[meta-intel] [PATCH 3/5] Remove fri2 machine support
nitin.a.kamble at intel.com
nitin.a.kamble at intel.com
Fri Sep 5 19:46:12 PDT 2014
From: Nitin A Kamble <nitin.a.kamble at intel.com>
The fri2 machine has been retired with this commit. This does not affect
the fri2-noemgd machine and it is supported as usual.
Signed-off-by: Nitin A Kamble <nitin.a.kamble at intel.com>
---
meta-fri2/README | 51 +--
meta-fri2/conf/machine/fri2.conf | 47 ---
.../alsa-state/alsa-state/fri2/asound.state | 411 ---------------------
.../formfactor/formfactor/fri2/machconfig | 3 -
.../init-ifupdown/files/fri2/interfaces | 9 -
.../xserver-xf86-config/fri2/xorg.conf | 60 ---
.../xorg-xserver/xserver-xf86-config_0.1.bbappend | 1 -
.../linux/linux-yocto-rt_3.10.bbappend | 7 -
.../linux/linux-yocto-tiny_3.10.bbappend | 8 -
.../recipes-kernel/linux/linux-yocto_3.10.bbappend | 11 -
10 files changed, 6 insertions(+), 602 deletions(-)
delete mode 100644 meta-fri2/conf/machine/fri2.conf
delete mode 100644 meta-fri2/recipes-bsp/alsa-state/alsa-state/fri2/asound.state
delete mode 100644 meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig
delete mode 100644 meta-fri2/recipes-core/init-ifupdown/files/fri2/interfaces
delete mode 100644 meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf
delete mode 100644 meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
diff --git a/meta-fri2/README b/meta-fri2/README
index d5ac667..6e90c33 100644
--- a/meta-fri2/README
+++ b/meta-fri2/README
@@ -12,9 +12,6 @@ Intel EG20T Platform Controller Hub (Tunnel Creek + Topcliff). The Fish River
Island II includes a variety of communications options and other
machine-to-machine (m2m) capabilities.
-It also supports the E6xx embedded on-chip graphics via the Intel
-Embedded Media and Graphics Driver (EMGD).
-
Information on all Intel embedded platforms can be found here:
http://www.intel.com/p/en_US/embedded/hwsw/hardware
@@ -96,33 +93,12 @@ bblayers.conf, e.g.:
yocto/meta-intel \
yocto/meta-intel/meta-fri2 \
-The meta-fri2 layer contains support for two different machine
-configurations. These configurations are identical except for the fact
-that the one prefixed with 'fri2' makes use of the Intel-proprietary
-EMGD graphics driver, while the one prefixed with 'fri2-noemgd'
-does not.
-
-If you want to enable the layer that supports EMGD graphics add the
-following to the local.conf file:
-
- MACHINE ?= "fri2"
-
-The 'fri2' machine includes the emgd-driver-bin package, which has a
-proprietary license that must be whitelisted by adding the string
-"license_emgd-driver-bin" to the LICENSE_FLAGS_WHITELIST variable in
-your local.conf. For example:
-
- LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin"
-
-The emgd recipe depends on Xorg's dri and glx modules, which are built
-only when 'opengl' is listed in DISTRO_FEATURES. So if the distro
-doesn't list 'opengl' in the DISTRO_FEATURES you would need this
-additional line to your local.conf:
+The meta-fri2 layer contains support for fri2-noemgd machine configuration.
+The previously supported fri2 machine with the proprietary EMGD graphics
+driver has been retired. The 'fri2-noemgd' machine configuration uses
+the open source 'vesa' kernel driver.
- DISTRO_FEATURES_append = " opengl"
-
-If you want to enable the layer that does not support EMGD graphics,
-add the following to the local.conf file:
+To enable the layer add the following to the local.conf file:
MACHINE ?= "fri2-noemgd"
@@ -135,21 +111,6 @@ At the end of a successful build, you should have a live image that
you can boot from a USB flash drive (see instructions on how to do
that below, in the section 'Booting the images from /binary').
