[meta-intel] meta-intel Digest, Vol 12, Issue 10

Sun Oct 13 20:29:18 PDT 2013

> -----Original Message-----
> From: Svancara, Randall [mailto:rsvancara at wsu.edu]
> Sent: Monday, October 14, 2013 10:30 AM
> To: Ong, Boon Leong
> Cc: meta-intel at yoctoproject.org
> Subject: RE: meta-intel Digest, Vol 12, Issue 10
> 
> I grabbed
> 
> wget http://downloads.yoctoproject.org/releases/yocto/yocto-
> 1.3/machines/cedartrail/meta-cedartrail-danny-8.0.0.tar.bz2
> 
[Ong, Boon Leong] 
I freshly downloaded the package above and it contains the correct
meta-intel/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.14.bb

Could you check where did you pick up this meta-intel/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.18.bb from. 
My guess is in your midst of trying, you could have overwrite something...

Good luck!

> ________________________________________
> From: Ong, Boon Leong [boon.leong.ong at intel.com]
> Sent: Sunday, October 13, 2013 7:26 PM
> To: Svancara, Randall
> Cc: meta-intel at yoctoproject.org
> Subject: RE: meta-intel Digest, Vol 12, Issue 10
> 
> > -----Original Message-----
> > From: Svancara, Randall [mailto:rsvancara at wsu.edu]
> > Sent: Monday, October 14, 2013 10:08 AM
> > To: Ong, Boon Leong
> > Cc: meta-intel at yoctoproject.org
> > Subject: RE: meta-intel Digest, Vol 12, Issue 10
> >
> > I made an attempt at  your instructions, with one modification.  I did
> > a wget to download the cedartrail bsp layer and extracted it over the
> > top of the meta-intel directory.
> >
> [Ong, Boon Leong]
> Which package have you wget?
> Based on http://git.yoctoproject.org/cgit/cgit.cgi/meta-
> intel/tree/common/recipes-graphics/xorg-driver?h=danny , There is only
> common/recipes-graphics/xorg-driver/emgd-driver-bin_1.16.bb
> 
> For v1.18, it is on http://git.yoctoproject.org/cgit/cgit.cgi/meta-
> intel/tree/common/recipes-graphics/xorg-driver/emgd-driver-
> bin_1.18.bb?h=dora
> It seems like that you grab the wrong meta-intel package and try to use it on
> danny. You need to make sure that both poky & meta-intel are having the
> same version.
> 
> > I attempted to try a build and I ended up with this error:
> >
> > ERROR: ParseError at /data/development/poky/meta-
> > intel/common/recipes-graphics/xorg-driver/emgd-driver-bin_1.18.bb:37:
> > Could not inherit file classes/distro_features_check.bbclass
> > ERROR: Command execution failed: Exited with 1
> >
> > Summary: There were 2 ERROR messages shown, returning a non-zero exit
> > code.
> >
> > Any ideas?
> > ________________________________________
> > From: meta-intel-bounces at yoctoproject.org [meta-intel-
> > bounces at yoctoproject.org] on behalf of Svancara, Randall
> > [rsvancara at wsu.edu]
> > Sent: Sunday, October 13, 2013 6:32 PM
> > To: Ong, Boon Leong
> > Cc: meta-intel at yoctoproject.org
> > Subject: Re: [meta-intel] meta-intel Digest, Vol 12, Issue 10
> >
> > Thanks for the awesome instructions.  I am going to give this a try!
> >
> > Randall
> > ________________________________________
> > From: Ong, Boon Leong [boon.leong.ong at intel.com]
> > Sent: Sunday, October 13, 2013 6:17 PM
> > To: Svancara, Randall
> > Cc: meta-intel at yoctoproject.org
> > Subject: RE: meta-intel Digest, Vol 12, Issue 10
> >
> > > Message: 1
> > > Date: Sun, 13 Oct 2013 17:48:39 +0000
> > > From: "Svancara, Randall" <rsvancara at wsu.edu>
> > > To: "meta-intel at yoctoproject.org" <meta-intel at yoctoproject.org>
> > > Subject: [meta-intel] Yocto Intel Atom N2600/N2800/D2550 Cedartrail
> > > Message-ID:
> > >       <1F880D7A2494B346B5AB96481EAE704A0EA486DB at EXMB-
> > > 03.ad.wsu.edu>
