

> From: meta-intel-bounces at yoctoproject.org [mailto:meta-intel-

> bounces at yoctoproject.org] On Behalf Of Stephano Cetola

> Sent: Friday, March 23, 2018 1:48 AM

> To: Mohammad, Jamal M <MohammadJamal.Mohiuddin at ncr.com>

> Cc: meta-intel at yoctoproject.org

> Subject: Re: [meta-intel] Apollo Lake Yocto BSP

> 

> On 3/21/18 9:58 PM, Mohammad, Jamal M wrote:

> > Does it mean, I cannot use the default meta-intel layer and have to

> follow the Intel document.

> >

> > -----Original Message-----

> > From: Anuj Mittal [mailto:anuj.mittal at intel.com]

> > Sent: Wednesday, March 21, 2018 9:12 AM

> > To: Mohammad, Jamal M <MohammadJamal.Mohiuddin at ncr.com>; meta-

> intel at yoctoproject.org

> > Subject: Re: [meta-intel] Apollo Lake Yocto BSP

> >

> > On 03/19/2018 07:03 PM, Mohammad, Jamal M wrote:

> >> Hi Guys,

> >>

> >> We have Apollo Lake based board. And want to install Yocto Image. Does

> >> the meta-intel master branch has BSP Support for Apollo Lake.

> >>

> >>            git clone git://git.yoctoproject.org/meta-intel

> >>

> >> If not where can I find the BSP Support Layer for Apollo Lake. If yes

> >> what branch of poky should I use.

> >>

> >

> > You can refer to the BSP documentation here:

> >

> > https://urldefense.proofpoint.com/v2/url?u=https-

> 3A__www.intel.com_content_www_us_en_embedded_products_apollo-

> 2Dlake_technical-2Dlibrary.html&d=DwID-

> g&c=gJN2jf8AyP5Q6Np0yWY19w&r=4h__2a8-7N65qoDnmtsyGh_QYq3kPCn-

> Loy2L0LHnCs&m=4i-KLG-O9Nw8nR9XSeNEt-

> mY_ykTyzcI8FObTaCjC1k&s=oYpdE6x9YRj3mGzMPnMQ0e1soX035puKW8MxA_6W4nc&e=

> >

> > Thanks,

> >

> > Anuj

> >

> 

> You are welcome to build your own BSP using the meta-intel layer, as it

> has support for Apollo Lake SoC's. The BSP is intended to make support

> easier when working with your corporate representative.

> 

> The published BSPs are also a good reference guide for building your own

> BSP as they will enable many features that may not be enabled by default

> in meta-intel.

> 

> Cheers,

> Stephano

> --

> _______________________________________________

> meta-intel mailing list

> meta-intel at yoctoproject.org

> https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.yoctoproject.org_listinfo_meta-2Dintel&d=DwIGaQ&c=gJN2jf8AyP5Q6Np0yWY19w&r=4h__2a8-7N65qoDnmtsyGh_QYq3kPCn-Loy2L0LHnCs&m=MdWAB4reZSNS7PHk74O08IadCyL8SMfJ6BHORLUNf-A&s=kqZqbjJUqSN2bU9SJh38GQ3Zn9eeL6uCkpTj_qnzpZE&e=