[meta-intel] [PATCH 1/5] meta-mohonpeak : new BSP layer for Intel Atom Processor C2000

Tue Nov 26 19:13:36 PST 2013

From: Ong Boon Leong <boon.leong.ong at intel.com>

This layer provides support for Intel Atom Processor C2000
product line.

Signed-off-by: Ong Boon Leong <boon.leong.ong at intel.com>
---
 meta-mohonpeak/COPYING.MIT     |   17 ++++
 meta-mohonpeak/README          |  167 ++++++++++++++++++++++++++++++++++++++++
 meta-mohonpeak/README.sources  |   18 +++++
 meta-mohonpeak/conf/layer.conf |   12 +++
 4 files changed, 214 insertions(+)
 create mode 100644 meta-mohonpeak/COPYING.MIT
 create mode 100644 meta-mohonpeak/README
 create mode 100644 meta-mohonpeak/README.sources
 create mode 100644 meta-mohonpeak/conf/layer.conf

diff --git a/meta-mohonpeak/COPYING.MIT b/meta-mohonpeak/COPYING.MIT
new file mode 100644
index 0000000..89de354
--- /dev/null
+++ b/meta-mohonpeak/COPYING.MIT
@@ -0,0 +1,17 @@
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
diff --git a/meta-mohonpeak/README b/meta-mohonpeak/README
new file mode 100644
index 0000000..5d98b78
--- /dev/null
+++ b/meta-mohonpeak/README
@@ -0,0 +1,167 @@
+This README file contains information on building the meta-mohonpeak
+BSP layer, and booting the images contained in the /binary directory.
+Please see the corresponding sections below for details.
+
+The mohonpeak platform consists of two versions:
+1. 32-bit Mohon Peak
+2. 64-bit Mohon Peak
+
+The Mohon Peak platform consists of the Intel Atom Processor C2000
+Product Family (Formerly Rangeley)
+
+This BSP assumes ASPEED Technology graphics card is being used.
+
+Further information about the platforms supported by this BSP can be
+found here:
+
+  http://www.intel.com/content/www/us/en/intelligent-systems/rangeley/
+    atom-c2000-product-family-based-platforms-overview.html
+
+Information on all Intel® embedded platforms can be found here:
+
+  http://www.intel.com/p/en_US/embedded/hwsw/hardware
+
+
+Yocto Project Compatible
+========================
+
+This BSP is compatible with the Yocto Project as per the requirements
+listed here:
+
+  https://www.yoctoproject.org/webform/yocto-project-compatible-registration
+
+
+Dependencies
+============
+
+This layer depends on:
+
+  URI: git://git.openembedded.org/bitbake
+  branch: master
+
+  URI: git://git.openembedded.org/openembedded-core
+  layers: meta
+  branch: master
+
+  URI: git://git.yoctoproject.org/meta-intel
+  layers: intel
+  branch: master
+
+
+Patches
+=======
+
+Please submit any patches against this BSP to the Yocto mailing list
+(yocto at yoctoproject.org) and cc: the maintainer:
+
+Maintainer: Ong Boon Leong <boon.leong.ong at intel.com>
+
+Please see the meta-intel/MAINTAINERS file for more details.
+
+
+Table of Contents
+=================
+
+  I. Building the meta-mohonpeak BSP layer
+ II. Booting the images in /binary
+III. Enabling Intel DPDK Technology
+ IV. Enabling Intel QuickAssist Technology
+
+I. Building the meta-mohonpeak BSP layer
+=======================================
+
+In order to build an image with BSP support for a given release, you
+need to download the corresponding BSP tarball from the 'Board Support
+Package (BSP) Downloads' page of the Yocto Project website.
+
+Having done that, and assuming you extracted the BSP tarball contents
+at the top-level of your yocto build tree, you can build a mohonpeak
+image by adding the location of the meta-mohonpeak layer to
+bblayers.conf, along with the meta-intel layer itself (to access
+common metadata shared between BSPs) e.g.:
+
+  yocto/meta-intel \
+  yocto/meta-intel/meta-mohonpeak \
+
+To enable the 32-bit Mohon Peak layer, add the mohonpeak32 MACHINE to local.conf:
+
+  MACHINE ?= "mohonpeak32"
+
+To enable the 64-bit Mohon Peak layer, add the mohonpeak64 MACHINE to local.conf:
+
+  MACHINE ?= "mohonpeak64"
+
+You should then be able to build a mohonpeak image as such:
+
+  $ source oe-init-build-env
+  $ bitbake core-image-sato
+
+At the end of a successful build, you should have a live image that
+you can boot from a USB flash drive (see instructions on how to do