> > > Content-Type: text/plain; charset="iso-8859-1"
> > >
> > > I am trying to use Yocto to build a version of embedded Linux that
> > > can work on an Intel Atom D2550.
> > >
> > > I am following  your instructions located here:
> > >
> > > https://www.yoctoproject.org/download/intel%C2%AE-
> atom%E2%84%A2-
> > > n2600n2800d2550-wnm10-chipset-cedar-trail-open-source-graphics
> > >
> > > I am a little vague on some of the details of the instructions and
> > > would appreciate any clarification that may able to provide.
> > >
> > > 1.  I download the Danny version of the Yocto project here:
> > > http://mirrors.kernel.org/yocto/yocto/yocto-1.3/poky-danny-8.0.1.tar
> > > .b
> > > z2
> > >
> > > 2.  Extract the tarball into a directory called /data/YOCTO.
> > >
> > > 3.  Here is where I am confused.  I use git to clone the following:
> > >
> > > git clone git://git.openembedded.org/bitbake
> > > git clone git://git.openembedded.org/openembedded-core
> > > git clone git://git.yoctoproject.org/meta-intel\
> > > wget http://downloads.yoctoproject.org/releases/yocto/yocto-
> > > 1.3.1/machines/cedartrail/meta-cedartrail-danny-8.0.1.tar.bz2
> > >
> > > 4. I know have the following directories in /data /data/bitbake
> > > /data/openembedded-core /data/meta-intel /data/YOCTO
> > > /data/meta-cedartrail-danny-8.0.1.tar.bz2
> > >
> > > 5.  I extract the meta-cedartrail-danny-8.0.1.tar.bz2 file.  I place
> > > the meta- cedartrail/meta-cedartrail sub directory into the
> > > /data/meta-
> > intel directory.
> > >
> > > At this point, I am lost as to where I need to place the bitbake and
> > > openembedded directories.  I have tried so many variations of
> > > copying directories around and nothing seems to work.  I always end
> > > up with errors in the build.  I am using Ubuntu 12.04.
> > >
> > > I appreciate any assistance you may be able to provide.
> > [Ong, Boon Leong]
> > You have two options when building a BSP:
> > (A) download packages + build
> > (B) git clone + build
> >
> > (A) is a packaged release according to a stable version and (B) if you
> > want to pick new git commit.
> >
> > I normally do (B) as follow:
> >
> > Assuming you are at /home/user/development # cd
> /home/user/development
> > # git clone  git://git.yoctoproject.org/poky.git
> > # cd /home/user/development/poky
> > # git checkout -b danny --track origin/danny # git clone
> > git://git.yoctoproject.org/meta-intel.git
> > # cd /home/user/development /poky/meta-intel # git checkout -b danny
> > -- track origin/danny # cd /home/user/development # mkdir build # cd
> > /home/user/development/build # source
> > /home/user/development/poky/oe-init-build-env <your-bsp-build-name>
> #
> > cd /home/user/development/build/<your-bsp-build-name>
> > # vi conf/bblayer.bb
> >
> > BBLAYERS ?= " \
> >   /home/user/development/poky/meta \
> >   /home/user/development/poky/meta-yocto \
> >   /home/user/development/poky/meta-yocto-bsp \
> >   /home/user/development/poky/meta-intel \
> >   /home/user/development/poky/meta-intel/meta-cedartrail \
> >   "
> >
> > # vi conf/local.bb
> > // uncomment the following
> > BB_NUMBER_THREADS = "4"
> > PARALLEL_MAKE = "-j 4"
> >
> > // add the following line for cedartrail MACHINE ?= "cedartrail"
> > OR
> > MACHINE ?= "cedartrail-nopvr"
> > as listed below http://git.yoctoproject.org/cgit/cgit.cgi/meta-
> > intel/tree/meta-cedartrail/conf/machine?h=danny
> >
> > # cd /home/user/development/build/<your-bsp-build-name>
> > # bitbake core-image-sato
> >
> > _______________________________________________
> > meta-intel mailing list
> > meta-intel at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-intel