-NOTE: The 'fri2' machine will include support for hardware video
-acceleration via gstreamer if and only if the "commercial" string is
-added to the the LICENSE_FLAGS_WHITELIST variable in your local.conf.
-
-For example:
-
- LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin commercial"
-
-The reason this is needed is to prevent the image from including
-anything that might violate the license terms of the packages used to
-implement the the video acceleration feature, such as gst-ffmpeg and
-ffmpeg. As always, please consult the licenses included in the
-specific packages for details if you use packages that require
-particular LICENSE_FLAGS.
-
As an alternative to downloading the BSP tarball, you can also work
directly from the meta-intel git repository. For each BSP in the
'meta-intel' repository, there are multiple branches, one
@@ -171,7 +132,7 @@ Under Linux, insert a USB flash drive. Assuming the USB flash drive
takes device /dev/sdf, use dd to copy the live image to it. For
example:
-# dd if=core-image-sato-fri2.hddimg of=/dev/sdf
+# dd if=core-image-sato-fri2-noemgd.hddimg of=/dev/sdf
# sync
# eject /dev/sdf
diff --git a/meta-fri2/conf/machine/fri2.conf b/meta-fri2/conf/machine/fri2.conf
deleted file mode 100644
index 83072d3..0000000
--- a/meta-fri2/conf/machine/fri2.conf
+++ /dev/null
@@ -1,47 +0,0 @@
-#@TYPE: Machine
-#@NAME: fri2
-
-#@WEBTITLE: Intel Atom E640T Processor with Intel EG20T Controller Hub Development Kit (Queens Bay) with Proprietary IEMGD Accelerated Graphics for Fish River Island II systems
-
-#@DESCRIPTION: Machine configuration for Fish River Island II systems
-
-require conf/machine/include/intel-core2-32-common.inc
-require conf/machine/include/meta-intel.inc
-require conf/machine/include/meta-intel-emgd.inc
-
-MACHINE_HWCODECS ?= "va-intel"
-XSERVERCODECS ?= "emgd-driver-video emgd-gst-plugins-va \
- emgd-gst-plugins-mixvideo gst-va-intel"
-
-MACHINE_FEATURES += "wifi 3g pcbios efi va-impl-mixvideo"
-MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-iwlwifi-6000g2a-5"
-
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
-PREFERRED_VERSION_linux-yocto = "3.10%"
-
-XSERVER ?= "${XSERVER_X86_BASE} \
- ${XSERVER_X86_EXT} \
- ${XSERVER_X86_EMGD} \
- "
-
-PREFERRED_VERSION_xserver-xorg ?= "1.9.3"
-PREFERRED_VERSION_xf86-input-synaptics ?= "1.6.3"
-PREFERRED_VERSION_xf86-input-evdev ?= "2.6.0"
-PREFERRED_VERSION_emgd-driver-bin ?= "1.18"
-PREFERRED_VERSION_libva ?= "1.0.16"
-
-# Syslinux does not know about the 64MHz uart clock and it does not detect the
-# serial device by number. Use the IO port directly and divide the baud down to
-# trick syslinux into configuring a 115200 baud.
