[meta-intel] are multiple kernel versions supported by meta-intel for crownbay under dylan-9.0.2?

[Chad Bishop]

> -----Original Message-----
> From: Kamble, Nitin A [mailto:nitin.a.kamble at intel.com]
> Sent: Thursday, October 10, 2013 3:18 PM
> To: Chad Bishop; meta-intel at yoctoproject.org
> Subject: RE: [meta-intel] are multiple kernel versions supported by meta-intel
> for crownbay under dylan-9.0.2?
> 
> 
> 
> > -----Original Message-----
> > From: meta-intel-bounces at yoctoproject.org [mailto:meta-intel-
> > bounces at yoctoproject.org] On Behalf Of Chad Bishop
> > Sent: Thursday, October 10, 2013 10:56 AM
> > To: meta-intel at yoctoproject.org
> > Subject: [meta-intel] are multiple kernel versions supported by
> > meta-intel for crownbay under dylan-9.0.2?
> >
> > Hello meta-intel team,
> >
> > I see the following under :
> >
> > poky-dylan-9.0.2/meta-intel/meta-crownbay/recipes-kernel/linux/
> >
> > linux-yocto_3.2.bbappend  linux-yocto-rt_3.2.bbappend linux-
> > yocto_3.4.bbappend  linux-yocto-rt_3.4.bbappend linux-
> > yocto_3.8.bbappend  linux-yocto-rt_3.8.bbappend linux-yocto-
> > dev.bbappend
> >
> > I see that :
> >
> > PREFERRED_VERSION_linux-yocto ?= "3.8%"
> >
> > In
> >
> > poky-dylan-9.0.2/meta-intel/meta-crownbay/conf/machine/crownbay.conf
> >
> > My question to you folks is "should I be able to build a working
> > crownbay image with a 3.2 and 3.4 kernel?"
> >
> > More importantly, "should I expect EMGD to work under that
> > configuration?"
> >
> > If not, what purpose do those files serve in this release?
> >
> > I apologize if these are ignorant questions.  Any light that you might
> > shed on this subject is welcome.
> 
> Hi Chad,
>   These older kernel should work. Although they are not actively tested and
> validated as the releases are validated with the default kernel.
> I would suggest you to give them a try as per your need, and if you see any
> issue report it here.
> 
> Thanks,
> Nitin

Hello Nitin,

Thank you for the timely response.

Can you please advise the proper method for making this configuration change?

Is it as simple as altering :

PREFERRED_VERSION_linux-yocto ?= "3.8%"

To 

PREFERRED_VERSION_linux-yocto ?= "3.4%"

In crownbay.conf

Best Regards,
Chad


> 
> 
> >
> > Thank You,
> >
> > Chad Bishop
> > Senior Software Engineer
> > Applied Technology
> > Raven Industries
> > Phone: 605.357.0441
> > http://www.ravenprecision.com
> >
> > This message and attachment(s) may contain confidential and/or
> > privileged information.  Access, disclosure, copying, distribution or
> > reliance on any content of this message by anyone other than the
> > addressee is prohibited.  If received in error, please advise the
> > sender immediately by reply e-mail and delete this message.
> >
> >
> > _______________________________________________
> > meta-intel mailing list
> > meta-intel at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-intel


This message and attachment(s) may contain confidential and/or 
privileged information.  Access, disclosure, copying, 
distribution 
or reliance on any content of this message by anyone other than 
the addressee is prohibited.  If received in error, please advise 
the sender immediately by reply e-mail and delete this message.