[meta-intel] [PATCH 2/6] meta-valleyisland: new bsp layer for Intel Atom E38XX Processor
rebecca.swee.fun.chang at intel.com
rebecca.swee.fun.chang at intel.com
Tue Feb 4 09:21:50 PST 2014
From: "Chang, Rebecca Swee Fun" <rebecca.swee.fun.chang at intel.com>
This layer provides support for Intel Atom E38XX Processor
product line.
Signed-off-by: Chang, Rebecca Swee Fun <rebecca.swee.fun.chang at intel.com>
---
meta-isg/meta-valleyisland/COPYING.MIT | 17 +++
meta-isg/meta-valleyisland/README | 217 ++++++++++++++++++++++++++++
meta-isg/meta-valleyisland/README.sources | 18 +++
meta-isg/meta-valleyisland/conf/layer.conf | 14 ++
4 files changed, 266 insertions(+)
create mode 100644 meta-isg/meta-valleyisland/COPYING.MIT
create mode 100644 meta-isg/meta-valleyisland/README
create mode 100644 meta-isg/meta-valleyisland/README.sources
create mode 100644 meta-isg/meta-valleyisland/conf/layer.conf
diff --git a/meta-isg/meta-valleyisland/COPYING.MIT b/meta-isg/meta-valleyisland/COPYING.MIT
new file mode 100644
index 0000000..89de354
--- /dev/null
+++ b/meta-isg/meta-valleyisland/COPYING.MIT
@@ -0,0 +1,17 @@
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
diff --git a/meta-isg/meta-valleyisland/README b/meta-isg/meta-valleyisland/README
new file mode 100644
index 0000000..7f2b574
--- /dev/null
+++ b/meta-isg/meta-valleyisland/README
@@ -0,0 +1,217 @@
+This README file contains information on building the meta-valleyisland
+BSP layer, and booting the images contained in the /binary directory.
+Please see the corresponding sections below for details.
+
+The Valley Island BSP consists of two versions:
+1. 32-bit Valley Island
+2. 64-bit Valley Island
+
+The BSP is made specifically for Intel Atom E38XX Processor E38XX
+Development Kit (formerly known as Valley Island). This BSP integrates
+Intel Graphics for Linux driver as the integrated graphics.
+
+Valley Island BSP is meant to support Valley Island Development
+Kit, "Bayley Bay" CRB and "Bakersport" CRB.
+
+Further information on the platforms supported by this BSP can be
+found here:
+
+ http://www.intel.com/content/www/us/en/intelligent-systems/bay-trail/atom-processor-e3800-family-overview.html
+
+Information on all Intel® embedded platforms can be found here:
+
+ http://www.intel.com/p/en_US/embedded/hwsw/hardware
+
+Dependencies
+============
+
+This layer depends on:
+
+ URI: git://git.openembedded.org/bitbake
+ branch: master
+
+ URI: git://git.openembedded.org/openembedded-core
+ layers: meta
+ branch: dylan
+
+ URI: git://git.yoctoproject.org/meta-intel
+ layers: intel
+ branch: dylan
+
+Patches
+=======
+
+Please submit any patches against this BSP to the Yocto mailing list
+(yocto at yoctoproject.org) and cc: the maintainer:
+
+Maintainer: Chang, Rebecca Swee Fun <rebecca.swee.fun.chang at intel.com>
+
+Please see the meta-isg/MAINTAINERS file for more details.
+
+Table of Contents
+=================
+
+ I. Building the meta-valleyisland BSP layer
+ II. Booting the images in /binary
+III. Device Notes
+ a. Boot Loader
+ b. I/O drivers
+ c. LPIO ACPI enumeration support
+ IV. Known Issues
+ a. I/O drivers
+
+
+I. Building the meta-valleyisland BSP layer
+===========================================
+
+In order to build an image with BSP support for a given release, you
+need to download the corresponding BSP tarball from the 'Board Support
+Package (BSP) Downloads' page of the Yocto Project website.
+
+Having that done, and assuming you have extracted the BSP tarball contents
+at the top-level of your Yocto build tree, you can build a valleyisland
+image by adding the location of the meta-valleyisland layer to
+bblayers.conf, along with the meta-intel layer itself (to access
+common metadata shared between BSPs) e.g.:
+
+ yocto/meta-intel \
+ yocto/meta-intel/meta-isg/meta-valleyisland \
+
+To enable the 32-bit Valley Island layer, add the valleyisland32 MACHINE to local.conf:
+
+ MACHINE ?= "valleyisland-32"
+
+To enable the 64-bit Valley Island layer, add the valleyisland64 MACHINE to local.conf:
+
+ MACHINE ?= "valleyisland-64"
+
+You should then be able to build a valleyisland image as such:
+
+ $ source oe-init-build-env
+ $ bitbake core-image-sato
+
+At the end of a successful build, you should have a live image that
+you can boot from a USB flash drive (see instructions on how to do
+that below, in the section 'Booting the images from /binary').
+
+As an alternative to downloading the BSP tarball, you can also work
+directly from the meta-intel git repository. For each BSP in the
+'meta-intel' repository, there are multiple branches, one
+corresponding to each major release starting with 'laverne' (0.90), in
+addition to the latest code which tracks the current master (note that
+not all BSPs are present in every release). Instead of extracting a
+BSP tarball at the top level of your yocto build tree, you can
+equivalently check out the appropriate branch from the meta-intel
+repository at the same location.