-SYSLINUX_OPTS = "serial 0xb060 3318"
-SERIAL_CONSOLE = "115200 ttyPCH1"
-APPEND += "console=ttyPCH1,115200 console=tty0"
-
-# EFI boot will ignore this and use the EFI framebuffer at 800x600
-APPEND += "video=vesafb vga=0x318"
-
-# EMGD kernel driver needs at least 256MB of vmalloc space
-APPEND += "vmalloc=256MB"
-
-# MSI interrupts fail for the HDA device when using the EFI firmware
-APPEND += "snd_hda_intel.enable_msi=0"
diff --git a/meta-fri2/recipes-bsp/alsa-state/alsa-state/fri2/asound.state b/meta-fri2/recipes-bsp/alsa-state/alsa-state/fri2/asound.state
deleted file mode 100644
index 8a89f0b..0000000
--- a/meta-fri2/recipes-bsp/alsa-state/alsa-state/fri2/asound.state
+++ /dev/null
@@ -1,411 +0,0 @@
-state.MID {
- control.1 {
- iface MIXER
- name 'PCM Playback Volume'
- value.0 24
- value.1 24
- comment {
- access 'read write'
- type INTEGER
- count 2
- range '0 - 30'
- dbmin -4500
- dbmax 0
- dbvalue.0 -900
- dbvalue.1 -900
- }
- }
- control.2 {
- iface MIXER
- name 'PCM Playback Switch'
- value.0 true
- value.1 true
- comment {
- access 'read write'
- type BOOLEAN
- count 2
- }
- }
- control.3 {
- iface MIXER
- name 'Headphone Playback Volume'
- value.0 0
- value.1 0
- comment {
- access 'read write'
- type INTEGER
- count 2
- range '0 - 30'
- dbmin -4500
- dbmax 0
- dbvalue.0 -4500
- dbvalue.1 -4500
- }
- }
- control.4 {
- iface MIXER
- name 'Headphone Playback Switch'
- value.0 false
- value.1 false
- comment {
- access 'read write'
- type BOOLEAN
- count 2
- }
- }
- control.5 {
- iface MIXER
- name 'Rear Mic Playback Volume'
- value.0 0
- value.1 0
- comment {
- access 'read write'
- type INTEGER
- count 2
- range '0 - 31'
- dbmin -3450
- dbmax 1200
- dbvalue.0 -3450
- dbvalue.1 -3450
- }
- }
- control.6 {
- iface MIXER
- name 'Rear Mic Playback Switch'
- value.0 false
- value.1 false
- comment {
- access 'read write'
- type BOOLEAN
- count 2
- }
- }
- control.7 {
- iface MIXER
- name 'Front Mic Playback Volume'
- value.0 0
- value.1 0
- comment {
- access 'read write'
- type INTEGER
- count 2
- range '0 - 31'
- dbmin -3450
- dbmax 1200
- dbvalue.0 -3450
- dbvalue.1 -3450
- }
- }
- control.8 {
- iface MIXER
- name 'Front Mic Playback Switch'
- value.0 false
- value.1 false
- comment {
- access 'read write'
- type BOOLEAN
- count 2
- }
- }
- control.9 {
- iface MIXER
- name 'Line Playback Volume'
- value.0 0
- value.1 0
- comment {
- access 'read write'
- type INTEGER
- count 2
- range '0 - 31'
- dbmin -3450
- dbmax 1200
- dbvalue.0 -3450
- dbvalue.1 -3450
- }
- }
- control.10 {
- iface MIXER
- name 'Line Playback Switch'
- value.0 false
- value.1 false
- comment {
- access 'read write'
- type BOOLEAN
- count 2
- }
- }
- control.11 {
- iface MIXER
- name 'CD Playback Volume'
- value.0 0
- value.1 0
- comment {
- access 'read write'
- type INTEGER
- count 2
- range '0 - 31'
- dbmin -3450
- dbmax 1200
- dbvalue.0 -3450
- dbvalue.1 -3450
- }
- }
- control.12 {
- iface MIXER
- name 'CD Playback Switch'
- value.0 false
- value.1 false
- comment {
- access 'read write'
- type BOOLEAN
- count 2
- }
- }
- control.13 {
- iface MIXER
- name 'Auto-Mute Mode'
- value Disabled
- comment {
- access 'read write'
- type ENUMERATED
- count 1
- item.0 Disabled
