[meta-intel] [PATCH] README: Updated for Quark X1000
Kinsella, Ray
ray.kinsella at intel.com
Fri Nov 13 15:09:19 PST 2015
Added instructions on how to build/install for the Quark X1000.
Signed-off-by: Ray Kinsella <ray.kinsella at intel.com>
---
README | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/README b/README
index 75dc30e..6d22dfc 100644
--- a/README
+++ b/README
@@ -111,6 +111,34 @@ To make these features available for your machine, you will need to:
Once the above requirements are met, the machine features provided by
the meta-intel layer will be available for the BSP to use.
+Building for Intel Quark X1000 microprocessor
+---------------------------------------------
+
+To target the Intel Quark X1000.
+
+ 1. In conf/local.conf set the MACHINE type to be intel-quark.
+
+ MACHINE ??= "intel-quark"
+
+ 2. Build a target image of your choice.
+
+ $ bitbake core-image-minimal
+
+ 3. Use the provided wic script to create an SD card image.
+
+ $ wic list images
+ mkgalileodisk Create an Galileo Gen 1/2 disk image
+ mkgummidisk Create an EFI disk image
+ ...
+
+ $ wic create mkgalileodisk -e core-image-minimal
+
+ 4. Write the output image to an SD Card
+
+ $ sudo dd if=~/mkgalileodisk-*-mmcblk0.direct of=/dev/mmcblk0
+
+ 5. Insert the SD Card into the reference platform and power on.
+
Available machine features
--------------------------
--
1.7.10.4
More information about the meta-intel
mailing list