[meta-intel] [Patch v3 12/12] fri2-noemgd: add microcode filter parameter

[Darren Hart]

On 10/3/14, 15:14, "nitin.a.kamble at intel.com" <nitin.a.kamble at intel.com>
wrote:

>From: Nitin A Kamble <nitin.a.kamble at intel.com>
>
>The fri2-noemgd BSP is targeted to a very specific platform, and it only
>need microcodes related to a specific processor. So use the microcode
>filtering mechanism to reduce the unutilized microcode data on the target
>image.

While I understand the desire to have an example of the
UCODE_FILTER_PARAMETERS, the fri2 uses the intel-common-pkgarch, and as
such is clearly not considered space-sensitive. I would suggest dropping
this patch and adding the example below to the README instead. If this
BSPs is dropped in favor of the intel-core2-32 BSP and the
machine-setup-tool, then we will still have an example in the
documentation.

>
>Signed-off-by: Nitin A Kamble <nitin.a.kamble at intel.com>
>---
> meta-fri2/conf/machine/fri2-noemgd.conf | 3 +++
> 1 file changed, 3 insertions(+)
>
>diff --git a/meta-fri2/conf/machine/fri2-noemgd.conf
>b/meta-fri2/conf/machine/fri2-noemgd.conf
>index 345d421..e21d7e5 100644
>--- a/meta-fri2/conf/machine/fri2-noemgd.conf
>+++ b/meta-fri2/conf/machine/fri2-noemgd.conf
>@@ -12,6 +12,9 @@ require conf/machine/include/meta-intel.inc
> MACHINE_FEATURES += "wifi 3g pcbios efi"
> MACHINE_FEATURES += "intel-ucode"
> 
>+# Only take microcodes relevant to the Atom E640T processor from the
>FRI2 board
>+UCODE_FILTER_PARAMETERS = "-s 0x00020661"
>+
> MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-iwlwifi-6000g2a-5"
> 
> PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
>-- 
>1.8.1.4
>
>-- 
>_______________________________________________
>meta-intel mailing list
>meta-intel at yoctoproject.org
>https://lists.yoctoproject.org/listinfo/meta-intel
>


-- 
Darren Hart
Intel Open Source Technology Center