- item.1 Enabled
- }
- }
- control.14 {
- iface MIXER
- name 'Rear Mic Boost Volume'
- value.0 0
- value.1 0
- comment {
- access 'read write'
- type INTEGER
- count 2
- range '0 - 3'
- dbmin 0
- dbmax 3000
- dbvalue.0 0
- dbvalue.1 0
- }
- }
- control.15 {
- iface MIXER
- name 'Front Mic Boost Volume'
- value.0 0
- value.1 0
- comment {
- access 'read write'
- type INTEGER
- count 2
- range '0 - 3'
- dbmin 0
- dbmax 3000
- dbvalue.0 0
- dbvalue.1 0
- }
- }
- control.16 {
- iface MIXER
- name 'Capture Switch'
- value.0 true
- value.1 true
- comment {
- access 'read write'
- type BOOLEAN
- count 2
- }
- }
- control.17 {
- iface MIXER
- name 'Capture Switch'
- index 1
- value.0 false
- value.1 false
- comment {
- access 'read write'
- type BOOLEAN
- count 2
- }
- }
- control.18 {
- iface MIXER
- name 'Capture Switch'
- index 2
- value.0 false
- value.1 false
- comment {
- access 'read write'
- type BOOLEAN
- count 2
- }
- }
- control.19 {
- iface MIXER
- name 'Capture Volume'
- value.0 25
- value.1 25
- comment {
- access 'read write'
- type INTEGER
- count 2
- range '0 - 31'
- dbmin -1200
- dbmax 3450
- dbvalue.0 2550
- dbvalue.1 2550
- }
- }
- control.20 {
- iface MIXER
- name 'Capture Volume'
- index 1
- value.0 0
- value.1 0
- comment {
- access 'read write'
- type INTEGER
- count 2
- range '0 - 31'
- dbmin -1200
- dbmax 3450
- dbvalue.0 -1200
- dbvalue.1 -1200
- }
- }
- control.21 {
- iface MIXER
- name 'Capture Volume'
- index 2
- value.0 0
- value.1 0
- comment {
- access 'read write'
- type INTEGER
- count 2
- range '0 - 31'
- dbmin -1200
- dbmax 3450
- dbvalue.0 -1200
- dbvalue.1 -1200
- }
- }
- control.22 {
- iface MIXER
- name 'Input Source'
- value Line
- comment {
- access 'read write'
- type ENUMERATED
- count 1
- item.0 'Rear Mic'
- item.1 'Front Mic'
- item.2 Line
- item.3 CD
- }
- }
- control.23 {
- iface MIXER
- name 'Input Source'
- index 1
- value 'Rear Mic'
- comment {
- access 'read write'
- type ENUMERATED
- count 1
- item.0 'Rear Mic'
- item.1 'Front Mic'
- item.2 Line
- item.3 CD
- }
- }
- control.24 {
- iface MIXER
- name 'Input Source'
- index 2
- value 'Rear Mic'
- comment {
- access 'read write'
- type ENUMERATED
- count 1
- item.0 'Rear Mic'
- item.1 'Front Mic'
- item.2 Line
- item.3 CD
- }
- }
- control.25 {
- iface MIXER
- name 'IEC958 Playback Con Mask'
- value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
- comment {
- access read
- type IEC958
- count 1
- }
- }
- control.26 {
- iface MIXER
- name 'IEC958 Playback Pro Mask'
- value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
- comment {
- access read
- type IEC958
- count 1
- }
- }
- control.27 {
- iface MIXER
- name 'IEC958 Playback Default'
- value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
- comment {
- access 'read write'
- type IEC958
- count 1
- }
- }
- control.28 {
- iface MIXER
- name 'IEC958 Playback Switch'
- value true
- comment {
- access 'read write'
- type BOOLEAN
- count 1
- }
- }
- control.29 {
- iface MIXER
- name 'IEC958 Default PCM Playback Switch'
- value true
- comment {
- access 'read write'
- type BOOLEAN
- count 1
- }
- }
- control.30 {
- iface MIXER
- name 'Master Playback Volume'
- value 24
- comment {
