[meta-intel] How to support the NUC Kit DE3815TYKHE?

[LIYONG]

I am using the latest bios 0041, if using grub, it can load and boot the kernel, but cannot pass the command line. The os is 64bit, both the grub and the kernel are built using the same conf

On Mar 31, 2015 12:35 AM, Darren Hart <dvhart at linux.intel.com> wrote:
No, it should work both grub and gummiboot. Are you perhaps mismatching
firmware and OS 32b and 64b?
--
Darren Hart
Intel Open Source Technology Center

From:  LIYONG <sdliyong at gmail.com>
Date:  Saturday, March 28, 2015 at 7:55 AM
To:  Darren Hart <dvhart at linux.intel.com>
Cc:  <meta-intel at yoctoproject.org>, YONG LI <sdliyong at gmail.com>
Subject:  Re: [meta-intel] How to support the NUC Kit DE3815TYKHE?

> Thanks for your mail! I just found the root cause. The kernel is OK, but the
> grub efi has problems. It cannot pass the kernel command to the kernel. I have
> to switch to gummiboot. Is it a known issue ?
>
> On Mar 28, 2015 6:32 AM, Darren Hart <dvhart at linux.intel.com> wrote:
>
> On 3/26/15 7:41 AM, Yong Li wrote:
>> > Hi All,
>> >
>> >
>> >
>> > I am testing the NUC DE3815TYKHE, Ubuntu 1404 is okay. But the yocto
>> > build image does not work. I tested the intel-corei7-64 and
>> > valleyisland-64, the kernel cannot boot,
>> >
>> > it seems that it cannot load the /dev/sda2. Does Yocto + meta-intel
>> > supports this NUC?
>
> It does and I've booted that board in the past. If you can provide a
> detailed report of what you are doing, which image you're building,
> which version, how you're deploying it, etc., we may be able to help.
>
> --
> Darren Hart
> Intel Open Source Technology Center


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-intel/attachments/20150331/5c8f29aa/attachment.html>