+that below, in the section 'Booting the images from /binary').
+
+As an alternative to downloading the BSP tarball, you can also work
+directly from the meta-intel git repository.  For each BSP in the
+'meta-intel' repository, there are multiple branches, one
+corresponding to each major release starting with 'laverne' (0.90), in
+addition to the latest code which tracks the current master (note that
+not all BSPs are present in every release).  Instead of extracting a
+BSP tarball at the top level of your yocto build tree, you can
+equivalently check out the appropriate branch from the meta-intel
+repository at the same location.
+
+
+II. Booting the images in /binary
+=================================
+
+This BSP contains bootable live images, which can be used to directly
+boot Yocto off of a USB flash drive.
+
+Under Linux, insert a USB flash drive.  Assuming the USB flash drive
+takes device /dev/sdf, use dd to copy the live image to it.  For
+example:
+
+# dd if=core-image-sato-mohonpeak64.hddimg of=/dev/sdf
+# sync
+# eject /dev/sdf
+
+This should give you a bootable USB flash device.  Insert the device
+into a bootable USB socket on the target, and power on.  This should
+result in a system booted to the Sato graphical desktop.
+
+If you want a terminal, use the arrows at the top of the UI to move to
+different pages of available applications, one of which is named
+'Terminal'.  Clicking that should give you a root terminal.
+
+If you want to ssh into the system, you can use the root terminal to
+ifconfig the IP address and use that to ssh in.  The root password is
+empty, so to log in type 'root' for the user name and hit 'Enter' at
+the Password prompt: and you should be in.
+
+----
+
+If you find you're getting corrupt images on the USB (it doesn't show
+the syslinux boot: prompt, or the boot: prompt contains strange
+characters), try doing this first:
+
+# dd if=/dev/zero of=/dev/sdf bs=1M count=512
+
+
+III. Enabling Intel DPDK Technology
+===================================
+
+There are recipes available for the 'Intel Data Plane Development Kit
+Technology components for use with this BSP.  Please contact your
+Intel Field Sales Representative or visit Intel Embedded Design
+Center (www.intel.com/p/en_US/embedded/designcenter) for instructions on how
+to locate and use these recipes.
+
+
+IV. Enabling Intel QuickAssist Technology
+=========================================
+
+There are recipes available for the 'Intel QuickAssist Technology'
+components for use with this BSP.  Please contact your
+Intel Field Sales Representative or visit Intel Embedded Design
+Center (www.intel.com/p/en_US/embedded/designcenter) for instructions on how
+to locate and use these recipes.
diff --git a/meta-mohonpeak/README.sources b/meta-mohonpeak/README.sources
new file mode 100644
index 0000000..0765412
--- /dev/null
+++ b/meta-mohonpeak/README.sources
@@ -0,0 +1,18 @@
+The sources for the packages comprising the images shipped with this
+BSP can be found at the following location:
+
+http://downloads.yoctoproject.org/mirror/sources/
+
+The metadata used to generate the images shipped with this BSP, in
+addition to the code contained in this BSP, can be found at the
+following location:
+
+http://www.yoctoproject.org/downloads/yocto-1.4.2/poky-dylan-9.0.2.tar.bz2
+
+The metadata used to generate the images shipped with this BSP, in
+addition to the code contained in this BSP, can also be found at the
+following locations:
+
+git://git.yoctoproject.org/poky.git
+
+git://git.yoctoproject.org/meta-intel.git
diff --git a/meta-mohonpeak/conf/layer.conf b/meta-mohonpeak/conf/layer.conf
new file mode 100644
index 0000000..93ec112
--- /dev/null
+++ b/meta-mohonpeak/conf/layer.conf
@@ -0,0 +1,12 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH := "${BBPATH}:${LAYERDIR}"
+
+# We have a recipes directory, add to BBFILES
+BBFILES := "${BBFILES} ${LAYERDIR}/recipes-*/*/*.bb \
+	${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "mohonpeak"
+BBFILE_PATTERN_mohonpeak := "^${LAYERDIR}/"
+BBFILE_PRIORITY_mohonpeak = "6"
+
+LAYERDEPENDS_mohonpeak = "intel"
-- 
1.7.10.4