- access 'read write'
- type INTEGER
- count 1
- range '0 - 30'
- dbmin -4500
- dbmax 0
- dbvalue.0 -900
- }
- }
- control.31 {
- iface MIXER
- name 'Master Playback Switch'
- value true
- comment {
- access 'read write'
- type BOOLEAN
- count 1
- }
- }
-}
diff --git a/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig b/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig
deleted file mode 100644
index ffce012..0000000
--- a/meta-fri2/recipes-bsp/formfactor/formfactor/fri2/machconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-# Assume a USB mouse and keyboard are connected
-HAVE_TOUCHSCREEN=0
-HAVE_KEYBOARD=1
diff --git a/meta-fri2/recipes-core/init-ifupdown/files/fri2/interfaces b/meta-fri2/recipes-core/init-ifupdown/files/fri2/interfaces
deleted file mode 100644
index f5bb946..0000000
--- a/meta-fri2/recipes-core/init-ifupdown/files/fri2/interfaces
+++ /dev/null
@@ -1,9 +0,0 @@
-# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
-
-# The loopback interface
-auto lo
-iface lo inet loopback
-
-# Wired or wireless interfaces
-auto eth0
-iface eth0 inet dhcp
diff --git a/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf
deleted file mode 100644
index a9211e7..0000000
--- a/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config/fri2/xorg.conf
+++ /dev/null
@@ -1,60 +0,0 @@
-##
-## X Config options generated from CED
-## x11 conf skeleton
-## DriverVer=
-##
-
-Section "Screen"
- Identifier "Screen0"
- Device "IntelEMGD-0"
- Monitor "Monitor0"
- SubSection "Display"
- EndSubSection
-EndSection
-
-# Primary (First/only) display
-Section "Device"
- Identifier "IntelEMGD-0"
- Driver "emgd"
- VendorName "Intel(R) DEG"
- BoardName "Embedded Graphics"
- BusID "0:2:0"
- Screen 0
- Option "PcfVersion" "1792"
- Option "ConfigId" "1"
- Option "ALL/1/name" "e6xx"
- Option "ALL/1/General/PortOrder" "24000"
- Option "ALL/1/General/DisplayConfig" "1"
- Option "ALL/1/General/DisplayDetect" "1"
- Option "ALL/1/General/TuningWA" "1"
-
- # Primary display (upper HDMI port, driven by sDVOB)
- Option "ALL/1/Port/2/General/name" "Primary"
- Option "ALL/1/Port/2/General/Edid" "1"
- Option "ALL/1/Port/2/General/EdidAvail" "7"
- Option "ALL/1/Port/2/General/EdidNotAvail" "5"
- Option "ALL/1/Port/2/General/Rotation" "0"
- Option "ALL/1/Port/2/Attr/71" "20300"
-
- # Secondary display (lower HDMI port, driven by LVDS, 1366x768)
- Option "ALL/1/Port/4/General/name" "Secondary"
- Option "ALL/1/Port/4/General/Edid" "0"
- Option "ALL/1/Port/4/General/Rotation" "0"
-
- # Panel depth (the default 18 results in a dim display)
- # Force dither off for 24-bit panels
- Option "ALL/1/Port/4/Attr/26" "24"
- Option "ALL/1/Port/4/Attr/45" "0"
-
- # Backlight intensity and inverter frequency for E6xx CPUs
- Option "ALL/1/Port/4/Attr/70" "100"
- Option "ALL/1/Port/4/Attr/71" "20300"
-EndSection
-
-Section "ServerLayout"
- Identifier "Default Layout"
- Screen 0 "Screen0" 0 0
- # InputDevice "Mouse0" "CorePointer"
- # InputDevice "Keyboard0" "CoreKeyboard"
- # InputDevice "DevInputMice" "SendCoreEvents"
-EndSection
diff --git a/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend b/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
deleted file mode 100644