+
+II. Booting the images in /binary
+=================================
+
+This BSP contains bootable live images, which can be used to directly
+boot Yocto off of a USB flash drive.
+
+Under Linux, insert a USB flash drive. Assuming the USB flash drive
+takes device /dev/sdf, use dd to copy the live image to it. For
+example:
+
+# dd if=core-image-sato-valleyisland-32.hddimg of=/dev/sdf
+# sync
+# eject /dev/sdf
+
+This should give you a bootable USB flash device. Insert the device
+into one of the USB host ports on the target, and power on. This
+should result in a system booted to the Sato graphical desktop.
+
+If you want a terminal, use the arrows at the top of the UI to move to
+different pages of available applications, one of which is named
+'Terminal'. Clicking that should give you a root terminal.
+
+If you want to ssh into the system, you can use the root terminal to
+ifconfig the IP address and use that to ssh in. The root password is
+empty, so to log in type 'root' for the user name and hit 'Enter' at
+the Password prompt: and you should be in.
+
+----
+
+If you find you're getting corrupt images on the USB (it doesn't show
+the syslinux boot: prompt, or the boot: prompt contains strange
+characters), try doing this first:
+
+# dd if=/dev/zero of=/dev/sdf bs=1M count=512
+
+
+III. Device Notes
+=================
+a. Boot Loader
+--------------
+BIOS : Bayley Bay 072_011
+EC : KSC v3.10 for Bayley Bay/Bakersport CRB Fab3
+
+Required settings in BIOS
+
+ Turn off Secure-boot:
+ Device Manager -> System Setup -> Boot -> Security Boot -> Disable
+
+ Turn off LPE Audio Support:
+ Device Manager -> System Setup -> South Cluster Configuration ->
+ Audio Configuration -> LPE Audio Support -> Disable
+
+Please use EFI mode for all boot medium types, i.e. USB disk and Hard Disk.
+Setting in BIOS:
+
+ Choose boot medium:
+ Boot Manager -> EFI (Hard Drive/USB Device)
+
+ Save settings:
+ Boot Maintenance Manager -> Boot Options -> Change Boot Order ->
+ Change the order -> Commmit Changes and Exit
+
+
+b. I/O drivers
+--------------
+The I2C controller driver supports fast mode by default.
+To enable standard mode, appends the arguments to kernel command line.
+
+ "i2c-designware-pci.force_std_mode=1" (PCI mode)
+ "i2c-designware-platform.force_std_mode=1" (ACPI mode)
+
+
+To use SMBUS driver, you'll need to append the following argument to
+the kernel command line.
+
+ "acpi_enforce_resources=lax"
+
+
+c. LPIO ACPI enumeration support
+--------------------------------
+Required settings in BIOS
+
+ Turn on ACPI mode
+ Device Manager -> System Setup -> South Cluster Configuration ->
+ LPSS & SCC Configuration -> LPSS & SCC Device Mode -> ACPI mode
+
+If you would like to use the ACPI mode LPSS device, press e to edit
+kernel command line when you see the Yocto GRUB Menu during boot up.
+Append the following argument at the end of kernel boot command line.
+
+ "byt-board.disable=1"
+
+
+Some LPSS devices are hidden in ACPI mode to support Windows. To enable
+these devices, toggle the following in the BIOS Menu.
+
+Device Manager -> System Setup -> South Cluster Configuration -> Miscellaneous
+Configuration -> Unsupported LPSS Device and select "Unhide"
+
+
+IV. Known Limitations
+=====================
+a. I/O drivers
+--------------
+HSUART:
+
+When runninig PCI mode HSUART at baud rate 2M and above, you may observe
+kernel message "serial8250: too much work for irq...". Most of the time it
+won't disrupt the transfer and able to complete without data corruption.
+However, occasionally your transfer may halt when that kernel message appear.
+In this case, you would need to re-open the HSUART port.
diff --git a/meta-isg/meta-valleyisland/README.sources b/meta-isg/meta-valleyisland/README.sources
new file mode 100644
index 0000000..9c33a64
--- /dev/null
+++ b/meta-isg/meta-valleyisland/README.sources
@@ -0,0 +1,18 @@
+The sources for the packages comprising the images shipped with this
+BSP can be found at the following location:
+
+http://downloads.yoctoproject.org/mirror/sources/
+
+The metadata used to generate the images shipped with this BSP, in
+addition to the code contained in this BSP, can be found at the
+following location:
+
+http://downloads.yoctoproject.org/releases/yocto/yocto-1.4/poky-dylan-9.0.2.tar.bz2
+
+The metadata used to generate the images shipped with this BSP, in
+addition to the code contained in this BSP, can also be found at the
+following locations:
+
+git://git.yoctoproject.org/poky.git
+
+git://git.yoctoproject.org/meta-intel
diff --git a/meta-isg/meta-valleyisland/conf/layer.conf b/meta-isg/meta-valleyisland/conf/layer.conf
new file mode 100644
index 0000000..0165aea
--- /dev/null
+++ b/meta-isg/meta-valleyisland/conf/layer.conf
@@ -0,0 +1,14 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have a recipes directory, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
+ ${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "valleyisland"
+BBFILE_PATTERN_valleyisland := "^${LAYERDIR}/"
+BBFILE_PRIORITY_valleyisland = "6"
+
+LAYERDEPENDS_valleyisland = "intel"
+
+LICENSE_PATH += "${LAYERDIR}/custom-licenses"
--
1.7.10.4
More information about the meta-intel
mailing list