[meta-intel] Apollo Lake Yocto BSP

[Stephano Cetola]

On 3/21/18 9:58 PM, Mohammad, Jamal M wrote:
> Does it mean, I cannot use the default meta-intel layer and have to follow the Intel document.
> 
> -----Original Message-----
> From: Anuj Mittal [mailto:anuj.mittal at intel.com] 
> Sent: Wednesday, March 21, 2018 9:12 AM
> To: Mohammad, Jamal M <MohammadJamal.Mohiuddin at ncr.com>; meta-intel at yoctoproject.org
> Subject: Re: [meta-intel] Apollo Lake Yocto BSP
> 
> On 03/19/2018 07:03 PM, Mohammad, Jamal M wrote:
>> Hi Guys,
>>
>> We have Apollo Lake based board. And want to install Yocto Image. Does 
>> the meta-intel master branch has BSP Support for Apollo Lake.
>>
>>            git clone git://git.yoctoproject.org/meta-intel
>>
>> If not where can I find the BSP Support Layer for Apollo Lake. If yes 
>> what branch of poky should I use.
>>
> 
> You can refer to the BSP documentation here:
> 
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.intel.com_content_www_us_en_embedded_products_apollo-2Dlake_technical-2Dlibrary.html&d=DwID-g&c=gJN2jf8AyP5Q6Np0yWY19w&r=4h__2a8-7N65qoDnmtsyGh_QYq3kPCn-Loy2L0LHnCs&m=4i-KLG-O9Nw8nR9XSeNEt-mY_ykTyzcI8FObTaCjC1k&s=oYpdE6x9YRj3mGzMPnMQ0e1soX035puKW8MxA_6W4nc&e=
> 
> Thanks,
> 
> Anuj
> 

You are welcome to build your own BSP using the meta-intel layer, as it
has support for Apollo Lake SoC's. The BSP is intended to make support
easier when working with your corporate representative.

The published BSPs are also a good reference guide for building your own
BSP as they will enable many features that may not be enabled by default
in meta-intel.

Cheers,
Stephano