index 72d991c..0000000
--- a/meta-fri2/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
+++ /dev/null
@@ -1 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
diff --git a/meta-fri2/recipes-kernel/linux/linux-yocto-rt_3.10.bbappend b/meta-fri2/recipes-kernel/linux/linux-yocto-rt_3.10.bbappend
index 25361e8..375a0c7 100644
--- a/meta-fri2/recipes-kernel/linux/linux-yocto-rt_3.10.bbappend
+++ b/meta-fri2/recipes-kernel/linux/linux-yocto-rt_3.10.bbappend
@@ -1,16 +1,9 @@
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-COMPATIBLE_MACHINE_fri2 = "fri2"
-KMACHINE_fri2 = "fri2"
-KBRANCH_fri2 = "standard/preempt-rt/fri2"
-SRCREV_machine_pn-linux-yocto-rt_fri2 ?= "b669af08737562ef86e7cba328966d05222d3e64"
-#SRCREV_meta_pn-linux-yocto-rt_fri2 ?= "XXX"
-
COMPATIBLE_MACHINE_fri2-noemgd = "fri2-noemgd"
KMACHINE_fri2-noemgd = "fri2"
KBRANCH_fri2-noemgd = "standard/preempt-rt/fri2"
SRCREV_machine_pn-linux-yocto-rt_fri2-noemgd ?= "b669af08737562ef86e7cba328966d05222d3e64"
#SRCREV_meta_pn-linux-yocto-rt_fri2-noemgd ?= "XXX"
-KERNEL_MODULE_AUTOLOAD_append_fri2 = " iwlwifi"
KERNEL_MODULE_AUTOLOAD_append_fri2-noemgd = " iwlwifi"
diff --git a/meta-fri2/recipes-kernel/linux/linux-yocto-tiny_3.10.bbappend b/meta-fri2/recipes-kernel/linux/linux-yocto-tiny_3.10.bbappend
index b4d2dfd..3514fc6 100644
--- a/meta-fri2/recipes-kernel/linux/linux-yocto-tiny_3.10.bbappend
+++ b/meta-fri2/recipes-kernel/linux/linux-yocto-tiny_3.10.bbappend
@@ -1,13 +1,5 @@
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-COMPATIBLE_MACHINE_fri2 = "fri2"
-KMACHINE_fri2 = "fri2"
-KBRANCH_fri2 = "standard/tiny/base"
-#SRCREV_machine_pn-linux-yocto-tiny_fri2 ?= "XXX"
-#SRCREV_meta_pn-linux-yocto-tiny_fri2 ?= "XXX"
-
-
COMPATIBLE_MACHINE_fri2-noemgd = "fri2-noemgd"
KMACHINE_fri2-noemgd = "fri2"
KBRANCH_fri2-noemgd = "standard/tiny/base"
diff --git a/meta-fri2/recipes-kernel/linux/linux-yocto_3.10.bbappend b/meta-fri2/recipes-kernel/linux/linux-yocto_3.10.bbappend
index bfbb754..1fdeb21 100644
--- a/meta-fri2/recipes-kernel/linux/linux-yocto_3.10.bbappend
+++ b/meta-fri2/recipes-kernel/linux/linux-yocto_3.10.bbappend
@@ -1,15 +1,5 @@
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-COMPATIBLE_MACHINE_fri2 = "fri2"
-KMACHINE_fri2 = "fri2"
-KBRANCH_fri2 = "standard/fri2"
-KERNEL_FEATURES_append_fri2 = " features/drm-emgd/drm-emgd-1.18 cfg/vesafb"
-LINUX_VERSION_fri2 = "3.10.38"
-SRCREV_meta_fri2 = "e1f26aeccfd43bc3d7e95873ceda469b631b8473"
-SRCREV_machine_fri2 = "02f7e63e56c061617957388c23bd5cf9b05c5388"
-SRCREV_emgd_fri2 = "42d5e4548e8e79e094fa8697949eed4cf6af00a3"
-SRC_URI_fri2 = "git://git.yoctoproject.org/linux-yocto-3.10.git;protocol=git;nocheckout=1;branch=${KBRANCH},${KMETA},emgd-1.18;name=machine,meta,emgd"
-
COMPATIBLE_MACHINE_fri2-noemgd = "fri2-noemgd"
KMACHINE_fri2-noemgd = "fri2"
KBRANCH_fri2-noemgd = "standard/fri2"
@@ -18,5 +8,4 @@ LINUX_VERSION_fri2-noemgd = "3.10.38"
SRCREV_meta_fri2-noemgd = "e1f26aeccfd43bc3d7e95873ceda469b631b8473"
SRCREV_machine_fri2-noemgd = "02f7e63e56c061617957388c23bd5cf9b05c5388"
-KERNEL_MODULE_AUTOLOAD_append_fri2 = " iwlwifi"
KERNEL_MODULE_AUTOLOAD_append_fri2-noemgd = " iwlwifi"
--
1.8.1.4
More information about the meta-intel
mailing list