[meta-intel] [PATCH 0/5] [DORA] meta-isg: add new BSP layer for Valley Island

[Chang, Rebecca Swee Fun]

Hi Tom,

Here is my build configuration:

Build Configuration:
BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-12.10"
TARGET_SYS        = "x86_64-poky-linux"
MACHINE           = "valleyisland-64"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5.1"
TUNE_FEATURES     = "m64 core2"
TARGET_FPU        = ""
meta              
meta-yocto        
meta-yocto-bsp    = "dora:023c35795ff8edd79bb27848a01dd49239f052d4"
meta-intel        
meta-tlk          
meta-valleyisland = "dora:99d1f2f61feb5b338d659babe32ad4ae89e9bf3b"

Rebecca

> -----Original Message-----
> From: Zanussi, Tom
> Sent: 21 March, 2014 8:54 PM
> To: Chang, Rebecca Swee Fun
> Cc: 'Darren Hart'; meta-intel at yoctoproject.org
> Subject: Re: [meta-intel] [PATCH 0/5] [DORA] meta-isg: add new BSP layer
> for Valley Island
> 
> On Fri, 2014-03-21 at 05:41 -0500, Chang, Rebecca Swee Fun wrote:
> > > -----Original Message-----
> > > From: Darren Hart [mailto:dvhart at linux.intel.com]
> > > Sent: 21 March, 2014 12:29 PM
> > > To: Chang, Rebecca Swee Fun; Zanussi, Tom
> > > Cc: meta-intel at yoctoproject.org
> > > Subject: Re: [meta-intel] [PATCH 0/5] [DORA] meta-isg: add new BSP
> > > layer for Valley Island
> > >
> > > On 3/20/14, 20:52, "Chang, Rebecca Swee Fun"
> > > <rebecca.swee.fun.chang at intel.com> wrote:
> > > >
> > > >The changes in linux-yocto-3.10 was merged. And I sent the pull
> > > >request for meta-intel after linux-yocto-3.10 was updated. I
> > > >noticed that the commit ids are not the one I'm using. Is the
> > > >recipe goes wrong some where else?
> > > >
> > > >I've also checked my branch (rebeccas/meta-valleyisland-dora-dev)
> > > >in meta-intel-contrib. They are same as what I am sending out. But
> > > >your build error log showing the wrong commit id.
> > > >
> > > >I need to check again to confirm.
> > >
> > > Ah, the commit Ids will be different after Bruce adds his
> > > Signed-off-by and if he merged it with anything pending. Always
> > > check the linux-yocto tree for new commit Ids after your changes have
> been merged.
> > >
> > No, I think my recipe is correct. I have send out a recipe with commit
> > ids with Bruce's signed-off. However, Tom's build failure was building
> > at different commit id.
> >
> > In my recipe, I am appending:
> > SRCREV_machine-linux-yocto_valleyisland-32 ?=
> "61dde96f97bb5b1ed4c11caf9a857d55ad8f6e17"
> > SRCREV_meta-linux-yocto_valleyisland-32 ?=
> "99c503a92885060bebf2bba6747735e8e9346a40"
> >
> > From Tom's build log:
> > 3.10.32+gitAUTOINC+6ad20f049a_c03195ed6e-r0
> > Which does not match with my recipe.
> >
> > I don't have compiling issue here. Can Tom please help to check his build
> again?
> > Thanks a lot.
> >
> 
> I'll check, but I don't expect any difference - this was from a clean build after
> seeing it the first time.
> 
> But just to make sure we're on the same page, can you verify that you're
> using the same poky and meta-intel SRCREVs as in my error message (or
> send me yours)?
> 
> Thanks,
> 
> Tom
> 
> > Rebecca
>