[meta-intel] How to support the NUC Kit DE3815TYKHE?
Darren Hart
dvhart at linux.intel.com
Wed Apr 1 14:16:48 PDT 2015
Which image are you building?
What happens when you boot? (please provide an exact error message or
complete dmesg)
On 3/31/15 7:29 PM, Yong Li wrote:
> Thanks Darren! Below is the grub.cfg:
> # Automatically created by OE
> serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1
> default=boot
> timeout=10
>
> menuentry 'boot'{
> linux /vmlinuz root=/dev/sda2 ro rootwait quiet console=ttyS0,115200
> console=tty0
> }
>
> I use this command to create the USB disk:
>
> scripts/contrib/mkefidisk.sh -v /dev/sdc os.hddimg /dev/sda
>
> By the way, I found the ISO image is okay(dd the ISO to usb disk), in
> the ISO, there is initrd in the grub.cfg file, so I think the root cause
> is the grub cannot boot without initrd. Did you test the hddimg +
> mkefidisk.sh ?
>
>
> 2015-04-01 0:18 GMT+08:00 Darren Hart <dvhart at linux.intel.com
> <mailto:dvhart at linux.intel.com>>:
>
> You'll need to provide more detail for us to help. Exactly how is it
> failing. Probably a good idea to share your grub.conf.
> --
> Darren Hart
> Intel Open Source Technology Center
>
> From: LIYONG <sdliyong at gmail.com <mailto:sdliyong at gmail.com>>
> Date: Tuesday, March 31, 2015 at 7:21 AM
> To: Darren Hart <dvhart at linux.intel.com <mailto:dvhart at linux.intel.com>>
> Cc: YONG LI <sdliyong at gmail.com <mailto:sdliyong at gmail.com>>,
> <meta-intel at yoctoproject.org <mailto:meta-intel at yoctoproject.org>>
>
> Subject: Re: [meta-intel] How to support the NUC Kit DE3815TYKHE?
>
> I am using the latest bios 0041, if using grub, it can load and
> boot the kernel, but cannot pass the command line. The os is
> 64bit, both the grub and the kernel are built using the same conf
>
> On Mar 31, 2015 12:35 AM, Darren Hart <dvhart at linux.intel.com
> <mailto:dvhart at linux.intel.com>> wrote:
> No, it should work both grub and gummiboot. Are you perhaps
> mismatching firmware and OS 32b and 64b?
> --
> Darren Hart
> Intel Open Source Technology Center
>
> From: LIYONG <sdliyong at gmail.com <mailto:sdliyong at gmail.com>>
> Date: Saturday, March 28, 2015 at 7:55 AM
> To: Darren Hart <dvhart at linux.intel.com
> <mailto:dvhart at linux.intel.com>>
> Cc: <meta-intel at yoctoproject.org
> <mailto:meta-intel at yoctoproject.org>>, YONG LI
> <sdliyong at gmail.com <mailto:sdliyong at gmail.com>>
> Subject: Re: [meta-intel] How to support the NUC Kit DE3815TYKHE?
>
> Thanks for your mail! I just found the root cause. The
> kernel is OK, but the grub efi has problems. It cannot pass
> the kernel command to the kernel. I have to switch to
> gummiboot. Is it a known issue ?
>
> On Mar 28, 2015 6:32 AM, Darren Hart <dvhart at linux.intel.com
> <mailto:dvhart at linux.intel.com>> wrote:
>
> On 3/26/15 7:41 AM, Yong Li wrote:
> > Hi All,
> >
> >
> >
> > I am testing the NUC DE3815TYKHE, Ubuntu 1404 is okay. But the yocto
> > build image does not work. I tested the intel-corei7-64 and
> > valleyisland-64, the kernel cannot boot,
> >
> > it seems that it cannot load the /dev/sda2. Does Yocto + meta-intel
> > supports this NUC?
>
> It does and I've booted that board in the past. If you can
> provide a
> detailed report of what you are doing, which image you're
> building,
> which version, how you're deploying it, etc., we may be able
> to help.
>
> --
> Darren Hart
> Intel Open Source Technology Center
>
> -- _______________________________________________ meta-intel
> mailing list meta-intel at yoctoproject.org
> <mailto:meta-intel at yoctoproject.org>
> https://lists.yoctoproject.org/listinfo/meta-intel
>
>
--
Darren Hart
Intel Open Source Technology Center
More information about the meta-intel
mailing list